denko 0.13.1 → 0.13.3

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA256:
-  metadata.gz: a8f92242ec380e61b3b9d8729c8268cd0384196a982b3546deea690449e1b969
-  data.tar.gz: f706c61a73d4ad2ea7ebc531454c79b1e45368f303b484189b8bf749d4845d52
+  metadata.gz: '082654ef6ccaec931c9cba643db7c528cc8b20d33e969af6a101a735078b7c02'
+  data.tar.gz: 780397a81acfa1a44591deb0c1beedb6f39071b606fb108914c79af334e47847
 SHA512:
-  metadata.gz: f8d870fb998fe4694b6e18b3570f5caaaf965f4e54f8b6af609b6cdf27acae5be47482454b0c818bf3bd58e0d18d3548e8c18573bef3aef91054655c5120c411
-  data.tar.gz: 7d44fa1875dc2c023d4cbc664a5f8960bcaac9b3f32c44b41c366e9d9d8570f1d6d39850584be502c18e010c2d5d69aa2c786b85d504bb7bfda9064d0ba2c8a0
+  metadata.gz: 58e7ec2753368aa202a63792c6f142bd150a386c95d37605ee4c1985022d4c06e552108f504675c599effcde0e0438b7d1029d0c700ec7fee40fffdffc60d1f4
+  data.tar.gz: fec058bef713c8f5c7e84eed3dd87a84db93267e921abb27d3c4966b40bf66a223a3a76442559742bec04a58665e18d3d8d30cd3954fdb846148e5d1fb3b0cd2

data/.github/workflows/build_avr.yml

@@ -33,9 +33,8 @@ jobs:
               - name: arduino:avr
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: IRremote
-                version: 4.0.0
+                version: 4.1.2
               - name: Ethernet
               - name: WiFi
               - name: Adafruit NeoPixel
@@ -51,11 +50,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_esp32.yml

@@ -33,7 +33,7 @@ jobs:
                 source-url: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
             libraries: |
               - name: IRremoteESP8266
-                version: 2.8.4
+                version: 2.8.5
               - name: ESP32Servo
               - name: Adafruit NeoPixel
               
@@ -48,11 +48,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_esp8266.yml

@@ -33,7 +33,7 @@ jobs:
                 source-url: https://arduino.esp8266.com/stable/package_esp8266com_index.json
             libraries: |
               - name: IRremoteESP8266
-                version: 2.8.4
+                version: 2.8.5
               - name: Adafruit NeoPixel
 
     steps:
@@ -47,11 +47,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_megaavr.yml

@@ -33,11 +33,10 @@ jobs:
               - name: arduino:megaavr
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: IRremote
-                version: 4.0.0
+                version: 4.1.2
               - name: Ethernet
-              - name: WiFi
+              - name: WiFiNINA
               - name: Adafruit NeoPixel
                 
     steps:
@@ -51,11 +50,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_ra4m1.yml

@@ -0,0 +1,57 @@
+name: Build / RA4M1
+
+on:
+  workflow_dispatch:
+  
+  pull_request:
+    paths:
+      - 'src/**'
+      - '.github/workflows/build_ra4m1.yml'
+
+  push:
+    paths:
+      - 'src/**'
+      - '.github/workflows/build_ra4m1.yml'
+      
+jobs:
+  samd-zero:
+    name: samd ${{ matrix.sketches.name }}
+    
+    runs-on: ubuntu-latest
+    
+    strategy:
+      matrix:
+        sketches:
+          - name: serial
+          - name: ethernet
+          - name: wifi
+            
+        board:
+          - fqbn: arduino:renesas_uno:minima
+            denko-target: ra4m1
+            platforms: |
+              - name: arduino:renesas_uno
+            libraries: |
+              - name: Servo
+              - name: Ethernet
+              - name: WiFi
+              - name: Adafruit NeoPixel
+                
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+      
+      - name: Generate
+        id: generate
+        run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
+
+      - name: Compile Arduino Sketches
+        uses: arduino/compile-sketches@v1.1.0
+        with:
+          platforms: ${{ matrix.board.platforms }}
+          fqbn: ${{ matrix.board.fqbn }}
+          libraries: ${{ matrix.board.libraries }}
+          sketch-paths: |
+            - ${{ steps.generate.outputs.path }}

data/.github/workflows/build_rp2040.yml

@@ -34,9 +34,8 @@ jobs:
                 source-url: https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: IRremote
-                version: 4.0.0
+                version: 4.1.2
               - name: Ethernet
               - name: WiFi
                 
