czmq-ffi-gen 0.9.2-x64-mingw32

data/vendor/local/include/zsys.h

@@ -0,0 +1,386 @@
+/*  =========================================================================
+    zsys - system-level methods
+
+    Copyright (c) the Contributors as noted in the AUTHORS file.
+    This file is part of CZMQ, the high-level C binding for 0MQ:
+    http://czmq.zeromq.org.
+
+    This Source Code Form is subject to the terms of the Mozilla Public
+    License, v. 2.0. If a copy of the MPL was not distributed with this
+    file, You can obtain one at http://mozilla.org/MPL/2.0/.
+    =========================================================================
+*/
+
+#ifndef __ZSYS_H_INCLUDED__
+#define __ZSYS_H_INCLUDED__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//  @interface
+#define UDP_FRAME_MAX   255         //  Max size of UDP frame
+
+//  Callback for interrupt signal handler
+typedef void (zsys_handler_fn) (int signal_value);
+
+//  Initialize CZMQ zsys layer; this happens automatically when you create
+//  a socket or an actor; however this call lets you force initialization
+//  earlier, so e.g. logging is properly set-up before you start working.
+//  Not threadsafe, so call only from main thread. Safe to call multiple
+//  times. Returns global CZMQ context.
+CZMQ_EXPORT void *
+    zsys_init (void);
+
+//  Optionally shut down the CZMQ zsys layer; this normally happens automatically
+//  when the process exits; however this call lets you force a shutdown
+//  earlier, avoiding any potential problems with atexit() ordering, especially
+//  with Windows dlls.
+CZMQ_EXPORT void
+    zsys_shutdown (void);
+
+//  Get a new ZMQ socket, automagically creating a ZMQ context if this is
+//  the first time. Caller is responsible for destroying the ZMQ socket
+//  before process exits, to avoid a ZMQ deadlock. Note: you should not use
+//  this method in CZMQ apps, use zsock_new() instead.
+//  *** This is for CZMQ internal use only and may change arbitrarily ***
+CZMQ_EXPORT void *
+    zsys_socket (int type, const char *filename, size_t line_nbr);
+
+//  Destroy/close a ZMQ socket. You should call this for every socket you
+//  create using zsys_socket().
+//  *** This is for CZMQ internal use only and may change arbitrarily ***
+CZMQ_EXPORT int
+    zsys_close (void *handle, const char *filename, size_t line_nbr);
+
+//  Return ZMQ socket name for socket type
+//  *** This is for CZMQ internal use only and may change arbitrarily ***
+CZMQ_EXPORT char *
+    zsys_sockname (int socktype);
+    
+//  Create a pipe, which consists of two PAIR sockets connected over inproc.
+//  The pipe is configured to use the zsys_pipehwm setting. Returns the
+//  frontend socket successful, NULL if failed.
+CZMQ_EXPORT zsock_t *
+    zsys_create_pipe (zsock_t **backend_p);
+    
+//  Set interrupt handler; this saves the default handlers so that a
+//  zsys_handler_reset () can restore them. If you call this multiple times
+//  then the last handler will take affect. If handler_fn is NULL, disables
+//  default SIGINT/SIGTERM handling in CZMQ.
+CZMQ_EXPORT void
+    zsys_handler_set (zsys_handler_fn *handler_fn);
+
+//  Reset interrupt handler, call this at exit if needed
+CZMQ_EXPORT void
+    zsys_handler_reset (void);
+
+//  Set default interrupt handler, so Ctrl-C or SIGTERM will set
+//  zsys_interrupted. Idempotent; safe to call multiple times.
+//  *** This is for CZMQ internal use only and may change arbitrarily ***
+CZMQ_EXPORT void
+    zsys_catch_interrupts (void);
+
+//  Return 1 if file exists, else zero
+CZMQ_EXPORT bool
+    zsys_file_exists (const char *filename);
+
+//  Return size of file, or -1 if not found
+CZMQ_EXPORT ssize_t
+    zsys_file_size (const char *filename);
+
+//  Return file modification time. Returns 0 if the file does not exist.
