erbook 7.0.0 → 7.1.0

data/lang/pt.yaml

@@ -1,32 +1,43 @@
 # pt (Portuguese)
+About: Sobre
+Abstract: Sumário
 Caution: Cuidado
 Cautions: Cuidados
 Chapter: Capítulo
 Contents: Índices
+Document: Original
 Equation: Equação
 Equations: Equações
 Example: Exemplo
 Examples: Exemplos
+Failed!: Falhado!
 Figure: Figura
 Figures: Figuras
 Focus next segment: Segmento seguinte do foco
 Focus previous segment: Segmento precedente do foco
 Focus this segment: Focalize este segmento
-Generated by %s on %s.: Gerado por %s em %s.
 Important: Importante
 Importants: Importants
+Index: Índice
+License: Licença
+Loading...: Carregamento…
 Note: Nota
 Notes: Notas
+Origin: Origem
 Part: Parte
+Please enable JavaScript in your Web browser.: Permita por favor o Javascript em seu web browser.
+Printer friendly: Impressora amigável
 Procedure: Procedimento
 Procedures: Procedimentos
+Ready!: Pronto!
 Reference: Referência
 References: Referências
+Resource: Recurso
 Return to listing: Retorne à lista
 Section: Seção
 Table: Tabela
 Tables: Tabelas
-The icons shown above are part of %s, which is copyright %s and is distributed under %s.: Os ícones mostrados acima são parte de %s, que é os direitos reservados %s e é distribuído sob %s.
+This document was generated by %s on %s using the following resources.: Este original foi gerado por %s em %s usando os seguintes recursos.
 Tip: Ponta
 Tips: Pontas
 Warning: Aviso

data/lang/ru.yaml

@@ -1,32 +1,43 @@
 # ru (Russian)
+About: О
+Abstract: Конспект
 Caution: Предосторежение
 Cautions: Предосторежения
 Chapter: Глава
 Contents: Содержание
+Document: Документ
 Equation: Уровнение
 Equations: Уровнения
 Example: Пример
 Examples: Примеры
+Failed!: Неудачно!
 Figure: Диаграмма
 Figures: Диаграммы
 Focus next segment: Этап фокуса следующий
 Focus previous segment: Этап фокуса предыдущий
 Focus this segment: Сфокусируйте этот этап
-Generated by %s on %s.: Произведено %s на %s.
 Important: Важно
 Importants: Importants
+Index: Индекс
+License: Лицензия
+Loading...: Нагрузка…
 Note: Примечание
 Notes: Примечания
+Origin: Начало
 Part: Часть
+Please enable JavaScript in your Web browser.: Пожалуйста включите яваскрипт в вашем браузере паутины.
+Printer friendly: Принтер содружественный
 Procedure: Процедура
 Procedures: Процедуры
+Ready!: Готово!
 Reference: Справка
 References: Справки
+Resource: Ресурс
 Return to listing: Возвратите к перечислению
 Section: Раздел
 Table: Таблица
 Tables: Таблицы
-The icons shown above are part of %s, which is copyright %s and is distributed under %s.: Иконы показанные выше часть %s, которое авторское право %s и распределено под %s.
+This document was generated by %s on %s using the following resources.: Этот документ был произведен %s на %s используя следующие ресурсы.
 Tip: Подсказка
 Tips: Подсказки
 Warning: Предупреждение

data/lang/zh.yaml

@@ -1,32 +1,43 @@
 # zh (Chinese-simp)
+About: 关于
+Abstract: 摘要
 Caution: 小心
 Cautions: 小心
 Chapter: 章节
 Contents: 内容
+Document: 文件
 Equation: 等式
 Equations: 等式
 Example: 例子
 Examples: 例子
+Failed!: 不合格!
 Figure: 图
 Figures: 图
 Focus next segment: 焦点下段
 Focus previous segment: 焦点早先段
 Focus this segment: 聚焦这段
-Generated by %s on %s.: 引起由%s在%s。
 Important: 重要
 Importants: Importants
+Index: 索引
+License: 执照
+Loading...: 装货…
 Note: 笔记
 Notes: 笔记
+Origin: 起源
 Part: 部分
+Please enable JavaScript in your Web browser.: 请使能在您的浏览器的Java语言。
+Printer friendly: 友好的打印机
 Procedure: 做法
 Procedures: 做法
+Ready!: 准备好!
 Reference: 参考
 References: 参考
+Resource: 资源
 Return to listing: 回到目录
 Section: 部分
 Table: 表
 Tables: 表
-The icons shown above are part of %s, which is copyright %s and is distributed under %s.: 显示的象以上是%s的一部分，是版权%s和被分布在%s.之下。
+This document was generated by %s on %s using the following resources.: 使用以下资源，本文是由%s引起的在%s。
 Tip: 技巧
 Tips: 技巧
 Warning: 警告

