czmq-ffi-gen 0.13.0-x64-mingw32 → 0.14.1-x64-mingw32

data/lib/czmq-ffi-gen/czmq/ffi/zstr.rb

@@ -73,8 +73,8 @@ module CZMQ
       end
 
       # Receive C string from socket. Caller must free returned string using
-      # zstr_free(). Returns NULL if the context is being terminated or the 
-      # process was interrupted.                                            
+      # zstr_free(). Returns NULL if the context is being terminated or the
+      # process was interrupted.
       #
       # @param source [::FFI::Pointer, #to_ptr]
       # @return [::FFI::AutoPointer]
@@ -84,13 +84,13 @@ module CZMQ
         result
       end
 
-      # Receive a series of strings (until NULL) from multipart data.    
-      # Each string is allocated and filled with string data; if there   
-      # are not enough frames, unallocated strings are set to NULL.      
-      # Returns -1 if the message could not be read, else returns the    
+      # Receive a series of strings (until NULL) from multipart data.
+      # Each string is allocated and filled with string data; if there
+      # are not enough frames, unallocated strings are set to NULL.
+      # Returns -1 if the message could not be read, else returns the
       # number of strings filled, zero or more. Free each returned string
-      # using zstr_free(). If not enough strings are provided, remaining 
-      # multipart frames in the message are dropped.                     
+      # using zstr_free(). If not enough strings are provided, remaining
+      # multipart frames in the message are dropped.
       #
       # @param source [::FFI::Pointer, #to_ptr]
       # @param string_p [::FFI::Pointer, #to_ptr]
@@ -101,10 +101,23 @@ module CZMQ
         result
       end
 
-      # Send a C string to a socket, as a frame. The string is sent without 
+      # De-compress and receive C string from socket, received as a message
+      # with two frames: size of the uncompressed string, and the string itself.
+      # Caller must free returned string using zstr_free(). Returns NULL if the
+      # context is being terminated or the process was interrupted.
+      #
+      # @param source [::FFI::Pointer, #to_ptr]
+      # @return [::FFI::AutoPointer]
+      def self.recv_compress(source)
+        result = ::CZMQ::FFI.zstr_recv_compress(source)
+        result = ::FFI::AutoPointer.new(result, LibC.method(:free))
+        result
+      end
+
+      # Send a C string to a socket, as a frame. The string is sent without
       # trailing null byte; to read this you can use zstr_recv, or a similar
-      # method that adds a null terminator on the received string. String   
-      # may be NULL, which is sent as "".                                   
+      # method that adds a null terminator on the received string. String
+      # may be NULL, which is sent as "".
       #
       # @param dest [::FFI::Pointer, #to_ptr]
       # @param string [String, #to_s, nil]
@@ -115,7 +128,7 @@ module CZMQ
       end
 
       # Send a C string to a socket, as zstr_send(), with a MORE flag, so that
-      # you can send further strings in the same multi-part message.          
+      # you can send further strings in the same multi-part message.
       #
       # @param dest [::FFI::Pointer, #to_ptr]
       # @param string [String, #to_s, nil]
@@ -126,8 +139,8 @@ module CZMQ
       end
 
       # Send a formatted string to a socket. Note that you should NOT use
-      # user-supplied strings in the format (they may contain '%' which  
-      # will create security holes).                                     
+      # user-supplied strings in the format (they may contain '%' which
+      # will create security holes).
       #
       # @param dest [::FFI::Pointer, #to_ptr]
       # @param format [String, #to_s, nil]
@@ -138,9 +151,9 @@ module CZMQ
         result
       end
 
-      # Send a formatted string to a socket, as for zstr_sendf(), with a      
+      # Send a formatted string to a socket, as for zstr_sendf(), with a
       # MORE flag, so that you can send further strings in the same multi-part
-      # message.                                                              
+      # message.
       #
       # @param dest [::FFI::Pointer, #to_ptr]
       # @param format [String, #to_s, nil]
@@ -151,7 +164,7 @@ module CZMQ
         result
       end
 
-      # Send a series of strings (until NULL) as multipart data   
+      # Send a series of strings (until NULL) as multipart data
       # Returns 0 if the strings could be sent OK, or -1 on error.
       #
       # @param dest [::FFI::Pointer, #to_ptr]
@@ -163,8 +176,34 @@ module CZMQ
         result
       end
 
+      # Compress and send a C string to a socket, as a message with two frames:
+      # size of the uncompressed string, and the string itself. The string is
+      # sent without trailing null byte; to read this you can use
+      # zstr_recv_compress, or a similar method that de-compresses and adds a
+      # null terminator on the received string.
