eventmachine 1.0.0.beta.2-x86-mingw32

data/lib/em/buftok.rb

@@ -0,0 +1,138 @@
+# BufferedTokenizer - Statefully split input data by a specifiable token
+#
+# Authors:: Tony Arcieri, Martin Emde
+#
+#----------------------------------------------------------------------------
+#
+# Copyright (C) 2006-07 by Tony Arcieri and Martin Emde
+# 
+# Distributed under the Ruby license (http://www.ruby-lang.org/en/LICENSE.txt)
+#
+#---------------------------------------------------------------------------
+#
+
+# (C)2006 Tony Arcieri, Martin Emde
+# Distributed under the Ruby license (http://www.ruby-lang.org/en/LICENSE.txt)
+
+# BufferedTokenizer takes a delimiter upon instantiation, or acts line-based
+# by default.  It allows input to be spoon-fed from some outside source which
+# receives arbitrary length datagrams which may-or-may-not contain the token
+# by which entities are delimited.
+#
+# Commonly used to parse lines out of incoming data:
+#
+#  module LineBufferedConnection
+#    def receive_data(data)
+#      (@buffer ||= BufferedTokenizer.new).extract(data).each do |line|
+#        receive_line(line)
+#      end
+#    end
+#  end
+
+class BufferedTokenizer
+  # New BufferedTokenizers will operate on lines delimited by "\n" by default
+  # or allow you to specify any delimiter token you so choose, which will then
+  # be used by String#split to tokenize the input data
+  def initialize(delimiter = "\n", size_limit = nil)
+    # Store the specified delimiter
+    @delimiter = delimiter
+
+    # Store the specified size limitation
+    @size_limit = size_limit
+
+    # The input buffer is stored as an array.  This is by far the most efficient
+    # approach given language constraints (in C a linked list would be a more
+    # appropriate data structure).  Segments of input data are stored in a list
+    # which is only joined when a token is reached, substantially reducing the
+    # number of objects required for the operation.
+    @input = []
+
+    # Size of the input buffer
+    @input_size = 0
+  end
+
+  # Extract takes an arbitrary string of input data and returns an array of
+  # tokenized entities, provided there were any available to extract.  This
+  # makes for easy processing of datagrams using a pattern like:
+  #
+  #   tokenizer.extract(data).map { |entity| Decode(entity) }.each do ...
+  def extract(data)
+    # Extract token-delimited entities from the input string with the split command.
+    # There's a bit of craftiness here with the -1 parameter.  Normally split would
+    # behave no differently regardless of if the token lies at the very end of the 
+    # input buffer or not (i.e. a literal edge case)  Specifying -1 forces split to
+    # return "" in this case, meaning that the last entry in the list represents a
+    # new segment of data where the token has not been encountered
+    entities = data.split @delimiter, -1
+
+    # Check to see if the buffer has exceeded capacity, if we're imposing a limit
+    if @size_limit
+      raise 'input buffer full' if @input_size + entities.first.size > @size_limit
+      @input_size += entities.first.size
+    end
+    
+    # Move the first entry in the resulting array into the input buffer.  It represents
+    # the last segment of a token-delimited entity unless it's the only entry in the list.
+    @input << entities.shift
+
+    # If the resulting array from the split is empty, the token was not encountered
+    # (not even at the end of the buffer).  Since we've encountered no token-delimited
+    # entities this go-around, return an empty array.
+    return [] if entities.empty?
+
+    # At this point, we've hit a token, or potentially multiple tokens.  Now we can bring
+    # together all the data we've buffered from earlier calls without hitting a token,
+    # and add it to our list of discovered entities.
+    entities.unshift @input.join
+
+=begin
+    # Note added by FC, 10Jul07. This paragraph contains a regression. It breaks
+    # empty tokens. Think of the empty line that delimits an HTTP header. It will have
+    # two "\n" delimiters in a row, and this code mishandles the resulting empty token.
+    # It someone figures out how to fix the problem, we can re-enable this code branch.
+    # Multi-character token support.
+    # Split any tokens that were incomplete on the last iteration buf complete now.
+    entities.map! do |e|
+      e.split @delimiter, -1
+    end
+    # Flatten the resulting array.  This has the side effect of removing the empty
+    # entry at the end that was produced by passing -1 to split.  Add it again if
+    # necessary.
