droom 0.4.3 → 0.5.3

data/spec/dummy/solr/conf/protwords.txt

@@ -1,21 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#-----------------------------------------------------------------------
-# Use a protected word file to protect against the stemmer reducing two
-# unrelated words to the same base word.
-
-# Some non-words that normally won't be encountered,
-# just to test that they won't be stemmed.
-dontstems
-zwhacky
-

data/spec/dummy/solr/conf/schema.xml

@@ -1,238 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<!--  
- This is the Solr schema file. This file should be named "schema.xml" and
- should be in the conf directory under the solr home
- (i.e. ./solr/conf/schema.xml by default) 
- or located where the classloader for the Solr webapp can find it.
-
- This example schema is the recommended starting point for users.
- It should be kept correct and concise, usable out-of-the-box.
-
- For more information, on how to customize this file, please see
- http://wiki.apache.org/solr/SchemaXml
-
- PERFORMANCE NOTE: this schema includes many optional features and should not
- be used for benchmarking.  To improve performance one could
-  - set stored="false" for all fields possible (esp large fields) when you
-    only need to search on the field but don't need to return the original
-    value.
-  - set indexed="false" if you don't need to search on the field, but only
-    return the field as a result of searching on other indexed fields.
-  - remove all unneeded copyField statements
-  - for best index size and searching performance, set "index" to false
-    for all general text fields, use copyField to copy them to the
-    catchall "text" field, and use that for searching.
-  - For maximum indexing performance, use the StreamingUpdateSolrServer
-    java client.
-  - Remember to run the JVM in server mode, and use a higher logging level
-    that avoids logging every request
--->
-<schema name="sunspot" version="1.0">
-  <types>
-    <!-- field type definitions. The "name" attribute is
-       just a label to be used by field definitions.  The "class"
-       attribute and any other attributes determine the real
-       behavior of the fieldType.
-         Class names starting with "solr" refer to java classes in the
-       org.apache.solr.analysis package.
-    -->
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="string" class="solr.StrField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tdouble" class="solr.TrieDoubleField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="rand" class="solr.RandomSortField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="text" class="solr.TextField" omitNorms="false">
-      <analyzer>
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.StandardFilterFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-    </fieldType>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="boolean" class="solr.BoolField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="date" class="solr.DateField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="sdouble" class="solr.SortableDoubleField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="sfloat" class="solr.SortableFloatField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="sint" class="solr.SortableIntField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="slong" class="solr.SortableLongField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tint" class="solr.TrieIntField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tfloat" class="solr.TrieFloatField" omitNorms="true"/>
-    <!-- *** This fieldType is used by Sunspot! *** -->
-    <fieldType name="tdate" class="solr.TrieDateField" omitNorms="true"/>
-  </types>
-  <fields>
-    <!-- Valid attributes for fields:
-     name: mandatory - the name for the field
-     type: mandatory - the name of a previously defined type from the 
-       <types> section
-     indexed: true if this field should be indexed (searchable or sortable)
-     stored: true if this field should be retrievable
-     compressed: [false] if this field should be stored using gzip compression
-       (this will only apply if the field type is compressable; among
-       the standard field types, only TextField and StrField are)
-     multiValued: true if this field may contain multiple values per document
-     omitNorms: (expert) set to true to omit the norms associated with
-       this field (this disables length normalization and index-time
-       boosting for the field, and saves some memory).  Only full-text
-       fields or fields that need an index-time boost need norms.
-     termVectors: [false] set to true to store the term vector for a
-       given field.
-       When using MoreLikeThis, fields used for similarity should be
-       stored for best performance.
-     termPositions: Store position information with the term vector.  
-       This will increase storage costs.
-     termOffsets: Store offset information with the term vector. This 
-       will increase storage costs.
-     default: a value that should be used if no value is specified
-       when adding a document.
-   -->
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="id" stored="true" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="type" stored="false" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="class_name" stored="false" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="text" stored="false" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="lat" stored="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This field is used by Sunspot! *** -->
-    <field name="lng" stored="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="random_*" stored="false" type="rand" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="_local*" stored="false" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_text" stored="false" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_texts" stored="true" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_b" stored="false" type="boolean" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_bm" stored="false" type="boolean" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_bs" stored="true" type="boolean" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_bms" stored="true" type="boolean" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_d" stored="false" type="date" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dm" stored="false" type="date" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ds" stored="true" type="date" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dms" stored="true" type="date" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_e" stored="false" type="sdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_em" stored="false" type="sdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_es" stored="true" type="sdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ems" stored="true" type="sdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_f" stored="false" type="sfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fm" stored="false" type="sfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fs" stored="true" type="sfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fms" stored="true" type="sfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_i" stored="false" type="sint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_im" stored="false" type="sint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_is" stored="true" type="sint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ims" stored="true" type="sint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_l" stored="false" type="slong" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_lm" stored="false" type="slong" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ls" stored="true" type="slong" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_lms" stored="true" type="slong" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_s" stored="false" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_sm" stored="false" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ss" stored="true" type="string" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_sms" stored="true" type="string" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_it" stored="false" type="tint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_itm" stored="false" type="tint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_its" stored="true" type="tint" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_itms" stored="true" type="tint" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ft" stored="false" type="tfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ftm" stored="false" type="tfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_fts" stored="true" type="tfloat" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ftms" stored="true" type="tfloat" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dt" stored="false" type="tdate" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dtm" stored="false" type="tdate" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dts" stored="true" type="tdate" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_dtms" stored="true" type="tdate" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_textv" stored="false" termVectors="true" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_textsv" stored="true" termVectors="true" type="text" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_et" stored="false" termVectors="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_etm" stored="false" termVectors="true" type="tdouble" multiValued="true" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_ets" stored="true" termVectors="true" type="tdouble" multiValued="false" indexed="true"/>
-    <!-- *** This dynamicField is used by Sunspot! *** -->
-    <dynamicField name="*_etms" stored="true" termVectors="true" type="tdouble" multiValued="true" indexed="true"/>
-  </fields>
-  <!-- Field to use to determine and enforce document uniqueness. 
