devise-authy 1.7.0 → 2.3.1

data/spec/rails-app/config/initializers/devise.rb

@@ -1,245 +0,0 @@
-# Use this hook to configure devise mailer, warden hooks and so forth.
-# Many of these configuration options can be set straight in your model.
-Devise.setup do |config|
-  # ==> Mailer Configuration
-  # Configure the e-mail address which will be shown in Devise::Mailer,
-  # note that it will be overwritten if you use your own mailer class with default "from" parameter.
-  config.mailer_sender = "please-change-me-at-config-initializers-devise@example.com"
-
-  # Configure the class responsible to send e-mails.
-  # config.mailer = "Devise::Mailer"
-
-  # ==> ORM configuration
-  # Load and configure the ORM. Supports :active_record (default) and
-  # :mongoid (bson_ext recommended) by default. Other ORMs may be
-  # available as additional gems.
-  require 'devise/orm/active_record'
-
-  # ==> Configuration for any authentication mechanism
-  # Configure which keys are used when authenticating a user. The default is
-  # just :email. You can configure it to use [:username, :subdomain], so for
-  # authenticating a user, both parameters are required. Remember that those
-  # parameters are used only when authenticating and not when retrieving from
-  # session. If you need permissions, you should implement that in a before filter.
-  # You can also supply a hash where the value is a boolean determining whether
-  # or not authentication should be aborted when the value is not present.
-  # config.authentication_keys = [ :email ]
-
-  # Configure parameters from the request object used for authentication. Each entry
-  # given should be a request method and it will automatically be passed to the
-  # find_for_authentication method and considered in your model lookup. For instance,
-  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
-  # The same considerations mentioned for authentication_keys also apply to request_keys.
-  # config.request_keys = []
-
-  # Configure which authentication keys should be case-insensitive.
-  # These keys will be downcased upon creating or modifying a user and when used
-  # to authenticate or find a user. Default is :email.
-  config.case_insensitive_keys = [ :email ]
-
-  # Configure which authentication keys should have whitespace stripped.
-  # These keys will have whitespace before and after removed upon creating or
-  # modifying a user and when used to authenticate or find a user. Default is :email.
-  config.strip_whitespace_keys = [ :email ]
-
-  # Tell if authentication through request.params is enabled. True by default.
-  # It can be set to an array that will enable params authentication only for the
-  # given strategies, for example, `config.params_authenticatable = [:database]` will
-  # enable it only for database (email + password) authentication.
-  # config.params_authenticatable = true
-
-  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
-  # It can be set to an array that will enable http authentication only for the
-  # given strategies, for example, `config.http_authenticatable = [:token]` will
-  # enable it only for token authentication.
-  # config.http_authenticatable = false
-
-  # If http headers should be returned for AJAX requests. True by default.
-  # config.http_authenticatable_on_xhr = true
-
-  # The realm used in Http Basic Authentication. "Application" by default.
-  # config.http_authentication_realm = "Application"
-
-  # It will change confirmation, password recovery and other workflows
-  # to behave the same regardless if the e-mail provided was right or wrong.
-  # Does not affect registerable.
-  # config.paranoid = true
-
-  # By default Devise will store the user in session. You can skip storage for
-  # :http_auth and :token_auth by adding those symbols to the array below.
-  # Notice that if you are skipping storage for all authentication paths, you
-  # may want to disable generating routes to Devise's sessions controller by
-  # passing :skip => :sessions to `devise_for` in your config/routes.rb
-  config.skip_session_storage = [:http_auth]
-
-  # ==> Configuration for :database_authenticatable
-  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
-  # using other encryptors, it sets how many times you want the password re-encrypted.
-  #
-  # Limiting the stretches to just one in testing will increase the performance of
-  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
-  # a value less than 10 in other environments.
-  config.stretches = Rails.env.test? ? 1 : 10
-
-  # Setup a pepper to generate the encrypted password.
-  # config.pepper = "1fb52305f8a163568d583979061df5b184b724114fb7f98a93e7b110346b80c4ab05380379f946ea2315f74f2d31cd5c75b36bd8a9866c8ce83fd5a36a5b9da6"
-
-  # ==> Configuration for :confirmable
-  # A period that the user is allowed to access the website even without
-  # confirming his account. For instance, if set to 2.days, the user will be
-  # able to access the website for two days without confirming his account,
-  # access will be blocked just in the third day. Default is 0.days, meaning
-  # the user cannot access the website without confirming his account.
-  # config.allow_unconfirmed_access_for = 2.days
-
-  # A period that the user is allowed to confirm their account before their
-  # token becomes invalid. For example, if set to 3.days, the user can confirm
-  # their account within 3 days after the mail was sent, but on the fourth day
-  # their account can't be confirmed with the token any more.
-  # Default is nil, meaning there is no restriction on how long a user can take
-  # before confirming their account.
-  # config.confirm_within = 3.days
-
-  # If true, requires any email changes to be confirmed (exactly the same way as
-  # initial account confirmation) to be applied. Requires additional unconfirmed_email
