dirty_history 0.5.2 → 0.5.3

data/dirty_history/ruby/1.9.1/gems/dirty_history-0.2.0/dirty_history/ruby/1.9.1/gems/dirty_history-0.2.0/dirty_history/ruby/1.9.1/gems/rcov-0.9.9/lib/rcov/code_coverage_analyzer.rb

@@ -1,271 +0,0 @@
-module Rcov
-  # A CodeCoverageAnalyzer is responsible for tracing code execution and
-  # returning code coverage and execution count information.
-  #
-  # Note that you must <tt>require 'rcov'</tt> before the code you want to
-  # analyze is parsed (i.e. before it gets loaded or required). You can do that
-  # by either invoking ruby with the <tt>-rrcov</tt> command-line option or
-  # just:
-  #  require 'rcov'
-  #  require 'mycode'
-  #  # ....
-  #
-  # == Example
-  #
-  #  analyzer = Rcov::CodeCoverageAnalyzer.new
-  #  analyzer.run_hooked do 
-  #    do_foo  
-  #    # all the code executed as a result of this method call is traced
-  #  end
-  #  # ....
-  #  
-  #  analyzer.run_hooked do 
-  #    do_bar
-  #    # the code coverage information generated in this run is aggregated
-  #    # to the previously recorded one
-  #  end
-  #
-  #  analyzer.analyzed_files   # => ["foo.rb", "bar.rb", ... ]
-  #  lines, marked_info, count_info = analyzer.data("foo.rb")
-  #
-  # In this example, two pieces of code are monitored, and the data generated in
-  # both runs are aggregated. +lines+ is an array of strings representing the 
-  # source code of <tt>foo.rb</tt>. +marked_info+ is an array holding false,
-  # true values indicating whether the corresponding lines of code were reported
-  # as executed by Ruby. +count_info+ is an array of integers representing how
-  # many times each line of code has been executed (more precisely, how many
-  # events where reported by Ruby --- a single line might correspond to several
-  # events, e.g. many method calls).
-  #
-  # You can have several CodeCoverageAnalyzer objects at a time, and it is
-  # possible to nest the #run_hooked / #install_hook/#remove_hook blocks: each
-  # analyzer will manage its data separately. Note however that no special
-  # provision is taken to ignore code executed "inside" the CodeCoverageAnalyzer
-  # class. At any rate this will not pose a problem since it's easy to ignore it
-  # manually: just don't do
-  #   lines, coverage, counts = analyzer.data("/path/to/lib/rcov.rb")
-  # if you're not interested in that information.
-  class CodeCoverageAnalyzer < DifferentialAnalyzer
-    @hook_level = 0
-    # defined this way instead of attr_accessor so that it's covered
-    def self.hook_level      # :nodoc:
-      @hook_level 
-    end
-     
-    def self.hook_level=(x)  # :nodoc: 
-      @hook_level = x 
-    end 
-
-    def initialize
-      @script_lines__ = SCRIPT_LINES__
-      super(:install_coverage_hook, :remove_coverage_hook,
-            :reset_coverage)
-    end
-  
-    # Return an array with the names of the files whose code was executed inside
-    # the block given to #run_hooked or between #install_hook and #remove_hook.
-    def analyzed_files
-      update_script_lines__
-      raw_data_relative.select do |file, lines|
-        @script_lines__.has_key?(file)
-      end.map{|fname,| fname}
-    end
-
-    # Return the available data about the requested file, or nil if none of its
-    # code was executed or it cannot be found.
-    # The return value is an array with three elements:
-    #  lines, marked_info, count_info = analyzer.data("foo.rb")
-    # +lines+ is an array of strings representing the 
-    # source code of <tt>foo.rb</tt>. +marked_info+ is an array holding false,
-    # true values indicating whether the corresponding lines of code were reported
-    # as executed by Ruby. +count_info+ is an array of integers representing how
-    # many times each line of code has been executed (more precisely, how many
-    # events where reported by Ruby --- a single line might correspond to several
-    # events, e.g. many method calls).