data/lang/zt.yaml

@@ -1,32 +1,43 @@
 # zt (Chinese-trad)
+About: 關於
+Abstract: 摘要
 Caution: 小心
 Cautions: 小心
 Chapter: 章節
 Contents: 内容
+Document: 文件
 Equation: 等式
 Equations: 等式
 Example: 例子
 Examples: 例子
+Failed!: 不合格!
 Figure: 图
 Figures: 图
 Focus next segment: 焦點下段
 Focus previous segment: 焦點早先段
 Focus this segment: 聚焦這段
-Generated by %s on %s.: 引起由%s在%s。
 Important: 重要
 Importants: Importants
+Index: 索引
+License: 執照
+Loading...: 裝貨…
 Note: 筆記
 Notes: 筆記
+Origin: 起源
 Part: 部分
+Please enable JavaScript in your Web browser.: 請使能在您的瀏覽器的Java語言。
+Printer friendly: 友好的打印機
 Procedure: 做法
 Procedures: 做法
+Ready!: 準備好!
 Reference: 參考
 References: 參考
+Resource: 資源
 Return to listing: 回到目錄
 Section: 部分
 Table: 表
 Tables: 表
-The icons shown above are part of %s, which is copyright %s and is distributed under %s.: 顯示的像以上是%s的一部分，是版權%s和被分佈在%s.之下。
+This document was generated by %s on %s using the following resources.: 使用以下资源，本文是由%s引起的在%s。
 Tip: 技巧
 Tips: 技巧
 Warning: 警告

data/lib/erbook.rb

@@ -1,6 +1,6 @@
 #--
-# Copyright 2007 Suraj N. Kurapati
-# See the LICENSE file for details.
+# Copyright protects this work.
+# See LICENSE file for details.
 #++
 
 require 'rubygems'
@@ -9,15 +9,17 @@ require 'inochi'
 
 Inochi.init :ERBook,
   :program => 'erbook',
-  :version => '7.0.0',
-  :release => '2009-05-03',
+  :version => '7.1.0',
+  :release => '2009-08-30',
   :website => 'http://snk.tuxfamily.org/lib/erbook/',
   :tagline => 'Extensible document processor based on eRuby',
   :require => {
-    'ember'     => '~> 0',   # for eRuby template processing
-    'maruku'    => '~> 0.5', # for Markdown to XHTML conversion
-    'coderay'   => '>= 0.8', # for syntax coloring of source code
-    'rainpress' => '~> 1',   # for minifying CSS
+    'ember'      => '~> 0',     # for eRuby template processing
+    'maruku'     => '~> 0.5',   # for Markdown to XHTML conversion
+    'coderay'    => '>= 0.8',   # for syntax coloring of source code
+    'rainpress'  => '~> 1',     # for minifying CSS
+    'haml'       => '>= 2.2.2', # for generating HTML and CSS
+    'mime-types' => '>= 1.16',  # for detecting MIME types
   }
 
 module ERBook

data/lib/erbook/document.rb

@@ -1,6 +1,6 @@
 #--
-# Copyright 2008 Suraj N. Kurapati
-# See the LICENSE file for details.
+# Copyright protects this work.
+# See LICENSE file for details.
 #++
 
 require 'yaml'
@@ -41,7 +41,7 @@ module ERBook
     #
     def initialize format_name, input_text, input_file, options = {}
       # process format specification
-      @format_file = format_name.to_s
+        @format_file = format_name.to_s
 
         File.file? @format_file or
           @format_file = File.join(ERBook::FORMATS_DIR, @format_file + '.yaml')
@@ -62,160 +62,163 @@ module ERBook
         @node_defs = @format['nodes']
 
