dirwatch 0.0.1 → 0.0.2

data/vendor/bundle/ruby/2.3.0/gems/rubocop-0.46.0/config/enabled.yml

@@ -0,0 +1,1588 @@
+# These are all the cops that are enabled in the default configuration.
+
+Style/AccessModifierIndentation:
+  Description: Check indentation of private/protected visibility modifiers.
+  StyleGuide: '#indent-public-private-protected'
+  Enabled: true
+
+Style/AccessorMethodName:
+  Description: Check the naming of accessor methods for get_/set_.
+  StyleGuide: '#accessor_mutator_method_names'
+  Enabled: true
+
+Style/Alias:
+  Description: 'Use alias instead of alias_method.'
+  StyleGuide: '#alias-method'
+  Enabled: true
+
+Style/AlignArray:
+  Description: >-
+                 Align the elements of an array literal if they span more than
+                 one line.
+  StyleGuide: '#align-multiline-arrays'
+  Enabled: true
+
+Style/AlignHash:
+  Description: >-
+                 Align the elements of a hash literal if they span more than
+                 one line.
+  Enabled: true
+
+Style/AlignParameters:
+  Description: >-
+                 Align the parameters of a method call if they span more
+                 than one line.
+  StyleGuide: '#no-double-indent'
+  Enabled: true
+
+Style/AndOr:
+  Description: 'Use &&/|| instead of and/or.'
+  StyleGuide: '#no-and-or-or'
+  Enabled: true
+
+Style/ArrayJoin:
+  Description: 'Use Array#join instead of Array#*.'
+  StyleGuide: '#array-join'
+  Enabled: true
+
+Style/AsciiComments:
+  Description: 'Use only ascii symbols in comments.'
+  StyleGuide: '#english-comments'
+  Enabled: true
+
+Style/AsciiIdentifiers:
+  Description: 'Use only ascii symbols in identifiers.'
+  StyleGuide: '#english-identifiers'
+  Enabled: true
+
+Style/Attr:
+  Description: 'Checks for uses of Module#attr.'
+  StyleGuide: '#attr'
+  Enabled: true
+
+Style/BeginBlock:
+  Description: 'Avoid the use of BEGIN blocks.'
+  StyleGuide: '#no-BEGIN-blocks'
+  Enabled: true
+
+Style/BarePercentLiterals:
+  Description: 'Checks if usage of %() or %Q() matches configuration.'
+  StyleGuide: '#percent-q-shorthand'
+  Enabled: true
+
+Style/BlockComments:
+  Description: 'Do not use block comments.'
+  StyleGuide: '#no-block-comments'
+  Enabled: true
+
+Style/BlockEndNewline:
+  Description: 'Put end statement of multiline block on its own line.'
+  Enabled: true
+
+Style/BlockDelimiters:
+  Description: >-
+                Avoid using {...} for multi-line blocks (multiline chaining is
+                always ugly).
+                Prefer {...} over do...end for single-line blocks.
+  StyleGuide: '#single-line-blocks'
+  Enabled: true
+
+Style/BracesAroundHashParameters:
+  Description: 'Enforce braces style around hash parameters.'
+  Enabled: true
+
+Style/CaseEquality:
+  Description: 'Avoid explicit use of the case equality operator(===).'
+  StyleGuide: '#no-case-equality'
+  Enabled: true
+
+Style/CaseIndentation:
+  Description: 'Indentation of when in a case/when/[else/]end.'
+  StyleGuide: '#indent-when-to-case'
+  Enabled: true
+
+Style/CharacterLiteral:
+  Description: 'Checks for uses of character literals.'
+  StyleGuide: '#no-character-literals'
+  Enabled: true
+
+Style/ClassAndModuleCamelCase:
+  Description: 'Use CamelCase for classes and modules.'
+  StyleGuide: '#camelcase-classes'
+  Enabled: true
+
+Style/ClassAndModuleChildren:
+  Description: 'Checks style of children classes and modules.'
+  Enabled: true
+
+Style/ClassCheck:
+  Description: 'Enforces consistent use of `Object#is_a?` or `Object#kind_of?`.'
+  Enabled: true
+
+Style/ClassMethods:
+  Description: 'Use self when defining module/class methods.'
+  StyleGuide: '#def-self-class-methods'
+  Enabled: true
+
+Style/ClassVars:
+  Description: 'Avoid the use of class variables.'
+  StyleGuide: '#no-class-vars'
+  Enabled: true
+
+Style/ClosingParenthesisIndentation:
+  Description: 'Checks the indentation of hanging closing parentheses.'
+  Enabled: true
+
+Style/ColonMethodCall:
+  Description: 'Do not use :: for method call.'
+  StyleGuide: '#double-colons'
+  Enabled: true
+
+Style/CommandLiteral:
+  Description: 'Use `` or %x around command literals.'
+  StyleGuide: '#percent-x'
+  Enabled: true
+
+Style/CommentAnnotation:
+  Description: >-
+                 Checks formatting of special comments
+                 (TODO, FIXME, OPTIMIZE, HACK, REVIEW).
+  StyleGuide: '#annotate-keywords'
+  Enabled: true
+
+Style/CommentIndentation:
+  Description: 'Indentation of comments.'
+  Enabled: true
+
+Style/ConditionalAssignment:
+  Description: >-
+                 Use the return value of `if` and `case` statements for
+                 assignment to a variable and variable comparison instead
+                 of assigning that variable inside of each branch.
+  Enabled: true
+
+Style/ConstantName:
+  Description: 'Constants should use SCREAMING_SNAKE_CASE.'
+  StyleGuide: '#screaming-snake-case'
+  Enabled: true
+
+Style/DefWithParentheses:
+  Description: 'Use def with parentheses when there are arguments.'
+  StyleGuide: '#method-parens'
+  Enabled: true
+
+Style/Documentation:
+  Description: 'Document classes and non-namespace modules.'
+  Enabled: true
+  Exclude:
+    - 'spec/**/*'
+    - 'test/**/*'
+
+Style/DotPosition:
+  Description: 'Checks the position of the dot in multi-line method calls.'
+  StyleGuide: '#consistent-multi-line-chains'
+  Enabled: true
+
+Style/DoubleNegation:
+  Description: 'Checks for uses of double negation (!!).'
+  StyleGuide: '#no-bang-bang'
+  Enabled: true
+
+Style/EachForSimpleLoop:
+  Description: >-
+                 Use `Integer#times` for a simple loop which iterates a fixed
+                 number of times.
+  Enabled: true
+
+Style/EachWithObject:
+  Description: 'Prefer `each_with_object` over `inject` or `reduce`.'