+      #
+      # @param dest [::FFI::Pointer, #to_ptr]
+      # @param string [String, #to_s, nil]
+      # @return [Integer]
+      def self.send_compress(dest, string)
+        result = ::CZMQ::FFI.zstr_send_compress(dest, string)
+        result
+      end
+
+      # Compress and send a C string to a socket, as zstr_send_compress(),
+      # with a MORE flag, so that you can send further strings in the same
+      # multi-part message.
+      #
+      # @param dest [::FFI::Pointer, #to_ptr]
+      # @param string [String, #to_s, nil]
+      # @return [Integer]
+      def self.sendm_compress(dest, string)
+        result = ::CZMQ::FFI.zstr_sendm_compress(dest, string)
+        result
+      end
+
       # Accepts a void pointer and returns a fresh character string. If source
-      # is null, returns an empty string.                                     
+      # is null, returns an empty string.
       #
       # @param source [::FFI::Pointer, #to_ptr]
       # @return [::FFI::AutoPointer]
@@ -175,7 +214,7 @@ module CZMQ
       end
 
       # Free a provided string, and nullify the parent pointer. Safe to call on
-      # a null pointer.                                                        
+      # a null pointer.
       #
       # @param string_p [::FFI::Pointer, #to_ptr]
       # @return [void]

data/lib/czmq-ffi-gen/czmq/ffi/zsys.rb

@@ -0,0 +1,836 @@
+################################################################################
+#  THIS FILE IS 100% GENERATED BY ZPROJECT; DO NOT EDIT EXCEPT EXPERIMENTALLY  #
+#  Read the zproject/README.md for information about making permanent changes. #
+################################################################################
+
+module CZMQ
+  module FFI
+
+    #
+    # @note This class is 100% generated using zproject.
+    class Zsys
+      # Raised when one tries to use an instance of {Zsys} after
+      # the internal pointer to the native object has been nullified.
+      class DestroyedError < RuntimeError; end
+
+      # Boilerplate for self pointer, initializer, and finalizer
+      class << self
+        alias :__new :new
+      end
+      # Attaches the pointer _ptr_ to this instance and defines a finalizer for
+      # it if necessary.
+      # @param ptr [::FFI::Pointer]
+      # @param finalize [Boolean]
+      def initialize(ptr, finalize = true)
+        @ptr = ptr
+        if @ptr.null?
+          @ptr = nil # Remove null pointers so we don't have to test for them.
+        elsif finalize
+          @finalizer = self.class.create_finalizer_for @ptr
+          ObjectSpace.define_finalizer self, @finalizer
+        end
+      end
+      # @return [Proc]
+      def self.create_finalizer_for(ptr)
+        Proc.new do
+          "WARNING: "\
+          "Objects of type #{self} cannot be destroyed implicitly. "\
+          "Please call the correct destroy method with the relevant arguments."
+        end
+      end
+      # @return [Boolean]
+      def null?
+        !@ptr or @ptr.null?
+      end
+      # Return internal pointer
+      # @return [::FFI::Pointer]
+      def __ptr
+        raise DestroyedError unless @ptr
+        @ptr
+      end
+      # So external Libraries can just pass the Object to a FFI function which expects a :pointer
+      alias_method :to_ptr, :__ptr
+      # Nullify internal pointer and return pointer pointer.
+      # @note This detaches the current instance from the native object
+      #   and thus makes it unusable.
+      # @return [::FFI::MemoryPointer] the pointer pointing to a pointer
+      #   pointing to the native object
+      def __ptr_give_ref
+        raise DestroyedError unless @ptr
+        ptr_ptr = ::FFI::MemoryPointer.new :pointer
+        ptr_ptr.write_pointer @ptr
+        __undef_finalizer if @finalizer
+        @ptr = nil
+        ptr_ptr
+      end
+      # Undefines the finalizer for this object.
+      # @note Only use this if you need to and can guarantee that the native
+      #   object will be freed by other means.
+      # @return [void]
+      def __undef_finalizer
+        ObjectSpace.undefine_finalizer self
+        @finalizer = nil
+      end
+
+      # Create a new callback of the following type:
+      # Callback for interrupt signal handler
+      #     typedef void (zsys_handler_fn) (
+      #         int signal_value);
+      #
+      # @note WARNING: If your Ruby code doesn't retain a reference to the
+      #   FFI::Function object after passing it to a C function call,
+      #   it may be garbage collected while C still holds the pointer,
+      #   potentially resulting in a segmentation fault.
+      def self.handler_fn
+        ::FFI::Function.new :void, [:int], blocking: true do |signal_value|
+          result = yield signal_value
+          result
+        end
+      end
+
+      # Initialize CZMQ zsys layer; this happens automatically when you create
+      # a socket or an actor; however this call lets you force initialization
+      # earlier, so e.g. logging is properly set-up before you start working.
