dwolla_swagger 1.0.6 → 1.0.7

data/vendor/bundle/ruby/2.2.0/gems/rspec-core-3.4.1/lib/rspec/core/project_initializer/spec/spec_helper.rb

@@ -1,96 +0,0 @@
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# The `.rspec` file also contains a few flags that are not defaults but that
-# users commonly want.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-# The settings below are suggested to provide a good initial experience
-# with RSpec, but feel free to customize to your heart's content.
-=begin
-  # These two settings work together to allow you to limit a spec run
-  # to individual examples or groups you care about by tagging them with
-  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
-  # get run.
-  config.filter_run :focus
-  config.run_all_when_everything_filtered = true
-
-  # Allows RSpec to persist some state between runs in order to support
-  # the `--only-failures` and `--next-failure` CLI options. We recommend
-  # you configure your source control system to ignore this file.
-  config.example_status_persistence_file_path = "spec/examples.txt"
-
-  # Limits the available syntax to the non-monkey patched syntax that is
-  # recommended. For more details, see:
-  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  config.disable_monkey_patching!
-
-  # This setting enables warnings. It's recommended, but in some cases may
-  # be too noisy due to issues in dependencies.
-  config.warnings = true
-
-  # Many RSpec users commonly either run the entire suite or an individual
-  # file, and it's useful to allow more verbose output when running an
-  # individual spec file.
-  if config.files_to_run.one?
-    # Use the documentation formatter for detailed output,
-    # unless a formatter has already been configured
-    # (e.g. via a command-line flag).
-    config.default_formatter = 'doc'
-  end
-
-  # Print the 10 slowest examples and example groups at the
-  # end of the spec run, to help surface which specs are running
-  # particularly slow.
-  config.profile_examples = 10
-
-  # Run specs in random order to surface order dependencies. If you find an
-  # order dependency and want to debug it, you can fix the order by providing
-  # the seed, which is printed after each run.
-  #     --seed 1234
-  config.order = :random
-
-  # Seed global randomization in this process using the `--seed` CLI option.
-  # Setting this allows you to use `--seed` to deterministically reproduce
-  # test failures related to randomization by passing the same `--seed` value
-  # as the one that triggered the failure.
-  Kernel.srand config.seed
-=end
-end

data/vendor/bundle/ruby/2.2.0/gems/rspec-core-3.4.1/lib/rspec/core/project_initializer.rb

@@ -1,48 +0,0 @@
-RSpec::Support.require_rspec_support "directory_maker"
-
-module RSpec
-  module Core
-    # @private
-    # Generates conventional files for an RSpec project.
-    class ProjectInitializer
-      attr_reader :destination, :stream, :template_path
-
-      DOT_RSPEC_FILE = '.rspec'
-      SPEC_HELPER_FILE =  'spec/spec_helper.rb'
-
-      def initialize(opts={})
-        @destination = opts.fetch(:destination, Dir.getwd)
-        @stream = opts.fetch(:report_stream, $stdout)
-        @template_path = opts.fetch(:template_path) do
-          File.expand_path("../project_initializer", __FILE__)
-        end
-      end
-
-      def run
-        copy_template DOT_RSPEC_FILE
-        copy_template SPEC_HELPER_FILE
-      end
-
-    private
-
-      def copy_template(file)
-        destination_file = File.join(destination, file)
-        return report_exists(file) if File.exist?(destination_file)
-
-        report_creating(file)
-        RSpec::Support::DirectoryMaker.mkdir_p(File.dirname(destination_file))
-        File.open(destination_file, 'w') do |f|
-          f.write File.read(File.join(template_path, file))
-        end
-      end
-
-      def report_exists(file)
-        stream.puts "   exist   #{file}"
-      end
-
-      def report_creating(file)
-        stream.puts "  create   #{file}"
-      end
-    end
-  end
-end