+    if (entities[-1] == [])
+      entities.flatten! << []
+    else
+      entities.flatten!
+    end
+=end
+
+    # Now that we've hit a token, joined the input buffer and added it to the entities
+    # list, we can go ahead and clear the input buffer.  All of the segments that were
+    # stored before the join can now be garbage collected.
+    @input.clear
+    
+    # The last entity in the list is not token delimited, however, thanks to the -1
+    # passed to split.  It represents the beginning of a new list of as-yet-untokenized  
+    # data, so we add it to the start of the list.
+    @input << entities.pop
+    
+    # Set the new input buffer size, provided we're keeping track
+    @input_size = @input.first.size if @size_limit
+
+    # Now we're left with the list of extracted token-delimited entities we wanted
+    # in the first place.  Hooray!
+    entities
+  end
+  
+  # Flush the contents of the input buffer, i.e. return the input buffer even though
+  # a token has not yet been encountered
+  def flush
+    buffer = @input.join
+    @input.clear
+    buffer
+  end
+
+  # Is the buffer empty?
+  def empty?
+    @input.empty?
+  end
+end

data/lib/em/callback.rb

@@ -0,0 +1,26 @@
+module EventMachine
+  # Utility method for coercing arguments to an object that responds to #call
+  # Accepts an object and a method name to send to, or a block, or an object
+  # that responds to call.
+  #
+  #  cb = EM.Callback{ |msg| puts(msg) }
+  #  cb.call('hello world')
+  #
+  #  cb = EM.Callback(Object, :puts)
+  #  cb.call('hello world')
+  #
+  #  cb = EM.Callback(proc{ |msg| puts(msg) })
+  #  cb.call('hello world')
+  #
+  def self.Callback(object = nil, method = nil, &blk)
+    if object && method
+      lambda { |*args| object.send method, *args }
+    else
+      if object.respond_to? :call
+        object
+      else 
+        blk || raise(ArgumentError)
+      end
+    end
+  end
+end

data/lib/em/channel.rb

@@ -0,0 +1,57 @@
+module EventMachine
+  # Provides a simple interface to push items to a number of subscribers. The
+  # channel will schedule all operations on the main reactor thread for thread
+  # safe reactor operations.
+  #
+  # This provides a convenient way for connections to consume messages from 
+  # long running code in defer, without threading issues.
+  #
+  #  channel = EM::Channel.new
+  #  sid = channel.subscribe{ |msg| p [:got, msg] }
+  #  channel.push('hello world')
+  #  channel.unsubscribe(sid)
+  #
+  # See examples/ex_channel.rb for a detailed example.
+  class Channel
+    # Create a new channel
+    def initialize
+      @subs = {}
+      @uid = 0
+    end
+
+    # Takes any arguments suitable for EM::Callback() and returns a subscriber
+    # id for use when unsubscribing.
+    def subscribe(*a, &b)
+      name = gen_id
+      EM.schedule { @subs[name] = EM::Callback(*a, &b) }
+      name
+    end
+
+    # Removes this subscriber from the list.
+    def unsubscribe(name)
+      EM.schedule { @subs.delete name }
+    end
+
+    # Add items to the channel, which are pushed out to all subscribers.
+    def push(*items)
+      items = items.dup
+      EM.schedule { items.each { |i| @subs.values.each { |s| s.call i } } }
+    end
+    alias << push
+
+    # Receive exactly one message from the channel.
+    def pop(*a, &b)
+      EM.schedule {
+        name = subscribe do |*args|
+          unsubscribe(name)
+          EM::Callback(*a, &b).call(*args)
+        end
+      }
+    end
+
+    private
+    def gen_id # :nodoc:
+      @uid += 1
+    end
+  end
+end

data/lib/em/connection.rb

@@ -0,0 +1,569 @@
+module EventMachine
+  class FileNotFoundException < Exception # :nodoc:
+  end
+
+  # EventMachine::Connection is a class that is instantiated
+  # by EventMachine's processing loop whenever a new connection
+  # is created. (New connections can be either initiated locally
+  # to a remote server or accepted locally from a remote client.)
