elasticsearch-api 7.17.11 → 9.0.2

data/lib/elasticsearch/api/actions/indices/split.rb

@@ -14,53 +14,80 @@
 # KIND, either express or implied.  See the License for the
 # specific language governing permissions and limitations
 # under the License.
-
+#
+# This code was automatically generated from the Elasticsearch Specification
+# See https://github.com/elastic/elasticsearch-specification
+# See Elasticsearch::ES_SPECIFICATION_COMMIT for commit hash.
 module Elasticsearch
   module API
     module Indices
       module Actions
-        # Allows you to split an existing index into a new index with more primary shards.
+        # Split an index.
+        # Split an index into a new index with more primary shards.
+        # * Before you can split an index:
+        # * The index must be read-only.
+        # * The cluster health status must be green.
+        # You can do make an index read-only with the following request using the add index block API:
+        # +
+        # PUT /my_source_index/_block/write
+        # +
+        # The current write index on a data stream cannot be split.
+        # In order to split the current write index, the data stream must first be rolled over so that a new write index is created and then the previous write index can be split.
+        # The number of times the index can be split (and the number of shards that each original shard can be split into) is determined by the +index.number_of_routing_shards+ setting.
+        # The number of routing shards specifies the hashing space that is used internally to distribute documents across shards with consistent hashing.
+        # For instance, a 5 shard index with +number_of_routing_shards+ set to 30 (5 x 2 x 3) could be split by a factor of 2 or 3.
+        # A split operation:
+        # * Creates a new target index with the same definition as the source index, but with a larger number of primary shards.
+        # * Hard-links segments from the source index into the target index. If the file system doesn't support hard-linking, all segments are copied into the new index, which is a much more time consuming process.
+        # * Hashes all documents again, after low level files are created, to delete documents that belong to a different shard.
+        # * Recovers the target index as though it were a closed index which had just been re-opened.
+        # IMPORTANT: Indices can only be split if they satisfy the following requirements:
+        # * The target index must not exist.
+        # * The source index must have fewer primary shards than the target index.
+        # * The number of primary shards in the target index must be a multiple of the number of primary shards in the source index.
+        # * The node handling the split process must have sufficient free disk space to accommodate a second copy of the existing index.
         #
-        # @option arguments [String] :index The name of the source index to split
-        # @option arguments [String] :target The name of the target index to split into
-        # @option arguments [Boolean] :copy_settings whether or not to copy settings from the source index (defaults to false)
-        # @option arguments [Time] :timeout Explicit operation timeout
-        # @option arguments [Time] :master_timeout Specify timeout for connection to master
-        # @option arguments [String] :wait_for_active_shards Set the number of active shards to wait for on the shrunken index before the operation returns.
+        # @option arguments [String] :index Name of the source index to split. (*Required*)
+        # @option arguments [String] :target Name of the target index to create. (*Required*)
+        # @option arguments [Time] :master_timeout Period to wait for a connection to the master node.
+        #  If no response is received before the timeout expires, the request fails and returns an error. Server default: 30s.
+        # @option arguments [Time] :timeout Period to wait for a response.
+        #  If no response is received before the timeout expires, the request fails and returns an error. Server default: 30s.
+        # @option arguments [Integer, String] :wait_for_active_shards The number of shard copies that must be active before proceeding with the operation.
+        #  Set to +all+ or any positive integer up to the total number of shards in the index (+number_of_replicas+1+). Server default: 1.
         # @option arguments [Hash] :headers Custom HTTP headers
-        # @option arguments [Hash] :body The configuration for the target index (`settings` and `aliases`)
+        # @option arguments [Hash] :body request body
         #
-        # @see https://www.elastic.co/guide/en/elasticsearch/reference/7.17/indices-split-index.html
+        # @see https://www.elastic.co/docs/api/doc/elasticsearch/v9/operation/operation-indices-split
         #
         def split(arguments = {})
+          request_opts = { endpoint: arguments[:endpoint] || 'indices.split' }
+
+          defined_params = [:index, :target].each_with_object({}) do |variable, set_variables|
+            set_variables[variable] = arguments[variable] if arguments.key?(variable)
+          end
+          request_opts[:defined_params] = defined_params unless defined_params.empty?
+
           raise ArgumentError, "Required argument 'index' missing" unless arguments[:index]
           raise ArgumentError, "Required argument 'target' missing" unless arguments[:target]
 