data/vendor/bundle/ruby/2.2.0/gems/rspec-core-3.4.1/lib/rspec/core/rake_task.rb

@@ -1,167 +0,0 @@
-require 'rake'
-require 'rake/tasklib'
-require 'rspec/support'
-
-RSpec::Support.require_rspec_support "ruby_features"
-
-# :nocov:
-unless RSpec::Support.respond_to?(:require_rspec_core)
-  RSpec::Support.define_optimized_require_for_rspec(:core) { |f| require_relative "../#{f}" }
-end
-# :nocov:
-
-RSpec::Support.require_rspec_core "shell_escape"
-
-module RSpec
-  module Core
-    # RSpec rake task
-    #
-    # @see Rakefile
-    class RakeTask < ::Rake::TaskLib
-      include ::Rake::DSL if defined?(::Rake::DSL)
-      include RSpec::Core::ShellEscape
-
-      # Default path to the RSpec executable.
-      DEFAULT_RSPEC_PATH = File.expand_path('../../../../exe/rspec', __FILE__)
-
-      # Default pattern for spec files.
-      DEFAULT_PATTERN = 'spec/**{,/*/**}/*_spec.rb'
-
-      # Name of task. Defaults to `:spec`.
-      attr_accessor :name
-
-      # Files matching this pattern will be loaded.
-      # Defaults to `'spec/**{,/*/**}/*_spec.rb'`.
-      attr_accessor :pattern
-
-      # Files matching this pattern will be excluded.
-      # Defaults to `nil`.
-      attr_accessor :exclude_pattern
-
-      # Whether or not to fail Rake when an error occurs (typically when
-      # examples fail). Defaults to `true`.
-      attr_accessor :fail_on_error
-
-      # A message to print to stderr when there are failures.
-      attr_accessor :failure_message
-
-      # Use verbose output. If this is set to true, the task will print the
-      # executed spec command to stdout. Defaults to `true`.
-      attr_accessor :verbose
-
-      # Command line options to pass to ruby. Defaults to `nil`.
-      attr_accessor :ruby_opts
-
-      # Path to RSpec. Defaults to the absolute path to the
-      # rspec binary from the loaded rspec-core gem.
-      attr_accessor :rspec_path
-
-      # Command line options to pass to RSpec. Defaults to `nil`.
-      attr_accessor :rspec_opts
-
-      def initialize(*args, &task_block)
-        @name          = args.shift || :spec
-        @ruby_opts     = nil
-        @rspec_opts    = nil
-        @verbose       = true
-        @fail_on_error = true
-        @rspec_path    = DEFAULT_RSPEC_PATH
-        @pattern       = DEFAULT_PATTERN
-
-        define(args, &task_block)
-      end
-
-      # @private
-      def run_task(verbose)
-        command = spec_command
-        puts command if verbose
-
-        return if system(command)
-        puts failure_message if failure_message
-
-        return unless fail_on_error
-        $stderr.puts "#{command} failed" if verbose
-        exit $?.exitstatus
-      end
-
-    private
-
-      # @private
-      def define(args, &task_block)
-        desc "Run RSpec code examples" unless ::Rake.application.last_comment
-
-        task name, *args do |_, task_args|
-          RakeFileUtils.__send__(:verbose, verbose) do
-            task_block.call(*[self, task_args].slice(0, task_block.arity)) if task_block
-            run_task verbose
-          end
-        end
-      end
-
-      def file_inclusion_specification
-        if ENV['SPEC']
-          FileList[ENV['SPEC']].sort
-        elsif String === pattern && !File.exist?(pattern)
-          "--pattern #{escape pattern}"
-        else
-          # Before RSpec 3.1, we used `FileList` to get the list of matched
-          # files, and then pass that along to the `rspec` command. Starting
-          # with 3.1, we prefer to pass along the pattern as-is to the `rspec`
-          # command, for 3 reasons:
-          #
-          #   * It's *much* less verbose to pass one `--pattern` option than a
-          #     long list of files.
-          #   * It ensures `task.pattern` and `--pattern` have the same
-          #     behavior.
-          #   * It fixes a bug, where
-          #     `task.pattern = pattern_that_matches_no_files` would run *all*
-          #     files because it would cause no pattern or file args to get
-          #     passed to `rspec`, which causes all files to get run.
-          #
-          # However, `FileList` is *far* more flexible than the `--pattern`
-          # option. Specifically, it supports individual files and directories,
-          # as well as arrays of files, directories and globs, as well as other
-          # `FileList` objects.
-          #
-          # For backwards compatibility, we have to fall back to using FileList
-          # if the user has passed a `pattern` option that will not work with
-          # `--pattern`.
-          #
-          # TODO: consider deprecating support for this and removing it in
-          #   RSpec 4.
-          FileList[pattern].sort.map { |file| escape file }
-        end
-      end
-
-      def file_exclusion_specification
-        " --exclude-pattern #{escape exclude_pattern}" if exclude_pattern
-      end
-
-      def spec_command
-        cmd_parts = []
-        cmd_parts << RUBY
-        cmd_parts << ruby_opts
-        cmd_parts << rspec_load_path
-        cmd_parts << escape(rspec_path)
-        cmd_parts << file_inclusion_specification
-        cmd_parts << file_exclusion_specification
-        cmd_parts << rspec_opts
-        cmd_parts.flatten.reject(&blank).join(" ")
-      end
-
-      def blank
-        lambda { |s| s.nil? || s == "" }
-      end
-
-      def rspec_load_path
-        @rspec_load_path ||= begin
-          core_and_support = $LOAD_PATH.grep(
-            /#{File::SEPARATOR}rspec-(core|support)[^#{File::SEPARATOR}]*#{File::SEPARATOR}lib/
-          ).uniq
-
-          "-I#{core_and_support.map { |file| escape file }.join(File::PATH_SEPARATOR)}"
-        end
-      end
-    end
-  end
-end