       # process input document
-        begin
-          # create sandbox for input evaluation
-            template = Template.new(input_file, input_text, options[:unindent])
-            sandbox = template.sandbox
-
-            @template_vars = {
-              :@format        => @format,
-              :@roots         => @roots = [], # root nodes of all trees
-              :@nodes         => @nodes = [], # all nodes in the forest
-              :@nodes_by_type => @nodes_by_type = Hash.new {|h,k| h[k] = [] },
-              :@stack         => [], # stack for all nodes
-            }.each_pair {|k,v| sandbox.instance_variable_set(k, v) }
-
-            # Handles the method call from a node
-            # placeholder in the input document.
-            def sandbox.__node_impl__ node_type, *node_args, &node_content
-              node = Node.new(
-                :type => node_type,
-                :defn => @format['nodes'][node_type],
-                :args => node_args,
-                :children => [],
-
-                # omit erbook internals from the stack trace
-                :trace => caller.reject {|t|
-                  [$0, ERBook::INSTALL].any? {|f| t.index(f) == 0 }
-                }
-              )
-              @nodes << node
-              @nodes_by_type[node.type] << node
-
-              # calculate occurrence number for this node
-              if node.defn['number']
-                @count ||= Hash.new {|h,k| h[k] = []}
-                node.number = (@count[node.type] << node).length
-              end
+      begin
+        # create sandbox for input evaluation
+          template = Template.new(input_file, input_text, options[:unindent])
+          sandbox = template.sandbox
+
+          @template_vars = {
+            :@format        => @format,
+            :@roots         => @roots = [], # root nodes of all trees
+            :@nodes         => @nodes = [], # all nodes in the forest
+            :@nodes_by_type => @nodes_by_type = Hash.new {|h,k| h[k] = [] },
+            :@stack         => [], # stack for all nodes
+          }.each_pair {|k,v| sandbox.instance_variable_set(k, v) }
+
+          ##
+          # Handles the method call from a node
+          # placeholder in the input document.
+          #
+          def sandbox.__node_impl__ node_type, *node_args, &node_content
+            node = Node.new(
+              :type => node_type,
+              :defn => @format['nodes'][node_type],
+              :args => node_args,
+              :children => [],
+
+              # omit erbook internals from the stack trace
+              :trace => caller.reject {|t|
+                [$0, ERBook::INSTALL].any? {|f| t.index(f) == 0 }
+              }
+            )
+            @nodes << node
+            @nodes_by_type[node.type] << node
+
+            # calculate occurrence number for this node
+            if node.defn['number']
+              @count ||= Hash.new {|h,k| h[k] = []}
+              node.number = (@count[node.type] << node).length
+            end
 
-              # assign node family
-              if parent = @stack.last
-                parent.children << node
-                node.parent = parent
-                node.depth = parent.depth
-                node.depth += 1 if node.defn['depth']
+            # assign node family
+            if parent = @stack.last
+              parent.children << node
+              node.parent = parent
+              node.depth = parent.depth
+              node.depth += 1 if node.defn['depth']
 
-                # calculate latex-style index number for this node
-                if node.defn['index']
-                  ancestry = @stack.reverse.find {|n| n.defn['index'] }.index
-                  branches = node.parent.children.select {|n| n.index }
+              # calculate latex-style index number for this node
+              if node.defn['index']
+                ancestry = @stack.reverse.find {|n| n.defn['index'] }.index
+                branches = node.parent.children.select {|n| n.index }
 
-                  node.index = [ancestry, branches.length + 1].join('.')
-                end
-              else
-                @roots << node
-                node.parent = nil
-                node.depth = 0
-
-                # calculate latex-style index number for this node
-                if node.defn['index']
-                  branches = @roots.select {|n| n.index }
-                  node.index = (branches.length + 1).to_s
-                end
+                node.index = [ancestry, branches.length + 1].join('.')
               end
-
-              # assign node content
-              if block_given?
-                @stack.push node
-                node.content = __block_content__(node, &node_content)
-                @stack.pop
+            else
+              @roots << node
+              node.parent = nil
+              node.depth = 0
+
+              # calculate latex-style index number for this node
+              if node.defn['index']
+                branches = @roots.select {|n| n.index }
+                node.index = (branches.length + 1).to_s
               end
-
-              @buffer << node
-
-              nil
             end
 
-            @node_defs.each_key do |type|
-              # XXX: using a string because define_method()
-              #      does not accept a block until Ruby 1.9
-              file, line = __FILE__, __LINE__; eval %{
-                def sandbox.#{type} *node_args, &node_content
-                  __node_impl__ #{type.inspect}, *node_args, &node_content
-                end
-              }, binding, file, line
+            # assign node content
+            if block_given?
+              @stack.push node
+              node.content = __block_content__(node, &node_content)
+              @stack.pop
             end
 
-          # evaluate the input & build the document tree
-            template.render
-            @processed_document = template.buffer
+            @buffer << node
 
-          # chain block-level nodes together for local navigation
-            block_nodes = @nodes.reject {|n| n.defn['bypass'] ||
-                                             n.defn['inline'] }
+            nil
+          end
 