-    #
-    # The returned data corresponds to the aggregation of all the statistics
-    # collected in each #run_hooked or #install_hook/#remove_hook runs. You can
-    # reset the data at any time with #reset to start from scratch.
-    def data(filename)
-      raw_data = raw_data_relative
-      update_script_lines__
-      unless @script_lines__.has_key?(filename) && 
-             raw_data.has_key?(filename)
-        return nil 
-      end
-      refine_coverage_info(@script_lines__[filename], raw_data[filename])
-    end
-
-    # Data for the first file matching the given regexp.
-    # See #data.
-    def data_matching(filename_re)
-      raw_data = raw_data_relative
-      update_script_lines__
-
-      match = raw_data.keys.sort.grep(filename_re).first
-      return nil unless match
-
-      refine_coverage_info(@script_lines__[match], raw_data[match])
-    end
-
-    # Execute the code in the given block, monitoring it in order to gather
-    # information about which code was executed.
-    def run_hooked; super end
-
-    # Start monitoring execution to gather code coverage and execution count
-    # information. Such data will be collected until #remove_hook is called.
-    #
-    # Use #run_hooked instead if possible.
-    def install_hook; super end
-
-    # Stop collecting code coverage and execution count information.
-    # #remove_hook will also stop collecting info if it is run inside a
-    # #run_hooked block.
-    def remove_hook; super end
-
-    # Remove the data collected so far. The coverage and execution count
-    # "history" will be erased, and further collection will start from scratch:
-    # no code is considered executed, and therefore all execution counts are 0.
-    # Right after #reset, #analyzed_files will return an empty array, and
-    # #data(filename) will return nil.
-    def reset; super end
-
-    def dump_coverage_info(formatters) # :nodoc:
-      update_script_lines__
-      raw_data_relative.each do |file, lines|
-        next if @script_lines__.has_key?(file) == false
-        lines = @script_lines__[file]
-        raw_coverage_array = raw_data_relative[file]
-
-        line_info, marked_info, 
-          count_info = refine_coverage_info(lines, raw_coverage_array)
-        formatters.each do |formatter|
-          formatter.add_file(file, line_info, marked_info, count_info)
-        end
-      end
-      formatters.each{|formatter| formatter.execute}
-    end
-
-    private
-
-    def data_default; {} end
-
-    def raw_data_absolute
-      Rcov::RCOV__.generate_coverage_info
-    end
-
-    def aggregate_data(aggregated_data, delta)
-      delta.each_pair do |file, cov_arr|
-        dest = (aggregated_data[file] ||= Array.new(cov_arr.size, 0))
-        cov_arr.each_with_index do |x,i| 
-          dest[i] ||= 0
-          dest[i] += x.to_i
-        end
-      end
-    end
-
-    def compute_raw_data_difference(first, last)
-      difference = {}
-      last.each_pair do |fname, cov_arr|
-        unless first.has_key?(fname)
-          difference[fname] = cov_arr.clone
-        else
-          orig_arr = first[fname]
-          diff_arr = Array.new(cov_arr.size, 0)
-          changed = false
-          cov_arr.each_with_index do |x, i|
-            diff_arr[i] = diff = (x || 0) - (orig_arr[i] || 0)
-            changed = true if diff != 0
-          end
-          difference[fname] = diff_arr if changed
-        end
-      end
-      difference
-    end
-
-    def refine_coverage_info(lines, covers)
-      marked_info = []
-      count_info = []
-      lines.size.times do |i|
-        c = covers[i]
-        marked_info << ((c && c > 0) ? true : false)
-        count_info << (c || 0)
-      end
-
-      script_lines_workaround(lines, marked_info, count_info)
-    end
-
-    # Try to detect repeated data, based on observed repetitions in line_info:
-    # this is a workaround for SCRIPT_LINES__[filename] including as many copies
-    # of the file as the number of times it was parsed.