@@ -51,11 +50,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_sam3x.yml

@@ -33,7 +33,6 @@ jobs:
               - name: arduino:sam
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: Ethernet
               - name: WiFi
               - name: Adafruit NeoPixel
@@ -49,11 +48,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_samd.yml

@@ -33,9 +33,8 @@ jobs:
               - name: arduino:samd
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: IRremote
-                version: 4.0.0
+                version: 4.1.2
               - name: Ethernet
               - name: WiFi
               - name: Adafruit NeoPixel
@@ -51,11 +50,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/CHANGELOG.md

@@ -1,5 +1,105 @@
 # Changelog
 
+## 0.13.3
+
+### Board Updates / Fixes
+
+- Arduino UNO R4 Minima & Wi-Fi (`--target ra4m1`):
+  - RA4M1 fully tested
+  - Only IR-remote and WS2812 libraries not working. Disabled temporarily.
+
+- Arduino Nano Every
+  - ATmega4809 fully tested and issues fixed
+  - Works similarly to the regular AVR chips
+
+- SAMD21
+  - Changed serial acknowledgement threshold to 128 instead of 64. More stable, but might be slightly slower performing.
+
+### Network Chip Updates / Fixes
+
+- WINC1500
+  - Added support for WiFi101 library
+  - Tested on Arduino MKR 1000
+
+- NINA-W102
+  - Added conditions to select the WiFiNINA library on appropriate hardware.
+  - Untested in hardware
+
+### API Changes
+
+- Default aux message size is now  784 bytes (768 + 16) instead of (512 + 16)
+
+### Component Changes
+
+- WS2812
+  - Larger aux message size now allows up to 256 pixels (3 bytes per pixel) on a strip
+  
+### Bug Fixes
+
+- Fixed a bug with WS2812 strips where it would try to memcpy 3x the number of necessary bytes. Fixed this by just sending the total number of bytes to write to the strip, rather than number of pixels * bytes per pxiel.
+- The `val` variable in Arduino is now 16-bit instead of 8-bit.
+- Fixed instances where `Minitest` was referred to as `MiniTest`, causing tests to fail.
+
+## 0.13.2
+
+### New Boards
+
+- Arduino UNO R4 Minima & Wi-Fi (`--target ra4m1`):
+  - Mostly working
+  - IR-remote and WS2812 libraries do not support this chip. Disabled temporarily.
+  - Hardware serial disabled until further testing.
+  - Wi-Fi still untested.
+
+### New Components
+
+- ADS1115 Analog-to-Digital Converter:
+  - Class: `Denko::AnalogIO::ADS1115`.
+  - Connects via I2C bus. Driver written in Ruby.
+  - Can be used directly by calling `ADS1115#read` with the 2 config register bytes.
+  - `#read` automatically waits for conversion before reading result.
+  - Implements `BoardProxy` interface, so `AnalogIO::Input` can use it in place of `Board`.
+  - For each `AnalogIO::Input` subcomponent:
+    - Negative pin (1 or 3) of differential pair can be set with the keyword argument `negative_pin:`
+    - Gain can be set with the keyword argument `gain:`
+    - Sample rate can be set with the keyword argument `sample_rate:`
+    - Sample rate doesn't affect update rate. Higher sample rates oversample for a single reading, increasing resolution.
+    - `ADS1115` sets `@volts_per_bit` in the subcomponent, so exact voltages can be calculated.
+    - There is no listening interface for subcomponents.
+  - Built in comparator not implemented.
+  - Basically an I2C version of ADS1118 with the temperature sensor swapped for comparator.
+
+### Optimizations
+
+- Boards now declare their serial RX buffer size and maximum I2C transaction size in handshake. This makes it possible to send data as fast as possible without data loss.
+- Added `benchmarks` folder and a simple SSD1306 screen redrawing benchmark, with results for many chips.
+- Changed many instance methods to use keyword args instead of options hash pattern. Better performance everywhere, but will matter most in mruby.
+- Many small performance improvemnts taken from mruby implementation to keep code as similar as possible across both.
+
+### Minor Changes
+
+- Improved detection of default serial interface and EEPROM availability at the sketch level.
+- Pins defined as any of `:SDA0, :SCL0, :MISO0, :MOSI0, :SCK0, :SS0` in a loaded board map are automatically copied to the key without the trailing 0, i.e. `:SDA` and so forth. This is convenient for chips like the RP2040 which don't define the "non-zero" pins at all.
+- Simplified handling of Wi-Fi reconnection in that sketch.
+- Wi-Fi sketch now prints its connection details to serial on each reconnect, as well as startup.
+- Updated both IR libraries to latest version.
+
+### Bug Fixes
+
+- Display::HD44780 was trying to write 1 and 0 as String instead of Integer to digital output pins.
+- Wi-Fi and Ethernet sketches could get stuck in an endless loop when switching between a TCP client and the Serial interface fallback.
+- SAMD21 could hang on I2C when writing lots of data. This has to do with its serial buffer not being saturated somehow? Fixed though.
+- Board#set_register_divider wouldn't raise the correct ArgumentError if the divider given was out of range.
+- Updated the arduino-yaml-board-maps project to prevent ESP32 chips from wrongly map many of their ADC pins.
+- ESP32 variants, other than the original V1, could try to assign more LEDC (PWM) channels than they actually have.
+
+### Removed
+
+- Removed the `:pad` option from Message::pack. Nothing was using it and padding bytes should be handled in the component class anyway.
+
+## 0.13.1
+
+Fixes critical 1-Wire bugs introduced when namespace was reorganized for 0.13.0.
+
 ## 0.13.0
 