+          arguments = arguments.clone
           headers = arguments.delete(:headers) || {}
 
-          arguments = arguments.clone
+          body = arguments.delete(:body)
 
           _index = arguments.delete(:index)
 
           _target = arguments.delete(:target)
 
           method = Elasticsearch::API::HTTP_PUT
-          path   = "#{Utils.__listify(_index)}/_split/#{Utils.__listify(_target)}"
-          params = Utils.__validate_and_extract_params arguments, ParamsRegistry.get(__method__)
+          path   = "#{Utils.listify(_index)}/_split/#{Utils.listify(_target)}"
+          params = Utils.process_params(arguments)
 
-          body = arguments[:body]
-          perform_request(method, path, params, body, headers).body
+          Elasticsearch::API::Response.new(
+            perform_request(method, path, params, body, headers, request_opts)
+          )
         end
-
-        # Register this action with its valid params when the module is loaded.
-        #
-        # @since 6.2.0
-        ParamsRegistry.register(:split, [
-          :copy_settings,
-          :timeout,
-          :master_timeout,
-          :wait_for_active_shards
-        ].freeze)
       end
     end
   end

data/lib/elasticsearch/api/actions/indices/stats.rb

@@ -14,78 +14,73 @@
 # KIND, either express or implied.  See the License for the
 # specific language governing permissions and limitations
 # under the License.
-
+#
+# This code was automatically generated from the Elasticsearch Specification
+# See https://github.com/elastic/elasticsearch-specification
+# See Elasticsearch::ES_SPECIFICATION_COMMIT for commit hash.
 module Elasticsearch
   module API
     module Indices
       module Actions
-        # Provides statistics on operations happening in an index.
+        # Get index statistics.
+        # For data streams, the API retrieves statistics for the stream's backing indices.
+        # By default, the returned statistics are index-level with +primaries+ and +total+ aggregations.
+        # +primaries+ are the values for only the primary shards.
+        # +total+ are the accumulated values for both primary and replica shards.
+        # To get shard-level statistics, set the +level+ parameter to +shards+.
+        # NOTE: When moving to another node, the shard-level statistics for a shard are cleared.
+        # Although the shard is no longer part of the node, that node retains any node-level statistics to which the shard contributed.
         #
-        # @option arguments [List] :metric Limit the information returned the specific metrics. (options: _all, completion, docs, fielddata, query_cache, flush, get, indexing, merge, request_cache, refresh, search, segments, store, warmer, suggest)
-        # @option arguments [List] :index A comma-separated list of index names; use `_all` or empty string to perform the operation on all indices
-        # @option arguments [List] :completion_fields A comma-separated list of fields for `fielddata` and `suggest` index metric (supports wildcards)
-        # @option arguments [List] :fielddata_fields A comma-separated list of fields for `fielddata` index metric (supports wildcards)
-        # @option arguments [List] :fields A comma-separated list of fields for `fielddata` and `completion` index metric (supports wildcards)
-        # @option arguments [List] :groups A comma-separated list of search groups for `search` index metric
-        # @option arguments [String] :level Return stats aggregated at cluster, index or shard level (options: cluster, indices, shards)
-        # @option arguments [List] :types A comma-separated list of document types for the `indexing` index metric
-        # @option arguments [Boolean] :include_segment_file_sizes Whether to report the aggregated disk usage of each one of the Lucene index files (only applies if segment stats are requested)
-        # @option arguments [Boolean] :include_unloaded_segments If set to true segment stats will include stats for segments that are not currently loaded into memory
-        # @option arguments [String] :expand_wildcards Whether to expand wildcard expression to concrete indices that are open, closed or both. (options: open, closed, hidden, none, all)
-        # @option arguments [Boolean] :forbid_closed_indices If set to false stats will also collected from closed indices if explicitly specified or if expand_wildcards expands to closed indices
+        # @option arguments [String, Array<String>] :metric Limit the information returned the specific metrics.
+        # @option arguments [String, Array] :index A comma-separated list of index names; use +_all+ or empty string to perform the operation on all indices
+        # @option arguments [String, Array<String>] :completion_fields Comma-separated list or wildcard expressions of fields to include in fielddata and suggest statistics.
+        # @option arguments [String, Array<String>] :expand_wildcards Type of index that wildcard patterns can match. If the request can target data streams, this argument
+        #  determines whether wildcard expressions match hidden data streams. Supports comma-separated values,
+        #  such as +open,hidden+.
+        # @option arguments [String, Array<String>] :fielddata_fields Comma-separated list or wildcard expressions of fields to include in fielddata statistics.
+        # @option arguments [String, Array<String>] :fields Comma-separated list or wildcard expressions of fields to include in the statistics.
+        # @option arguments [Boolean] :forbid_closed_indices If true, statistics are not collected from closed indices. Server default: true.
+        # @option arguments [String] :groups Comma-separated list of search groups to include in the search statistics.
+        # @option arguments [Boolean] :include_segment_file_sizes If true, the call reports the aggregated disk usage of each one of the Lucene index files (only applies if segment stats are requested).
+        # @option arguments [Boolean] :include_unloaded_segments If true, the response includes information from segments that are not loaded into memory.
+        # @option arguments [String] :level Indicates whether statistics are aggregated at the cluster, index, or shard level.
         # @option arguments [Hash] :headers Custom HTTP headers
         #
-        # @see https://www.elastic.co/guide/en/elasticsearch/reference/7.17/indices-stats.html
+        # @see https://www.elastic.co/docs/api/doc/elasticsearch/v9/operation/operation-indices-stats
         #
         def stats(arguments = {})
-          headers = arguments.delete(:headers) || {}
+          request_opts = { endpoint: arguments[:endpoint] || 'indices.stats' }
 