+  Enabled: true
+
+Style/ElseAlignment:
+  Description: 'Align elses and elsifs correctly.'
+  Enabled: true
+
+Style/EmptyElse:
+  Description: 'Avoid empty else-clauses.'
+  Enabled: true
+
+Style/EmptyCaseCondition:
+  Description: 'Avoid empty condition in case statements.'
+  Enabled: true
+
+Style/EmptyLineBetweenDefs:
+  Description: 'Use empty lines between defs.'
+  StyleGuide: '#empty-lines-between-methods'
+  Enabled: true
+
+Style/EmptyLines:
+  Description: "Don't use several empty lines in a row."
+  Enabled: true
+
+Style/EmptyLinesAroundAccessModifier:
+  Description: "Keep blank lines around access modifiers."
+  Enabled: true
+
+Style/EmptyLinesAroundBlockBody:
+  Description: "Keeps track of empty lines around block bodies."
+  Enabled: true
+
+Style/EmptyLinesAroundClassBody:
+  Description: "Keeps track of empty lines around class bodies."
+  Enabled: true
+
+Style/EmptyLinesAroundModuleBody:
+  Description: "Keeps track of empty lines around module bodies."
+  Enabled: true
+
+Style/EmptyLinesAroundMethodBody:
+  Description: "Keeps track of empty lines around method bodies."
+  Enabled: true
+
+Style/EmptyLiteral:
+  Description: 'Prefer literals to Array.new/Hash.new/String.new.'
+  StyleGuide: '#literal-array-hash'
+  Enabled: true
+
+Style/EmptyMethod:
+  Description: 'Checks the formatting of empty method definitions.'
+  StyleGuide: '#no-single-line-methods'
+  Enabled: true
+
+Style/EndBlock:
+  Description: 'Avoid the use of END blocks.'
+  StyleGuide: '#no-END-blocks'
+  Enabled: true
+
+Style/EndOfLine:
+  Description: 'Use Unix-style line endings.'
+  StyleGuide: '#crlf'
+  Enabled: true
+
+Style/EvenOdd:
+  Description: 'Favor the use of Integer#even? && Integer#odd?'
+  StyleGuide: '#predicate-methods'
+  Enabled: true
+
+Style/ExtraSpacing:
+  Description: 'Do not use unnecessary spacing.'
+  Enabled: true
+
+Style/FileName:
+  Description: 'Use snake_case for source file names.'
+  StyleGuide: '#snake-case-files'
+  Enabled: true
+
+Style/FrozenStringLiteralComment:
+  Description: >-
+                 Add the frozen_string_literal comment to the top of files
+                 to help transition from Ruby 2.3.0 to Ruby 3.0.
+  Enabled: true
+
+Style/InitialIndentation:
+  Description: >-
+    Checks the indentation of the first non-blank non-comment line in a file.
+  Enabled: true
+
+Style/FirstParameterIndentation:
+  Description: 'Checks the indentation of the first parameter in a method call.'
+  Enabled: true
+
+Style/FlipFlop:
+  Description: 'Checks for flip flops'
+  StyleGuide: '#no-flip-flops'
+  Enabled: true
+
+Style/For:
+  Description: 'Checks use of for or each in multiline loops.'
+  StyleGuide: '#no-for-loops'
+  Enabled: true
+
+Style/FormatString:
+  Description: 'Enforce the use of Kernel#sprintf, Kernel#format or String#%.'
+  StyleGuide: '#sprintf'
+  Enabled: true
+
+Style/GlobalVars:
+  Description: 'Do not introduce global variables.'
+  StyleGuide: '#instance-vars'
+  Reference: 'http://www.zenspider.com/Languages/Ruby/QuickRef.html'
+  Enabled: true
+
+Style/GuardClause:
+  Description: 'Check for conditionals that can be replaced with guard clauses'
+  StyleGuide: '#no-nested-conditionals'
+  Enabled: true
+
+Style/HashSyntax:
+  Description: >-
+                 Prefer Ruby 1.9 hash syntax { a: 1, b: 2 } over 1.8 syntax
+                 { :a => 1, :b => 2 }.
+  StyleGuide: '#hash-literals'
+  Enabled: true
+
+Style/IfInsideElse:
+  Description: 'Finds if nodes inside else, which can be converted to elsif.'
+  Enabled: true
+
+Style/IfUnlessModifier:
+  Description: >-
+                 Favor modifier if/unless usage when you have a
+                 single-line body.
+  StyleGuide: '#if-as-a-modifier'
+  Enabled: true
+
+Style/IfUnlessModifierOfIfUnless:
+  Description: >-
+                 Avoid modifier if/unless usage on conditionals.
+  Enabled: true
+
+Style/IfWithSemicolon:
+  Description: 'Do not use if x; .... Use the ternary operator instead.'
+  StyleGuide: '#no-semicolon-ifs'
+  Enabled: true
+
+Style/IndentationConsistency:
+  Description: 'Keep indentation straight.'
+  Enabled: true
+
+Style/IndentationWidth:
+  Description: 'Use 2 spaces for indentation.'
+  StyleGuide: '#spaces-indentation'
+  Enabled: true
+
+Style/IdenticalConditionalBranches:
+  Description: >-
+                 Checks that conditional statements do not have an identical
+                 line at the end of each branch, which can validly be moved
+                 out of the conditional.
+  Enabled: true
+
+Style/IndentArray:
+  Description: >-
+                 Checks the indentation of the first element in an array
+                 literal.
+  Enabled: true
+
+Style/IndentAssignment:
+  Description: >-
+                 Checks the indentation of the first line of the
+                 right-hand-side of a multi-line assignment.
+  Enabled: true
+
+Style/IndentHash:
+  Description: 'Checks the indentation of the first key in a hash literal.'
+  Enabled: true
+
+Style/InfiniteLoop:
+  Description: 'Use Kernel#loop for infinite loops.'
+  StyleGuide: '#infinite-loop'
+  Enabled: true
+
+Style/Lambda:
+  Description: 'Use the new lambda literal syntax for single-line blocks.'
+  StyleGuide: '#lambda-multi-line'
+  Enabled: true
+
+Style/SpaceInLambdaLiteral:
+  Description: 'Checks for spaces in lambda literals.'
+  Enabled: true
+
+Style/LambdaCall:
+  Description: 'Use lambda.call(...) instead of lambda.(...).'
+  StyleGuide: '#proc-call'
+  Enabled: true
+
+Style/LeadingCommentSpace:
+  Description: 'Comments should start with a space.'
+  StyleGuide: '#hash-space'
+  Enabled: true
+
+Style/LineEndConcatenation:
+  Description: >-
+                 Use \ instead of + or << to concatenate two string literals at
+                 line end.
