expressir 0.2.7-x86-linux

data/.rubocop.yml

@@ -0,0 +1,508 @@
+---
+AllCops:
+  Exclude:
+  - vendor/**/*
+  - db/**/*
+  - tmp/**/*
+  DisplayCopNames: false
+  StyleGuideCopsOnly: false
+  TargetRubyVersion: 2.4
+Naming/AccessorMethodName:
+  Description: Check the naming of accessor methods for get_/set_.
+  Enabled: false
+Style/Alias:
+  Description: Use alias_method instead of alias.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#alias-method
+  Enabled: false
+Style/ArrayJoin:
+  Description: Use Array#join instead of Array#*.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#array-join
+  Enabled: false
+Style/AsciiComments:
+  Description: Use only ascii symbols in comments.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#english-comments
+  Enabled: false
+Naming/AsciiIdentifiers:
+  Description: Use only ascii symbols in identifiers.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#english-identifiers
+  Enabled: false
+Style/Attr:
+  Description: Checks for uses of Module#attr.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#attr
+  Enabled: false
+Metrics/BlockNesting:
+  Description: Avoid excessive block nesting
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#three-is-the-number-thou-shalt-count
+  Enabled: true
+  Max: 3
+Style/CaseEquality:
+  Description: Avoid explicit use of the case equality operator(===).
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-case-equality
+  Enabled: false
+Style/CharacterLiteral:
+  Description: Checks for uses of character literals.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-character-literals
+  Enabled: false
+Style/ClassAndModuleChildren:
+  Description: Checks style of children classes and modules.
+  Enabled: true
+  EnforcedStyle: nested
+Metrics/ClassLength:
+  Description: Avoid classes longer than 100 lines of code.
+  Enabled: false
+  CountComments: false
+  Max: 100
+Metrics/ModuleLength:
+  Description: Avoid modules longer than 100 lines of code.
+  Enabled: false
+Style/ClassVars:
+  Description: Avoid the use of class variables.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-class-vars
+  Enabled: false
+Style/CollectionMethods:
+  Enabled: true
+  PreferredMethods:
+    find: detect
+    inject: reduce
+    collect: map
+    find_all: select
+Style/ColonMethodCall:
+  Description: 'Do not use :: for method call.'
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#double-colons
+  Enabled: false
+Style/CommentAnnotation:
+  Description: Checks formatting of special comments (TODO, FIXME, OPTIMIZE, HACK,
+    REVIEW).
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#annotate-keywords
+  Enabled: false
+Metrics/AbcSize:
+  Description: A calculated magnitude based on number of assignments, branches, and
+    conditions.
+  Enabled: true
+  Max: 15
+Metrics/BlockLength:
+  CountComments: true
+  Max: 25
+  ExcludedMethods: []
+  Exclude:
+  - spec/**/*
+Metrics/CyclomaticComplexity:
+  Description: A complexity metric that is strongly correlated to the number of test
+    cases needed to validate a method.
+  Enabled: true
+  Max: 6
+Rails/Delegate:
+  Description: Prefer delegate method for delegations.
+  Enabled: false
+Style/PreferredHashMethods:
+  Description: Checks use of `has_key?` and `has_value?` Hash methods.
+  StyleGuide: "#hash-key"
+  Enabled: false
+Style/Documentation:
+  Description: Document classes and non-namespace modules.
+  Enabled: false
+Style/DoubleNegation:
+  Description: Checks for uses of double negation (!!).
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-bang-bang
+  Enabled: false
+Style/EachWithObject:
+  Description: Prefer `each_with_object` over `inject` or `reduce`.
+  Enabled: false
+Style/EmptyLiteral:
+  Description: Prefer literals to Array.new/Hash.new/String.new.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#literal-array-hash
+  Enabled: false
+Style/Encoding:
+  Enabled: false
+Style/EvenOdd:
+  Description: Favor the use of Fixnum#even? && Fixnum#odd?