-  # db field (see migrations). Until confirmed new email is stored in
-  # unconfirmed email column, and copied to email column on successful confirmation.
-  config.reconfirmable = true
-
-  # Defines which key will be used when confirming an account
-  # config.confirmation_keys = [ :email ]
-
-  # ==> Configuration for :rememberable
-  # The time the user will be remembered without asking for credentials again.
-  # config.remember_for = 2.weeks
-
-  # If true, extends the user's remember period when remembered via cookie.
-  # config.extend_remember_period = false
-
-  # Options to be passed to the created cookie. For instance, you can set
-  # :secure => true in order to force SSL only cookies.
-  # config.rememberable_options = {}
-
-  # ==> Configuration for :validatable
-  # Range for password length. Default is 8..128.
-  config.password_length = 8..128
-
-  # Email regex used to validate email formats. It simply asserts that
-  # an one (and only one) @ exists in the given string. This is mainly
-  # to give user feedback and not to assert the e-mail validity.
-  # config.email_regexp = /\A[^@]+@[^@]+\z/
-
-  # ==> Configuration for :timeoutable
-  # The time you want to timeout the user session without activity. After this
-  # time the user will be asked for credentials again. Default is 30 minutes.
-  # config.timeout_in = 30.minutes
-
-  # If true, expires auth token on session timeout.
-  # config.expire_auth_token_on_timeout = false
-
-  # ==> Configuration for :lockable
-  # Defines which strategy will be used to lock an account.
-  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
-  # :none            = No lock strategy. You should handle locking by yourself.
-  config.lock_strategy = :failed_attempts
-
-  # Defines which key will be used when locking and unlocking an account
-  # config.unlock_keys = [ :email ]
-
-  # Defines which strategy will be used to unlock an account.
-  # :email = Sends an unlock link to the user email
-  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
-  # :both  = Enables both strategies
-  # :none  = No unlock strategy. You should handle unlocking by yourself.
-  config.unlock_strategy = :time
-
-  # Number of authentication tries before locking an account if lock_strategy
-  # is failed attempts.
-  config.maximum_attempts = 3
-
-  # Time interval to unlock the account if :time is enabled as unlock_strategy.
-  config.unlock_in = 1.hour
-
-  # ==> Configuration for :recoverable
-  #
-  # Defines which key will be used when recovering the password for an account
-  # config.reset_password_keys = [ :email ]
-
-  # Time interval you can reset your password with a reset password key.
-  # Don't put a too small interval or your users won't have the time to
-  # change their passwords.
-  config.reset_password_within = 6.hours
-
-  # ==> Configuration for :encryptable
-  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
-  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
-  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
-  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
-  # REST_AUTH_SITE_KEY to pepper)
-  # config.encryptor = :sha512
-
-  # ==> Configuration for :token_authenticatable
-  # Defines name of the authentication token params key
-  # config.token_authentication_key = :auth_token
-
-  # ==> Scopes configuration
-  # Turn scoped views on. Before rendering "sessions/new", it will first check for
-  # "users/sessions/new". It's turned off by default because it's slower if you
-  # are using only default views.
-  # config.scoped_views = false
-
-  # Configure the default scope given to Warden. By default it's the first
-  # devise role declared in your routes (usually :user).
-  # config.default_scope = :user
-
-  # Set this configuration to false if you want /users/sign_out to sign out
-  # only the current scope. By default, Devise signs out all scopes.
-  # config.sign_out_all_scopes = true
-
-  # ==> Navigation configuration
-  # Lists the formats that should be treated as navigational. Formats like
-  # :html, should redirect to the sign in page when the user does not have
-  # access, but formats like :xml or :json, should return 401.
-  #
-  # If you have any extra navigational formats, like :iphone or :mobile, you
-  # should add them to the navigational formats lists.
-  #
-  # The "*/*" below is required to match Internet Explorer requests.
-  # config.navigational_formats = ["*/*", :html]
-
-  # The default HTTP method used to sign out a resource. Default is :delete.
-  config.sign_out_via = :delete
-
-  # ==> OmniAuth
-  # Add a new OmniAuth provider. Check the wiki for more information on setting
-  # up on your models and hooks.
-  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
-
-  # ==> Warden configuration
-  # If you want to use other strategies, that are not supported by Devise, or
-  # change the failure app, you can configure them inside the config.warden block.
-  #
-  # config.warden do |manager|
-  #   manager.intercept_401 = false
-  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
-  # end
-
-  # ==> Mountable engine configurations
-  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
-  # is mountable, there are some extra configurations to be taken into account.
-  # The following options are available, assuming the engine is mounted as:
-  #
-  #     mount MyEngine, at: "/my_engine"
-  #
-  # The router that invoked `devise_for`, in the example above, would be:
-  # config.router_name = :my_engine
-  #
-  # When using omniauth, Devise cannot automatically set Omniauth path,
-  # so you need to do it manually. For the users scope, it would be:
-  # config.omniauth_path_prefix = "/my_engine/users/auth"
-
-  # ==> Devise Authy Authentication Extension
-  # How long should the user's device be remembered for.
-  # config.authy_remember_device = 1.month
-
-end