-    def script_lines_workaround(line_info, coverage_info, count_info)
-      is_repeated = lambda do |div|
-        n = line_info.size / div
-        break false unless line_info.size % div == 0 && n > 1
-        different = false
-        n.times do |i|
-        
-          things = (0...div).map { |j| line_info[i + j * n] }
-          if things.uniq.size != 1
-            different = true
-            break
-          end
-        end
-
-        ! different
-      end
-
-      factors = braindead_factorize(line_info.size)
-      factors.each do |n|
-        if is_repeated[n]
-          line_info = line_info[0, line_info.size / n]
-          coverage_info = coverage_info[0, coverage_info.size / n]
-          count_info = count_info[0, count_info.size / n]
-        end
-      end if factors.size > 1   # don't even try if it's prime
-
-      [line_info, coverage_info, count_info]
-    end
-
-    def braindead_factorize(num)
-      return [0] if num == 0
-      return [-1] + braindead_factorize(-num) if num < 0
-      factors = []
-      while num % 2 == 0
-        factors << 2
-        num /= 2
-      end
-      size = num
-      n = 3
-      max = Math.sqrt(num)
-      while n <= max && n <= size
-        while size % n == 0
-          size /= n
-          factors << n
-        end
-        n += 2
-      end
-      factors << size if size != 1
-      factors
-    end
-
-    def update_script_lines__
-      @script_lines__ = @script_lines__.merge(SCRIPT_LINES__)
-    end
-
-    public
-
-    def marshal_dump # :nodoc:
-      # @script_lines__ is updated just before serialization so as to avoid
-      # missing files in SCRIPT_LINES__
-      ivs = {}
-      update_script_lines__
-      instance_variables.each{|iv| ivs[iv] = instance_variable_get(iv)}
-      ivs
-    end
-
-    def marshal_load(ivs) # :nodoc:
-      ivs.each_pair{|iv, val| instance_variable_set(iv, val)}
-    end
-  end # CodeCoverageAnalyzer
-end

data/dirty_history/ruby/1.9.1/gems/dirty_history-0.2.0/dirty_history/ruby/1.9.1/gems/dirty_history-0.2.0/dirty_history/ruby/1.9.1/gems/rcov-0.9.9/lib/rcov/coverage_info.rb

@@ -1,36 +0,0 @@
-# Rcov::CoverageInfo is but a wrapper for an array, with some additional
-# checks. It is returned by FileStatistics#coverage.
-class CoverageInfo
-  def initialize(coverage_array)
-    @cover = coverage_array.clone
-  end
-
-  # Return the coverage status for the requested line. There are four possible
-  # return values:
-  # * nil if there's no information for the requested line (i.e. it doesn't exist)
-  # * true if the line was reported by Ruby as executed
-  # * :inferred if rcov inferred it was executed, despite not being reported 
-  #   by Ruby.
-  # * false otherwise, i.e. if it was not reported by Ruby and rcov's
-  #   heuristics indicated that it was not executed
-  def [](line)
-    @cover[line]
-  end
-
-  def []=(line, val) # :nodoc:
-    unless [true, false, :inferred].include? val
-      raise RuntimeError, "What does #{val} mean?" 
-    end
-    return if line < 0 || line >= @cover.size
-    @cover[line] = val
-  end
-
-  # Return an Array holding the code coverage information.
-  def to_a
-    @cover.clone
-  end
-
-  def method_missing(meth, *a, &b) # :nodoc:
-    @cover.send(meth, *a, &b)
-  end
-end

data/dirty_history/ruby/1.9.1/gems/dirty_history-0.2.0/dirty_history/ruby/1.9.1/gems/dirty_history-0.2.0/dirty_history/ruby/1.9.1/gems/rcov-0.9.9/lib/rcov/differential_analyzer.rb

@@ -1,116 +0,0 @@
-module Rcov
-  class DifferentialAnalyzer
-    require 'thread'
-    @@mutex = Mutex.new
-
-    def initialize(install_hook_meth, remove_hook_meth, reset_meth)
-      @cache_state = :wait
-      @start_raw_data = data_default
-      @end_raw_data = data_default
-      @aggregated_data = data_default
-      @install_hook_meth = install_hook_meth
-      @remove_hook_meth= remove_hook_meth
-      @reset_meth= reset_meth
-    end
-
-    # Execute the code in the given block, monitoring it in order to gather
-    # information about which code was executed.
