epm 0.3.17 → 0.3.18

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: 4e1e6ce1cf6ce7c1e2477a04abb7902f1b0226c4
-  data.tar.gz: a81c1d9ddd9876fa660bd99501c391d267465793
+  metadata.gz: 7d6ece36be227fac02f3cef89eb81969bc1532a3
+  data.tar.gz: 53c289bc1205ed82d11ef83ac211a704290a78e8
 SHA512:
-  metadata.gz: 1277ddb28c617c014aabad4739000aabc0c73d1880078945d5aa834b5aa2797311067a9cb5078499f8286595184e4e0594c9ebd6ca87c7c69110e9746c3d1982
-  data.tar.gz: 1d6fd4a042076e217ff66f8585c52e4a21cbb2aef65670b3e3e2d4aa9c7561846bc916ec729de26759b5be932201a5bf23f7ee751fca55b915ce5a44fbaff776
+  metadata.gz: bb0d520d535d7f26fd8c2601aee8c3138dc0452d32dafe7ef8cb51318a28c3cb0d55093180331ab2bd466388333a210a171f0f631338457d681e91749c458684
+  data.tar.gz: c5b2731db71bc01b7f826fe1de224b5f11107ada59ab03a2cda93200ec6ad073da3f9b7fd23dc92146ebc0510f8ea8c36bf8a99795ca7add110d7aaca438b57e

data/README.md

@@ -68,7 +68,7 @@ EPM offers the following commands:
 * `epm stop` -- stops the default ethereum server.
 * `epm restart` -- restarts the default ethereum server.
 * `epm rpc` -- sends any of the rpc commands to the ethereum server. This is useful when developers need access to the rpc commands which are not wrapped and summarized below, or when developers need to use one of the commands below (primarily create and transact) but without the opinionated epm defaults (e.g., endowment of 0, and transact with 0).
-* `epm query` -- queries a storage location on the ethereum blockchain. Accepts two arguments, the first argument is the contract to be queried, and the second argument is the storage location to be queried.
+* `epm query` -- queries a storage location on the ethereum blockchain. Accepts two arguments, the first argument is the contract to be queried, and the second argument is the storage location to be queried. Note, for queries you **MUST** prefix the storage location with '0x'. The contract position need not be prefixed with 0x. The reason for this is that if the storage position is not prefixed with '0x' then `epm` will hex byte encode the string. This is to support namereg lookups. So `epm query 0x61363f0d19cfe71a5c130642016e37649610294b swarum` will query the contract address: 0x61363f0d19cfe71a5c130642016e37649610294b at the storage location 0x73776172756d0000000000000000000000000000000000000000000000000000 which is the hex byte encoding for the string 'swarum'.
 * `epm transact` -- sends a transaction to an ethereum contract. By definition this will be a 0 value call. The account sending the transaction will need ether, but only to provide the gas for the individual call. The first argument sent to the command line will be the recipient and the remaining arguments sent to the command line will be the data with each of the data slots separated by a space on the command line (or a new element in the array if calling programmatically). Arguments which are prefixed by `0x` will be treated as hex values and arguments which are not will be treated as strings. EPM will compile all of the arguments into a single RPC call which is correctly formated for all of the clients.
 * `epm compile` -- compiles a contract and returns the byte code array for that contract to the command line (or if called programmatically to the calling program).
 * `epm create` -- compiles a contract and sends to the ethereum blockchain. Create is used only for single contracts rather than packages of contracts. Use epm deploy to send packages of contracts to the blockchain.
@@ -93,6 +93,8 @@ transact:
   {{DOUG}} => "register" "rep" {{rep}} "" "" "" "" ""
 query:
   {{DOUG}} => 0x18 => {{DOUG_LIKES_YOU}}
+endow:
+  {{DOUG}} => 10000000
 ```
 
 Each line which does not begin with whitespace is read as a command sequence. The remainder of the lines relevant to that command must begin with whitespace (tabs or spaces do not matter). Lines which are blank or begin with a `#` will not be parsed.
@@ -148,6 +150,13 @@ The set command is used to set key:val pairs for substitution later. Key params:
 1. key
 2. val
 
+## Endowment Command
+
+The endowment command is used to endow a contract. Endow params:
+
+1. contract to endow
+2. value of endowment
+
 # Tips && Usage
 
 If you want to use AlethZero, that is fine but you will also have to use `eth` headless because AlethZero does not currently have RPC capabilities. I run eth in a second directory listening on a second port with a peer server of AlethZero and it works just fine. Such a set up allows devs to see what is happening in AlethZero (as long as both headless and Aleth connect to the same peer server) but gain the RPC capabilities the package needs.

data/bin/epm

@@ -17,7 +17,7 @@ command :compile do |c|
   c.description = 'Compile an ethereum contract and return the byte code array. Compile does not send to the blockchain, it only returns the byte code array.'
   c.action do |args|
     result = EPM.compile(args)
-    result.each{|l| print l + "\n"}
+    result.each{|l| print l; print "\n"}
   end
 end
 
@@ -29,7 +29,7 @@ command :create do |c|
   c.description = 'Compile an ethereum contract and deploy to the blockchain. Create is used only for single contracts rather than packages of contracts. Use epm deploy to send packages of contracts to the blockchain.'
   c.action do |args|
     result = EPM.create(args)
-    result.each{|l| print l + "\n"}
+    result.each{|l| print l; print "\n"}
   end
 end
 
@@ -66,7 +66,8 @@ command :query do |c|
   # description is deplayed on subcommand --help
   c.description = 'Query a storage position of a contract currently on the blockchain. Accepts two arguments, the first argument is the contract to be queried, and the second argument is the storage location to be queried.'
   c.action do |args|
-    print EPM.query(args) + "\n"
+    print EPM.query(args)
+	  print	"\n"
   end
 end
 
@@ -126,4 +127,4 @@ command :setup do |c|
   c.action do
     EPM::Settings.check
   end
-end
+end

data/lib/epm/query.rb

@@ -6,7 +6,7 @@ module EPM
       @uri      = URI.parse "http://localhost:#{settings['json-port']}"
       setup settings
       @address  = EPM::HexData.hex_guard address
-      @position = EPM::HexData.hex_guard position
+      @position = EPM::HexData.query_guard position
     end
 
     def query

data/lib/epm/utils.rb

@@ -40,7 +40,7 @@ module EPM
     end
 
     def eth_processes
-     a = `ps ux`.split("\n").select{|e| e[/eth --json-rpc-port/]}
+     a = `ps ux`.split("\n").select{|e| e[/eth.* --json-rpc-port/]}
      # a << `ps ux`.split("\n").select{|e| e[/ethereum/]}
      a << `ps ux`.split("\n").select{|e| e[/ethereal/]}
      a = a.flatten
@@ -123,6 +123,13 @@ module EPM
       return data
     end
 
+    def query_guard position
+      if position[0..1] != '0x'
+        position = construct_data( [ position ] )
+      end
+      return position
+    end
+
     def construct_data deconstructed_data
       data = "0x"
       deconstructed_data.each do |bits|
@@ -167,4 +174,4 @@ module EPM
       return tmp.path
     end
   end
-end
+end

data/lib/epm/version.rb

@@ -1 +1 @@
-VERSION ||= "0.3.17"
+VERSION ||= "0.3.18"

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: epm
 version: !ruby/object:Gem::Version
-  version: 0.3.17
+  version: 0.3.18
 platform: ruby
 authors:
 - Casey Kuhlman
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2014-07-07 00:00:00.000000000 Z
+date: 2014-07-08 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: commander