data/vendor/bundle/ruby/2.2.0/gems/rspec-core-3.4.1/lib/rspec/core/reporter.rb

@@ -1,236 +0,0 @@
-module RSpec::Core
-  # A reporter will send notifications to listeners, usually formatters for the
-  # spec suite run.
-  class Reporter
-    # @private
-    RSPEC_NOTIFICATIONS = Set.new(
-      [
-        :close, :deprecation, :deprecation_summary, :dump_failures, :dump_pending,
-        :dump_profile, :dump_summary, :example_failed, :example_group_finished,
-        :example_group_started, :example_passed, :example_pending, :example_started,
-        :message, :seed, :start, :start_dump, :stop, :example_finished
-      ])
-
-    def initialize(configuration)
-      @configuration = configuration
-      @listeners = Hash.new { |h, k| h[k] = Set.new }
-      @examples = []
-      @failed_examples = []
-      @pending_examples = []
-      @duration = @start = @load_time = nil
-    end
-
-    # @private
-    attr_reader :examples, :failed_examples, :pending_examples
-
-    # @private
-    def reset
-      @examples = []
-      @failed_examples = []
-      @pending_examples = []
-      @profiler = Profiler.new if defined?(@profiler)
-    end
-
-    # @private
-    def setup_profiler
-      @profiler = Profiler.new
-      register_listener @profiler, *Profiler::NOTIFICATIONS
-    end
-
-    # Registers a listener to a list of notifications. The reporter will send
-    # notification of events to all registered listeners.
-    #
-    # @param listener [Object] An obect that wishes to be notified of reporter
-    #   events
-    # @param notifications [Array] Array of symbols represents the events a
-    #   listener wishes to subscribe too
-    def register_listener(listener, *notifications)
-      notifications.each do |notification|
-        @listeners[notification.to_sym] << listener
-      end
-      true
-    end
-
-    # @private
-    def registered_listeners(notification)
-      @listeners[notification].to_a
-    end
-
-    # @overload report(count, &block)
-    # @overload report(count, &block)
-    # @param expected_example_count [Integer] the number of examples being run
-    # @yield [Block] block yields itself for further reporting.
-    #
-    # Initializes the report run and yields itself for further reporting. The
-    # block is required, so that the reporter can manage cleaning up after the
-    # run.
-    #
-    # @example
-    #
-    #     reporter.report(group.examples.size) do |r|
-    #       example_groups.map {|g| g.run(r) }
-    #     end
-    #
-    def report(expected_example_count)
-      start(expected_example_count)
-      begin
-        yield self
-      ensure
-        finish
-      end
-    end
-
-    # @private
-    def start(expected_example_count, time=RSpec::Core::Time.now)
-      @start = time
-      @load_time = (@start - @configuration.start_time).to_f
-      notify :seed, Notifications::SeedNotification.new(@configuration.seed, seed_used?)
-      notify :start, Notifications::StartNotification.new(expected_example_count, @load_time)
-    end
-
-    # @param message [#to_s] A message object to send to formatters
-    #
-    # Send a custom message to supporting formatters.
-    def message(message)
-      notify :message, Notifications::MessageNotification.new(message)
-    end
-
-    # @param event [Symbol] Name of the custom event to trigger on formatters
-    # @param options [Hash] Hash of arguments to provide via `CustomNotification`
-    #
-    # Publish a custom event to supporting registered formatters.
-    # @see RSpec::Core::Notifications::CustomNotification
-    def publish(event, options={})
-      if RSPEC_NOTIFICATIONS.include? event
-        raise "RSpec::Core::Reporter#publish is intended for sending custom " \
-              "events not internal RSpec ones, please rename your custom event."
-      end
-      notify event, Notifications::CustomNotification.for(options)
-    end
-
-    # @private
-    def example_group_started(group)
-      notify :example_group_started, Notifications::GroupNotification.new(group) unless group.descendant_filtered_examples.empty?
-    end
-
-    # @private
-    def example_group_finished(group)
-      notify :example_group_finished, Notifications::GroupNotification.new(group) unless group.descendant_filtered_examples.empty?
-    end
-
-    # @private
-    def example_started(example)
-      @examples << example
-      notify :example_started, Notifications::ExampleNotification.for(example)
-    end
-
-    # @private
-    def example_finished(example)
-      notify :example_finished, Notifications::ExampleNotification.for(example)
-    end
-
-    # @private
-    def example_passed(example)
-      notify :example_passed, Notifications::ExampleNotification.for(example)
-    end
-
-    # @private
-    def example_failed(example)
-      @failed_examples << example
-      notify :example_failed, Notifications::ExampleNotification.for(example)
-    end
-
-    # @private
-    def example_pending(example)
-      @pending_examples << example
-      notify :example_pending, Notifications::ExampleNotification.for(example)
-    end
-
-    # @private
-    def deprecation(hash)
-      notify :deprecation, Notifications::DeprecationNotification.from_hash(hash)
-    end
-
-    # @private
-    def finish
-      close_after do
-        stop
-        notify :start_dump,    Notifications::NullNotification
-        notify :dump_pending,  Notifications::ExamplesNotification.new(self)
-        notify :dump_failures, Notifications::ExamplesNotification.new(self)
-        notify :deprecation_summary, Notifications::NullNotification
-        unless mute_profile_output?
-          notify :dump_profile, Notifications::ProfileNotification.new(@duration, @examples,
-                                                                       @configuration.profile_examples,
-                                                                       @profiler.example_groups)
-        end
-        notify :dump_summary, Notifications::SummaryNotification.new(@duration, @examples, @failed_examples,
-                                                                     @pending_examples, @load_time)
-        notify :seed, Notifications::SeedNotification.new(@configuration.seed, seed_used?)
-      end
-    end
-
-    # @private
-    def close_after
-      yield
-    ensure
-      close
-    end
-
-    # @private
-    def stop
-      @duration = (RSpec::Core::Time.now - @start).to_f if @start
-      notify :stop, Notifications::ExamplesNotification.new(self)
-    end
-
-    # @private
-    def notify(event, notification)
-      registered_listeners(event).each do |formatter|
-        formatter.__send__(event, notification)
-      end
-    end
-
-    # @private
-    def abort_with(msg, exit_status)
-      message(msg)
-      close
-      exit!(exit_status)
-    end
-
-    # @private
-    def fail_fast_limit_met?
-      return false unless (fail_fast = @configuration.fail_fast)
-
-      if fail_fast == true
-        @failed_examples.any?
-      else
-        fail_fast <= @failed_examples.size
-      end
-    end
-
-  private
-
-    def close
-      notify :close, Notifications::NullNotification
-    end
-
-    def mute_profile_output?
-      # Don't print out profiled info if there are failures and `--fail-fast` is
-      # used, it just clutters the output.
-      !@configuration.profile_examples? || fail_fast_limit_met?
-    end
-
-    def seed_used?
-      @configuration.seed && @configuration.seed_used?
-    end
-  end
-
-  # @private
-  # # Used in place of a {Reporter} for situations where we don't want reporting output.
-  class NullReporter
-    def self.method_missing(*)
-      # ignore
-    end
-    private_class_method :method_missing
-  end
-end

