enju_flower 0.1.0.pre20 → 0.1.0.pre21

data/spec/dummy/solr/conf/protwords.txt

@@ -1,21 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#-----------------------------------------------------------------------
-# Use a protected word file to protect against the stemmer reducing two
-# unrelated words to the same base word.
-
-# Some non-words that normally won't be encountered,
-# just to test that they won't be stemmed.
-dontstems
-zwhacky
-

data/spec/dummy/solr/conf/schema.xml

@@ -1,255 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<!--  
- This is the Solr schema file. This file should be named "schema.xml" and
- should be in the conf directory under the solr home
- (i.e. ./solr/conf/schema.xml by default) 
- or located where the classloader for the Solr webapp can find it.
-
- This example schema is the recommended starting point for users.
- It should be kept correct and concise, usable out-of-the-box.
-
- For more information, on how to customize this file, please see
- http://wiki.apache.org/solr/SchemaXml
-
- PERFORMANCE NOTE: this schema includes many optional features and should not
- be used for benchmarking.  To improve performance one could
-  - set stored="false" for all fields possible (esp large fields) when you
-    only need to search on the field but don't need to return the original
-    value.
-  - set indexed="false" if you don't need to search on the field, but only
-    return the field as a result of searching on other indexed fields.
-  - remove all unneeded copyField statements
-  - for best index size and searching performance, set "index" to false
-    for all general text fields, use copyField to copy them to the
-    catchall "text" field, and use that for searching.
-  - For maximum indexing performance, use the StreamingUpdateSolrServer
-    java client.
-  - Remember to run the JVM in server mode, and use a higher logging level
-    that avoids logging every request
--->
-<schema name="sunspot" version="1.0">
-  <types>
-    <!-- field type definitions. The "name" attribute is
-       just a label to be used by field definitions.  The "class"
-       attribute and any other attributes determine the real
-       behavior of the fieldType.
-         Class names starting with "solr" refer to java classes in the
-       org.apache.solr.analysis package.
-    -->
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="string" class="solr.StrField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tdouble" class="solr.TrieDoubleField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="rand" class="solr.RandomSortField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="text" class="solr.TextField" omitNorms="false">
-      <analyzer>
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.StandardFilterFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-        <filter class="solr.PorterStemFilterFactory"/>
-      </analyzer>
-    </fieldType>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="boolean" class="solr.BoolField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="date" class="solr.DateField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="sdouble" class="solr.SortableDoubleField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="sfloat" class="solr.SortableFloatField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="sint" class="solr.SortableIntField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="slong" class="solr.SortableLongField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tint" class="solr.TrieIntField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tfloat" class="solr.TrieFloatField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tdate" class="solr.TrieDateField" omitNorms="true"/>
-
-    <!-- A specialized field for geospatial search. If indexed, this fieldType must not be multivalued. -->
-    <fieldType name="location" class="solr.LatLonType" subFieldSuffix="_coordinate"/>
-  </types>
-  <fields>
-    <!-- Valid attributes for fields:
-     name: mandatory - the name for the field
-     type: mandatory - the name of a previously defined type from the
-       <types> section
-     indexed: true if this field should be indexed (searchable or sortable)
-     stored: true if this field should be retrievable
-     compressed: [false] if this field should be stored using gzip compression
-       (this will only apply if the field type is compressable; among
-       the standard field types, only TextField and StrField are)
-     multiValued: true if this field may contain multiple values per document
-     omitNorms: (expert) set to true to omit the norms associated with
-       this field (this disables length normalization and index-time
-       boosting for the field, and saves some memory).  Only full-text
-       fields or fields that need an index-time boost need norms.
-     termVectors: [false] set to true to store the term vector for a
-       given field.
-       When using MoreLikeThis, fields used for similarity should be
-       stored for best performance.
-     termPositions: Store position information with the term vector.  
-       This will increase storage costs.
-     termOffsets: Store offset information with the term vector. This 
-       will increase storage costs.
-     default: a value that should be used if no value is specified
-       when adding a document.
