doing 1.0.90 → 2.0.2.pre

data/README.md

@@ -4,18 +4,11 @@
 
 _If you're one of the rare people like me who find this useful, feel free to [buy me some coffee](http://brettterpstra.com/donate/)._
 
-## Contents
+<!--README-->
 
-- [What and why](#what-and-why)
-- [Installation](#installation)
-- [The "doing" file](#the-doing-file)
-- [Configuration](#configuration)
-- [Usage](#usage)
-- [Extras](#extras)
-- [Troubleshooting](#troubleshooting)
-- [Changelog](#changelog)
+The current version of `doing` is <!--VER-->2.0.0<!--END VER-->.
 
-<!--README-->
+Find all of the documentation in the [doing wiki](https://github.com/ttscoff/doing/wiki).
 
 ## What and why
 
@@ -23,658 +16,13 @@ _If you're one of the rare people like me who find this useful, feel free to [bu
 
 While I'm working, I have hourly reminders to record what I'm working on, and I try to remember to punch in quick notes if I'm unexpectedly called away from a project. I can do this just by typing `doing now tracking down the CG bug`. 
 
-If there's something I want to look at later but doesn't need to be added to a task list or tracker, I can type `doing later check out the pinboard bookmarks from macdrifter`. When I get back to my computer --- or just need a refresher after a distraction --- I can type `doing last` to see what the last thing on my plate was. I can also type `doing recent` (or just `doing`) to get a list of the last few entries. `doing today` gives me everything since midnight for the current day, making it easy to see what I've accomplished over a sleepless night.
-
-## Installation
-
-The current version of `doing` is <!--VER-->1.0.89<!--END VER-->.
-
-    $ [sudo] gem install doing
-
-Only use `sudo` if your environment requires it. If you're using the system Ruby on a Mac, for example, it will likely be necessary. If `gem install doing` fails, then run `sudo gem install doing` and provide your administrator password.
-
-Run `doing config` to open your `~/.doingrc` file in the editor defined in the `$EDITOR` environment variable. Set up your `doing_file` right away (where you want entries to be stored), and cover the rest after you've read the docs.
-
-See the [support](#support) section below for troubleshooting details.
-
-## The "doing" file
-
-The file that stores all of your entries is generated the first time you add an entry (with `doing now` or `doing later`). By default, the file is created in `~/what_was_i_doing.md`, but you can modify this in the config file.
-
-The format of the "doing" file is TaskPaper-compatible. You can edit it by hand at any time (in TaskPaper or any text editor), but it uses a specific format for parsing, so be sure to maintain the dates and pipe characters. 
-
-Notes are anything in the list without a leading hyphen and date. They belong to the entry directly before them, and they should be indented one level beyond the parent item. 
-
-When using the `now` and `later` commands on the command line, you can start the entry with a quote and hit return, then type the note and close the quote. Anything after the first line will be turned into a TaskPaper-compatible note for the task and can be displayed in templates using `%note`.
-
-Notes can be prevented from ever appearing in output with the global option `--no-notes`: `doing --no-notes show all`.
-
-Auto tagging (adding tags listed in .doingrc under `autotag` and `default_tags`) can be skipped for an entry with the `-x` global option: `doing -x done skipping some automatic tagging`.
-
-## Configuration
-
-A basic configuration looks like this:
-
-    ---
-    doing_file: /Users/username/Dropbox/doing.taskpaper
-    current_section: Currently
-    default_template: '%date: %title%note'
-    default_date_format: '%Y-%m-%d %H:%M'
-    marker_tag: flagged
-    marker_color: yellow
-    tags_color: boldcyan
-    default_tags: []
-    editor_app: TaskPaper
-    config_editor_app: Sublime Text
-    :include_notes: true
-    views:
-      color:
-        date_format: '%F %_I:%M%P'
-        section: Currently
-        count: 10
-        wrap_width: 0
-        template: '%boldblack%date %boldgreen| %boldwhite%title%default%note'
-        order: desc
-    templates:
-      default:
-        date_format: '%Y-%m-%d %H:%M'
-        template: '%date | %title%note'
-        wrap_width: 0
-      today:
-        date_format: '%_I:%M%P'
-        template: '%date: %title%odnote'
-        wrap_width: 0
-      last:
-        date_format: '%_I:%M%P on %a'
-        template: '%title (at %date)%odnote'
-        wrap_width: 0
-      recent:
-        date_format: '%_I:%M%P'
-        template: '%date > %title%odnote'
-        wrap_width: 50
-        count: 10
-    autotag:
-      whitelist:
-      - coding
-      - design
-      synonyms:
-        brainstorming:
-        - thinking
-        - idea
-    html_template:
-      haml: 
-      css: 
-
-
-The config file is stored in `~/.doingrc`, and a skeleton file is created on the first run. Just run `doing` on its own to create the file.
-
-### Per-folder configuration
-
-Any options found in a `.doingrc` anywhere in the hierarchy between your current folder and your home folder will be appended to the base configuration, overriding or extending existing options. This allows you to put a `.doingrc` file into the base of a project and add specific configurations (such as default tags) when working in that project on the command line. These can be cascaded, with the closest `.doingrc` to your current directory taking precedence, though I'm not sure why you'd want to deal with that.
-
-Possible uses:
-
-- Define custom HTML output on a per-project basis using the html_template option for custom templates. Customize time tracking reports based on project or client.
-- Define `default_tags` for a project so that every time you `doing now` from within that project directory or its subfolders, it gets tagged with that project automatically.
-
-Any part of the configuration can be copied into these local files and modified. You only need to include the parts you want to change or add.
-
-### Doing file location
-
-The one thing you'll probably want to adjust is the file that the notes are stored in. That's the `doing_file` key:
-
-    doing_file: /Users/username/Dropbox/nvALT2.2/?? What was I doing.md
-
-I keep mine in my nvALT folder for quick access and syncing between machines. If desired, you can give it a `.taskpaper` extension to make it more recognizable to other applications. (If you do that in nvALT, make sure to add `taskpaper` as a recognized extension in preferences).
-
-### "Current actions" section
-
-You can rename the section that holds your current tasks. By default, this is `Currently`, but if you have some other bright idea, feel free:
-
-    current_section: Currently
-
-### Default editors
-
