dependabot-composer 0.107.27 → 0.107.28

data/helpers/vendor/composer/composer/doc/04-schema.md

@@ -0,0 +1,924 @@
+# The composer.json Schema
+
+This chapter will explain all of the fields available in `composer.json`.
+
+## JSON schema
+
+We have a [JSON schema](http://json-schema.org) that documents the format and
+can also be used to validate your `composer.json`. In fact, it is used by the
+`validate` command. You can find it at: https://getcomposer.org/schema.json
+
+## Root Package
+
+The root package is the package defined by the `composer.json` at the root of
+your project. It is the main `composer.json` that defines your project
+requirements.
+
+Certain fields only apply when in the root package context. One example of
+this is the `config` field. Only the root package can define configuration.
+The config of dependencies is ignored. This makes the `config` field
+`root-only`.
+
+> **Note:** A package can be the root package or not, depending on the context.
+> For example, if your project depends on the `monolog` library, your project
+> is the root package. However, if you clone `monolog` from GitHub in order to
+> fix a bug in it, then `monolog` is the root package.
+
+## Properties
+
+### name
+
+The name of the package. It consists of vendor name and project name,
+separated by `/`. Examples:
+
+* monolog/monolog
+* igorw/event-source
+
+The name can contain any character, including white spaces, and it's case
+insensitive (`foo/bar` and `Foo/Bar` are considered the same package). In order
+to simplify its installation, it's recommended to define a short and lowercase
+name that doesn't include non-alphanumeric characters or white spaces.
+
+Required for published packages (libraries).
+
+### description
+
+A short description of the package. Usually this is one line long.
+
+Required for published packages (libraries).
+
+### version
+
+The version of the package. In most cases this is not required and should
+be omitted (see below).
+
+This must follow the format of `X.Y.Z` or `vX.Y.Z` with an optional suffix
+of `-dev`, `-patch` (`-p`), `-alpha` (`-a`), `-beta` (`-b`) or `-RC`.
+The patch, alpha, beta and RC suffixes can also be followed by a number.
+
+Examples:
+
+- 1.0.0
+- 1.0.2
+- 1.1.0
+- 0.2.5
+- 1.0.0-dev
+- 1.0.0-alpha3
+- 1.0.0-beta2
+- 1.0.0-RC5
+- v2.0.4-p1
+
+Optional if the package repository can infer the version from somewhere, such
+as the VCS tag name in the VCS repository. In that case it is also recommended
+to omit it.
+
+> **Note:** Packagist uses VCS repositories, so the statement above is very
+> much true for Packagist as well. Specifying the version yourself will
+> most likely end up creating problems at some point due to human error.
+
+### type
+
+The type of the package. It defaults to `library`.
+
+Package types are used for custom installation logic. If you have a package
+that needs some special logic, you can define a custom type. This could be a
+`symfony-bundle`, a `wordpress-plugin` or a `typo3-cms-extension`. These types
+will all be specific to certain projects, and they will need to provide an
+installer capable of installing packages of that type.
+
+Out of the box, Composer supports four types:
+
+- **library:** This is the default. It will simply copy the files to `vendor`.
+- **project:** This denotes a project rather than a library. For example
+  application shells like the [Symfony standard edition](https://github.com/symfony/symfony-standard),
+  CMSs like the [SilverStripe installer](https://github.com/silverstripe/silverstripe-installer)
+  or full fledged applications distributed as packages. This can for example
+  be used by IDEs to provide listings of projects to initialize when creating
+  a new workspace.
+- **metapackage:** An empty package that contains requirements and will trigger
+  their installation, but contains no files and will not write anything to the
+  filesystem. As such, it does not require a dist or source key to be
+  installable.
+- **composer-plugin:** A package of type `composer-plugin` may provide an
+  installer for other packages that have a custom type. Read more in the
+  [dedicated article](articles/custom-installers.md).
+
+Only use a custom type if you need custom logic during installation. It is
+recommended to omit this field and have it default to `library`.