-   -->
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="id" stored="true" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="type" stored="false" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="class_name" stored="false" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="text" stored="false" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="lat" stored="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="lng" stored="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="random_*" stored="false" type="rand" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="_local*" stored="false" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_text" stored="false" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_texts" stored="true" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_b" stored="false" type="boolean" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_bm" stored="false" type="boolean" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_bs" stored="true" type="boolean" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_bms" stored="true" type="boolean" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_d" stored="false" type="date" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dm" stored="false" type="date" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ds" stored="true" type="date" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dms" stored="true" type="date" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_e" stored="false" type="sdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_em" stored="false" type="sdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_es" stored="true" type="sdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ems" stored="true" type="sdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_f" stored="false" type="sfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fm" stored="false" type="sfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fs" stored="true" type="sfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fms" stored="true" type="sfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_i" stored="false" type="sint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_im" stored="false" type="sint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_is" stored="true" type="sint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ims" stored="true" type="sint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_l" stored="false" type="slong" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_lm" stored="false" type="slong" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ls" stored="true" type="slong" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_lms" stored="true" type="slong" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_s" stored="false" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_sm" stored="false" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ss" stored="true" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_sms" stored="true" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_it" stored="false" type="tint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_itm" stored="false" type="tint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_its" stored="true" type="tint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_itms" stored="true" type="tint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ft" stored="false" type="tfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ftm" stored="false" type="tfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fts" stored="true" type="tfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ftms" stored="true" type="tfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dt" stored="false" type="tdate" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dtm" stored="false" type="tdate" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dts" stored="true" type="tdate" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dtms" stored="true" type="tdate" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_textv" stored="false" termVectors="true" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_textsv" stored="true" termVectors="true" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_et" stored="false" termVectors="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_etm" stored="false" termVectors="true" type="tdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ets" stored="true" termVectors="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_etms" stored="true" termVectors="true" type="tdouble" multiValued="true" indexed="true"/>
-
-    <!-- Type used to index the lat and lon components for the "location" FieldType -->
-    <dynamicField name="*_coordinate"  type="tdouble" indexed="true"  stored="false" multiValued="false"/>
-    <dynamicField name="*_p" type="location" indexed="true" stored="true" multiValued="false"/>
-
-    <dynamicField name="*_ll" stored="false" type="location" multiValued="false" indexed="true"/>
-    <dynamicField name="*_llm" stored="false" type="location" multiValued="true" indexed="true"/>
-    <dynamicField name="*_lls" stored="true" type="location" multiValued="false" indexed="true"/>
-    <dynamicField name="*_llms" stored="true" type="location" multiValued="true" indexed="true"/>
-    
-    <!-- required by Solr 4 -->
-    <field name="_version_" type="string" indexed="true" stored="true" multiValued="false" />
-  </fields>
-  
-  <!-- Field to use to determine and enforce document uniqueness.
-      Unless this field is marked with required="false", it will be a required field
-   -->
-  <uniqueKey>id</uniqueKey>
-  <!-- field for the QueryParser to use when an explicit fieldname is absent -->
-  <defaultSearchField>text</defaultSearchField>
-  <!-- SolrQueryParser configuration: defaultOperator="AND|OR" -->
-  <solrQueryParser defaultOperator="AND"/>
-  <!-- copyField commands copy one field to another at the time a document
-        is added to the index.  It's used either to index the same field differently,
-        or to add multiple fields to the same field for easier/faster searching.  -->
-</schema>

data/spec/dummy/solr/conf/scripts.conf

@@ -1,24 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-user=
-solr_hostname=localhost
-solr_port=8983
-rsyncd_port=18983
-data_dir=
-webapp_name=solr
-master_host=
-master_data_dir=
-master_status_dir=

data/spec/dummy/solr/conf/solrconfig.xml

@@ -1,667 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- 
-     For more details about configurations options that may appear in
-     this file, see http://wiki.apache.org/solr/SolrConfigXml. 
--->
-<config>
-  <!-- In all configuration below, a prefix of "solr." for class names
-       is an alias that causes solr to search appropriate packages,
-       including org.apache.solr.(search|update|request|core|analysis)
-
-       You may also specify a fully qualified Java classname if you
-       have your own custom plugins.
