expressir 0.2.4-x64-mingw32 → 0.2.10-x64-mingw32

data/ext/express-parser/antlr4-upstream/runtime/Cpp/runtime/src/atn/PredictionMode.h

@@ -1,436 +0,0 @@
-/* Copyright (c) 2012-2017 The ANTLR Project. All rights reserved.
- * Use of this file is governed by the BSD 3-clause license that
- * can be found in the LICENSE.txt file in the project root.
- */
-
-#pragma once
-
-#include "support/BitSet.h"
-
-namespace antlr4 {
-namespace atn {
-
-  /**
-   * This enumeration defines the prediction modes available in ANTLR 4 along with
-   * utility methods for analyzing configuration sets for conflicts and/or
-   * ambiguities.
-   */
-  enum class PredictionMode {
-    /**
-     * The SLL(*) prediction mode. This prediction mode ignores the current
-     * parser context when making predictions. This is the fastest prediction
-     * mode, and provides correct results for many grammars. This prediction
-     * mode is more powerful than the prediction mode provided by ANTLR 3, but
-     * may result in syntax errors for grammar and input combinations which are
-     * not SLL.
-     *
-     * <p>
-     * When using this prediction mode, the parser will either return a correct
-     * parse tree (i.e. the same parse tree that would be returned with the
-     * {@link #LL} prediction mode), or it will report a syntax error. If a
-     * syntax error is encountered when using the {@link #SLL} prediction mode,
-     * it may be due to either an actual syntax error in the input or indicate
-     * that the particular combination of grammar and input requires the more
-     * powerful {@link #LL} prediction abilities to complete successfully.</p>
-     *
-     * <p>
-     * This prediction mode does not provide any guarantees for prediction
-     * behavior for syntactically-incorrect inputs.</p>
-     */
-    SLL,
-
-    /**
-     * The LL(*) prediction mode. This prediction mode allows the current parser
-     * context to be used for resolving SLL conflicts that occur during
-     * prediction. This is the fastest prediction mode that guarantees correct
-     * parse results for all combinations of grammars with syntactically correct
-     * inputs.
-     *
-     * <p>
-     * When using this prediction mode, the parser will make correct decisions
-     * for all syntactically-correct grammar and input combinations. However, in
-     * cases where the grammar is truly ambiguous this prediction mode might not
-     * report a precise answer for <em>exactly which</em> alternatives are
-     * ambiguous.</p>
-     *
-     * <p>
-     * This prediction mode does not provide any guarantees for prediction
-     * behavior for syntactically-incorrect inputs.</p>
-     */
-    LL,
-
-    /**
-     * The LL(*) prediction mode with exact ambiguity detection. In addition to
-     * the correctness guarantees provided by the {@link #LL} prediction mode,
-     * this prediction mode instructs the prediction algorithm to determine the
-     * complete and exact set of ambiguous alternatives for every ambiguous
-     * decision encountered while parsing.
-     *
-     * <p>
-     * This prediction mode may be used for diagnosing ambiguities during
-     * grammar development. Due to the performance overhead of calculating sets
-     * of ambiguous alternatives, this prediction mode should be avoided when
-     * the exact results are not necessary.</p>
-     *
-     * <p>
-     * This prediction mode does not provide any guarantees for prediction
-     * behavior for syntactically-incorrect inputs.</p>
-     */
-    LL_EXACT_AMBIG_DETECTION
-  };
-
-  class ANTLR4CPP_PUBLIC PredictionModeClass {
-  public:
-    /**
-     * Computes the SLL prediction termination condition.