+
+### keywords
+
+An array of keywords that the package is related to. These can be used for
+searching and filtering.
+
+Examples:
+
+- logging
+- events
+- database
+- redis
+- templating
+
+Optional.
+
+### homepage
+
+An URL to the website of the project.
+
+Optional.
+
+### readme
+
+A relative path to the readme document.
+
+Optional.
+
+### time
+
+Release date of the version.
+
+Must be in `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS` format.
+
+Optional.
+
+### license
+
+The license of the package. This can be either a string or an array of strings.
+
+The recommended notation for the most common licenses is (alphabetical):
+
+- Apache-2.0
+- BSD-2-Clause
+- BSD-3-Clause
+- BSD-4-Clause
+- GPL-2.0-only / GPL-2.0-or-later
+- GPL-3.0-only / GPL-3.0-or-later
+- LGPL-2.1-only / LGPL-2.1-or-later
+- LGPL-3.0-only / LGPL-3.0-or-later
+- MIT
+
+Optional, but it is highly recommended to supply this. More identifiers are
+listed at the [SPDX Open Source License Registry](https://spdx.org/licenses/).
+
+For closed-source software, you may use `"proprietary"` as the license identifier.
+
+An Example:
+
+```json
+{
+    "license": "MIT"
+}
+```
+
+For a package, when there is a choice between licenses ("disjunctive license"),
+multiple can be specified as array.
+
+An Example for disjunctive licenses:
+
+```json
+{
+    "license": [
+       "LGPL-2.1-only",
+       "GPL-3.0-or-later"
+    ]
+}
+```
+
+Alternatively they can be separated with "or" and enclosed in parenthesis;
+
+```json
+{
+    "license": "(LGPL-2.1-only or GPL-3.0-or-later)"
+}
+```
+
+Similarly when multiple licenses need to be applied ("conjunctive license"),
+they should be separated with "and" and enclosed in parenthesis.
+
+### authors
+
+The authors of the package. This is an array of objects.
+
+Each author object can have following properties:
+
+* **name:** The author's name. Usually their real name.
+* **email:** The author's email address.
+* **homepage:** An URL to the author's website.
+* **role:** The author's role in the project (e.g. developer or translator)
+
+An example:
+
+```json
+{
+    "authors": [
+        {
+            "name": "Nils Adermann",
+            "email": "naderman@naderman.de",
+            "homepage": "http://www.naderman.de",
+            "role": "Developer"
+        },
+        {
+            "name": "Jordi Boggiano",
+            "email": "j.boggiano@seld.be",
+            "homepage": "https://seld.be",
+            "role": "Developer"
+        }
+    ]
+}
+```
+
+Optional, but highly recommended.
+
+### support
+
+Various information to get support about the project.
+
+Support information includes the following:
+
+* **email:** Email address for support.
+* **issues:** URL to the issue tracker.
+* **forum:** URL to the forum.
+* **wiki:** URL to the wiki.
+* **irc:** IRC channel for support, as irc://server/channel.
+* **source:** URL to browse or download the sources.
+* **docs:** URL to the documentation.
+* **rss:** URL to the RSS feed.
+* **chat:** URL to the chat channel.
+
+An example:
+
+```json
+{
+    "support": {
+        "email": "support@example.org",
+        "irc": "irc://irc.freenode.org/composer"
+    }
+}
+```
+
+Optional.
+
+### Package links
+
+All of the following take an object which maps package names to
+versions of the package via version constraints. Read more about
+versions [here](articles/versions.md).
+
+Example:
+
+```json
+{
+    "require": {
+        "monolog/monolog": "1.0.*"
+    }
+}
+```
+
+All links are optional fields.
+
+`require` and `require-dev` additionally support stability flags ([root-only](04-schema.md#root-package)).