+      # Not threadsafe, so call only from main thread. Safe to call multiple
+      # times. Returns global CZMQ context.
+      #
+      # @return [::FFI::Pointer]
+      def self.init()
+        result = ::CZMQ::FFI.zsys_init()
+        result
+      end
+
+      # Optionally shut down the CZMQ zsys layer; this normally happens automatically
+      # when the process exits; however this call lets you force a shutdown
+      # earlier, avoiding any potential problems with atexit() ordering, especially
+      # with Windows dlls.
+      #
+      # @return [void]
+      def self.shutdown()
+        result = ::CZMQ::FFI.zsys_shutdown()
+        result
+      end
+
+      # Get a new ZMQ socket, automagically creating a ZMQ context if this is
+      # the first time. Caller is responsible for destroying the ZMQ socket
+      # before process exits, to avoid a ZMQ deadlock. Note: you should not use
+      # this method in CZMQ apps, use zsock_new() instead.
+      # *** This is for CZMQ internal use only and may change arbitrarily ***
+      #
+      # @param type [Integer, #to_int, #to_i]
+      # @param filename [String, #to_s, nil]
+      # @param line_nbr [Integer, #to_int, #to_i]
+      # @return [::FFI::Pointer]
+      def self.socket(type, filename, line_nbr)
+        type = Integer(type)
+        line_nbr = Integer(line_nbr)
+        result = ::CZMQ::FFI.zsys_socket(type, filename, line_nbr)
+        result
+      end
+
+      # Destroy/close a ZMQ socket. You should call this for every socket you
+      # create using zsys_socket().
+      # *** This is for CZMQ internal use only and may change arbitrarily ***
+      #
+      # @param handle [::FFI::Pointer, #to_ptr]
+      # @param filename [String, #to_s, nil]
+      # @param line_nbr [Integer, #to_int, #to_i]
+      # @return [Integer]
+      def self.close(handle, filename, line_nbr)
+        line_nbr = Integer(line_nbr)
+        result = ::CZMQ::FFI.zsys_close(handle, filename, line_nbr)
+        result
+      end
+
+      # Return ZMQ socket name for socket type
+      # *** This is for CZMQ internal use only and may change arbitrarily ***
+      #
+      # @param socktype [Integer, #to_int, #to_i]
+      # @return [::FFI::Pointer]
+      def self.sockname(socktype)
+        socktype = Integer(socktype)
+        result = ::CZMQ::FFI.zsys_sockname(socktype)
+        result
+      end
+
+      # Create a pipe, which consists of two PAIR sockets connected over inproc.
+      # The pipe is configured to use the zsys_pipehwm setting. Returns the
+      # frontend socket successful, NULL if failed.
+      #
+      # @param backend_p [#__ptr_give_ref]
+      # @return [Zsock]
+      def self.create_pipe(backend_p)
+        backend_p = backend_p.__ptr_give_ref
+        result = ::CZMQ::FFI.zsys_create_pipe(backend_p)
+        result = Zsock.__new result, false
+        result
+      end
+
+      # Set interrupt handler; this saves the default handlers so that a
+      # zsys_handler_reset () can restore them. If you call this multiple times
+      # then the last handler will take affect. If handler_fn is NULL, disables
+      # default SIGINT/SIGTERM handling in CZMQ.
+      #
+      # @param handler_fn [::FFI::Pointer, #to_ptr]
+      # @return [void]
+      def self.handler_set(handler_fn)
+        result = ::CZMQ::FFI.zsys_handler_set(handler_fn)
+        result
+      end
+
+      # Reset interrupt handler, call this at exit if needed
+      #
+      # @return [void]
+      def self.handler_reset()
+        result = ::CZMQ::FFI.zsys_handler_reset()
+        result
+      end
+
+      # Set default interrupt handler, so Ctrl-C or SIGTERM will set
+      # zsys_interrupted. Idempotent; safe to call multiple times.
+      # Can be supressed by ZSYS_SIGHANDLER=false
+      # *** This is for CZMQ internal use only and may change arbitrarily ***
+      #
+      # @return [void]
+      def self.catch_interrupts()
+        result = ::CZMQ::FFI.zsys_catch_interrupts()
+        result
+      end
+
+      # Return 1 if file exists, else zero
+      #
+      # @param filename [String, #to_s, nil]
+      # @return [Boolean]
+      def self.file_exists(filename)
+        result = ::CZMQ::FFI.zsys_file_exists(filename)
+        result
+      end
+
+      # Return file modification time. Returns 0 if the file does not exist.