-     *
-     * <p>
-     * This method computes the SLL prediction termination condition for both of
-     * the following cases.</p>
-     *
-     * <ul>
-     * <li>The usual SLL+LL fallback upon SLL conflict</li>
-     * <li>Pure SLL without LL fallback</li>
-     * </ul>
-     *
-     * <p><strong>COMBINED SLL+LL PARSING</strong></p>
-     *
-     * <p>When LL-fallback is enabled upon SLL conflict, correct predictions are
-     * ensured regardless of how the termination condition is computed by this
-     * method. Due to the substantially higher cost of LL prediction, the
-     * prediction should only fall back to LL when the additional lookahead
-     * cannot lead to a unique SLL prediction.</p>
-     *
-     * <p>Assuming combined SLL+LL parsing, an SLL configuration set with only
-     * conflicting subsets should fall back to full LL, even if the
-     * configuration sets don't resolve to the same alternative (e.g.
-     * {@code {1,2}} and {@code {3,4}}. If there is at least one non-conflicting
-     * configuration, SLL could continue with the hopes that more lookahead will
-     * resolve via one of those non-conflicting configurations.</p>
-     *
-     * <p>Here's the prediction termination rule them: SLL (for SLL+LL parsing)
-     * stops when it sees only conflicting configuration subsets. In contrast,
-     * full LL keeps going when there is uncertainty.</p>
-     *
-     * <p><strong>HEURISTIC</strong></p>
-     *
-     * <p>As a heuristic, we stop prediction when we see any conflicting subset
-     * unless we see a state that only has one alternative associated with it.
-     * The single-alt-state thing lets prediction continue upon rules like
-     * (otherwise, it would admit defeat too soon):</p>
-     *
-     * <p>{@code [12|1|[], 6|2|[], 12|2|[]]. s : (ID | ID ID?) ';' ;}</p>
-     *
-     * <p>When the ATN simulation reaches the state before {@code ';'}, it has a
-     * DFA state that looks like: {@code [12|1|[], 6|2|[], 12|2|[]]}. Naturally
-     * {@code 12|1|[]} and {@code 12|2|[]} conflict, but we cannot stop
-     * processing this node because alternative to has another way to continue,
-     * via {@code [6|2|[]]}.</p>
-     *
-     * <p>It also let's us continue for this rule:</p>
-     *
-     * <p>{@code [1|1|[], 1|2|[], 8|3|[]] a : A | A | A B ;}</p>
-     *
-     * <p>After matching input A, we reach the stop state for rule A, state 1.
-     * State 8 is the state right before B. Clearly alternatives 1 and 2
-     * conflict and no amount of further lookahead will separate the two.
-     * However, alternative 3 will be able to continue and so we do not stop
-     * working on this state. In the previous example, we're concerned with
-     * states associated with the conflicting alternatives. Here alt 3 is not
-     * associated with the conflicting configs, but since we can continue
-     * looking for input reasonably, don't declare the state done.</p>
-     *
-     * <p><strong>PURE SLL PARSING</strong></p>
-     *
-     * <p>To handle pure SLL parsing, all we have to do is make sure that we
-     * combine stack contexts for configurations that differ only by semantic
-     * predicate. From there, we can do the usual SLL termination heuristic.</p>
-     *
-     * <p><strong>PREDICATES IN SLL+LL PARSING</strong></p>
-     *
-     * <p>SLL decisions don't evaluate predicates until after they reach DFA stop
-     * states because they need to create the DFA cache that works in all
-     * semantic situations. In contrast, full LL evaluates predicates collected
-     * during start state computation so it can ignore predicates thereafter.
-     * This means that SLL termination detection can totally ignore semantic
-     * predicates.</p>
-     *
-     * <p>Implementation-wise, {@link ATNConfigSet} combines stack contexts but not
-     * semantic predicate contexts so we might see two configurations like the
-     * following.</p>
-     *
-     * <p>{@code (s, 1, x, {}), (s, 1, x', {p})}</p>
-     *
-     * <p>Before testing these configurations against others, we have to merge
-     * {@code x} and {@code x'} (without modifying the existing configurations).