 ### New Features

data/DEPS_CLI.md

@@ -14,13 +14,16 @@ arduino-cli core update-index
 arduino-cli core install arduino:megaavr
 arduino-cli core install arduino:sam
 arduino-cli core install arduino:samd
+arduino-cli core install arduino:renesas_uno
 arduino-cli core install esp8266:esp8266
 arduino-cli core install esp32:esp32
 arduino-cli core install rp2040:rp2040
 arduino-cli lib install Servo
 arduino-cli lib install Ethernet
 arduino-cli lib install WiFi
-arduino-cli lib install IRremote@4.0.0
+arduino-cli lib install WiFi101
+arduino-cli lib install WiFiNINA
+arduino-cli lib install IRremote@4.1.2
 arduino-cli lib install IRremoteESP8266@2.8.4
 arduino-cli lib install ESP32Servo
 arduino-cli lib install "Adafruit NeoPixel"
@@ -33,7 +36,8 @@ arduino-cli core install arduino:megaavr
 arduino-cli lib install Servo
 arduino-cli lib install Ethernet
 arduino-cli lib install WiFi
-arduino-cli lib install IRremote@4.0.0
+arduino-cli lib install WiFiNINA
+arduino-cli lib install IRremote@4.1.2
 arduino-cli lib install "Adafruit NeoPixel"
 ````
 
@@ -42,10 +46,13 @@ arduino-cli lib install "Adafruit NeoPixel"
 arduino-cli core update-index
 arduino-cli core install arduino:sam
 arduino-cli core install arduino:samd
+arduino-cli core install arduino:renesas_uno
 arduino-cli lib install Servo
 arduino-cli lib install Ethernet
 arduino-cli lib install WiFi
-arduino-cli lib install IRremote@4.0.0
+arduino-cli lib install WiFi101
+arduino-cli lib install WiFiNINA
+arduino-cli lib install IRremote@4.1.2
 arduino-cli lib install "Adafruit NeoPixel"
 ````
 
@@ -55,7 +62,7 @@ arduino-cli config init
 arduino-cli config add board_manager.additional_urls https://arduino.esp8266.com/stable/package_esp8266com_index.json
 arduino-cli core update-index
 arduino-cli core install esp8266:esp8266
-arduino-cli lib install IRremoteESP8266@2.8.4
+arduino-cli lib install IRremoteESP8266@2.8.5
 arduino-cli lib install "Adafruit NeoPixel"
 ````
 
@@ -66,7 +73,7 @@ arduino-cli config add board_manager.additional_urls https://raw.githubuserconte
 arduino-cli core update-index
 arduino-cli core install esp32:esp32
 arduino-cli lib install ESP32Servo
-arduino-cli lib install IRremoteESP8266@2.8.4
+arduino-cli lib install IRremoteESP8266@2.8.5
 arduino-cli lib install "Adafruit NeoPixel"
 ````
 