-The setting `editor_app` only applies to Mac OS X users. It's the default application that the command `doing open` will open your WWID file in. Personally, I use `editor_app: TaskPaper`. If this is blank, it will be opened by whatever the system default is for the doing file extension (default is `.md`), or you can use `-a app_name` or `-b bundle_id` to override.
-
-You can define a separate app to open the config file in when running `doing config`. The key for this is `config_editor_app`.
-
-In the case of the `doing now -e` command, your `$EDITOR` environment variable will be used to complete the entry text and notes. Set it in your `~/.bash_profile` or whatever is appropriate for your system:
-
-    export EDITOR="mate -w"
-
-The only requirements are that your editor be launchable from the command line and able to "wait." In the case of Sublime Text and TextMate, just use `-w` like this: `export EDITOR="subl -w"`.
-
-### Templates
-
-The config also contains templates for various command outputs. Include placeholders by placing a % before the keyword. The available tokens are:
-
-- `%title`: the "what was I doing" entry line
-- `%date`: the date based on the template's `date_format` setting
-- `%shortdate`: a custom date formatter that removes the day/month/year from the entry if they match the current day/month/year
-- `%note`: Any note in the entry will be included here, a newline and tabs are automatically added.
-- `%odnote`: The notes with a leading tab removed (outdented note)
-- `%chompnote`: Notes on one line, beginning and trailing whitespace removed.
-- `%section`: The section/project the entry is currently in
-- `%hr`: a horizontal rule (`-`) the width of the terminal
-- `%hr_under`: a horizontal rule (`_`) the width of the terminal
-- `%n`: inserts a newline
-- `%t`: inserts a tab
-- `%[color]`: color can be `black`, `red`, `green`, `blue`, `yellow`, `magenta`, `cyan`, or `white`
-    - you can prefix `bg` to affect background colors (`%bgyellow`)
-    - prefix `bold` and `boldbg` for strong colors (`%boldgreen`, `%boldbgblue`)
-    - there are some random special combo colors. Use `doing colors` to see the list
-- `%interval`: when used with the `-t` switch on the `show` command, it will display the time between a timestamp or _@start(date)_ tag and the _@done(date)_ tag, if it exists. Otherwise, it will remain empty.
-
-Date formats are based on Ruby [`strftime`](http://www.ruby-doc.org/stdlib-2.1.1/libdoc/date/rdoc/Date.html#method-i-strftime) formatting. You can try it out [here](http://strftime.net).
-
-My normal template for the `recent` command looks like this:
-
-    recent:
-      date_format: '%_I:%M%P'
-      template: '%date > %title%odnote'
-      wrap_width: 88
-
-And it outputs:
-    
-    $ doing recent 3
-     4:30am > Made my `console` script smarter...
-        Checks first argument to see if it's a file, if it is, that's the log
-
-        Else, it checks the first argument for a ".log" suffix and does a search in the user
-        application logs with `find` for it.
-
-        Otherwise, system.log.
-
-        I also made an awesome Cope wrapper for it...
-    12:00pm > Working on `doing` again.
-    12:45pm > I think this thing (doing) is ready to document and distribute
-    $ 
-
-You can get pretty clever and include line breaks and other formatting inside of double quotes. If you want multiline templates, just use `\n` in the template line, and after the next run it will be rewritten as proper YAML automatically.
-
-For example, this block:
-
-    recent:
-      date_format: '%_I:%M%P'
-      template: "\n%hr\n%date\n > %title%odnote\n%hr_under"
-      wrap_width: 100
-
-will rewrite to:
-
-    recent:
-      date_format: '%_I:%M%P'
-      template: |2-
-
-        %hr
-        %date
-         > %title%odnote
-        %hr_under
-      wrap_width: 100
-
-and output my recent entries like this:
-
-    $ doing recent 3
-    -----------------------------------------------------------------------
-     4:30am
-     > Made my `console` script smarter...
-        Checks first argument to see if it's a file, if it is, that's the log
-
-        Else, it checks the first argument for a ".log" suffix and does a search in the user application
-        logs with `find` for it.
-
-        Otherwise, system.log.
-
-        I also made an awesome Cope wrapper for it...
-    _______________________________________________________________________
-
-    -----------------------------------------------------------------------
-    12:00pm
-     > Working on `doing` again.
-    _______________________________________________________________________
-
-    -----------------------------------------------------------------------
-    12:45pm
-     > I think this thing (doing) is ready to document and distribute
-    _______________________________________________________________________
-
-    $ 
-
-The recent template can include a `count` key to specify the number of entries shown when run without an argument. Default is 10.
-
-### Custom views
-
-You can create your own "views" in the `~/.doingrc` file and view them with `doing view view_name`. Just add a section like this:
-
-    views:
-      old:
-        section: Archive
-        count: 5
-        wrap_width: 0
-        date_format: '%F %_I:%M%P'
-        template: '%date | %title%note'
-        order: asc
-        tags: done finished cancelled
-        tags_bool: ANY
-        only_timed: false
-        tag_sort: time
-        tag_order: asc
-        totals: true
-
-You can add additional custom views. Just nest them under the `views` key (indented two spaces from the edge). Multiple views would look like this:
-
-    views:
-      later:
-        section: Later
-        count: 5
-        wrap_width: 60
-        date_format: '%F %_I:%M%P'
-        template: '%date | %title%note'
-      old:
-        section: Old
-        count: 5
-        wrap_width: 0
-        date_format: '%F %_I:%M%P'
-        template: '%date | %title%note'
-
-The `section` key is the default section to pull entries from. Count and section can be overridden at runtime with the `-c` and `-s` flags. Setting `section` to `All` will combine all sections in the output.
-
-You can add new sections with `doing add_section section_name`. You can also create them on the fly by using the `-s section_name` flag when running `doing now`. For example, `doing now -s Misc just a random side note` would create the "just a random side note" entry in a new section called "Misc," if Misc didn't already exist.
-
-The `tags` and `tags_bool` keys allow you to specify tags that the view is filtered by. You can list multiple tags separated by spaces, and then use `tags_bool` to specify `ALL`, `ANY`, or `NONE` to determine how it handles the multiple tags.
-
-The `order` key defines the sort order of the output (asc or desc). This is applied _after_ the tasks are retrieved and cut off at the maximum number specified in `count`.
-
