extbrotli 0.0.1.PROTOTYPE2-x86-mingw32

data/contrib/brotli/README.md

@@ -0,0 +1,18 @@
+brotli
+======
+
+Brotli is a generic-purpose lossless compression algorithm that compresses data
+using a combination of a modern variant of the LZ77 algorithm, Huffman coding
+and 2nd order context modeling, with a compression ratio comparable to the best
+currently available general-purpose compression methods. It is similar in speed
+with deflate but offers more dense compression.
+
+The specification of the Brotli Compressed Data Format is defined in the
+following internet draft:
+http://www.ietf.org/id/draft-alakuijala-brotli
+
+Brotli is open-sourced under the Apache License, Version 2.0, see the LICENSE
+file.
+
+Brotli mailing list:
+https://groups.google.com/forum/#!forum/brotli

data/contrib/brotli/dec/bit_reader.c

@@ -0,0 +1,55 @@
+/* Copyright 2013 Google Inc. All Rights Reserved.
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+   http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+*/
+
+/* Bit reading helpers */
+
+#include <stdlib.h>
+
+#include "./bit_reader.h"
+#include "./port.h"
+
+#if defined(__cplusplus) || defined(c_plusplus)
+extern "C" {
+#endif
+
+void BrotliInitBitReader(BrotliBitReader* const br, BrotliInput input) {
+  BROTLI_DCHECK(br != NULL);
+
+  br->input_ = input;
+  br->val_ = 0;
+  br->bit_pos_ = 0;
+  br->avail_in = 0;
+  br->eos_ = 0;
+  br->next_in = br->buf_;
+}
+
+
+void BrotliWarmupBitReader(BrotliBitReader* const br) {
+  size_t i;
+  br->val_ = 0;
+  for (i = 0; i < sizeof(br->val_); ++i) {
+#if (BROTLI_64_BITS_LITTLE_ENDIAN)
+    br->val_ |= ((uint64_t)*br->next_in) << (8 * i);
+#else
+    br->val_ |= ((uint32_t)*br->next_in) << (8 * i);
+#endif
+    ++br->next_in;
+    --br->avail_in;
+  }
+}
+
+#if defined(__cplusplus) || defined(c_plusplus)
+}    /* extern "C" */
+#endif

data/contrib/brotli/dec/bit_reader.h

@@ -0,0 +1,256 @@
+/* Copyright 2013 Google Inc. All Rights Reserved.
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+   http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+*/
+
+/* Bit reading helpers */
+
+#ifndef BROTLI_DEC_BIT_READER_H_
+#define BROTLI_DEC_BIT_READER_H_
+
+#include <string.h>
+#include "./port.h"
+#include "./streams.h"
+#include "./types.h"
+
+#if defined(__cplusplus) || defined(c_plusplus)
+extern "C" {
+#endif
+
+#define BROTLI_MAX_NUM_BIT_READ   25
+#define BROTLI_READ_SIZE          1024
+#define BROTLI_IMPLICIT_ZEROES    128
+#define BROTLI_IBUF_SIZE          (BROTLI_READ_SIZE + BROTLI_IMPLICIT_ZEROES)
+#define BROTLI_IBUF_MASK          (BROTLI_READ_SIZE - 1)
+
+/* Masking with this expression turns to a single "Unsigned Bit Field Extract"
+   UBFX instruction on ARM. */
+static BROTLI_INLINE uint32_t BitMask(int n) { return ~((0xffffffff) << n); }
+
+typedef struct {
+#if (BROTLI_64_BITS_LITTLE_ENDIAN)
+  uint64_t    val_;          /* pre-fetched bits */
+#else
+  uint32_t    val_;          /* pre-fetched bits */
+#endif
+  uint32_t    bit_pos_;      /* current bit-reading position in val_ */
+  uint8_t*    next_in;       /* the byte we're reading from */
+  uint32_t    avail_in;
+  int         eos_;          /* input stream is finished */
+  BrotliInput input_;        /* input callback */
+
+  /* Input byte buffer, consist of a ringbuffer and a "slack" region where */
+  /* bytes from the start of the ringbuffer are copied. */
+  uint8_t buf_[BROTLI_IBUF_SIZE];
+} BrotliBitReader;
+
+/* Initializes the bitreader fields. After this, BrotliReadInput then
+   BrotliWarmupBitReader must be used. */
+void BrotliInitBitReader(BrotliBitReader* const br, BrotliInput input);
+
+/* Initializes bit reading and bit position with the first input data available.
