delayed-web 0.4.1 → 0.4.2

data/spec/dummy/config/environments/development.rb

@@ -1,4 +1,4 @@
-Dummy::Application.configure do
+Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
   # In the development environment your application's code is reloaded on
@@ -9,21 +9,46 @@ Dummy::Application.configure do
   # Do not eager load code on boot.
   config.eager_load = false
 
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable/disable caching. By default caching is disabled.
+  if Rails.root.join('tmp/caching-dev.txt').exist?
+    config.action_controller.perform_caching = true
+
+    config.cache_store = :memory_store
+    config.public_file_server.headers = {
+      'Cache-Control' => 'public, max-age=172800'
+    }
+  else
+    config.action_controller.perform_caching = false
+
+    config.cache_store = :null_store
+  end
 
   # Don't care if the mailer can't send.
   config.action_mailer.raise_delivery_errors = false
 
+  config.action_mailer.perform_caching = false
+
   # Print deprecation notices to the Rails logger.
   config.active_support.deprecation = :log
 
-  # Raise an error on page load if there are pending migrations
+  # Raise an error on page load if there are pending migrations.
   config.active_record.migration_error = :page_load
 
   # Debug mode disables concatenation and preprocessing of assets.
   # This option may cause significant delays in view rendering with a large
   # number of complex assets.
   config.assets.debug = true
+
+  # Suppress logger output for asset requests.
+  config.assets.quiet = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+
+  # Use an evented file watcher to asynchronously detect changes in source code,
+  # routes, locales, etc. This feature depends on the listen gem.
+  config.file_watcher = ActiveSupport::EventedFileUpdateChecker
 end

data/spec/dummy/config/environments/production.rb

@@ -1,11 +1,11 @@
-Dummy::Application.configure do
+Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
   # Code is not reloaded between requests.
   config.cache_classes = true
 
   # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both thread web servers
+  # your application in memory, allowing both threaded web servers
   # and those relying on copy on write to perform better.
   # Rake tasks automatically ignore this option for performance.
   config.eager_load = true
@@ -14,13 +14,9 @@ Dummy::Application.configure do
   config.consider_all_requests_local       = false
   config.action_controller.perform_caching = true
 
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable Rails's static asset server (Apache or nginx will already do this).
-  config.serve_static_assets = false
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
 
   # Compress JavaScripts and CSS.
   config.assets.js_compressor = :uglifier
@@ -29,52 +25,62 @@ Dummy::Application.configure do
   # Do not fallback to assets pipeline if a precompiled asset is missed.
   config.assets.compile = false
 
-  # Generate digests for assets URLs.
-  config.assets.digest = true
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
 
-  # Version of your assets, change this if you want to expire all your assets.
-  config.assets.version = '1.0'
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
 
   # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Mount Action Cable outside main process or domain
+  # config.action_cable.mount_path = nil
+  # config.action_cable.url = 'wss://example.com/cable'
+  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
 
   # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
   # config.force_ssl = true
 
-  # Set to :debug to see everything in the log.
-  config.log_level = :info
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
 
   # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+  config.log_tags = [ :request_id ]
 
   # Use a different cache store in production.
   # config.cache_store = :mem_cache_store
 
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = "http://assets.example.com"
-
-  # Precompile additional assets.
-  # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-  # config.assets.precompile += %w( search.js )
+  # Use a real queuing backend for Active Job (and separate queues per environment)
+  # config.active_job.queue_adapter     = :resque
+  # config.active_job.queue_name_prefix = "dummy_#{Rails.env}"
+  config.action_mailer.perform_caching = false
 
   # Ignore bad email addresses and do not raise email delivery errors.
   # Set this to true and configure the email server for immediate delivery to raise delivery errors.
   # config.action_mailer.raise_delivery_errors = false
 
   # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation can not be found).
+  # the I18n.default_locale when a translation cannot be found).
   config.i18n.fallbacks = true
 