-            require 'enumerator'
-            block_nodes.each_cons(2) do |a, b|
-              a.next_node = b
-              b.prev_node = a
-            end
+          @node_defs.each_key do |type|
+            # XXX: using a string because define_method()
+            #      does not accept a block until Ruby 1.9
+            file, line = __FILE__, __LINE__; eval %{
+              def sandbox.#{type} *node_args, &node_content
+                __node_impl__ #{type.inspect}, *node_args, &node_content
+              end
+            }, binding, file, line
+          end
 
-          # calculate output for all nodes
-            actual_output_by_node = {}
-
-            visitor = lambda do |n|
-              #
-              # allow child nodes to calculate their actual
-              # output and to set their identifier as Node#output
-              #
-              # we do this nodes first because this node's
-              # content contains the child nodes' output
-              #
-              n.children.each {|c| visitor.call c }
-
-              # calculate the output for this node
-              actual_output = Template.new(
-                "#{@format_file}:nodes:#{n.type}:output",
-                n.defn['output'].to_s.chomp
-              ).render_with(@template_vars.merge(:@node => n))
-
-              # reveal child nodes' actual output in this node's actual output
-              n.children.each do |c|
-                if c.defn['inline'] && !c.defn['bypass']
-                  actual_output[c.output] = actual_output_by_node[c]
-
-                else
-                  # pull block-level node out of paragraph tag added by Maruku
-                  actual_output.sub! %r/(<p>\s*)?#{Regexp.quote c.output}/ do
-                    actual_output_by_node[c] + $1.to_s
-                  end
+        # evaluate the input & build the document tree
+          template.render
+          @processed_document = template.buffer
+
+        # chain block-level nodes together for local navigation
+          block_nodes = @nodes.reject do |n|
+            n.defn['bypass'] || n.defn['inline']
+          end
+
+          require 'enumerator'
+          block_nodes.each_cons(2) do |a, b|
+            a.next_node = b
+            b.prev_node = a
+          end
+
+        # calculate output for all nodes
+          actual_output_by_node = {}
+
+          visitor = lambda do |n|
+            #
+            # allow child nodes to calculate their actual
+            # output and to set their identifier as Node#output
+            #
+            # we do this nodes first because this node's
+            # content contains the child nodes' output
+            #
+            n.children.each {|c| visitor.call c }
+
+            # calculate the output for this node
+            actual_output = Template.new(
+              "#{@format_file}:nodes:#{n.type}:output",
+              n.defn['output'].to_s.chomp
+            ).render_with(@template_vars.merge(:@node => n))
+
+            # reveal child nodes' actual output in this node's actual output
+            n.children.each do |c|
+              if c.defn['inline'] && !c.defn['bypass']
+                actual_output[c.output] = actual_output_by_node[c]
+
+              else
+                # pull block-level node out of paragraph tag added by Maruku
+                actual_output.sub! %r/(<p>\s*)?#{Regexp.quote c.output}/ do
+                  actual_output_by_node[c] + $1.to_s
                 end
               end
-
-              actual_output_by_node[n] = actual_output
-
-              #
-              # allow the parent node to calculate its actual
-              # output without interference from the output of
-              # this node (Node#to_s is aliased to Node#output)
-              #
-              # this assumes that having this node's string
-              # representation be a consecutive sequence of digits
-              # will not interfere with the text-to-whatever
-              # transformation defined by the format specification
-              #
-              n.output = Digest::SHA1.digest(n.object_id.to_s).unpack('I*').join
             end
 
-            @roots.each {|n| visitor.call n }
+            actual_output_by_node[n] = actual_output
+
+            #
+            # allow the parent node to calculate its actual
+            # output without interference from the output of
+            # this node (Node#to_s is aliased to Node#output)
+            #
+            # this assumes that having this node's string
+            # representation be a consecutive sequence of digits
+            # will not interfere with the text-to-whatever
+            # transformation defined by the format specification
+            #
+            n.output = Digest::SHA1.digest(n.object_id.to_s).unpack('I*').join
+          end
 
-            # replace the temporary identifier with each node's actual output
-            @nodes.each {|n| n.output = actual_output_by_node[n] }
+          @roots.each {|n| visitor.call n }
 
-        rescue Exception
-          puts input_text # so the user can debug line numbers in stack trace
-          error "Could not process input document #{input_file.inspect}"
-        end
+          # replace the temporary identifier with each node's actual output
+          @nodes.each {|n| n.output = actual_output_by_node[n] }
+
+      rescue Exception
+        puts input_text # so the user can debug line numbers in stack trace
+        error "Could not process input document #{input_file.inspect}"
+      end
     end
 
     ##
@@ -232,7 +235,9 @@ module ERBook
       undef id if respond_to? :id
       undef type if respond_to? :type
 
+      ##
       # Returns the output of this node.
+      #
       def to_s
         defn['silent'] ? '' : output
       end