docker-engine 0.1.1 → 0.2.0

data/lib/docker_engine/resources/exec.rb

@@ -0,0 +1,91 @@
+# frozen_string_literal: true
+
+module DockerEngine
+  module Resources
+    class Exec
+      # Return low-level information about an exec instance.
+      #
+      # @overload inspect_(id, request_options: {})
+      #
+      # @param id [String] Exec instance ID
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [DockerEngine::Models::ExecInspectResponse]
+      #
+      # @see DockerEngine::Models::ExecInspectParams
+      def inspect_(id, params = {})
+        @client.request(
+          method: :get,
+          path: ["exec/%1$s/json", id],
+          model: DockerEngine::Models::ExecInspectResponse,
+          options: params[:request_options]
+        )
+      end
+
+      # Resize the TTY session used by an exec instance. This endpoint only works if
+      # `tty` was specified as part of creating and starting the exec instance.
+      #
+      # @overload resize(id, h:, w:, request_options: {})
+      #
+      # @param id [String] Exec instance ID
+      #
+      # @param h [Integer] Height of the TTY session in characters
+      #
+      # @param w [Integer] Width of the TTY session in characters
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [nil]
+      #
+      # @see DockerEngine::Models::ExecResizeParams
+      def resize(id, params)
+        parsed, options = DockerEngine::ExecResizeParams.dump_request(params)
+        @client.request(
+          method: :post,
+          path: ["exec/%1$s/resize", id],
+          query: parsed,
+          model: NilClass,
+          options: options
+        )
+      end
+
+      # Starts a previously set up exec instance. If detach is true, this endpoint
+      # returns immediately after starting the command. Otherwise, it sets up an
+      # interactive session with the command.
+      #
+      # @overload start(id, console_size: nil, detach: nil, tty: nil, request_options: {})
+      #
+      # @param id [String] Exec instance ID
+      #
+      # @param console_size [Array<Integer>, nil] Initial console size, as an `[height, width]` array.
+      #
+      # @param detach [Boolean] Detach from the command.
+      #
+      # @param tty [Boolean] Allocate a pseudo-TTY.
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [nil]
+      #
+      # @see DockerEngine::Models::ExecStartParams
+      def start(id, params = {})
+        parsed, options = DockerEngine::ExecStartParams.dump_request(params)
+        @client.request(
+          method: :post,
+          path: ["exec/%1$s/start", id],
+          body: parsed,
+          model: NilClass,
+          options: options
+        )
+      end
+
+      # @api private
+      #
+      # @param client [DockerEngine::Client]
+      def initialize(client:)
+        @client = client
+      end
+    end
+  end
+end

data/lib/docker_engine/resources/images.rb

@@ -58,7 +58,7 @@ module DockerEngine
       #
       # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [Array<DockerEngine::Models::ImageDeleteResponseItem>]
+      # @return [Array<DockerEngine::Models::DeleteItem>]
       #
       # @see DockerEngine::Models::ImageDeleteParams
       def delete(name, params = {})
@@ -67,7 +67,371 @@ module DockerEngine
           method: :delete,
           path: ["images/%1$s", name],
           query: parsed,
-          model: DockerEngine::Internal::Type::ArrayOf[DockerEngine::Models::ImageDeleteResponseItem],
+          model: DockerEngine::Internal::Type::ArrayOf[DockerEngine::DeleteItem],
+          options: options
+        )
+      end
+
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImageBuildParams} for more details.
+      #
+      # Build an image from a tar archive with a `Dockerfile` in it.
+      #
+      # The `Dockerfile` specifies how the image is built from the tar archive. It is
+      # typically in the archive's root, but can be at a different path or have a
+      # different name by specifying the `dockerfile` parameter.
+      # [See the `Dockerfile` reference for more information](https://docs.docker.com/engine/reference/builder/).