@@ -76,5 +83,5 @@ arduino-cli config init
 arduino-cli config add board_manager.additional_urls https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json
 arduino-cli core update-index
 arduino-cli core install rp2040:rp2040
-arduino-cli lib install IRremote@4.0.0
+arduino-cli lib install IRremote@4.1.2
 ````

data/DEPS_IDE.md

@@ -31,6 +31,7 @@ All platforms will require libraries to be installed. To install a library do th
     Arduino megaAVR Boards
     Arduino SAM Boards (32-bits ARM Cortex-M3)
     Arduino SAMD Boards (32-bits ARM Cortex-M0+)
+    Arduino UNO R4 Boards
     ESP8266 Boards
     ESP32 Boards    
     ````    
@@ -39,8 +40,10 @@ All platforms will require libraries to be installed. To install a library do th
     Servo                      by Michael Margolis, Arduino
     Ethernet                   by Various
     WiFi                       by Arduino
-    IRremote         @ v4.0.0  by shirriff, z3to, ArminJo
-    IRremoteESP82666 @ v2.8.4  by David Conran, Sebastien Warin
+    WiFi101                    by Arduino
+    WiFiNINA                   by Arduino
+    IRremote         @ v4.1.2  by shirriff, z3to, ArminJo
+    IRremoteESP82666 @ v2.8.5  by David Conran, Sebastien Warin
     ESP32Servo                 by Kevin Harrington, John K. Bennett
     Adafruit NeoPixel          by Adafruit
     ````
@@ -55,7 +58,8 @@ All platforms will require libraries to be installed. To install a library do th
     Servo                      by Michael Margolis, Arduino
     Ethernet                   by Various
     WiFi                       by Arduino
-    IRremote         @ v4.0.0  by shirriff, z3to, ArminJo
+    WiFiNINA                   by Arduino
+    IRremote         @ v4.1.2  by shirriff, z3to, ArminJo
     Adafruit NeoPixel          by Adafruit
     ````
     
@@ -64,13 +68,16 @@ All platforms will require libraries to be installed. To install a library do th
     ````
     Arduino SAM Boards (32-bits ARM Cortex-M3)
     Arduino SAMD Boards (32-bits ARM Cortex-M0+)
+    Arduino UNO R4 Boards
     ````    
   * Libraries:
     ````
     Servo                      by Michael Margolis, Arduino
     Ethernet                   by Various
     WiFi                       by Arduino
-    IRremote         @ v4.0.0  by shirriff, z3to, ArminJo
+    WiFi101                    by Arduino
+    WiFiNINA                   by Arduino
+    IRremote         @ v4.1.2  by shirriff, z3to, ArminJo
     Adafruit NeoPixel          by Adafruit
     ````
 
@@ -85,7 +92,7 @@ All platforms will require libraries to be installed. To install a library do th
     ````    
   * Libraries:
     ````
-    IRremoteESP82666 @ v2.8.4  by David Conran, Sebastien Warin
+    IRremoteESP82666 @ v2.8.5  by David Conran, Sebastien Warin
     Adafruit NeoPixel          by Adafruit
     ````
 
@@ -100,7 +107,7 @@ All platforms will require libraries to be installed. To install a library do th
     ````    
   * Libraries (latest version unless specified):
     ````
-    IRremoteESP82666 @ v2.8.4  by David Conran, Sebastien Warin
+    IRremoteESP82666 @ v2.8.5  by David Conran, Sebastien Warin
     ESP32Servo                 by Kevin Harrington, John K. Bennett
     Adafruit NeoPixel          by Adafruit
     ````
@@ -116,5 +123,5 @@ All platforms will require libraries to be installed. To install a library do th
     ````    
   * Libraries:
     ````
-    IRremote         @ v4.0.0  by shirriff, z3to, ArminJo
+    IRremote         @ v4.1.2  by shirriff, z3to, ArminJo
     ````