-      Unless this field is marked with required="false", it will be a required field
-   -->
-  <uniqueKey>id</uniqueKey>
-  <!-- field for the QueryParser to use when an explicit fieldname is absent -->
-  <defaultSearchField>text</defaultSearchField>
-  <!-- SolrQueryParser configuration: defaultOperator="AND|OR" -->
-  <solrQueryParser defaultOperator="AND"/>
-  <!-- copyField commands copy one field to another at the time a document
-        is added to the index.  It's used either to index the same field differently,
-        or to add multiple fields to the same field for easier/faster searching.  -->
-</schema>

data/spec/dummy/solr/conf/scripts.conf

@@ -1,24 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-user=
-solr_hostname=localhost
-solr_port=8983
-rsyncd_port=18983
-data_dir=
-webapp_name=solr
-master_host=
-master_data_dir=
-master_status_dir=

data/spec/dummy/solr/conf/solrconfig.xml

@@ -1,934 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<!-- 
-     For more details about configurations options that may appear in this 
-     file, see http://wiki.apache.org/solr/SolrConfigXml.
-
-     Specifically, the Solr Config can support XInclude, which may make it easier to manage
-     the configuration.  See https://issues.apache.org/jira/browse/SOLR-1167
--->
-<config>
-  <!-- Set this to 'false' if you want solr to continue working after it has 
-       encountered an severe configuration error.  In a production environment, 
-       you may want solr to keep working even if one handler is mis-configured.
-
-       You may also set this to false using by setting the system property:
-         -Dsolr.abortOnConfigurationError=false
-     -->
-  <abortOnConfigurationError>${solr.abortOnConfigurationError:true}</abortOnConfigurationError>
-  <!-- lib directives can be used to instruct Solr to load an Jars identified
-       and use them to resolve any "plugins" specified in your solrconfig.xml or
-       schema.xml (ie: Analyzers, Request Handlers, etc...).
-
-       All directories and paths are resolved relative the instanceDir.
-
-       If a "./lib" directory exists in your instanceDir, all files found in it
-       are included as if you had used the following syntax...
-       
-              <lib dir="./lib" />
-    -->
-  <!-- A dir option by itself adds any files found in the directory to the
-       classpath, this is useful for including all jars in a directory.
-    -->
-  <lib dir="../../contrib/extraction/lib"/>
-  <!-- When a regex is specified in addition to a directory, only the files in that
-       directory which completely match the regex (anchored on both ends)
-       will be included.
-    -->
-  <lib dir="../../dist/" regex="apache-solr-cell-\d.*\.jar"/>
-  <lib dir="../../dist/" regex="apache-solr-clustering-\d.*\.jar"/>
-  <!-- If a dir option (with or without a regex) is used and nothing is found
-       that matches, it will be ignored
-    -->
-  <lib dir="../../contrib/clustering/lib/downloads/"/>
-  <lib dir="../../contrib/clustering/lib/"/>
-  <lib dir="/total/crap/dir/ignored"/>
-  <!-- an exact path can be used to specify a specific file.  This will cause
-       a serious error to be logged if it can't be loaded.
-  <lib path="../a-jar-that-does-not-exist.jar" /> 
-  -->
-  <!-- Used to specify an alternate directory to hold all index data
-       other than the default ./data under the Solr home.
-       If replication is in use, this should match the replication configuration. -->
-  <dataDir>${solr.data.dir:./solr/data}</dataDir>
-  <!-- WARNING: this <indexDefaults> section only provides defaults for index writers
-       in general. See also the <mainIndex> section after that when changing parameters
-       for Solr's main Lucene index. -->
-  <indexDefaults>
-    <!-- Values here affect all index writers and act as a default unless overridden. -->
-    <useCompoundFile>false</useCompoundFile>
-    <mergeFactor>10</mergeFactor>
-    <!-- If both ramBufferSizeMB and maxBufferedDocs is set, then Lucene will flush
-     based on whichever limit is hit first.  -->
-    <!--<maxBufferedDocs>1000</maxBufferedDocs>-->
-    <!-- Sets the amount of RAM that may be used by Lucene indexing
-      for buffering added documents and deletions before they are
-      flushed to the Directory.  -->
-    <ramBufferSizeMB>32</ramBufferSizeMB>
-    <!-- <maxMergeDocs>2147483647</maxMergeDocs> -->
-    <maxFieldLength>10000</maxFieldLength>
-    <writeLockTimeout>1000</writeLockTimeout>
-    <commitLockTimeout>10000</commitLockTimeout>
-    <!--
-     Expert: Turn on Lucene's auto commit capability.  This causes intermediate
-     segment flushes to write a new lucene index descriptor, enabling it to be
-     opened by an external IndexReader.  This can greatly slow down indexing
-     speed.  NOTE: Despite the name, this value does not have any relation to
-     Solr's autoCommit functionality
-     -->
-    <!--<luceneAutoCommit>false</luceneAutoCommit>-->
-    <!--
-     Expert: The Merge Policy in Lucene controls how merging is handled by
-     Lucene.  The default in 2.3 is the LogByteSizeMergePolicy, previous
-     versions used LogDocMergePolicy.
-
-     LogByteSizeMergePolicy chooses segments to merge based on their size.  The
-     Lucene 2.2 default, LogDocMergePolicy chose when to merge based on number
-     of documents
-
-     Other implementations of MergePolicy must have a no-argument constructor
-     -->
-    <!--<mergePolicy class="org.apache.lucene.index.LogByteSizeMergePolicy"/>-->
-    <!--
-     Expert:
-     The Merge Scheduler in Lucene controls how merges are performed.  The
-     ConcurrentMergeScheduler (Lucene 2.3 default) can perform merges in the
-     background using separate threads.  The SerialMergeScheduler (Lucene 2.2
-     default) does not.
-     -->
-    <!--<mergeScheduler class="org.apache.lucene.index.ConcurrentMergeScheduler"/>-->
-    <!--
-      This option specifies which Lucene LockFactory implementation to use.
-      
-      single = SingleInstanceLockFactory - suggested for a read-only index
-               or when there is no possibility of another process trying
-               to modify the index.
-      native = NativeFSLockFactory  - uses OS native file locking
-      simple = SimpleFSLockFactory  - uses a plain file for locking
-
-      (For backwards compatibility with Solr 1.2, 'simple' is the default
-       if not specified.)