+  # When a Connection object is instantiated, it <i>mixes in</i>
+  # the functionality contained in the user-defined module
+  # specified in calls to EventMachine#connect or EventMachine#start_server.
+  # User-defined handler modules may redefine any or all of the standard
+  # methods defined here, as well as add arbitrary additional code
+  # that will also be mixed in.
+  #
+  # EventMachine manages one object inherited from EventMachine::Connection
+  # (and containing the mixed-in user code) for every network connection
+  # that is active at any given time.
+  # The event loop will automatically call methods on EventMachine::Connection
+  # objects whenever specific events occur on the corresponding connections,
+  # as described below.
+  #
+  # This class is never instantiated by user code, and does not publish an
+  # initialize method. The instance methods of EventMachine::Connection
+  # which may be called by the event loop are: post_init, receive_data,
+  # and unbind. All of the other instance methods defined here are called
+  # only by user code.
+  #
+  class Connection
+    attr_accessor :signature # :nodoc:
+
+    # Override .new so subclasses don't have to call super and can ignore
+    # connection-specific arguments
+    #
+    def self.new(sig, *args) #:nodoc:
+      allocate.instance_eval do
+        # Store signature
+        @signature = sig
+        # associate_callback_target sig
+
+        # Call a superclass's #initialize if it has one
+        initialize(*args)
+
+        # post initialize callback
+        post_init
+
+        self
+      end
+    end
+
+    # Stubbed initialize so legacy superclasses can safely call super
+    #
+    def initialize(*args) #:nodoc:
+    end
+
+    # def associate_callback_target(sig) #:nodoc:
+    #   # no-op for the time being, to match similar no-op in rubymain.cpp
+    # end
+
+    # EventMachine::Connection#post_init is called by the event loop
+    # immediately after the network connection has been established,
+    # and before resumption of the network loop.
+    # This method is generally not called by user code, but is called automatically
+    # by the event loop. The base-class implementation is a no-op.
+    # This is a very good place to initialize instance variables that will
+    # be used throughout the lifetime of the network connection.
+    #
+    def post_init
+    end
+
+    # EventMachine::Connection#receive_data is called by the event loop
+    # whenever data has been received by the network connection.
+    # It is never called by user code.
+    # receive_data is called with a single parameter, a String containing
+    # the network protocol data, which may of course be binary. You will
+    # generally redefine this method to perform your own processing of the incoming data.
+    #
+    # Here's a key point which is essential to understanding the event-driven
+    # programming model: <i>EventMachine knows absolutely nothing about the protocol
+    # which your code implements.</i> You must not make any assumptions about
+    # the size of the incoming data packets, or about their alignment on any
+    # particular intra-message or PDU boundaries (such as line breaks).
+    # receive_data can and will send you arbitrary chunks of data, with the
+    # only guarantee being that the data is presented to your code in the order
+    # it was collected from the network. Don't even assume that the chunks of
+    # data will correspond to network packets, as EventMachine can and will coalesce
+    # several incoming packets into one, to improve performance. The implication for your
+    # code is that you generally will need to implement some kind of a state machine
+    # in your redefined implementation of receive_data. For a better understanding
+    # of this, read through the examples of specific protocol handlers in EventMachine::Protocols
+    #
+    # The base-class implementation of receive_data (which will be invoked if
+    # you don't redefine it) simply prints the size of each incoming data packet
+    # to stdout.
+    #
+    def receive_data data
+      puts "............>>>#{data.length}"
+    end
+
+    # #ssl_handshake_completed is called by EventMachine when the SSL/TLS handshake has
+    # been completed, as a result of calling #start_tls to initiate SSL/TLS on the connection.
+    #
+    # This callback exists because #post_init and #connection_completed are <b>not</b> reliable
+    # for indicating when an SSL/TLS connection is ready to have it's certificate queried for.
+    #
+    # See #get_peer_cert for application and example.
+    def ssl_handshake_completed
+    end
+
+    # #ssl_verify_peer is called by EventMachine when :verify_peer => true has been passed to #start_tls.
+    # It will be called with each certificate in the certificate chain provided by the remote peer.
+    # The cert will be passed as a String in PEM format, the same as in #get_peer_cert. It is up to user defined
+    # code to perform a check on the certificates. The return value from this callback is used to accept or deny the peer.