-    def run_hooked
-      install_hook
-      yield
-    ensure
-      remove_hook
-    end
-
-    # Start monitoring execution to gather information. Such data will be
-    # collected until #remove_hook is called.
-    #
-    # Use #run_hooked instead if possible.
-    def install_hook
-      @start_raw_data = raw_data_absolute
-      Rcov::RCOV__.send(@install_hook_meth)
-      @cache_state = :hooked
-      @@mutex.synchronize{ self.class.hook_level += 1 }
-    end
-
-    # Stop collecting information.
-    # #remove_hook will also stop collecting info if it is run inside a
-    # #run_hooked block.
-    def remove_hook
-      @@mutex.synchronize do 
-        self.class.hook_level -= 1
-        Rcov::RCOV__.send(@remove_hook_meth) if self.class.hook_level == 0
-      end
-      @end_raw_data = raw_data_absolute
-      @cache_state = :done
-      # force computation of the stats for the traced code in this run;
-      # we cannot simply let it be if self.class.hook_level == 0 because 
-      # some other analyzer could install a hook, causing the raw_data_absolute
-      # to change again.
-      # TODO: lazy computation of raw_data_relative, only when the hook gets
-      # activated again.
-      raw_data_relative
-    end
-
-    # Remove the data collected so far. Further collection will start from
-    # scratch.
-    def reset
-      @@mutex.synchronize do
-        if self.class.hook_level == 0
-          # Unfortunately there's no way to report this as covered with rcov:
-          # if we run the tests under rcov self.class.hook_level will be >= 1 !
-          # It is however executed when we run the tests normally.
-          Rcov::RCOV__.send(@reset_meth)
-          @start_raw_data = data_default
-          @end_raw_data = data_default
-        else
-          @start_raw_data = @end_raw_data = raw_data_absolute
-        end
-        @raw_data_relative = data_default
-        @aggregated_data = data_default
-      end
-    end
-
-    protected
-
-    def data_default
-      raise "must be implemented by the subclass"
-    end
-
-    def self.hook_level
-      raise "must be implemented by the subclass"
-    end
-
-    def raw_data_absolute
-      raise "must be implemented by the subclass"
-    end
-
-    def aggregate_data(aggregated_data, delta)
-      raise "must be implemented by the subclass"
-    end
-
-    def compute_raw_data_difference(first, last)
-      raise "must be implemented by the subclass"
-    end
-
-    private
-
-    def raw_data_relative
-      case @cache_state
-      when :wait
-        return @aggregated_data
-      when :hooked
-        new_start = raw_data_absolute
-        new_diff = compute_raw_data_difference(@start_raw_data, new_start)
-        @start_raw_data = new_start
-      when :done
-        @cache_state = :wait
-        new_diff = compute_raw_data_difference(@start_raw_data, 
-                                               @end_raw_data)
-      end
-
-      aggregate_data(@aggregated_data, new_diff)
-      @aggregated_data
-    end
-  end
-end

data/dirty_history/ruby/1.9.1/gems/dirty_history-0.2.0/dirty_history/ruby/1.9.1/gems/dirty_history-0.2.0/dirty_history/ruby/1.9.1/gems/rcov-0.9.9/lib/rcov/file_statistics.rb

@@ -1,355 +0,0 @@
-module Rcov
-  # A FileStatistics object associates a filename to:
-  # 1. its source code
-  # 2. the per-line coverage information after correction using rcov's heuristics
-  # 3. the per-line execution counts
-  #
-  # A FileStatistics object can be therefore be built given the filename, the
-  # associated source code, and an array holding execution counts (i.e. how many
-  # times each line has been executed).
-  #
-  # FileStatistics is relatively intelligent: it handles normal comments,
-  # <tt>=begin/=end</tt>, heredocs, many multiline-expressions... It uses a
-  # number of heuristics to determine what is code and what is a comment, and to
-  # refine the initial (incomplete) coverage information.