+  Enabled: true
+
+Style/MethodCallParentheses:
+  Description: 'Do not use parentheses for method calls with no arguments.'
+  StyleGuide: '#method-invocation-parens'
+  Enabled: true
+
+Style/MethodDefParentheses:
+  Description: >-
+                 Checks if the method definitions have or don't have
+                 parentheses.
+  StyleGuide: '#method-parens'
+  Enabled: true
+
+Style/MethodName:
+  Description: 'Use the configured style when naming methods.'
+  StyleGuide: '#snake-case-symbols-methods-vars'
+  Enabled: true
+
+Style/MethodMissing:
+  Description: 'Avoid using `method_missing`.'
+  StyleGuide: '#no-method-missing'
+  Enabled: true
+
+Style/ModuleFunction:
+  Description: 'Checks for usage of `extend self` in modules.'
+  StyleGuide: '#module-function'
+  Enabled: true
+
+Style/MultilineArrayBraceLayout:
+  Description: >-
+                 Checks that the closing brace in an array literal is
+                 either on the same line as the last array element, or
+                 a new line.
+  Enabled: true
+
+Style/MultilineBlockChain:
+  Description: 'Avoid multi-line chains of blocks.'
+  StyleGuide: '#single-line-blocks'
+  Enabled: true
+
+Style/MultilineBlockLayout:
+  Description: 'Ensures newlines after multiline block do statements.'
+  Enabled: true
+
+Style/MultilineHashBraceLayout:
+  Description: >-
+                 Checks that the closing brace in a hash literal is
+                 either on the same line as the last hash element, or
+                 a new line.
+  Enabled: true
+
+Style/MultilineIfThen:
+  Description: 'Do not use then for multi-line if/unless.'
+  StyleGuide: '#no-then'
+  Enabled: true
+
+Style/MultilineIfModifier:
+  Description: 'Only use if/unless modifiers on single line statements.'
+  StyleGuide: '#no-multiline-if-modifiers'
+  Enabled: true
+
+Style/MultilineMemoization:
+  Description: 'Wrap multiline memoizations in a `begin` and `end` block.'
+  Enabled: true
+
+Style/MultilineMethodCallBraceLayout:
+  Description: >-
+                 Checks that the closing brace in a method call is
+                 either on the same line as the last method argument, or
+                 a new line.
+  Enabled: true
+
+Style/MultilineMethodCallIndentation:
+  Description: >-
+                 Checks indentation of method calls with the dot operator
+                 that span more than one line.
+  Enabled: true
+
+Style/MultilineMethodDefinitionBraceLayout:
+  Description: >-
+                 Checks that the closing brace in a method definition is
+                 either on the same line as the last method parameter, or
+                 a new line.
+  Enabled: true
+
+Style/MultilineOperationIndentation:
+  Description: >-
+                 Checks indentation of binary operations that span more than
+                 one line.
+  Enabled: true
+
+Style/MultilineTernaryOperator:
+  Description: >-
+                 Avoid multi-line ?: (the ternary operator);
+                 use if/unless instead.
+  StyleGuide: '#no-multiline-ternary'
+  Enabled: true
+
+Style/MutableConstant:
+  Description: 'Do not assign mutable objects to constants.'
+  Enabled: true
+
+Style/NegatedIf:
+  Description: >-
+                 Favor unless over if for negative conditions
+                 (or control flow or).
+  StyleGuide: '#unless-for-negatives'
+  Enabled: true
+
+Style/NegatedWhile:
+  Description: 'Favor until over while for negative conditions.'
+  StyleGuide: '#until-for-negatives'
+  Enabled: true
+
+Style/NestedModifier:
+  Description: 'Avoid using nested modifiers.'
+  StyleGuide: '#no-nested-modifiers'
+  Enabled: true
+
+Style/NestedParenthesizedCalls:
+  Description: >-
+                 Parenthesize method calls which are nested inside the
+                 argument list of another parenthesized method call.
+  Enabled: true
+
+Style/NestedTernaryOperator:
+  Description: 'Use one expression per branch in a ternary operator.'
+  StyleGuide: '#no-nested-ternary'
+  Enabled: true
+
+Style/Next:
+  Description: 'Use `next` to skip iteration instead of a condition at the end.'
+  StyleGuide: '#no-nested-conditionals'
+  Enabled: true
+
+Style/NilComparison:
+  Description: 'Prefer x.nil? to x == nil.'
+  StyleGuide: '#predicate-methods'
+  Enabled: true
+
+Style/NonNilCheck:
+  Description: 'Checks for redundant nil checks.'
+  StyleGuide: '#no-non-nil-checks'
+  Enabled: true
+
+Style/Not:
+  Description: 'Use ! instead of not.'
+  StyleGuide: '#bang-not-not'
+  Enabled: true
+
+Style/NumericLiterals:
+  Description: >-
+                 Add underscores to large numeric literals to improve their
+                 readability.
+  StyleGuide: '#underscores-in-numerics'
+  Enabled: true
+
+Style/NumericLiteralPrefix:
+  Description: 'Use smallcase prefixes for numeric literals.'
+  StyleGuide: '#numeric-literal-prefixes'
+  Enabled: true
+
+Style/NumericPredicate:
+  Description: >-
+                 Checks for the use of predicate- or comparison methods for
+                 numeric comparisons.
+  StyleGuide: '#predicate-methods'
+  # This will change to a new method call which isn't guaranteed to be on the
+  # object. Switching these methods has to be done with knowledge of the types
+  # of the variables which rubocop doesn't have.
+  AutoCorrect: false
+  Enabled: true
+
+Style/OneLineConditional:
+  Description: >-
+                 Favor the ternary operator(?:) over
+                 if/then/else/end constructs.
+  StyleGuide: '#ternary-operator'
+  Enabled: true
+
+Style/OpMethod:
+  Description: 'When defining binary operators, name the argument other.'
+  StyleGuide: '#other-arg'
+  Enabled: true
+
+Style/OptionalArguments:
+  Description: >-
+                 Checks for optional arguments that do not appear at the end
+                 of the argument list
+  StyleGuide: '#optional-arguments'
+  Enabled: true
+
+Style/ParallelAssignment:
+  Description: >-
+                  Check for simple usages of parallel assignment.
+                  It will only warn when the number of variables
+                  matches on both sides of the assignment.
+  StyleGuide: '#parallel-assignment'
+  Enabled: true
+
+Style/ParenthesesAroundCondition:
+  Description: >-
+                 Don't use parentheses around the condition of an
+                 if/unless/while.
