deprec 1.9.3 → 2.0.0

data/lib/deprec/templates/xentools/40-setup-networking

@@ -0,0 +1,145 @@
+#!/bin/sh
+#
+#  This script sets up the /etc/network/interface file for the new
+# image.
+#
+# Steve
+# --
+# http://www.steve.org.uk/
+
+
+prefix=$1
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+#  Make sure we have an /etc/network directory.
+#
+mkdir -p ${prefix}/etc/network
+
+
+#
+#  A function to setup DHCP for our new image.
+#
+setupDynamicNetworking ()
+{
+    #
+    # The host is using DHCP.
+    #
+    cat <<E_O_DHCP > ${prefix}/etc/network/interfaces
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+auto eth0
+iface eth0 inet dhcp
+post-up ethtool -K eth0 tx off
+
+#
+# The commented out line above will disable TCP checksumming which
+# might resolve problems for some users.  It is disabled by default
+#
+E_O_DHCP
+}
+
+
+
+#
+#  A function to setup static IP addresses for our new image.
+#
+setupStaticNetworking ()
+{
+    #
+    # broadcast address?
+    #
+    bcast='';
+    if [ ! -z "${broadcast}" ]; then
+      bcast=" broadcast ${broadcast}"
+    fi
+
+    #
+    # We have a static IP address
+    #
+    cat <<E_O_STATIC >${prefix}/etc/network/interfaces
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+auto eth0
+iface eth0 inet static
+ address ${ip1}
+ gateway ${gateway}
+ netmask ${netmask}
+ ${bcast}
+ post-up  ethtool -K eth0 tx off
+
+#
+# The commented out line above will disable TCP checksumming which
+# might resolve problems for some users.  It is disabled by default
+#
+E_O_STATIC
+
+    interface=1
+    count=2
+
+    while [ "${count}" -le "${ip_count}" ]; do
+
+        value=\$ip${count}
+        value=`eval echo $value`
+
+        logMessage Adding etho:${interface}
+
+        cat <<E_O_STATIC >>${prefix}/etc/network/interfaces
+auto eth0:${interface}
+iface eth0:${interface} inet static
+ address ${value}
+ netmask ${netmask}
+ post-up  ethtool -K eth0 tx off
+E_O_STATIC
+        count=`expr $count + 1`
+        interface=`expr $interface + 1`
+    done
+}
+
+
+
+
+#
+#  Call the relevant function
+#
+if [ -z "${dhcp}" ]; then
+    logMessage "Setting up static networking"
+    setupStaticNetworking
+
+else
+    logMessage "Setting up DHCP networking"
+    setupDynamicNetworking
+fi
+
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished

data/lib/deprec/templates/xentools/xen-tools.conf.erb

@@ -0,0 +1,276 @@
+##
+#  /etc/xen-tools/xen-tools.conf
+##
+#
+#  This is the global configuration file for the scripts included
+# within the xen-tools package.
+#
+#  For more details please see:
+#
+#        http://xen-tools.org/
+#
+##
+
+
+##
+#
+# File Format
+# -----------
+#
+#  Anything following a '#' character is ignored as a comment.
+#
+#  Otherwise the format of this file "key = value".  The value of
+# any keys in this file may be constructed via the output of a command.
+#
+#  For example:
+#
+#         kernel = /boot/vmlinuz-`uname -r`
+#
+##
+
+
+
+#
+##
+#  Output directory for storing loopback images.
+#
+#  If you choose to use loopback images, which are simple to manage but
+# slower than LVM partitions, then specify a directory here and uncomment
+# the line.
+#
+#  New instances will be stored in subdirectories named after their
+# hostnames.
+# 
+##
+# dir = /home/xen
+#
+
+#
+##
+#
+# If you don't wish to use loopback images then you may specify an 
+# LVM volume group here instead
+#
+##
+lvm = xendisks
+
+
+#
+##
+#
+#  Installation method.
+#
+#  There are four distinct methods which you may to install a new copy
+# of Linux to use in your Xen guest domain:
+#
+#   - Installation via the debootstrap command.
+#   - Installation via the rpmstrap command.
+#   - Installation via the rinse command.
+#   - Installation by copying a directory containing a previous installation.
+#   - Installation by untarring a previously archived image.
+#
+#  NOTE That if you use the "untar", or "copy" options you should ensure
+# that the image you're left with matches the 'dist' setting later in
+# this file.
+#
+#
+##
+#
+# 
+# install-method = [ debootstrap | rinse | rpmstrap | copy | tar ]
+#
+#
+install-method = debootstrap
+
+#
+# If you're using the "copy", or "tar" installation methods you must
+# need to specify the source location to copy from, or the source
+# .tar file to unpack.
+#
+# You may specify that with a line such as:
+#
+# install-source = /path/to/copy
+# install-source = /some/path/img.tar
+#
+#
+
+#
+##
+#  Command definitions.
+##
+#
+# The "rinse", and "rpmstrap" commands are hardwired into 
+# the script, but if you wish to modify the commands which are executed
+# when installing new systems by a "copy", "debootstrap", or "tar" method
+# you can do so here:
+#
+# (This allows you to install from a .tar.bz file, rather than a plain
+# tar file, use cdebootstrap, etc.)
+#
+# install-method=copy:
+# copy-cmd = /bin/cp -a $src/* $dest
+#
+# install-method=debootstrap:
+# debootstrap-cmd=/usr/sbin/debootstrap
+#
+# install-method=tar:
+# tar-cmd  = /bin/tar --numeric-owner -xvf $src
+#
+#
+
+
+
+#
+##
+#  Disk and Sizing options.
+##
+#
+size   = 4Gb      # Disk image size.
+memory = 256Mb    # Memory size
+swap   = 512Mb    # Swap size
+# noswap = 1      # Don't use swap at all for the new system.
+fs     = ext3     # use the EXT3 filesystem for the disk image.
+dist   = hardy    # Default distribution to install.
+image  = sparse   # Specify sparse vs. full disk images.
+
+#
+#  Currently supported and tested distributions include:
+#
+# via Debootstrap:
+#
+#  Debian:
+#   sid, sarge, etch, lenny.
+#
+#  Ubuntu:
+#   edgy, feisty, dapper, gutsy, hardy.
+#
+# via Rinse:
+#   centos-4, centos-5.
+#   fedora-core-4, fedora-core-5, fedora-core-6, fedora-core-7
+#
+#
+
+
+
+##
+# Networking setup values.
+##
+
+#
+# Uncomment and adjust these network settings if you wish to give your
+# new instances static IP addresses.
+#
+gateway   = 192.168.1.1
+netmask   = 255.255.255.0
+broadcast = 192.168.1.255
+#
+# Uncomment this if you wish the images to use DHCP
+#
+# dhcp = 1
+
+
+##
+# Misc options
+##
+
+#
+# Uncomment the following line if you wish to disable the caching
+# of downloaded .deb files when using debootstrap to install images.
+#
+# cache = no
+#
+
+#
+# Uncomment the following line if you wish to interactively setup
+# a new root password for images.
+#
+# passwd = 1
+
+#
+# If you'd like all accounts on your host system which are not present
+# on the guest system to be copied over then uncomment the following line.
+#
+# accounts = 1
+#
+
+#
+# Default kernel and ramdisk to use for the virtual servers
+#
+kernel      = /boot/vmlinuz-`uname -r`
+initrd      = /boot/initrd.img-`uname -r`
+
+#
+#  The architecture to use when using debootstrap, rinse, or rpmstrap.
+#
+#  This is most useful on 64 bit host machines, for other systems it
+# doesn't need to be used.
+#
+# arch=[i386|amd64]
+#
+
+#
+# The default mirror for debootstrap to install Debian-derived distributions
+#
+mirror = http://ftp.us.debian.org/debian/
+
+#
+# A mirror suitable for use when installing the Dapper release of Ubuntu.
+#
+mirror = http://archive.ubuntu.com/ubuntu/
+
+#
+#  If you like you could use per-distribution mirrors, which will
+# be more useful if you're working in an environment where you want
+# to regularly use multiple distributions:
+#
+# mirror_sid=http://ftp.us.debian.org/debian
+# mirror_sarge=http://ftp.us.debian.org/debian
+# mirror_etch=http://ftp.us.debian.org/debian
+# mirror_dapper=http://archive.ubuntu.com/ubuntu
+# mirror_edgy=http://archive.ubuntu.com/ubuntu
+# mirror_feisty=http://archive.ubuntu.com/ubuntu
+# mirror_gutsy=http://archive.ubuntu.com/ubuntu
+
+
+#
+#  Filesystem options for the different filesystems we support.
+#
+ext3_options   = noatime,nodiratime,errors=remount-ro
+ext2_options   = noatime,nodiratime,errors=remount-ro
+xfs_options    = defaults
+reiser_options = defaults
+
+#
+#  Uncomment if you wish newly created images to boot once they've been
+# created.
+#
+# boot = 1
+
+
+#
+#  If you're using the lenny or later version of the Xen guest kernel you will
+# need to make sure that you use 'hvc0' for the guest serial device,
+# and 'xvdX' instead of 'sdX' for serial devices.
+#
+#  You may specify the things to use here:
+#
+# serial_device = hvc0 #default
+# serial_device = tty1
+#
+# disk_device = xvda #default
+# disk_device = sda
+#
+
+
+#
+#  Here we specify the output directory which the Xen configuration
+# files will be written to, and the suffix to give them.
+#
+#  Historically xen-tools have created configuration files in /etc/xen,
+# and given each file the name $hostname.cfg.  If you want to change
+# that behaviour you may do so here.
+#
+#
+# output    = /etc/xen
+# extension = .cfg
+#