-          method = HTTP_GET
-          parts  = Utils.__extract_parts arguments, ParamsRegistry.get(:stats_parts)
-          path   = Utils.__pathify Utils.__listify(arguments[:index]), '_stats', Utils.__listify(parts)
-          params = Utils.__validate_and_extract_params arguments, ParamsRegistry.get(:stats_params)
-          params[:fields] = Utils.__listify(params[:fields], :escape => false) if params[:fields]
-          params[:groups] = Utils.__listify(params[:groups], :escape => false) if params[:groups]
+          defined_params = [:metric, :index].each_with_object({}) do |variable, set_variables|
+            set_variables[variable] = arguments[variable] if arguments.key?(variable)
+          end
+          request_opts[:defined_params] = defined_params unless defined_params.empty?
+
+          arguments = arguments.clone
+          headers = arguments.delete(:headers) || {}
 
           body = nil
-          perform_request(method, path, params, body, headers).body
-        end
 
-        # Register this action with its valid params when the module is loaded.
-        #
-        # @since 6.2.0
-        ParamsRegistry.register(:stats_params, [
-          :completion_fields,
-          :fielddata_fields,
-          :fields,
-          :groups,
-          :level,
-          :types,
-          :include_segment_file_sizes,
-          :include_unloaded_segments,
-          :expand_wildcards,
-          :forbid_closed_indices
-        ].freeze)
+          _metric = arguments.delete(:metric)
+
+          _index = arguments.delete(:index)
 
-        ParamsRegistry.register(:stats_parts, [
-          :_all,
-          :completion,
-          :docs,
-          :fielddata,
-          :query_cache,
-          :flush,
-          :get,
-          :indexing,
-          :merge,
-          :request_cache,
-          :refresh,
-          :search,
-          :segments,
-          :store,
-          :warmer,
-          :suggest,
-          :metric
-        ].freeze)
+          method = Elasticsearch::API::HTTP_GET
+          path   = if _index && _metric
+                     "#{Utils.listify(_index)}/_stats/#{Utils.listify(_metric)}"
+                   elsif _metric
+                     "_stats/#{Utils.listify(_metric)}"
+                   elsif _index
+                     "#{Utils.listify(_index)}/_stats"
+                   else
+                     '_stats'
+                   end
+          params = Utils.process_params(arguments)
+
+          Elasticsearch::API::Response.new(
+            perform_request(method, path, params, body, headers, request_opts)
+          )
+        end
       end
     end
   end