+  StyleGuide: '#no-parens-around-condition'
+  Enabled: true
+
+Style/PercentLiteralDelimiters:
+  Description: 'Use `%`-literal delimiters consistently'
+  StyleGuide: '#percent-literal-braces'
+  Enabled: true
+
+Style/PercentQLiterals:
+  Description: 'Checks if uses of %Q/%q match the configured preference.'
+  Enabled: true
+
+Style/PerlBackrefs:
+  Description: 'Avoid Perl-style regex back references.'
+  StyleGuide: '#no-perl-regexp-last-matchers'
+  Enabled: true
+
+Style/PredicateName:
+  Description: 'Check the names of predicate methods.'
+  StyleGuide: '#bool-methods-qmark'
+  Enabled: true
+
+Style/PreferredHashMethods:
+  Description: 'Checks use of `has_key?` and `has_value?` Hash methods.'
+  StyleGuide: '#hash-key'
+  Enabled: true
+
+Style/Proc:
+  Description: 'Use proc instead of Proc.new.'
+  StyleGuide: '#proc'
+  Enabled: true
+
+Style/RaiseArgs:
+  Description: 'Checks the arguments passed to raise/fail.'
+  StyleGuide: '#exception-class-messages'
+  Enabled: true
+
+Style/RedundantBegin:
+  Description: "Don't use begin blocks when they are not needed."
+  StyleGuide: '#begin-implicit'
+  Enabled: true
+
+Style/RedundantException:
+  Description: "Checks for an obsolete RuntimeException argument in raise/fail."
+  StyleGuide: '#no-explicit-runtimeerror'
+  Enabled: true
+
+Style/RedundantFreeze:
+  Description: "Checks usages of Object#freeze on immutable objects."
+  Enabled: true
+
+Style/RedundantParentheses:
+  Description: "Checks for parentheses that seem not to serve any purpose."
+  Enabled: true
+
+Style/RedundantReturn:
+  Description: "Don't use return where it's not required."
+  StyleGuide: '#no-explicit-return'
+  Enabled: true
+
+Style/RedundantSelf:
+  Description: "Don't use self where it's not needed."
+  StyleGuide: '#no-self-unless-required'
+  Enabled: true
+
+Style/RegexpLiteral:
+  Description: 'Use / or %r around regular expressions.'
+  StyleGuide: '#percent-r'
+  Enabled: true
+
+Style/RescueEnsureAlignment:
+  Description: 'Align rescues and ensures correctly.'
+  Enabled: true
+
+Style/RescueModifier:
+  Description: 'Avoid using rescue in its modifier form.'
+  StyleGuide: '#no-rescue-modifiers'
+  Enabled: true
+
+Style/SafeNavigation:
+  Description: >-
+                  This cop transforms usages of a method call safeguarded by
+                  a check for the existance of the object to
+                  safe navigation (`&.`).
+  Enabled: true
+
+Style/SelfAssignment:
+  Description: >-
+                 Checks for places where self-assignment shorthand should have
+                 been used.
+  StyleGuide: '#self-assignment'
+  Enabled: true
+
+Style/Semicolon:
+  Description: "Don't use semicolons to terminate expressions."
+  StyleGuide: '#no-semicolon'
+  Enabled: true
+
+Style/SignalException:
+  Description: 'Checks for proper usage of fail and raise.'
+  StyleGuide: '#prefer-raise-over-fail'
+  Enabled: true
+
+Style/SingleLineBlockParams:
+  Description: 'Enforces the names of some block params.'
+  Enabled: true
+
+Style/SingleLineMethods:
+  Description: 'Avoid single-line methods.'
+  StyleGuide: '#no-single-line-methods'
+  Enabled: true
+
+Style/SpaceBeforeFirstArg:
+  Description: >-
+                 Checks that exactly one space is used between a method name
+                 and the first argument for method calls without parentheses.
+  Enabled: true
+
+Style/SpaceAfterColon:
+  Description: 'Use spaces after colons.'
+  StyleGuide: '#spaces-operators'
+  Enabled: true
+
+Style/SpaceAfterComma:
+  Description: 'Use spaces after commas.'
+  StyleGuide: '#spaces-operators'
+  Enabled: true
+
+Style/SpaceAfterMethodName:
+  Description: >-
+                 Do not put a space between a method name and the opening
+                 parenthesis in a method definition.
+  StyleGuide: '#parens-no-spaces'
+  Enabled: true
+
+Style/SpaceAfterNot:
+  Description: Tracks redundant space after the ! operator.
+  StyleGuide: '#no-space-bang'
+  Enabled: true
+
+Style/SpaceAfterSemicolon:
+  Description: 'Use spaces after semicolons.'
+  StyleGuide: '#spaces-operators'
+  Enabled: true
+
+Style/SpaceBeforeBlockBraces:
+  Description: >-
+                 Checks that the left block brace has or doesn't have space
+                 before it.
+  Enabled: true
+
+Style/SpaceBeforeComma:
+  Description: 'No spaces before commas.'
+  Enabled: true
+
+Style/SpaceBeforeComment:
+  Description: >-
+                 Checks for missing space between code and a comment on the
+                 same line.
+  Enabled: true
+
+Style/SpaceBeforeSemicolon:
+  Description: 'No spaces before semicolons.'
+  Enabled: true
+
+Style/SpaceInsideBlockBraces:
+  Description: >-
+                 Checks that block braces have or don't have surrounding space.
+                 For blocks taking parameters, checks that the left brace has
+                 or doesn't have trailing space.
+  Enabled: true
+
+Style/SpaceAroundBlockParameters:
+  Description: 'Checks the spacing inside and after block parameters pipes.'
+  Enabled: true
+
+Style/SpaceAroundEqualsInParameterDefault:
+  Description: >-
+                 Checks that the equals signs in parameter default assignments
+                 have or don't have surrounding space depending on
+                 configuration.
+  StyleGuide: '#spaces-around-equals'
+  Enabled: true
+
+Style/SpaceAroundKeyword:
+  Description: 'Use a space around keywords if appropriate.'
+  Enabled: true
+
+Style/SpaceAroundOperators:
+  Description: 'Use a single space around operators.'
+  StyleGuide: '#spaces-operators'
+  Enabled: true
+
+Style/SpaceInsideArrayPercentLiteral:
+  Description: 'No unnecessary additional spaces between elements in %i/%w literals.'
+  Enabled: true
+
+Style/SpaceInsidePercentLiteralDelimiters:
+  Description: 'No unnecessary spaces inside delimiters of %i/%w/%x literals.'
+  Enabled: true
+
+Style/SpaceInsideBrackets:
+  Description: 'No spaces after [ or before ].'