-    -->
-    <lockType>native</lockType>
-    <!--
-     Expert:
-    Controls how often Lucene loads terms into memory -->
-    <!--<termIndexInterval>256</termIndexInterval>-->
-  </indexDefaults>
-  <mainIndex>
-    <!-- options specific to the main on-disk lucene index -->
-    <useCompoundFile>false</useCompoundFile>
-    <ramBufferSizeMB>32</ramBufferSizeMB>
-    <mergeFactor>10</mergeFactor>
-    <!-- Deprecated -->
-    <!--<maxBufferedDocs>1000</maxBufferedDocs>-->
-    <!--<maxMergeDocs>2147483647</maxMergeDocs>-->
-    <!-- inherit from indexDefaults <maxFieldLength>10000</maxFieldLength> -->
-    <!-- If true, unlock any held write or commit locks on startup. 
-         This defeats the locking mechanism that allows multiple
-         processes to safely access a lucene index, and should be
-         used with care.
-         This is not needed if lock type is 'none' or 'single'
-     -->
-    <unlockOnStartup>false</unlockOnStartup>
-    <!-- If true, IndexReaders will be reopened (often more efficient) instead
-         of closed and then opened.  -->
-    <reopenReaders>true</reopenReaders>
-    <!--
-     Expert:
-    Controls how often Lucene loads terms into memory.  Default is 128 and is likely good for most everyone. -->
-    <!--<termIndexInterval>256</termIndexInterval>-->
-    <!--
-        Custom deletion policies can specified here. The class must
-        implement org.apache.lucene.index.IndexDeletionPolicy.
-
-        http://lucene.apache.org/java/2_3_2/api/org/apache/lucene/index/IndexDeletionPolicy.html
-
-        The standard Solr IndexDeletionPolicy implementation supports deleting
-        index commit points on number of commits, age of commit point and
-        optimized status.
-
-        The latest commit point should always be preserved regardless
-        of the criteria.
-    -->
-    <deletionPolicy class="solr.SolrDeletionPolicy">
-      <!-- The number of commit points to be kept -->
-      <str name="maxCommitsToKeep">1</str>
-      <!-- The number of optimized commit points to be kept -->
-      <str name="maxOptimizedCommitsToKeep">0</str>
-      <!--
-          Delete all commit points once they have reached the given age.
-          Supports DateMathParser syntax e.g.
-          
-          <str name="maxCommitAge">30MINUTES</str>
-          <str name="maxCommitAge">1DAY</str>
-      -->
-    </deletionPolicy>
-    <!--  To aid in advanced debugging, you may turn on IndexWriter debug logging.
-      Setting to true will set the file that the underlying Lucene IndexWriter
-      will write its debug infostream to.  -->
-    <infoStream file="INFOSTREAM.txt">false</infoStream>
-  </mainIndex>
-  <!--	Enables JMX if and only if an existing MBeanServer is found, use this
-    if you want to configure JMX through JVM parameters. Remove this to disable
-    exposing Solr configuration and statistics to JMX.
-
-		If you want to connect to a particular server, specify the agentId
-		e.g. <jmx agentId="myAgent" />
-
-		If you want to start a new MBeanServer, specify the serviceUrl
-		e.g <jmx serviceUrl="service:jmx:rmi:///jndi/rmi://localhost:9999/solr"/>
-
-		For more details see http://wiki.apache.org/solr/SolrJmx
-  -->
-  <jmx/>
-  <!-- the default high-performance update handler -->
-  <updateHandler class="solr.DirectUpdateHandler2">
-    <!-- A prefix of "solr." for class names is an alias that
-         causes solr to search appropriate packages, including
-         org.apache.solr.(search|update|request|core|analysis)
-     -->
-    <!-- Perform a <commit/> automatically under certain conditions:
-         maxDocs - number of updates since last commit is greater than this
-         maxTime - oldest uncommited update (in ms) is this long ago
-         Instead of enabling autoCommit, consider using "commitWithin"
-         when adding documents. http://wiki.apache.org/solr/UpdateXmlMessages
-    <autoCommit> 
-      <maxDocs>10000</maxDocs>
-      <maxTime>1000</maxTime> 
-    </autoCommit>
-    -->
-    <!-- The RunExecutableListener executes an external command from a
-      hook such as postCommit or postOptimize.
-         exe - the name of the executable to run
-         dir - dir to use as the current working directory. default="."
-         wait - the calling thread waits until the executable returns. default="true"
-         args - the arguments to pass to the program.  default=nothing
-         env - environment variables to set.  default=nothing
-      -->
-    <!-- A postCommit event is fired after every commit or optimize command
-    <listener event="postCommit" class="solr.RunExecutableListener">
-      <str name="exe">solr/bin/snapshooter</str>
-      <str name="dir">.</str>
-      <bool name="wait">true</bool>
-      <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
-      <arr name="env"> <str>MYVAR=val1</str> </arr>
-    </listener>
-    -->
-    <!-- A postOptimize event is fired only after every optimize command
-    <listener event="postOptimize" class="solr.RunExecutableListener">
-      <str name="exe">snapshooter</str>
-      <str name="dir">solr/bin</str>
-      <bool name="wait">true</bool>
-    </listener>
-    -->
-  </updateHandler>
-  <!-- Use the following format to specify a custom IndexReaderFactory - allows for alternate
-       IndexReader implementations.
-
-       ** Experimental Feature **
-       Please note - Using a custom IndexReaderFactory may prevent certain other features
-       from working. The API to IndexReaderFactory may change without warning or may even
-       be removed from future releases if the problems cannot be resolved.
-
-       ** Features that may not work with custom IndexReaderFactory **
-       The ReplicationHandler assumes a disk-resident index. Using a custom
-       IndexReader implementation may cause incompatibility with ReplicationHandler and
-       may cause replication to not work correctly. See SOLR-1366 for details.
