dirwatch 0.0.7 → 0.0.8

data/vendor/bundle/ruby/2.5.0/gems/ruby-progressbar-1.9.0/lib/ruby-progressbar/outputs/tty.rb

@@ -0,0 +1,32 @@
+require 'ruby-progressbar/output'
+
+class   ProgressBar
+module  Outputs
+class   Tty < Output
+  DEFAULT_FORMAT_STRING = '%t: |%B|'.freeze
+
+  alias refresh_with_format_change with_refresh
+
+  def clear
+    stream.print clear_string
+    stream.print "\r"
+  end
+
+  def bar_update_string
+    bar.to_s
+  end
+
+  def default_format
+    DEFAULT_FORMAT_STRING
+  end
+
+  def resolve_format(other_format)
+    other_format || default_format
+  end
+
+  def eol
+    bar.stopped? ? "\n" : "\r"
+  end
+end
+end
+end

data/vendor/bundle/ruby/2.5.0/gems/ruby-progressbar-1.9.0/lib/ruby-progressbar/progress.rb

@@ -0,0 +1,118 @@
+require 'ruby-progressbar/errors/invalid_progress_error'
+
+class   ProgressBar
+class   Progress
+  DEFAULT_TOTAL              = 100
+  DEFAULT_BEGINNING_POSITION = 0
+  DEFAULT_SMOOTHING          = 0.1
+
+  attr_reader               :total,
+                            :progress
+
+  attr_accessor             :starting_position,
+                            :running_average,
+                            :smoothing
+
+  def initialize(options = {})
+    self.total     = options.fetch(:total, DEFAULT_TOTAL)
+    self.smoothing = options[:smoothing] || DEFAULT_SMOOTHING
+
+    start :at => DEFAULT_BEGINNING_POSITION
+  end
+
+  def start(options = {})
+    self.running_average   = 0
+    self.progress          = \
+      self.starting_position = options[:at] || progress
+  end
+
+  def finish
+    self.progress = total unless unknown?
+  end
+
+  def finished?
+    @progress == @total
+  end
+
+  def increment
+    if progress == total
+      warn "WARNING: Your progress bar is currently at #{progress} out of #{total} " \
+           "and cannot be incremented. In v2.0.0 this will become a " \
+           "ProgressBar::InvalidProgressError."
+    end
+
+    self.progress += 1 unless progress == total
+  end
+
+  def decrement
+    if progress == 0
+      warn "WARNING: Your progress bar is currently at #{progress} out of #{total} " \
+           "and cannot be decremented. In v2.0.0 this will become a " \
+           "ProgressBar::InvalidProgressError."
+    end
+
+    self.progress -= 1 unless progress == 0
+  end
+
+  def reset
+    start :at => starting_position
+  end
+
+  def progress=(new_progress)
+    if total && new_progress > total
+      fail ProgressBar::InvalidProgressError,
+           "You can't set the item's current value to be greater than the total."
+    end
+
+    @progress = new_progress
+
+    self.running_average = Calculators::RunningAverage.calculate(running_average,
+                                                                 absolute,
+                                                                 smoothing)
+  end
+
+  def total=(new_total)
+    unless progress.nil? || new_total.nil? || new_total >= progress
+      fail ProgressBar::InvalidProgressError,
+           "You can't set the item's total value to less than the current progress."
+    end
+
+    @total = new_total
+  end
+
+  def percentage_completed
+    return 0   if total.nil?
+    return 100 if total == 0
+
+    # progress / total * 100
+    #
+    # Doing this way so we can avoid converting each
+    # number to a float and then back to an integer.
+    #
+    (progress * 100 / total).to_i
+  end
+
+  def none?
+    running_average.zero? || progress.zero?
+  end
+
+  def unknown?
+    progress.nil? || total.nil?
+  end
+
+  def total_with_unknown_indicator
+    total || '??'
+  end
+
+  def percentage_completed_with_precision
+    return 100.0  if total == 0
+    return 0.0    if total.nil?
+
+    '%5.2f' % [(progress * 100 / total.to_f * 100).floor / 100.0]
+  end
+
+  def absolute
+    progress - starting_position
+  end
+end
+end

data/vendor/bundle/ruby/2.5.0/gems/ruby-progressbar-1.9.0/lib/ruby-progressbar/refinements.rb