+    # A return value that is not nil or false triggers acceptance. If the peer is not accepted, the connection
+    # will be subsequently closed. See 'tests/test_ssl_verify.rb' for a simple example.
+    def ssl_verify_peer(cert)
+    end
+
+    # EventMachine::Connection#unbind is called by the framework whenever a connection
+    # (either a server or client connection) is closed. The close can occur because
+    # your code intentionally closes it (see close_connection and close_connection_after_writing),
+    # because the remote peer closed the connection, or because of a network error.
+    # You may not assume that the network connection is still open and able to send or
+    # receive data when the callback to unbind is made. This is intended only to give
+    # you a chance to clean up associations your code may have made to the connection
+    # object while it was open.
+    #
+    def unbind
+    end
+
+    # EventMachine::Connection#proxy_target_unbound is called by the reactor after attempting
+    # to relay incoming data to a descriptor (set as a proxy target descriptor with
+    # EventMachine::enable_proxy) that has already been closed.
+    def proxy_target_unbound
+    end
+
+    # EventMachine::Connection#proxy_completed is called when the reactor finished proxying all
+    # of the requested bytes.
+    def proxy_completed
+    end
+
+    # EventMachine::Connection#proxy_incoming_to is called only by user code. It sets up
+    # a low-level proxy relay for all data inbound for this connection, to the connection given
+    # as the argument. This is essentially just a helper method for enable_proxy.
+    # See EventMachine::enable_proxy documentation for details.
+    def proxy_incoming_to(conn,bufsize=0)
+      EventMachine::enable_proxy(self, conn, bufsize)
+    end
+
+    # Helper method for EventMachine::disable_proxy(self)
+    def stop_proxying
+      EventMachine::disable_proxy(self)
+    end
+
+    # EventMachine::Connection#close_connection is called only by user code, and never
+    # by the event loop. You may call this method against a connection object in any
+    # callback handler, whether or not the callback was made against the connection
+    # you want to close. close_connection <i>schedules</i> the connection to be closed
+    # at the next available opportunity within the event loop. You may not assume that
+    # the connection is closed when close_connection returns. In particular, the framework
+    # will callback the unbind method for the particular connection at a point shortly
+    # after you call close_connection. You may assume that the unbind callback will
+    # take place sometime after your call to close_connection completes. In other words,
+    # the unbind callback will not re-enter your code "inside" of your call to close_connection.
+    # However, it's not guaranteed that a future version of EventMachine will not change
+    # this behavior.
+    #
+    # close_connection will <i>silently discard</i> any outbound data which you have
+    # sent to the connection using EventMachine::Connection#send_data but which has not
+    # yet been sent across the network. If you want to avoid this behavior, use
+    # EventMachine::Connection#close_connection_after_writing.
+    #
+    def close_connection after_writing = false
+      EventMachine::close_connection @signature, after_writing
+    end
+
+    # EventMachine::Connection#detach will remove the given connection from the event loop.
+    # The connection's socket remains open and its file descriptor number is returned
+    def detach
+      EventMachine::detach_fd @signature
+    end
+
+    def get_sock_opt level, option
+      EventMachine::get_sock_opt @signature, level, option
+    end
+
+    # EventMachine::Connection#close_connection_after_writing is a variant of close_connection.
+    # All of the descriptive comments given for close_connection also apply to
+    # close_connection_after_writing, <i>with one exception:</i> If the connection has
+    # outbound data sent using send_dat but which has not yet been sent across the network,
+    # close_connection_after_writing will schedule the connection to be closed <i>after</i>
+    # all of the outbound data has been safely written to the remote peer.
+    #
+    # Depending on the amount of outgoing data and the speed of the network,
+    # considerable time may elapse between your call to close_connection_after_writing
+    # and the actual closing of the socket (at which time the unbind callback will be called
+    # by the event loop). During this time, you <i>may not</i> call send_data to transmit
+    # additional data (that is, the connection is closed for further writes). In very
+    # rare cases, you may experience a receive_data callback after your call to close_connection_after_writing,
+    # depending on whether incoming data was in the process of being received on the connection
+    # at the moment when you called close_connection_after_writing. Your protocol handler must
+    # be prepared to properly deal with such data (probably by ignoring it).
