db-clone 1.1.1 → 2.0.0

data/spec/dummy/config/environments/development.rb

@@ -1,41 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations.
-  config.active_record.migration_error = :page_load
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-
-  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
-  # yet still be able to expire them through the digest params.
-  config.assets.digest = true
-
-  # Adds additional error checking when serving assets at runtime.
-  # Checks for improperly declared sprockets dependencies.
-  # Raises helpful error messages.
-  config.assets.raise_runtime_errors = true
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/spec/dummy/config/environments/production.rb

@@ -1,79 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like
-  # NGINX, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
-  # yet still be able to expire them through the digest params.
-  config.assets.digest = true
-
-  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
-
-  # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Do not dump schema after migrations.
-  config.active_record.dump_schema_after_migration = false
-end

data/spec/dummy/config/environments/test.rb

@@ -1,42 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure static file server for tests with Cache-Control for performance.
-  config.public_file_server.enabled = true
-  config.public_file_server.headers = { 'Cache-Control' => 'public, max-age=3600' }
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Randomize the order test cases are executed.
-  config.active_support.test_order = :random
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/spec/dummy/config/initializers/assets.rb

@@ -1,11 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Version of your assets, change this if you want to expire all your assets.
-Rails.application.config.assets.version = '1.0'
-
-# Add additional assets to the asset load path
-# Rails.application.config.assets.paths << Emoji.images_path
-
-# Precompile additional assets.
-# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-# Rails.application.config.assets.precompile += %w( search.js )

data/spec/dummy/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/spec/dummy/config/initializers/cookies_serializer.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/dummy/config/initializers/filter_parameter_logging.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]

data/spec/dummy/config/initializers/inflections.rb

@@ -1,16 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new inflection rules using the following format. Inflections
-# are locale specific, and you may define rules for as many different
-# locales as you wish. All of these examples are active by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
-#   inflect.uncountable %w( fish sheep )
-# end
-
-# These inflection rules are supported but not enabled by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.acronym 'RESTful'
-# end

data/spec/dummy/config/initializers/mime_types.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf

data/spec/dummy/config/initializers/session_store.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -1,14 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# This file contains settings for ActionController::ParamsWrapper which
-# is enabled by default.
-
-# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
-ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
-end
-
-# To enable root element in JSON for ActiveRecord objects.
-# ActiveSupport.on_load(:active_record) do
-#  self.include_root_in_json = true
-# end

data/spec/dummy/config/locales/en.yml

@@ -1,23 +0,0 @@
-# Files in the config/locales directory are used for internationalization
-# and are automatically loaded by Rails. If you want to use locales other
-# than English, add the necessary files in this directory.
-#
-# To use the locales, use `I18n.t`:
-#
-#     I18n.t 'hello'
-#
-# In views, this is aliased to just `t`:
-#
-#     <%= t('hello') %>
-#
-# To use a different locale, set it with `I18n.locale`:
-#
-#     I18n.locale = :es
-#
-# This would use the information in config/locales/es.yml.
-#
-# To learn more, please read the Rails Internationalization guide
-# available at http://guides.rubyonrails.org/i18n.html.
-
-en:
-  hello: "Hello world"

data/spec/dummy/config/routes.rb

@@ -1,4 +0,0 @@
-Rails.application.routes.draw do
-
-  mount DbClone::Engine => "/db-clone"
-end

data/spec/dummy/config/secrets.yml

@@ -1,22 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Your secret key is used for verifying the integrity of signed cookies.
-# If you change this key, all old signed cookies will become invalid!
-
-# Make sure the secret is at least 30 characters and all random,
-# no regular words or you'll be exposed to dictionary attacks.
-# You can use `rake secret` to generate a secure secret key.
-
-# Make sure the secrets in this file are kept private
-# if you're sharing your code publicly.
-
-development:
-  secret_key_base: fb5ec20977f6920f1eebaa3ff5eed987ab3b4833733b8f6e14a9413a167ad50d39733b2bca8724527e00380e716302a4a84f10f51334e2bf3a7f4b72d9027e0a
-
-test:
-  secret_key_base: 05c4221deaf9a247d7604f4f5c6ffda159e5d84ca8cd43bb6848b273e60b8c37fcc6ed1b9f912474564ba4e38611d3280b35df72f021ba86839a3e33c102706d
-
-# Do not keep production secrets in the repository,
-# instead read values from the environment.
-production:
-  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/spec/dummy/log/test.log