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#predicate-methods
+  Enabled: false
+Naming/FileName:
+  Description: Use snake_case for source file names.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#snake-case-files
+  Enabled: false
+Style/FrozenStringLiteralComment:
+  Description: Add the frozen_string_literal comment to the top of files to help transition
+    from Ruby 2.3.0 to Ruby 3.0.
+  Enabled: false
+Style/FlipFlop:
+  Description: Checks for flip flops
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-flip-flops
+  Enabled: false
+Style/FormatString:
+  Description: Enforce the use of Kernel#sprintf, Kernel#format or String#%.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#sprintf
+  Enabled: false
+Style/GlobalVars:
+  Description: Do not introduce global variables.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#instance-vars
+  Reference: http://www.zenspider.com/Languages/Ruby/QuickRef.html
+  Enabled: false
+Style/GuardClause:
+  Description: Check for conditionals that can be replaced with guard clauses
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-nested-conditionals
+  Enabled: false
+Style/IfUnlessModifier:
+  Description: Favor modifier if/unless usage when you have a single-line body.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#if-as-a-modifier
+  Enabled: false
+Style/IfWithSemicolon:
+  Description: Do not use if x; .... Use the ternary operator instead.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-semicolon-ifs
+  Enabled: false
+Style/InlineComment:
+  Description: Avoid inline comments.
+  Enabled: false
+Style/Lambda:
+  Description: Use the new lambda literal syntax for single-line blocks.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#lambda-multi-line
+  Enabled: false
+Style/LambdaCall:
+  Description: Use lambda.call(...) instead of lambda.(...).
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#proc-call
+  Enabled: false
+Style/LineEndConcatenation:
+  Description: Use \ instead of + or << to concatenate two string literals at line
+    end.
+  Enabled: false
+Metrics/LineLength:
+  Description: Limit lines to 80 characters.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#80-character-limits
+  Max: 80
+  Enabled: true
+  AllowURI: true
+  URISchemes:
+  - http
+  - https
+Metrics/MethodLength:
+  Description: Avoid methods longer than 10 lines of code.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#short-methods
+  Enabled: true
+  CountComments: true
+  Max: 10
+  Exclude:
+  - spec/**/*
+Style/ModuleFunction:
+  Description: Checks for usage of `extend self` in modules.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#module-function
+  Enabled: false
+Style/MultilineBlockChain:
+  Description: Avoid multi-line chains of blocks.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#single-line-blocks
+  Enabled: false
+Style/NegatedIf:
+  Description: Favor unless over if for negative conditions (or control flow or).
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#unless-for-negatives
+  Enabled: false
+Style/NegatedWhile:
+  Description: Favor until over while for negative conditions.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#until-for-negatives
+  Enabled: false
+Style/Next:
+  Description: Use `next` to skip iteration instead of a condition at the end.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-nested-conditionals
+  Enabled: false
+Style/NilComparison:
+  Description: Prefer x.nil? to x == nil.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#predicate-methods
+  Enabled: false
+Style/Not:
+  Description: Use ! instead of not.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#bang-not-not
+  Enabled: false
+Style/NumericLiterals:
+  Description: Add underscores to large numeric literals to improve their readability.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#underscores-in-numerics
+  Enabled: false
+Style/OneLineConditional:
+  Description: Favor the ternary operator(?:) over if/then/else/end constructs.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#ternary-operator
+  Enabled: false
+Naming/BinaryOperatorParameterName:
+  Description: When defining binary operators, name the argument other.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#other-arg
+  Enabled: false
+Metrics/ParameterLists:
+  Description: Avoid long parameter lists.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#too-many-params
+  Enabled: true
+  Max: 5
+  CountKeywordArgs: true
+Style/PercentLiteralDelimiters:
+  Description: Use `%`-literal delimiters consistently
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#percent-literal-braces
+  Enabled: false
+Style/PerlBackrefs:
+  Description: Avoid Perl-style regex back references.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-perl-regexp-last-matchers