   # Send deprecation notices to registered listeners.
   config.active_support.deprecation = :notify
 
-  # Disable automatic flushing of the log to improve performance.
-  # config.autoflush_log = false
-
   # Use default logging formatter so that PID and timestamp are not suppressed.
   config.log_formatter = ::Logger::Formatter.new
+
+  # Use a different logger for distributed setups.
+  # require 'syslog/logger'
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
+
+  if ENV["RAILS_LOG_TO_STDOUT"].present?
+    logger           = ActiveSupport::Logger.new(STDOUT)
+    logger.formatter = config.log_formatter
+    config.logger = ActiveSupport::TaggedLogging.new(logger)
+  end
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
 end

data/spec/dummy/config/environments/test.rb

@@ -1,4 +1,4 @@
-Dummy::Application.configure do
+Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
   # The test environment is used exclusively to run your application's
@@ -12,9 +12,11 @@ Dummy::Application.configure do
   # preloads Rails for running tests, you may have to set it to true.
   config.eager_load = false
 
-  # Configure static asset server for tests with Cache-Control for performance.
-  config.serve_static_assets  = true
-  config.static_cache_control = "public, max-age=3600"
+  # Configure public file server for tests with Cache-Control for performance.
+  config.public_file_server.enabled = true
+  config.public_file_server.headers = {
+    'Cache-Control' => 'public, max-age=3600'
+  }
 
   # Show full error reports and disable caching.
   config.consider_all_requests_local       = true
@@ -25,6 +27,7 @@ Dummy::Application.configure do
 
   # Disable request forgery protection in test environment.
   config.action_controller.allow_forgery_protection = false
+  config.action_mailer.perform_caching = false
 
   # Tell Action Mailer not to deliver emails to the real world.
   # The :test delivery method accumulates sent emails in the
@@ -33,4 +36,7 @@ Dummy::Application.configure do
 
   # Print deprecation notices to the stderr.
   config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
 end

data/spec/dummy/config/initializers/application_controller_renderer.rb

@@ -0,0 +1,6 @@
+# Be sure to restart your server when you modify this file.
+
+# ApplicationController.renderer.defaults.merge!(
+#   http_host: 'example.org',
+#   https: false
+# )

data/spec/dummy/config/initializers/assets.rb

@@ -0,0 +1,11 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/spec/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Specify a serializer for the signed and encrypted cookie jars.
+# Valid options are :json, :marshal, and :hybrid.
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/dummy/config/initializers/mime_types.rb

@@ -2,4 +2,3 @@
 
 # Add new mime types for use in respond_to blocks:
 # Mime::Type.register "text/richtext", :rtf
-# Mime::Type.register_alias "text/html", :iphone

data/spec/dummy/config/initializers/new_framework_defaults.rb

@@ -0,0 +1,24 @@
+# Be sure to restart your server when you modify this file.
+#
+# This file contains migration options to ease your Rails 5.0 upgrade.
+#
+# Read the Rails 5.0 release notes for more info on each option.
+
+# Enable per-form CSRF tokens. Previous versions had false.
+Rails.application.config.action_controller.per_form_csrf_tokens = true
+
+# Enable origin-checking CSRF mitigation. Previous versions had false.
+Rails.application.config.action_controller.forgery_protection_origin_check = true
+
+# Make Ruby 2.4 preserve the timezone of the receiver when calling `to_time`.
+# Previous versions had false.
+ActiveSupport.to_time_preserves_timezone = true
+
+# Require `belongs_to` associations by default. Previous versions had false.
+Rails.application.config.active_record.belongs_to_required_by_default = true
+
+# Do not halt callback chains when a callback returns false. Previous versions had true.
+ActiveSupport.halt_callback_chains_on_return_false = false
+
+# Configure SSL options to enable HSTS with subdomains. Previous versions had false.
+Rails.application.config.ssl_options = { hsts: { subdomains: true } }

data/spec/dummy/config/initializers/session_store.rb

@@ -1,3 +1,3 @@
 # Be sure to restart your server when you modify this file.
 