@@ -0,0 +1 @@
+require 'ruby-progressbar/refinements/enumerator'

data/vendor/bundle/ruby/2.5.0/gems/ruby-progressbar-1.9.0/lib/ruby-progressbar/refinements/enumerator.rb

@@ -0,0 +1,25 @@
+class  ProgressBar
+module Refinements
+module Enumerator
+refine ::Enumerator do
+  # rubocop:disable Metrics/BlockNesting
+  def with_progressbar(options = {}, &block)
+    chain = ::Enumerator.new do |yielder|
+      progress_bar = ProgressBar.create(options.merge(:starting_at => 0, :total => size))
+
+      each do |*args|
+        yielder.yield(*args).tap do
+          progress_bar.increment
+        end
+      end
+    end
+
+    return chain unless block_given?
+
+    chain.each(&block)
+  end
+  # rubocop:enable Metrics/BlockNesting
+end
+end
+end
+end

data/vendor/bundle/ruby/2.5.0/gems/ruby-progressbar-1.9.0/lib/ruby-progressbar/throttle.rb

@@ -0,0 +1,25 @@
+class   ProgressBar
+class   Throttle
+  attr_accessor :rate,
+                :started_at,
+                :stopped_at,
+                :timer
+
+  def initialize(options = {})
+    self.rate       = options[:throttle_rate] || 0.01
+    self.started_at = nil
+    self.stopped_at = nil
+    self.timer      = options.fetch(:throttle_timer, Timer.new)
+  end
+
+  def choke(options = {})
+    return unless !timer.started?                        ||
+                  options.fetch(:force_update_if, false) ||
+                  timer.elapsed_seconds >= rate
+
+    timer.restart
+
+    yield
+  end
+end
+end

data/vendor/bundle/ruby/2.5.0/gems/ruby-progressbar-1.9.0/lib/ruby-progressbar/time.rb

@@ -0,0 +1,30 @@
+class   ProgressBar
+class   Time
+  TIME_MOCKING_LIBRARY_METHODS = [
+                                   :__simple_stub__now,          # ActiveSupport
+                                   :now_without_mock_time,       # Timecop
+                                   :now_without_delorean,        # Delorean
+                                   :now                          # Actual
+                                 ].freeze
+
+  def initialize(time = ::Time)
+    self.time = time
+  end
+
+  def now
+    time.__send__ unmocked_time_method
+  end
+
+  def unmocked_time_method
+    @unmocked_time_method ||= begin
+                                TIME_MOCKING_LIBRARY_METHODS.find do |method|
+                                  time.respond_to? method
+                                end
+                              end
+  end
+
+  protected
+
+  attr_accessor :time
+end
+end

data/vendor/bundle/ruby/2.5.0/gems/ruby-progressbar-1.9.0/lib/ruby-progressbar/timer.rb

@@ -0,0 +1,72 @@
+require 'ruby-progressbar/time'
+
+class   ProgressBar
+class   Timer
+  attr_accessor :started_at,
+                :stopped_at
+
+  def initialize(options = {})
+    self.time = options[:time] || Time.new
+  end
+
+  def start
+    self.started_at = stopped? ? time.now - (stopped_at - started_at) : time.now
+    self.stopped_at = nil
+  end
+
+  def stop
+    return unless started?
+
+    self.stopped_at = time.now
+  end
+
+  def pause
+    stop
+  end
+
+  def resume
+    start
+  end
+
+  def started?
+    started_at
+  end
+
+  def stopped?
+    stopped_at
+  end
+
+  def reset
+    self.started_at = nil
+    self.stopped_at = nil
+  end
+
+  def reset?
+    !started_at
+  end
+
+  def restart
+    reset
+    start
+  end
+
+  def elapsed_seconds
+    ((stopped_at || time.now) - started_at)
+  end
+
+  def elapsed_whole_seconds
+    elapsed_seconds.floor
+  end
+
+  def divide_seconds(seconds)
+    hours, seconds   = seconds.divmod(3600)
+    minutes, seconds = seconds.divmod(60)
+
+    [hours, minutes, seconds]
+  end
+
+  protected
+
+  attr_accessor :time
+end
+end

data/vendor/bundle/ruby/2.5.0/gems/ruby-progressbar-1.9.0/lib/ruby-progressbar/version.rb