data/lib/deprec/templates/xentools/xm.tmpl.erb

@@ -0,0 +1,138 @@
+#
+# Configuration file for the Xen instance {$hostname}, created
+# by xen-tools {$xen_tools_version} on { scalar localtime }.
+#
+
+#
+#  Kernel + memory size
+#
+{ if ( ( $kernel ) && ( !defined($pygrub)) )
+  {
+    $OUT.= "kernel      = '$kernel'";
+  }
+}
+{ if ( ( $initrd ) && ( !defined($pygrub)) )
+  {
+    $OUT.= "ramdisk     = '$initrd'";
+  }
+}
+{
+  if ( $pygrub )
+  {
+    $OUT .= "bootloader = '/usr/bin/pygrub'\n";
+  }
+}
+memory      = '{$memory}'
+
+#
+#  Disk device(s).
+#
+{
+  if ( !defined($image_vbd ) )
+  {
+    for ( my $i = $#PARTITIONS; $i >= 0 ; $i-- )
+    {
+      if ( $PARTITIONS[$i]{'mountpoint'} eq '/' )
+      {
+          $OUT .= "root        = '/dev/$device" . ($i + 1) . " ro'\n";
+      }
+    }
+    $OUT .= "disk        = [\n";
+    for ( my $i = $#PARTITIONS; $i >= 0 ; $i-- )
+    {
+      $OUT .= "                  '$PARTITIONS[$i]{'imagetype'}$PARTITIONS[$i]{'image'},$device" . ( $i + 1 ) .",w',\n";
+    }
+    $OUT .= "              ]\n";
+  }
+}
+
+#
+#  Physical volumes
+#
+{
+    if ( ( $swap_vbd ) && ( $image_vbd ) )
+    {
+    $OUT .= "root  = '/dev/$device" . "2 ro'\n";
+
+    $OUT .= "disk  = [ ";
+
+    if ( $image_vbd )
+    {
+         $OUT .= "'$image_vbd," . $device . "2,w'";
+
+    }
+
+    if ( $swap_vbd )
+    {
+         if ( $image_vbd )
+         {
+            $OUT .= ",";
+         }
+
+         $OUT .= "'$swap_vbd," . $device . "1,w'";
+    }
+    $OUT .= " ]\n";
+    }
+}
+
+
+#
+#  Hostname
+#
+name        = '{$hostname}'
+
+#
+#  Networking
+#
+{ if ( $dhcp )
+  {
+    $OUT .= "dhcp        = 'dhcp'\n";
+
+    # Setup the mac address, if present.
+    my $m = '';
+    if ( $mac )
+    {
+      $m = "mac=$mac"
+    }
+
+    $OUT .= "vif         = [ '$m' ]";
+  }
+  else
+  {
+    #
+    # Setup the mac address, if present.
+    #
+    my $m = '';
+    if ( $mac )
+    {
+      $m = ",mac=$mac"
+    }
+
+    my $vn = '';
+    if ( $vifname )
+    {
+      $vn = ",vifname=$vifname";
+    }
+
+    $OUT .= "vif         = [ 'ip=$ip1";
+    $OUT .= "$m";
+    $OUT .= "$vn";
+    $OUT .= "' ]";
+  }
+}
+
+#
+#  Behaviour
+#
+on_poweroff = 'destroy'
+on_reboot   = 'restart'
+on_crash    = 'restart'
+
+
+{ if ( $admins )
+  {
+    $OUT .= "xen_shell = '$admins'\n";
+  }
+}
+
+extra = ' TERM=xterm xencons=tty console=tty1'