data/spec/rails-app/config/initializers/inflections.rb

@@ -1,15 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new inflection rules using the following format
-# (all these examples are active by default):
-# ActiveSupport::Inflector.inflections do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
-#   inflect.uncountable %w( fish sheep )
-# end
-#
-# These inflection rules are supported but not enabled by default:
-# ActiveSupport::Inflector.inflections do |inflect|
-#   inflect.acronym 'RESTful'
-# end

data/spec/rails-app/config/initializers/mime_types.rb

@@ -1,5 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf
-# Mime::Type.register_alias "text/html", :iphone

data/spec/rails-app/config/initializers/secret_token.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Your secret key for verifying the integrity of signed cookies.
-# If you change this key, all old signed cookies will become invalid!
-# Make sure the secret is at least 30 characters and all random,
-# no regular words or you'll be exposed to dictionary attacks.
-RailsApp::Application.config.secret_token = '338e169c5d170a06d8ecb2bcf494f683d69dc832c1b3f241ff2c3aca795806e03e7bf29a9a4be970fdd4502b5530a014e644d4ea96d5908e8b578596f740297e'

data/spec/rails-app/config/initializers/session_store.rb

@@ -1,8 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-RailsApp::Application.config.session_store :cookie_store, key: '_rails-app_session'
-
-# Use the database for sessions instead of the cookie-based default,
-# which shouldn't be used to store highly confidential information
-# (create the session table with "rails generate session_migration")
-# RailsApp::Application.config.session_store :active_record_store

data/spec/rails-app/config/initializers/wrap_parameters.rb

@@ -1,14 +0,0 @@
-# Be sure to restart your server when you modify this file.
-#
-# This file contains settings for ActionController::ParamsWrapper which
-# is enabled by default.
-
-# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
-ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json]
-end
-
-# Disable root element in JSON by default.
-ActiveSupport.on_load(:active_record) do
-  self.include_root_in_json = false
-end

data/spec/rails-app/config/locales/devise.authy.en.yml

@@ -1,24 +0,0 @@
-en:
-  devise:
-    submit_token: "Check Token"
-    submit_token_title: "Please enter your Authy token:"
-    authy_register_title: 'Enable Two factor authentication'
-    enable_authy: 'Enable'
-    cellphone: 'Enter your cellphone'
-    country: 'Enter your country'
-    request_sms: 'Request SMS'
-    request_phone_call: 'Request phone call'
-    remember_device: 'Remember Device'
-
-    authy_verify_installation_title: "Verify your account"
-    enable_my_account: 'Enable my account'
-
-    devise_authy:
-      user:
-        enabled: 'Two factor authentication was enabled'
-        not_enabled: 'Something went wrong while enabling two factor authentication'
-        disabled: 'Two factor authentication was disabled'
-        not_disabled: 'Something went wrong while disabling two factor authentication'
-        signed_in: 'Signed in with Authy successfully.'
-        already_enabled: "Two factor authentication is already enabled."
-        invalid_token: 'The entered token is invalid'