-  #
-  # Basic usage is as follows:
-  #  sf = FileStatistics.new("foo.rb", ["puts 1", "if true &&", "   false", 
-  #                                 "puts 2", "end"],  [1, 1, 0, 0, 0])
-  #  sf.num_lines        # => 5
-  #  sf.num_code_lines   # => 5
-  #  sf.coverage[2]      # => true
-  #  sf.coverage[3]      # => :inferred
-  #  sf.code_coverage    # => 0.6
-  #                    
-  # The array of strings representing the source code and the array of execution
-  # counts would normally be obtained from a Rcov::CodeCoverageAnalyzer.
-  class FileStatistics
-    attr_reader :name, :lines, :coverage, :counts
-    def initialize(name, lines, counts, comments_run_by_default = false)
-      @name = name
-      @lines = lines
-      initial_coverage = counts.map{|x| (x || 0) > 0 ? true : false }
-      @coverage = CoverageInfo.new initial_coverage
-      @counts = counts
-      @is_begin_comment = nil
-      # points to the line defining the heredoc identifier
-      # but only if it was marked (we don't care otherwise)
-      @heredoc_start = Array.new(lines.size, false)
-      @multiline_string_start = Array.new(lines.size, false)
-      extend_heredocs
-      find_multiline_strings
-      precompute_coverage comments_run_by_default
-    end
-
-    # Merge code coverage and execution count information.
-    # As for code coverage, a line will be considered
-    # * covered for sure (true) if it is covered in either +self+ or in the 
-    #   +coverage+ array
-    # * considered <tt>:inferred</tt> if the neither +self+ nor the +coverage+ array
-    #   indicate that it was definitely executed, but it was <tt>inferred</tt>
-    #   in either one 
-    # * not covered (<tt>false</tt>) if it was uncovered in both
-    #
-    # Execution counts are just summated on a per-line basis.
-    def merge(lines, coverage, counts)
-      coverage.each_with_index do |v, idx|
-        case @coverage[idx]
-        when :inferred 
-          @coverage[idx] = v || @coverage[idx]
-        when false 
-          @coverage[idx] ||= v
-        end
-      end
-      counts.each_with_index{|v, idx| @counts[idx] += v }
-      precompute_coverage false
-    end
-
-    # Total coverage rate if comments are also considered "executable", given as
-    # a fraction, i.e. from 0 to 1.0.
-    # A comment is attached to the code following it (RDoc-style): it will be
-    # considered executed if the the next statement was executed.
-    def total_coverage
-      return 0 if @coverage.size == 0
-      @coverage.inject(0.0) {|s,a| s + (a ? 1:0) } / @coverage.size
-    end
-
-    # Code coverage rate: fraction of lines of code executed, relative to the
-    # total amount of lines of code (loc). Returns a float from 0 to 1.0.
-    def code_coverage
-      indices = (0...@lines.size).select{|i| is_code? i }
-      return 0 if indices.size == 0
-      count = 0
-      indices.each {|i| count += 1 if @coverage[i] }
-      1.0 * count / indices.size
-    end
-
-    def code_coverage_for_report
-      code_coverage * 100
-    end
-
-    def total_coverage_for_report
-      total_coverage * 100
-    end
-
-    # Number of lines of code (loc).
-    def num_code_lines
-      (0...@lines.size).select{|i| is_code? i}.size
-    end
-
-    # Total number of lines.
-    def num_lines
-      @lines.size
-    end
-
-    # Returns true if the given line number corresponds to code, as opposed to a
-    # comment (either # or =begin/=end blocks).