-    -->
-
-  <!-- Controls what version of Lucene various components of Solr
-       adhere to.  Generally, you want to use the latest version to
-       get all bug fixes and improvements. It is highly recommended
-       that you fully re-index after changing this setting as it can
-       affect both how text is indexed and queried.
-  -->
-  <luceneMatchVersion>LUCENE_41</luceneMatchVersion>
-
-  <!-- <lib/> directives can be used to instruct Solr to load an Jars
-       identified and use them to resolve any "plugins" specified in
-       your solrconfig.xml or schema.xml (ie: Analyzers, Request
-       Handlers, etc...).
-
-       All directories and paths are resolved relative to the
-       instanceDir.
-
-       Please note that <lib/> directives are processed in the order
-       that they appear in your solrconfig.xml file, and are "stacked" 
-       on top of each other when building a ClassLoader - so if you have 
-       plugin jars with dependencies on other jars, the "lower level" 
-       dependency jars should be loaded first.
-
-       If a "./lib" directory exists in your instanceDir, all files
-       found in it are included as if you had used the following
-       syntax...
-       
-              <lib dir="./lib" />
-    -->
-  <dataDir>${solr.data.dir:}</dataDir>
-
-
-  <!-- The DirectoryFactory to use for indexes.
-       
-       solr.StandardDirectoryFactory is filesystem
-       based and tries to pick the best implementation for the current
-       JVM and platform.  solr.NRTCachingDirectoryFactory, the default,
-       wraps solr.StandardDirectoryFactory and caches small files in memory
-       for better NRT performance.
-
-       One can force a particular implementation via solr.MMapDirectoryFactory,
-       solr.NIOFSDirectoryFactory, or solr.SimpleFSDirectoryFactory.
-
-       solr.RAMDirectoryFactory is memory based, not
-       persistent, and doesn't work with replication.
-    -->
-  <directoryFactory name="DirectoryFactory" 
-                    class="${solr.directoryFactory:solr.NRTCachingDirectoryFactory}"/> 
-
-  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-       Index Config - These settings control low-level behavior of indexing
-       Most example settings here show the default value, but are commented
-       out, to more easily see where customizations have been made.
-       
-       Note: This replaces <indexDefaults> and <mainIndex> from older versions
-       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
-  <indexConfig>
-    <!-- maxFieldLength was removed in 4.0. To get similar behavior, include a 
-         LimitTokenCountFilterFactory in your fieldType definition. E.g. 
-     <filter class="solr.LimitTokenCountFilterFactory" maxTokenCount="10000"/>
-    -->
-    <!-- Maximum time to wait for a write lock (ms) for an IndexWriter. Default: 1000 -->
-    <!-- <writeLockTimeout>1000</writeLockTimeout>  -->
-
-    <!-- The maximum number of simultaneous threads that may be
-         indexing documents at once in IndexWriter; if more than this
-         many threads arrive they will wait for others to finish.
-         Default in Solr/Lucene is 8. -->
-    <maxIndexingThreads>2</maxIndexingThreads> 
-
-    <useCompoundFile>true</useCompoundFile>
-
-    <!-- ramBufferSizeMB sets the amount of RAM that may be used by Lucene
-         indexing for buffering added documents and deletions before they are
-         flushed to the Directory.
-         maxBufferedDocs sets a limit on the number of documents buffered
-         before flushing.
-         If both ramBufferSizeMB and maxBufferedDocs is set, then
-         Lucene will flush based on whichever limit is hit first.  -->
-    <ramBufferSizeMB>20</ramBufferSizeMB> -->
-    <maxBufferedDocs>10000</maxBufferedDocs>
-
-    <!-- Expert: Merge Policy 
-         The Merge Policy in Lucene controls how merging of segments is done.
-         The default since Solr/Lucene 3.3 is TieredMergePolicy.
-         The default since Lucene 2.3 was the LogByteSizeMergePolicy,
-         Even older versions of Lucene used LogDocMergePolicy.