+  Enabled: false
+Naming/PredicateName:
+  Description: Check the names of predicate methods.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#bool-methods-qmark
+  NamePrefixBlacklist:
+  - is_
+  Exclude:
+  - spec/**/*
+Style/Proc:
+  Description: Use proc instead of Proc.new.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#proc
+  Enabled: false
+Style/RaiseArgs:
+  Description: Checks the arguments passed to raise/fail.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#exception-class-messages
+  Enabled: false
+Style/RegexpLiteral:
+  Description: Use / or %r around regular expressions.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#percent-r
+  Enabled: false
+Style/SelfAssignment:
+  Description: Checks for places where self-assignment shorthand should have been
+    used.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#self-assignment
+  Enabled: false
+Style/SingleLineBlockParams:
+  Description: Enforces the names of some block params.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#reduce-blocks
+  Enabled: false
+Style/SingleLineMethods:
+  Description: Avoid single-line methods.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-single-line-methods
+  Enabled: false
+Style/SignalException:
+  Description: Checks for proper usage of fail and raise.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#fail-method
+  Enabled: false
+Style/SpecialGlobalVars:
+  Description: Avoid Perl-style global variables.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-cryptic-perlisms
+  Enabled: false
+Style/StringLiterals:
+  Description: Checks if uses of quotes match the configured preference.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#consistent-string-literals
+  EnforcedStyle: double_quotes
+  Enabled: true
+Style/TrailingCommaInArguments:
+  Description: Checks for trailing comma in argument lists.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-trailing-array-commas
+  EnforcedStyleForMultiline: comma
+  SupportedStylesForMultiline:
+  - comma
+  - consistent_comma
+  - no_comma
+  Enabled: true
+Style/TrailingCommaInArrayLiteral:
+  Description: Checks for trailing comma in array literals.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-trailing-array-commas
+  EnforcedStyleForMultiline: comma
+  SupportedStylesForMultiline:
+  - comma
+  - consistent_comma
+  - no_comma
+  Enabled: true
+Style/TrailingCommaInHashLiteral:
+  Description: Checks for trailing comma in hash literals.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-trailing-array-commas
+  EnforcedStyleForMultiline: comma
+  SupportedStylesForMultiline:
+  - comma
+  - consistent_comma
+  - no_comma
+  Enabled: true
+Style/TrivialAccessors:
+  Description: Prefer attr_* methods to trivial readers/writers.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#attr_family
+  Enabled: false
+Style/VariableInterpolation:
+  Description: Don't interpolate global, instance and class variables directly in
+    strings.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#curlies-interpolate
+  Enabled: false
+Style/WhenThen:
+  Description: Use when x then ... for one-line cases.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#one-line-cases
+  Enabled: false
+Style/WhileUntilModifier:
+  Description: Favor modifier while/until usage when you have a single-line body.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#while-as-a-modifier
+  Enabled: false
+Style/WordArray:
+  Description: Use %w or %W for arrays of words.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#percent-w
+  Enabled: false
+Layout/AlignParameters:
+  Description: Here we check if the parameters on a multi-line method call or definition
+    are aligned.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-double-indent
+  Enabled: false
+Layout/ConditionPosition:
+  Description: Checks for condition placed in a confusing position relative to the
+    keyword.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#same-line-condition
+  Enabled: false
+Layout/DotPosition:
+  Description: Checks the position of the dot in multi-line method calls.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#consistent-multi-line-chains
+  EnforcedStyle: trailing
+Layout/ExtraSpacing:
+  Description: Do not use unnecessary spacing.
+  Enabled: true
+Layout/MultilineOperationIndentation:
+  Description: Checks indentation of binary operations that span more than one line.
+  Enabled: true
+  EnforcedStyle: indented
+Layout/MultilineMethodCallIndentation:
+  Description: Checks indentation of method calls with the dot operator that span
+    more than one line.
+  Enabled: true
+  EnforcedStyle: indented
+Layout/InitialIndentation:
+  Description: Checks the indentation of the first non-blank non-comment line in a
+    file.
