exiftool_vendored 10.40.0 → 10.43.0

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/GIF.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/GIF.t".
 
-BEGIN { $| = 1; print "1..5\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..5\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/GIMP.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/GIMP.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/GPS.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/GPS.t".
 
-BEGIN { $| = 1; print "1..3\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..3\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)
@@ -28,14 +28,18 @@ my $testnum = 1;
 # test 3: Write some new information
 {
     ++$testnum;
-    my @writeInfo = (
-        ['GPSLatitude' => "12 deg 21' 23.345"],
-        ['GPSLatitudeRef' => 'south' ],
-        ['GPSTimeStamp' => '2007:03:02 18:46:10.55-05:30' ],
-        ['GPSDateStamp' => '2007:03:02 18:46:10.55-05:30' ],
-    );
-    print 'not ' unless writeCheck(\@writeInfo, $testname, $testnum);
-    print "ok $testnum\n";
+    if (eval { require Time::Local }) {
+        my @writeInfo = (
+            ['GPSLatitude' => "12 deg 21' 23.345"],
+            ['GPSLatitudeRef' => 'south' ],
+            ['GPSTimeStamp' => '2007:03:02 18:46:10.55-05:30' ],
+            ['GPSDateStamp' => '2007:03:02 18:46:10.55-05:30' ],
+        );
+        print 'not ' unless writeCheck(\@writeInfo, $testname, $testnum);
+        print "ok $testnum\n";
+    } else {
+        print "ok $testnum # skip Requires Time::Local\n";
+    }
 }
 
 

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/GeoTiff.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/GeoTiff.t".
 
-BEGIN { $| = 1; print "1..4\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..4\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/Geotag.t

@@ -5,7 +5,7 @@ my $numTests;
 
 BEGIN {
     $numTests = 11;
-    $| = 1; print "1..$numTests\n"; $Image::ExifTool::noConfig = 1;
+    $| = 1; print "1..$numTests\n"; $Image::ExifTool::configFile = '';
     # must create user-defined tags before loading ExifTool (used in test 8)
     %Image::ExifTool::UserDefined = (
         'Image::ExifTool::GPS::Main' => {

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/Geotag_7.out

@@ -32,7 +32,6 @@ Rewriting t/images/Writer.jpg...
   Creating tags in: APP1 File GPS IFD0 MIE-GPS 
 Creating APP1:
   Creating IFD0
-  ExifByteOrder = MM
     + IFD0:XResolution = '72' (mandatory)
     + IFD0:YResolution = '72' (mandatory)
     + IFD0:ResolutionUnit = '2' (mandatory)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/HTML.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/HTML.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/IPTC.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/IPTC.t".
 
-BEGIN { $| = 1; print "1..8\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..8\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/ISO.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/ISO.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/ITC.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/ITC.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/InDesign.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/InDesign.t".
 
-BEGIN { $| = 1; print "1..4\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..4\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/JVC.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/JVC.t".
 
-BEGIN { $| = 1; print "1..3\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..3\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/Jpeg2000.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/Jpeg2000.t".
 
-BEGIN { $| = 1; print "1..4\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..4\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/Kodak.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/Kodak.t".
 
-BEGIN { $| = 1; print "1..3\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..3\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/KyoceraRaw.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/KyoceraRaw.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/LNK.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/LNK.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/Lang.t

@@ -1,7 +1,7 @@
 # Before `make install' is performed this script should be runnable with
 # `make test'. After `make install' it should work as `perl t/Lang.t'
 
-BEGIN { $Image::ExifTool::noConfig = 1; }
+BEGIN { $Image::ExifTool::configFile = ''; }
 
 use Image::ExifTool;
 use t::TestLib;

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/Lytro.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/Lytro.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/M2TS.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/M2TS.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/MIE.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/MIE.t".
 
-BEGIN { $| = 1; print "1..6\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..6\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/MIFF.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/MIFF.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/MOI.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/MOI.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/MP3.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/MP3.t".
 
-BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..2\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)

data/bin/{Image-ExifTool-10.40 → Image-ExifTool-10.43}/t/MWG.t

@@ -1,7 +1,7 @@
 # Before "make install", this script should be runnable with "make test".
 # After "make install" it should work as "perl t/MWG.t".
 
-BEGIN { $| = 1; print "1..7\n"; $Image::ExifTool::noConfig = 1; }
+BEGIN { $| = 1; print "1..7\n"; $Image::ExifTool::configFile = ''; }
 END {print "not ok 1\n" unless $loaded;}
 
 # test 1: Load the module(s)