+   Requires that there is enough input available (BrotliCheckInputAmount). */
+void BrotliWarmupBitReader(BrotliBitReader* const br);
+
+/* Pulls data from the input to the the read buffer.
+
+   Returns 0 if one of:
+    - the input callback returned an error, or
+    - there is no more input and the position is past the end of the stream.
+    - finish is false and less than BROTLI_READ_SIZE are available - a next call
+      when more data is available makes it continue including the partially read
+      data
+
+   If finish is true and the end of the stream is reached,
+   BROTLI_IMPLICIT_ZEROES additional zero bytes are copied to the ringbuffer.
+*/
+static BROTLI_INLINE int BrotliReadInput(
+    BrotliBitReader* const br, int finish) {
+  if (PREDICT_FALSE(br->eos_)) {
+    return 0;
+  } else {
+    size_t i;
+    int bytes_read;
+    if (br->next_in != br->buf_) {
+      for (i = 0; i < br->avail_in; i++) {
+        br->buf_[i] = br->next_in[i];
+      }
+      br->next_in = br->buf_;
+    }
+    bytes_read = BrotliRead(br->input_, br->next_in + br->avail_in,
+        (size_t)(BROTLI_READ_SIZE - br->avail_in));
+    if (bytes_read < 0) {
+      return 0;
+    }
+    br->avail_in += (uint32_t)bytes_read;
+    if (br->avail_in < BROTLI_READ_SIZE) {
+      if (!finish) {
+        return 0;
+      }
+      br->eos_ = 1;
+      /* Store BROTLI_IMPLICIT_ZEROES bytes of zero after the stream end. */
+      memset(br->next_in + br->avail_in, 0, BROTLI_IMPLICIT_ZEROES);
+      br->avail_in += BROTLI_IMPLICIT_ZEROES;
+    }
+    return 1;
+  }
+}
+
+/* Returns amount of unread bytes the bit reader still has buffered from the
+   BrotliInput, including whole bytes in br->val_. */
+static BROTLI_INLINE size_t BrotliGetRemainingBytes(BrotliBitReader* br) {
+  return br->avail_in + sizeof(br->val_) - (br->bit_pos_ >> 3);
+}
+
+/* Checks if there is at least num bytes left in the input ringbuffer (excluding
+   the bits remaining in br->val_). The maximum value for num is
+   BROTLI_IMPLICIT_ZEROES bytes. */
+static BROTLI_INLINE int BrotliCheckInputAmount(
+    BrotliBitReader* const br, size_t num) {
+  return br->avail_in >= num;
+}
+
+/* Guarantees that there are at least n_bits in the buffer.
+   n_bits should be in the range [1..24] */
+static BROTLI_INLINE void BrotliFillBitWindow(
+    BrotliBitReader* const br, int n_bits) {
+#if (BROTLI_64_BITS_LITTLE_ENDIAN)
+  if (IS_CONSTANT(n_bits) && n_bits <= 8) {
+    if (br->bit_pos_ >= 56) {
+      br->val_ >>= 56;
+      br->bit_pos_ ^= 56;  /* here same as -= 56 because of the if condition */
+      br->val_ |= (*(const uint64_t*)(br->next_in)) << 8;
+      br->avail_in -= 7;
+      br->next_in += 7;
+    }
+  } else if (IS_CONSTANT(n_bits) && n_bits <= 16) {
+    if (br->bit_pos_ >= 48) {
+      br->val_ >>= 48;
+      br->bit_pos_ ^= 48;  /* here same as -= 48 because of the if condition */
+      br->val_ |= (*(const uint64_t*)(br->next_in)) << 16;
+      br->avail_in -= 6;
+      br->next_in += 6;
+    }
+  } else {
+    if (br->bit_pos_ >= 32) {
+      br->val_ >>= 32;
+      br->bit_pos_ ^= 32;  /* here same as -= 32 because of the if condition */
+      br->val_ |= ((uint64_t)(*(const uint32_t*)(br->next_in))) << 32;
+      br->avail_in -= 4;
+      br->next_in += 4;
+    }
+  }
+#elif (BROTLI_LITTLE_ENDIAN)
+  if (IS_CONSTANT(n_bits) && n_bits <= 8) {
+    if (br->bit_pos_ >= 24) {
+      br->val_ >>= 24;
+      br->bit_pos_ ^= 24;  /* here same as -= 24 because of the if condition */