-      -->
-    <mergePolicy class="org.apache.lucene.index.TieredMergePolicy">
-      <int name="maxMergeAtOnce">4</int>
-      <int name="segmentsPerTier">4</int>
-    </mergePolicy>
-    
-    <unlockOnStartup>true</unlockOnStartup>
-    
-  </indexConfig>
-
-  <updateHandler class="solr.DirectUpdateHandler2">
-
-    <!-- Enables a transaction log, used for real-time get, durability, and
-         and solr cloud replica recovery.  The log can grow as big as
-         uncommitted changes to the index, so use of a hard autoCommit
-         is recommended (see below).
-         "dir" - the target directory for transaction logs, defaults to the
-                solr data directory.  --> 
-    <updateLog>
-      <str name="dir">${solr.ulog.dir:}</str>
-    </updateLog>
-
-     <autoCommit> 
-       <maxTime>15000</maxTime> 
-       <openSearcher>false</openSearcher> 
-     </autoCommit>
-
-     <autoSoftCommit> 
-       <maxTime>5000</maxTime> 
-     </autoSoftCommit>
-  </updateHandler>
-
-  <query>
-    <maxBooleanClauses>1024</maxBooleanClauses>
-
-
-    <!-- Solr Internal Query Caches
-
-         There are two implementations of cache available for Solr,
-         LRUCache, based on a synchronized LinkedHashMap, and
-         FastLRUCache, based on a ConcurrentHashMap.  
-
-         FastLRUCache has faster gets and slower puts in single
-         threaded operation and thus is generally faster than LRUCache
-         when the hit ratio of the cache is high (> 75%), and may be
-         faster under other scenarios on multi-cpu systems.
-    -->
-
-    <!-- Filter Cache
-
-         Cache used by SolrIndexSearcher for filters (DocSets),
-         unordered sets of *all* documents that match a query.  When a
-         new searcher is opened, its caches may be prepopulated or
-         "autowarmed" using data from caches in the old searcher.
-         autowarmCount is the number of items to prepopulate.  For
-         LRUCache, the autowarmed items will be the most recently
-         accessed items.
-
-         Parameters:
-           class - the SolrCache implementation LRUCache or
-               (LRUCache or FastLRUCache)
-           size - the maximum number of entries in the cache
-           initialSize - the initial capacity (number of entries) of
-               the cache.  (see java.util.HashMap)
-           autowarmCount - the number of entries to prepopulate from
-               and old cache.  
-      -->
-    <filterCache class="solr.FastLRUCache"
-                 size="512"
-                 initialSize="512"
-                 autowarmCount="0"/>
-
-    <!-- Query Result Cache
-         
-         Caches results of searches - ordered lists of document ids
-         (DocList) based on a query, a sort, and the range of documents requested.  
-      -->
-    <queryResultCache class="solr.LRUCache"
-                     size="512"
-                     initialSize="512"
-                     autowarmCount="0"/>
-   
-    <!-- Document Cache
-
-         Caches Lucene Document objects (the stored fields for each
-         document).  Since Lucene internal document ids are transient,
-         this cache will not be autowarmed.  
-      -->
-    <documentCache class="solr.LRUCache"
-                   size="512"
-                   initialSize="512"
-                   autowarmCount="0"/>
-
-    <!-- Lazy Field Loading
-
-         If true, stored fields that are not requested will be loaded
-         lazily.  This can result in a significant speed improvement
-         if the usual case is to not load all stored fields,
-         especially if the skipped fields are large compressed text
-         fields.
-    -->
-    <enableLazyFieldLoading>true</enableLazyFieldLoading>
-
-   <!-- Use Filter For Sorted Query
-
-        A possible optimization that attempts to use a filter to
-        satisfy a search.  If the requested sort does not include
-        score, then the filterCache will be checked for a filter
-        matching the query. If found, the filter will be used as the
-        source of document ids, and then the sort will be applied to
-        that.