+  StyleGuide: '#no-spaces-braces'
+  Enabled: true
+
+Style/SpaceInsideHashLiteralBraces:
+  Description: "Use spaces inside hash literal braces - or don't."
+  StyleGuide: '#spaces-operators'
+  Enabled: true
+
+Style/SpaceInsideParens:
+  Description: 'No spaces after ( or before ).'
+  StyleGuide: '#no-spaces-braces'
+  Enabled: true
+
+Style/SpaceInsideRangeLiteral:
+  Description: 'No spaces inside range literals.'
+  StyleGuide: '#no-space-inside-range-literals'
+  Enabled: true
+
+Style/SpaceInsideStringInterpolation:
+  Description: 'Checks for padding/surrounding spaces inside string interpolation.'
+  StyleGuide: '#string-interpolation'
+  Enabled: true
+
+Style/SpecialGlobalVars:
+  Description: 'Avoid Perl-style global variables.'
+  StyleGuide: '#no-cryptic-perlisms'
+  Enabled: true
+
+Style/StabbyLambdaParentheses:
+  Description: 'Check for the usage of parentheses around stabby lambda arguments.'
+  StyleGuide: '#stabby-lambda-with-args'
+  Enabled: true
+
+Style/StringLiterals:
+  Description: 'Checks if uses of quotes match the configured preference.'
+  StyleGuide: '#consistent-string-literals'
+  Enabled: true
+
+Style/StringLiteralsInInterpolation:
+  Description: >-
+                 Checks if uses of quotes inside expressions in interpolated
+                 strings match the configured preference.
+  Enabled: true
+
+Style/StructInheritance:
+  Description: 'Checks for inheritance from Struct.new.'
+  StyleGuide: '#no-extend-struct-new'
+  Enabled: true
+
+Style/SymbolLiteral:
+  Description: 'Use plain symbols instead of string symbols when possible.'
+  Enabled: true
+
+Style/SymbolProc:
+  Description: 'Use symbols as procs instead of blocks when possible.'
+  Enabled: true
+
+Style/Tab:
+  Description: 'No hard tabs.'
+  StyleGuide: '#spaces-indentation'
+  Enabled: true
+
+Style/TernaryParentheses:
+  Description: 'Checks for use of parentheses around ternary conditions.'
+  Enabled: true
+
+Style/TrailingBlankLines:
+  Description: 'Checks trailing blank lines and final newline.'
+  StyleGuide: '#newline-eof'
+  Enabled: true
+
+Style/TrailingCommaInArguments:
+  Description: 'Checks for trailing comma in argument lists.'
+  StyleGuide: '#no-trailing-params-comma'
+  Enabled: true
+
+Style/TrailingCommaInLiteral:
+  Description: 'Checks for trailing comma in array and hash literals.'
+  StyleGuide: '#no-trailing-array-commas'
+  Enabled: true
+
+Style/TrailingWhitespace:
+  Description: 'Avoid trailing whitespace.'
+  StyleGuide: '#no-trailing-whitespace'
+  Enabled: true
+
+Style/TrivialAccessors:
+  Description: 'Prefer attr_* methods to trivial readers/writers.'
+  StyleGuide: '#attr_family'
+  Enabled: true
+
+Style/UnlessElse:
+  Description: >-
+                 Do not use unless with else. Rewrite these with the positive
+                 case first.
+  StyleGuide: '#no-else-with-unless'
+  Enabled: true
+
+Style/UnneededCapitalW:
+  Description: 'Checks for %W when interpolation is not needed.'
+  Enabled: true
+
+Style/UnneededInterpolation:
+  Description: 'Checks for strings that are just an interpolated expression.'
+  Enabled: true
+
+Style/UnneededPercentQ:
+  Description: 'Checks for %q/%Q when single quotes or double quotes would do.'
+  StyleGuide: '#percent-q'
+  Enabled: true
+
+Style/TrailingUnderscoreVariable:
+  Description: >-
+                 Checks for the usage of unneeded trailing underscores at the
+                 end of parallel variable assignment.
+  AllowNamedUnderscoreVariables: true
+  Enabled: true
+
+Style/VariableInterpolation:
+  Description: >-
+                 Don't interpolate global, instance and class variables
+                 directly in strings.
+  StyleGuide: '#curlies-interpolate'
+  Enabled: true
+
+Style/VariableName:
+  Description: 'Use the configured style when naming variables.'
+  StyleGuide: '#snake-case-symbols-methods-vars'
+  Enabled: true
+
+Style/VariableNumber:
+  Description: 'Use the configured style when numbering variables.'
+  Enabled: true
+
+Style/WhenThen:
+  Description: 'Use when x then ... for one-line cases.'
+  StyleGuide: '#one-line-cases'
+  Enabled: true
+
+Style/WhileUntilDo:
+  Description: 'Checks for redundant do after while or until.'
+  StyleGuide: '#no-multiline-while-do'
+  Enabled: true
+
+Style/WhileUntilModifier:
+  Description: >-
+                 Favor modifier while/until usage when you have a
+                 single-line body.
+  StyleGuide: '#while-as-a-modifier'
+  Enabled: true
+
+Style/WordArray:
+  Description: 'Use %w or %W for arrays of words.'
+  StyleGuide: '#percent-w'
+  Enabled: true
+
+Style/ZeroLengthPredicate:
+  Description: 'Use #empty? when testing for objects of length 0.'
+  Enabled: true
+
+#################### Metrics ################################
+
+Metrics/AbcSize:
+  Description: >-
+                 A calculated magnitude based on number of assignments,
+                 branches, and conditions.
+  Reference: 'http://c2.com/cgi/wiki?AbcMetric'
+  Enabled: true
+
+Metrics/BlockNesting:
+  Description: 'Avoid excessive block nesting'
+  StyleGuide: '#three-is-the-number-thou-shalt-count'
+  Enabled: true
+
+Metrics/ClassLength:
+  Description: 'Avoid classes longer than 100 lines of code.'
+  Enabled: true
+
+Metrics/ModuleLength:
+  Description: 'Avoid modules longer than 100 lines of code.'
+  Enabled: true
+
+Metrics/CyclomaticComplexity:
+  Description: >-
+                 A complexity metric that is strongly correlated to the number
+                 of test cases needed to validate a method.
+  Enabled: true
+
+Metrics/LineLength:
+  Description: 'Limit lines to 80 characters.'
+  StyleGuide: '#80-character-limits'
+  Enabled: true
+
+Metrics/MethodLength:
+  Description: 'Avoid methods longer than 10 lines of code.'
