enju_ndl 0.3.1 → 0.3.2

data/spec/dummy/solr/configsets/sunspot/conf/protwords.txt

@@ -1,21 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#-----------------------------------------------------------------------
-# Use a protected word file to protect against the stemmer reducing two
-# unrelated words to the same base word.
-
-# Some non-words that normally won't be encountered,
-# just to test that they won't be stemmed.
-dontstems
-zwhacky
-

data/spec/dummy/solr/configsets/sunspot/conf/schema.xml

@@ -1,278 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<!--  
- This is the Solr schema file. This file should be named "schema.xml" and
- should be in the conf directory under the solr home
- (i.e. ./solr/conf/schema.xml by default) 
- or located where the classloader for the Solr webapp can find it.
-
- This example schema is the recommended starting point for users.
- It should be kept correct and concise, usable out-of-the-box.
-
- For more information, on how to customize this file, please see
- http://wiki.apache.org/solr/SchemaXml
-
- PERFORMANCE NOTE: this schema includes many optional features and should not
- be used for benchmarking.  To improve performance one could
-  - set stored="false" for all fields possible (esp large fields) when you
-    only need to search on the field but don't need to return the original
-    value.
-  - set indexed="false" if you don't need to search on the field, but only
-    return the field as a result of searching on other indexed fields.
-  - remove all unneeded copyField statements
-  - for best index size and searching performance, set "index" to false
-    for all general text fields, use copyField to copy them to the
-    catchall "text" field, and use that for searching.
-  - For maximum indexing performance, use the StreamingUpdateSolrServer
-    java client.
-  - Remember to run the JVM in server mode, and use a higher logging level
-    that avoids logging every request
--->
-<schema name="sunspot" version="1.0">
-  <types>
-    <!-- field type definitions. The "name" attribute is
-       just a label to be used by field definitions.  The "class"
-       attribute and any other attributes determine the real
-       behavior of the fieldType.
-         Class names starting with "solr" refer to java classes in the
-       org.apache.solr.analysis package.
-    -->
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="string" class="solr.StrField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tdouble" class="solr.TrieDoubleField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="rand" class="solr.RandomSortField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="text" class="solr.TextField" omitNorms="false">
-      <analyzer>
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.StandardFilterFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.PorterStemFilterFactory"/>
-      </analyzer>
-    </fieldType>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="boolean" class="solr.BoolField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tint" class="solr.TrieIntField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tlong" class="solr.TrieLongField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tfloat" class="solr.TrieFloatField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tdate" class="solr.TrieDateField"
-               omitNorms="true"/>
-
-    <fieldType name="daterange" class="solr.DateRangeField" omitNorms="true" />
-
-    <!-- Special field type for spell correction. Be careful about
-         adding filters here, as they apply *before* your values go in
-         the spellcheck. For example, the lowercase filter here means
-         all spelling suggestions will be lower case (without it,
-         though, you'd have duplicate suggestions for lower and proper
-         cased words). -->
-    <fieldType name="textSpell" class="solr.TextField" positionIncrementGap="100" omitNorms="true">
-      <analyzer>
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.StandardFilterFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-    </fieldType>
-    <!-- A specialized field for geospatial search. If indexed, this fieldType must not be multivalued. -->
-    <fieldType name="location" class="solr.LatLonType" subFieldSuffix="_coordinate"/>
-  </types>
-  <fields>
-    <!-- Valid attributes for fields:
-     name: mandatory - the name for the field
-     type: mandatory - the name of a previously defined type from the
-       <types> section
-     indexed: true if this field should be indexed (searchable or sortable)
-     stored: true if this field should be retrievable
-     compressed: [false] if this field should be stored using gzip compression
-       (this will only apply if the field type is compressable; among
-       the standard field types, only TextField and StrField are)
-     multiValued: true if this field may contain multiple values per document
-     omitNorms: (expert) set to true to omit the norms associated with
-       this field (this disables length normalization and index-time
-       boosting for the field, and saves some memory).  Only full-text
-       fields or fields that need an index-time boost need norms.