+      br->val_ |= (*(const uint32_t*)(br->next_in)) << 8;
+      br->avail_in -= 3;
+      br->next_in += 3;
+    }
+  } else {
+    if (br->bit_pos_ >= 16) {
+      br->val_ >>= 16;
+      br->bit_pos_ ^= 16;  /* here same as -= 16 because of the if condition */
+      br->val_ |= ((uint32_t)(*(const uint16_t*)(br->next_in))) << 16;
+      br->avail_in -= 2;
+      br->next_in += 2;
+    }
+    if (!IS_CONSTANT(n_bits) || (n_bits > 16)) {
+      if (br->bit_pos_ >= 8) {
+        br->val_ >>= 8;
+        br->bit_pos_ ^= 8;  /* here same as -= 8 because of the if condition */
+        br->val_ |= ((uint32_t)*br->next_in) << 24;
+        --br->avail_in;
+        ++br->next_in;
+      }
+    }
+  }
+#else
+  while (br->bit_pos_ >= 8) {
+    br->val_ >>= 8;
+    br->val_ |= ((uint32_t)*br->next_in) << 24;
+    br->bit_pos_ -= 8;
+    --br->avail_in;
+    ++br->next_in;
+  }
+#endif
+}
+
+/* Like BrotliGetBits, but does not mask the result, it is only guaranteed
+that it has minimum n_bits. */
+static BROTLI_INLINE uint32_t BrotliGetBitsUnmasked(
+    BrotliBitReader* const br, int n_bits) {
+  BrotliFillBitWindow(br, n_bits);
+  return (uint32_t)(br->val_ >> br->bit_pos_);
+}
+
+/* Returns the specified number of bits from br without advancing bit pos. */
+static BROTLI_INLINE uint32_t BrotliGetBits(
+    BrotliBitReader* const br, int n_bits) {
+  BrotliFillBitWindow(br, n_bits);
+  return (uint32_t)(br->val_ >> br->bit_pos_) & BitMask(n_bits);
+}
+
+/* Advances the bit pos by n_bits. */
+static BROTLI_INLINE void BrotliDropBits(
+    BrotliBitReader* const br, int n_bits) {
+  br->bit_pos_ += (uint32_t)n_bits;
+}
+
+/* Reads the specified number of bits from br and advances the bit pos. */
+static BROTLI_INLINE uint32_t BrotliReadBits(
+    BrotliBitReader* const br, int n_bits) {
+  uint32_t val;
+  BrotliFillBitWindow(br, n_bits);
+  val = (uint32_t)(br->val_ >> br->bit_pos_) & BitMask(n_bits);
+#ifdef BROTLI_DECODE_DEBUG
+  printf("[BrotliReadBits]  %d %d %d val: %6x\n",
+         (int)br->avail_in, (int)br->bit_pos_, n_bits, val);
+#endif
+  br->bit_pos_ += (uint32_t)n_bits;
+  return val;
+}
+
+/* Advances the bit reader position to the next byte boundary and verifies
+   that any skipped bits are set to zero. */
+static BROTLI_INLINE int BrotliJumpToByteBoundary(BrotliBitReader* br) {
+  uint32_t new_bit_pos = (br->bit_pos_ + 7) & (uint32_t)(~7UL);
+  uint32_t pad_bits = BrotliReadBits(br, (int)(new_bit_pos - br->bit_pos_));
+  return pad_bits == 0;
+}
+
+/* Copies remaining input bytes stored in the bit reader to the output. Value
+   num may not be larger than BrotliGetRemainingBytes. The bit reader must be
+   warmed up again after this. */
+static BROTLI_INLINE void BrotliCopyBytes(uint8_t* dest,
+                                          BrotliBitReader* br, size_t num) {
+  while (br->bit_pos_ + 8 <= (BROTLI_64_BITS_LITTLE_ENDIAN ? 64 : 32)
+      && num > 0) {
+    *dest = (uint8_t)(br->val_ >> br->bit_pos_);
+    br->bit_pos_ += 8;
+    ++dest;
+    --num;
+  }
+  memcpy(dest, br->next_in, num);
+  br->avail_in -= (uint32_t)num;
+  br->next_in += num;
+  br->bit_pos_ = 0;
+}
+
+#if defined(__cplusplus) || defined(c_plusplus)
+}    /* extern "C" */
+#endif
+
+#endif  /* BROTLI_DEC_BIT_READER_H_ */

data/contrib/brotli/dec/context.h

@@ -0,0 +1,260 @@
+/* Copyright 2013 Google Inc. All Rights Reserved.
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+   http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+*/
+
+/* Lookup table to map the previous two bytes to a context id.