+  StyleGuide: '#short-methods'
+  Enabled: true
+
+Metrics/BlockLength:
+  Description: 'Avoid long blocks with many lines.'
+  Enabled: true
+
+Metrics/ParameterLists:
+  Description: 'Avoid parameter lists longer than three or four parameters.'
+  StyleGuide: '#too-many-params'
+  Enabled: true
+
+Metrics/PerceivedComplexity:
+  Description: >-
+                 A complexity metric geared towards measuring complexity for a
+                 human reader.
+  Enabled: true
+
+#################### Lint ################################
+### Warnings
+
+Lint/AmbiguousOperator:
+  Description: >-
+                 Checks for ambiguous operators in the first argument of a
+                 method invocation without parentheses.
+  StyleGuide: '#method-invocation-parens'
+  Enabled: true
+
+Lint/AmbiguousRegexpLiteral:
+  Description: >-
+                 Checks for ambiguous regexp literals in the first argument of
+                 a method invocation without parentheses.
+  Enabled: true
+
+Lint/AssignmentInCondition:
+  Description: "Don't use assignment in conditions."
+  StyleGuide: '#safe-assignment-in-condition'
+  Enabled: true
+
+Lint/BlockAlignment:
+  Description: 'Align block ends correctly.'
+  Enabled: true
+
+Lint/CircularArgumentReference:
+  Description: "Default values in optional keyword arguments and optional ordinal arguments should not refer back to the name of the argument."
+  Enabled: true
+
+Lint/ConditionPosition:
+  Description: >-
+                 Checks for condition placed in a confusing position relative to
+                 the keyword.
+  StyleGuide: '#same-line-condition'
+  Enabled: true
+
+Lint/Debugger:
+  Description: 'Check for debugger calls.'
+  Enabled: true
+
+Lint/DefEndAlignment:
+  Description: 'Align ends corresponding to defs correctly.'
+  Enabled: true
+
+Lint/DeprecatedClassMethods:
+  Description: 'Check for deprecated class method calls.'
+  Enabled: true
+
+Lint/DuplicateCaseCondition:
+  Description: 'Do not repeat values in case conditionals.'
+  Enabled: true
+
+Lint/DuplicateMethods:
+  Description: 'Check for duplicate method definitions.'
+  Enabled: true
+
+Lint/DuplicatedKey:
+  Description: 'Check for duplicate keys in hash literals.'
+  Enabled: true
+
+Lint/EachWithObjectArgument:
+  Description: 'Check for immutable argument given to each_with_object.'
+  Enabled: true
+
+Lint/ElseLayout:
+  Description: 'Check for odd code arrangement in an else block.'
+  Enabled: true
+
+Lint/EmptyEnsure:
+  Description: 'Checks for empty ensure block.'
+  Enabled: true
+
+Lint/EmptyExpression:
+  Description: 'Checks for empty expressions.'
+  Enabled: true
+
+Lint/EmptyInterpolation:
+  Description: 'Checks for empty string interpolation.'
+  Enabled: true
+
+Lint/EmptyWhen:
+  Description: 'Checks for `when` branches with empty bodies.'
+  Enabled: true
+
+Lint/EndAlignment:
+  Description: 'Align ends correctly.'
+  Enabled: true
+
+Lint/EndInMethod:
+  Description: 'END blocks should not be placed inside method definitions.'
+  Enabled: true
+
+Lint/EnsureReturn:
+  Description: 'Do not use return in an ensure block.'
+  StyleGuide: '#no-return-ensure'
+  Enabled: true
+
+Lint/Eval:
+  Description: 'The use of eval represents a serious security risk.'
+  Enabled: true
+
+Lint/FloatOutOfRange:
+  Description: >-
+                 Catches floating-point literals too large or small for Ruby to
+                 represent.
+  Enabled: true
+
+Lint/FormatParameterMismatch:
+  Description: 'The number of parameters to format/sprint must match the fields.'
+  Enabled: true
+
+Lint/HandleExceptions:
+  Description: "Don't suppress exception."
+  StyleGuide: '#dont-hide-exceptions'
+  Enabled: true
+
+Lint/ImplicitStringConcatenation:
+  Description: >-
+                 Checks for adjacent string literals on the same line, which
+                 could better be represented as a single string literal.
+  Enabled: true
+
+Lint/IneffectiveAccessModifier:
+  Description: >-
+                 Checks for attempts to use `private` or `protected` to set
+                 the visibility of a class method, which does not work.
+  Enabled: true
+
+Lint/InheritException:
+  Description: 'Avoid inheriting from the `Exception` class.'
+  Enabled: true
+
+Lint/InvalidCharacterLiteral:
+  Description: >-
+                 Checks for invalid character literals with a non-escaped
+                 whitespace character.
+  Enabled: true
+
+Lint/LiteralInCondition:
+  Description: 'Checks of literals used in conditions.'
+  Enabled: true
+
+Lint/LiteralInInterpolation:
+  Description: 'Checks for literals used in interpolation.'
+  Enabled: true
+
+Lint/Loop:
+  Description: >-
+                 Use Kernel#loop with break rather than begin/end/until or
+                 begin/end/while for post-loop tests.
+  StyleGuide: '#loop-with-break'
+  Enabled: true
+
+Lint/NestedMethodDefinition:
+  Description: 'Do not use nested method definitions.'
+  StyleGuide: '#no-nested-methods'
+  Enabled: true
+
+Lint/NextWithoutAccumulator:
+  Description:  >-
+                  Do not omit the accumulator when calling `next`
+                  in a `reduce`/`inject` block.
+  Enabled: true
+
+Lint/NonLocalExitFromIterator:
+  Description: 'Do not use return in iterator to cause non-local exit.'
+  Enabled: true
+
+Lint/ParenthesesAsGroupedExpression:
+  Description: >-
+                 Checks for method calls with a space before the opening
+                 parenthesis.
+  StyleGuide: '#parens-no-spaces'
+  Enabled: true
+
+Lint/PercentStringArray:
+  Description: >-
+                 Checks for unwanted commas and quotes in %w/%W literals.
+  Enabled: true
+
+Lint/PercentSymbolArray:
+  Description: >-
+                 Checks for unwanted commas and colons in %i/%I literals.
+  Enabled: true
+
+Lint/RandOne:
+  Description: >-
+                 Checks for `rand(1)` calls. Such calls always return `0`
+                 and most likely a mistake.
+  Enabled: true
+
+Lint/RequireParentheses:
+  Description: >-
+                 Use parentheses in the method call to avoid confusion
+                 about precedence.
+  Enabled: true
+
+Lint/RescueException:
+  Description: 'Avoid rescuing the Exception class.'