data/spec/rails-app/config/locales/devise.en.yml

@@ -1,59 +0,0 @@
-# Additional translations at https://github.com/plataformatec/devise/wiki/I18n
-
-en:
-  devise:
-    confirmations:
-      confirmed: "Your account was successfully confirmed. You are now signed in."
-      send_instructions: "You will receive an email with instructions about how to confirm your account in a few minutes."
-      send_paranoid_instructions: "If your email address exists in our database, you will receive an email with instructions about how to confirm your account in a few minutes."
-    failure:
-      already_authenticated: "You are already signed in."
-      inactive: "Your account was not activated yet."
-      invalid: "Invalid email or password."
-      invalid_token: "Invalid authentication token."
-      locked: "Your account is locked."
-      not_found_in_database: "Invalid email or password."
-      timeout: "Your session expired, please sign in again to continue."
-      unauthenticated: "You need to sign in or sign up before continuing."
-      unconfirmed: "You have to confirm your account before continuing."
-    mailer:
-      confirmation_instructions:
-        subject: "Confirmation instructions"
-      reset_password_instructions:
-        subject: "Reset password instructions"
-      unlock_instructions:
-        subject: "Unlock Instructions"
-    omniauth_callbacks:
-      failure: "Could not authenticate you from %{kind} because \"%{reason}\"."
-      success: "Successfully authenticated from %{kind} account."
-    passwords:
-      no_token: "You can't access this page without coming from a password reset email. If you do come from a password reset email, please make sure you used the full URL provided."
-      send_instructions: "You will receive an email with instructions about how to reset your password in a few minutes."
-      send_paranoid_instructions: "If your email address exists in our database, you will receive a password recovery link at your email address in a few minutes."
-      updated: "Your password was changed successfully. You are now signed in."
-      updated_not_active: "Your password was changed successfully."
-    registrations:
-      destroyed: "Bye! Your account was successfully cancelled. We hope to see you again soon."
-      signed_up: "Welcome! You have signed up successfully."
-      signed_up_but_inactive: "You have signed up successfully. However, we could not sign you in because your account is not yet activated."
-      signed_up_but_locked: "You have signed up successfully. However, we could not sign you in because your account is locked."
-      signed_up_but_unconfirmed: "A message with a confirmation link has been sent to your email address. Please open the link to activate your account."
-      update_needs_confirmation: "You updated your account successfully, but we need to verify your new email address. Please check your email and click on the confirm link to finalize confirming your new email address."
-      updated: "You updated your account successfully."
-    sessions:
-      signed_in: "Signed in successfully."
-      signed_out: "Signed out successfully."
-    unlocks:
-      send_instructions: "You will receive an email with instructions about how to unlock your account in a few minutes."
-      send_paranoid_instructions: "If your account exists, you will receive an email with instructions about how to unlock it in a few minutes."
-      unlocked: "Your account has been unlocked successfully. Please sign in to continue."
-  errors:
-    messages:
-      already_confirmed: "was already confirmed, please try signing in"
-      confirmation_period_expired: "needs to be confirmed within %{period}, please request a new one"
-      expired: "has expired, please request a new one"
-      not_found: "not found"
-      not_locked: "was not locked"
-      not_saved:
-        one: "1 error prohibited this %{resource} from being saved:"
-        other: "%{count} errors prohibited this %{resource} from being saved:"

data/spec/rails-app/config/locales/en.yml

@@ -1,5 +0,0 @@
-# Sample localization file for English. Add more files in this directory for other locales.
-# See https://github.com/svenfuchs/rails-i18n/tree/master/rails%2Flocale for starting points.
-
-en:
-  hello: "Hello world"