-You can include tag timers and totals in the output with `totals: true`. Control tag output using `tag_sort` (name or title) and `tag_order` (asc or desc). You can also output only timed entries using `only_timed: true`. All of these options can be overridden using flags on the `doing view` command.
-
-Regarding colors, you can use them to create very nice displays if you're outputting to a color terminal. Example:
-
-    color:
-      date_format: '%F %_I:%M%P'
-      section: Currently
-      count: 10
-      wrap_width: 0
-      template: '%boldblack%date %boldgreen| %boldwhite%title%default%note'
-
-Outputs: 
-
-![](http://ckyp.us/XKpj+)
-
-You can also specify a default output format for a view. Most of the optional output formats override the template specification (`html`, `csv`, `json`). If the `view` command is used with the `-o` flag, it will override what's specified for the view in the config.
-
-### Colors
-
-You can use the following colors in view templates. Set a foreground color with a named color:
-
-    %black
-    %red
-    %green
-    %yellow
-    %blue
-    %magenta
-    %cyan
-    %white
-
-You can also add a background color (`%bg[color]`) by placing one after the foreground color:
-
-    %white%bgblack
-    %black%bgred
-    ...etc.
-
-There are bold variants for both foreground and background colors
-
-    %boldblack
-    %boldred
-    ... etc.
-
-    %boldbgblack
-    %boldbgred
-    ... etc.
-
-And a few special colors you'll just have to try out to see (or just run `doing colors`):
-
-    %softpurple
-    %hotpants
-    %knightrider
-    %flamingo
-    %yeller
-    %whiteboard
-
-Any time you use one of the foreground colors it will reset the bold and background settings to their default automatically. You can force a reset to default terminal colors using `%default`.
-
-### HTML Templates
-
-For commands that provide an HTML output option, you can customize the templates used for markup and CSS. The markup uses [HAML](http://haml.info/), and the styles are pure CSS.
-
-To export the default configurations for customization, use `doing templates --type=[HAML|CSS]`. This will output to STDOUT where you can pipe it to a file, e.g. `doing templates --type=HAML > my_template.haml`. You can modify the markup, the CSS, or both.
-
-Once you have either or both of the template files, edit `.doingrc` and look for the `html_template:` section. There are two subvalues, `haml:` and `css:`. Add the path to the templates you want to use. A tilde may be substituted for your home directory, e.g. `css: ~/styles/doing.css`.
-
-### Autotagging
-
-Keywords in your entries can trigger automatic tagging, just to make life easier. There are three tools available: default tags, whitelisting, and synonym tagging.
-
-Default tags are tags that are applied to every entry. You probably don't want to add these in the root configuration, but using a local `.doingrc` in a project directory that defines default tags for that project allows anything added from that directory to be tagged automatically. A local `.doingrc` in my Marked development directory might contain:
-
-    ---
-    default_tags: [marked,coding]
-
-And anything I enter while in the directory gets tagged with _@marked_ and _@coding_.
-
-A whitelist is a list of words that should be converted directly into _@tags_. If my whitelist contains "design" and I type `doing now working on site design`, that's automatically converted to "working on site @design."
-
-Synonyms allow you to define keywords that will trigger their parent tag. If I have a tag called _@design_, I can add "typography" as a synonym. Then entering `doing now working on site typography` will become "working on site typography @design."
-
-White lists and synonyms are defined like this:
-
-    autotag:
-      synonyms:
-        design:
-        - typography
-        - layout
-        brainstorming
-        - thinking
-        - idea
-      whitelist:
-      - brainstorming
-      - coding
-
-Note that you can include a tag with synonyms in the whitelist as well to tag it directly when used.
-
-## Usage
-
-    doing [global options] command [command options] [arguments...]
-
-### Global options:
-
-    -f, --doing_file=arg - Specify a different doing_file (default: none)
-    --help               - Show this message
-    --[no-]notes         - Output notes if included in the template (default: enabled)
-    --stdout             - Send results report to STDOUT instead of STDERR
-    --version            - Display the program version
-    -x, --[no-]noauto    - Exclude auto tags and default tags
-
-### Commands:
-
-    help           - Shows a list of commands and global options
-    help [command] - Shows help for any command (`doing help now`)
-
-#### Adding entries:
-
-    now, next     - Add an entry
-    later         - Add an item to the Later section
-    done, did     - Add a completed item with @done(date). No argument finishes last entry.
-    meanwhile     - Finish any @meanwhile tasks and optionally create a new one
-    again, resume - Duplicate the last entry as new entry (without @done tag)
-
-##### now
-
-The `doing now` command adds an entry to the "Currently" section by default. It accepts `-s section_name` to send the new entry straight to a non-default section. It also accepts `--back=AMOUNT` to let you specify a start date in the past using "natural language." For example, `doing now --back=25m ENTRY` or `doing now --back="yesterday 3:30pm" ENTRY`.
-
-You can finish the last unfinished task when starting a new one using `doing now` with the `-f` switch. It will look for the last task not marked _@done_ and add the _@done_ tag with the start time of the new task (either the current time or what you specified with `--back`).
-
-> __Examples:__
-> 
-> - `doing now Working on project X` --- Add a new entry at the current time
-> - `doing now --section=Projects Working on @projectX` --- Add a new entry to a section titled "Projects"
-> - `doing now --back 30m` --- Add a new entry with a backdated start time, indicating you've been working on it for 30 minutes already
-> - `doing now --back 8am` --- Backdate a new entry to a specific time
-> - `doing now -f Starting the next thing` --- Add a new entry at the current time, and add a @done tag to the previous item with the current time as its completion date
-> - `doing now -f --back 30m Working on something new` --- Add a new entry and complete the last entry, but use a timestamp from 30 minutes ago for both.
-
-##### done/finish
+If there's something I want to look at later but doesn't need to be added to a task list or tracker, I can type `doing later check out the pinboard bookmarks from macdrifter`. When I get back to my computer --- or just need a refresher after a distraction --- I can type `doing last` to see what the last thing on my plate was. I can also type `doing recent` (or just `doing`) to get a list of the last few entries. `doing today` gives me everything since midnight for the current day, making it easy to see what I've accomplished over a sleepless night. 
 