+      #
+      # The Docker daemon performs a preliminary validation of the `Dockerfile` before
+      # starting the build, and returns an error if the syntax is incorrect. After that,
+      # each instruction is run one-by-one until the ID of the new image is output.
+      #
+      # The build is canceled if the client drops the connection by quitting or being
+      # killed.
+      #
+      # @overload build(body:, buildargs: nil, cachefrom: nil, cpuperiod: nil, cpuquota: nil, cpusetcpus: nil, cpushares: nil, dockerfile: nil, extrahosts: nil, forcerm: nil, labels: nil, memory: nil, memswap: nil, networkmode: nil, nocache: nil, outputs: nil, platform: nil, pull: nil, q: nil, remote: nil, rm: nil, shmsize: nil, squash: nil, t: nil, target: nil, version: nil, x_registry_config: nil, request_options: {})
+      #
+      # @param body [Pathname, StringIO, IO, String, DockerEngine::FilePart] Body param
+      #
+      # @param buildargs [String] Query param: JSON map of string pairs for build-time variables. Users pass these
+      #
+      # @param cachefrom [String] Query param: JSON array of images used for build cache resolution.
+      #
+      # @param cpuperiod [Integer] Query param: The length of a CPU period in microseconds.
+      #
+      # @param cpuquota [Integer] Query param: Microseconds of CPU time that the container can get in a CPU period
+      #
+      # @param cpusetcpus [String] Query param: CPUs in which to allow execution (e.g., `0-3`, `0,1`).
+      #
+      # @param cpushares [Integer] Query param: CPU shares (relative weight).
+      #
+      # @param dockerfile [String] Query param: Path within the build context to the `Dockerfile`. This is ignored
+      #
+      # @param extrahosts [String] Query param: Extra hosts to add to /etc/hosts
+      #
+      # @param forcerm [Boolean] Query param: Always remove intermediate containers, even upon failure.
+      #
+      # @param labels [String] Query param: Arbitrary key/value labels to set on the image, as a JSON map of st
+      #
+      # @param memory [Integer] Query param: Set memory limit for build.
+      #
+      # @param memswap [Integer] Query param: Total memory (memory + swap). Set as `-1` to disable swap.
+      #
+      # @param networkmode [String] Query param: Sets the networking mode for the run commands during build. Support
+      #
+      # @param nocache [Boolean] Query param: Do not use the cache when building the image.
+      #
+      # @param outputs [String] Query param: BuildKit output configuration in the format of a stringified JSON a
+      #
+      # @param platform [String] Query param: Platform in the format os[/arch[/variant]]
+      #
+      # @param pull [String] Query param: Attempt to pull the image even if an older image exists locally.
+      #
+      # @param q [Boolean] Query param: Suppress verbose build output.
+      #
+      # @param remote [String] Query param: A Git repository URI or HTTP/HTTPS context URI. If the URI points t
+      #
+      # @param rm [Boolean] Query param: Remove intermediate containers after a successful build.
+      #
+      # @param shmsize [Integer] Query param: Size of `/dev/shm` in bytes. The size must be greater than 0. If om
+      #
+      # @param squash [Boolean] Query param: Squash the resulting images layers into a single layer.
+      # \*(Experimen
+      #
+      # @param t [String] Query param: A name and optional tag to apply to the image in the `name:tag` for
+      #
+      # @param target [String] Query param: Target build stage
+      #
+      # @param version [Symbol, DockerEngine::Models::ImageBuildParams::Version] Query param: Version of the builder backend to use.