-     termVectors: [false] set to true to store the term vector for a
-       given field.
-       When using MoreLikeThis, fields used for similarity should be
-       stored for best performance.
-     termPositions: Store position information with the term vector.
-       This will increase storage costs.
-     termOffsets: Store offset information with the term vector. This
-       will increase storage costs.
-     default: a value that should be used if no value is specified
-       when adding a document.
-   -->
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="id" stored="true" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="type" stored="false" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="class_name" stored="false" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="text" stored="false" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="lat" stored="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="lng" stored="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="random_*" stored="false" type="rand" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="_local*" stored="false" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_text" stored="false" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_texts" stored="true" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_b" stored="false" type="boolean" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_bm" stored="false" type="boolean" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_bs" stored="true" type="boolean" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_bms" stored="true" type="boolean" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_d" stored="false" type="tdate" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dm" stored="false" type="tdate" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ds" stored="true" type="tdate" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dms" stored="true" type="tdate" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_e" stored="false" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_em" stored="false" type="tdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_es" stored="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ems" stored="true" type="tdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_f" stored="false" type="tfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fm" stored="false" type="tfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fs" stored="true" type="tfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fms" stored="true" type="tfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_i" stored="false" type="tint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_im" stored="false" type="tint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_is" stored="true" type="tint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ims" stored="true" type="tint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_l" stored="false" type="tlong" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_lm" stored="false" type="tlong" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ls" stored="true" type="tlong" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_lms" stored="true" type="tlong" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_s" stored="false" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_sm" stored="false" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ss" stored="true" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_sms" stored="true" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_it" stored="false" type="tint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_itm" stored="false" type="tint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_its" stored="true" type="tint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_itms" stored="true" type="tint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ft" stored="false" type="tfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ftm" stored="false" type="tfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fts" stored="true" type="tfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ftms" stored="true" type="tfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dt" stored="false" type="tdate" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dtm" stored="false" type="tdate" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dts" stored="true" type="tdate" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dtms" stored="true" type="tdate" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_textv" stored="false" termVectors="true" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_textsv" stored="true" termVectors="true" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_et" stored="false" termVectors="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_etm" stored="false" termVectors="true" type="tdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ets" stored="true" termVectors="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_etms" stored="true" termVectors="true" type="tdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dr" stored="false" type="daterange" multiValued="false" indexed="true" />
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_drm" stored="false" type="daterange" multiValued="true" indexed="true" />
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_drs" stored="true" type="daterange" multiValued="false" indexed="true" />
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_drms" stored="true" type="daterange" multiValued="true" indexed="true" />
-
-    <!-- Type used to index the lat and lon components for the "location" FieldType -->
-    <dynamicField name="*_coordinate"  type="tdouble" indexed="true"  stored="false" multiValued="false"/>
-    <dynamicField name="*_p" type="location" indexed="true" stored="true" multiValued="false"/>
-
-    <dynamicField name="*_ll" stored="false" type="location" multiValued="false" indexed="true"/>
-    <dynamicField name="*_llm" stored="false" type="location" multiValued="true" indexed="true"/>
-    <dynamicField name="*_lls" stored="true" type="location" multiValued="false" indexed="true"/>
-    <dynamicField name="*_llms" stored="true" type="location" multiValued="true" indexed="true"/>
-    <field name="textSpell" stored="false" type="textSpell" multiValued="true" indexed="true"/>
-    
-    <!-- required by Solr 5 -->
-    <field name="_version_" type="tlong" indexed="true" stored="true" multiValued="false" />
-  </fields>
-  
-  <!-- Field to use to determine and enforce document uniqueness.