-     * For example, we test {@code (x+x')==x''} when looking for conflicts in
-     * the following configurations.</p>
-     *
-     * <p>{@code (s, 1, x, {}), (s, 1, x', {p}), (s, 2, x'', {})}</p>
-     *
-     * <p>If the configuration set has predicates (as indicated by
-     * {@link ATNConfigSet#hasSemanticContext}), this algorithm makes a copy of
-     * the configurations to strip out all of the predicates so that a standard
-     * {@link ATNConfigSet} will merge everything ignoring predicates.</p>
-     */
-    static bool hasSLLConflictTerminatingPrediction(PredictionMode mode, ATNConfigSet *configs);
-
-    /// <summary>
-    /// Checks if any configuration in {@code configs} is in a
-    /// <seealso cref="RuleStopState"/>. Configurations meeting this condition have
-    /// reached
-    /// the end of the decision rule (local context) or end of start rule (full
-    /// context).
-    /// </summary>
-    /// <param name="configs"> the configuration set to test </param>
-    /// <returns> {@code true} if any configuration in {@code configs} is in a
-    /// <seealso cref="RuleStopState"/>, otherwise {@code false} </returns>
-    static bool hasConfigInRuleStopState(ATNConfigSet *configs);
-
-    /// <summary>
-    /// Checks if all configurations in {@code configs} are in a
-    /// <seealso cref="RuleStopState"/>. Configurations meeting this condition have
-    /// reached
-    /// the end of the decision rule (local context) or end of start rule (full
-    /// context).
-    /// </summary>
-    /// <param name="configs"> the configuration set to test </param>
-    /// <returns> {@code true} if all configurations in {@code configs} are in a
-    /// <seealso cref="RuleStopState"/>, otherwise {@code false} </returns>
-    static bool allConfigsInRuleStopStates(ATNConfigSet *configs);
-
-    /**
-     * Full LL prediction termination.
-     *
-     * <p>Can we stop looking ahead during ATN simulation or is there some
-     * uncertainty as to which alternative we will ultimately pick, after
-     * consuming more input? Even if there are partial conflicts, we might know
-     * that everything is going to resolve to the same minimum alternative. That
-     * means we can stop since no more lookahead will change that fact. On the
-     * other hand, there might be multiple conflicts that resolve to different
-     * minimums. That means we need more look ahead to decide which of those
-     * alternatives we should predict.</p>
-     *
-     * <p>The basic idea is to split the set of configurations {@code C}, into
-     * conflicting subsets {@code (s, _, ctx, _)} and singleton subsets with
-     * non-conflicting configurations. Two configurations conflict if they have
-     * identical {@link ATNConfig#state} and {@link ATNConfig#context} values
-     * but different {@link ATNConfig#alt} value, e.g. {@code (s, i, ctx, _)}
-     * and {@code (s, j, ctx, _)} for {@code i!=j}.</p>
-     *
-     * <p>Reduce these configuration subsets to the set of possible alternatives.
-     * You can compute the alternative subsets in one pass as follows:</p>
-     *
-     * <p>{@code A_s,ctx = {i | (s, i, ctx, _)}} for each configuration in
-     * {@code C} holding {@code s} and {@code ctx} fixed.</p>
-     *
-     * <p>Or in pseudo-code, for each configuration {@code c} in {@code C}:</p>
-     *
-     * <pre>
-     * map[c] U= c.{@link ATNConfig#alt alt} # map hash/equals uses s and x, not
-     * alt and not pred
-     * </pre>
-     *
-     * <p>The values in {@code map} are the set of {@code A_s,ctx} sets.</p>
-     *
-     * <p>If {@code |A_s,ctx|=1} then there is no conflict associated with
-     * {@code s} and {@code ctx}.</p>
-     *
-     * <p>Reduce the subsets to singletons by choosing a minimum of each subset. If
-     * the union of these alternative subsets is a singleton, then no amount of
-     * more lookahead will help us. We will always pick that alternative. If,