+      #
+      # @param filename [String, #to_s, nil]
+      # @return [::FFI::Pointer]
+      def self.file_modified(filename)
+        result = ::CZMQ::FFI.zsys_file_modified(filename)
+        result
+      end
+
+      # Return file mode; provides at least support for the POSIX S_ISREG(m)
+      # and S_ISDIR(m) macros and the S_IRUSR and S_IWUSR bits, on all boxes.
+      # Returns a mode_t cast to int, or -1 in case of error.
+      #
+      # @param filename [String, #to_s, nil]
+      # @return [Integer]
+      def self.file_mode(filename)
+        result = ::CZMQ::FFI.zsys_file_mode(filename)
+        result
+      end
+
+      # Delete file. Does not complain if the file is absent
+      #
+      # @param filename [String, #to_s, nil]
+      # @return [Integer]
+      def self.file_delete(filename)
+        result = ::CZMQ::FFI.zsys_file_delete(filename)
+        result
+      end
+
+      # Check if file is 'stable'
+      #
+      # @param filename [String, #to_s, nil]
+      # @return [Boolean]
+      def self.file_stable(filename)
+        result = ::CZMQ::FFI.zsys_file_stable(filename)
+        result
+      end
+
+      # Create a file path if it doesn't exist. The file path is treated as
+      # printf format.
+      #
+      # @param pathname [String, #to_s, nil]
+      # @param args [Array<Object>] see https://github.com/ffi/ffi/wiki/examples#using-varargs
+      # @return [Integer]
+      def self.dir_create(pathname, *args)
+        result = ::CZMQ::FFI.zsys_dir_create(pathname, *args)
+        result
+      end
+
+      # Remove a file path if empty; the pathname is treated as printf format.
+      #
+      # @param pathname [String, #to_s, nil]
+      # @param args [Array<Object>] see https://github.com/ffi/ffi/wiki/examples#using-varargs
+      # @return [Integer]
+      def self.dir_delete(pathname, *args)
+        result = ::CZMQ::FFI.zsys_dir_delete(pathname, *args)
+        result
+      end
+
+      # Move to a specified working directory. Returns 0 if OK, -1 if this failed.
+      #
+      # @param pathname [String, #to_s, nil]
+      # @return [Integer]
+      def self.dir_change(pathname)
+        result = ::CZMQ::FFI.zsys_dir_change(pathname)
+        result
+      end
+
+      # Set private file creation mode; all files created from here will be
+      # readable/writable by the owner only.
+      #
+      # @return [void]
+      def self.file_mode_private()
+        result = ::CZMQ::FFI.zsys_file_mode_private()
+        result
+      end
+
+      # Reset default file creation mode; all files created from here will use
+      # process file mode defaults.
+      #
+      # @return [void]
+      def self.file_mode_default()
+        result = ::CZMQ::FFI.zsys_file_mode_default()
+        result
+      end
+
+      # Return the CZMQ version for run-time API detection; returns version
+      # number into provided fields, providing reference isn't null in each case.
+      #
+      # @param major [::FFI::Pointer, #to_ptr]
+      # @param minor [::FFI::Pointer, #to_ptr]
+      # @param patch [::FFI::Pointer, #to_ptr]
+      # @return [void]
+      def self.version(major, minor, patch)
+        result = ::CZMQ::FFI.zsys_version(major, minor, patch)
+        result
+      end
+
+      # Format a string using printf formatting, returning a freshly allocated
+      # buffer. If there was insufficient memory, returns NULL. Free the returned
+      # string using zstr_free().
+      #
+      # @param format [String, #to_s, nil]
+      # @param args [Array<Object>] see https://github.com/ffi/ffi/wiki/examples#using-varargs
+      # @return [::FFI::Pointer]
+      def self.sprintf(format, *args)
+        result = ::CZMQ::FFI.zsys_sprintf(format, *args)
+        result
+      end
+
+      # Format a string with a va_list argument, returning a freshly allocated
+      # buffer. If there was insufficient memory, returns NULL. Free the returned
+      # string using zstr_free().
+      #
+      # @param format [String, #to_s, nil]
+      # @param argptr [::FFI::Pointer, #to_ptr]
+      # @return [::FFI::Pointer]
+      def self.vprintf(format, argptr)
+        result = ::CZMQ::FFI.zsys_vprintf(format, argptr)
+        result
+      end
+
+      # Create UDP beacon socket; if the routable option is true, uses
+      # multicast (not yet implemented), else uses broadcast. This method
+      # and related ones might _eventually_ be moved to a zudp class.