-
-        For most situations, this will not be useful unless you
-        frequently get the same search repeatedly with different sort
-        options, and none of them ever use "score"
-     -->
-   <!--
-      <useFilterForSortedQuery>true</useFilterForSortedQuery>
-     -->
-
-   <!-- Result Window Size
-
-        An optimization for use with the queryResultCache.  When a search
-        is requested, a superset of the requested number of document ids
-        are collected.  For example, if a search for a particular query
-        requests matching documents 10 through 19, and queryWindowSize is 50,
-        then documents 0 through 49 will be collected and cached.  Any further
-        requests in that range can be satisfied via the cache.  
-     -->
-   <queryResultWindowSize>20</queryResultWindowSize>
-
-   <!-- Maximum number of documents to cache for any entry in the
-        queryResultCache. 
-     -->
-   <queryResultMaxDocsCached>200</queryResultMaxDocsCached>
-
-   <!-- Query Related Event Listeners
-
-        Various IndexSearcher related events can trigger Listeners to
-        take actions.
-
-        newSearcher - fired whenever a new searcher is being prepared
-        and there is a current searcher handling requests (aka
-        registered).  It can be used to prime certain caches to
-        prevent long request times for certain requests.
-
-        firstSearcher - fired whenever a new searcher is being
-        prepared but there is no current registered searcher to handle
-        requests or to gain autowarming data from.
-
-        
-     -->
-
-    <!-- Use Cold Searcher
-
-         If a search request comes in and there is no current
-         registered searcher, then immediately register the still
-         warming searcher and use it.  If "false" then all requests
-         will block until the first searcher is done warming.
-      -->
-    <useColdSearcher>false</useColdSearcher>
-
-    <!-- Max Warming Searchers
-         
-         Maximum number of searchers that may be warming in the
-         background concurrently.  An error is returned if this limit
-         is exceeded.
-
-         Recommend values of 1-2 for read-only slaves, higher for
-         masters w/o cache warming.
-      -->
-    <maxWarmingSearchers>5</maxWarmingSearchers>
-
-  </query>
-
-
-  <!-- Request Dispatcher
-
-       This section contains instructions for how the SolrDispatchFilter
-       should behave when processing requests for this SolrCore.
-
-       handleSelect is a legacy option that affects the behavior of requests
-       such as /select?qt=XXX
-
-       handleSelect="true" will cause the SolrDispatchFilter to process
-       the request and dispatch the query to a handler specified by the 
-       "qt" param, assuming "/select" isn't already registered.
-
-       handleSelect="false" will cause the SolrDispatchFilter to
-       ignore "/select" requests, resulting in a 404 unless a handler
-       is explicitly registered with the name "/select"
-
-       handleSelect="true" is not recommended for new users, but is the default
-       for backwards compatibility
-    -->
-  <requestDispatcher handleSelect="false" >
-    <!-- Request Parsing
-
-         These settings indicate how Solr Requests may be parsed, and
-         what restrictions may be placed on the ContentStreams from
-         those requests
-
-         enableRemoteStreaming - enables use of the stream.file
-         and stream.url parameters for specifying remote streams.
-
-         multipartUploadLimitInKB - specifies the max size (in KiB) of
-         Multipart File Uploads that Solr will allow in a Request.
-         
-         formdataUploadLimitInKB - specifies the max size (in KiB) of
-         form data (application/x-www-form-urlencoded) sent via
-         POST. You can use POST to pass request parameters not
-         fitting into the URL.
-         
-         *** WARNING ***
-         The settings below authorize Solr to fetch remote files, You
-         should make sure your system has some authentication before
-         using enableRemoteStreaming="true"
-
-      --> 
-
-    <!-- HTTP Caching
-
-         Set HTTP caching related parameters (for proxy caches and clients).
-
-         The options below instruct Solr not to output any HTTP Caching
-         related headers
-      -->
-    <httpCaching never304="true" />
-    <!-- If you include a <cacheControl> directive, it will be used to
-         generate a Cache-Control header (as well as an Expires header
-         if the value contains "max-age=")
-         
-         By default, no Cache-Control header is generated.