-     * however, there is more than one alternative, then we are uncertain which
-     * alternative to predict and must continue looking for resolution. We may
-     * or may not discover an ambiguity in the future, even if there are no
-     * conflicting subsets this round.</p>
-     *
-     * <p>The biggest sin is to terminate early because it means we've made a
-     * decision but were uncertain as to the eventual outcome. We haven't used
-     * enough lookahead. On the other hand, announcing a conflict too late is no
-     * big deal; you will still have the conflict. It's just inefficient. It
-     * might even look until the end of file.</p>
-     *
-     * <p>No special consideration for semantic predicates is required because
-     * predicates are evaluated on-the-fly for full LL prediction, ensuring that
-     * no configuration contains a semantic context during the termination
-     * check.</p>
-     *
-     * <p><strong>CONFLICTING CONFIGS</strong></p>
-     *
-     * <p>Two configurations {@code (s, i, x)} and {@code (s, j, x')}, conflict
-     * when {@code i!=j} but {@code x=x'}. Because we merge all
-     * {@code (s, i, _)} configurations together, that means that there are at
-     * most {@code n} configurations associated with state {@code s} for
-     * {@code n} possible alternatives in the decision. The merged stacks
-     * complicate the comparison of configuration contexts {@code x} and
-     * {@code x'}. Sam checks to see if one is a subset of the other by calling
-     * merge and checking to see if the merged result is either {@code x} or
-     * {@code x'}. If the {@code x} associated with lowest alternative {@code i}
-     * is the superset, then {@code i} is the only possible prediction since the
-     * others resolve to {@code min(i)} as well. However, if {@code x} is
-     * associated with {@code j>i} then at least one stack configuration for
-     * {@code j} is not in conflict with alternative {@code i}. The algorithm
-     * should keep going, looking for more lookahead due to the uncertainty.</p>
-     *
-     * <p>For simplicity, I'm doing a equality check between {@code x} and
-     * {@code x'} that lets the algorithm continue to consume lookahead longer
-     * than necessary. The reason I like the equality is of course the
-     * simplicity but also because that is the test you need to detect the
-     * alternatives that are actually in conflict.</p>
-     *
-     * <p><strong>CONTINUE/STOP RULE</strong></p>
-     *
-     * <p>Continue if union of resolved alternative sets from non-conflicting and
-     * conflicting alternative subsets has more than one alternative. We are
-     * uncertain about which alternative to predict.</p>
-     *
-     * <p>The complete set of alternatives, {@code [i for (_,i,_)]}, tells us which
-     * alternatives are still in the running for the amount of input we've
-     * consumed at this point. The conflicting sets let us to strip away
-     * configurations that won't lead to more states because we resolve
-     * conflicts to the configuration with a minimum alternate for the
-     * conflicting set.</p>
-     *
-     * <p><strong>CASES</strong></p>
-     *
-     * <ul>
-     *
-     * <li>no conflicts and more than 1 alternative in set =&gt; continue</li>
-     *
-     * <li> {@code (s, 1, x)}, {@code (s, 2, x)}, {@code (s, 3, z)},
-     * {@code (s', 1, y)}, {@code (s', 2, y)} yields non-conflicting set
-     * {@code {3}} U conflicting sets {@code min({1,2})} U {@code min({1,2})} =
-     * {@code {1,3}} =&gt; continue
-     * </li>
-     *
-     * <li>{@code (s, 1, x)}, {@code (s, 2, x)}, {@code (s', 1, y)},
-     * {@code (s', 2, y)}, {@code (s'', 1, z)} yields non-conflicting set
-     * {@code {1}} U conflicting sets {@code min({1,2})} U {@code min({1,2})} =
-     * {@code {1}} =&gt; stop and predict 1</li>
-     *