+  StyleGuide: '#no-blind-rescues'
+  Enabled: true
+
+Lint/ShadowedException:
+  Description: >-
+                  Avoid rescuing a higher level exception
+                  before a lower level exception.
+  Enabled: true
+
+Lint/ShadowingOuterLocalVariable:
+  Description: >-
+                 Do not use the same name as outer local variable
+                 for block arguments or block local variables.
+  Enabled: true
+
+Lint/StringConversionInInterpolation:
+  Description: 'Checks for Object#to_s usage in string interpolation.'
+  StyleGuide: '#no-to-s'
+  Enabled: true
+
+Lint/UnderscorePrefixedVariableName:
+  Description: 'Do not use prefix `_` for a variable that is used.'
+  Enabled: true
+
+Lint/UnifiedInteger:
+  Description: 'Use Integer instead of Fixnum or Bignum'
+  Enabled: true
+
+Lint/UnneededDisable:
+  Description: >-
+                 Checks for rubocop:disable comments that can be removed.
+                 Note: this cop is not disabled when disabling all cops.
+                 It must be explicitly disabled.
+  Enabled: true
+
+Lint/UnneededSplatExpansion:
+  Description: 'Checks for splat unnecessarily being called on literals'
+  Enabled: true
+
+Lint/UnusedBlockArgument:
+  Description: 'Checks for unused block arguments.'
+  StyleGuide: '#underscore-unused-vars'
+  Enabled: true
+
+Lint/UnusedMethodArgument:
+  Description: 'Checks for unused method arguments.'
+  StyleGuide: '#underscore-unused-vars'
+  Enabled: true
+
+Lint/UnreachableCode:
+  Description: 'Unreachable code.'
+  Enabled: true
+
+Lint/UselessAccessModifier:
+  Description: 'Checks for useless access modifiers.'
+  Enabled: true
+  ContextCreatingMethods: []
+
+Lint/UselessAssignment:
+  Description: 'Checks for useless assignment to a local variable.'
+  StyleGuide: '#underscore-unused-vars'
+  Enabled: true
+
+Lint/UselessComparison:
+  Description: 'Checks for comparison of something with itself.'
+  Enabled: true
+
+Lint/UselessElseWithoutRescue:
+  Description: 'Checks for useless `else` in `begin..end` without `rescue`.'
+  Enabled: true
+
+Lint/UselessSetterCall:
+  Description: 'Checks for useless setter call to a local variable.'
+  Enabled: true
+
+Lint/Void:
+  Description: 'Possible use of operator/literal/variable in void context.'
+  Enabled: true
+
+##################### Performance #############################
+
+Performance/Casecmp:
+  Description: >-
+             Use `casecmp` rather than `downcase ==`, `upcase ==`, `== downcase`, or `== upcase`..
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#stringcasecmp-vs-stringdowncase---code'
+  Enabled: true
+
+Performance/CaseWhenSplat:
+  Description: >-
+                  Place `when` conditions that use splat at the end
+                  of the list of `when` branches.
+  Enabled: true
+
+Performance/Count:
+  Description: >-
+                  Use `count` instead of `select...size`, `reject...size`,
+                  `select...count`, `reject...count`, `select...length`,
+                  and `reject...length`.
+  # This cop has known compatibility issues with `ActiveRecord` and other
+  # frameworks. ActiveRecord's `count` ignores the block that is passed to it.
+  # For more information, see the documentation in the cop itself.
+  # If you understand the known risk, you can disable `SafeMode`.
+  SafeMode: true
+  Enabled: true
+
+Performance/Detect:
+  Description: >-
+                  Use `detect` instead of `select.first`, `find_all.first`,
+                  `select.last`, and `find_all.last`.
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#enumerabledetect-vs-enumerableselectfirst-code'
+  # This cop has known compatibility issues with `ActiveRecord` and other
+  # frameworks. `ActiveRecord` does not implement a `detect` method and `find`
+  # has its own meaning. Correcting `ActiveRecord` methods with this cop
+  # should be considered unsafe.
+  SafeMode: true
+  Enabled: true
+
+Performance/DoubleStartEndWith:
+  Description: >-
+                  Use `str.{start,end}_with?(x, ..., y, ...)`
+                  instead of `str.{start,end}_with?(x, ...) || str.{start,end}_with?(y, ...)`.
+  Enabled: true
+
+Performance/EndWith:
+  Description: 'Use `end_with?` instead of a regex match anchored to the end of a string.'
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#stringmatch-vs-stringstart_withstringend_with-code-start-code-end'
+  # This will change to a new method call which isn't guaranteed to be on the
+  # object. Switching these methods has to be done with knowledge of the types
+  # of the variables which rubocop doesn't have.
+  AutoCorrect: false
+  Enabled: true
+
+Performance/FixedSize:
+  Description: 'Do not compute the size of statically sized objects except in constants'
+  Enabled: true
+
+Performance/FlatMap:
+  Description: >-
+                  Use `Enumerable#flat_map`
+                  instead of `Enumerable#map...Array#flatten(1)`
+                  or `Enumberable#collect..Array#flatten(1)`
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#enumerablemaparrayflatten-vs-enumerableflat_map-code'
+  Enabled: true
+  EnabledForFlattenWithoutParams: false
+  # If enabled, this cop will warn about usages of
+  # `flatten` being called without any parameters.
+  # This can be dangerous since `flat_map` will only flatten 1 level, and
+  # `flatten` without any parameters can flatten multiple levels.
+
+Performance/HashEachMethods:
+  Description: >-
+                 Use `Hash#each_key` and `Hash#each_value` instead of
+                 `Hash#keys.each` and `Hash#values.each`.
+  StyleGuide: '#hash-each'
+  Enabled: true
+  AutoCorrect: false
+
+Performance/LstripRstrip:
+  Description: 'Use `strip` instead of `lstrip.rstrip`.'
+  Enabled: true
+
+Performance/RangeInclude:
+  Description: 'Use `Range#cover?` instead of `Range#include?`.'
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#cover-vs-include-code'
+  Enabled: true
+
+Performance/RedundantBlockCall:
+  Description: 'Use `yield` instead of `block.call`.'
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#proccall-vs-yield-code'
+  Enabled: true
+
+Performance/RedundantMatch:
+  Description: >-
+                  Use `=~` instead of `String#match` or `Regexp#match` in a context where the
+                  returned `MatchData` is not needed.
+  Enabled: true
+
+Performance/RedundantMerge:
+  Description: 'Use Hash#[]=, rather than Hash#merge! with a single key-value pair.'