-         
-         You can use the <cacheControl> option even if you have set
-         never304="true"
-      -->
-    <!--
-       <httpCaching never304="true" >
-         <cacheControl>max-age=30, public</cacheControl> 
-       </httpCaching>
-      -->
-    <!-- To enable Solr to respond with automatically generated HTTP
-         Caching headers, and to response to Cache Validation requests
-         correctly, set the value of never304="false"
-         
-         This will cause Solr to generate Last-Modified and ETag
-         headers based on the properties of the Index.
-
-         The following options can also be specified to affect the
-         values of these headers...
-
-         lastModFrom - the default value is "openTime" which means the
-         Last-Modified value (and validation against If-Modified-Since
-         requests) will all be relative to when the current Searcher
-         was opened.  You can change it to lastModFrom="dirLastMod" if
-         you want the value to exactly correspond to when the physical
-         index was last modified.
-
-         etagSeed="..." is an option you can change to force the ETag
-         header (and validation against If-None-Match requests) to be
-         different even if the index has not changed (ie: when making
-         significant changes to your config file)
-
-         (lastModifiedFrom and etagSeed are both ignored if you use
-         the never304="true" option)
-      -->
-    <!--
-       <httpCaching lastModifiedFrom="openTime"
-                    etagSeed="Solr">
-         <cacheControl>max-age=30, public</cacheControl> 
-       </httpCaching>
-      -->
-  </requestDispatcher>
-
-  <!-- Request Handlers 
-
-       http://wiki.apache.org/solr/SolrRequestHandler
-
-       Incoming queries will be dispatched to a specific handler by name
-       based on the path specified in the request.
-
-       Legacy behavior: If the request path uses "/select" but no Request
-       Handler has that name, and if handleSelect="true" has been specified in
-       the requestDispatcher, then the Request Handler is dispatched based on
-       the qt parameter.  Handlers without a leading '/' are accessed this way
-       like so: http://host/app/[core/]select?qt=name  If no qt is
-       given, then the requestHandler that declares default="true" will be
-       used or the one named "standard".
-
-       If a Request Handler is declared with startup="lazy", then it will
-       not be initialized until the first request that uses it.
-
-    -->
-  <!-- SearchHandler
-
-       http://wiki.apache.org/solr/SearchHandler
-
-       For processing Search Queries, the primary Request Handler
-       provided with Solr is "SearchHandler" It delegates to a sequent
-       of SearchComponents (see below) and supports distributed
-       queries across multiple shards
-    -->
-  <requestHandler name="/select" class="solr.SearchHandler">
-    <arr name="last-components">
-      <str>spellcheck</str>
-    </arr>
-  </requestHandler>
-
-  <!-- A request handler that returns indented JSON by default -->
-  <requestHandler name="/query" class="solr.SearchHandler">
-     <lst name="defaults">
-       <str name="echoParams">explicit</str>
-       <str name="wt">json</str>
-       <str name="indent">true</str>
-       <str name="df">text</str>
-     </lst>
-     <arr name="last-components">
-       <str>spellcheck</str>
-     </arr>     
-  </requestHandler>
-
-
-  <!-- realtime get handler, guaranteed to return the latest stored fields of
-       any document, without the need to commit or open a new searcher.  The
-       current implementation relies on the updateLog feature being enabled. -->
-  <requestHandler name="/get" class="solr.RealTimeGetHandler">
-     <lst name="defaults">
-       <str name="omitHeader">true</str>
-       <str name="wt">json</str>
-       <str name="indent">true</str>
-     </lst>
-  </requestHandler>
-
-  <requestHandler name="/update" class="solr.UpdateRequestHandler">
-  </requestHandler>
-
-  <requestHandler name="/update/json" class="solr.JsonUpdateRequestHandler">
-        <lst name="defaults">