-`doing done` is used to add an entry that you've already completed. Like `now`, you can specify a section with `-s section_name`. You can also skip straight to the Archive with `-a`.
+Doing has over 30 commands for tracking your status, recording your time, and analyzing the results.
 
-`doing done` can also backdate entries using natural language with `--back 15m` or `--back "3/15 3pm"`. That will modify the starting timestamp of the entry. Used on its own, it will set the start date, and the finish date will be the current time. You can also use `--took 1h20m` or `--took 1:20` to set the finish date based on a "natural language" time interval. If `--took` is used without `--back`, then the start date is adjusted (`--took` interval is subtracted) so that the completion date is the current time.
+See [the wiki](https://github.com/ttscoff/doing/wiki) for installation and usage instructions.
 
-When used with `doing done`, `--back` and `--took` allow time intervals to be accurately counted when entering items after the fact. `--took` is also available for the `doing finish` command, but cannot be used in conjunction with `--back`. (In `finish` they both set the end date, and neither has priority. `--back` allows specific days/times, `--took` uses time intervals.)
-
-> __Examples:__
->
-> - `doing done --back 1h The thing I just did` --- Add an entry for a completed task that you started an hour ago and just finished 
-> - `doing done --back 1h --took 20m The thing I just finished` --- Record an entry you started an hour ago and finished 20 minutes later
-> - `doing done --took 20m` --- Finish the last task but change the finish date so that the total elapsed time is only 20 minutes (if the finish date would be in the future, start date will be adjusted accordingly)
-
-All of these commands accept a `-e` argument. This opens your command line editor (as defined in the environment variable `$EDITOR`). Add your entry, save the temp file, and close it. The new entry is added. Anything after the first line is included as a note on the entry.
-
-`doing again` (or `doing resume`) will duplicate the last @done entry (most recently completed) with a new start date (and without the @done tag). To resume the last entry matching specific tags, use `--tag=TAG`. You can specify multiple tags by separating with a comma. Multiple tags are combined with 'AND' by default (all tags must exist on the entry to match), but you can use `--bool=` to set it to 'OR' or 'NOT'. By default the new entry will be added to the same section as the matching entry, but you can specify a section with `--in=SECTION`.
-
-`doing meanwhile` is a special command for creating and finishing tasks that may have other entries come before they're complete. When you create an entry with `doing meanwhile [entry text]`, it will automatically complete the last _@meanwhile_ item (dated _@done_ tag) and add the _@meanwhile_ tag to the new item. This allows time tracking on a more general basis, and still lets you keep track of the smaller things you do while working on an overarching project. The `meanwhile` command accepts `--back [time]` and will backdate the _@done_ tag and start date of the new task at the same time. Running `meanwhile` with no arguments will simply complete the last _@meanwhile_ task. 
-
-See `doing help meanwhile` for more options.
-
-#### Modifying entries:
-
-    finish      - Mark last X entries as @done
-    cancel      - Mark last X entries as @done without completion date
-    tag         - Tag last entry
-    note        - Add a note to the last entry
-
-##### Finishing
-
-`doing finish` by itself is the same as `doing done` by itself. It adds _@done(timestamp)_ to the last entry. It also accepts a numeric argument to complete X number of tasks back in history (0 affects all entries). Add `-a` to also archive the affected entries.
-
-`doing finish` also provides an `--auto` flag, which you can use to set the end time of any entry to 1 minute before the start time of the next. Running a command such as `doing finish --auto 10` will go through the last 10 entries and sequentially update any without a _@done_ tag with one set to the time just before the next entry in the list.
-
-As mentioned above, `finish` also accepts `--back "2 hours"` (sets the finish date from time now minus interval) or `--took 30m` (sets the finish date to time started plus interval) so you can accurately add times to completed tasks, even if you don't do it in the moment.
-
-Both `done` and `finish` accept an `--archive` switch which immediately moves the completed entries to the Archive section with a `@from(Project)` tag.
-
-You can finish the last entry containing a specific tag or combination of tags using the `--tag` flag. Multiple tags are separated by commas. By default tags are combined with an AND boolean, meaning the entry must contain all specified tags to be considered. For example, to finish the last entry containing both "@work" and "@project1", you would use:
-
-    doing finish --tag=work,project1
-
-You can change the boolean using `--bool=OR` (last entry containing any of the specified tags) or `--bool=NOT` (last entry containing none of the tags).
-
-You can also include a `--no-date` switch to add `@done` without a finish date, meaning no time is tracked for the task. `doing cancel` is an alias for this. Like `finish`, `cancel` accepts a count to act on the last X entries, as well as `--archive` and `--section` options. `cancel` also accepts the `--tag` and `--bool` flags for tag filtering.