@@ -0,0 +1,3 @@
+class ProgressBar
+  VERSION = '1.9.0'.freeze
+end

data/vendor/bundle/ruby/2.5.0/gems/simplecov-0.13.0/CHANGELOG.md

@@ -0,0 +1,411 @@
+0.13.0 2016-01-25 ([changes](https://github.com/colszowka/simplecov/compare/v0.12.0...v0.13.0))
+==========
+
+## Enhancements
+
+* Faster run times when a very large number of files is loaded into SimpleCov. See [#520](https://github.com/colszowka/simplecov/pull/520) (thanks @alyssais)
+* Only read in source code files that are actually used (faster when files are ignored etc.). See [#540](https://github.com/colszowka/simplecov/pull/540) (tahks @yui-knk)
+
+## Bugfixes
+
+* Fix merging of resultsets if a file is missing on one side. See [#513](https://github.com/colszowka/simplecov/pull/513) (thanks @hanazuki)
+* Fix Ruby 2.4 deprecation warnings by using Integer instead of Fixnum. See [#523](https://github.com/colszowka/simplecov/pull/523) (thanks @nobu)
+* Force Ruby 2 to json 2. See [dc7417d50](https://github.com/colszowka/simplecov/commit/dc7417d5049b1809cea214314c15dd93a5dd964f) (thanks @amatsuda)
+* Various other gem dependency fixes for different gems on different ruby versions. (thanks @amatsuda)
+
+0.12.0 2016-07-02 ([changes](https://github.com/colszowka/simplecov/compare/v0.11.2...v0.12.0))
+=================
+
+## Enhancements
+
+* Add support for JSON versions 2.x
+
+## Bugfixes
+
+* Fix coverage rate of the parallel_tests. See [#441](https://github.com/colszowka/simplecov/pull/441) (thanks @sinsoku)
+* Fix a regression on old rubies that failed to work with the recently introduced frozen VERSION string. See [#461](https://github.com/colszowka/simplecov/pull/461) (thanks @leafle)
+
+0.11.2 2016-02-03 ([changes](https://github.com/colszowka/simplecov/compare/v0.11.1...v0.11.2))
+=================
+
+## Enhancements
+
+* Do not globally pollute Array and Hash with `merge_resultset` utility methods. See [#449](https://github.com/colszowka/simplecov/pull/449) (thanks @amatsuda)
+* Do not `mkdir_p` the `coverage_path` on every access of the method (See [#453](https://github.com/colszowka/simplecov/pull/453) (thanks @paddor)
+* Fixes a Ruby warning related to the `track_files` configuration. See [#447](https://github.com/colszowka/simplecov/pull/447) (thanks @craiglittle)
+* Add a group for background jobs to default Rails profile. See [#442](https://github.com/colszowka/simplecov/pull/442) (thanks @stve)
+
+## Bugfixes
+
+* Fix root_filter evaluates SimpleCov.root before initialization. See [#437](https://github.com/colszowka/simplecov/pull/437) (thanks @tmtm)
+
+0.11.1 2015-12-01 ([changes](https://github.com/colszowka/simplecov/compare/v0.11.0...v0.11.1))
+=================
+
+## Enhancements
+
+## Bugfixes
+
+* Fixed regression in `MultiFormatter.[]` with multiple arguments. See [#431](https://github.com/colszowka/simplecov/pull/431) (thanks @dillondrobena)
+
+0.11.0 2015-11-29 ([changes](https://github.com/colszowka/simplecov/compare/v0.10.0...v0.11.0))
+=================
+
+## Enhancements
+
+* Added `SimpleCov.minimum_coverage_by_file` for per-file coverage thresholds. See [#392](https://github.com/colszowka/simplecov/pull/392) (thanks @ptashman)
+* Added `track_files` configuration option to specify a glob to always include in coverage results, whether or not those files are required. By default, this is enabled in the Rails profile for common Rails directories. See [#422](https://github.com/colszowka/simplecov/pull/422) (thanks @hugopeixoto)
+* Speed up `root_filter` by an order of magnitude. See [#396](https://github.com/colszowka/simplecov/pull/396) (thanks @raszi)
+
+## Bugfixes
+
+* Fix warning about global variable `$ERROR_INFO`. See [#400](https://github.com/colszowka/simplecov/pull/400) (thanks @amatsuda)
+* Actually recurse upward looking for `.simplecov`, as claimed by the documentation, rather than only the working directory. See [#423](https://github.com/colszowka/simplecov/pull/423) (thanks @alexdowad)
+
+0.10.0 2015-04-18 ([changes](https://github.com/colszowka/simplecov/compare/v0.9.2...v0.10.0))
+=================
+
+## Enhancements
+
+ * Add writeup about using with Spring to README. See [#341](https://github.com/colszowka/simplecov/issues/341) (thanks @swrobel and @onebree)