-     * <li>{@code (s, 1, x)}, {@code (s, 2, x)}, {@code (s', 1, y)},
-     * {@code (s', 2, y)} yields conflicting, reduced sets {@code {1}} U
-     * {@code {1}} = {@code {1}} =&gt; stop and predict 1, can announce
-     * ambiguity {@code {1,2}}</li>
-     *
-     * <li>{@code (s, 1, x)}, {@code (s, 2, x)}, {@code (s', 2, y)},
-     * {@code (s', 3, y)} yields conflicting, reduced sets {@code {1}} U
-     * {@code {2}} = {@code {1,2}} =&gt; continue</li>
-     *
-     * <li>{@code (s, 1, x)}, {@code (s, 2, x)}, {@code (s', 3, y)},
-     * {@code (s', 4, y)} yields conflicting, reduced sets {@code {1}} U
-     * {@code {3}} = {@code {1,3}} =&gt; continue</li>
-     *
-     * </ul>
-     *
-     * <p><strong>EXACT AMBIGUITY DETECTION</strong></p>
-     *
-     * <p>If all states report the same conflicting set of alternatives, then we
-     * know we have the exact ambiguity set.</p>
-     *
-     * <p><code>|A_<em>i</em>|&gt;1</code> and
-     * <code>A_<em>i</em> = A_<em>j</em></code> for all <em>i</em>, <em>j</em>.</p>
-     *
-     * <p>In other words, we continue examining lookahead until all {@code A_i}
-     * have more than one alternative and all {@code A_i} are the same. If
-     * {@code A={{1,2}, {1,3}}}, then regular LL prediction would terminate
-     * because the resolved set is {@code {1}}. To determine what the real
-     * ambiguity is, we have to know whether the ambiguity is between one and
-     * two or one and three so we keep going. We can only stop prediction when
-     * we need exact ambiguity detection when the sets look like
-     * {@code A={{1,2}}} or {@code {{1,2},{1,2}}}, etc...</p>
-     */
-    static size_t resolvesToJustOneViableAlt(const std::vector<antlrcpp::BitSet> &altsets);
-
-    /// <summary>
-    /// Determines if every alternative subset in {@code altsets} contains more
-    /// than one alternative.
-    /// </summary>
-    /// <param name="altsets"> a collection of alternative subsets </param>
-    /// <returns> {@code true} if every <seealso cref="BitSet"/> in {@code altsets}
-    /// has
-    /// <seealso cref="BitSet#cardinality cardinality"/> &gt; 1, otherwise {@code
-    /// false} </returns>
-    static bool allSubsetsConflict(const std::vector<antlrcpp::BitSet> &altsets);
-
-    /// <summary>
-    /// Determines if any single alternative subset in {@code altsets} contains
-    /// exactly one alternative.
-    /// </summary>
-    /// <param name="altsets"> a collection of alternative subsets </param>
-    /// <returns> {@code true} if {@code altsets} contains a <seealso
-    /// cref="BitSet"/> with
-    /// <seealso cref="BitSet#cardinality cardinality"/> 1, otherwise {@code false}
-    /// </returns>
-    static bool hasNonConflictingAltSet(const std::vector<antlrcpp::BitSet> &altsets);
-
-    /// <summary>
-    /// Determines if any single alternative subset in {@code altsets} contains
-    /// more than one alternative.
-    /// </summary>
-    /// <param name="altsets"> a collection of alternative subsets </param>
-    /// <returns> {@code true} if {@code altsets} contains a <seealso
-    /// cref="BitSet"/> with
-    /// <seealso cref="BitSet#cardinality cardinality"/> &gt; 1, otherwise {@code
-    /// false} </returns>
-    static bool hasConflictingAltSet(const std::vector<antlrcpp::BitSet> &altsets);
-
-    /// <summary>
-    /// Determines if every alternative subset in {@code altsets} is equivalent.
-    /// </summary>
-    /// <param name="altsets"> a collection of alternative subsets </param>
-    /// <returns> {@code true} if every member of {@code altsets} is equal to the
-    /// others, otherwise {@code false} </returns>
-    static bool allSubsetsEqual(const std::vector<antlrcpp::BitSet> &altsets);
-
-    /// <summary>
-    /// Returns the unique alternative predicted by all alternative subsets in
-    /// {@code altsets}. If no such alternative exists, this method returns
-    /// <seealso cref="ATN#INVALID_ALT_NUMBER"/>.