+
+   There are four different context modeling modes defined here:
+     CONTEXT_LSB6: context id is the least significant 6 bits of the last byte,
+     CONTEXT_MSB6: context id is the most significant 6 bits of the last byte,
+     CONTEXT_UTF8: second-order context model tuned for UTF8-encoded text,
+     CONTEXT_SIGNED: second-order context model tuned for signed integers.
+
+   The context id for the UTF8 context model is calculated as follows. If p1
+   and p2 are the previous two bytes, we calcualte the context as
+
+     context = kContextLookup[p1] | kContextLookup[p2 + 256].
+
+   If the previous two bytes are ASCII characters (i.e. < 128), this will be
+   equivalent to
+
+     context = 4 * context1(p1) + context2(p2),
+
+   where context1 is based on the previous byte in the following way:
+
+     0  : non-ASCII control
+     1  : \t, \n, \r
+     2  : space
+     3  : other punctuation
+     4  : " '
+     5  : %
+     6  : ( < [ {
+     7  : ) > ] }
+     8  : , ; :
+     9  : .
+     10 : =
+     11 : number
+     12 : upper-case vowel
+     13 : upper-case consonant
+     14 : lower-case vowel
+     15 : lower-case consonant
+
+   and context2 is based on the second last byte:
+
+     0 : control, space
+     1 : punctuation
+     2 : upper-case letter, number
+     3 : lower-case letter
+
+   If the last byte is ASCII, and the second last byte is not (in a valid UTF8
+   stream it will be a continuation byte, value between 128 and 191), the
+   context is the same as if the second last byte was an ASCII control or space.
+
+   If the last byte is a UTF8 lead byte (value >= 192), then the next byte will
+   be a continuation byte and the context id is 2 or 3 depending on the LSB of
+   the last byte and to a lesser extent on the second last byte if it is ASCII.
+
+   If the last byte is a UTF8 continuation byte, the second last byte can be:
+     - continuation byte: the next byte is probably ASCII or lead byte (assuming
+       4-byte UTF8 characters are rare) and the context id is 0 or 1.
+     - lead byte (192 - 207): next byte is ASCII or lead byte, context is 0 or 1
+     - lead byte (208 - 255): next byte is continuation byte, context is 2 or 3
+
+   The possible value combinations of the previous two bytes, the range of
+   context ids and the type of the next byte is summarized in the table below:
+
+   |--------\-----------------------------------------------------------------|
+   |         \                         Last byte                              |
+   | Second   \---------------------------------------------------------------|
+   | last byte \    ASCII            |   cont. byte        |   lead byte      |
+   |            \   (0-127)          |   (128-191)         |   (192-)         |
+   |=============|===================|=====================|==================|
+   |  ASCII      | next: ASCII/lead  |  not valid          |  next: cont.     |
+   |  (0-127)    | context: 4 - 63   |                     |  context: 2 - 3  |
+   |-------------|-------------------|---------------------|------------------|
+   |  cont. byte | next: ASCII/lead  |  next: ASCII/lead   |  next: cont.     |
+   |  (128-191)  | context: 4 - 63   |  context: 0 - 1     |  context: 2 - 3  |
+   |-------------|-------------------|---------------------|------------------|
+   |  lead byte  | not valid         |  next: ASCII/lead   |  not valid       |
+   |  (192-207)  |                   |  context: 0 - 1     |                  |
+   |-------------|-------------------|---------------------|------------------|
+   |  lead byte  | not valid         |  next: cont.        |  not valid       |
+   |  (208-)     |                   |  context: 2 - 3     |                  |
+   |-------------|-------------------|---------------------|------------------|
+
+   The context id for the signed context mode is calculated as:
+
+     context = (kContextLookup[512 + p1] << 3) | kContextLookup[512 + p2].
+
+   For any context modeling modes, the context ids can be calculated by |-ing
+   together two lookups from one table using context model dependent offsets:
+
+     context = kContextLookup[offset1 + p1] | kContextLookup[offset2 + p2].
+
+   where offset1 and offset2 are dependent on the context mode.
