exo_cms 0.0.1

data/config/initializers/devise.rb

@@ -0,0 +1,246 @@
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class with default "from" parameter.
+  config.mailer_sender = "please-change-me-at-config-initializers-devise@example.com"
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = "Devise::Mailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/mongoid'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [ :email ]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [ :email ]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:token]` will
+  # enable it only for token authentication. The supported strategies are:
+  # :database      = Support basic authentication with authentication key + password
+  # :token         = Support basic authentication with token authentication key
+  # :token_options = Support token authentication with options as defined in
+  #                  http://api.rubyonrails.org/classes/ActionController/HttpAuthentication/Token.html
+  # config.http_authenticatable = false
+
+  # If http headers should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. "Application" by default.
+  # config.http_authentication_realm = "Application"
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # :http_auth and :token_auth by adding those symbols to the array below.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing :skip => :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments.
+  config.stretches = Rails.env.test? ? 1 : 10
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = "7a1fcf3fd46453f90d050173e084ef1712f5962f06d1724ff9d6c7e667a6abaa634bad7c553da2e61fca916d97f1d64336952f8ea5366c05b00b41f422bceb44"
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming his account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming his account,
+  # access will be blocked just in the third day. Default is 0.days, meaning
+  # the user cannot access the website without confirming his account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # A period that the user is allowed to confirm their account before their
+  # token becomes invalid. For example, if set to 3.days, the user can confirm
+  # their account within 3 days after the mail was sent, but on the fourth day
+  # their account can't be confirmed with the token any more.
+  # Default is nil, meaning there is no restriction on how long a user can take
+  # before confirming their account.
+  # config.confirm_within = 3.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed new email is stored in
+  # unconfirmed email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [ :email ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # :secure => true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length. Default is 8..128.
+  config.password_length = 8..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  # config.email_regexp = /\A[^@]+@[^@]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # If true, expires auth token on session timeout.
+  # config.expire_auth_token_on_timeout = false
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [ :email ]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper).
+  #
+  # Require the `devise-encryptable` gem when using anything other than bcrypt
+  # config.encryptor = :sha512
+
+  # ==> Configuration for :token_authenticatable
+  # Defines name of the authentication token params key
+  # config.token_authentication_key = :auth_token
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  config.scoped_views = true
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Set this configuration to false if you want /users/sign_out to sign out
+  # only the current scope. By default, Devise signs out all scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ["*/*", :html]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
+  # end
+
+  # ==> Mountable engine configurations
+  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
+  # is mountable, there are some extra configurations to be taken into account.
+  # The following options are available, assuming the engine is mounted as:
+  #
+  #     mount MyEngine, at: "/my_engine"
+  #
+  # The router that invoked `devise_for`, in the example above, would be:
+  config.router_name = :exo
+  #
+  # When using omniauth, Devise cannot automatically set Omniauth path,
+  # so you need to do it manually. For the users scope, it would be:
+  # config.omniauth_path_prefix = "/my_engine/users/auth"
+end

data/config/initializers/simple_form_foundation.rb

@@ -0,0 +1,27 @@
+require 'simple_form'
+# Use this setup block to configure all options available in SimpleForm.
+SimpleForm.setup do |config|
+  config.wrappers :foundation, class: :input, hint_class: :field_with_hint, error_class: :error do |b|
+    b.use :html5
+    b.use :placeholder
+    b.optional :maxlength
+    b.optional :pattern
+    b.optional :min_max
+    b.optional :readonly
+    b.use :label_input
+    b.use :error, wrap_with: { tag: :small }
+
+    # Uncomment the following line to enable hints. The line is commented out by default since Foundation
+    # does't provide styles for hints. You will need to provide your own CSS styles for hints.
+    # b.use :hint,  wrap_with: { tag: :span, class: :hint }
+  end
+
+  # CSS class for buttons
+  config.button_class = 'button'
+
+  # CSS class to add for error notification helper.
+  config.error_notification_class = 'alert-box alert'
+
+  # The default wrapper to be used by the FormBuilder.
+  config.default_wrapper = :foundation
+end

data/config/routes.rb

@@ -0,0 +1,42 @@
+Exo::Engine.routes.draw do
+  if ['development', 'test'].include?(Rails.env)
+    _site_grid_fs_path = '/grid_fs/exo/:site_slug_id/'
+    get "#{_site_grid_fs_path}/resources/:resource_slug_id/:item_slug_id/:field_slug_id/*file_name", to: 'gridfs#item_asset'
+    get "#{_site_grid_fs_path}/:id/*file_name", to: 'gridfs#asset'
+  end
+
+  root 'pages#serve_page', route_path: '/'
+
+  # get '/admin', to: 'admin/site#show', as: 'contributor_root'
+  # 
+  # get '/admin', to: 'admin/site#show', as: 'admin_contributor_root'
+    
+  put '/admin/pages/blocks', to: 'admin/ckeditor_blocks#update'
+
+  devise_for(
+    :contributors,
+    class_name: "Exo::Contributor", module: :devise, :path => '/admin',
+    controllers: {
+      sessions: "exo/admin/sessions"
+    }
+  )
+
+  namespace :admin, module: 'admin' do
+    root 'site#show', route_path: '/'
+    # put '/pages/blocks', to: 'ckeditor_blocks#update'
+    #devise_for :contributors, class_name: "Exo::Contributor", module: :devise, :path => '/'
+
+    resources :contributors
+    resources :settings
+    resources :assets
+    resources :routes, only: [:index, :show, :edit, :picture] do
+      resources :settings
+    end
+    resources :resources, only: [:index, :show] do
+      resources :items, except: :index
+    end
+    resources :ckeditor_assets, only: :create
+  end
+
+  get '/*route_path' => 'pages#serve_page'
+end