-         <str name="stream.contentType">application/json</str>
-       </lst>
-  </requestHandler>
-
-  <requestHandler name="/update/csv" class="solr.CSVRequestHandler">
-        <lst name="defaults">
-         <str name="stream.contentType">application/csv</str>
-       </lst>
-  </requestHandler>
-
-  <requestHandler name="/update/extract" 
-                  startup="lazy"
-                  class="solr.extraction.ExtractingRequestHandler" >
-    <lst name="defaults">
-      <str name="lowernames">true</str>
-      <str name="uprefix">ignored_</str>
-
-      <!-- capture link hrefs but ignore div attributes -->
-      <str name="captureAttr">true</str>
-      <str name="fmap.a">links</str>
-      <str name="fmap.div">ignored_</str>
-    </lst>
-  </requestHandler>
-
-  <requestHandler name="/analysis/field" 
-                  startup="lazy"
-                  class="solr.FieldAnalysisRequestHandler" />
-
-  <requestHandler name="/analysis/document" 
-                  class="solr.DocumentAnalysisRequestHandler" 
-                  startup="lazy" />
-
-  <!-- ping/healthcheck -->
-  <requestHandler name="/admin/ping" class="solr.PingRequestHandler">
-    <lst name="invariants">
-      <str name="q">solrpingquery</str>
-    </lst>
-    <lst name="defaults">
-      <str name="echoParams">all</str>
-    </lst>
-  </requestHandler>
-
-  <requestHandler name="/debug/dump" class="solr.DumpRequestHandler" >
-    <lst name="defaults">
-     <str name="echoParams">explicit</str> 
-     <str name="echoHandler">true</str>
-    </lst>
-  </requestHandler>
-
-  <requestHandler name="/replication" class="solr.ReplicationHandler" > 
-  </requestHandler>
-
-  <searchComponent name="spellcheck" class="solr.SpellCheckComponent">
-
-    <str name="queryAnalyzerFieldType">textSpell</str>
-
-    <!-- Multiple "Spell Checkers" can be declared and used by this
-         component
-      -->
-
-    <!-- a spellchecker built from a field of the main index -->
-    <lst name="spellchecker">
-      <str name="name">default</str>
-      <str name="field">name</str>
-      <str name="classname">solr.DirectSolrSpellChecker</str>
-      <!-- the spellcheck distance measure used, the default is the internal levenshtein -->
-      <str name="distanceMeasure">internal</str>
-      <!-- minimum accuracy needed to be considered a valid spellcheck suggestion -->
-      <float name="accuracy">0.5</float>
-      <!-- the maximum #edits we consider when enumerating terms: can be 1 or 2 -->
-      <int name="maxEdits">2</int>
-      <!-- the minimum shared prefix when enumerating terms -->
-      <int name="minPrefix">1</int>
-      <!-- maximum number of inspections per result. -->
-      <int name="maxInspections">5</int>
-      <!-- minimum length of a query term to be considered for correction -->
-      <int name="minQueryLength">4</int>
-      <!-- maximum threshold of documents a query term can appear to be considered for correction -->
-      <float name="maxQueryFrequency">0.01</float>
-      <!-- uncomment this to require suggestions to occur in 1% of the documents
-      	<float name="thresholdTokenFrequency">.01</float>
-      -->
-    </lst>
-    
-    <!-- a spellchecker that can break or combine words.  See "/spell" handler below for usage -->
-    <lst name="spellchecker">
-      <str name="name">wordbreak</str>
-      <str name="classname">solr.WordBreakSolrSpellChecker</str>      
-      <str name="field">name</str>
-      <str name="combineWords">true</str>
-      <str name="breakWords">true</str>
-      <int name="maxChanges">10</int>
-    </lst>
-  </searchComponent>
-
-  <searchComponent name="tvComponent" class="solr.TermVectorComponent"/>
-
-  <searchComponent name="terms" class="solr.TermsComponent"/>
-
-  <searchComponent class="solr.HighlightComponent" name="highlight">
-    <highlighting>
-      <!-- Configure the standard fragmenter -->
-      <!-- This could most likely be commented out in the "default" case -->
-      <fragmenter name="gap" 
-                  default="true"
-                  class="solr.highlight.GapFragmenter">
-        <lst name="defaults">
-          <int name="hl.fragsize">100</int>