-
-  <indexReaderFactory name="IndexReaderFactory" class="package.class">
-    Parameters as required by the implementation
-  </indexReaderFactory >
-  -->
-  <!-- To set the termInfosIndexDivisor, do this: -->
-  <!--<indexReaderFactory name="IndexReaderFactory" class="org.apache.solr.core.StandardIndexReaderFactory">
-    <int name="termInfosIndexDivisor">12</int>
-  </indexReaderFactory >-->
-  <query>
-    <!-- Maximum number of clauses in a boolean query... in the past, this affected
-        range or prefix queries that expanded to big boolean queries - built in Solr 
-        query parsers no longer create queries with this limitation. 
-        An exception is thrown if exceeded.  -->
-    <maxBooleanClauses>1024</maxBooleanClauses>
-    <!-- There are two implementations of cache available for Solr,
-         LRUCache, based on a synchronized LinkedHashMap, and
-         FastLRUCache, based on a ConcurrentHashMap.  FastLRUCache has faster gets
-         and slower puts in single threaded operation and thus is generally faster
-         than LRUCache when the hit ratio of the cache is high (> 75%), and may be
-         faster under other scenarios on multi-cpu systems. -->
-    <!-- Cache used by SolrIndexSearcher for filters (DocSets),
-         unordered sets of *all* documents that match a query.
-         When a new searcher is opened, its caches may be prepopulated
-         or "autowarmed" using data from caches in the old searcher.
-         autowarmCount is the number of items to prepopulate.  For LRUCache,
-         the autowarmed items will be the most recently accessed items.
-       Parameters:
-         class - the SolrCache implementation LRUCache or FastLRUCache
-         size - the maximum number of entries in the cache
-         initialSize - the initial capacity (number of entries) of
-           the cache.  (seel java.util.HashMap)
-         autowarmCount - the number of entries to prepopulate from
-           and old cache.
-         -->
-    <filterCache class="solr.FastLRUCache" size="512" initialSize="512" autowarmCount="0"/>
-    <!-- Cache used to hold field values that are quickly accessible
-         by document id.  The fieldValueCache is created by default
-         even if not configured here.
-      <fieldValueCache
-        class="solr.FastLRUCache"
-        size="512"
-        autowarmCount="128"
-        showItems="32"
-      />
-    -->
-    <!-- queryResultCache caches results of searches - ordered lists of
-         document ids (DocList) based on a query, a sort, and the range
-         of documents requested.  -->
-    <queryResultCache class="solr.LRUCache" size="512" initialSize="512" autowarmCount="0"/>
-    <!-- documentCache caches Lucene Document objects (the stored fields for each document).
-       Since Lucene internal document ids are transient, this cache will not be autowarmed.  -->
-    <documentCache class="solr.LRUCache" size="512" initialSize="512" autowarmCount="0"/>
-    <!-- If true, stored fields that are not requested will be loaded lazily.
-      This can result in a significant speed improvement if the usual case is to
-      not load all stored fields, especially if the skipped fields are large
-      compressed text fields.
-    -->
-    <enableLazyFieldLoading>true</enableLazyFieldLoading>
-    <!-- Example of a generic cache.  These caches may be accessed by name
-         through SolrIndexSearcher.getCache(),cacheLookup(), and cacheInsert().
-         The purpose is to enable easy caching of user/application level data.
-         The regenerator argument should be specified as an implementation
-         of solr.search.CacheRegenerator if autowarming is desired.  -->
-    <!--
-    <cache name="myUserCache"
-      class="solr.LRUCache"
-      size="4096"
-      initialSize="1024"
-      autowarmCount="1024"
-      regenerator="org.mycompany.mypackage.MyRegenerator"
-      />
-    -->
-    <!-- An optimization that attempts to use a filter to satisfy a search.
-         If the requested sort does not include score, then the filterCache
-         will be checked for a filter matching the query. If found, the filter
-         will be used as the source of document ids, and then the sort will be
-         applied to that.
-    <useFilterForSortedQuery>true</useFilterForSortedQuery>
-   -->
-    <!-- An optimization for use with the queryResultCache.  When a search
-         is requested, a superset of the requested number of document ids
-         are collected.  For example, if a search for a particular query
-         requests matching documents 10 through 19, and queryWindowSize is 50,
-         then documents 0 through 49 will be collected and cached.  Any further
-         requests in that range can be satisfied via the cache.  -->
-    <queryResultWindowSize>20</queryResultWindowSize>
-    <!-- Maximum number of documents to cache for any entry in the
-         queryResultCache. -->
-    <queryResultMaxDocsCached>200</queryResultMaxDocsCached>
-    <!-- a newSearcher event is fired whenever a new searcher is being prepared
-      and there is a current searcher handling requests (aka registered).
-      It can be used to prime certain caches to prevent long request times for
-      certain requests.
-    -->
-    <!-- QuerySenderListener takes an array of NamedList and executes a
-         local query request for each NamedList in sequence. -->
-    <listener event="newSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <!--
-        <lst> <str name="q">solr</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-        <lst> <str name="q">rocks</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-        <lst><str name="q">static newSearcher warming query from solrconfig.xml</str></lst>
-        -->
-      </arr>
-    </listener>
-    <!-- a firstSearcher event is fired whenever a new searcher is being
-         prepared but there is no current registered searcher to handle
-         requests or to gain autowarming data from. -->
-    <listener event="firstSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <lst>
-          <str name="q">solr rocks</str>
-          <str name="start">0</str>
-          <str name="rows">10</str>
-        </lst>
-        <lst>
-          <str name="q">static firstSearcher warming query from solrconfig.xml</str>
-        </lst>
-      </arr>
-    </listener>
-    <!-- If a search request comes in and there is no current registered searcher,
-         then immediately register the still warming searcher and use it.  If
-         "false" then all requests will block until the first searcher is done
-         warming. -->
-    <useColdSearcher>false</useColdSearcher>
-    <!-- Maximum number of searchers that may be warming in the background
-      concurrently.  An error is returned if this limit is exceeded. Recommend
-      1-2 for read-only slaves, higher for masters w/o cache warming. -->
-    <maxWarmingSearchers>2</maxWarmingSearchers>
-  </query>
-  <!-- 
-    Let the dispatch filter handler /select?qt=XXX
-    handleSelect=true will use consistent error handling for /select and /update
-    handleSelect=false will use solr1.1 style error formatting
-    -->
-  <requestDispatcher handleSelect="true">
-    <!--Make sure your system has some authentication before enabling remote streaming!  -->
-    <requestParsers enableRemoteStreaming="true" multipartUploadLimitInKB="2048000"/>
-    <!-- Set HTTP caching related parameters (for proxy caches and clients).