-
-By default `doing finish` works on a single entry, the last entry or the most recent entry matching a `--tag` or `--search` query. Specifying `doing finish 10` would finish any unfinished entries within the last 10 entries. In the case of `--tag` or `--search` queries, the count serves as the maximum number of matches doing will act on, sorted in reverse date order (most recent first). A count of 0 will disable the limit entirely, acting on all matching entries.
-
-Both `finish` and `cancel` accept `--unfinished` as an argument. This causes them to act on the last entry not already marked @done, no matter how far back it's dated or how many @done entries come after it. You can use `doing finish --unfinished X -s SECTION` to finish the last X unfinished entries in SECTION.
-
-##### Tagging and Autotagging
-
-`tag` adds one or more tags to the last entry, or specify a count with `-c X`. Tags are specified as basic arguments, separated by spaces. For example:
-
-    doing tag -c 3 client cancelled
-
-... will mark the last three entries as _@client @cancelled_. Add `-r` as a switch to remove the listed tags instead.
-
-You can optionally define keywords for common tasks and projects in your `.doingrc` file. When these keywords appear in an item title, they'll automatically be converted into @tags. The `whitelist` tags are exact (but case insensitive) matches. 
-
-You can also define `synonyms`, which will add a tag at the end based on keywords associated with it. When defining `synonym` keys, be sure to indent but _not_ hyphenate the keys themselves, while hyphenating the list of synonyms at the same indent level as their key. See `playing` and `writing` in the example below for illustration. Follow standard YAML syntax.
-
-To add autotagging, include a section like this in your `~/.doingrc` file:
-
-    autotag:
-      whitelist:
-      - doing
-      - mindmeister
-      - marked
-      - playing
-      - working
-      - writing
-      synonyms:
-        playing:
-        - hacking
-        - tweaking
-        - toying
-        - messing
-        writing:
-        - blogging
-        - posting
-        - publishing
-
-###### Tag transformation
-
-You can include a `transform` section in the autotag config which contains pairs of regular expressions and replacement patterns separated by a colon. These will be used to look at existing tags in the text and generate additional tags from them. For example:
-
-  autotag:
-    transform:
-    - (\w+)-\d+:$1
-
-This creates a search pattern looking for a string of word characters followed by a hyphen and one or more digits, e.g. `@projecttag-12`. Do not include the @ symbol in the pattern. The replacement (`$l`) indicates that the first matched group (in parenthesis) should be used to generate the new tag, resulting in `@projecttag` being added to the entry.
-
-##### Annotating
-
-`note` lets you append a note to the last entry. You can specify a section to grab the last entry from with `-s section_name`. `-e` will open your `$EDITOR` for typing the note, but you can also just include it on the command line after any flags. You can also pipe a note in on STDIN (`echo "fun stuff"|doing note`). If you don't use the `-r` switch, new notes will be appended to the existing notes, and using the `-e` switch will let you edit and add to an existing note. The `-r` switch will remove/replace a note; if there's new note text passed when using the `-r` switch, it will replace any existing note. If the `-r` switch is used alone, any existing note will be removed.
-
-You can also add notes at the time of entry by using the `-n` or `--note` flag with `doing now`, `doing later`, or `doing done`. If you pass text to any of the creation commands which has multiple lines, everything after the first line break will become the note.
-
-If a string passed to `now`, `later`, or `done` has a parenthetical at the end, the parenthetical will be removed from the title and its contents added as a note. So `doing now Working on @project1 (Adding some unit tests)` would create an entry titled "Working on @project1" with a note "Adding some unit tests." This is the equivalent of `doing now Working on @project1 -n "Adding some unit tests"`.
-
-#### Displaying entries:
-
-    show      - List all entries
-    recent    - List recent entries
-    today     - List entries from today
-    yesterday - List entries from yesterday
-    last      - Show the last entry
-    grep      - Show entries matching text or pattern
-
-`doing show` on its own will list all entries in the "Currently" section. Add a section name as an argument to display that section instead. Use "all" to display all entries from all sections.
-
-You can filter the `show` command by tags. Simply list them after the section name (or `all`). The boolean defaults to `ANY`, meaning any entry that contains any of the listed tags will be shown. You can use `-b ALL` or `-b NONE` to change the filtering behavior: `doing show all done cancelled -b NONE` will show all tasks from all sections that do not have either _@done_ or _@cancelled_ tags.
-
-Use `-c X` to limit the displayed results. Combine it with `-a newest` or `-a oldest` to choose which chronological end it trims from. You can also set the sort order of the output with `-s asc` or `-s desc`.
-
-The `show` command can also show the time spent on a task if it has a _@done(date)_ tag with the `-t` option. This requires that you include a `%interval` token in template -> default in the config. You can also include _@start(date)_ tags, which override the timestamp when calculating the intervals.