+These allow you to further restrict or expand the stability of a package beyond
+the scope of the [minimum-stability](#minimum-stability) setting. You can apply
+them to a constraint, or apply them to an empty constraint if you want to
+allow unstable packages of a dependency for example.
+
+Example:
+
+```json
+{
+    "require": {
+        "monolog/monolog": "1.0.*@beta",
+        "acme/foo": "@dev"
+    }
+}
+```
+
+If one of your dependencies has a dependency on an unstable package you need to
+explicitly require it as well, along with its sufficient stability flag.
+
+Example:
+
+Assuming `doctrine/doctrine-fixtures-bundle` requires `"doctrine/data-fixtures": "dev-master"`
+then inside the root composer.json you need to add the second line below to allow dev
+releases for the `doctrine/data-fixtures` package :
+
+```json
+{
+    "require": {
+        "doctrine/doctrine-fixtures-bundle": "dev-master",
+        "doctrine/data-fixtures": "@dev"
+    }
+}
+```
+
+`require` and `require-dev` additionally support explicit references (i.e.
+commit) for dev versions to make sure they are locked to a given state, even
+when you run update. These only work if you explicitly require a dev version
+and append the reference with `#<ref>`. This is also a
+[root-only](04-schema.md#root-package) feature and will be ignored in
+dependencies.
+
+Example:
+
+```json
+{
+    "require": {
+        "monolog/monolog": "dev-master#2eb0c0978d290a1c45346a1955188929cb4e5db7",
+        "acme/foo": "1.0.x-dev#abc123"
+    }
+}
+```
+
+> **Note:** This feature has severe technical limitations, as the
+> composer.json metadata will still be read from the branch name you specify
+> before the hash. You should therefore only use this as a temporary solution
+> during development to remediate transient issues, until you can switch to
+> tagged releases. The Composer team does not actively support this feature
+> and will not accept bug reports related to it.
+
+It is also possible to inline-alias a package constraint so that it matches
+a constraint that it otherwise would not. For more information [see the
+aliases article](articles/aliases.md).
+
+`require` and `require-dev` also support references to specific PHP versions
+and PHP extensions your project needs to run successfully.
+
+Example:
+
+```json
+{
+    "require" : {
+        "php" : "^5.5 || ^7.0",
+        "ext-mbstring": "*"
+    }
+}
+```
+
+> **Note:** It is important to list PHP extensions your project requires.
+> Not all PHP installations are created equal: some may miss extensions you
+> may consider as standard (such as `ext-mysqli` which is not installed by
+> default in Fedora/CentOS minimal installation systems). Failure to list
+> required PHP extensions may lead to a bad user experience: Composer will
+> install your package without any errors but it will then fail at run-time.
+> The `composer show --platform` command lists all PHP extensions available on
+> your system. You may use it to help you compile the list of extensions you
+> use and require. Alternatively you may use third party tools to analyze
+> your project for the list of extensions used.
+
+#### require
+
+Lists packages required by this package. The package will not be installed
+unless those requirements can be met.
+
+#### require-dev <span>([root-only](04-schema.md#root-package))</span>
+
+Lists packages required for developing this package, or running
+tests, etc. The dev requirements of the root package are installed by default.
+Both `install` or `update` support the `--no-dev` option that prevents dev
+dependencies from being installed.
+
+#### conflict
+
+Lists packages that conflict with this version of this package. They
+will not be allowed to be installed together with your package.
+
+Note that when specifying ranges like `<1.0 >=1.1` in a `conflict` link,
+this will state a conflict with all versions that are less than 1.0 *and* equal
+or newer than 1.1 at the same time, which is probably not what you want. You
+probably want to go for `<1.0 || >=1.1` in this case.
+
+#### replace
+
+Lists packages that are replaced by this package. This allows you to fork a
+package, publish it under a different name with its own version numbers, while
+packages requiring the original package continue to work with your fork because
+it replaces the original package.
+
+This is also useful for packages that contain sub-packages, for example the main
+symfony/symfony package contains all the Symfony Components which are also
+available as individual packages. If you require the main package it will
+automatically fulfill any requirement of one of the individual components,
+since it replaces them.