+    #
+    def close_connection_after_writing
+      close_connection true
+    end
+
+    # EventMachine::Connection#send_data is only called by user code, never by
+    # the event loop. You call this method to send data to the remote end of the
+    # network connection. send_data is called with a single String argument, which
+    # may of course contain binary data. You can call send_data any number of times.
+    # send_data is an instance method of an object derived from EventMachine::Connection
+    # and containing your mixed-in handler code), so if you call it without qualification
+    # within a callback function, the data will be sent to the same network connection
+    # that generated the callback. Calling self.send_data is exactly equivalent.
+    #
+    # You can also call send_data to write to a connection <i>other than the one
+    # whose callback you are calling send_data from.</i> This is done by recording
+    # the value of the connection in any callback function (the value self), in any
+    # variable visible to other callback invocations on the same or different
+    # connection objects. (Need an example to make that clear.)
+    #
+    def send_data data
+      data = data.to_s
+      size = data.bytesize if data.respond_to?(:bytesize)
+      size ||= data.size
+      EventMachine::send_data @signature, data, size
+    end
+
+    # Returns true if the connection is in an error state, false otherwise.
+    # In general, you can detect the occurrence of communication errors or unexpected
+    # disconnection by the remote peer by handing the #unbind method. In some cases, however,
+    # it's useful to check the status of the connection using #error? before attempting to send data.
+    # This function is synchronous: it will return immediately without blocking.
+    #
+    #
+    def error?
+      EventMachine::report_connection_error_status(@signature) != 0
+    end
+
+    # #connection_completed is called by the event loop when a remote TCP connection
+    # attempt completes successfully. You can expect to get this notification after calls
+    # to EventMachine#connect. Remember that EventMachine makes remote connections
+    # asynchronously, just as with any other kind of network event. #connection_completed
+    # is intended primarily to assist with network diagnostics. For normal protocol
+    # handling, use #post_init to perform initial work on a new connection (such as
+    # send an initial set of data).
+    # #post_init will always be called. #connection_completed will only be called in case
+    # of a successful completion. A connection-attempt which fails will receive a call
+    # to #unbind after the failure.
+    def connection_completed
+    end
+
+    # Call #start_tls at any point to initiate TLS encryption on connected streams.
+    # The method is smart enough to know whether it should perform a server-side
+    # or a client-side handshake. An appropriate place to call #start_tls is in
+    # your redefined #post_init method, or in the #connection_completed handler for
+    # an outbound connection.
+    #
+    # #start_tls takes an optional parameter hash that allows you to specify certificate
+    # and other options to be used with this Connection object. Here are the currently-supported
+    # options:
+    #
+    # * :cert_chain_file :
+    # takes a String, which is interpreted as the name of a readable file in the
+    # local filesystem. The file is expected to contain a chain of X509 certificates in
+    # PEM format, with the most-resolved certificate at the top of the file, successive
+    # intermediate certs in the middle, and the root (or CA) cert at the bottom.
+    #
+    # * :private_key_file :
+    # takes a String, which is interpreted as the name of a readable file in the
+    # local filesystem. The file must contain a private key in PEM format.
+    #
+    # * :verify_peer :
+    # takes either true or false. Default is false. This indicates whether a server should request a
+    # certificate from a peer, to be verified by user code. If true, the #ssl_verify_peer callback
+    # on the Connection object is called with each certificate in the certificate chain provided by
+    # the peer. See documentation on #ssl_verify_peer for how to use this.
+    #
+    # === Usage example:
+    #
+    #  require 'rubygems'
+    #  require 'eventmachine'
+    #
+    #  module Handler
+    #    def post_init
+    #      start_tls(:private_key_file => '/tmp/server.key', :cert_chain_file => '/tmp/server.crt', :verify_peer => false)
+    #    end
+    #  end
+    #
+    #  EM.run {
+    #    EM.start_server("127.0.0.1", 9999, Handler)
+    #  }
+    #
+    #--
+    # TODO: support passing an encryption parameter, which can be string or Proc, to get a passphrase
+    # for encrypted private keys.
+    # TODO: support passing key material via raw strings or Procs that return strings instead of
+    # just filenames.