+      # *** This is for CZMQ internal use only and may change arbitrarily ***
+      #
+      # @param routable [Boolean]
+      # @return [Integer or FFI::Pointer]
+      def self.udp_new(routable)
+        routable = !(0==routable||!routable) # boolean
+        result = ::CZMQ::FFI.zsys_udp_new(routable)
+        result
+      end
+
+      # Close a UDP socket
+      # *** This is for CZMQ internal use only and may change arbitrarily ***
+      #
+      # @param handle [Integer or FFI::Pointer]
+      # @return [Integer]
+      def self.udp_close(handle)
+        result = ::CZMQ::FFI.zsys_udp_close(handle)
+        result
+      end
+
+      # Send zframe to UDP socket, return -1 if sending failed due to
+      # interface having disappeared (happens easily with WiFi)
+      # *** This is for CZMQ internal use only and may change arbitrarily ***
+      #
+      # @param udpsock [Integer or FFI::Pointer]
+      # @param frame [Zframe, #__ptr]
+      # @param address [::FFI::Pointer, #to_ptr]
+      # @param addrlen [Integer, #to_int, #to_i]
+      # @return [Integer]
+      def self.udp_send(udpsock, frame, address, addrlen)
+        frame = frame.__ptr if frame
+        addrlen = Integer(addrlen)
+        result = ::CZMQ::FFI.zsys_udp_send(udpsock, frame, address, addrlen)
+        result
+      end
+
+      # Receive zframe from UDP socket, and set address of peer that sent it
+      # The peername must be a char [INET_ADDRSTRLEN] array if IPv6 is disabled or
+      # NI_MAXHOST if it's enabled. Returns NULL when failing to get peer address.
+      # *** This is for CZMQ internal use only and may change arbitrarily ***
+      #
+      # @param udpsock [Integer or FFI::Pointer]
+      # @param peername [::FFI::Pointer, #to_ptr]
+      # @param peerlen [Integer, #to_int, #to_i]
+      # @return [Zframe]
+      def self.udp_recv(udpsock, peername, peerlen)
+        peerlen = Integer(peerlen)
+        result = ::CZMQ::FFI.zsys_udp_recv(udpsock, peername, peerlen)
+        result = Zframe.__new result, false
+        result
+      end
+
+      # Handle an I/O error on some socket operation; will report and die on
+      # fatal errors, and continue silently on "try again" errors.
+      # *** This is for CZMQ internal use only and may change arbitrarily ***
+      #
+      # @param reason [String, #to_s, nil]
+      # @return [void]
+      def self.socket_error(reason)
+        result = ::CZMQ::FFI.zsys_socket_error(reason)
+        result
+      end
+
+      # Return current host name, for use in public tcp:// endpoints. Caller gets
+      # a freshly allocated string, should free it using zstr_free(). If the host
+      # name is not resolvable, returns NULL.
+      #
+      # @return [::FFI::Pointer]
+      def self.hostname()
+        result = ::CZMQ::FFI.zsys_hostname()
+        result
+      end
+
+      # Move the current process into the background. The precise effect depends
+      # on the operating system. On POSIX boxes, moves to a specified working
+      # directory (if specified), closes all file handles, reopens stdin, stdout,
+      # and stderr to the null device, and sets the process to ignore SIGHUP. On
+      # Windows, does nothing. Returns 0 if OK, -1 if there was an error.
+      #
+      # @param workdir [String, #to_s, nil]
+      # @return [Integer]
+      def self.daemonize(workdir)
+        result = ::CZMQ::FFI.zsys_daemonize(workdir)
+        result
+      end
+
+      # Drop the process ID into the lockfile, with exclusive lock, and switch
+      # the process to the specified group and/or user. Any of the arguments
+      # may be null, indicating a no-op. Returns 0 on success, -1 on failure.
+      # Note if you combine this with zsys_daemonize, run after, not before
+      # that method, or the lockfile will hold the wrong process ID.
+      #
+      # @param lockfile [String, #to_s, nil]
+      # @param group [String, #to_s, nil]
+      # @param user [String, #to_s, nil]
+      # @return [Integer]
+      def self.run_as(lockfile, group, user)
+        result = ::CZMQ::FFI.zsys_run_as(lockfile, group, user)
+        result
+      end
+
+      # Returns true if the underlying libzmq supports CURVE security.
+      # Uses a heuristic probe according to the version of libzmq being used.
+      #
+      # @return [Boolean]
+      def self.has_curve()
+        result = ::CZMQ::FFI.zsys_has_curve()
+        result
+      end
+
+      # Configure the number of I/O threads that ZeroMQ will use. A good
+      # rule of thumb is one thread per gigabit of traffic in or out. The
+      # default is 1, sufficient for most applications. If the environment
+      # variable ZSYS_IO_THREADS is defined, that provides the default.
+      # Note that this method is valid only before any socket is created.
+      #
+      # @param io_threads [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_io_threads(io_threads)
+        io_threads = Integer(io_threads)
+        result = ::CZMQ::FFI.zsys_set_io_threads(io_threads)
+        result
+      end
+
+      # Configure the scheduling policy of the ZMQ context thread pool.