+
+Caution is advised when using replace for the sub-package purpose explained
+above. You should then typically only replace using `self.version` as a version
+constraint, to make sure the main package only replaces the sub-packages of
+that exact version, and not any other version, which would be incorrect.
+
+#### provide
+
+List of other packages that are provided by this package. This is mostly
+useful for common interfaces. A package could depend on some virtual
+`logger` package, any library that implements this logger interface would
+simply list it in `provide`.
+
+#### suggest
+
+Suggested packages that can enhance or work well with this package. These are
+informational and are displayed after the package is installed, to give
+your users a hint that they could add more packages, even though they are not
+strictly required.
+
+The format is like package links above, except that the values are free text
+and not version constraints.
+
+Example:
+
+```json
+{
+    "suggest": {
+        "monolog/monolog": "Allows more advanced logging of the application flow",
+        "ext-xml": "Needed to support XML format in class Foo"
+    }
+}
+```
+
+### autoload
+
+Autoload mapping for a PHP autoloader.
+
+[`PSR-4`](http://www.php-fig.org/psr/psr-4/) and [`PSR-0`](http://www.php-fig.org/psr/psr-0/)
+autoloading, `classmap` generation and `files` includes are supported.
+
+PSR-4 is the recommended way since it offers greater ease of use (no need
+to regenerate the autoloader when you add classes).
+
+#### PSR-4
+
+Under the `psr-4` key you define a mapping from namespaces to paths, relative to the
+package root. When autoloading a class like `Foo\\Bar\\Baz` a namespace prefix
+`Foo\\` pointing to a directory `src/` means that the autoloader will look for a
+file named `src/Bar/Baz.php` and include it if present. Note that as opposed to
+the older PSR-0 style, the prefix (`Foo\\`) is **not** present in the file path.
+
+Namespace prefixes must end in `\\` to avoid conflicts between similar prefixes.
+For example `Foo` would match classes in the `FooBar` namespace so the trailing
+backslashes solve the problem: `Foo\\` and `FooBar\\` are distinct.
+
+The PSR-4 references are all combined, during install/update, into a single
+key => value array which may be found in the generated file
+`vendor/composer/autoload_psr4.php`.
+
+Example:
+
+```json
+{
+    "autoload": {
+        "psr-4": {
+            "Monolog\\": "src/",
+            "Vendor\\Namespace\\": ""
+        }
+    }
+}
+```
+
+If you need to search for a same prefix in multiple directories,
+you can specify them as an array as such:
+
+```json
+{
+    "autoload": {
+        "psr-4": { "Monolog\\": ["src/", "lib/"] }
+    }
+}
+```
+
+If you want to have a fallback directory where any namespace will be looked for,
+you can use an empty prefix like:
+
+```json
+{
+    "autoload": {
+        "psr-4": { "": "src/" }
+    }
+}
+```
+
+#### PSR-0
+
+Under the `psr-0` key you define a mapping from namespaces to paths, relative to the
+package root. Note that this also supports the PEAR-style non-namespaced convention.
+
+Please note namespace declarations should end in `\\` to make sure the autoloader
+responds exactly. For example `Foo` would match in `FooBar` so the trailing
+backslashes solve the problem: `Foo\\` and `FooBar\\` are distinct.
+
+The PSR-0 references are all combined, during install/update, into a single key => value
+array which may be found in the generated file `vendor/composer/autoload_namespaces.php`.