+  Enabled: false
+Lint/AmbiguousOperator:
+  Description: Checks for ambiguous operators in the first argument of a method invocation
+    without parentheses.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#parens-as-args
+  Enabled: false
+Lint/AmbiguousRegexpLiteral:
+  Description: Checks for ambiguous regexp literals in the first argument of a method
+    invocation without parenthesis.
+  Enabled: false
+Lint/AssignmentInCondition:
+  Description: Don't use assignment in conditions.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#safe-assignment-in-condition
+  Enabled: false
+Lint/CircularArgumentReference:
+  Description: Don't refer to the keyword argument in the default value.
+  Enabled: false
+Lint/DeprecatedClassMethods:
+  Description: Check for deprecated class method calls.
+  Enabled: false
+Lint/DuplicatedKey:
+  Description: Check for duplicate keys in hash literals.
+  Enabled: false
+Lint/EachWithObjectArgument:
+  Description: Check for immutable argument given to each_with_object.
+  Enabled: false
+Lint/ElseLayout:
+  Description: Check for odd code arrangement in an else block.
+  Enabled: false
+Lint/FormatParameterMismatch:
+  Description: The number of parameters to format/sprint must match the fields.
+  Enabled: false
+Lint/HandleExceptions:
+  Description: Don't suppress exception.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#dont-hide-exceptions
+  Enabled: false
+Lint/LiteralAsCondition:
+  Description: Checks of literals used in conditions.
+  Enabled: false
+Lint/LiteralInInterpolation:
+  Description: Checks for literals used in interpolation.
+  Enabled: false
+Lint/Loop:
+  Description: Use Kernel#loop with break rather than begin/end/until or begin/end/while
+    for post-loop tests.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#loop-with-break
+  Enabled: false
+Lint/NestedMethodDefinition:
+  Description: Do not use nested method definitions.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#no-nested-methods
+  Enabled: false
+Lint/NonLocalExitFromIterator:
+  Description: Do not use return in iterator to cause non-local exit.
+  Enabled: false
+Lint/ParenthesesAsGroupedExpression:
+  Description: Checks for method calls with a space before the opening parenthesis.
+  StyleGuide: https://github.com/bbatsov/ruby-style-guide#parens-no-spaces
+  Enabled: false
+Lint/RequireParentheses:
+  Description: Use parentheses in the method call to avoid confusion about precedence.
+  Enabled: false
+Lint/UnderscorePrefixedVariableName:
+  Description: Do not use prefix `_` for a variable that is used.
+  Enabled: false
+Lint/UnneededCopDisableDirective:
+  Description: 'Checks for rubocop:disable comments that can be removed. Note: this
+    cop is not disabled when disabling all cops. It must be explicitly disabled.'
+  Enabled: false
+Lint/Void:
+  Description: Possible use of operator/literal/variable in void context.
+  Enabled: false
+Performance/CaseWhenSplat:
+  Description: Place `when` conditions that use splat at the end of the list of `when`
+    branches.
+  Enabled: false
+Performance/Count:
+  Description: Use `count` instead of `select...size`, `reject...size`, `select...count`,
+    `reject...count`, `select...length`, and `reject...length`.
+  Enabled: false
+Performance/Detect:
+  Description: Use `detect` instead of `select.first`, `find_all.first`, `select.last`,
+    and `find_all.last`.
+  Reference: https://github.com/JuanitoFatas/fast-ruby#enumerabledetect-vs-enumerableselectfirst-code
+  Enabled: false
+Performance/FlatMap:
+  Description: Use `Enumerable#flat_map` instead of `Enumerable#map...Array#flatten(1)`
+    or `Enumberable#collect..Array#flatten(1)`
+  Reference: https://github.com/JuanitoFatas/fast-ruby#enumerablemaparrayflatten-vs-enumerableflat_map-code
+  Enabled: false
+Performance/ReverseEach:
+  Description: Use `reverse_each` instead of `reverse.each`.