-      Unless this field is marked with required="false", it will be a required field
-   -->
-  <uniqueKey>id</uniqueKey>
-  <!-- field for the QueryParser to use when an explicit fieldname is absent -->
-  <defaultSearchField>text</defaultSearchField>
-  <!-- SolrQueryParser configuration: defaultOperator="AND|OR" -->
-  <solrQueryParser defaultOperator="AND"/>
-  <!-- copyField commands copy one field to another at the time a document
-        is added to the index.  It's used either to index the same field differently,
-        or to add multiple fields to the same field for easier/faster
-        searching.  -->
-
-  <!-- Use copyField to copy the fields you want to run spell checking
-       on into one field. For example: -->
-  <copyField source="*_text"  dest="textSpell" />
-  <copyField source="*_s"  dest="textSpell" />
-</schema>

data/spec/dummy/solr/configsets/sunspot/conf/scripts.conf

@@ -1,24 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-user=
-solr_hostname=localhost
-solr_port=8983
-rsyncd_port=18983
-data_dir=
-webapp_name=solr
-master_host=
-master_data_dir=
-master_status_dir=

data/spec/dummy/solr/configsets/sunspot/conf/solrconfig.xml

@@ -1,631 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- 
-     For more details about configurations options that may appear in
-     this file, see http://wiki.apache.org/solr/SolrConfigXml. 
--->
-<config>
-  <!-- In all configuration below, a prefix of "solr." for class names
-       is an alias that causes solr to search appropriate packages,
-       including org.apache.solr.(search|update|request|core|analysis)
-
-       You may also specify a fully qualified Java classname if you
-       have your own custom plugins.
-    -->
-
-  <!-- Controls what version of Lucene various components of Solr
-       adhere to.  Generally, you want to use the latest version to
-       get all bug fixes and improvements. It is highly recommended
-       that you fully re-index after changing this setting as it can
-       affect both how text is indexed and queried.
-  -->
-  <luceneMatchVersion>5.0.0</luceneMatchVersion>
-
-  <!-- Data Directory
-
-       Used to specify an alternate directory to hold all index data
-       other than the default ./data under the Solr home.  If
-       replication is in use, this should match the replication
-       configuration.
-    -->
-  <dataDir>${solr.data.dir:}</dataDir>
-
-
-  <!-- The DirectoryFactory to use for indexes.
-       
-       solr.StandardDirectoryFactory is filesystem
-       based and tries to pick the best implementation for the current
-       JVM and platform.  solr.NRTCachingDirectoryFactory, the default,
-       wraps solr.StandardDirectoryFactory and caches small files in memory
-       for better NRT performance.
-
-       One can force a particular implementation via solr.MMapDirectoryFactory,
-       solr.NIOFSDirectoryFactory, or solr.SimpleFSDirectoryFactory.
-
-       solr.RAMDirectoryFactory is memory based, not
-       persistent, and doesn't work with replication.
-    -->
-  <directoryFactory name="DirectoryFactory" 
-                    class="${solr.directoryFactory:solr.NRTCachingDirectoryFactory}">
-  </directoryFactory> 
-
-  <!-- The CodecFactory for defining the format of the inverted index.
-       The default implementation is SchemaCodecFactory, which is the official Lucene
-       index format, but hooks into the schema to provide per-field customization of
-       the postings lists and per-document values in the fieldType element
-       (postingsFormat/docValuesFormat). Note that most of the alternative implementations
-       are experimental, so if you choose to customize the index format, it's a good
-       idea to convert back to the official format e.g. via IndexWriter.addIndexes(IndexReader)
-       before upgrading to a newer version to avoid unnecessary reindexing.
-  -->
-  <codecFactory class="solr.SchemaCodecFactory"/>
-
-  <schemaFactory class="ClassicIndexSchemaFactory"/>
-
-  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-       Index Config - These settings control low-level behavior of indexing
-       Most example settings here show the default value, but are commented
-       out, to more easily see where customizations have been made.