data/spec/rails-app/config/routes.rb

@@ -1,8 +0,0 @@
-RailsApp::Application.routes.draw do
-  get "welcome/index"
-
-  devise_for :users
-  devise_for :lockable_users, class: 'LockableUser' # for testing authy_lockable
-
-  root :to => 'welcome#index'
-end

data/spec/rails-app/config.ru

@@ -1,4 +0,0 @@
-# This file is used by Rack-based servers to start the application.
-
-require ::File.expand_path('../config/environment',  __FILE__)
-run RailsApp::Application

data/spec/rails-app/db/migrate/20130419164907_devise_create_users.rb

@@ -1,46 +0,0 @@
-class DeviseCreateUsers < ActiveRecord::Migration
-  def change
-    create_table(:users) do |t|
-      ## Database authenticatable
-      t.string :email,              :null => false, :default => ""
-      t.string :encrypted_password, :null => false, :default => ""
-
-      ## Recoverable
-      t.string   :reset_password_token
-      t.datetime :reset_password_sent_at
-
-      ## Rememberable
-      t.datetime :remember_created_at
-
-      ## Trackable
-      t.integer  :sign_in_count, :default => 0
-      t.datetime :current_sign_in_at
-      t.datetime :last_sign_in_at
-      t.string   :current_sign_in_ip
-      t.string   :last_sign_in_ip
-
-      ## Confirmable
-      # t.string   :confirmation_token
-      # t.datetime :confirmed_at
-      # t.datetime :confirmation_sent_at
-      # t.string   :unconfirmed_email # Only if using reconfirmable
-
-      ## Lockable
-      t.integer  :failed_attempts, :default => 0 # Only if lock strategy is :failed_attempts
-      t.string   :unlock_token # Only if unlock strategy is :email or :both
-      t.datetime :locked_at
-
-      ## Token authenticatable
-      # t.string :authentication_token
-
-
-      t.timestamps
-    end
-
-    add_index :users, :email,                :unique => true
-    add_index :users, :reset_password_token, :unique => true
-    # add_index :users, :confirmation_token,   :unique => true
-    # add_index :users, :unlock_token,         :unique => true
-    # add_index :users, :authentication_token, :unique => true
-  end
-end

data/spec/rails-app/db/migrate/20130419164936_devise_authy_add_to_users.rb

@@ -1,18 +0,0 @@
-class DeviseAuthyAddToUsers < ActiveRecord::Migration
-  def self.up
-    change_table :users do |t|
-      t.string    :authy_id
-      t.datetime  :last_sign_in_with_authy
-      t.boolean   :authy_enabled, :default => false
-    end
-
-    add_index :users, :authy_id
-  end
-
-  def self.down
-    change_table :users do |t|
-      t.remove :authy_id, :last_sign_in_with_authy, :authy_enabled
-    end
-  end
-end
-

data/spec/rails-app/db/schema.rb

@@ -1,41 +0,0 @@
-# encoding: UTF-8
-# This file is auto-generated from the current state of the database. Instead
-# of editing this file, please use the migrations feature of Active Record to
-# incrementally modify your database, and then regenerate this schema definition.
-#
-# Note that this schema.rb definition is the authoritative source for your
-# database schema. If you need to create the application database on another
-# system, you should be using db:schema:load, not running all the migrations
-# from scratch. The latter is a flawed and unsustainable approach (the more migrations
-# you'll amass, the slower it'll run and the greater likelihood for issues).
-#
-# It's strongly recommended to check this file into your version control system.
-
-ActiveRecord::Schema.define(:version => 20130419164936) do
-
-  create_table "users", :force => true do |t|
-    t.string   "email",                   :default => "",    :null => false
-    t.string   "encrypted_password",      :default => "",    :null => false
-    t.string   "reset_password_token"
-    t.datetime "reset_password_sent_at"
-    t.datetime "remember_created_at"
-    t.integer  "sign_in_count",           :default => 0
-    t.datetime "current_sign_in_at"
-    t.datetime "last_sign_in_at"
-    t.string   "current_sign_in_ip"
-    t.string   "last_sign_in_ip"
-    t.integer  "failed_attempts",         :default => 0
-    t.string   "unlock_token"
-    t.datetime "locked_at"
-    t.datetime "created_at",                                 :null => false
-    t.datetime "updated_at",                                 :null => false
-    t.string   "authy_id"
-    t.datetime "last_sign_in_with_authy"
-    t.boolean  "authy_enabled",           :default => false
-  end
-
-  add_index "users", ["authy_id"], :name => "index_users_on_authy_id"
-  add_index "users", ["email"], :name => "index_users_on_email", :unique => true
-  add_index "users", ["reset_password_token"], :name => "index_users_on_reset_password_token", :unique => true
-
-end