+ * Add support to pass in an Array when creating filter groups (original PR #104)
+ * Filter `/vendor/bundle` by default. See [#331](https://github.com/colszowka/simplecov/pull/331) (thanks @andyw8)
+ * Add some helpful singleton methods to the version string.
+ * Allow array to be passed in a filter. See [375](https://github.com/colszowka/simplecov/pull/375) (thanks @JanStevens)
+ * Enforce consistent code formatting with RuboCop.
+
+## Bugfixes
+
+ * Fix order dependencies in unit tests. See [#376](https://github.com/colszowka/simplecov/pull/376) (thanks @hugopeixoto)
+ * Only run the at_exit behaviors if the current PID matches the PID that called SimpleCov.start. See [#377](https://github.com/colszowka/simplecov/pull/377) (thanks @coderanger)
+
+0.9.2, 2015-02-18 ([changes](https://github.com/colszowka/simplecov/compare/v0.9.1...v0.9.2))
+=================
+
+This is a minor bugfix release for simplecov-html, released as `0.9.0`. Due to the tight version constraint in the gemspec
+a new release of simplecov had to be shipped to allow using simplecov-html `~> 0.9.0`.
+
+  * The browser back / forward button should now work again. See [#36](https://github.com/colszowka/simplecov-html/pull/36) and
+    [#35](https://github.com/colszowka/simplecov-html/pull/35). Thanks @whatasunnyday and @justinsteele for submitting PRs to fix this.
+  * Fix "warning: possibly useless use of a variable in void context" See [#31](https://github.com/colszowka/simplecov-html/pull/31). Thanks @cbandy
+  * Always use binary file format. See [#32](https://github.com/colszowka/simplecov-html/pull/32). Thanks @andy128k
+  * Avoid slow file output with JRuby/Windows. See [#16](https://github.com/colszowka/simplecov-html/pull/16). Thanks @pschambacher
+
+Other than the release includes a bunch of mostly documentation improvements:
+
+  * Update Rails path for Rails 4+. See [#336](https://github.com/colszowka/simplecov/pull/336). Thanks @yazinsai
+  * Encourage use of .simplecov to avoid lost files. See [#338](https://github.com/colszowka/simplecov/pull/338). thanks @dankohn
+  * Specified in the gemspec that simplecov needs ruby 1.8.7. See [#343](https://github.com/colszowka/simplecov/pull/343). thanks @iainbeeston
+  * Fix mispointed link in CHANGELOG.md. See [#353](https://github.com/colszowka/simplecov/pull/353). Thanks @dleve123
+  * Improve command name docs. See [#356](https://github.com/colszowka/simplecov/pull/356). Thanks @gtd
+
+
+
+0.9.1, 2014-09-21 ([changes](https://github.com/colszowka/simplecov/compare/v0.9.0...v0.9.1))
+=================
+
+## Bugfixes
+
+ * In 0.9.0, we introduced a regression that made SimpleCov no-op mode fail on Ruby 1.8, while
+   dropping 1.8 support altogether is announced only for v1.0. This has been fixed.
+   See [#333](https://github.com/colszowka/simplecov/issues/333) (thanks (@sferik)
+
+
+0.9.0, 2014-07-17 ([changes](https://github.com/colszowka/simplecov/compare/v0.8.2...v0.9.0))
+=================
+
+**A warm welcome and big thank you to the new contributors [@xaviershay](https://github.com/xaviershay), [@sferik](https://github.com/sferik) and especially [@bf4](https://github.com/bf4) for tackling a whole lot of issues and pull requests for this release!**
+
+## Enhancements
+
+  * New interface to specify multiple formatters.
+    See [#317](https://github.com/colszowka/simplecov/pull/317) (thanks @sferik)
+  * Document in the README how to exclude code from coverage reports,
+    and that the feature shouldn't be abused for skipping untested
+    private code.
+    See [#304](https://github.com/colszowka/simplecov/issues/304)
+  * Clarify Ruby version support.
+    See [#279](https://github.com/colszowka/simplecov/pull/279) (thanks @deivid-rodriguez)
+
+## Bugfixes
+
+  * Ensure calculations return Floats, not Fixnum or Rational. Fixes segfaults with mathn.
+    See [#245](https://github.com/colszowka/simplecov/pull/245) (thanks to @bf4)
+  * Using `Kernel.exit` instead of exit to avoid uncaught throw :IRB_EXIT when
+    exiting irb sessions.
+    See [#287](https://github.com/colszowka/simplecov/pull/287) (thanks @wless1)