+  Reference: https://github.com/JuanitoFatas/fast-ruby#enumerablereverseeach-vs-enumerablereverse_each-code
+  Enabled: false
+Performance/Sample:
+  Description: Use `sample` instead of `shuffle.first`, `shuffle.last`, and `shuffle[Fixnum]`.
+  Reference: https://github.com/JuanitoFatas/fast-ruby#arrayshufflefirst-vs-arraysample-code
+  Enabled: false
+Performance/Size:
+  Description: Use `size` instead of `count` for counting the number of elements in
+    `Array` and `Hash`.
+  Reference: https://github.com/JuanitoFatas/fast-ruby#arraycount-vs-arraysize-code
+  Enabled: false
+Performance/StringReplacement:
+  Description: Use `tr` instead of `gsub` when you are replacing the same number of
+    characters. Use `delete` instead of `gsub` when you are deleting characters.
+  Reference: https://github.com/JuanitoFatas/fast-ruby#stringgsub-vs-stringtr-code
+  Enabled: false
+Rails/ActionFilter:
+  Description: Enforces consistent use of action filter methods.
+  Enabled: false
+Rails/Date:
+  Description: Checks the correct usage of date aware methods, such as Date.today,
+    Date.current etc.
+  Enabled: false
+Rails/FindBy:
+  Description: Prefer find_by over where.first.
+  Enabled: false
+Rails/FindEach:
+  Description: Prefer all.find_each over all.find.
+  Enabled: false
+Rails/HasAndBelongsToMany:
+  Description: Prefer has_many :through to has_and_belongs_to_many.
+  Enabled: false
+Rails/Output:
+  Description: Checks for calls to puts, print, etc.
+  Enabled: false
+Rails/ReadWriteAttribute:
+  Description: Checks for read_attribute(:attr) and write_attribute(:attr, val).
+  Enabled: false
+Rails/ScopeArgs:
+  Description: Checks the arguments of ActiveRecord scopes.
+  Enabled: false
+Rails/TimeZone:
+  Description: Checks the correct usage of time zone aware methods.
+  StyleGuide: https://github.com/bbatsov/rails-style-guide#time
+  Reference: http://danilenko.org/2012/7/6/rails_timezones
+  Enabled: false
+Rails/Validation:
+  Description: Use validates :attribute, hash of validations.
+  Enabled: false
+Rails:
+  Enabled: true
+Metrics/PerceivedComplexity:
+  Description: A complexity metric geared towards measuring complexity for a human
+    reader.
+  Enabled: true
+  Max: 7

data/Gemfile

@@ -0,0 +1,4 @@
+source "https://rubygems.org"
+
+# Specify your gem's dependencies in reeper.gemspec
+gemspec

data/README.adoc

@@ -0,0 +1,147 @@
+= Expressir: EXPRESS in Ruby
+
+image:https://github.com/lutaml/expressir/workflows/ubuntu/badge.svg[ubuntu]
+image:https://github.com/lutaml/expressir/workflows/macos/badge.svg[macos]
+image:https://github.com/lutaml/expressir/workflows/windows/badge.svg[windows]
+
+== Purpose
+
+Expressir ("`EXPRESS in Ruby`") is a Ruby parser for EXPRESS and
+a set of Ruby tools for accessing ISO EXPRESS data models.
+
+== Architecture
+
+Expressir consists of 3 parts:
+
+. Parsers. A parser allows Expressir to read EXPRESS files, including:
+
+** EXPRESS data modelling language (ISO 10303-11:2007)
+** EXPRESS data modelling language in XML (STEPmod)
+** EXPRESS XML (ISO 10303-28:2007)
+"`Industrial automation systems and integration — Product data representation and exchange — Part 28: Implementation methods: XML representations of EXPRESS schemas and data, using XML schemas`")
+
+. Data model. The data model (`lib/expressir/express`) is the Ruby data model that fully represents an EXPRESS data model.