-       
-       Note: This replaces <indexDefaults> and <mainIndex> from older versions
-       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
-  <indexConfig>
-
-    <!-- LockFactory 
-
-         This option specifies which Lucene LockFactory implementation
-         to use.
-      
-         single = SingleInstanceLockFactory - suggested for a
-                  read-only index or when there is no possibility of
-                  another process trying to modify the index.
-         native = NativeFSLockFactory - uses OS native file locking.
-                  Do not use when multiple solr webapps in the same
-                  JVM are attempting to share a single index.
-         simple = SimpleFSLockFactory  - uses a plain file for locking
-
-         Defaults: 'native' is default for Solr3.6 and later, otherwise
-                   'simple' is the default
-
-         More details on the nuances of each LockFactory...
-         http://wiki.apache.org/lucene-java/AvailableLockFactories
-    -->
-    <lockType>${solr.lock.type:native}</lockType>
-
-    <!-- Lucene Infostream
-       
-         To aid in advanced debugging, Lucene provides an "InfoStream"
-         of detailed information when indexing.
-
-         Setting the value to true will instruct the underlying Lucene
-         IndexWriter to write its info stream to solr's log. By default,
-         this is enabled here, and controlled through log4j.properties.
-      -->
-     <infoStream>true</infoStream>
-  </indexConfig>
-
-
-  <!-- JMX
-       
-       This example enables JMX if and only if an existing MBeanServer
-       is found, use this if you want to configure JMX through JVM
-       parameters. Remove this to disable exposing Solr configuration
-       and statistics to JMX.
-
-       For more details see http://wiki.apache.org/solr/SolrJmx
-    -->
-  <jmx />
-  <!-- If you want to connect to a particular server, specify the
-       agentId 
-    -->
-  <!-- <jmx agentId="myAgent" /> -->
-  <!-- If you want to start a new MBeanServer, specify the serviceUrl -->
-  <!-- <jmx serviceUrl="service:jmx:rmi:///jndi/rmi://localhost:9999/solr"/>
-    -->
-
-  <!-- The default high-performance update handler -->
-  <updateHandler class="solr.DirectUpdateHandler2">
-
-    <!-- Enables a transaction log, used for real-time get, durability, and
-         and solr cloud replica recovery.  The log can grow as big as
-         uncommitted changes to the index, so use of a hard autoCommit
-         is recommended (see below).
-         "dir" - the target directory for transaction logs, defaults to the
-                solr data directory.  --> 
-    <updateLog>
-      <str name="dir">${solr.ulog.dir:}</str>
-    </updateLog>
- 
-    <!-- AutoCommit
-
-         Perform a hard commit automatically under certain conditions.
-         Instead of enabling autoCommit, consider using "commitWithin"
-         when adding documents. 
-
-         http://wiki.apache.org/solr/UpdateXmlMessages
-
-         maxDocs - Maximum number of documents to add since the last
-                   commit before automatically triggering a new commit.
-
-         maxTime - Maximum amount of time in ms that is allowed to pass
-                   since a document was added before automatically
-                   triggering a new commit. 
-         openSearcher - if false, the commit causes recent index changes
-           to be flushed to stable storage, but does not cause a new
-           searcher to be opened to make those changes visible.
-
-         If the updateLog is enabled, then it's highly recommended to
-         have some sort of hard autoCommit to limit the log size.
-      -->
-     <autoCommit> 
-       <maxTime>${solr.autoCommit.maxTime:15000}</maxTime> 
-       <openSearcher>false</openSearcher> 
-     </autoCommit>
-
-    <!-- softAutoCommit is like autoCommit except it causes a
-         'soft' commit which only ensures that changes are visible
-         but does not ensure that data is synced to disk.  This is
-         faster and more near-realtime friendly than a hard commit.
-      -->
-     <autoSoftCommit> 
-       <maxTime>${solr.autoSoftCommit.maxTime:-1}</maxTime> 
-     </autoSoftCommit>
-
-  </updateHandler>
-  
-  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-       Query section - these settings control query time things like caches
-       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
-  <query>
-    <!-- Max Boolean Clauses
-
-         Maximum number of clauses in each BooleanQuery,  an exception
-         is thrown if exceeded.