-    def is_code?(lineno)
-      unless @is_begin_comment
-        @is_begin_comment = Array.new(@lines.size, false)
-        pending = []
-        state = :code
-        @lines.each_with_index do |line, index|
-          case state
-          when :code
-            if /^=begin\b/ =~ line
-              state = :comment
-              pending << index
-            end
-          when :comment
-            pending << index
-            if /^=end\b/ =~ line
-              state = :code
-              pending.each{|idx| @is_begin_comment[idx] = true}
-              pending.clear
-            end
-          end
-        end
-      end
-      @lines[lineno] && !@is_begin_comment[lineno] && @lines[lineno] !~ /^\s*(#|$)/ 
-    end
-
-    private
-
-    def find_multiline_strings
-      state = :awaiting_string
-      wanted_delimiter = nil
-      string_begin_line = 0
-      @lines.each_with_index do |line, i|
-        matching_delimiters = Hash.new{|h,k| k} 
-        matching_delimiters.update("{" => "}", "[" => "]", "(" => ")")
-        case state
-        when :awaiting_string
-          # very conservative, doesn't consider the last delimited string but
-          # only the very first one
-          if md = /^[^#]*%(?:[qQ])?(.)/.match(line)
-            if !/"%"/.match(line)
-              wanted_delimiter = /(?!\\).#{Regexp.escape(matching_delimiters[md[1]])}/
-              # check if closed on the very same line
-              # conservative again, we might have several quoted strings with the
-              # same delimiter on the same line, leaving the last one open
-              unless wanted_delimiter.match(md.post_match)
-                state = :want_end_delimiter
-                string_begin_line = i
-              end
-            end
-          end
-        when :want_end_delimiter
-          @multiline_string_start[i] = string_begin_line
-          if wanted_delimiter.match(line)
-            state = :awaiting_string
-          end
-        end
-      end
-    end
-    
-    def is_nocov?(line)
-      line =~ /#:nocov:/
-    end
-    
-    def mark_nocov_regions(nocov_line_numbers, coverage)
-      while nocov_line_numbers.size > 0
-        begin_line, end_line = nocov_line_numbers.shift, nocov_line_numbers.shift
-        next unless begin_line && end_line
-        (begin_line..end_line).each do |line_num|
-          coverage[line_num] ||= :inferred
-        end
-      end
-    end
-
-    def precompute_coverage(comments_run_by_default = true)
-      changed = false
-      lastidx = lines.size - 1
-      if (!is_code?(lastidx) || /^__END__$/ =~ @lines[-1]) && !@coverage[lastidx]
-        # mark the last block of comments
-        @coverage[lastidx] ||= :inferred
-        (lastidx-1).downto(0) do |i|
-          break if is_code?(i)
-          @coverage[i] ||= :inferred
-        end
-      end
-      nocov_line_numbers = []
-      
-      (0...lines.size).each do |i|
-        nocov_line_numbers << i if is_nocov?(@lines[i])
-
-        next if @coverage[i]
-        line = @lines[i]
-        if /^\s*(begin|ensure|else|case)\s*(?:#.*)?$/ =~ line && next_expr_marked?(i) or
-          /^\s*(?:end|\})\s*(?:#.*)?$/ =~ line && prev_expr_marked?(i) or
-          /^\s*(?:end\b|\})/ =~ line && prev_expr_marked?(i) && next_expr_marked?(i) or
-          /^\s*rescue\b/ =~ line && next_expr_marked?(i) or
-          /(do|\{)\s*(\|[^|]*\|\s*)?(?:#.*)?$/ =~ line && next_expr_marked?(i) or
-          prev_expr_continued?(i) && prev_expr_marked?(i) or
-          comments_run_by_default && !is_code?(i) or 
-          /^\s*((\)|\]|\})\s*)+(?:#.*)?$/ =~ line && prev_expr_marked?(i) or
-          prev_expr_continued?(i+1) && next_expr_marked?(i)
-          @coverage[i] ||= :inferred
-          changed = true
-        end
-        
-      end
-
-      mark_nocov_regions(nocov_line_numbers, @coverage)
-      
-      (@lines.size-1).downto(0) do |i|
-        next if @coverage[i]
-        if !is_code?(i) and @coverage[i+1] 
-          @coverage[i] = :inferred
-          changed = true
-        end
-      end
-
-      extend_heredocs if changed
-
-      # if there was any change, we have to recompute; we'll eventually
-      # reach a fixed point and stop there
-      precompute_coverage(comments_run_by_default) if changed
-    end
-
-    require 'strscan'
-    def extend_heredocs
-      i = 0
-      while i < @lines.size
-        unless is_code? i
-          i += 1
-          next
-        end
-        #FIXME: using a restrictive regexp so that only <<[A-Z_a-z]\w*
-        # matches when unquoted, so as to avoid problems with 1<<2
-        # (keep in mind that whereas puts <<2 is valid, puts 1<<2 is a
-        # parse error, but  a = 1<<2  is of course fine)
-        scanner = StringScanner.new(@lines[i])
-        j = k = i
-        loop do
-          scanned_text = scanner.search_full(/<<(-?)(?:(['"`])((?:(?!\2).)+)\2|([A-Z_a-z]\w*))/, true, true)
-          # k is the first line after the end delimiter for the last heredoc
-          # scanned so far
-          unless scanner.matched?