data/lib/elasticsearch/api/actions/indices/update_aliases.rb

@@ -14,42 +14,44 @@
 # KIND, either express or implied.  See the License for the
 # specific language governing permissions and limitations
 # under the License.
-
+#
+# This code was automatically generated from the Elasticsearch Specification
+# See https://github.com/elastic/elasticsearch-specification
+# See Elasticsearch::ES_SPECIFICATION_COMMIT for commit hash.
 module Elasticsearch
   module API
     module Indices
       module Actions
-        # Updates index aliases.
+        # Create or update an alias.
+        # Adds a data stream or index to an alias.
         #
-        # @option arguments [Time] :timeout Request timeout
-        # @option arguments [Time] :master_timeout Specify timeout for connection to master
+        # @option arguments [Time] :master_timeout Period to wait for a connection to the master node.
+        #  If no response is received before the timeout expires, the request fails and returns an error. Server default: 30s.
+        # @option arguments [Time] :timeout Period to wait for a response.
+        #  If no response is received before the timeout expires, the request fails and returns an error. Server default: 30s.
         # @option arguments [Hash] :headers Custom HTTP headers
-        # @option arguments [Hash] :body The definition of `actions` to perform (*Required*)
+        # @option arguments [Hash] :body request body
         #
-        # @see https://www.elastic.co/guide/en/elasticsearch/reference/7.17/indices-aliases.html
+        # @see https://www.elastic.co/docs/api/doc/elasticsearch/v9/operation/operation-indices-update-aliases
         #
         def update_aliases(arguments = {})
+          request_opts = { endpoint: arguments[:endpoint] || 'indices.update_aliases' }
+
           raise ArgumentError, "Required argument 'body' missing" unless arguments[:body]
 
+          arguments = arguments.clone
           headers = arguments.delete(:headers) || {}
 
-          arguments = arguments.clone
+          body = arguments.delete(:body)
 
           method = Elasticsearch::API::HTTP_POST
-          path   = "_aliases"
-          params = Utils.__validate_and_extract_params arguments, ParamsRegistry.get(__method__)
+          path   = '_aliases'
+          params = Utils.process_params(arguments)
 
-          body = arguments[:body]
-          perform_request(method, path, params, body, headers).body
+          Elasticsearch::API::Response.new(
+            perform_request(method, path, params, body, headers, request_opts)
+          )
         end
-
-        # Register this action with its valid params when the module is loaded.
-        #
-        # @since 6.2.0
-        ParamsRegistry.register(:update_aliases, [
-          :timeout,
-          :master_timeout
-        ].freeze)
       end
     end
   end