data/spec/rails-app/db/seeds.rb

@@ -1,7 +0,0 @@
-# This file should contain all the record creation needed to seed the database with its default values.
-# The data can then be loaded with the rake db:seed (or created alongside the db with db:setup).
-#
-# Examples:
-#
-#   cities = City.create([{ name: 'Chicago' }, { name: 'Copenhagen' }])
-#   Mayor.create(name: 'Emanuel', city: cities.first)

data/spec/rails-app/public/404.html

@@ -1,26 +0,0 @@
-<!DOCTYPE html>
-<html>
-<head>
-  <title>The page you were looking for doesn't exist (404)</title>
-  <style type="text/css">
-    body { background-color: #fff; color: #666; text-align: center; font-family: arial, sans-serif; }
-    div.dialog {
-      width: 25em;
-      padding: 0 4em;
-      margin: 4em auto 0 auto;
-      border: 1px solid #ccc;
-      border-right-color: #999;
-      border-bottom-color: #999;
-    }
-    h1 { font-size: 100%; color: #f00; line-height: 1.5em; }
-  </style>
-</head>
-
-<body>
-  <!-- This file lives in public/404.html -->
-  <div class="dialog">
-    <h1>The page you were looking for doesn't exist.</h1>
-    <p>You may have mistyped the address or the page may have moved.</p>
-  </div>
-</body>
-</html>

data/spec/rails-app/public/422.html

@@ -1,26 +0,0 @@
-<!DOCTYPE html>
-<html>
-<head>
-  <title>The change you wanted was rejected (422)</title>
-  <style type="text/css">
-    body { background-color: #fff; color: #666; text-align: center; font-family: arial, sans-serif; }
-    div.dialog {
-      width: 25em;
-      padding: 0 4em;
-      margin: 4em auto 0 auto;
-      border: 1px solid #ccc;
-      border-right-color: #999;
-      border-bottom-color: #999;
-    }
-    h1 { font-size: 100%; color: #f00; line-height: 1.5em; }
-  </style>
-</head>
-
-<body>
-  <!-- This file lives in public/422.html -->
-  <div class="dialog">
-    <h1>The change you wanted was rejected.</h1>
-    <p>Maybe you tried to change something you didn't have access to.</p>
-  </div>
-</body>
-</html>

data/spec/rails-app/public/500.html

@@ -1,25 +0,0 @@
-<!DOCTYPE html>
-<html>
-<head>
-  <title>We're sorry, but something went wrong (500)</title>
-  <style type="text/css">
-    body { background-color: #fff; color: #666; text-align: center; font-family: arial, sans-serif; }
-    div.dialog {
-      width: 25em;
-      padding: 0 4em;
-      margin: 4em auto 0 auto;
-      border: 1px solid #ccc;
-      border-right-color: #999;
-      border-bottom-color: #999;
-    }
-    h1 { font-size: 100%; color: #f00; line-height: 1.5em; }
-  </style>
-</head>
-
-<body>
-  <!-- This file lives in public/500.html -->
-  <div class="dialog">
-    <h1>We're sorry, but something went wrong.</h1>
-  </div>
-</body>
-</html>

data/spec/rails-app/public/robots.txt

@@ -1,5 +0,0 @@
-# See http://www.robotstxt.org/wc/norobots.html for documentation on how to use the robots.txt file
-#
-# To ban all spiders from the entire site uncomment the next two lines:
-# User-Agent: *
-# Disallow: /

data/spec/rails-app/script/rails

@@ -1,6 +0,0 @@
-#!/usr/bin/env ruby
-# This command will automatically be run when you run "rails" with Rails 3 gems installed from the root of your application.
-
-APP_PATH = File.expand_path('../../config/application',  __FILE__)
-require File.expand_path('../../config/boot',  __FILE__)
-require 'rails/commands'