+      #
+      # @param x_registry_config [String] Header param: This is a base64-encoded JSON object with auth configurations for
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [nil]
+      #
+      # @see DockerEngine::Models::ImageBuildParams
+      def build(params)
+        parsed, options = DockerEngine::ImageBuildParams.dump_request(params)
+        query_params =
+          [
+            :buildargs,
+            :cachefrom,
+            :cpuperiod,
+            :cpuquota,
+            :cpusetcpus,
+            :cpushares,
+            :dockerfile,
+            :extrahosts,
+            :forcerm,
+            :labels,
+            :memory,
+            :memswap,
+            :networkmode,
+            :nocache,
+            :outputs,
+            :platform,
+            :pull,
+            :q,
+            :remote,
+            :rm,
+            :shmsize,
+            :squash,
+            :t,
+            :target,
+            :version
+          ]
+        @client.request(
+          method: :post,
+          path: "build",
+          query: parsed.slice(*query_params),
+          headers: {
+            "content-type" => "application/octet-stream",
+            **parsed.except(:body, *query_params)
+          }.transform_keys(
+            x_registry_config: "x-registry-config"
+          ),
+          body: parsed[:body],
+          model: NilClass,
+          options: options
+        )
+      end
+
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImageBuildPruneParams} for more details.
+      #
+      # Delete builder cache
+      #
+      # @overload build_prune(all: nil, filters: nil, max_used_space: nil, min_free_space: nil, reserved_space: nil, request_options: {})
+      #
+      # @param all [Boolean] Remove all types of build cache
+      #
+      # @param filters [String] A JSON encoded value of the filters (a `map[string][]string`) to
+      #
+      # @param max_used_space [Integer] Maximum amount of disk space allowed to keep for cache
+      #
+      # @param min_free_space [Integer] Target amount of free disk space after pruning
+      #
+      # @param reserved_space [Integer] Amount of disk space in bytes to keep for cache
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [DockerEngine::Models::ImageBuildPruneResponse]
+      #
+      # @see DockerEngine::Models::ImageBuildPruneParams
+      def build_prune(params = {})
+        parsed, options = DockerEngine::ImageBuildPruneParams.dump_request(params)
+        @client.request(
+          method: :post,
+          path: "build/prune",
+          query: parsed.transform_keys(
+            max_used_space: "max-used-space",
+            min_free_space: "min-free-space",
+            reserved_space: "reserved-space"
+          ),
+          model: DockerEngine::Models::ImageBuildPruneResponse,
+          options: options
+        )
+      end
+
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImageCommitParams} for more details.
+      #
+      # Create a new image from a container
+      #
+      # @overload commit(author: nil, changes: nil, comment: nil, container: nil, pause: nil, repo: nil, tag: nil, args_escaped: nil, attach_stderr: nil, attach_stdin: nil, attach_stdout: nil, cmd: nil, domainname: nil, entrypoint: nil, env: nil, exposed_ports: nil, healthcheck: nil, hostname: nil, image: nil, labels: nil, network_disabled: nil, on_build: nil, open_stdin: nil, shell: nil, stdin_once: nil, stop_signal: nil, stop_timeout: nil, tty: nil, user: nil, volumes: nil, working_dir: nil, request_options: {})
+      #
+      # @param author [String] Query param: Author of the image (e.g., `John Hannibal Smith <hannibal@a-team.co
+      #
+      # @param changes [String] Query param: `Dockerfile` instructions to apply while committing
+      #
+      # @param comment [String] Query param: Commit message
+      #
+      # @param container [String] Query param: The ID or name of the container to commit
+      #
+      # @param pause [Boolean] Query param: Whether to pause the container before committing
+      #
+      # @param repo [String] Query param: Repository name for the created image
+      #
+      # @param tag [String] Query param: Tag name for the create image
+      #
+      # @param args_escaped [Boolean, nil] Body param: Command is already escaped (Windows only)
+      #
+      # @param attach_stderr [Boolean] Body param: Whether to attach to `stderr`.
+      #
+      # @param attach_stdin [Boolean] Body param: Whether to attach to `stdin`.
+      #
+      # @param attach_stdout [Boolean] Body param: Whether to attach to `stdout`.
+      #
+      # @param cmd [Array<String>] Body param: Command to run specified as a string or an array of strings.
+      #
+      # @param domainname [String] Body param: The domain name to use for the container.