data/lib/elasticsearch/api/actions/indices/validate_query.rb

@@ -14,82 +14,75 @@
 # KIND, either express or implied.  See the License for the
 # specific language governing permissions and limitations
 # under the License.
-
+#
+# This code was automatically generated from the Elasticsearch Specification
+# See https://github.com/elastic/elasticsearch-specification
+# See Elasticsearch::ES_SPECIFICATION_COMMIT for commit hash.
 module Elasticsearch
   module API
     module Indices
       module Actions
-        # Allows a user to validate a potentially expensive query without executing it.
+        # Validate a query.
+        # Validates a query without running it.
         #
-        # @option arguments [List] :index A comma-separated list of index names to restrict the operation; use `_all` or empty string to perform the operation on all indices
-        # @option arguments [List] :type A comma-separated list of document types to restrict the operation; leave empty to perform the operation on all types *Deprecated*
-        # @option arguments [Boolean] :explain Return detailed information about the error
-        # @option arguments [Boolean] :ignore_unavailable Whether specified concrete indices should be ignored when unavailable (missing or closed)
-        # @option arguments [Boolean] :allow_no_indices Whether to ignore if a wildcard indices expression resolves into no concrete indices. (This includes `_all` string or when no indices have been specified)
-        # @option arguments [String] :expand_wildcards Whether to expand wildcard expression to concrete indices that are open, closed or both. (options: open, closed, hidden, none, all)
-        # @option arguments [String] :q Query in the Lucene query string syntax
-        # @option arguments [String] :analyzer The analyzer to use for the query string
-        # @option arguments [Boolean] :analyze_wildcard Specify whether wildcard and prefix queries should be analyzed (default: false)
-        # @option arguments [String] :default_operator The default operator for query string query (AND or OR) (options: AND, OR)
-        # @option arguments [String] :df The field to use as default where no field prefix is given in the query string
-        # @option arguments [Boolean] :lenient Specify whether format-based query failures (such as providing text to a numeric field) should be ignored
-        # @option arguments [Boolean] :rewrite Provide a more detailed explanation showing the actual Lucene query that will be executed.
-        # @option arguments [Boolean] :all_shards Execute validation on all shards instead of one random shard per index
+        # @option arguments [String, Array] :index Comma-separated list of data streams, indices, and aliases to search.
+        #  Supports wildcards (+*+).
+        #  To search all data streams or indices, omit this parameter or use +*+ or +_all+.
+        # @option arguments [Boolean] :allow_no_indices If +false+, the request returns an error if any wildcard expression, index alias, or +_all+ value targets only missing or closed indices.
+        #  This behavior applies even if the request targets other open indices. Server default: true.
+        # @option arguments [Boolean] :all_shards If +true+, the validation is executed on all shards instead of one random shard per index.
+        # @option arguments [String] :analyzer Analyzer to use for the query string.
+        #  This parameter can only be used when the +q+ query string parameter is specified.
+        # @option arguments [Boolean] :analyze_wildcard If +true+, wildcard and prefix queries are analyzed.
+        # @option arguments [String] :default_operator The default operator for query string query: +AND+ or +OR+. Server default: OR.
+        # @option arguments [String] :df Field to use as default where no field prefix is given in the query string.
+        #  This parameter can only be used when the +q+ query string parameter is specified.
+        # @option arguments [String, Array<String>] :expand_wildcards Type of index that wildcard patterns can match.
+        #  If the request can target data streams, this argument determines whether wildcard expressions match hidden data streams.
+        #  Supports comma-separated values, such as +open,hidden+.
+        #  Valid values are: +all+, +open+, +closed+, +hidden+, +none+. Server default: open.
+        # @option arguments [Boolean] :explain If +true+, the response returns detailed information if an error has occurred.
+        # @option arguments [Boolean] :ignore_unavailable If +false+, the request returns an error if it targets a missing or closed index.
+        # @option arguments [Boolean] :lenient If +true+, format-based query failures (such as providing text to a numeric field) in the query string will be ignored.
+        # @option arguments [Boolean] :rewrite If +true+, returns a more detailed explanation showing the actual Lucene query that will be executed.
+        # @option arguments [String] :q Query in the Lucene query string syntax.
         # @option arguments [Hash] :headers Custom HTTP headers
-        # @option arguments [Hash] :body The query definition specified with the Query DSL
-        #
-        # *Deprecation notice*:
-        # Specifying types in urls has been deprecated
-        # Deprecated since version 7.0.0
+        # @option arguments [Hash] :body request body
         #
-        #
-        # @see https://www.elastic.co/guide/en/elasticsearch/reference/7.17/search-validate.html
+        # @see https://www.elastic.co/docs/api/doc/elasticsearch/v9/operation/operation-indices-validate-query
         #
         def validate_query(arguments = {})
-          headers = arguments.delete(:headers) || {}
+          request_opts = { endpoint: arguments[:endpoint] || 'indices.validate_query' }
+
+          defined_params = [:index].each_with_object({}) do |variable, set_variables|
+            set_variables[variable] = arguments[variable] if arguments.key?(variable)
+          end
+          request_opts[:defined_params] = defined_params unless defined_params.empty?
 
           arguments = arguments.clone
+          headers = arguments.delete(:headers) || {}
 