+    # What will get nasty is whether we have to define a location for storing this stuff as files.
+    # In general, the OpenSSL interfaces for dealing with certs and keys in files are much better
+    # behaved than the ones for raw chunks of memory.
+    #
+    def start_tls args={}
+      priv_key, cert_chain, verify_peer = args.values_at(:private_key_file, :cert_chain_file, :verify_peer)
+
+      [priv_key, cert_chain].each do |file|
+        next if file.nil? or file.empty?
+        raise FileNotFoundException,
+          "Could not find #{file} for start_tls" unless File.exists? file
+      end
+
+      EventMachine::set_tls_parms(@signature, priv_key || '', cert_chain || '', verify_peer)
+      EventMachine::start_tls @signature
+    end
+
+    # If SSL/TLS is active on the connection, #get_peer_cert returns the remote X509 certificate
+    # as a String, in the popular PEM format. This can then be used for arbitrary validation
+    # of a peer's certificate in your code.
+    #
+    # This should be called in/after the #ssl_handshake_completed callback, which indicates
+    # that SSL/TLS is active. Using this callback is important, because the certificate may not
+    # be available until the time it is executed. Using #post_init or #connection_completed is
+    # not adequate, because the SSL handshake may still be taking place.
+    #
+    # #get_peer_cert will return <b>nil</b> if:
+    #
+    # * EventMachine is not built with OpenSSL support
+    # * SSL/TLS is not active on the connection
+    # * SSL/TLS handshake is not yet complete
+    # * Remote peer for any other reason has not presented a certificate
+    #
+    # === Example:
+    #
+    #  module Handler
+    #
+    #   def post_init
+    #     puts "Starting TLS"
+    #     start_tls
+    #   end
+    #
+    #   def ssl_handshake_completed
+    #     puts get_peer_cert
+    #     close_connection
+    #   end
+    #
+    #   def unbind
+    #     EventMachine::stop_event_loop
+    #   end
+    #
+    #  end
+    #
+    #  EM.run {
+    #   EventMachine::connect "mail.google.com", 443, Handler
+    #  }
+    #
+    # Output:
+    #  -----BEGIN CERTIFICATE-----
+    #  MIIDIjCCAougAwIBAgIQbldpChBPqv+BdPg4iwgN8TANBgkqhkiG9w0BAQUFADBM
+    #  MQswCQYDVQQGEwJaQTElMCMGA1UEChMcVGhhd3RlIENvbnN1bHRpbmcgKFB0eSkg
+    #  THRkLjEWMBQGA1UEAxMNVGhhd3RlIFNHQyBDQTAeFw0wODA1MDIxNjMyNTRaFw0w
+    #  OTA1MDIxNjMyNTRaMGkxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpDYWxpZm9ybmlh
+    #  MRYwFAYDVQQHEw1Nb3VudGFpbiBWaWV3MRMwEQYDVQQKEwpHb29nbGUgSW5jMRgw
+    #  FgYDVQQDEw9tYWlsLmdvb2dsZS5jb20wgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJ
+    #  AoGBALlkxdh2QXegdElukCSOV2+8PKiONIS+8Tu9K7MQsYpqtLNC860zwOPQ2NLI
+    #  3Zp4jwuXVTrtzGuiqf5Jioh35Ig3CqDXtLyZoypjZUQcq4mlLzHlhIQ4EhSjDmA7
+    #  Ffw9y3ckSOQgdBQWNLbquHh9AbEUjmhkrYxIqKXeCnRKhv6nAgMBAAGjgecwgeQw
+    #  KAYDVR0lBCEwHwYIKwYBBQUHAwEGCCsGAQUFBwMCBglghkgBhvhCBAEwNgYDVR0f
+    #  BC8wLTAroCmgJ4YlaHR0cDovL2NybC50aGF3dGUuY29tL1RoYXd0ZVNHQ0NBLmNy
+    #  bDByBggrBgEFBQcBAQRmMGQwIgYIKwYBBQUHMAGGFmh0dHA6Ly9vY3NwLnRoYXd0
+    #  ZS5jb20wPgYIKwYBBQUHMAKGMmh0dHA6Ly93d3cudGhhd3RlLmNvbS9yZXBvc2l0
+    #  b3J5L1RoYXd0ZV9TR0NfQ0EuY3J0MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcNAQEF
+    #  BQADgYEAsRwpLg1dgCR1gYDK185MFGukXMeQFUvhGqF8eT/CjpdvezyKVuz84gSu
+    #  6ccMXgcPQZGQN/F4Xug+Q01eccJjRSVfdvR5qwpqCj+6BFl5oiKDBsveSkrmL5dz
+    #  s2bn7TdTSYKcLeBkjXxDLHGBqLJ6TNCJ3c4/cbbG5JhGvoema94=
+    #  -----END CERTIFICATE-----
+    #
+    # You can do whatever you want with the certificate String, such as load it
+    # as a certificate object using the OpenSSL library, and check it's fields.