-        </lst>
-      </fragmenter>
-
-      <!-- A regular-expression-based fragmenter 
-           (for sentence extraction) 
-        -->
-      <fragmenter name="regex" 
-                  class="solr.highlight.RegexFragmenter">
-        <lst name="defaults">
-          <!-- slightly smaller fragsizes work better because of slop -->
-          <int name="hl.fragsize">70</int>
-          <!-- allow 50% slop on fragment sizes -->
-          <float name="hl.regex.slop">0.5</float>
-          <!-- a basic sentence pattern -->
-          <str name="hl.regex.pattern">[-\w ,/\n\&quot;&apos;]{20,200}</str>
-        </lst>
-      </fragmenter>
-
-      <!-- Configure the standard formatter -->
-      <formatter name="html" 
-                 default="true"
-                 class="solr.highlight.HtmlFormatter">
-        <lst name="defaults">
-          <str name="hl.simple.pre"><![CDATA[<em>]]></str>
-          <str name="hl.simple.post"><![CDATA[</em>]]></str>
-        </lst>
-      </formatter>
-
-      <!-- Configure the standard encoder -->
-      <encoder name="html" 
-               class="solr.highlight.HtmlEncoder" />
-
-      <!-- Configure the standard fragListBuilder -->
-      <fragListBuilder name="simple" 
-                       class="solr.highlight.SimpleFragListBuilder"/>
-      
-      <!-- Configure the single fragListBuilder -->
-      <fragListBuilder name="single" 
-                       class="solr.highlight.SingleFragListBuilder"/>
-      
-      <!-- Configure the weighted fragListBuilder -->
-      <fragListBuilder name="weighted" 
-                       default="true"
-                       class="solr.highlight.WeightedFragListBuilder"/>
-      
-      <!-- default tag FragmentsBuilder -->
-      <fragmentsBuilder name="default" 
-                        default="true"
-                        class="solr.highlight.ScoreOrderFragmentsBuilder">
-        <!-- 
-        <lst name="defaults">
-          <str name="hl.multiValuedSeparatorChar">/</str>
-        </lst>
-        -->
-      </fragmentsBuilder>
-
-      <!-- multi-colored tag FragmentsBuilder -->
-      <fragmentsBuilder name="colored" 
-                        class="solr.highlight.ScoreOrderFragmentsBuilder">
-        <lst name="defaults">
-          <str name="hl.tag.pre"><![CDATA[
-               <b style="background:yellow">,<b style="background:lawgreen">,
-               <b style="background:aquamarine">,<b style="background:magenta">,
-               <b style="background:palegreen">,<b style="background:coral">,
-               <b style="background:wheat">,<b style="background:khaki">,
-               <b style="background:lime">,<b style="background:deepskyblue">]]></str>
-          <str name="hl.tag.post"><![CDATA[</b>]]></str>
-        </lst>
-      </fragmentsBuilder>
-      
-      <boundaryScanner name="default" 
-                       default="true"
-                       class="solr.highlight.SimpleBoundaryScanner">
-        <lst name="defaults">
-          <str name="hl.bs.maxScan">10</str>
-          <str name="hl.bs.chars">.,!? &#9;&#10;&#13;</str>
-        </lst>
-      </boundaryScanner>
-      
-      <boundaryScanner name="breakIterator" 
-                       class="solr.highlight.BreakIteratorBoundaryScanner">
-        <lst name="defaults">
-          <!-- type should be one of CHARACTER, WORD(default), LINE and SENTENCE -->
-          <str name="hl.bs.type">WORD</str>
-          <!-- language and country are used when constructing Locale object.  -->
-          <!-- And the Locale object will be used when getting instance of BreakIterator -->
-          <str name="hl.bs.language">en</str>
-          <str name="hl.bs.country">US</str>
-        </lst>
-      </boundaryScanner>
-    </highlighting>
-  </searchComponent>
-  
-  <requestHandler class="solr.MoreLikeThisHandler" name="/mlt">
-    <lst name="defaults">
-      <str name="mlt.mintf">1</str>
-      <str name="mlt.mindf">2</str>
-    </lst>
-  </requestHandler>
-  
-  <!-- Admin Handlers - This will register all the standard admin RequestHandlers. -->
-  <requestHandler name="/admin/" class="solr.admin.AdminHandlers" />
-</config>