+      #
+      # @param entrypoint [Array<String>] Body param: The entry point for the container as a string or an array of strings
+      #
+      # @param env [Array<String>] Body param: A list of environment variables to set inside the container in the
+      #
+      # @param exposed_ports [Hash{Symbol=>Object}, nil] Body param: An object mapping ports to an empty object in the form:
+      #
+      # @param healthcheck [DockerEngine::Models::Config::Healthcheck] Body param: A test to perform to check that the container is healthy.
+      #
+      # @param hostname [String] Body param: The hostname to use for the container, as a valid RFC 1123 hostname.
+      #
+      # @param image [String] Body param: The name (or reference) of the image to use when creating the contai
+      #
+      # @param labels [Hash{Symbol=>String}] Body param: User-defined key/value metadata.
+      #
+      # @param network_disabled [Boolean, nil] Body param: Disable networking for the container.
+      #
+      # @param on_build [Array<String>, nil] Body param: `ONBUILD` metadata that were defined in the image's `Dockerfile`.
+      #
+      # @param open_stdin [Boolean] Body param: Open `stdin`
+      #
+      # @param shell [Array<String>, nil] Body param: Shell for when `RUN`, `CMD`, and `ENTRYPOINT` uses a shell.
+      #
+      # @param stdin_once [Boolean] Body param: Close `stdin` after one attached client disconnects
+      #
+      # @param stop_signal [String, nil] Body param: Signal to stop a container as a string or unsigned integer.
+      #
+      # @param stop_timeout [Integer, nil] Body param: Timeout to stop a container in seconds.
+      #
+      # @param tty [Boolean] Body param: Attach standard streams to a TTY, including `stdin` if it is not clo
+      #
+      # @param user [String] Body param: Commands run as this user inside the container. If omitted, commands
+      #
+      # @param volumes [Hash{Symbol=>Object}] Body param: An object mapping mount point paths inside the container to empty
+      #
+      # @param working_dir [String] Body param: The working directory for commands to run in.
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [DockerEngine::Models::ImageCommitResponse]
+      #
+      # @see DockerEngine::Models::ImageCommitParams
+      def commit(params = {})
+        parsed, options = DockerEngine::ImageCommitParams.dump_request(params)
+        query_params = [:author, :changes, :comment, :container, :pause, :repo, :tag]
+        @client.request(
+          method: :post,
+          path: "commit",
+          query: parsed.slice(*query_params),
+          body: parsed.except(*query_params),
+          model: DockerEngine::Models::ImageCommitResponse,
+          options: options
+        )
+      end
+
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImageGetParams} for more details.
+      #
+      # Get a tarball containing all images and metadata for a repository.
+      #
+      # If `name` is a specific name and tag (e.g. `ubuntu:latest`), then only that
+      # image (and its parents) are returned. If `name` is an image ID, similarly only
+      # that image (and its parents) are returned, but with the exclusion of the
+      # `repositories` file in the tarball, as there were no image names referenced.
+      #
+      # ### Image tarball format
+      #
+      # An image tarball contains
+      # [Content as defined in the OCI Image Layout Specification](https://github.com/opencontainers/image-spec/blob/v1.1.1/image-layout.md#content).
+      #
+      # Additionally, includes the manifest.json file associated with a backwards
+      # compatible docker save format.
+      #
+      # If the tarball defines a repository, the tarball should also include a
+      # `repositories` file at the root that contains a list of repository and tag names
+      # mapped to layer IDs.