+      # Not available on Windows. See the sched_setscheduler man page or sched.h
+      # for more information. If the environment variable ZSYS_THREAD_SCHED_POLICY
+      # is defined, that provides the default.
+      # Note that this method is valid only before any socket is created.
+      #
+      # @param policy [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_thread_sched_policy(policy)
+        policy = Integer(policy)
+        result = ::CZMQ::FFI.zsys_set_thread_sched_policy(policy)
+        result
+      end
+
+      # Configure the scheduling priority of the ZMQ context thread pool.
+      # Not available on Windows. See the sched_setscheduler man page or sched.h
+      # for more information. If the environment variable ZSYS_THREAD_PRIORITY is
+      # defined, that provides the default.
+      # Note that this method is valid only before any socket is created.
+      #
+      # @param priority [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_thread_priority(priority)
+        priority = Integer(priority)
+        result = ::CZMQ::FFI.zsys_set_thread_priority(priority)
+        result
+      end
+
+      # Configure the number of sockets that ZeroMQ will allow. The default
+      # is 1024. The actual limit depends on the system, and you can query it
+      # by using zsys_socket_limit (). A value of zero means "maximum".
+      # Note that this method is valid only before any socket is created.
+      #
+      # @param max_sockets [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_max_sockets(max_sockets)
+        max_sockets = Integer(max_sockets)
+        result = ::CZMQ::FFI.zsys_set_max_sockets(max_sockets)
+        result
+      end
+
+      # Return maximum number of ZeroMQ sockets that the system will support.
+      #
+      # @return [Integer]
+      def self.socket_limit()
+        result = ::CZMQ::FFI.zsys_socket_limit()
+        result
+      end
+
+      # Configure the maximum allowed size of a message sent.
+      # The default is INT_MAX.
+      #
+      # @param max_msgsz [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_max_msgsz(max_msgsz)
+        max_msgsz = Integer(max_msgsz)
+        result = ::CZMQ::FFI.zsys_set_max_msgsz(max_msgsz)
+        result
+      end
+
+      # Return maximum message size.
+      #
+      # @return [Integer]
+      def self.max_msgsz()
+        result = ::CZMQ::FFI.zsys_max_msgsz()
+        result
+      end
+
+      # Configure the threshold value of filesystem object age per st_mtime
+      # that should elapse until we consider that object "stable" at the
+      # current zclock_time() moment.
+      # The default is S_DEFAULT_ZSYS_FILE_STABLE_AGE_MSEC defined in zsys.c
+      # which generally depends on host OS, with fallback value of 5000.
+      #
+      # @param file_stable_age_msec [::FFI::Pointer, #to_ptr]
+      # @return [void]
+      def self.set_file_stable_age_msec(file_stable_age_msec)
+        result = ::CZMQ::FFI.zsys_set_file_stable_age_msec(file_stable_age_msec)
+        result
+      end
+
+      # Return current threshold value of file stable age in msec.
+      # This can be used in code that chooses to wait for this timeout
+      # before testing if a filesystem object is "stable" or not.
+      #
+      # @return [::FFI::Pointer]
+      def self.file_stable_age_msec()
+        result = ::CZMQ::FFI.zsys_file_stable_age_msec()
+        result
+      end
+
+      # Configure the default linger timeout in msecs for new zsock instances.
+      # You can also set this separately on each zsock_t instance. The default
+      # linger time is zero, i.e. any pending messages will be dropped. If the
+      # environment variable ZSYS_LINGER is defined, that provides the default.
+      # Note that process exit will typically be delayed by the linger time.
+      #
+      # @param linger [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_linger(linger)
+        linger = Integer(linger)
+        result = ::CZMQ::FFI.zsys_set_linger(linger)
+        result
+      end
+
+      # Configure the default outgoing pipe limit (HWM) for new zsock instances.
+      # You can also set this separately on each zsock_t instance. The default
+      # HWM is 1,000, on all versions of ZeroMQ. If the environment variable
+      # ZSYS_SNDHWM is defined, that provides the default. Note that a value of
+      # zero means no limit, i.e. infinite memory consumption.
+      #
+      # @param sndhwm [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_sndhwm(sndhwm)
+        sndhwm = Integer(sndhwm)
+        result = ::CZMQ::FFI.zsys_set_sndhwm(sndhwm)
+        result
+      end
+
+      # Configure the default incoming pipe limit (HWM) for new zsock instances.
+      # You can also set this separately on each zsock_t instance. The default
+      # HWM is 1,000, on all versions of ZeroMQ. If the environment variable
+      # ZSYS_RCVHWM is defined, that provides the default. Note that a value of
+      # zero means no limit, i.e. infinite memory consumption.