-          _index = arguments.delete(:index)
+          body = arguments.delete(:body)
 
-          _type = arguments.delete(:type)
+          _index = arguments.delete(:index)
 
-          method = if arguments[:body]
+          method = if body
                      Elasticsearch::API::HTTP_POST
                    else
                      Elasticsearch::API::HTTP_GET
                    end
 
-          path   = if _index && _type
-                     "#{Utils.__listify(_index)}/#{Utils.__listify(_type)}/_validate/query"
-                   elsif _index
-                     "#{Utils.__listify(_index)}/_validate/query"
+          path   = if _index
+                     "#{Utils.listify(_index)}/_validate/query"
                    else
-                     "_validate/query"
+                     '_validate/query'
                    end
-          params = Utils.__validate_and_extract_params arguments, ParamsRegistry.get(__method__)
+          params = Utils.process_params(arguments)
 
-          body = arguments[:body]
-          perform_request(method, path, params, body, headers).body
+          Elasticsearch::API::Response.new(
+            perform_request(method, path, params, body, headers, request_opts)
+          )
         end
-
-        # Register this action with its valid params when the module is loaded.
-        #
-        # @since 6.2.0
-        ParamsRegistry.register(:validate_query, [
-          :explain,
-          :ignore_unavailable,
-          :allow_no_indices,
-          :expand_wildcards,
-          :q,
-          :analyzer,
-          :analyze_wildcard,
-          :default_operator,
-          :df,
-          :lenient,
-          :rewrite,
-          :all_shards
-        ].freeze)
       end
     end
   end

data/lib/elasticsearch/api/actions/inference/chat_completion_unified.rb

@@ -0,0 +1,63 @@
+# Licensed to Elasticsearch B.V. under one or more contributor
+# license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright
+# ownership. Elasticsearch B.V. licenses this file to you under
+# the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+# This code was automatically generated from the Elasticsearch Specification
+# See https://github.com/elastic/elasticsearch-specification
+# See Elasticsearch::ES_SPECIFICATION_COMMIT for commit hash.
+module Elasticsearch
+  module API
+    module Inference
+      module Actions
+        # Perform chat completion inference
+        #
+        # @option arguments [String] :inference_id The inference Id (*Required*)
+        # @option arguments [Time] :timeout Specifies the amount of time to wait for the inference request to complete. Server default: 30s.
+        # @option arguments [Hash] :headers Custom HTTP headers
+        # @option arguments [Hash] :body chat_completion_request
+        #
+        # @see https://www.elastic.co/docs/api/doc/elasticsearch/v9/operation/operation-inference-unified-inference
+        #
+        def chat_completion_unified(arguments = {})
+          request_opts = { endpoint: arguments[:endpoint] || 'inference.chat_completion_unified' }
+
+          defined_params = [:inference_id].each_with_object({}) do |variable, set_variables|
+            set_variables[variable] = arguments[variable] if arguments.key?(variable)
+          end
+          request_opts[:defined_params] = defined_params unless defined_params.empty?
+
+          raise ArgumentError, "Required argument 'body' missing" unless arguments[:body]
+          raise ArgumentError, "Required argument 'inference_id' missing" unless arguments[:inference_id]
+
+          arguments = arguments.clone
+          headers = arguments.delete(:headers) || {}
+
+          body = arguments.delete(:body)
+
+          _inference_id = arguments.delete(:inference_id)
+
+          method = Elasticsearch::API::HTTP_POST
+          path   = "_inference/chat_completion/#{Utils.listify(_inference_id)}/_stream"
+          params = Utils.process_params(arguments)
+
+          Elasticsearch::API::Response.new(
+            perform_request(method, path, params, body, headers, request_opts)
+          )
+        end
+      end
+    end
+  end
+end