+      #
+      # ```json
+      # {
+      #   "hello-world": {
+      #     "latest": "565a9d68a73f6706862bfe8409a7f659776d4d60a8d096eb4a3cbce6999cc2a1"
+      #   }
+      # }
+      # ```
+      #
+      # @overload get(name, platform: nil, request_options: {})
+      #
+      # @param name [String] Image name or ID
+      #
+      # @param platform [Array<String>] JSON encoded OCI platform describing a platform which will be used
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [StringIO]
+      #
+      # @see DockerEngine::Models::ImageGetParams
+      def get(name, params = {})
+        parsed, options = DockerEngine::ImageGetParams.dump_request(params)
+        @client.request(
+          method: :get,
+          path: ["images/%1$s/get", name],
+          query: parsed,
+          headers: {"accept" => "application/x-tar"},
+          model: StringIO,
+          options: options
+        )
+      end
+
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImageGetAllParams} for more details.
+      #
+      # Get a tarball containing all images and metadata for several image repositories.
+      #
+      # For each value of the `names` parameter: if it is a specific name and tag (e.g.
+      # `ubuntu:latest`), then only that image (and its parents) are returned; if it is
+      # an image ID, similarly only that image (and its parents) are returned and there
+      # would be no names referenced in the 'repositories' file for this image ID.
+      #
+      # For details on the format, see the [export image endpoint](#operation/ImageGet).
+      #
+      # @overload get_all(names: nil, platform: nil, request_options: {})
+      #
+      # @param names [Array<String>] Image names to filter by
+      #
+      # @param platform [Array<String>] JSON encoded OCI platform(s) which will be used to select the
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [StringIO]
+      #
+      # @see DockerEngine::Models::ImageGetAllParams
+      def get_all(params = {})
+        parsed, options = DockerEngine::ImageGetAllParams.dump_request(params)
+        @client.request(
+          method: :get,
+          path: "images/get",
+          query: parsed,
+          headers: {"accept" => "application/x-tar"},
+          model: StringIO,
+          options: options
+        )
+      end
+
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImageHistoryParams} for more details.
+      #
+      # Return parent layers of an image.
+      #
+      # @overload history(name, platform: nil, request_options: {})
+      #
+      # @param name [String] Image name or ID
+      #
+      # @param platform [String] JSON-encoded OCI platform to select the platform-variant.
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [Array<DockerEngine::Models::HistoryItem>]
+      #
+      # @see DockerEngine::Models::ImageHistoryParams
+      def history(name, params = {})
+        parsed, options = DockerEngine::ImageHistoryParams.dump_request(params)
+        @client.request(
+          method: :get,
+          path: ["images/%1$s/history", name],
+          query: parsed,
+          model: DockerEngine::Internal::Type::ArrayOf[DockerEngine::HistoryItem],
           options: options
         )
       end
@@ -96,6 +460,64 @@ module DockerEngine
         )
       end
 
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImageLoadParams} for more details.
+      #
+      # Load a set of images and tags into a repository.
+      #
+      # For details on the format, see the [export image endpoint](#operation/ImageGet).
+      #
+      # @overload load_(body:, platform: nil, quiet: nil, request_options: {})
+      #
+      # @param body [Pathname, StringIO, IO, String, DockerEngine::FilePart] Body param
+      #
+      # @param platform [Array<String>] Query param: JSON encoded OCI platform(s) which will be used to select the
+      #
+      # @param quiet [Boolean] Query param: Suppress progress details during load.
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [nil]
+      #
+      # @see DockerEngine::Models::ImageLoadParams
+      def load_(params)
+        parsed, options = DockerEngine::ImageLoadParams.dump_request(params)
+        @client.request(
+          method: :post,
+          path: "images/load",
+          query: parsed.except(:body),
+          headers: {"content-type" => "application/x-tar"},
+          body: parsed[:body],
+          model: NilClass,
+          options: options
+        )
+      end
+
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImagePruneParams} for more details.
+      #
+      # Delete unused images
+      #
+      # @overload prune(filters: nil, request_options: {})
+      #
+      # @param filters [String] Filters to process on the prune list, encoded as JSON (a `map[string][]string`).