+    See [#285](https://github.com/colszowka/simplecov/issues/285)
+  * Does not look for .simplecov in ~/ when $HOME is not set.
+    See [#311](https://github.com/colszowka/simplecov/pull/311) (thanks @lasseebert)
+  * Exit with code only if it's Numeric > 0.
+    See [#302](https://github.com/colszowka/simplecov/pull/302) (thanks @hajder)
+  * Make default filter case insensitive.
+    See [#280](https://github.com/colszowka/simplecov/pull/280) (thanks @ryanatball)
+  * Improve regexp that matches functional tests.
+    See [#276](https://github.com/colszowka/simplecov/pull/276) (thanks @sferik)
+  * Fix TravisCI [#272](https://github.com/colszowka/simplecov/pull/272) [#278](https://github.com/colszowka/simplecov/pull/278), [#302](https://github.com/colszowka/simplecov/pull/302)
+  * Fix global config load.
+    See [#311](https://github.com/colszowka/simplecov/pull/311) (thanks @lasseebert)
+
+v0.8.2, 2013-11-20 ([changes](https://github.com/colszowka/simplecov/compare/v0.8.1...v0.8.2))
+==================
+
+## Bugfixes
+
+  * Replaced the locking behaviour [via lockfile gem](https://github.com/colszowka/simplecov/pull/185) with
+    plain Ruby explicit file locking when merging results. This should make simplecov merging to behave well
+    on Windows again.
+    See [#258](https://github.com/colszowka/simplecov/issues/258) and
+    [#223](https://github.com/colszowka/simplecov/pull/223) (thanks to @tomykaira)
+
+v0.8.1, 2013-11-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.8.0...v0.8.1))
+==================
+
+## Bugfixes
+
+  * Fixed a regression introduced in 0.8.0 - the Forwardable STDLIB module is now required explicitly.
+    See [#256](https://github.com/colszowka/simplecov/pull/256) (thanks to @kylev)
+
+v0.8.0, 2013-11-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.7.1...v0.8.0))
+==================
+
+**Note: Yanked the same day because of the regression that 0.8.1 fixes, see above**
+
+## TL;DR
+
+It's been way too long since the last official release 0.7.1, but this was partly due to it proving itself
+quite stable in most circumstances. This release brings various further stability improvements to result set merging
+(especially when working with parallel_tests), the configuration, source file encodings, and command name guessing.
+
+The 0.8 line is the last one to cooperate with Ruby < 1.9. Starting with 0.9, SimpleCov will assume to be running in
+Ruby 1.9+, and will not try to detect or bail silently on older Ruby versions. An appropriate deprecation warning
+has been added.
+
+## Features
+
+  * Configuration blocks now have access to variables and methods outside of the block's scope.
+    See [#238](https://github.com/colszowka/simplecov/pull/238) (thanks to @ms-tg)
+  * You can now have a global `~/.simplecov` configuration file.
+    See [#195](https://github.com/colszowka/simplecov/pull/195) (thanks to @spagalloco)
+  * simplecov-html now uses the MIT-licensed colorbox plugin. Some adjustments when viewing source files,
+    including retaining the currently open file on refresh have been added.
+    See [simplecov-html #15](https://github.com/colszowka/simplecov-html/pull/15) (thanks to @chetan)
+  * Adds support for Rails 4 command guessing, removes default group `vendor/plugins`.
+    See [#181](https://github.com/colszowka/simplecov/pull/181) and
+    [#203](https://github.com/colszowka/simplecov/pull/203) (thanks to @semanticart and @phallstrom)
+  * You can now load simplecov without the default settings by doing `require 'simplecov/no_defaults'`
+    or setting `ENV['SIMPLECOV_NO_DEFAULTS']`. Check `simplecov/defaults` to see what preconfigurations are getting
+    dropped by using this. See [#209](https://github.com/colszowka/simplecov/pull/209) (thanks to @ileitch)
+  * The result set merging now uses the `lockfile` gem to avoid race conditions.
+    See [#185](https://github.com/colszowka/simplecov/pull/185) (thanks to @jshraibman-mdsol).
+  * Automatically detect the usage of parallel_tests and adjust the command name with the test env number accordingly,
+    See [#64](https://github.com/colszowka/simplecov/issues/64) and