-          
-         To get the behaviour of Solr 1.2 (ie: no caching related headers)
-         use the never304="true" option and do not specify a value for
-         <cacheControl>
-    -->
-    <!-- <httpCaching never304="true"> -->
-    <httpCaching lastModifiedFrom="openTime" etagSeed="Solr">
-      <!-- lastModFrom="openTime" is the default, the Last-Modified value
-            (and validation against If-Modified-Since requests) will all be
-            relative to when the current Searcher was opened.
-            You can change it to lastModFrom="dirLastMod" if you want the
-            value to exactly corrispond to when the physical index was last
-            modified.
-
-            etagSeed="..." is an option you can change to force the ETag
-            header (and validation against If-None-Match requests) to be
-            differnet even if the index has not changed (ie: when making
-            significant changes to your config file)
-
-            lastModifiedFrom and etagSeed are both ignored if you use the
-            never304="true" option.
-       -->
-      <!-- If you include a <cacheControl> directive, it will be used to
-            generate a Cache-Control header, as well as an Expires header
-            if the value contains "max-age="
-
-            By default, no Cache-Control header is generated.
-
-            You can use the <cacheControl> option even if you have set
-            never304="true"
-       -->
-      <!-- <cacheControl>max-age=30, public</cacheControl> -->
-    </httpCaching>
-  </requestDispatcher>
-  <!-- requestHandler plugins... incoming queries will be dispatched to the
-     correct handler based on the path or the qt (query type) param.
-     Names starting with a '/' are accessed with the a path equal to the 
-     registered name.  Names without a leading '/' are accessed with:
-      http://host/app/select?qt=name
-     If no qt is defined, the requestHandler that declares default="true"
-     will be used.
-  -->
-  <requestHandler name="standard" class="solr.SearchHandler" default="true">
-    <!-- default values for query parameters -->
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-      <!--
-       <int name="rows">10</int>
-       <str name="fl">*</str>
-       <str name="version">2.1</str>
-        -->
-    </lst>
-  </requestHandler>
-  <!-- Please refer to http://wiki.apache.org/solr/SolrReplication for details on configuring replication -->
-  <!-- remove the <lst name="master"> section if this is just a slave -->
-  <!-- remove  the <lst name="slave"> section if this is just a master -->
-  <!--
-<requestHandler name="/replication" class="solr.ReplicationHandler" >
-    <lst name="master">
-      <str name="replicateAfter">commit</str>
-      <str name="replicateAfter">startup</str>
-      <str name="confFiles">schema.xml,stopwords.txt</str>
-    </lst>
-    <lst name="slave">
-      <str name="masterUrl">http://localhost:8983/solr/replication</str>
-      <str name="pollInterval">00:00:60</str>
-    </lst>
-</requestHandler>-->
-  <!-- DisMaxRequestHandler allows easy searching across multiple fields
-       for simple user-entered phrases.  It's implementation is now
-       just the standard SearchHandler with a default query type
-       of "dismax". 
-       see http://wiki.apache.org/solr/DisMaxRequestHandler
-   -->
-  <requestHandler name="dismax" class="solr.SearchHandler">
-    <lst name="defaults">
-      <str name="defType">dismax</str>
-      <str name="echoParams">explicit</str>
-      <float name="tie">0.01</float>
-      <str name="qf">
-        text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-     </str>
-      <str name="pf">
-        text^0.2 features^1.1 name^1.5 manu^1.4 manu_exact^1.9
-     </str>
-      <str name="bf">
-        popularity^0.5 recip(price,1,1000,1000)^0.3
-     </str>
-      <str name="fl">
-        id,name,price,score
-     </str>
-      <str name="mm">
-        2&lt;-1 5&lt;-2 6&lt;90%
-     </str>
-      <int name="ps">100</int>
-      <str name="q.alt">*:*</str>
-      <!-- example highlighter config, enable per-query with hl=true -->
-      <str name="hl.fl">text features name</str>
-      <!-- for this field, we want no fragmenting, just highlighting -->
-      <str name="f.name.hl.fragsize">0</str>
-      <!-- instructs Solr to return the field itself if no query terms are
-          found -->
-      <str name="f.name.hl.alternateField">name</str>
-      <str name="f.text.hl.fragmenter">regex</str>
-      <!-- defined below -->
-    </lst>
-  </requestHandler>
-  <!-- Note how you can register the same handler multiple times with
-       different names (and different init parameters)
-    -->
-  <requestHandler name="partitioned" class="solr.SearchHandler">
-    <lst name="defaults">
-      <str name="defType">dismax</str>
-      <str name="echoParams">explicit</str>
-      <str name="qf">text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0</str>
-      <str name="mm">2&lt;-1 5&lt;-2 6&lt;90%</str>
-      <!-- This is an example of using Date Math to specify a constantly
-          moving date range in a config...
-       -->
-      <str name="bq">incubationdate_dt:[* TO NOW/DAY-1MONTH]^2.2</str>
-    </lst>
-    <!-- In addition to defaults, "appends" params can be specified
-         to identify values which should be appended to the list of
-         multi-val params from the query (or the existing "defaults").
-
-         In this example, the param "fq=instock:true" will be appended to
-         any query time fq params the user may specify, as a mechanism for
-         partitioning the index, independent of any user selected filtering
-         that may also be desired (perhaps as a result of faceted searching).
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "appends" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <lst name="appends">
-      <str name="fq">inStock:true</str>
-    </lst>
-    <!-- "invariants" are a way of letting the Solr maintainer lock down
-         the options available to Solr clients.  Any params values
-         specified here are used regardless of what values may be specified
-         in either the query, the "defaults", or the "appends" params.
-
-         In this example, the facet.field and facet.query params are fixed,
-         limiting the facets clients can use.  Faceting is not turned on by
-         default - but if the client does specify facet=true in the request,
-         these are the only facets they will be able to see counts for;
-         regardless of what other facet.field or facet.query params they
-         may specify.