+
+Example:
+
+```json
+{
+    "autoload": {
+        "psr-0": {
+            "Monolog\\": "src/",
+            "Vendor\\Namespace\\": "src/",
+            "Vendor_Namespace_": "src/"
+        }
+    }
+}
+```
+
+If you need to search for a same prefix in multiple directories,
+you can specify them as an array as such:
+
+```json
+{
+    "autoload": {
+        "psr-0": { "Monolog\\": ["src/", "lib/"] }
+    }
+}
+```
+
+The PSR-0 style is not limited to namespace declarations only but may be
+specified right down to the class level. This can be useful for libraries with
+only one class in the global namespace. If the php source file is also located
+in the root of the package, for example, it may be declared like this:
+
+```json
+{
+    "autoload": {
+        "psr-0": { "UniqueGlobalClass": "" }
+    }
+}
+```
+
+If you want to have a fallback directory where any namespace can be, you can
+use an empty prefix like:
+
+```json
+{
+    "autoload": {
+        "psr-0": { "": "src/" }
+    }
+}
+```
+
+#### Classmap
+
+The `classmap` references are all combined, during install/update, into a single
+key => value array which may be found in the generated file
+`vendor/composer/autoload_classmap.php`. This map is built by scanning for
+classes in all `.php` and `.inc` files in the given directories/files.
+
+You can use the classmap generation support to define autoloading for all libraries
+that do not follow PSR-0/4. To configure this you specify all directories or files
+to search for classes.
+
+Example:
+
+```json
+{
+    "autoload": {
+        "classmap": ["src/", "lib/", "Something.php"]
+    }
+}
+```
+
+#### Files
+
+If you want to require certain files explicitly on every request then you can use
+the `files` autoloading mechanism. This is useful if your package includes PHP functions
+that cannot be autoloaded by PHP.
+
+Example:
+
+```json
+{
+    "autoload": {
+        "files": ["src/MyLibrary/functions.php"]
+    }
+}
+```
+
+#### Exclude files from classmaps
+
+If you want to exclude some files or folders from the classmap you can use the `exclude-from-classmap` property.
+This might be useful to exclude test classes in your live environment, for example, as those will be skipped
+from the classmap even when building an optimized autoloader.
+
+The classmap generator will ignore all files in the paths configured here. The paths are absolute from the package
+root directory (i.e. composer.json location), and support `*` to match anything but a slash, and `**` to
+match anything. `**` is implicitly added to the end of the paths.
+
+Example:
+
+```json
+{
+    "autoload": {
+        "exclude-from-classmap": ["/Tests/", "/test/", "/tests/"]
+    }
+}
+```
+
+#### Optimizing the autoloader
+
+The autoloader can have quite a substantial impact on your request time
+(50-100ms per request in large frameworks using a lot of classes). See the
+[article about optimizing the autoloader](articles/autoloader-optimization.md)
+for more details on how to reduce this impact.
+
+### autoload-dev <span>([root-only](04-schema.md#root-package))</span>
+
+This section allows to define autoload rules for development purposes.
+
+Classes needed to run the test suite should not be included in the main autoload
+rules to avoid polluting the autoloader in production and when other people use
+your package as a dependency.
+
+Therefore, it is a good idea to rely on a dedicated path for your unit tests
+and to add it within the autoload-dev section.
+
+Example:
+
+```json
+{
+    "autoload": {
+        "psr-4": { "MyLibrary\\": "src/" }
+    },
+    "autoload-dev": {
+        "psr-4": { "MyLibrary\\Tests\\": "tests/" }
+    }
+}
+```
+
+### include-path
+
+> **DEPRECATED**: This is only present to support legacy projects, and all new code
+> should preferably use autoloading. As such it is a deprecated practice, but the
+> feature itself will not likely disappear from Composer.
+
+A list of paths which should get appended to PHP's `include_path`.
+
+Example:
+
+```json
+{
+    "include-path": ["lib/"]
+}
+```
+
+Optional.
+
+### target-dir
+
+> **DEPRECATED**: This is only present to support legacy PSR-0 style autoloading,
+> and all new code should preferably use PSR-4 without target-dir and projects
+> using PSR-0 with PHP namespaces are encouraged to migrate to PSR-4 instead.
+
+Defines the installation target.
+
+In case the package root is below the namespace declaration you cannot
+autoload properly. `target-dir` solves this problem.