-            i = k
-            break
-          end
-          term = scanner[3] || scanner[4]
-          # try to ignore symbolic bitshifts like  1<<LSHIFT
-          ident_text = "<<#{scanner[1]}#{scanner[2]}#{term}#{scanner[2]}"
-          if scanned_text[/\d+\s*#{Regexp.escape(ident_text)}/]
-            # it was preceded by a number, ignore
-            i = k
-            break
-          end
-          must_mark = []
-          end_of_heredoc = (scanner[1] == "-") ? /^\s*#{Regexp.escape(term)}$/ : /^#{Regexp.escape(term)}$/
-          loop do
-            break if j == @lines.size
-            must_mark << j
-            if end_of_heredoc =~ @lines[j]
-              must_mark.each do |n|
-                @heredoc_start[n] = i
-              end
-              if (must_mark + [i]).any?{|lineidx| @coverage[lineidx]}
-                @coverage[i] ||= :inferred
-                must_mark.each{|lineidx| @coverage[lineidx] ||= :inferred}
-              end
-              # move the "first line after heredocs" index
-              if @lines[j+=1] =~ /^\s*\n$/
-                k = j
-              end
-              break
-            end
-            j += 1
-          end
-        end
-
-        i += 1
-      end
-    end
-
-    def next_expr_marked?(lineno)
-      return false if lineno >= @lines.size
-      found = false
-      idx = (lineno+1).upto(@lines.size-1) do |i|
-        next unless is_code? i
-        found = true
-        break i
-      end
-      return false unless found
-      @coverage[idx]
-    end
-
-    def prev_expr_marked?(lineno)
-      return false if lineno <= 0
-      found = false
-      idx = (lineno-1).downto(0) do |i|
-        next unless is_code? i
-        found = true
-        break i
-      end
-      return false unless found
-      @coverage[idx]
-    end
-
-    def prev_expr_continued?(lineno)
-      return false if lineno <= 0
-      return false if lineno >= @lines.size
-      found = false
-      if @multiline_string_start[lineno] && 
-        @multiline_string_start[lineno] < lineno
-        return true
-      end
-      # find index of previous code line
-      idx = (lineno-1).downto(0) do |i|
-        if @heredoc_start[i]
-          found = true
-          break @heredoc_start[i] 
-        end
-        next unless is_code? i
-        found = true
-        break i
-      end
-      return false unless found
-      #TODO: write a comprehensive list
-      if is_code?(lineno) && /^\s*((\)|\]|\})\s*)+(?:#.*)?$/.match(@lines[lineno])
-        return true
-      end
-      #FIXME: / matches regexps too
-      # the following regexp tries to reject #{interpolation}
-      r = /(,|\.|\+|-|\*|\/|<|>|%|&&|\|\||<<|\(|\[|\{|=|and|or|\\)\s*(?:#(?![{$@]).*)?$/.match @lines[idx]
-      # try to see if a multi-line expression with opening, closing delimiters
-      # started on that line
-      [%w!( )!].each do |opening_str, closing_str| 
-        # conservative: only consider nesting levels opened in that line, not
-        # previous ones too.
-        # next regexp considers interpolation too
-        line = @lines[idx].gsub(/#(?![{$@]).*$/, "")
-        opened = line.scan(/#{Regexp.escape(opening_str)}/).size
-        closed = line.scan(/#{Regexp.escape(closing_str)}/).size
-        return true if opened - closed > 0
-      end
-      if /(do|\{)\s*\|[^|]*\|\s*(?:#.*)?$/.match @lines[idx]
-        return false
-      end
-
-      r
-    end
-  end
-end