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "invariants" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <lst name="invariants">
-      <str name="facet.field">cat</str>
-      <str name="facet.field">manu_exact</str>
-      <str name="facet.query">price:[* TO 500]</str>
-      <str name="facet.query">price:[500 TO *]</str>
-    </lst>
-  </requestHandler>
-  <!--
-   Search components are registered to SolrCore and used by Search Handlers
-   
-   By default, the following components are avaliable:
-    
-   <searchComponent name="query"     class="org.apache.solr.handler.component.QueryComponent" />
-   <searchComponent name="facet"     class="org.apache.solr.handler.component.FacetComponent" />
-   <searchComponent name="mlt"       class="org.apache.solr.handler.component.MoreLikeThisComponent" />
-   <searchComponent name="highlight" class="org.apache.solr.handler.component.HighlightComponent" />
-   <searchComponent name="stats"     class="org.apache.solr.handler.component.StatsComponent" />
-   <searchComponent name="debug"     class="org.apache.solr.handler.component.DebugComponent" />
-   
-   Default configuration in a requestHandler would look like:
-    <arr name="components">
-      <str>query</str>
-      <str>facet</str>
-      <str>mlt</str>
-      <str>highlight</str>
-      <str>stats</str>
-      <str>debug</str>
-    </arr>
-
-    If you register a searchComponent to one of the standard names, that will be used instead.
-    To insert components before or after the 'standard' components, use:
-    
-    <arr name="first-components">
-      <str>myFirstComponentName</str>
-    </arr>
-    
-    <arr name="last-components">
-      <str>myLastComponentName</str>
-    </arr>
-  -->
-  <!-- The spell check component can return a list of alternative spelling
-  suggestions.  -->
-  <searchComponent name="spellcheck" class="solr.SpellCheckComponent">
-    <str name="queryAnalyzerFieldType">textSpell</str>
-    <lst name="spellchecker">
-      <str name="name">default</str>
-      <str name="field">name</str>
-      <str name="spellcheckIndexDir">./spellchecker</str>
-    </lst>
-    <!-- a spellchecker that uses a different distance measure
-    <lst name="spellchecker">
-      <str name="name">jarowinkler</str>
-      <str name="field">spell</str>
-      <str name="distanceMeasure">org.apache.lucene.search.spell.JaroWinklerDistance</str>
-      <str name="spellcheckIndexDir">./spellchecker2</str>
-    </lst>
-     -->
-    <!-- a file based spell checker
-    <lst name="spellchecker">
-      <str name="classname">solr.FileBasedSpellChecker</str>
-      <str name="name">file</str>
-      <str name="sourceLocation">spellings.txt</str>
-      <str name="characterEncoding">UTF-8</str>
-      <str name="spellcheckIndexDir">./spellcheckerFile</str>
-    </lst>
-    -->
-  </searchComponent>
-  <!-- A request handler utilizing the spellcheck component.  
-  #############################################################################
-  NOTE: This is purely as an example.  The whole purpose of the
-  SpellCheckComponent is to hook it into the request handler that handles (i.e.
-  the standard or dismax SearchHandler) queries such that a separate request is
-  not needed to get suggestions.
-
-  IN OTHER WORDS, THERE IS REALLY GOOD CHANCE THE SETUP BELOW IS NOT WHAT YOU
-  WANT FOR YOUR PRODUCTION SYSTEM!
-  #############################################################################
-  -->
-  <requestHandler name="/spell" class="solr.SearchHandler" lazy="true">
-    <lst name="defaults">
-      <!-- omp = Only More Popular -->
-      <str name="spellcheck.onlyMorePopular">false</str>
-      <!-- exr = Extended Results -->
-      <str name="spellcheck.extendedResults">false</str>
-      <!--  The number of suggestions to return -->
-      <str name="spellcheck.count">1</str>
-    </lst>
-    <arr name="last-components">
-      <str>spellcheck</str>
-    </arr>
-  </requestHandler>
-  <searchComponent name="tvComponent" class="org.apache.solr.handler.component.TermVectorComponent"/>
-  <!-- A Req Handler for working with the tvComponent.  This is purely as an example.
-  You will likely want to add the component to your already specified request handlers. -->
-  <requestHandler name="tvrh" class="org.apache.solr.handler.component.SearchHandler">
-    <lst name="defaults">
-      <bool name="tv">true</bool>
-    </lst>
-    <arr name="last-components">
-      <str>tvComponent</str>
-    </arr>
-  </requestHandler>
-  <!-- Clustering Component
-       http://wiki.apache.org/solr/ClusteringComponent
-       This relies on third party jars which are not included in the release.
-       To use this component (and the "/clustering" handler)
-       Those jars will need to be downloaded, and you'll need to set the
-       solr.cluster.enabled system property when running solr...
-          java -Dsolr.clustering.enabled=true -jar start.jar
-    -->
-  <searchComponent name="clusteringComponent" enable="${solr.clustering.enabled:false}" class="org.apache.solr.handler.clustering.ClusteringComponent">
-    <!-- Declare an engine -->
-    <lst name="engine">
-      <!-- The name, only one can be named "default" -->
-      <str name="name">default</str>
-      <!-- 
-           Class name of Carrot2 clustering algorithm. Currently available algorithms are:
-           
-           * org.carrot2.clustering.lingo.LingoClusteringAlgorithm
-           * org.carrot2.clustering.stc.STCClusteringAlgorithm
-           
-           See http://project.carrot2.org/algorithms.html for the algorithm's characteristics.
-        -->
-      <str name="carrot.algorithm">org.carrot2.clustering.lingo.LingoClusteringAlgorithm</str>
-      <!-- 
-           Overriding values for Carrot2 default algorithm attributes. For a description
-           of all available attributes, see: http://download.carrot2.org/stable/manual/#chapter.components.
-           Use attribute key as name attribute of str elements below. These can be further
-           overridden for individual requests by specifying attribute key as request
-           parameter name and attribute value as parameter value.