+      #
+      # @param rcvhwm [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_rcvhwm(rcvhwm)
+        rcvhwm = Integer(rcvhwm)
+        result = ::CZMQ::FFI.zsys_set_rcvhwm(rcvhwm)
+        result
+      end
+
+      # Configure the default HWM for zactor internal pipes; this is set on both
+      # ends of the pipe, for outgoing messages only (sndhwm). The default HWM is
+      # 1,000, on all versions of ZeroMQ. If the environment var ZSYS_ACTORHWM is
+      # defined, that provides the default. Note that a value of zero means no
+      # limit, i.e. infinite memory consumption.
+      #
+      # @param pipehwm [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_pipehwm(pipehwm)
+        pipehwm = Integer(pipehwm)
+        result = ::CZMQ::FFI.zsys_set_pipehwm(pipehwm)
+        result
+      end
+
+      # Return the HWM for zactor internal pipes.
+      #
+      # @return [Integer]
+      def self.pipehwm()
+        result = ::CZMQ::FFI.zsys_pipehwm()
+        result
+      end
+
+      # Configure use of IPv6 for new zsock instances. By default sockets accept
+      # and make only IPv4 connections. When you enable IPv6, sockets will accept
+      # and connect to both IPv4 and IPv6 peers. You can override the setting on
+      # each zsock_t instance. The default is IPv4 only (ipv6 set to 0). If the
+      # environment variable ZSYS_IPV6 is defined (as 1 or 0), this provides the
+      # default. Note: has no effect on ZMQ v2.
+      #
+      # @param ipv6 [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_ipv6(ipv6)
+        ipv6 = Integer(ipv6)
+        result = ::CZMQ::FFI.zsys_set_ipv6(ipv6)
+        result
+      end
+
+      # Return use of IPv6 for zsock instances.
+      #
+      # @return [Integer]
+      def self.ipv6()
+        result = ::CZMQ::FFI.zsys_ipv6()
+        result
+      end
+
+      # Set network interface name to use for broadcasts, particularly zbeacon.
+      # This lets the interface be configured for test environments where required.
+      # For example, on Mac OS X, zbeacon cannot bind to 255.255.255.255 which is
+      # the default when there is no specified interface. If the environment
+      # variable ZSYS_INTERFACE is set, use that as the default interface name.
+      # Setting the interface to "*" means "use all available interfaces".
+      #
+      # @param value [String, #to_s, nil]
+      # @return [void]
+      def self.set_interface(value)
+        result = ::CZMQ::FFI.zsys_set_interface(value)
+        result
+      end
+
+      # Return network interface to use for broadcasts, or "" if none was set.
+      #
+      # @return [String]
+      def self.interface()
+        result = ::CZMQ::FFI.zsys_interface()
+        result
+      end
+
+      # Set IPv6 address to use zbeacon socket, particularly for receiving zbeacon.
+      # This needs to be set IPv6 is enabled as IPv6 can have multiple addresses
+      # on a given interface. If the environment variable ZSYS_IPV6_ADDRESS is set,
+      # use that as the default IPv6 address.
+      #
+      # @param value [String, #to_s, nil]
+      # @return [void]
+      def self.set_ipv6_address(value)
+        result = ::CZMQ::FFI.zsys_set_ipv6_address(value)
+        result
+      end
+
+      # Return IPv6 address to use for zbeacon reception, or "" if none was set.
+      #
+      # @return [String]
+      def self.ipv6_address()
+        result = ::CZMQ::FFI.zsys_ipv6_address()
+        result
+      end
+
+      # Set IPv6 milticast address to use for sending zbeacon messages. This needs
+      # to be set if IPv6 is enabled. If the environment variable
+      # ZSYS_IPV6_MCAST_ADDRESS is set, use that as the default IPv6 multicast
+      # address.
+      #
+      # @param value [String, #to_s, nil]
+      # @return [void]
+      def self.set_ipv6_mcast_address(value)
+        result = ::CZMQ::FFI.zsys_set_ipv6_mcast_address(value)
+        result
+      end
+
+      # Return IPv6 multicast address to use for sending zbeacon, or "" if none was
+      # set.
+      #
+      # @return [String]
+      def self.ipv6_mcast_address()
+        result = ::CZMQ::FFI.zsys_ipv6_mcast_address()
+        result
+      end
+
+      # Configure the automatic use of pre-allocated FDs when creating new sockets.
+      # If 0 (default), nothing will happen. Else, when a new socket is bound, the
+      # system API will be used to check if an existing pre-allocated FD with a
+      # matching port (if TCP) or path (if IPC) exists, and if it does it will be
+      # set via the ZMQ_USE_FD socket option so that the library will use it
+      # instead of creating a new socket.