-
-         ** WARNING **
-         
-         This option actually modifies a global Lucene property that
-         will affect all SolrCores.  If multiple solrconfig.xml files
-         disagree on this property, the value at any given moment will
-         be based on the last SolrCore to be initialized.
-         
-      -->
-    <maxBooleanClauses>1024</maxBooleanClauses>
-
-
-    <!-- Solr Internal Query Caches
-
-         There are two implementations of cache available for Solr,
-         LRUCache, based on a synchronized LinkedHashMap, and
-         FastLRUCache, based on a ConcurrentHashMap.  
-
-         FastLRUCache has faster gets and slower puts in single
-         threaded operation and thus is generally faster than LRUCache
-         when the hit ratio of the cache is high (> 75%), and may be
-         faster under other scenarios on multi-cpu systems.
-    -->
-
-    <!-- Filter Cache
-
-         Cache used by SolrIndexSearcher for filters (DocSets),
-         unordered sets of *all* documents that match a query.  When a
-         new searcher is opened, its caches may be prepopulated or
-         "autowarmed" using data from caches in the old searcher.
-         autowarmCount is the number of items to prepopulate.  For
-         LRUCache, the autowarmed items will be the most recently
-         accessed items.
-
-         Parameters:
-           class - the SolrCache implementation LRUCache or
-               (LRUCache or FastLRUCache)
-           size - the maximum number of entries in the cache
-           initialSize - the initial capacity (number of entries) of
-               the cache.  (see java.util.HashMap)
-           autowarmCount - the number of entries to prepopulate from
-               and old cache.  
-      -->
-    <filterCache class="solr.FastLRUCache"
-                 size="512"
-                 initialSize="512"
-                 autowarmCount="0"/>
-
-    <!-- Query Result Cache
-         
-         Caches results of searches - ordered lists of document ids
-         (DocList) based on a query, a sort, and the range of documents requested.  
-      -->
-    <queryResultCache class="solr.LRUCache"
-                     size="512"
-                     initialSize="512"
-                     autowarmCount="0"/>
-   
-    <!-- Document Cache
-
-         Caches Lucene Document objects (the stored fields for each
-         document).  Since Lucene internal document ids are transient,
-         this cache will not be autowarmed.  
-      -->
-    <documentCache class="solr.LRUCache"
-                   size="512"
-                   initialSize="512"
-                   autowarmCount="0"/>
-    
-    <!-- custom cache currently used by block join --> 
-    <cache name="perSegFilter"
-      class="solr.search.LRUCache"
-      size="10"
-      initialSize="0"
-      autowarmCount="10"
-      regenerator="solr.NoOpRegenerator" />
-
-    <!-- Lazy Field Loading
-
-         If true, stored fields that are not requested will be loaded
-         lazily.  This can result in a significant speed improvement
-         if the usual case is to not load all stored fields,
-         especially if the skipped fields are large compressed text
-         fields.
-    -->
-    <enableLazyFieldLoading>true</enableLazyFieldLoading>
-
-   <!-- Result Window Size
-
-        An optimization for use with the queryResultCache.  When a search
-        is requested, a superset of the requested number of document ids
-        are collected.  For example, if a search for a particular query
-        requests matching documents 10 through 19, and queryWindowSize is 50,
-        then documents 0 through 49 will be collected and cached.  Any further
-        requests in that range can be satisfied via the cache.  
-     -->
-   <queryResultWindowSize>20</queryResultWindowSize>
-
-   <!-- Maximum number of documents to cache for any entry in the
-        queryResultCache. 
-     -->
-   <queryResultMaxDocsCached>200</queryResultMaxDocsCached>
-
-    <!-- Use Cold Searcher
-
-         If a search request comes in and there is no current
-         registered searcher, then immediately register the still
-         warming searcher and use it.  If "false" then all requests
-         will block until the first searcher is done warming.