-        -->
-      <str name="LingoClusteringAlgorithm.desiredClusterCountBase">20</str>
-    </lst>
-    <lst name="engine">
-      <str name="name">stc</str>
-      <str name="carrot.algorithm">org.carrot2.clustering.stc.STCClusteringAlgorithm</str>
-    </lst>
-  </searchComponent>
-  <requestHandler name="/clustering" enable="${solr.clustering.enabled:false}" class="solr.SearchHandler">
-    <lst name="defaults">
-      <bool name="clustering">true</bool>
-      <str name="clustering.engine">default</str>
-      <bool name="clustering.results">true</bool>
-      <!-- The title field -->
-      <str name="carrot.title">name</str>
-      <str name="carrot.url">id</str>
-      <!-- The field to cluster on -->
-      <str name="carrot.snippet">features</str>
-      <!-- produce summaries -->
-      <bool name="carrot.produceSummary">true</bool>
-      <!-- the maximum number of labels per cluster -->
-      <!--<int name="carrot.numDescriptions">5</int>-->
-      <!-- produce sub clusters -->
-      <bool name="carrot.outputSubClusters">false</bool>
-    </lst>
-    <arr name="last-components">
-      <str>clusteringComponent</str>
-    </arr>
-  </requestHandler>
-  <!-- Solr Cell: http://wiki.apache.org/solr/ExtractingRequestHandler -->
-  <requestHandler name="/update/extract" class="org.apache.solr.handler.extraction.ExtractingRequestHandler" startup="lazy">
-    <lst name="defaults">
-      <!-- All the main content goes into "text"... if you need to return
-           the extracted text or do highlighting, use a stored field. -->
-      <str name="fmap.content">text</str>
-      <str name="lowernames">true</str>
-      <str name="uprefix">ignored_</str>
-      <!-- capture link hrefs but ignore div attributes -->
-      <str name="captureAttr">true</str>
-      <str name="fmap.a">links</str>
-      <str name="fmap.div">ignored_</str>
-    </lst>
-  </requestHandler>
-  <!-- A component to return terms and document frequency of those terms.
-       This component does not yet support distributed search. -->
-  <searchComponent name="termsComponent" class="org.apache.solr.handler.component.TermsComponent"/>
-  <requestHandler name="/terms" class="org.apache.solr.handler.component.SearchHandler">
-    <lst name="defaults">
-      <bool name="terms">true</bool>
-    </lst>
-    <arr name="components">
-      <str>termsComponent</str>
-    </arr>
-  </requestHandler>
-  <!-- a search component that enables you to configure the top results for
-       a given query regardless of the normal lucene scoring.-->
-  <searchComponent name="elevator" class="solr.QueryElevationComponent">
-    <!-- pick a fieldType to analyze queries -->
-    <str name="queryFieldType">string</str>
-    <str name="config-file">elevate.xml</str>
-  </searchComponent>
-  <!-- a request handler utilizing the elevator component -->
-  <requestHandler name="/elevate" class="solr.SearchHandler" startup="lazy">
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-    </lst>
-    <arr name="last-components">
-      <str>elevator</str>
-    </arr>
-  </requestHandler>
-  <!-- Update request handler.  
-
-       Note: Since solr1.1 requestHandlers requires a valid content type header if posted in
-       the body. For example, curl now requires: -H 'Content-type:text/xml; charset=utf-8'
-       The response format differs from solr1.1 formatting and returns a standard error code.
-       To enable solr1.1 behavior, remove the /update handler or change its path
-    -->
-  <requestHandler name="/update" class="solr.XmlUpdateRequestHandler"/>
-  <requestHandler name="/update/javabin" class="solr.BinaryUpdateRequestHandler"/>
-  <!--
-   Analysis request handler.  Since Solr 1.3.  Use to return how a document is analyzed.  Useful
-   for debugging and as a token server for other types of applications.
-
-   This is deprecated in favor of the improved DocumentAnalysisRequestHandler and FieldAnalysisRequestHandler
-
-   <requestHandler name="/analysis" class="solr.AnalysisRequestHandler" />
-   -->
-  <!--
-    An analysis handler that provides a breakdown of the analysis process of provided docuemnts. This handler expects a
-    (single) content stream with the following format:
-
-    <docs>
-      <doc>
-        <field name="id">1</field>
-        <field name="name">The Name</field>
-        <field name="text">The Text Value</field>
-      <doc>
-      <doc>...</doc>
-      <doc>...</doc>
-      ...
-    </docs>
-
-    Note: Each document must contain a field which serves as the unique key. This key is used in the returned
-    response to assoicate an analysis breakdown to the analyzed document.
-
-    Like the FieldAnalysisRequestHandler, this handler also supports query analysis by
-    sending either an "analysis.query" or "q" request paraemter that holds the query text to be analyized. It also
-    supports the "analysis.showmatch" parameter which when set to true, all field tokens that match the query
-    tokens will be marked as a "match".
-  -->
-  <requestHandler name="/analysis/document" class="solr.DocumentAnalysisRequestHandler"/>
-  <!--
-    RequestHandler that provides much the same functionality as analysis.jsp. Provides the ability
-    to specify multiple field types and field names in the same request and outputs index-time and
-    query-time analysis for each of them.