+    [#185](https://github.com/colszowka/simplecov/pull/185) (thanks to @jshraibman-mdsol).
+
+## Enhancements
+
+  * Rename adapters to "profiles" given that they are bundles of settings. The old adapter methods are
+    deprecated, but remain available for now.
+    See [#207](https://github.com/colszowka/simplecov/pull/207) (thanks to @mikerobe)
+  * Tweaks to the automatic test suite naming. In particular, `rspec/features` should now
+    be correctly attributed to RSpec, not Cucumber.
+    See [#212](https://github.com/colszowka/simplecov/pull/212) (thanks to @ersatzryan and @betelgeuse)
+  * MiniTest should now be identified correctly by the command name guesser.
+    See [#244](https://github.com/colszowka/simplecov/pull/244) (thanks to @envygeeks)
+  * Makes SimpleCov resilient to inclusion of mathn library.
+    See [#175](https://github.com/colszowka/simplecov/pull/175) and
+    [#140](https://github.com/colszowka/simplecov/issues/140) (thanks to @scotje)
+  * Allow coverage_dir to be an absolute path.
+  * See [#190](https://github.com/colszowka/simplecov/pull/190) (thanks to @jshraibman-mdsol)
+  * The internal cucumber test suite now uses Capybara 2.
+    See [#206](https://github.com/colszowka/simplecov/pull/206) (thanks to @infertux)
+  * Work-arounds for the Coverage library shipped in JRuby 1.6 to behave in line with MRI.
+    See [#174](https://github.com/colszowka/simplecov/pull/174) (thanks to @grddev)
+  * Fix warning: instance variable @exit_status not initialized.
+    See [#242](https://github.com/colszowka/simplecov/pull/242) and
+    [#213](https://github.com/colszowka/simplecov/pull/213) (thanks to @sferik and @infertux)
+
+## Bugfixes
+
+  * Correct result calculations for people using :nocov: tags.
+    See [#215](https://github.com/colszowka/simplecov/pull/215) (thanks to @aokolish)
+  * Average hits per line for groups of files is now computed correctly.
+    See [#192](http://github.com/colszowka/simplecov/pull/192) and
+    [#179](http://github.com/colszowka/simplecov/issues/179) (thanks to @graysonwright)
+  * Compatability with BINARY internal encoding.
+    See [#194](https://github.com/colszowka/simplecov/pull/194) and
+    [#127](https://github.com/colszowka/simplecov/issues/127) (thanks to @justfalter)
+  * Special characters in `SimpleCov.root` are now correctly escaped before being used as a RegExp.
+    See [#204](https://github.com/colszowka/simplecov/issues/204) and
+    [#237](https://github.com/colszowka/simplecov/pull/237) (thanks to @rli9)
+
+v0.7.1, 2012-10-12 ([changes](https://github.com/colszowka/simplecov/compare/v0.7.0...v0.7.1))
+==================
+
+  * [BUGFIX] The gem packages of 0.7.0 (both simplecov and simplecov-html) pushed to Rubygems had some file
+    permission issues, leading to problems when installing SimpleCov in a root/system Rubygems install and then
+    trying to use it as a normal user (see https://github.com/colszowka/simplecov/issues/171, thanks @envygeeks
+    for bringing it up). The gem build process has been changed to always enforce proper permissions before packaging
+    to avoid this issue in the future.
+
+
+v0.7.0, 2012-10-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.4...v0.7.0))
+==================
+
+  * [FEATURE] The new `maximum_coverage_drop` and `minimum_coverage` now allow you to fail your build when the
+    coverage dropped by more than what you allowed or is below a minimum value required. Also, `refuse_coverage_drop` disallows
+    any coverage drops between test runs.
+    See https://github.com/colszowka/simplecov/pull/151, https://github.com/colszowka/simplecov/issues/11,
+    https://github.com/colszowka/simplecov/issues/90, and https://github.com/colszowka/simplecov/issues/96 (thanks to @infertux)
+  * [FEATURE] SimpleCov now ships with a built-in MultiFormatter which allows the easy usage of multiple result formatters at
+    the same time without the need to write custom wrapper code.
+    See https://github.com/colszowka/simplecov/pull/158 (thanks to @nikitug)
+  * [BUGFIX] The usage of digits, hyphens and underscores in group names could lead to broken tab navigation