-
-If you have a use for it, you can use `-o csv` on the show or view commands to output the results as a comma-separated CSV to STDOUT. Redirect to a file to save it: `doing show all done -o csv > ~/Desktop/done.csv`. You can do the same with `-o json`.
-
-`doing yesterday` is great for stand-ups (thanks to [Sean Collins](https://github.com/sc68cal) for that!). Note that you can show yesterday's activity from an alternate section by using the section name as an argument (e.g. `doing yesterday archive`).
-
-All of the display commands (view, show, today, yesterday, search) support date ranges in addition to other filtering options. Results can be narrowed to a date/time span using `--before DATE` and `--after DATE`. The `DATE` accepts a natural language string but works best in formats like `10/20/21` or `2021-05-13 3pm` (or shortened to just `5/13 3pm`). For the `today` and `yesterday` commands the `DATE` should just be a time, e.g. `12pm` or `15:00`, and results will be filtered within the timespan for just that day. Both flags are optional, and you can use just `--before` to get everything older than a certain date, or use just `--after` to get everything newer.
-
-`doing on` allows for full date ranges and filtering. `doing on saturday`, or `doing on one month to today` will give you ranges. You can use the same terms with the `show` command by adding the `-f` or `--from` flag. `doing show @done --from "monday to friday"` will give you all of your completed items for the last week (assuming it's the weekend). There's also `doing since` a simple alias for `doing on PAST_DATE to now`, e.g. `doing since monday`.
-
-You can also show entries matching a search string with `doing grep` (synonym `doing search`). If you want to search with regular expressions or for an exact match, surround your search query with forward slashes, e.g. `doing search /project name/`. If you pass a search string without slashes, it's treated as a fuzzy search string, meaning matches can be found as long as the characters in the search string are in order and with no more than three other characters between each. By default searches are across all sections, but you can limit it to one with the `-s SECTION_NAME` flag. Searches can be displayed with the default template, or output as HTML, CSV, or JSON.
-
-##### Modifying the last entry
-
-If you want to make a change to the last entry added, use `doing last -e`. The `-e` flag opens the last entry (including note) in your editor, and when you close your editor, your doing file will be updated with any changes you made to the entry.
-
-You can choose the last entry in a specific section by including the `-s` flag, so `doing last -s Later -e` would edit the most recent entry in the Later section.
-
-You can also use text search or a tag filter to get an entry earlier than the most recent one. A tag search with `doing last --tag=project1 -e` will edit the last entry tagged `@project1`. Multiple tags can be combined with commas, and you can use `--bool` to specify whether the search is `AND` (matches all tags given), `OR` (matches any tag given), or `NOT` (matches none of the tags).
-
-You can edit the last entry that matches a search string with `--search=QUERY`. `QUERY` can either be a raw string, or you can surround it with slashes to search by regex (`doing last --search="/project./" -e`). If the string is raw text, fuzzy matching will be used, so the characters must be in order but can be separated by up to three other characters.
-
-Both `--tag` and `--search` can be constrained to a single section with `-s SECTION`.
-
-#### Views
-
-    view     - Display a user-created view
-    views    - List available custom views
-
-Display any of the custom views you make in `~/.doingrc` with the `view` command. Use `doing views` to get a list of available views. Any time a section or view is specified on the command line, fuzzy matching will be used to find the closest match. Thus, `lat` will match `Later`, etc..
-
-#### Sections
-
-    sections    - List sections
-    choose      - Select a section to display from a menu
-    add_section - Add a new section to the "doing" file
-
-#### Utilities
-
-    archive  - Move entries between sections
-    open     - Open the "doing" file in an editor (OS X)
-    config   - Edit the default configuration
-
-#### Archiving
-
-    COMMAND OPTIONS
-        -k, --keep=arg - Count to keep (ignored if archiving by tag) (default: 5)
-        -t, --to=arg   - Move entries to (default: Archive)
-        -b, --bool=arg - Tag boolean (default: AND)
-
-The `archive` command will move entries from one section (default: `Currently`) to another section (default: `Archive`). 
-
-`doing archive` on its own will move all but the most recent 5 entries from `currently` into the archive.
-
-`doing archive other_section` will archive from `other_section` to `Archive`.
-
-`doing archive other_section -t alternate` will move from `other_section` to `alternate`. You can use the `-k` flag on any of these to change the number of items to leave behind. To move everything, use `-k 0`.
-
-You can also use tags to archive. You define the section first, and anything following it is treated as tags. If your first argument starts with `@`, it will assume all sections and assume any following arguments are tags.
-