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [DockerEngine::Models::ImagePruneResponse]
+      #
+      # @see DockerEngine::Models::ImagePruneParams
+      def prune(params = {})
+        parsed, options = DockerEngine::ImagePruneParams.dump_request(params)
+        @client.request(
+          method: :post,
+          path: "images/prune",
+          query: parsed,
+          model: DockerEngine::Models::ImagePruneResponse,
+          options: options
+        )
+      end
+
       # Some parameter documentations has been truncated, see
       # {DockerEngine::Models::ImagePullParams} for more details.
       #
@@ -145,6 +567,104 @@ module DockerEngine
         )
       end
 
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImagePushParams} for more details.
+      #
+      # Push an image to a registry.
+      #
+      # If you wish to push an image on to a private registry, that image must already
+      # have a tag which references the registry. For example,
+      # `registry.example.com/myimage:latest`.
+      #
+      # The push is cancelled if the HTTP connection is closed.
+      #
+      # @overload push(name, x_registry_auth:, platform: nil, tag: nil, request_options: {})
+      #
+      # @param name [String] Path param: Name of the image to push. For example, `registry.example.com/myimag
+      #
+      # @param x_registry_auth [String] Header param: A base64url-encoded auth configuration.
+      #
+      # @param platform [String] Query param: JSON-encoded OCI platform to select the platform-variant to push.
+      #
+      # @param tag [String] Query param: Tag of the image to push. For example, `latest`. If no tag is provi
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [nil]
+      #
+      # @see DockerEngine::Models::ImagePushParams
+      def push(name, params)
+        parsed, options = DockerEngine::ImagePushParams.dump_request(params)
+        query_params = [:platform, :tag]
+        @client.request(
+          method: :post,
+          path: ["images/%1$s/push", name],
+          query: parsed.slice(*query_params),
+          headers: parsed.except(*query_params).transform_keys(x_registry_auth: "x-registry-auth"),
+          model: NilClass,
+          options: options
+        )
+      end
+
+      # Some parameter documentations has been truncated, see
+      # {DockerEngine::Models::ImageSearchParams} for more details.
+      #
+      # Search for an image on Docker Hub.
+      #
+      # @overload search(term:, filters: nil, limit: nil, request_options: {})
+      #
+      # @param term [String] Term to search
+      #
+      # @param filters [String] A JSON encoded value of the filters (a `map[string][]string`) to process on the
+      #
+      # @param limit [Integer] Maximum number of results to return
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [Array<DockerEngine::Models::ImageSearchResponseItem>]
+      #
+      # @see DockerEngine::Models::ImageSearchParams
+      def search(params)
+        parsed, options = DockerEngine::ImageSearchParams.dump_request(params)
+        @client.request(
+          method: :get,
+          path: "images/search",
+          query: parsed,
+          model: DockerEngine::Internal::Type::ArrayOf[DockerEngine::Models::ImageSearchResponseItem],
+          options: options
+        )
+      end
+
+      # Create a tag that refers to a source image.
+      #
+      # This creates an additional reference (tag) to the source image. The tag can
+      # include a different repository name and/or tag. If the repository or tag already
+      # exists, it will be overwritten.
+      #
+      # @overload tag(name, repo: nil, tag: nil, request_options: {})
+      #
+      # @param name [String] Image name or ID to tag.
+      #
+      # @param repo [String] The repository to tag in. For example, `someuser/someimage`.
+      #
+      # @param tag [String] The name of the new tag.
+      #
+      # @param request_options [DockerEngine::RequestOptions, Hash{Symbol=>Object}, nil]
+      #
+      # @return [nil]
+      #
+      # @see DockerEngine::Models::ImageTagParams
+      def tag(name, params = {})
+        parsed, options = DockerEngine::ImageTagParams.dump_request(params)
+        @client.request(
+          method: :post,
+          path: ["images/%1$s/tag", name],
+          query: parsed,
+          model: NilClass,
+          options: options
+        )
+      end
+
       # @api private
       #
       # @param client [DockerEngine::Client]