devise-tokens 1.0.3 → 1.0.4

data/test/dummy/config/environments/development.rb

@@ -0,0 +1,46 @@
+# frozen_string_literal: true
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = true
+
+  # use mailcatcher for development
+  config.action_mailer.default_url_options = { host: 'devise-token-auth.dev' }
+  config.action_mailer.delivery_method = :smtp
+  config.action_mailer.smtp_settings = { address: 'localhost', port: 1025 }
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+
+  OmniAuth.config.full_host = 'http://devise-token-auth.dev'
+end

data/test/dummy/config/environments/production.rb

@@ -0,0 +1,84 @@
+# frozen_string_literal: true
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable Rails's static asset server (Apache or nginx will already do this).
+  config.serve_static_files = false
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Generate digests for assets URLs.
+  config.assets.digest = true
+
+  # `config.assets.precompile` has moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Set to :debug to see everything in the log.
+  config.log_level = :info
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = "http://assets.example.com"
+
+  # Precompile additional assets.
+  # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+  # config.assets.precompile += %w( search.js )
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Disable automatic flushing of the log to improve performance.
+  # config.autoflush_log = false
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/test/dummy/config/environments/test.rb

@@ -0,0 +1,50 @@
+# frozen_string_literal: true
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static asset server for tests with Cache-Control for performance.
+  Rails::VERSION::MAJOR == 5 ?
+      (config.public_file_server.enabled = true) :
+      (config.serve_static_files  = true)
+
+  Rails::VERSION::MAJOR == 5 ?
+      (config.public_file_server.headers = { 'Cache-Control' => 'public, max-age=3600' }) :
+      (config.static_cache_control = 'public, max-age=3600')
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+  config.action_mailer.default_url_options = { host: 'localhost' }
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+
+  # randomize test order
+  config.active_support.test_order = :random
+end

data/test/dummy/config/initializers/assets.rb

@@ -0,0 +1,10 @@
+# frozen_string_literal: true
+
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/test/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,9 @@
+# frozen_string_literal: true
+
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/test/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,5 @@
+# frozen_string_literal: true
+
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/test/dummy/config/initializers/devise.rb

@@ -0,0 +1,290 @@
+# frozen_string_literal: true
+
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # The secret key used by Devise. Devise uses this key to generate
+  # random tokens. Changing this key will render invalid all existing
+  # confirmation, reset password and unlock tokens in the database.
+  # Devise will use the `secret_key_base` as its `secret_key`
+  # by default. You can change it below and use your own secret key.
+  # config.secret_key = '981f041712ce247008f46fec55e5d3e7fea904bd1601412a5810c74af3f1d9c33399bc34405b85a78dac04c9fb017270e691305b3ddb073f93578df124538e89'
+
+  # ==> Controller configuration
+  # Configure the parent class to the devise controllers.
+  # config.parent_controller = 'DeviseController'
+
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class
+  # with default "from" parameter.
+  config.mailer_sender = 'please-change-me-at-config-initializers-devise@example.com'
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = 'Devise::Mailer'
+
+  # Configure the parent class responsible to send e-mails.
+  # config.parent_mailer = 'ActionMailer::Base'
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require "devise/orm/#{DEVISE_TOKEN_AUTH_ORM}"
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  config.authentication_keys = [:email, :nickname]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [:email]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [:email]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:database]` will
+  # enable it only for database authentication. The supported strategies are:
+  # :database      = Support basic authentication with authentication key + password
+  # config.http_authenticatable = false
+
+  # If 401 status code should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. 'Application' by default.
+  # config.http_authentication_realm = 'Application'
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # particular strategies by setting this option.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing skip: :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # By default, Devise cleans up the CSRF token on authentication to
+  # avoid CSRF token fixation attacks. This means that, when using AJAX
+  # requests for sign in and sign up, you need to get a new CSRF token
+  # from the server. You can disable this option at your own risk.
+  # config.clean_up_csrf_token_on_authentication = true
+
+  # When false, Devise will not attempt to reload routes on eager load.
+  # This can reduce the time taken to boot the app but if your application
+  # requires the Devise mappings to be loaded during boot time the application
+  # won't boot properly.
+  # config.reload_routes = true
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 11. If
+  # using other algorithms, it sets how many times you want the password to be hashed.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments. Note that, for bcrypt (the default
+  # algorithm), the cost increases exponentially with the number of stretches (e.g.
+  # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation).
+  config.stretches = Rails.env.test? ? 1 : 11
+
+  # Set up a pepper to generate the hashed password.
+  # config.pepper = 'ced2d580bc6502ee4c7c70eb54499e72c04430932a791b1ec4694f7ebecafec05f487517c2f7337a4757e67bcc74fa957d23d89b1ea61cfb48a8ebe31c8dade1'
+
+  # Send a notification to the original email when the user's email is changed.
+  # config.send_email_changed_notification = false
+
+  # Send a notification email when the user's password is changed.
+  # config.send_password_change_notification = false
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming their account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming their account,
+  # access will be blocked just in the third day. Default is 0.days, meaning
+  # the user cannot access the website without confirming their account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # A period that the user is allowed to confirm their account before their
+  # token becomes invalid. For example, if set to 3.days, the user can confirm
+  # their account within 3 days after the mail was sent, but on the fourth day
+  # their account can't be confirmed with the token any more.
+  # Default is nil, meaning there is no restriction on how long a user can take
+  # before confirming their account.
+  # config.confirm_within = 3.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed, new email is stored in
+  # unconfirmed_email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [:email]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # Invalidates all the remember me tokens when the user signs out.
+  config.expire_all_remember_me_on_sign_out = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # secure: true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length.
+  config.password_length = 6..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  config.email_regexp = /\A[^@\s]+@[^@\s]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [:email]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # Warn on the last attempt before the account is locked.
+  # config.last_attempt_warning = true
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [:email]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # When set to false, does not sign a user in automatically after their password is
+  # reset. Defaults to true, so a user is signed in automatically after a reset.
+  # config.sign_in_after_reset_password = true
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another hashing or encryption algorithm besides bcrypt (default).
+  # You can use :sha1, :sha512 or algorithms from others authentication tools as
+  # :clearance_sha1, :authlogic_sha512 (then you should set stretches above to 20
+  # for default behavior) and :restful_authentication_sha1 (then you should set
+  # stretches to 10, and copy REST_AUTH_SITE_KEY to pepper).
+  #
+  # Require the `devise-encryptable` gem when using anything other than bcrypt
+  # config.encryptor = :sha512
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Set this configuration to false if you want /users/sign_out to sign out
+  # only the current scope. By default, Devise signs out all scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ['*/*', :html]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(scope: :user).unshift :some_external_strategy
+  # end
+
+  # ==> Mountable engine configurations
+  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
+  # is mountable, there are some extra configurations to be taken into account.
+  # The following options are available, assuming the engine is mounted as:
+  #
+  #     mount MyEngine, at: '/my_engine'
+  #
+  # The router that invoked `devise_for`, in the example above, would be:
+  # config.router_name = :my_engine
+  #
+  # When using OmniAuth, Devise cannot automatically set OmniAuth path,
+  # so you need to do it manually. For the users scope, it would be:
+  # config.omniauth_path_prefix = '/my_engine/users/auth'
+
+  # ==> Turbolinks configuration
+  # If your app is using Turbolinks, Turbolinks::Controller needs to be included to make redirection work correctly:
+  #
+  # ActiveSupport.on_load(:devise_failure_app) do
+  #   include Turbolinks::Controller
+  # end
+end