-      -->
-    <useColdSearcher>false</useColdSearcher>
-
-    <!-- Max Warming Searchers
-         
-         Maximum number of searchers that may be warming in the
-         background concurrently.  An error is returned if this limit
-         is exceeded.
-
-         Recommend values of 1-2 for read-only slaves, higher for
-         masters w/o cache warming.
-      -->
-    <maxWarmingSearchers>2</maxWarmingSearchers>
-
-  </query>
-
-
-  <!-- Request Dispatcher
-
-       This section contains instructions for how the SolrDispatchFilter
-       should behave when processing requests for this SolrCore.
-
-       handleSelect is a legacy option that affects the behavior of requests
-       such as /select?qt=XXX
-
-       handleSelect="true" will cause the SolrDispatchFilter to process
-       the request and dispatch the query to a handler specified by the 
-       "qt" param, assuming "/select" isn't already registered.
-
-       handleSelect="false" will cause the SolrDispatchFilter to
-       ignore "/select" requests, resulting in a 404 unless a handler
-       is explicitly registered with the name "/select"
-
-       handleSelect="true" is not recommended for new users, but is the default
-       for backwards compatibility
-    -->
-  <requestDispatcher handleSelect="false" >
-    <!-- Request Parsing
-
-         These settings indicate how Solr Requests may be parsed, and
-         what restrictions may be placed on the ContentStreams from
-         those requests
-
-         enableRemoteStreaming - enables use of the stream.file
-         and stream.url parameters for specifying remote streams.
-
-         multipartUploadLimitInKB - specifies the max size (in KiB) of
-         Multipart File Uploads that Solr will allow in a Request.
-         
-         formdataUploadLimitInKB - specifies the max size (in KiB) of
-         form data (application/x-www-form-urlencoded) sent via
-         POST. You can use POST to pass request parameters not
-         fitting into the URL.
-         
-         addHttpRequestToContext - if set to true, it will instruct
-         the requestParsers to include the original HttpServletRequest
-         object in the context map of the SolrQueryRequest under the 
-         key "httpRequest". It will not be used by any of the existing
-         Solr components, but may be useful when developing custom 
-         plugins.
-         
-         *** WARNING ***
-         The settings below authorize Solr to fetch remote files, You
-         should make sure your system has some authentication before
-         using enableRemoteStreaming="true"
-
-      --> 
-    <requestParsers enableRemoteStreaming="true" 
-                    multipartUploadLimitInKB="2048000"
-                    formdataUploadLimitInKB="2048"
-                    addHttpRequestToContext="false"/>
-
-    <!-- HTTP Caching
-
-         Set HTTP caching related parameters (for proxy caches and clients).
-
-         The options below instruct Solr not to output any HTTP Caching
-         related headers
-      -->
-    <httpCaching never304="true" />
-
-  </requestDispatcher>
-
-  <!-- Request Handlers 
-
-       http://wiki.apache.org/solr/SolrRequestHandler
-
-       Incoming queries will be dispatched to a specific handler by name
-       based on the path specified in the request.
-
-       Legacy behavior: If the request path uses "/select" but no Request
-       Handler has that name, and if handleSelect="true" has been specified in
-       the requestDispatcher, then the Request Handler is dispatched based on
-       the qt parameter.  Handlers without a leading '/' are accessed this way
-       like so: http://host/app/[core/]select?qt=name  If no qt is
-       given, then the requestHandler that declares default="true" will be
-       used or the one named "standard".
-
-       If a Request Handler is declared with startup="lazy", then it will
-       not be initialized until the first request that uses it.