+      #
+      # @param auto_use_fd [Integer, #to_int, #to_i]
+      # @return [void]
+      def self.set_auto_use_fd(auto_use_fd)
+        auto_use_fd = Integer(auto_use_fd)
+        result = ::CZMQ::FFI.zsys_set_auto_use_fd(auto_use_fd)
+        result
+      end
+
+      # Return use of automatic pre-allocated FDs for zsock instances.
+      #
+      # @return [Integer]
+      def self.auto_use_fd()
+        result = ::CZMQ::FFI.zsys_auto_use_fd()
+        result
+      end
+
+      # Set log identity, which is a string that prefixes all log messages sent
+      # by this process. The log identity defaults to the environment variable
+      # ZSYS_LOGIDENT, if that is set.
+      #
+      # @param value [String, #to_s, nil]
+      # @return [void]
+      def self.set_logident(value)
+        result = ::CZMQ::FFI.zsys_set_logident(value)
+        result
+      end
+
+      # Set stream to receive log traffic. By default, log traffic is sent to
+      # stdout. If you set the stream to NULL, no stream will receive the log
+      # traffic (it may still be sent to the system facility).
+      #
+      # @param stream [::FFI::Pointer, #to_ptr]
+      # @return [void]
+      def self.set_logstream(stream)
+        result = ::CZMQ::FFI.zsys_set_logstream(stream)
+        result
+      end
+
+      # Sends log output to a PUB socket bound to the specified endpoint. To
+      # collect such log output, create a SUB socket, subscribe to the traffic
+      # you care about, and connect to the endpoint. Log traffic is sent as a
+      # single string frame, in the same format as when sent to stdout. The
+      # log system supports a single sender; multiple calls to this method will
+      # bind the same sender to multiple endpoints. To disable the sender, call
+      # this method with a null argument.
+      #
+      # @param endpoint [String, #to_s, nil]
+      # @return [void]
+      def self.set_logsender(endpoint)
+        result = ::CZMQ::FFI.zsys_set_logsender(endpoint)
+        result
+      end
+
+      # Enable or disable logging to the system facility (syslog on POSIX boxes,
+      # event log on Windows). By default this is disabled.
+      #
+      # @param logsystem [Boolean]
+      # @return [void]
+      def self.set_logsystem(logsystem)
+        logsystem = !(0==logsystem||!logsystem) # boolean
+        result = ::CZMQ::FFI.zsys_set_logsystem(logsystem)
+        result
+      end
+
+      # Log error condition - highest priority
+      #
+      # @param format [String, #to_s, nil]
+      # @param args [Array<Object>] see https://github.com/ffi/ffi/wiki/examples#using-varargs
+      # @return [void]
+      def self.error(format, *args)
+        result = ::CZMQ::FFI.zsys_error(format, *args)
+        result
+      end
+
+      # Log warning condition - high priority
+      #
+      # @param format [String, #to_s, nil]
+      # @param args [Array<Object>] see https://github.com/ffi/ffi/wiki/examples#using-varargs
+      # @return [void]
+      def self.warning(format, *args)
+        result = ::CZMQ::FFI.zsys_warning(format, *args)
+        result
+      end
+
+      # Log normal, but significant, condition - normal priority
+      #
+      # @param format [String, #to_s, nil]
+      # @param args [Array<Object>] see https://github.com/ffi/ffi/wiki/examples#using-varargs
+      # @return [void]
+      def self.notice(format, *args)
+        result = ::CZMQ::FFI.zsys_notice(format, *args)
+        result
+      end
+
+      # Log informational message - low priority
+      #
+      # @param format [String, #to_s, nil]
+      # @param args [Array<Object>] see https://github.com/ffi/ffi/wiki/examples#using-varargs
+      # @return [void]
+      def self.info(format, *args)
+        result = ::CZMQ::FFI.zsys_info(format, *args)
+        result
+      end
+
+      # Log debug-level message - lowest priority
+      #
+      # @param format [String, #to_s, nil]
+      # @param args [Array<Object>] see https://github.com/ffi/ffi/wiki/examples#using-varargs
+      # @return [void]
+      def self.debug(format, *args)
+        result = ::CZMQ::FFI.zsys_debug(format, *args)
+        result
+      end
+
+      # Self test of this class.
+      #
+      # @param verbose [Boolean]
+      # @return [void]
+      def self.test(verbose)
+        verbose = !(0==verbose||!verbose) # boolean
+        result = ::CZMQ::FFI.zsys_test(verbose)
+        result
+      end
+    end
+  end
+end
+
+################################################################################
+#  THIS FILE IS 100% GENERATED BY ZPROJECT; DO NOT EDIT EXCEPT EXPERIMENTALLY  #
+#  Read the zproject/README.md for information about making permanent changes. #
+################################################################################