dolly 1.1.7 → 3.0.0

data/lib/exceptions/dolly.rb

@@ -1,47 +0,0 @@
-module Dolly
-  class ResourceNotFound < RuntimeError
-    def to_s
-      'The document was not found.'
-    end
-  end
-  class ServerError < RuntimeError
-    def initialize msg
-      @msg = msg
-    end
-
-    def to_s
-      "There has been an error on the couchdb server: #{@msg.inspect}"
-    end
-  end
-  class MissingDesignError < RuntimeError
-    def to_s
-      'Design document is missing. Add it into couchdb.yml as design:name.'
-    end
-  end
-  class InvalidConfigFileError < RuntimeError
-
-    def initialize filename
-      @filename = filename
-    end
-
-    def to_s
-      "Invalid config file at #{filename}"
-    end
-  end
-  class InvalidProperty < RuntimeError
-    def to_s
-      "Trying to set an undefined property."
-    end
-  end
-  class DocumentInvalidError < RuntimeError; end
-  class MissingPropertyError < RuntimeError; end
-  class MissingRequestConfigSettings < RuntimeError
-    def initialize key
-      @key = key
-    end
-
-    def to_s
-      "Missing required #{@key} setting for Dolly::Request"
-    end
-  end
-end

data/test/collection_test.rb

@@ -1,59 +0,0 @@
-require 'test_helper'
-
-class BaseDolly < Dolly::Document; end
-
-class FooBar < BaseDolly
-  property :foo, :bar
-end
-
-class CollectionTest < ActiveSupport::TestCase
-
-  def setup
-    @json = '{"total_rows":2,"offset":0,"rows":[{"id":"foo_bar/0","key":"foo_bar","value":1,"doc":{"_id":"foo_bar/0","_rev":"7f66379ac92eb6dfafa50c94bd795122","foo":"Foo B","bar":"Bar B","type":"foo_bar"}},{"id":"foo_bar/1","key":"foo_bar","value":1,"doc":{"_id":"foo_bar/1","_rev":"4d33cea0e55142c9ecc6a81600095469","foo":"Foo A","bar":"Bar A","type":"foo_bar"}}]}'
-    @collection = Dolly::Collection.new @json, FooBar
-  end
-
-  test 'each returns nil' do
-    assert_equal @collection.each { |foo| foo }, nil
-  end
-
-  test 'to_a returns an array' do
-    assert_equal true, @collection.to_a.is_a?(Array)
-  end
-
-  test 'count returns the number of objects in collection' do
-    assert_equal 2, @collection.count
-  end
-
-  test 'to_json returns a string of json' do
-    assert_equal true, @collection.to_json.is_a?(String)
-  end
-
-  test 'map returns an enumerator' do
-    assert_equal true, @collection.map.is_a?(Enumerator)
-  end
-
-  test 'map accepts a block and returns the correct values' do
-    assert_equal ["Foo B", "Foo A"], @collection.map(&:foo)
-  end
-
-  test 'update attributes will change expected attributes' do
-    @collection.update_properties! foo: 'Foo 4 All'
-    assert_equal ['Foo 4 All', 'Foo 4 All'], @collection.map(&:foo)
-  end
-
-  test 'update empty attributes' do
-    json = '{"total_rows":2,"offset":0,"rows":[{"id":"foo_bar/0","key":"foo_bar","value":1,"doc":{"_id":"foo_bar/0","_rev":"7f66379ac92eb6dfafa50c94bd795122","foo":null,"bar":"","type":"foo_bar"}},{"id":"foo_bar/1","key":"foo_bar","value":1,"doc":{"_id":"foo_bar/1","_rev":"4d33cea0e55142c9ecc6a81600095469","foo":"Foo A","bar":"Bar A","type":"foo_bar"}}]}'
-    collection = Dolly::Collection.new json, FooBar
-
-    collection.update_properties! foo: 'Foo 4 All', bar: 'stuff'
-    assert_equal ['Foo 4 All', 'Foo 4 All'], collection.map(&:foo)
-    assert_equal ['stuff', 'stuff'], collection.map(&:bar)
-  end
-
-  test 'update attributes will raise exception if property is missing' do
-    assert_raise Dolly::MissingPropertyError do
-      @collection.update_properties! missing: 'Ha! Ha!'
-    end
-  end
-end

data/test/configuration_test.rb

@@ -1,9 +0,0 @@
-require 'test_helper'
-
-class ConfigurationTest < ActiveSupport::TestCase
-  test 'configure allows for changes to configuration' do
-    assert Dolly.configure { |dolly| dolly.log_requests = true }
-    assert_equal true, Dolly.log_requests?
-    assert Dolly.reset!
-  end
-end

data/test/dummy/README.rdoc

@@ -1,28 +0,0 @@
-== README
-
-This README would normally document whatever steps are necessary to get the
-application up and running.
-
-Things you may want to cover:
-
-* Ruby version
-
-* System dependencies
-
-* Configuration
-
-* Database creation
-
-* Database initialization
-
-* How to run the test suite
-
-* Services (job queues, cache servers, search engines, etc.)
-
-* Deployment instructions
-
-* ...
-
-
-Please feel free to use a different markup language if you do not plan to run
-<tt>rake doc:app</tt>.