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#hashmerge-vs-hash-code'
+  Enabled: true
+
+Performance/RedundantSortBy:
+  Description: 'Use `sort` instead of `sort_by { |x| x }`.'
+  Enabled: true
+
+Performance/ReverseEach:
+  Description: 'Use `reverse_each` instead of `reverse.each`.'
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#enumerablereverseeach-vs-enumerablereverse_each-code'
+  Enabled: true
+
+Performance/Sample:
+  Description: >-
+                  Use `sample` instead of `shuffle.first`,
+                  `shuffle.last`, and `shuffle[Integer]`.
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#arrayshufflefirst-vs-arraysample-code'
+  Enabled: true
+
+Performance/Size:
+  Description: >-
+                  Use `size` instead of `count` for counting
+                  the number of elements in `Array` and `Hash`.
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#arraycount-vs-arraysize-code'
+  Enabled: true
+
+Performance/CompareWithBlock:
+  Description: 'Use `sort_by(&:foo)` instead of `sort_by { |a, b| a.foo <=> b.foo }`.'
+  Enabled: true
+
+Performance/StartWith:
+  Description: 'Use `start_with?` instead of a regex match anchored to the beginning of a string.'
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#stringmatch-vs-stringstart_withstringend_with-code-start-code-end'
+  # This will change to a new method call which isn't guaranteed to be on the
+  # object. Switching these methods has to be done with knowledge of the types
+  # of the variables which rubocop doesn't have.
+  AutoCorrect: false
+  Enabled: true
+
+Performance/StringReplacement:
+  Description: >-
+                  Use `tr` instead of `gsub` when you are replacing the same
+                  number of characters. Use `delete` instead of `gsub` when
+                  you are deleting characters.
+  Reference: 'https://github.com/JuanitoFatas/fast-ruby#stringgsub-vs-stringtr-code'
+  Enabled: true
+
+Performance/TimesMap:
+  Description: 'Checks for .times.map calls.'
+  Enabled: true
+
+##################### Rails ##################################
+
+Rails/ActionFilter:
+  Description: 'Enforces consistent use of action filter methods.'
+  Enabled: true
+
+Rails/Date:
+  Description: >-
+                  Checks the correct usage of date aware methods,
+                  such as Date.today, Date.current etc.
+  Enabled: true
+
+Rails/Delegate:
+  Description: 'Prefer delegate method for delegations.'
+  Enabled: true
+
+Rails/DelegateAllowBlank:
+  Description: 'Do not use allow_blank as an option to delegate.'
+  Enabled: true
+
+Rails/DynamicFindBy:
+  Description: 'Use `find_by` instead of dynamic `find_by_*`.'
+  StyleGuide: 'https://github.com/bbatsov/rails-style-guide#find_by'
+  Enabled: true
+
+Rails/EnumUniqueness:
+  Description: 'Avoid duplicate integers in hash-syntax `enum` declaration.'
+  Enabled: true
+
+Rails/Exit:
+  Description: >-
+                  Favor `fail`, `break`, `return`, etc. over `exit` in
+                  application or library code outside of Rake files to avoid
+                  exits during unit testing or running in production.
+  Enabled: true
+
+Rails/FindBy:
+  Description: 'Prefer find_by over where.first.'
+  StyleGuide: 'https://github.com/bbatsov/rails-style-guide#find_by'
+  Enabled: true
+
+Rails/FindEach:
+  Description: 'Prefer all.find_each over all.find.'
+  StyleGuide: 'https://github.com/bbatsov/rails-style-guide#find-each'
+  Enabled: true
+
+Rails/HasAndBelongsToMany:
+  Description: 'Prefer has_many :through to has_and_belongs_to_many.'
+  StyleGuide: 'https://github.com/bbatsov/rails-style-guide#has-many-through'
+  Enabled: true
+
+Rails/HttpPositionalArguments:
+  Description: 'Use keyword arguments instead of positional arguments in http method calls.'
+  Enabled: true
+  Include:
+    - 'spec/**/*'
+    - 'test/**/*'
+
+Rails/NotNullColumn:
+  Description: 'Do not add a NOT NULL column without a default value'
+  Enabled: true
+
+Rails/Output:
+  Description: 'Checks for calls to puts, print, etc.'
+  Enabled: true
+
+Rails/OutputSafety:
+  Description: 'The use of `html_safe` or `raw` may be a security risk.'
+  Enabled: true
+
+Rails/PluralizationGrammar:
+  Description: 'Checks for incorrect grammar when using methods like `3.day.ago`.'
+  Enabled: true
+
+Rails/ReadWriteAttribute:
+  Description: >-
+                 Checks for read_attribute(:attr) and
+                 write_attribute(:attr, val).
+  StyleGuide: 'https://github.com/bbatsov/rails-style-guide#read-attribute'
+  Enabled: true
+
+Rails/RequestReferer:
+  Description: 'Use consistent syntax for request.referer.'
+  Enabled: true
+
+Rails/SafeNavigation:
+  Description: "Use Ruby's safe navigation operator (`&.`) instead of `try!`"
+  Enabled: true
+
+Rails/ScopeArgs:
+  Description: 'Checks the arguments of ActiveRecord scopes.'
+  Enabled: true
+
+Rails/TimeZone:
+  Description: 'Checks the correct usage of time zone aware methods.'
+  StyleGuide: 'https://github.com/bbatsov/rails-style-guide#time'
+  Reference: 'http://danilenko.org/2012/7/6/rails_timezones'
+  Enabled: true
+
+Rails/UniqBeforePluck:
+  Description: 'Prefer the use of uniq or distinct before pluck.'
+  Enabled: true
+
+Rails/Validation:
+  Description: 'Use validates :attribute, hash of validations.'
+  Enabled: true
+
+Security/JSONLoad:
+  Description: >-
+                 Prefer usage of `JSON.parse` over `JSON.load` due to potential
+                 security issues. See reference for more information.
+  Reference: 'http://ruby-doc.org/stdlib-2.3.0/libdoc/json/rdoc/JSON.html#method-i-load'
+  Enabled: true
+  # Autocorrect here will change to a method that may cause crashes depending
+  # on the value of the argument.
+  AutoCorrect: false
+
+##################### Bundler #############################
+
+Bundler/DuplicatedGem:
+  Description: 'Checks for duplicate gem entries in Gemfile.'
+  Enabled: true
+  Include:
+    - '**/Gemfile'
+    - '**/gems.rb'
+
+Bundler/OrderedGems:
+  Description: >-
+                 Sort alphabetically gems appearing within a contiguous set
+                 of lines in the Gemfile
+  Enabled: true
+  Include:
+    - '**/Gemfile'
+    - '**/gems.rb'