-Dummy::Application.config.session_store :cookie_store, key: '_dummy_session'
+Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -5,10 +5,10 @@
 
 # Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
 ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+  wrap_parameters format: [:json]
 end
 
 # To enable root element in JSON for ActiveRecord objects.
 # ActiveSupport.on_load(:active_record) do
-#  self.include_root_in_json = true
+#   self.include_root_in_json = true
 # end

data/spec/dummy/config/puma.rb

@@ -0,0 +1,47 @@
+# Puma can serve each request in a thread from an internal thread pool.
+# The `threads` method setting takes two numbers a minimum and maximum.
+# Any libraries that use thread pools should be configured to match
+# the maximum value specified for Puma. Default is set to 5 threads for minimum
+# and maximum, this matches the default thread size of Active Record.
+#
+threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 }.to_i
+threads threads_count, threads_count
+
+# Specifies the `port` that Puma will listen on to receive requests, default is 3000.
+#
+port        ENV.fetch("PORT") { 3000 }
+
+# Specifies the `environment` that Puma will run in.
+#
+environment ENV.fetch("RAILS_ENV") { "development" }
+
+# Specifies the number of `workers` to boot in clustered mode.
+# Workers are forked webserver processes. If using threads and workers together
+# the concurrency of the application would be max `threads` * `workers`.
+# Workers do not work on JRuby or Windows (both of which do not support
+# processes).
+#
+# workers ENV.fetch("WEB_CONCURRENCY") { 2 }
+
+# Use the `preload_app!` method when specifying a `workers` number.
+# This directive tells Puma to first boot the application and load code
+# before forking the application. This takes advantage of Copy On Write
+# process behavior so workers use less memory. If you use this option
+# you need to make sure to reconnect any threads in the `on_worker_boot`
+# block.
+#
+# preload_app!
+
+# The code in the `on_worker_boot` will be called if you are using
+# clustered mode by specifying a number of `workers`. After each worker
+# process is booted this block will be run, if you are using `preload_app!`
+# option you will want to use this block to reconnect to any threads
+# or connections that may have been created at application boot, Ruby
+# cannot share connections between processes.
+#
+# on_worker_boot do
+#   ActiveRecord::Base.establish_connection if defined?(ActiveRecord)
+# end
+
+# Allow puma to be restarted by `rails restart` command.
+plugin :tmp_restart

data/spec/dummy/config/routes.rb

@@ -1,3 +1,3 @@
-Dummy::Application.routes.draw do
+Rails.application.routes.draw do
   mount Delayed::Web::Engine, at: '/'
 end

data/spec/dummy/config/secrets.yml

@@ -0,0 +1,22 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rails secret` to generate a secure secret key.
+
+# Make sure the secrets in this file are kept private
+# if you're sharing your code publicly.
+
+development:
+  secret_key_base: 96b641211c03bb21466c0074e7a67c06db8368e9a0621a5cfff4f736b0d5ba31c25d1d777b8760917206211112991622e15dee0a91599ba11552302c6029ee8f
+
+test:
+  secret_key_base: 26826880c35d0070226aed14974244beaf073b8914b9fb0e8e8bc867dc0a6981f11c34d3b26d3e552b6e82c66cad3a8b181e8a59c75792f557bee6c0e331475a
+
+# Do not keep production secrets in the repository,
+# instead read values from the environment.
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/spec/dummy/config/spring.rb

@@ -0,0 +1,6 @@
+%w(
+  .ruby-version
+  .rbenv-vars
+  tmp/restart.txt
+  tmp/caching-dev.txt
+).each { |path| Spring.watch(path) }

data/spec/dummy/config.ru

@@ -1,4 +1,5 @@
 # This file is used by Rack-based servers to start the application.
 
-require ::File.expand_path('../config/environment',  __FILE__)
+require_relative 'config/environment'
+
 run Rails.application

data/spec/dummy/db/seeds.rb

@@ -0,0 +1,7 @@
+# This file should contain all the record creation needed to seed the database with its default values.
+# The data can then be loaded with the rails db:seed command (or created alongside the database with db:setup).
+#
+# Examples:
+#
+#   movies = Movie.create([{ name: 'Star Wars' }, { name: 'Lord of the Rings' }])
+#   Character.create(name: 'Luke', movie: movies.first)