-    /// </summary>
-    /// <param name="altsets"> a collection of alternative subsets </param>
-    static size_t getUniqueAlt(const std::vector<antlrcpp::BitSet> &altsets);
-
-    /// <summary>
-    /// Gets the complete set of represented alternatives for a collection of
-    /// alternative subsets. This method returns the union of each <seealso
-    /// cref="BitSet"/>
-    /// in {@code altsets}.
-    /// </summary>
-    /// <param name="altsets"> a collection of alternative subsets </param>
-    /// <returns> the set of represented alternatives in {@code altsets} </returns>
-    static antlrcpp::BitSet getAlts(const std::vector<antlrcpp::BitSet> &altsets);
-
-    /** Get union of all alts from configs. @since 4.5.1 */
-    static antlrcpp::BitSet getAlts(ATNConfigSet *configs);
-
-    /// <summary>
-    /// This function gets the conflicting alt subsets from a configuration set.
-    /// For each configuration {@code c} in {@code configs}:
-    ///
-    /// <pre>
-    /// map[c] U= c.<seealso cref="ATNConfig#alt alt"/> # map hash/equals uses s and
-    /// x, not
-    /// alt and not pred
-    /// </pre>
-    /// </summary>
-    static std::vector<antlrcpp::BitSet> getConflictingAltSubsets(ATNConfigSet *configs);
-
-    /// <summary>
-    /// Get a map from state to alt subset from a configuration set. For each
-    /// configuration {@code c} in {@code configs}:
-    ///
-    /// <pre>
-    /// map[c.<seealso cref="ATNConfig#state state"/>] U= c.<seealso
-    /// cref="ATNConfig#alt alt"/>
-    /// </pre>
-    /// </summary>
-    static std::map<ATNState*, antlrcpp::BitSet> getStateToAltMap(ATNConfigSet *configs);
-
-    static bool hasStateAssociatedWithOneAlt(ATNConfigSet *configs);
-
-    static size_t getSingleViableAlt(const std::vector<antlrcpp::BitSet> &altsets);
-  };
-
-} // namespace atn
-} // namespace antlr4

data/ext/express-parser/antlr4-upstream/runtime/Cpp/runtime/src/atn/ProfilingATNSimulator.cpp

@@ -1,179 +0,0 @@
-/* Copyright (c) 2012-2017 The ANTLR Project. All rights reserved.
- * Use of this file is governed by the BSD 3-clause license that
- * can be found in the LICENSE.txt file in the project root.
- */
-
-#include "atn/PredicateEvalInfo.h"
-#include "atn/LookaheadEventInfo.h"
-#include "Parser.h"
-#include "atn/ATNConfigSet.h"
-#include "support/CPPUtils.h"
-
-#include "atn/ProfilingATNSimulator.h"
-
-using namespace antlr4;
-using namespace antlr4::atn;
-using namespace antlr4::dfa;
-using namespace antlrcpp;
-
-using namespace std::chrono;
-
-ProfilingATNSimulator::ProfilingATNSimulator(Parser *parser)
-  : ParserATNSimulator(parser, parser->getInterpreter<ParserATNSimulator>()->atn,
-                       parser->getInterpreter<ParserATNSimulator>()->decisionToDFA,
-                       parser->getInterpreter<ParserATNSimulator>()->getSharedContextCache()) {
-  for (size_t i = 0; i < atn.decisionToState.size(); i++) {
-    _decisions.push_back(DecisionInfo(i));
-  }
-}
-
-size_t ProfilingATNSimulator::adaptivePredict(TokenStream *input, size_t decision, ParserRuleContext *outerContext) {
-  auto onExit = finally([this](){
-    _currentDecision = 0; // Originally -1, but that makes no sense (index into a vector and init value is also 0).