+
+An example is Symfony. There are individual packages for the components. The
+Yaml component is under `Symfony\Component\Yaml`. The package root is that
+`Yaml` directory. To make autoloading possible, we need to make sure that it
+is not installed into `vendor/symfony/yaml`, but instead into
+`vendor/symfony/yaml/Symfony/Component/Yaml`, so that the autoloader can load
+it from `vendor/symfony/yaml`.
+
+To do that, `autoload` and `target-dir` are defined as follows:
+
+```json
+{
+    "autoload": {
+        "psr-0": { "Symfony\\Component\\Yaml\\": "" }
+    },
+    "target-dir": "Symfony/Component/Yaml"
+}
+```
+
+Optional.
+
+### minimum-stability <span>([root-only](04-schema.md#root-package))</span>
+
+This defines the default behavior for filtering packages by stability. This
+defaults to `stable`, so if you rely on a `dev` package, you should specify
+it in your file to avoid surprises.
+
+All versions of each package are checked for stability, and those that are less
+stable than the `minimum-stability` setting will be ignored when resolving
+your project dependencies. (Note that you can also specify stability requirements
+on a per-package basis using stability flags in the version constraints that you
+specify in a `require` block (see [package links](#package-links) for more details).
+
+Available options (in order of stability) are `dev`, `alpha`, `beta`, `RC`,
+and `stable`.
+
+### prefer-stable <span>([root-only](04-schema.md#root-package))</span>
+
+When this is enabled, Composer will prefer more stable packages over unstable
+ones when finding compatible stable packages is possible. If you require a
+dev version or only alphas are available for a package, those will still be
+selected granted that the minimum-stability allows for it.
+
+Use `"prefer-stable": true` to enable.
+
+### repositories <span>([root-only](04-schema.md#root-package))</span>
+
+Custom package repositories to use.
+
+By default Composer only uses the packagist repository. By specifying
+repositories you can get packages from elsewhere.
+
+Repositories are not resolved recursively. You can only add them to your main
+`composer.json`. Repository declarations of dependencies' `composer.json`s are
+ignored.
+
+The following repository types are supported:
+
+* **composer:** A Composer repository is simply a `packages.json` file served
+  via the network (HTTP, FTP, SSH), that contains a list of `composer.json`
+  objects with additional `dist` and/or `source` information. The `packages.json`
+  file is loaded using a PHP stream. You can set extra options on that stream
+  using the `options` parameter.
+* **vcs:** The version control system repository can fetch packages from git,
+  svn, fossil and hg repositories.
+* **pear:** With this you can import any pear repository into your Composer
+  project.
+* **package:** If you depend on a project that does not have any support for
+  composer whatsoever you can define the package inline using a `package`
+  repository. You basically inline the `composer.json` object.
+
+For more information on any of these, see [Repositories](05-repositories.md).
+
+Example:
+
+```json
+{
+    "repositories": [
+        {
+            "type": "composer",
+            "url": "http://packages.example.com"
+        },
+        {
+            "type": "composer",
+            "url": "https://packages.example.com",
+            "options": {
+                "ssl": {
+                    "verify_peer": "true"
+                }
+            }
+        },
+        {
+            "type": "vcs",
+            "url": "https://github.com/Seldaek/monolog"
+        },
+        {
+            "type": "pear",
+            "url": "https://pear2.php.net"
+        },
+        {
+            "type": "package",
+            "package": {
+                "name": "smarty/smarty",
+                "version": "3.1.7",
+                "dist": {
+                    "url": "https://www.smarty.net/files/Smarty-3.1.7.zip",
+                    "type": "zip"
+                },
+                "source": {
+                    "url": "https://smarty-php.googlecode.com/svn/",
+                    "type": "svn",
+                    "reference": "tags/Smarty_3_1_7/distribution/"
+                }
+            }
+        }
+    ]
+}
+```
+
+> **Note:** Order is significant here. When looking for a package, Composer
+will look from the first to the last repository, and pick the first match.