-
-    Request parameters are:
-    analysis.fieldname - The field name whose analyzers are to be used
-    analysis.fieldtype - The field type whose analyzers are to be used
-    analysis.fieldvalue - The text for index-time analysis
-    q (or analysis.q) - The text for query time analysis
-    analysis.showmatch (true|false) - When set to true and when query analysis is performed, the produced
-                                      tokens of the field value analysis will be marked as "matched" for every
-                                      token that is produces by the query analysis
-   -->
-  <requestHandler name="/analysis/field" class="solr.FieldAnalysisRequestHandler"/>
-  <!-- CSV update handler, loaded on demand -->
-  <requestHandler name="/update/csv" class="solr.CSVRequestHandler" startup="lazy"/>
-  <!-- 
-   Admin Handlers - This will register all the standard admin RequestHandlers.  Adding 
-   this single handler is equivalent to registering:
-   
-  <requestHandler name="/admin/luke"       class="org.apache.solr.handler.admin.LukeRequestHandler" />
-  <requestHandler name="/admin/system"     class="org.apache.solr.handler.admin.SystemInfoHandler" />
-  <requestHandler name="/admin/plugins"    class="org.apache.solr.handler.admin.PluginInfoHandler" />
-  <requestHandler name="/admin/threads"    class="org.apache.solr.handler.admin.ThreadDumpHandler" />
-  <requestHandler name="/admin/properties" class="org.apache.solr.handler.admin.PropertiesRequestHandler" />
-  <requestHandler name="/admin/file"       class="org.apache.solr.handler.admin.ShowFileRequestHandler" >
-  
-  If you wish to hide files under ${solr.home}/conf, explicitly register the ShowFileRequestHandler using:
-  <requestHandler name="/admin/file" class="org.apache.solr.handler.admin.ShowFileRequestHandler" >
-    <lst name="invariants">
-     <str name="hidden">synonyms.txt</str> 
-     <str name="hidden">anotherfile.txt</str> 
-    </lst>
-  </requestHandler>
-  -->
-  <requestHandler name="/admin/" class="org.apache.solr.handler.admin.AdminHandlers"/>
-  <!-- ping/healthcheck -->
-  <requestHandler name="/admin/ping" class="PingRequestHandler">
-    <lst name="defaults">
-      <str name="qt">standard</str>
-      <str name="q">solrpingquery</str>
-      <str name="echoParams">all</str>
-    </lst>
-  </requestHandler>
-  <!-- Echo the request contents back to the client -->
-  <requestHandler name="/debug/dump" class="solr.DumpRequestHandler">
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-      <!-- for all params (including the default etc) use: 'all' -->
-      <str name="echoHandler">true</str>
-    </lst>
-  </requestHandler>
-  <highlighting>
-    <!-- Configure the standard fragmenter -->
-    <!-- This could most likely be commented out in the "default" case -->
-    <fragmenter name="gap" class="org.apache.solr.highlight.GapFragmenter" default="true">
-      <lst name="defaults">
-        <int name="hl.fragsize">100</int>
-      </lst>
-    </fragmenter>
-    <!-- A regular-expression-based fragmenter (f.i., for sentence extraction) -->
-    <fragmenter name="regex" class="org.apache.solr.highlight.RegexFragmenter">
-      <lst name="defaults">
-        <!-- slightly smaller fragsizes work better because of slop -->
-        <int name="hl.fragsize">70</int>
-        <!-- allow 50% slop on fragment sizes -->
-        <float name="hl.regex.slop">0.5</float>
-        <!-- a basic sentence pattern -->
-        <str name="hl.regex.pattern">[-\w ,/\n\"']{20,200}</str>
-      </lst>
-    </fragmenter>
-    <!-- Configure the standard formatter -->
-    <formatter name="html" class="org.apache.solr.highlight.HtmlFormatter" default="true">
-      <lst name="defaults">
-        <str name="hl.simple.pre"><![CDATA[<em>]]></str>
-        <str name="hl.simple.post"><![CDATA[</em>]]></str>
-      </lst>
-    </formatter>
-  </highlighting>
-  <!-- An example dedup update processor that creates the "id" field on the fly
-       based on the hash code of some other fields.  This example has overwriteDupes
-       set to false since we are using the id field as the signatureField and Solr
-       will maintain uniqueness based on that anyway. 
-       
-       You have to link the chain to an update handler above to use it ie:
-         <requestHandler name="/update "class="solr.XmlUpdateRequestHandler">
-           <lst name="defaults">
-             <str name="update.processor">dedupe</str>
-           </lst>
-         </requestHandler>  
-  -->
-  <!--
-  <updateRequestProcessorChain name="dedupe">
-    <processor class="org.apache.solr.update.processor.SignatureUpdateProcessorFactory">
-      <bool name="enabled">true</bool>
-      <str name="signatureField">id</str>
-      <bool name="overwriteDupes">false</bool>
-      <str name="fields">name,features,cat</str>
-      <str name="signatureClass">org.apache.solr.update.processor.Lookup3Signature</str>
-    </processor>
-    <processor class="solr.LogUpdateProcessorFactory" />
-    <processor class="solr.RunUpdateProcessorFactory" />
-  </updateRequestProcessorChain>
-  -->
-  <!-- queryResponseWriter plugins... query responses will be written using the
-    writer specified by the 'wt' request parameter matching the name of a registered
-    writer.
-    The "default" writer is the default and will be used if 'wt' is not specified 
-    in the request. XMLResponseWriter will be used if nothing is specified here.
-    The json, python, and ruby writers are also available by default.
-
-    <queryResponseWriter name="xml" class="org.apache.solr.request.XMLResponseWriter" default="true"/>
-    <queryResponseWriter name="json" class="org.apache.solr.request.JSONResponseWriter"/>
-    <queryResponseWriter name="python" class="org.apache.solr.request.PythonResponseWriter"/>
-    <queryResponseWriter name="ruby" class="org.apache.solr.request.RubyResponseWriter"/>
-    <queryResponseWriter name="php" class="org.apache.solr.request.PHPResponseWriter"/>
-    <queryResponseWriter name="phps" class="org.apache.solr.request.PHPSerializedResponseWriter"/>
-
-    <queryResponseWriter name="custom" class="com.example.MyResponseWriter"/>
-  -->
-  <!-- XSLT response writer transforms the XML output by any xslt file found
-       in Solr's conf/xslt directory.  Changes to xslt files are checked for
-       every xsltCacheLifetimeSeconds.  
-   -->
-  <queryResponseWriter name="xslt" class="org.apache.solr.request.XSLTResponseWriter">
-    <int name="xsltCacheLifetimeSeconds">5</int>
-  </queryResponseWriter>
-  <!-- example of registering a query parser
-  <queryParser name="lucene" class="org.apache.solr.search.LuceneQParserPlugin"/>
-  -->
-  <!-- example of registering a custom function parser 
-  <valueSourceParser name="myfunc" class="com.mycompany.MyValueSourceParser" />
-  -->
-  <!-- config for the admin interface -->
-  <admin>
-    <defaultQuery>solr</defaultQuery>
-    <!-- configure a healthcheck file for servers behind a loadbalancer
-    <healthcheck type="file">server-enabled</healthcheck>
-    -->
-  </admin>
-  <requestHandler class="solr.MoreLikeThisHandler" name="/mlt">
-    <lst name="defaults">
-      <str name="mlt.mintf">1</str>
-      <str name="mlt.mindf">2</str>
-    </lst>
-  </requestHandler>
-</config>