+    in the default simplecov-html reports. See https://github.com/colszowka/simplecov-html/pull/14 (thanks to @ebelgarts)
+  * [REFACTORING] A few more ruby warnings removed. See https://github.com/colszowka/simplecov/issues/106 and
+    https://github.com/colszowka/simplecov/pull/139. (thanks to @lukejahnke)
+  * A [Pledgie button](https://github.com/colszowka/simplecov/commit/63cfa99f8658fa5cc66a38c83b3195fdf71b9e93) for those that
+    feel generous :)
+  * The usual bunch of README fixes and documentation tweaks. Thanks to everyone who contributed those!
+
+v0.6.4, 2012-05-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.3...v0.6.4))
+==================
+
+  * [BUGFIX] Encoding issues with ISO-8859-encoded source files fixed.
+    See https://github.com/colszowka/simplecov/pull/117. (thanks to @Deradon)
+  * [BUGFIX] Ensure ZeroDivisionErrors won't occur when calculating the coverage result, which previously
+    could happen in certain cases. See https://github.com/colszowka/simplecov/pull/128. (thanks to @japgolly)
+  * [REFACTORING] Changed a couple instance variable lookups so SimpleCov does not cause a lot of warnings when
+    running ruby at a higher warning level. See https://github.com/colszowka/simplecov/issues/106 and
+    https://github.com/colszowka/simplecov/pull/119. (thanks to @mvz and @gioele)
+
+
+v0.6.3, 2012-05-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.2...v0.6.3))
+==================
+
+  * [BUGFIX] Modified the API-changes for newer multi_json versions introduced with #122 and v0.6.2 so
+    they are backwards-compatible with older multi_json gems in order to avoid simplecov polluting
+    the multi_json minimum version requirement for entire applications.
+    See https://github.com/colszowka/simplecov/issues/132
+  * Added appraisal gem to the test setup in order to run the test suite against both 1.0 and 1.3
+    multi_json gems and ensure the above actually works :)
+
+v0.6.2, 2012-04-20 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.1...v0.6.2))
+==================
+
+  * [Updated to latest version of MultiJSON and its new API (thanks to @sferik and @ronen).
+    See https://github.com/colszowka/simplecov/pull/122
+
+v0.6.1, 2012-02-24 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.0...v0.6.1))
+==================
+
+  * [BUGFIX] Don't force-load Railtie on Rails < 3. Fixes regression introduced with
+    #83. See https://github.com/colszowka/simplecov/issues/113
+
+v0.6.0, 2012-02-22 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.4...v0.6.0))
+==================
+
+  * [FEATURE] Auto-magic `rake simplecov` task for rails
+    (see https://github.com/colszowka/simplecov/pull/83, thanks @sunaku)
+  * [BUGFIX] Treat source files as UTF-8 to avoid encoding errors
+    (see https://github.com/colszowka/simplecov/pull/103, thanks @joeyates)
+  * [BUGFIX] Store the invoking terminal command right after loading so they are safe from
+    other libraries tampering with ARGV. Among other makes automatic Rails test suite splitting
+    (Unit/Functional/Integration) work with recent rake versions again
+    (see https://github.com/colszowka/simplecov/issues/110)
+  * [FEATURE] If guessing command name from the terminal command fails, try guessing from defined constants
+    (see https://github.com/colszowka/simplecov/commit/37afca54ef503c33d888e910f950b3b943cb9a6c)
+  * Some refactorings and cleanups as usual. Please refer to the github compare view for a full
+    list of changes: https://github.com/colszowka/simplecov/compare/v0.5.4...v0.6.0
+
+v0.5.4, 2011-10-12 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.3...v0.5.4))
+==================
+
+  * Do not give exit code 0 when there are exceptions prior to tests
+    (see https://github.com/colszowka/simplecov/issues/41, thanks @nbogie)
+  * The API for building custom filter classes is now more obvious, using #matches? instead of #passes? too.
+    (see https://github.com/colszowka/simplecov/issues/85, thanks @robinroestenburg)
+  * Mailers are now part of the Rails adapter as their own group (see
+    https://github.com/colszowka/simplecov/issues/79, thanks @geetarista)