-
-    -->
-  <!-- SearchHandler
-
-       http://wiki.apache.org/solr/SearchHandler
-
-       For processing Search Queries, the primary Request Handler
-       provided with Solr is "SearchHandler" It delegates to a sequent
-       of SearchComponents (see below) and supports distributed
-       queries across multiple shards
-    -->
-  <requestHandler name="/select" class="solr.SearchHandler">
-    <lst name="defaults">
-      <str name="spellcheck.dictionary">default</str>
-      <str name="spellcheck.extendedResults">true</str>
-      <str name="spellcheck.collate">true</str>
-    </lst>
-    <arr name="last-components">
-      <str>spellcheck</str>
-    </arr>
-  </requestHandler>
-
-  <!-- A request handler that returns indented JSON by default -->
-  <requestHandler name="/query" class="solr.SearchHandler">
-     <lst name="defaults">
-       <str name="echoParams">explicit</str>
-       <str name="wt">json</str>
-       <str name="indent">true</str>
-       <str name="df">text</str>
-     </lst>
-     <arr name="last-components">
-       <str>spellcheck</str>
-     </arr>
-  </requestHandler>
-
-  <!--
-    The export request handler is used to export full sorted result sets.
-    Do not change these defaults.
-  -->
-  <requestHandler name="/export" class="solr.SearchHandler">
-    <lst name="invariants">
-      <str name="rq">{!xport}</str>
-      <str name="wt">xsort</str>
-      <str name="distrib">false</str>
-    </lst>
-
-    <arr name="components">
-      <str>query</str>
-    </arr>
-  </requestHandler>
-
-
-  <initParams path="/update/**,/query,/select,/tvrh,/elevate,/spell">
-    <lst name="defaults">
-      <str name="df">text</str>
-    </lst>
-  </initParams>
-
-  <!-- Field Analysis Request Handler
-
-       RequestHandler that provides much the same functionality as
-       analysis.jsp. Provides the ability to specify multiple field
-       types and field names in the same request and outputs
-       index-time and query-time analysis for each of them.
-
-       Request parameters are:
-       analysis.fieldname - field name whose analyzers are to be used
-
-       analysis.fieldtype - field type whose analyzers are to be used
-       analysis.fieldvalue - text for index-time analysis
-       q (or analysis.q) - text for query time analysis
-       analysis.showmatch (true|false) - When set to true and when
-           query analysis is performed, the produced tokens of the
-           field value analysis will be marked as "matched" for every
-           token that is produces by the query analysis
-   -->
-  <requestHandler name="/analysis/field" 
-                  startup="lazy"
-                  class="solr.FieldAnalysisRequestHandler" />
-
-
-  <!-- Document Analysis Handler
-
-       http://wiki.apache.org/solr/AnalysisRequestHandler
-
-       An analysis handler that provides a breakdown of the analysis
-       process of provided documents. This handler expects a (single)
-       content stream with the following format:
-
-       <docs>
-         <doc>
-           <field name="id">1</field>
-           <field name="name">The Name</field>
-           <field name="text">The Text Value</field>
-         </doc>
-         <doc>...</doc>
-         <doc>...</doc>
-         ...
-       </docs>
-
-    Note: Each document must contain a field which serves as the
-    unique key. This key is used in the returned response to associate
-    an analysis breakdown to the analyzed document.
-
-    Like the FieldAnalysisRequestHandler, this handler also supports
-    query analysis by sending either an "analysis.query" or "q"
-    request parameter that holds the query text to be analyzed. It
-    also supports the "analysis.showmatch" parameter which when set to
-    true, all field tokens that match the query tokens will be marked
-    as a "match". 