data/lib/elasticsearch/api/actions/inference/completion.rb

@@ -0,0 +1,62 @@
+# Licensed to Elasticsearch B.V. under one or more contributor
+# license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright
+# ownership. Elasticsearch B.V. licenses this file to you under
+# the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+# This code was automatically generated from the Elasticsearch Specification
+# See https://github.com/elastic/elasticsearch-specification
+# See Elasticsearch::ES_SPECIFICATION_COMMIT for commit hash.
+module Elasticsearch
+  module API
+    module Inference
+      module Actions
+        # Perform completion inference on the service
+        #
+        # @option arguments [String] :inference_id The inference Id (*Required*)
+        # @option arguments [Time] :timeout Specifies the amount of time to wait for the inference request to complete. Server default: 30s.
+        # @option arguments [Hash] :headers Custom HTTP headers
+        # @option arguments [Hash] :body request body
+        #
+        # @see https://www.elastic.co/docs/api/doc/elasticsearch/v9/operation/operation-inference-inference
+        #
+        def completion(arguments = {})
+          request_opts = { endpoint: arguments[:endpoint] || 'inference.completion' }
+
+          defined_params = [:inference_id].each_with_object({}) do |variable, set_variables|
+            set_variables[variable] = arguments[variable] if arguments.key?(variable)
+          end
+          request_opts[:defined_params] = defined_params unless defined_params.empty?
+
+          raise ArgumentError, "Required argument 'inference_id' missing" unless arguments[:inference_id]
+
+          arguments = arguments.clone
+          headers = arguments.delete(:headers) || {}
+
+          body = arguments.delete(:body)
+
+          _inference_id = arguments.delete(:inference_id)
+
+          method = Elasticsearch::API::HTTP_POST
+          path   = "_inference/completion/#{Utils.listify(_inference_id)}"
+          params = Utils.process_params(arguments)
+
+          Elasticsearch::API::Response.new(
+            perform_request(method, path, params, body, headers, request_opts)
+          )
+        end
+      end
+    end
+  end
+end

data/lib/elasticsearch/api/actions/inference/delete.rb

@@ -0,0 +1,69 @@
+# Licensed to Elasticsearch B.V. under one or more contributor
+# license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright
+# ownership. Elasticsearch B.V. licenses this file to you under
+# the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+# This code was automatically generated from the Elasticsearch Specification
+# See https://github.com/elastic/elasticsearch-specification
+# See Elasticsearch::ES_SPECIFICATION_COMMIT for commit hash.
+module Elasticsearch
+  module API
+    module Inference
+      module Actions
+        # Delete an inference endpoint
+        #
+        # @option arguments [String] :task_type The task type
+        # @option arguments [String] :inference_id The inference identifier. (*Required*)
+        # @option arguments [Boolean] :dry_run When true, the endpoint is not deleted and a list of ingest processors which reference this endpoint is returned.
+        # @option arguments [Boolean] :force When true, the inference endpoint is forcefully deleted even if it is still being used by ingest processors or semantic text fields.
+        # @option arguments [Hash] :headers Custom HTTP headers
+        #
+        # @see https://www.elastic.co/docs/api/doc/elasticsearch/v9/operation/operation-inference-delete
+        #
+        def delete(arguments = {})
+          request_opts = { endpoint: arguments[:endpoint] || 'inference.delete' }
+
+          defined_params = [:inference_id, :task_type].each_with_object({}) do |variable, set_variables|
+            set_variables[variable] = arguments[variable] if arguments.key?(variable)
+          end
+          request_opts[:defined_params] = defined_params unless defined_params.empty?
+
+          raise ArgumentError, "Required argument 'inference_id' missing" unless arguments[:inference_id]
+
+          arguments = arguments.clone
+          headers = arguments.delete(:headers) || {}
+
+          body = nil
+
+          _task_type = arguments.delete(:task_type)
+
+          _inference_id = arguments.delete(:inference_id)
+
+          method = Elasticsearch::API::HTTP_DELETE
+          path   = if _task_type && _inference_id
+                     "_inference/#{Utils.listify(_task_type)}/#{Utils.listify(_inference_id)}"
+                   else
+                     "_inference/#{Utils.listify(_inference_id)}"
+                   end
+          params = Utils.process_params(arguments)
+
+          Elasticsearch::API::Response.new(
+            perform_request(method, path, params, body, headers, request_opts)
+          )
+        end
+      end
+    end
+  end
+end