data/vendor/bundle/ruby/2.2.0/gems/rspec-core-3.4.1/lib/rspec/core/ruby_project.rb

@@ -1,53 +0,0 @@
-# This is borrowed (slightly modified) from Scott Taylor's
-# project_path project:
-#   http://github.com/smtlaissezfaire/project_path
-module RSpec
-  module Core
-    # @private
-    module RubyProject
-      def add_to_load_path(*dirs)
-        dirs.each { |dir| add_dir_to_load_path(File.join(root, dir)) }
-      end
-
-      def add_dir_to_load_path(dir)
-        $LOAD_PATH.unshift(dir) unless $LOAD_PATH.include?(dir)
-      end
-
-      def root
-        @project_root ||= determine_root
-      end
-
-      def determine_root
-        find_first_parent_containing('spec') || '.'
-      end
-
-      def find_first_parent_containing(dir)
-        ascend_until { |path| File.exist?(File.join(path, dir)) }
-      end
-
-      def ascend_until
-        fs = File::SEPARATOR
-        escaped_slash = "\\#{fs}"
-        special = "_RSPEC_ESCAPED_SLASH_"
-        project_path = File.expand_path(".")
-        parts = project_path.gsub(escaped_slash, special).squeeze(fs).split(fs).map do |x|
-          x.gsub(special, escaped_slash)
-        end
-
-        until parts.empty?
-          path = parts.join(fs)
-          path = fs if path == ""
-          return path if yield(path)
-          parts.pop
-        end
-      end
-
-      module_function :add_to_load_path
-      module_function :add_dir_to_load_path
-      module_function :root
-      module_function :determine_root
-      module_function :find_first_parent_containing
-      module_function :ascend_until
-    end
-  end
-end