+
+. Converters. A converter transforms the EXPRESS Ruby data model into an interoperable export format, including:
+** EXPRESS data modelling language (ISO 10303-11:2007)
+** W3C OWL
+** OMG SysML (XMI 2.1, XMI 2.5)
+** OMG UML 2 (XMI 2.1)
+** OMG UML 2 for Eclipse (XMI 2.1)
+
+
+== Usage
+
+This gem ships with a CLI tool. To check what's available you can simply run
+the script directly from `exe/expressir`, by default it will display some usage
+instructions.
+
+[source, sh]
+----
+./exe/expressir
+
+Commands:
+  expressir help [COMMAND]  # Describe available commands or one specific command
+  expressir version         # The Expressir Version
+----
+
+== Development
+
+We are following Sandi Metz's Rules for this gem, you can read
+the http://robots.thoughtbot.com/post/50655960596/sandi-metz-rules-for-developers[description of the rules here] All new code should follow these rules.
+If you make changes in a pre-existing file that violates these rules you should
+fix the violations as part of your contribution.
+
+=== Setup
+
+Clone the repository.
+
+[source, sh]
+----
+git clone https://github.com/metanorma/expressir
+----
+
+Setup your environment.
+
+[source, sh]
+----
+bin/setup
+----
+
+Run the test suite
+
+[source, sh]
+----
+bin/rspec
+----
+
+== Installation
+
+Add this line to your application's `Gemfile`:
+
+[source, sh]
+----
+gem "expressir"
+----
+
+And then execute:
+
+[source, sh]
+----
+$ bundle install
+----
+
+Or install it yourself as:
+
+[source, sh]
+----
+$ gem install expressir
+----
+
+
+== Contributing
+
+First, thank you for contributing! We love pull requests from everyone. By
+participating in this project, you hereby grant
+https://www.ribose.com[Ribose Inc.] the right to grant or transfer an unlimited
+number of non exclusive licenses or sub-licenses to third parties, under the
+copyright covering the contribution to use the contribution by all means.
+
+Here are a few technical guidelines to follow:
+
+* Open an https://github.com/lutaml/expressir/issues[issues] to discuss a new
+  feature.
+* Write tests to support your new feature.
+* Make sure the entire test suite passes locally and on CI.
+* Open a Pull Request.
+* https://github.com/thoughtbot/guides/tree/master/protocol/git#write-a-feature[Squash your commits] after receiving feedback.
+* Party!
+
+
+== License
+
+Expressir is distributed under the BSD 2-clause license.
+
+Expressir is built on code originally from the NIST Reeper project.
+
+The https://www.nist.gov/services-resources/software/reeper[NIST Reeper license]
+is reproduced below:
+
+[quote]
+____
+This software was funded by NIST and developed by EuroSTEP.
+Pursuant to title 17 Section 105 of the United States Code this
+software is not subject to copyright protection and is in the public
+domain.
+
+We would appreciate acknowledgment if the software is used. Links to
+non-Federal Government Web sites do not imply NIST endorsement of any
+particular product, service, organization, company, information
+provider, or content.
+____
+
+
+== Credits
+
+Expressir is created using the structure and examples provided by
+the NIST Reeper software on https://sourceforge.net/p/reeper/[Sourceforge].

data/Rakefile

@@ -0,0 +1,11 @@
+require "bundler/gem_tasks"
+require "rspec/core/rake_task"
+require "rake/extensiontask"
+
+RSpec::Core::RakeTask.new(:spec)
+
+task :default => :spec
+
+GEMSPEC = Gem::Specification.load("expressir.gemspec")
+
+Gem::PackageTask.new(GEMSPEC).define

data/bin/console

@@ -0,0 +1,12 @@
+#!/usr/bin/env ruby
+
+require "bundler/setup"
+require "reeper"
+
+# You can add fixtures and/or initialization code here to make experimenting
+# with your gem easier. You can also use a different console, if you like.
+
+# (If you use this, don't forget to add pry to your Gemfile!)
+require "pry"
+Pry.start
+