data/lib/exo/engine.rb

@@ -0,0 +1,7 @@
+require 'exo/regexp'
+
+class Exo
+  class Engine < ::Rails::Engine
+    isolate_namespace Exo
+  end
+end

data/lib/exo/regexp.rb

@@ -0,0 +1,6 @@
+module Exo::Regexp
+  HOST = /\A([a-z0-9-]+\.)*[a-z0-9-]+\.[a-z]{2,4}\z/
+  REL_PATH = /\A[a-z0-9_]+(\/[a-z0-9_]+)*\z/
+  ABSOLUTE_PATH = /\A\/([a-z0-9_]+\/)*([a-z0-9_]+(\.[a-z0-9_]+)?)?\z/
+  ROUTING_PATH = /\A\/((:|\*)?[a-z0-9_]+\/)*((:|\*)?[a-z0-9_]+(\.[a-z0-9_]+)?)?\z/
+end

data/lib/exo/version.rb

@@ -0,0 +1,3 @@
+class Exo
+  VERSION = "0.0.1"
+end

data/lib/exo.rb

@@ -0,0 +1,30 @@
+require "exo/engine"
+
+class Exo
+  include Singleton
+
+  def self.config &block
+    block.call self.instance
+  end
+
+  attr_accessor :services
+
+  def initialize
+    self.services = {}
+  end
+
+  def register_services hash
+    self.services = hash
+  end
+end
+
+# Exo.config do |s|
+#   s.generic_services(
+#     'Messages' => '/somepath'
+#   )
+# 
+#   s.register_models(
+#     SomeNamespace::AModel,
+#     SomeNamespace::AnotherModel
+#   )
+# end

data/lib/tasks/ckeditor.rake

@@ -0,0 +1,9 @@
+namespace :exo do
+  namespace :ckeditor do
+    desc "Railsing ckeditor source folder"
+    task railsing!: :environment do
+      path = File.join Rails.root, '_vendor', 'ckeditor'
+      CkeditorRailser.new().process path
+    end
+  end
+end

data/lib/tasks/contributor.rake

@@ -0,0 +1,11 @@
+namespace :exo do
+  namespace :contributors do
+    desc "Generate a contributor"
+    task :new, [:email, :password] => :environment do |t, args|
+      c = Exo::Contributor.new
+      c.email = args[:email]
+      c.password = args[:password]
+      c.save!
+    end
+  end
+end

data/lib/tasks/exo_engine_tasks.rake

@@ -0,0 +1,4 @@
+# desc "Explaining what the task does"
+# task :exo_engine do
+#   # Task goes here
+# end

data/lib/tasks/generate.rake

@@ -0,0 +1,8 @@
+namespace :exo do
+  desc "Generate site folder and config file"
+  task :generate, [:slug] => :environment do |t, args|
+    g = Exo::Generator.new args[:slug]
+    g.generates_config
+    g.generates_folders
+  end
+end

data/lib/tasks/migration.rake

@@ -0,0 +1,13 @@
+namespace :exo do
+  desc "Migrate values to _values"
+  task value_migration: :environment do |t, args|
+    Exo::Resource::Item.each do |i|
+      begin
+        i.migrate_values!
+      rescue Exception => e
+        puts "=> #{i.inspect}\n#{e.message}\n#{e.backtrace}"
+        raise e
+      end
+    end
+  end
+end

data/lib/tasks/seed.rake

@@ -0,0 +1,7 @@
+namespace :exo do
+  desc "Seed targeted theme"
+  task :seed, [:slug] => :environment do |t, args|
+    require 'exo/config'
+    Exo::Config.new(args[:slug], args).install!
+  end
+end

data/spec/dummy/Rakefile

@@ -0,0 +1,6 @@
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require File.expand_path('../config/application', __FILE__)
+
+Dummy::Application.load_tasks

data/spec/dummy/app/assets/javascripts/application.js

@@ -0,0 +1,13 @@
+// This is a manifest file that'll be compiled into application.js, which will include all the files
+// listed below.
+//
+// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts,
+// or vendor/assets/javascripts of plugins, if any, can be referenced here using a relative path.
+//
+// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
+// compiled file.
+//
+// Read Sprockets README (https://github.com/sstephenson/sprockets#sprockets-directives) for details
+// about supported directives.
+//
+//= require_tree .