+  * Removed fix for JRuby 1.6 RC1 float bug because it's been fixed
+    (see https://github.com/colszowka/simplecov/issues/86)
+  * Readme formatted in Markdown :)
+
+v0.5.3, 2011-09-13 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.2...v0.5.3))
+==================
+
+  * Fix for encoding issues that came from the nocov processing mechanism
+    (see https://github.com/colszowka/simplecov/issues/71)
+  * :nocov: lines are now actually being reflected in the HTML report and are marked in yellow.
+
+  * The Favicon in the HTML report is now determined by the overall coverage and will have the color
+    that the coverage percentage gets as a css class to immediately indicate coverage status on first sight.
+
+  * Introduced SimpleCov::SourceFile::Line#status method that returns the coverage status
+    as a string for this line - made SimpleCov::HTML use that.
+  * Refactored nocov processing and made it configurable using SimpleCov.ncov_token (or it's
+    alias SimpleCov.skip_token)
+
+v0.5.2, 2011-09-12 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.1...v0.5.2))
+==================
+
+  * Another fix for a bug in JSON processing introduced with MultiJSON in 0.5.1
+    (see https://github.com/colszowka/simplecov/pull/75, thanks @sferik)
+
+v0.5.1, 2011-09-12 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.0...v0.5.1))
+==================
+**Note: Yanked 2011-09-12 because the MultiJSON-patch had a crucial bug**
+
+  * Fix for invalid gemspec dependency string (see https://github.com/colszowka/simplecov/pull/70,
+    http://blog.rubygems.org/2011/08/31/shaving-the-yaml-yacc.html, thanks @jspradlin)
+
+  * Added JSON in the form of the multi_json gem as dependency for those cases when built-in JSON
+    is unavailable (see https://github.com/colszowka/simplecov/issues/72
+    and https://github.com/colszowka/simplecov/pull/74, thanks @sferik)
+
+v0.5.0, 2011-09-09 ([changes](https://github.com/colszowka/simplecov/compare/v0.4.2...v0.5.4))
+==================
+**Note: Yanked 2011-09-09 because of trouble with the gemspec.**
+
+  * JSON is now used instead of YAML for resultset caching (used for merging). Should resolve
+    a lot of problems people used to have because of YAML parser errors.
+
+  * There's a new adapter 'test_frameworks'. Use it outside of Rails to remove `test/`,
+    `spec/`, `features/` and `autotest/` dirs from your coverage reports, either directly
+    with `SimpleCov.start 'test_frameworks'` or with `SimpleCov.load_adapter 'test_frameworks'`
+
+  * SimpleCov configuration can now be placed centrally in a text file `.simplecov`, which will
+    be automatically read on `require 'simplecov'`. This makes using custom configuration like
+    groups and filters across your test suites much easier as you only have to specify your config
+    once. Just put the whole `SimpleCov.start (...)` code into `APP_ROOT/.simplecov`
+
+  * Lines can now be skipped by using the :nocov: flag in comments that wrap the code that should be
+    skipped, like in this example (thanks @phillipkoebbe)
+
+    <pre>
+      #:nocov:
+      def skipped
+        @foo * 2
+      end
+      #:nocov:
+    </pre>
+
+  * Moved file set coverage analytics from simplecov-html to SimpleCov::FileList, a new subclass
+    of Array that is always returned for SourceFile lists (i.e. in groups) and can now be used
+    in all formatters without the need to roll your own.
+
+  * The exceptions you used to get after removing some code and re-running your tests because SimpleCov
+    couldn't find the cached source lines should be resolved (thanks @goneflyin)
+
+  * Coverage strength metric: Average hits/line per source file and result group (thanks @trans)
+
+  * Finally, SimpleCov has an extensive Cucumber test suite
+
+  * Full compatibility with Ruby 1.9.3.preview1
+
+### HTML Formatter:
+
+  * The display of source files has been improved a lot. Weird scrolling trouble, out-of-scope line hit counts
+    and such should be a thing of the past. Also, it is prettier now.
+  * Source files are now syntax highlighted
+  * File paths no longer have that annoying './' in front of them