@@ -1,40 +0,0 @@
-   (0.2ms)  begin transaction
-   (0.1ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.1ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.2ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.1ms)  begin transaction
-   (0.1ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.1ms)  rollback transaction
-   (0.1ms)  begin transaction
-   (0.1ms)  rollback transaction
-   (0.2ms)  begin transaction
-   (0.1ms)  rollback transaction
-   (0.1ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction
-   (0.0ms)  begin transaction
-   (0.0ms)  rollback transaction

data/spec/dummy/public/404.html

@@ -1,67 +0,0 @@
-<!DOCTYPE html>
-<html>
-<head>
-  <title>The page you were looking for doesn't exist (404)</title>
-  <meta name="viewport" content="width=device-width,initial-scale=1">
-  <style>
-  body {
-    background-color: #EFEFEF;
-    color: #2E2F30;
-    text-align: center;
-    font-family: arial, sans-serif;
-    margin: 0;
-  }
-
-  div.dialog {
-    width: 95%;
-    max-width: 33em;
-    margin: 4em auto 0;
-  }
-
-  div.dialog > div {
-    border: 1px solid #CCC;
-    border-right-color: #999;
-    border-left-color: #999;
-    border-bottom-color: #BBB;
-    border-top: #B00100 solid 4px;
-    border-top-left-radius: 9px;
-    border-top-right-radius: 9px;
-    background-color: white;
-    padding: 7px 12% 0;
-    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
-  }
-
-  h1 {
-    font-size: 100%;
-    color: #730E15;
-    line-height: 1.5em;
-  }
-
-  div.dialog > p {
-    margin: 0 0 1em;
-    padding: 1em;
-    background-color: #F7F7F7;
-    border: 1px solid #CCC;
-    border-right-color: #999;
-    border-left-color: #999;
-    border-bottom-color: #999;
-    border-bottom-left-radius: 4px;
-    border-bottom-right-radius: 4px;
-    border-top-color: #DADADA;
-    color: #666;
-    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
-  }
-  </style>
-</head>
-
-<body>
-  <!-- This file lives in public/404.html -->
-  <div class="dialog">
-    <div>
-      <h1>The page you were looking for doesn't exist.</h1>
-      <p>You may have mistyped the address or the page may have moved.</p>
-    </div>
-    <p>If you are the application owner check the logs for more information.</p>
-  </div>
-</body>
-</html>

data/spec/dummy/public/422.html

@@ -1,67 +0,0 @@
-<!DOCTYPE html>
-<html>
-<head>
-  <title>The change you wanted was rejected (422)</title>
-  <meta name="viewport" content="width=device-width,initial-scale=1">
-  <style>
-  body {
-    background-color: #EFEFEF;
-    color: #2E2F30;
-    text-align: center;
-    font-family: arial, sans-serif;
-    margin: 0;
-  }
-
-  div.dialog {
-    width: 95%;
-    max-width: 33em;
-    margin: 4em auto 0;
-  }
-
-  div.dialog > div {
-    border: 1px solid #CCC;
-    border-right-color: #999;
-    border-left-color: #999;
-    border-bottom-color: #BBB;
-    border-top: #B00100 solid 4px;
-    border-top-left-radius: 9px;
-    border-top-right-radius: 9px;
-    background-color: white;
-    padding: 7px 12% 0;
-    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
-  }
-
-  h1 {
-    font-size: 100%;
-    color: #730E15;
-    line-height: 1.5em;
-  }
-
-  div.dialog > p {
-    margin: 0 0 1em;
-    padding: 1em;
-    background-color: #F7F7F7;
-    border: 1px solid #CCC;
-    border-right-color: #999;
-    border-left-color: #999;
-    border-bottom-color: #999;
-    border-bottom-left-radius: 4px;
-    border-bottom-right-radius: 4px;
-    border-top-color: #DADADA;
-    color: #666;
-    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
-  }
-  </style>
-</head>
-
-<body>
-  <!-- This file lives in public/422.html -->
-  <div class="dialog">
-    <div>
-      <h1>The change you wanted was rejected.</h1>
-      <p>Maybe you tried to change something you didn't have access to.</p>
-    </div>
-    <p>If you are the application owner check the logs for more information.</p>
-  </div>
-</body>
-</html>