-  });
-
-  _sllStopIndex = -1;
-  _llStopIndex = -1;
-  _currentDecision = decision;
-  high_resolution_clock::time_point start = high_resolution_clock::now();
-  size_t alt = ParserATNSimulator::adaptivePredict(input, decision, outerContext);
-  high_resolution_clock::time_point stop = high_resolution_clock::now();
-  _decisions[decision].timeInPrediction += duration_cast<nanoseconds>(stop - start).count();
-  _decisions[decision].invocations++;
-
-  long long SLL_k = _sllStopIndex - _startIndex + 1;
-  _decisions[decision].SLL_TotalLook += SLL_k;
-  _decisions[decision].SLL_MinLook = _decisions[decision].SLL_MinLook == 0 ? SLL_k : std::min(_decisions[decision].SLL_MinLook, SLL_k);
-  if (SLL_k > _decisions[decision].SLL_MaxLook) {
-    _decisions[decision].SLL_MaxLook = SLL_k;
-    _decisions[decision].SLL_MaxLookEvent = std::make_shared<LookaheadEventInfo>(decision, nullptr, alt, input, _startIndex, _sllStopIndex, false);
-  }
-
-  if (_llStopIndex >= 0) {
-    long long LL_k = _llStopIndex - _startIndex + 1;
-    _decisions[decision].LL_TotalLook += LL_k;
-    _decisions[decision].LL_MinLook = _decisions[decision].LL_MinLook == 0 ? LL_k : std::min(_decisions[decision].LL_MinLook, LL_k);
-    if (LL_k > _decisions[decision].LL_MaxLook) {
-      _decisions[decision].LL_MaxLook = LL_k;
-      _decisions[decision].LL_MaxLookEvent = std::make_shared<LookaheadEventInfo>(decision, nullptr, alt, input, _startIndex, _llStopIndex, true);
-    }
-  }
-
-  return alt;
-}
-
-DFAState* ProfilingATNSimulator::getExistingTargetState(DFAState *previousD, size_t t) {
-  // this method is called after each time the input position advances
-  // during SLL prediction
-  _sllStopIndex = (int)_input->index();
-
-  DFAState *existingTargetState = ParserATNSimulator::getExistingTargetState(previousD, t);
-  if (existingTargetState != nullptr) {
-    _decisions[_currentDecision].SLL_DFATransitions++; // count only if we transition over a DFA state
-    if (existingTargetState == ERROR.get()) {
-      _decisions[_currentDecision].errors.push_back(
-        ErrorInfo(_currentDecision, previousD->configs.get(), _input, _startIndex, _sllStopIndex, false)
-      );
-    }
-  }
-
-  _currentState = existingTargetState;
-  return existingTargetState;
-}
-
-DFAState* ProfilingATNSimulator::computeTargetState(DFA &dfa, DFAState *previousD, size_t t) {
-  DFAState *state = ParserATNSimulator::computeTargetState(dfa, previousD, t);
-  _currentState = state;
-  return state;
-}
-
-std::unique_ptr<ATNConfigSet> ProfilingATNSimulator::computeReachSet(ATNConfigSet *closure, size_t t, bool fullCtx) {
-  if (fullCtx) {
-    // this method is called after each time the input position advances
-    // during full context prediction
-    _llStopIndex = (int)_input->index();
-  }
-
-  std::unique_ptr<ATNConfigSet> reachConfigs = ParserATNSimulator::computeReachSet(closure, t, fullCtx);
-  if (fullCtx) {
-    _decisions[_currentDecision].LL_ATNTransitions++; // count computation even if error
-    if (reachConfigs != nullptr) {
-    } else { // no reach on current lookahead symbol. ERROR.
-      // TODO: does not handle delayed errors per getSynValidOrSemInvalidAltThatFinishedDecisionEntryRule()
-      _decisions[_currentDecision].errors.push_back(ErrorInfo(_currentDecision, closure, _input, _startIndex, _llStopIndex, true));
-    }
-  } else {
-    ++_decisions[_currentDecision].SLL_ATNTransitions;
-    if (reachConfigs != nullptr) {
-    } else { // no reach on current lookahead symbol. ERROR.