+    def get_peer_cert
+      EventMachine::get_peer_cert @signature
+    end
+
+
+    # send_datagram is for sending UDP messages.
+    # This method may be called from any Connection object that refers
+    # to an open datagram socket (see EventMachine#open_datagram_socket).
+    # The method sends a UDP (datagram) packet containing the data you specify,
+    # to a remote peer specified by the IP address and port that you give
+    # as parameters to the method.
+    # Observe that you may send a zero-length packet (empty string).
+    # However, you may not send an arbitrarily-large data packet because
+    # your operating system will enforce a platform-specific limit on
+    # the size of the outbound packet. (Your kernel
+    # will respond in a platform-specific way if you send an overlarge
+    # packet: some will send a truncated packet, some will complain, and
+    # some will silently drop your request).
+    # On LANs, it's usually OK to send datagrams up to about 4000 bytes in length,
+    # but to be really safe, send messages smaller than the Ethernet-packet
+    # size (typically about 1400 bytes). Some very restrictive WANs
+    # will either drop or truncate packets larger than about 500 bytes.
+    #--
+    # Added the Integer wrapper around the port parameter per suggestion by
+    # Matthieu Riou, after he passed a String and spent hours tearing his hair out.
+    #
+    def send_datagram data, recipient_address, recipient_port
+      data = data.to_s
+      EventMachine::send_datagram @signature, data, data.length, recipient_address, Integer(recipient_port)
+    end
+
+
+    # #get_peername is used with stream-connections to obtain the identity
+    # of the remotely-connected peer. If a peername is available, this method
+    # returns a sockaddr structure. The method returns nil if no peername is available.
+    # You can use Socket.unpack_sockaddr_in and its variants to obtain the
+    # values contained in the peername structure returned from #get_peername.
+    #
+    #  require 'socket'
+    #  module Handler
+    #    def receive_data data
+    #      port, ip = Socket.unpack_sockaddr_in(get_peername)
+    #      puts "got #{data.inspect} from #{ip}:#{port}"
+    #    end
+    #  end
+    def get_peername
+      EventMachine::get_peername @signature
+    end
+
+    # #get_sockname is used with stream-connections to obtain the identity
+    # of the local side of the connection. If a local name is available, this method
+    # returns a sockaddr structure. The method returns nil if no local name is available.
+    # You can use Socket#unpack_sockaddr_in and its variants to obtain the
+    # values contained in the local-name structure returned from #get_sockname.
+    def get_sockname
+      EventMachine::get_sockname @signature
+    end
+
+    # Returns the PID (kernel process identifier) of a subprocess
+    # associated with this Connection object. For use with EventMachine#popen
+    # and similar methods. Returns nil when there is no meaningful subprocess.
+    #--
+    #
+    def get_pid
+      EventMachine::get_subprocess_pid @signature
+    end
+
+    # Returns a subprocess exit status. Only useful for #popen. Call it in your
+    # #unbind handler.
+    #
+    def get_status
+      EventMachine::get_subprocess_status @signature
+    end
+
+    # comm_inactivity_timeout returns the current value (float in seconds) of the inactivity-timeout
+    # property of network-connection and datagram-socket objects. A nonzero value
+    # indicates that the connection or socket will automatically be closed if no read or write
+    # activity takes place for at least that number of seconds.
+    # A zero value (the default) specifies that no automatic timeout will take place.
+    def comm_inactivity_timeout
+      EventMachine::get_comm_inactivity_timeout @signature
+    end
+
+    # Alias for #set_comm_inactivity_timeout.