+By default Packagist is added last which means that custom repositories can
+override packages from it.
+
+Using JSON object notation is also possible. However, JSON key/value pairs
+are to be considered unordered so consistent behaviour cannot be guaranteed.
+
+ ```json
+{
+    "repositories": {
+         "foo": {
+             "type": "composer",
+             "url": "http://packages.foo.com"
+         }
+    }
+}
+ ```
+
+### config <span>([root-only](04-schema.md#root-package))</span>
+
+A set of configuration options. It is only used for projects. See
+[Config](06-config.md) for a description of each individual option.
+
+### scripts <span>([root-only](04-schema.md#root-package))</span>
+
+Composer allows you to hook into various parts of the installation process
+through the use of scripts.
+
+See [Scripts](articles/scripts.md) for events details and examples.
+
+### extra
+
+Arbitrary extra data for consumption by `scripts`.
+
+This can be virtually anything. To access it from within a script event
+handler, you can do:
+
+```php
+$extra = $event->getComposer()->getPackage()->getExtra();
+```
+
+Optional.
+
+### bin
+
+A set of files that should be treated as binaries and symlinked into the `bin-dir`
+(from config).
+
+See [Vendor Binaries](articles/vendor-binaries.md) for more details.
+
+Optional.
+
+### archive
+
+A set of options for creating package archives.
+
+The following options are supported:
+
+* **exclude:** Allows configuring a list of patterns for excluded paths. The
+  pattern syntax matches .gitignore files. A leading exclamation mark (!) will
+  result in any matching files to be included even if a previous pattern
+  excluded them. A leading slash will only match at the beginning of the project
+  relative path. An asterisk will not expand to a directory separator.
+
+Example:
+
+```json
+{
+    "archive": {
+        "exclude": ["/foo/bar", "baz", "/*.test", "!/foo/bar/baz"]
+    }
+}
+```
+
+The example will include `/dir/foo/bar/file`, `/foo/bar/baz`, `/file.php`,
+`/foo/my.test` but it will exclude `/foo/bar/any`, `/foo/baz`, and `/my.test`.
+
+Optional.
+
+### abandoned
+
+Indicates whether this package has been abandoned.
+
+It can be boolean or a package name/URL pointing to a recommended alternative.
+
+Examples:
+
+Use `"abandoned": true` to indicates this package is abandoned.
+Use `"abandoned": "monolog/monolog"` to indicates this package is abandoned and the
+recommended alternative is  `monolog/monolog`.
+
+Defaults to false.
+
+Optional.
+
+### non-feature-branches
+
+A list of regex patterns of branch names that are non-numeric (e.g. "latest" or something),
+that will NOT be handled as feature branches. This is an array of strings.
+
+If you have non-numeric branch names, for example like "latest", "current", "latest-stable"
+or something, that do not look like a version number, then Composer handles such branches
+as feature branches. This means it searches for parent branches, that look like a version
+or ends at special branches (like master) and the root package version number becomes the
+version of the parent branch or at least master or something.
+
+To handle non-numeric named branches as versions instead of searching for a parent branch
+with a valid version or special branch name like master, you can set patterns for branch
+names, that should be handled as dev version branches.
+
+This is really helpful when you have dependencies using "self.version", so that not dev-master,
+but the same branch is installed (in the example: latest-testing).
+
+An example:
+
+If you have a testing branch, that is heavily maintained during a testing phase and is
+deployed to your staging environment, normally `composer show -s` will give you `versions : * dev-master`.
+
+If you configure `latest-.*` as a pattern for non-feature-branches like this:
+
+```json
+{
+    "non-feature-branches": ["latest-.*"]
+}
+```
+
+Then `composer show -s` will give you `versions : * dev-latest-testing`.
+
+Optional.
+
+&larr; [Command-line interface](03-cli.md)  |  [Repositories](05-repositories.md) &rarr;