data/spec/dummy/app/assets/stylesheets/application.css

@@ -0,0 +1,13 @@
+/*
+ * This is a manifest file that'll be compiled into application.css, which will include all the files
+ * listed below.
+ *
+ * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets,
+ * or vendor/assets/stylesheets of plugins, if any, can be referenced here using a relative path.
+ *
+ * You're free to add application-wide styles to this file and they'll appear at the top of the
+ * compiled file, but it's generally better to create a new file per style scope.
+ *
+ *= require_self
+ *= require_tree .
+ */

data/spec/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,5 @@
+class ApplicationController < ActionController::Base
+  # Prevent CSRF attacks by raising an exception.
+  # For APIs, you may want to use :null_session instead.
+  protect_from_forgery with: :exception
+end

data/spec/dummy/app/controllers/exo/admin/customs_controller.rb

@@ -0,0 +1,7 @@
+module Exo::Admin
+  class CustomsController < ApplicationController
+    def index
+      
+    end
+  end
+end

data/spec/dummy/app/controllers/my_app/site_customs_controller.rb

@@ -0,0 +1,10 @@
+module MyApp
+  class SiteCustomsController < ApplicationController
+    include ::Exo::Admin::SiteSlugIdFilter
+
+    protected
+    def allowed_sites
+      ['a_site_slug_id', 'another_site_slug_id']
+    end
+  end
+end

data/spec/dummy/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/spec/dummy/app/views/a_sierra_theme/a_page.html.haml

@@ -0,0 +1 @@
+#a_page

data/spec/dummy/app/views/a_sierra_theme/a_page_with_block.html.haml

@@ -0,0 +1,3 @@
+#a_page
+  = mask_tag :page_block, class: 'some_class', style: 'color: green' do
+    #default_content Default content

data/spec/dummy/app/views/demo/home.html.haml

@@ -0,0 +1,3 @@
+%h1 home
+= exo_block_tag(:content) do
+  Lorem ipsum

data/spec/dummy/app/views/demo/posts/show.html.haml

@@ -0,0 +1,3 @@
+%h1 post
+= exo_block_tag(:content) do
+  Lorem ipsum

data/spec/dummy/app/views/exo/admin/customs/index.html.haml

@@ -0,0 +1 @@
+%h1#customs_index Customs

data/spec/dummy/app/views/layouts/a_sierra_theme/application.html.erb

@@ -0,0 +1,14 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>Dummy</title>
+  <%= stylesheet_link_tag    "application", media: "all", "data-turbolinks-track" => true %>
+  <%= javascript_include_tag "application", "data-turbolinks-track" => true %>
+  <%= csrf_meta_tags %>
+</head>
+<body>
+
+<%= yield %>
+
+</body>
+</html>

data/spec/dummy/app/views/layouts/demo/application.html.haml

@@ -0,0 +1,11 @@
+!!!
+%html
+  %head
+    %title= @page_name || tick.site.slug_id
+    %meta{'http-equiv' => "content-language", :content => 'fr'}
+    %meta{'http-equiv' => "Content-Type", :content => "text/html; charset=ISO-8859-1"}
+    = stylesheet_link_tag    tick.site.nest_path(:application), media: "all", "data-turbolinks-track" => true
+    = javascript_include_tag tick.site.nest_path(:application), "data-turbolinks-track" => true
+    = csrf_meta_tags
+  %body
+    = yield

data/spec/dummy/app/views/my_app/site_customs/index.html.haml

@@ -0,0 +1 @@
+%h1#site_customs Site customs

data/spec/dummy/bin/bundle

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+load Gem.bin_path('bundler', 'bundle')

data/spec/dummy/bin/rails

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+APP_PATH = File.expand_path('../../config/application',  __FILE__)
+require_relative '../config/boot'
+require 'rails/commands'

data/spec/dummy/bin/rake

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+require_relative '../config/boot'
+require 'rake'
+Rake.application.run

data/spec/dummy/config/application.rb

@@ -0,0 +1,27 @@
+require File.expand_path('../boot', __FILE__)
+
+#require 'rails/all'
+require "action_controller/railtie"
+require "action_mailer/railtie"
+#require "active_resource/railtie"
+require "rails/test_unit/railtie"
+
+Bundler.require(*Rails.groups)
+require "exo"
+
+module Dummy
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    # config.i18n.default_locale = :de
+  end
+end
+

data/spec/dummy/config/boot.rb

@@ -0,0 +1,5 @@
+# Set up gems listed in the Gemfile.
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
+
+require 'bundler/setup' if File.exists?(ENV['BUNDLE_GEMFILE'])
+$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)

data/spec/dummy/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+development:
+  adapter: sqlite3
+  database: db/development.sqlite3
+  pool: 5
+  timeout: 5000
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  adapter: sqlite3
+  database: db/test.sqlite3
+  pool: 5
+  timeout: 5000
+
+production:
+  adapter: sqlite3
+  database: db/production.sqlite3
+  pool: 5
+  timeout: 5000

data/spec/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Dummy::Application.initialize!