+*/
+
+#ifndef BROTLI_DEC_CONTEXT_H_
+#define BROTLI_DEC_CONTEXT_H_
+
+#include "./types.h"
+
+enum ContextType {
+  CONTEXT_LSB6         = 0,
+  CONTEXT_MSB6         = 1,
+  CONTEXT_UTF8         = 2,
+  CONTEXT_SIGNED       = 3
+};
+
+/* Common context lookup table for all context modes. */
+static const uint8_t kContextLookup[1792] = {
+  /* CONTEXT_UTF8, last byte. */
+  /* ASCII range. */
+   0,  0,  0,  0,  0,  0,  0,  0,  0,  4,  4,  0,  0,  4,  0,  0,
+   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+   8, 12, 16, 12, 12, 20, 12, 16, 24, 28, 12, 12, 32, 12, 36, 12,
+  44, 44, 44, 44, 44, 44, 44, 44, 44, 44, 32, 32, 24, 40, 28, 12,
+  12, 48, 52, 52, 52, 48, 52, 52, 52, 48, 52, 52, 52, 52, 52, 48,
+  52, 52, 52, 52, 52, 48, 52, 52, 52, 52, 52, 24, 12, 28, 12, 12,
+  12, 56, 60, 60, 60, 56, 60, 60, 60, 56, 60, 60, 60, 60, 60, 56,
+  60, 60, 60, 60, 60, 56, 60, 60, 60, 60, 60, 24, 12, 28, 12,  0,
+  /* UTF8 continuation byte range. */
+  0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
+  0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
+  0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
+  0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
+  /* UTF8 lead byte range. */
+  2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
+  2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
+  2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
+  2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
+  /* CONTEXT_UTF8 second last byte. */
+  /* ASCII range. */
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 1, 1, 1, 1, 1,
+  1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 1, 1, 1, 1,
+  1, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+  3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, 0,
+  /* UTF8 continuation byte range. */
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  /* UTF8 lead byte range. */
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+  /* CONTEXT_SIGNED, second last byte. */
+  0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+  3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+  3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+  3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+  3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+  4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+  4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+  4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+  4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+  5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+  5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+  5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+  6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 7,
+  /* CONTEXT_SIGNED, last byte, same as the above values shifted by 3 bits. */
+   0, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+  16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16,
+  16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16,
+  16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16,
+  24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+  24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+  24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+  24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+  32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,
+  32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,
+  32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,
+  32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32, 32,
+  40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
+  40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
+  40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
+  48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 56,
+  /* CONTEXT_LSB6, last byte. */
+   0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+  32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+  48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+   0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+  32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+  48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+   0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+  32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+  48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+   0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+  32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+  48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+  /* CONTEXT_MSB6, last byte. */
+   0,  0,  0,  0,  1,  1,  1,  1,  2,  2,  2,  2,  3,  3,  3,  3,
+   4,  4,  4,  4,  5,  5,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,
+   8,  8,  8,  8,  9,  9,  9,  9, 10, 10, 10, 10, 11, 11, 11, 11,
+  12, 12, 12, 12, 13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15,
+  16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, 19, 19, 19, 19,
+  20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 23, 23, 23, 23,
+  24, 24, 24, 24, 25, 25, 25, 25, 26, 26, 26, 26, 27, 27, 27, 27,
+  28, 28, 28, 28, 29, 29, 29, 29, 30, 30, 30, 30, 31, 31, 31, 31,
+  32, 32, 32, 32, 33, 33, 33, 33, 34, 34, 34, 34, 35, 35, 35, 35,
+  36, 36, 36, 36, 37, 37, 37, 37, 38, 38, 38, 38, 39, 39, 39, 39,
+  40, 40, 40, 40, 41, 41, 41, 41, 42, 42, 42, 42, 43, 43, 43, 43,
+  44, 44, 44, 44, 45, 45, 45, 45, 46, 46, 46, 46, 47, 47, 47, 47,
+  48, 48, 48, 48, 49, 49, 49, 49, 50, 50, 50, 50, 51, 51, 51, 51,
+  52, 52, 52, 52, 53, 53, 53, 53, 54, 54, 54, 54, 55, 55, 55, 55,
+  56, 56, 56, 56, 57, 57, 57, 57, 58, 58, 58, 58, 59, 59, 59, 59,
+  60, 60, 60, 60, 61, 61, 61, 61, 62, 62, 62, 62, 63, 63, 63, 63,
+  /* CONTEXT_{M,L}SB6, second last byte, */
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+};
+
+static const int kContextLookupOffsets[8] = {
+  /* CONTEXT_LSB6 */
+  1024, 1536,
+  /* CONTEXT_MSB6 */
+  1280, 1536,
+  /* CONTEXT_UTF8 */
+  0, 256,
+  /* CONTEXT_SIGNED */
+  768, 512,
+};
+
+#endif  /* BROTLI_DEC_CONTEXT_H_ */