-By default, tag archiving uses an `AND` boolean, meaning all the tags listed must exist on the entry for it to be moved. You can change this behavior with `-b OR` or `-b NONE` (`ALL` and `ANY` also work). 
-
-Example: Archive all Currently items for _@client_ that are marked _@done_
-
-    doing archive @client @done
-
-##### Importing
-
-Doing can currently only import tasks from Timing.app reports. If you want to sync up your Doing file with Timing's tracking:
-
-1. Open Timing and go to Reports
-2. Set the date span you want to import into doing
-3. Group by Project, Then by None
-4. Include Tasks with Title, (not as subgroup), Timespan, and Notes
-5. Uncheck App Usage
-6. Set File Format to JSON and Duration format to "XX:YY:ZZ"
-7. Include short entries if desired
-8. Export the report to a new file
-
-Now you can run `doing import --type timing -s SECTION PATH`, where SECTION is the name of the section you want to import the entries to (defauts to Currently), and PATH is the path to the JSON file. You can also add a tag (or tags) to all entries, or a custom prefix.
-
-(`--type timing` is the only option right now, so it doesn't need to be included)
-
-    # Import entries to Projects section and add @timing to all new entries
-    doing import -s Projects --tag=timing "~/Desktop/All Activities.json"
-
-    # Import to default section (Currently) and prefix entries with '[Imported]'
-    doing import --prefix="[Imported]" "~/Desktop/All Activities.json"
-
-#### Interactive Usage
-
-FuzzyFileFinder (`fzf`) is included with doing (<https://github.com/junegunn/fzf>), and you can use `doing select` to get a menu of all your items (or items in a given section) which can be searched with fuzzy matching. The menu allows multiple selections to be acted on directly.
-
-To use the menu, type a search string or use the arrow keys to navigate up and down. Tip: searching is "fuzzy" by default, but you can start your search with a single quote (`'`) to force an exact match. Press tab on an entry you'd like to perform an action on. A marker will show up on the left indicating the entry is selected. Repeat the process and select as many entries as needed. When you hit Return, the selection will be passed back to doing. Use Control-A to select all visible entries.
-
-Doing can perform several functions with this menu. Not all of doing's features are available, but the core functionality you'd need is there, plus you can open the selected entries on one page in your text editor, make changes to them, and when you save and close the entries are updated accordingly. This allows editing of everything from timestamps to tags to notes.
-
-If no actions are specified, an interactive menu of options will be
-presented.
-
-Run `doing help select` for a list of options:
-
-    -a, --archive         - Archive selected items
-    -c, --cancel          - Cancel selected items (add @done without timestamp)
-    -d, --delete          - Delete selected items
-    -e, --editor          - Edit selected item(s)
-    -f, --finish          - Add @done with current time to selected item(s)
-    --flag                - Add flag to selected item(s)
-    -m, --move=SECTION    - Move selected items to section (default: none)
-    -o, --output=FORMAT   - Output format for export (doing|taskpaper|csv|html|json|template|timeline) (default: none)
-    -q, --query=QUERY     - Initial search query for filtering (default: none)
-    -r, --remove          - Reverse -c, -f, --flag, and -t (remove instead of adding)
-    -s, --section=SECTION - Select from a specific section (default: none)
-    --save_to=FILE        - Save selected entries to file using --output format (default: none)
-    -t, --tag=TAG         - Tag selected entries (default: none)
-
-For example, `doing select -d -a` would present the menu, and then mark selected entries as @done (with timestamp) and move them to the Archive section.
-
-Multiple actions can be performed at once by combining options. You can also combine the `--editor` switch with any other options. Other actions will be performed first, then the entries --- with any modifications performed --- will be presented in the editor for tweaking.
-
-**Note:** when using the `--editor` flag to open selections in your text editor, entries will be separated by `---` lines. These must remain in place for doing to track the changes. You can do anything you want to the entries, modify dates, change text, add notes, etc., as long as you leave the dividers in place. You can even delete an entry entirely, leaving the dividers around the missing line and the entry will be removed from your doing file when you save and exit the editor.
-
----
-
-## Extras
-
-### Shell completion
-
-__Bash:__ See the file [`doing.completion.bash`](https://github.com/ttscoff/doing/blob/master/doing.completion.bash) in the git repository for full bash completion. Thanks to [fcrespo82](https://github.com/fcrespo82) for getting it [started](https://gist.github.com/fcrespo82/9609318).
-
-
-__Zsh:__ See the file [`doing.completion.zsh`](https://github.com/ttscoff/doing/blob/master/doing.completion.zsh) in the git repository for zsh completion. Courtesy of [Gabe Anzelini](https://github.com/gabeanzelini).
-
-__Fish:__ See the file [`doing.fish`](https://github.com/ttscoff/doing/blob/master/doing.fish) in the git repository for Fish completion. This is the least complete of all of the completions, but it will autocomplete the first level of subcommands, and your custom sections and views for the `doing show` and `doing view` commands.
-
-### Launchbar/Alfred
+## Launchbar/Alfred
 