-      _decisions[_currentDecision].errors.push_back(ErrorInfo(_currentDecision, closure, _input, _startIndex, _sllStopIndex, false));
-    }
-  }
-  return reachConfigs;
-}
-
-bool ProfilingATNSimulator::evalSemanticContext(Ref<SemanticContext> const& pred, ParserRuleContext *parserCallStack,
-                                                size_t alt, bool fullCtx) {
-  bool result = ParserATNSimulator::evalSemanticContext(pred, parserCallStack, alt, fullCtx);
-  if (!(std::dynamic_pointer_cast<SemanticContext::PrecedencePredicate>(pred) != nullptr)) {
-    bool fullContext = _llStopIndex >= 0;
-    int stopIndex = fullContext ? _llStopIndex : _sllStopIndex;
-    _decisions[_currentDecision].predicateEvals.push_back(
-      PredicateEvalInfo(_currentDecision, _input, _startIndex, stopIndex, pred, result, alt, fullCtx));
-  }
-
-  return result;
-}
-
-void ProfilingATNSimulator::reportAttemptingFullContext(DFA &dfa, const BitSet &conflictingAlts, ATNConfigSet *configs,
-                                                        size_t startIndex, size_t stopIndex) {
-  if (conflictingAlts.count() > 0) {
-    conflictingAltResolvedBySLL = conflictingAlts.nextSetBit(0);
-  } else {
-    conflictingAltResolvedBySLL = configs->getAlts().nextSetBit(0);
-  }
-  _decisions[_currentDecision].LL_Fallback++;
-  ParserATNSimulator::reportAttemptingFullContext(dfa, conflictingAlts, configs, startIndex, stopIndex);
-}
-
-void ProfilingATNSimulator::reportContextSensitivity(DFA &dfa, size_t prediction, ATNConfigSet *configs,
-                                                     size_t startIndex, size_t stopIndex) {
-  if (prediction != conflictingAltResolvedBySLL) {
-    _decisions[_currentDecision].contextSensitivities.push_back(
-      ContextSensitivityInfo(_currentDecision, configs, _input, startIndex, stopIndex)
-    );
-  }
-  ParserATNSimulator::reportContextSensitivity(dfa, prediction, configs, startIndex, stopIndex);
-}
-
-void ProfilingATNSimulator::reportAmbiguity(DFA &dfa, DFAState *D, size_t startIndex, size_t stopIndex, bool exact,
-                                            const BitSet &ambigAlts, ATNConfigSet *configs) {
-  size_t prediction;
-  if (ambigAlts.count() > 0) {
-    prediction = ambigAlts.nextSetBit(0);
-  } else {
-    prediction = configs->getAlts().nextSetBit(0);
-  }
-  if (configs->fullCtx && prediction != conflictingAltResolvedBySLL) {
-    // Even though this is an ambiguity we are reporting, we can
-    // still detect some context sensitivities.  Both SLL and LL
-    // are showing a conflict, hence an ambiguity, but if they resolve
-    // to different minimum alternatives we have also identified a
-    // context sensitivity.
-    _decisions[_currentDecision].contextSensitivities.push_back(
-      ContextSensitivityInfo(_currentDecision, configs, _input, startIndex, stopIndex)
-    );
-  }
-  _decisions[_currentDecision].ambiguities.push_back(
-    AmbiguityInfo(_currentDecision, configs, ambigAlts, _input, startIndex, stopIndex, configs->fullCtx)
-  );
-  ParserATNSimulator::reportAmbiguity(dfa, D, startIndex, stopIndex, exact, ambigAlts, configs);
-}
-
-std::vector<DecisionInfo> ProfilingATNSimulator::getDecisionInfo() const {
-  return _decisions;
-}
-
-DFAState* ProfilingATNSimulator::getCurrentState() const {
-  return _currentState;
-}