data/test/dummy/Rakefile

@@ -1,6 +0,0 @@
-# Add your own tasks in files placed in lib/tasks ending in .rake,
-# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
-
-require File.expand_path('../config/application', __FILE__)
-
-Dummy::Application.load_tasks

data/test/dummy/app/assets/javascripts/application.js

@@ -1,13 +0,0 @@
-// This is a manifest file that'll be compiled into application.js, which will include all the files
-// listed below.
-//
-// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts,
-// or vendor/assets/javascripts of plugins, if any, can be referenced here using a relative path.
-//
-// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
-// compiled file.
-//
-// Read Sprockets README (https://github.com/sstephenson/sprockets#sprockets-directives) for details
-// about supported directives.
-//
-//= require_tree .

data/test/dummy/app/assets/stylesheets/application.css

@@ -1,13 +0,0 @@
-/*
- * This is a manifest file that'll be compiled into application.css, which will include all the files
- * listed below.
- *
- * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets,
- * or vendor/assets/stylesheets of plugins, if any, can be referenced here using a relative path.
- *
- * You're free to add application-wide styles to this file and they'll appear at the top of the
- * compiled file, but it's generally better to create a new file per style scope.
- *
- *= require_self
- *= require_tree .
- */

data/test/dummy/app/controllers/application_controller.rb

@@ -1,5 +0,0 @@
-class ApplicationController < ActionController::Base
-  # Prevent CSRF attacks by raising an exception.
-  # For APIs, you may want to use :null_session instead.
-  protect_from_forgery with: :exception
-end

data/test/dummy/app/helpers/application_helper.rb

@@ -1,2 +0,0 @@
-module ApplicationHelper
-end

data/test/dummy/app/views/layouts/application.html.erb

@@ -1,14 +0,0 @@
-<!DOCTYPE html>
-<html>
-<head>
-  <title>Dummy</title>
-  <%= stylesheet_link_tag    "application", media: "all", "data-turbolinks-track" => true %>
-  <%= javascript_include_tag "application", "data-turbolinks-track" => true %>
-  <%= csrf_meta_tags %>
-</head>
-<body>
-
-<%= yield %>
-
-</body>
-</html>

data/test/dummy/bin/bundle

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
-load Gem.bin_path('bundler', 'bundle')

data/test/dummy/bin/rails

@@ -1,4 +0,0 @@
-#!/usr/bin/env ruby
-APP_PATH = File.expand_path('../../config/application',  __FILE__)
-require_relative '../config/boot'
-require 'rails/commands'

data/test/dummy/bin/rake

@@ -1,4 +0,0 @@
-#!/usr/bin/env ruby
-require_relative '../config/boot'
-require 'rake'
-Rake.application.run

data/test/dummy/config.ru

@@ -1,4 +0,0 @@
-# This file is used by Rack-based servers to start the application.
-
-require ::File.expand_path('../config/environment',  __FILE__)
-run Rails.application

data/test/dummy/config/application.rb

@@ -1,27 +0,0 @@
-require File.expand_path('../boot', __FILE__)
-
-require "action_controller/railtie"
-require "action_mailer/railtie"
-require "sprockets/railtie"
-require "rails/test_unit/railtie"
-
-Bundler.require(*Rails.groups)
-require "dolly"
-
-module Dummy
-  class Application < Rails::Application
-    # Settings in config/environments/* take precedence over those specified here.
-    # Application configuration should go into files in config/initializers
-    # -- all .rb files in that directory are automatically loaded.
-    config.autoload_paths += %W(#{config.root}/lib/dolly)
-
-    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
-    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
-    # config.time_zone = 'Central Time (US & Canada)'
-
-    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
-    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
-    # config.i18n.default_locale = :de
-  end
-end
-

data/test/dummy/config/boot.rb

@@ -1,5 +0,0 @@
-# Set up gems listed in the Gemfile.
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
-
-require 'bundler/setup' if File.exists?(ENV['BUNDLE_GEMFILE'])
-$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)

data/test/dummy/config/couchdb.yml

@@ -1,13 +0,0 @@
-defaults: &defaults
-  host: localhost
-  port: 5984
-  protocol: http
-  design: 'test'
-
-development:
-  <<: *defaults
-  name: test
-
-test:
-  <<: *defaults
-  name: test

data/test/dummy/config/environment.rb

@@ -1,5 +0,0 @@
-# Load the Rails application.
-require File.expand_path('../application', __FILE__)
-
-# Initialize the Rails application.
-Dummy::Application.initialize!

data/test/dummy/config/environments/development.rb

@@ -1,29 +0,0 @@
-Dummy::Application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations
-  config.active_record.migration_error = :page_load
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-end

data/test/dummy/config/environments/production.rb

@@ -1,80 +0,0 @@
-Dummy::Application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both thread web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable Rails's static asset server (Apache or nginx will already do this).
-  config.serve_static_assets = false
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # Generate digests for assets URLs.
-  config.assets.digest = true
-
-  # Version of your assets, change this if you want to expire all your assets.
-  config.assets.version = '1.0'
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Set to :debug to see everything in the log.
-  config.log_level = :info
-
-  # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = "http://assets.example.com"
-
-  # Precompile additional assets.
-  # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-  # config.assets.precompile += %w( search.js )
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation can not be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Disable automatic flushing of the log to improve performance.
-  # config.autoflush_log = false
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-end

data/test/dummy/config/environments/test.rb

@@ -1,36 +0,0 @@
-Dummy::Application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure static asset server for tests with Cache-Control for performance.
-  config.serve_static_assets  = true
-  config.static_cache_control = "public, max-age=3600"
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-end

data/test/dummy/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!