+    def comm_inactivity_timeout= value
+      self.set_comm_inactivity_timeout value
+    end
+
+    # comm_inactivity_timeout= allows you to set the inactivity-timeout property for
+    # a network connection or datagram socket. Specify a non-negative float value in seconds.
+    # If the value is greater than zero, the connection or socket will automatically be closed
+    # if no read or write activity takes place for at least that number of seconds.
+    # Specify a value of zero to indicate that no automatic timeout should take place.
+    # Zero is the default value.
+    def set_comm_inactivity_timeout value
+      EventMachine::set_comm_inactivity_timeout @signature, value.to_f
+    end
+
+    # pending_connect_timeout is the duration after which a TCP connection in the connecting 
+    # state will fail. It is important to distinguish this value from comm_inactivity_timeout,
+    # which looks at how long since data was passed on an already established connection.
+    # The value is a float in seconds.
+    def pending_connect_timeout
+      EventMachine::get_pending_connect_timeout @signature
+    end
+
+    # Alias for #set_pending_connect_timeout.
+    def pending_connect_timeout= value
+      self.set_pending_connect_timeout value
+    end
+
+    # set_pending_connect_timeout sets the duration after which a TCP connection in a
+    # connecting state will fail. Takes a float in seconds.
+    def set_pending_connect_timeout value
+      EventMachine::set_pending_connect_timeout @signature, value.to_f
+    end
+
+    # Reconnect to a given host/port with the current EventMachine::Connection instance
+    def reconnect server, port
+      EventMachine::reconnect server, port, self
+    end
+
+
+    # Like EventMachine::Connection#send_data, this sends data to the remote end of
+    # the network connection.  EventMachine::Connection@send_file_data takes a
+    # filename as an argument, though, and sends the contents of the file, in one
+    # chunk. Contributed by Kirk Haines.
+    #
+    def send_file_data filename
+      EventMachine::send_file_data @signature, filename
+    end
+
+    # Open a file on the filesystem and send it to the remote peer. This returns an
+    # object of type EventMachine::Deferrable. The object's callbacks will be executed
+    # on the reactor main thread when the file has been completely scheduled for
+    # transmission to the remote peer. Its errbacks will be called in case of an error
+    # (such as file-not-found). #stream_file_data employs various strategems to achieve
+    # the fastest possible performance, balanced against minimum consumption of memory.
+    #
+    # You can control the behavior of #stream_file_data with the optional arguments parameter.
+    # Currently-supported arguments are:
+    # :http_chunks, a boolean flag which defaults false. If true, this flag streams the
+    # file data in a format compatible with the HTTP chunked-transfer encoding.
+    #
+    # Warning: this feature has an implicit dependency on an outboard extension,
+    # evma_fastfilereader. You must install this extension in order to use #stream_file_data
+    # with files larger than a certain size (currently 8192 bytes).
+    #
+    def stream_file_data filename, args={}
+      EventMachine::FileStreamer.new( self, filename, args )
+    end
+
+    # Enable notify_readable callbacks on this connection. Only possible if the connection was created
+    # using EM.attach and had notify_readable/notify_writable defined on the handler.
+    def notify_readable= mode
+      EventMachine::set_notify_readable @signature, mode
+    end
+
+    # Returns true if the connection is being watched for readability.
+    def notify_readable?
+      EventMachine::is_notify_readable @signature
+    end
+
+    # Enable notify_writable callbacks on this connection. Only possible if the connection was created
+    # using EM.attach and had notify_readable/notify_writable defined on the handler.
+    def notify_writable= mode
+      EventMachine::set_notify_writable @signature, mode
+    end
+
+    # Returns true if the connection is being watched for writability.
+    def notify_writable?
+      EventMachine::is_notify_writable @signature
+    end
+
+    # Pause a connection so that #send_data and #receive_data events are not fired until #resume is called.
+    def pause
+      EventMachine::pause_connection @signature
+    end
+
+    # Resume a connection's #send_data and #receive_data events.
+    def resume
+      EventMachine::resume_connection @signature
+    end
+
+    # True if the connect was paused using #pause.
+    def paused?
+      EventMachine::connection_paused? @signature
+    end
+  end
+end