-  -->
-  <requestHandler name="/analysis/document" 
-                  class="solr.DocumentAnalysisRequestHandler" 
-                  startup="lazy" />
-
-  <!-- Echo the request contents back to the client -->
-  <requestHandler name="/debug/dump" class="solr.DumpRequestHandler" >
-    <lst name="defaults">
-     <str name="echoParams">explicit</str> 
-     <str name="echoHandler">true</str>
-    </lst>
-  </requestHandler>
-  
-  <searchComponent name="spellcheck" class="solr.SpellCheckComponent">
-
-    <str name="queryAnalyzerFieldType">textSpell</str>
-
-    <!-- Multiple "Spell Checkers" can be declared and used by this
-         component
-      -->
-    <lst name="spellchecker">
-      <str name="name">default</str>
-      <!-- change field to textSpell and use copyField in schema.xml
-      to spellcheck multiple fields -->
-      <str name="field">textSpell</str>
-      <str name="buildOnOptimize">true</str>
-    </lst>
-
-    <lst name="spellchecker">
-      <str name="name">example</str>
-      <str name="field">title_text</str>
-      <str name="buildOnOptimize">true</str>
-      <str name="classname">solr.DirectSolrSpellChecker</str>
-      <!-- the spellcheck distance measure used, the default is the internal levenshtein -->
-      <str name="distanceMeasure">internal</str>
-      <!-- minimum accuracy needed to be considered a valid spellcheck suggestion -->
-      <float name="accuracy">0.5</float>
-      <!-- the maximum #edits we consider when enumerating terms: can be 1 or 2 -->
-      <int name="maxEdits">2</int>
-      <!-- the minimum shared prefix when enumerating terms -->
-      <int name="minPrefix">1</int>
-      <!-- maximum number of inspections per result. -->
-      <int name="maxInspections">5</int>
-      <!-- minimum length of a query term to be considered for correction -->
-      <int name="minQueryLength">4</int>
-      <!-- maximum threshold of documents a query term can appear to be considered for correction -->
-      <float name="maxQueryFrequency">0.01</float>
-      <!-- uncomment this to require suggestions to occur in 1% of the documents
-           <float name="thresholdTokenFrequency">.01</float>
-      -->
-    </lst>
-
-    <!-- a spellchecker that can break or combine words.  See "/spell" handler below for usage -->
-    <lst name="spellchecker">
-      <str name="name">wordbreak</str>
-      <str name="classname">solr.WordBreakSolrSpellChecker</str>
-      <str name="field">name</str>
-      <str name="combineWords">true</str>
-      <str name="breakWords">true</str>
-      <int name="maxChanges">10</int>
-    </lst>
-    -->
-  </searchComponent>
-
-  <!-- Search Components
-
-       Search components are registered to SolrCore and used by 
-       instances of SearchHandler (which can access them by name)
-       
-       By default, the following components are available:
-       
-       <searchComponent name="query"     class="solr.QueryComponent" />
-       <searchComponent name="facet"     class="solr.FacetComponent" />
-       <searchComponent name="mlt"       class="solr.MoreLikeThisComponent" />
-       <searchComponent name="highlight" class="solr.HighlightComponent" />
-       <searchComponent name="stats"     class="solr.StatsComponent" />
-       <searchComponent name="debug"     class="solr.DebugComponent" />
-       
-     -->
-
-  <!-- Terms Component
-
-       http://wiki.apache.org/solr/TermsComponent
-
-       A component to return terms and document frequency of those
-       terms
-    -->
-  <searchComponent name="terms" class="solr.TermsComponent"/>
-
-  <!-- A request handler for demonstrating the terms component -->
-  <requestHandler name="/terms" class="solr.SearchHandler" startup="lazy">
-     <lst name="defaults">
-      <bool name="terms">true</bool>
-      <bool name="distrib">false</bool>
-    </lst>     
-    <arr name="components">
-      <str>terms</str>
-    </arr>
-  </requestHandler>
-
-  <requestHandler class="solr.MoreLikeThisHandler" name="/mlt">
-    <lst name="defaults">
-      <str name="mlt.mintf">1</str>
-      <str name="mlt.mindf">2</str>
-    </lst>
-  </requestHandler>
-
-  <!-- Legacy config for the admin interface -->
-  <admin>
-    <defaultQuery>*:*</defaultQuery>
-  </admin>
-
-</config>