 The LaunchBar action requires that `doing` be available in `/usr/local/bin/doing`. If it's not (because you're using RVM or similar), you'll need to symlink it there. Running the action with Return will show the latest 9 items from Currently, along with any time intervals recorded, and includes a submenu of Timers for each tag.
 
@@ -682,52 +30,21 @@ Pressing Spacebar and typing allows you to add a new entry to currently. You an
 
 Point of interest, the LaunchBar Action makes use of the `-o json` flag for outputting JSON to the action's script for parsing.
 
-<!--GITHUB-->See <https://brettterpstra.com/projects/doing/> for the download.<!--END GITHUB-->
+<!--GITHUB-->
+
+See the [doing project on BrettTerpstra.com](https://brettterpstra.com/projects/doing/) for the download.
+
+<!--END GITHUB-->
 <!--JEKYLL
 {% download 117 %} 
 -->
 
 Evan Lovely has [created an Alfred workflow as well](http://www.evanlovely.com/blog/technology/alfred-for-terpstras-doing/).
 
-## Troubleshooting
-
-### Errors after "Successfully installed..."
-
-If you get errors in the terminal immediately after a message like:
-
-    Successfully installed doing-x.x.x
-    2 gems installed
-
-...it may just be documentation related. If running `doing` works, you can ignore them. If not, try running the install command again with `--no-document`:
-
-    $ gem install --no-document doing
-
-### Command not found
-
-If running `doing` after a successful install gives you a "command not found" error, then your gem path isn't in your `$PATH`, meaning the system can't find it. To locate the gem and link it into your path, you can try this:
-
-    cd $GEM_PATH/bin
-    ln -s doing /usr/local/bin/
-
-Then try running `doing` and see if it works.
-
-### Encoding errors
-
-Ruby is rife with encoding inconsistencies across platforms and versions. Feel free to file issues (see below).
-
-### Support
-
-
-As a free project, `doing` isn't heavily supported, but you can get support from myself and other users on GitHub. If you run into a replicatable bug in your environment, please [post an issue](https://github.com/ttscoff/doing/issues) and include your platform, OS version, and the result of `ruby -v`, along with a copy/paste of the error message. To get a more verbose error message, try running `GLI_DEBUG=true doing [...]` for a full trace.
-
-Please try not to email me directly about GitHub projects.
-
-### Developer notes
-
-Feel free to [poke around](http://github.com/ttscoff/doing/), I'll try to add more comments in the future (and retroactively).
-
 <!--END README-->
 
+---
+
 PayPal link: [paypal.me/ttscoff](https://paypal.me/ttscoff)
 
 ## Changelog