+CZMQ_EXPORT time_t
+    zsys_file_modified (const char *filename);
+
+//  Return file mode; provides at least support for the POSIX S_ISREG(m)
+//  and S_ISDIR(m) macros and the S_IRUSR and S_IWUSR bits, on all boxes.
+//  Returns a mode_t cast to int, or -1 in case of error.
+CZMQ_EXPORT int
+    zsys_file_mode (const char *filename);
+
+//  Delete file. Does not complain if the file is absent
+CZMQ_EXPORT int
+    zsys_file_delete (const char *filename);
+
+//  Check if file is 'stable'
+CZMQ_EXPORT bool
+    zsys_file_stable (const char *filename);
+
+//  Create a file path if it doesn't exist. The file path is treated as a 
+//  printf format.
+CZMQ_EXPORT int
+    zsys_dir_create (const char *pathname, ...);
+
+//  Remove a file path if empty; the pathname is treated as printf format.
+CZMQ_EXPORT int
+    zsys_dir_delete (const char *pathname, ...);
+
+//  Move to a specified working directory. Returns 0 if OK, -1 if this failed.
+CZMQ_EXPORT int
+    zsys_dir_change (const char *pathname);
+
+//  Set private file creation mode; all files created from here will be
+//  readable/writable by the owner only.
+CZMQ_EXPORT void
+    zsys_file_mode_private (void);
+
+//  Reset default file creation mode; all files created from here will use
+//  process file mode defaults.
+CZMQ_EXPORT void
+    zsys_file_mode_default (void);
+
+//  Return the CZMQ version for run-time API detection; returns version
+//  number into provided fields, providing reference isn't null in each case.
+CZMQ_EXPORT void
+    zsys_version (int *major, int *minor, int *patch);
+
+//  Format a string using printf formatting, returning a freshly allocated
+//  buffer. If there was insufficient memory, returns NULL. Free the returned
+//  string using zstr_free().
+CZMQ_EXPORT char *
+    zsys_sprintf (const char *format, ...);
+
+//  Format a string with a va_list argument, returning a freshly allocated
+//  buffer. If there was insufficient memory, returns NULL. Free the returned
+//  string using zstr_free().
+CZMQ_EXPORT char *
+    zsys_vprintf (const char *format, va_list argptr);
+
+//  Create UDP beacon socket; if the routable option is true, uses
+//  multicast (not yet implemented), else uses broadcast. This method
+//  and related ones might _eventually_ be moved to a zudp class.
+//  *** This is for CZMQ internal use only and may change arbitrarily ***
+CZMQ_EXPORT SOCKET
+    zsys_udp_new (bool routable);
+
+//  Close a UDP socket
+//  *** This is for CZMQ internal use only and may change arbitrarily ***
+CZMQ_EXPORT int
+    zsys_udp_close (SOCKET handle);
+
+//  Send zframe to UDP socket, return -1 if sending failed due to
+//  interface having disappeared (happens easily with WiFi)
+//  *** This is for CZMQ internal use only and may change arbitrarily ***
+CZMQ_EXPORT int
+    zsys_udp_send (SOCKET udpsock, zframe_t *frame, inaddr_t *address, int addrlen);
+
+//  Receive zframe from UDP socket, and set address of peer that sent it
+//  The peername must be a char [INET_ADDRSTRLEN] array.
+//  *** This is for CZMQ internal use only and may change arbitrarily ***
+CZMQ_EXPORT zframe_t *
+    zsys_udp_recv (SOCKET udpsock, char *peername, int peerlen);
+
+//  Handle an I/O error on some socket operation; will report and die on
+//  fatal errors, and continue silently on "try again" errors.
+//  *** This is for CZMQ internal use only and may change arbitrarily ***
+CZMQ_EXPORT void
+    zsys_socket_error (const char *reason);
+
+//  Return current host name, for use in public tcp:// endpoints. Caller gets
+//  a freshly allocated string, should free it using zstr_free(). If the host
+//  name is not resolvable, returns NULL.
+CZMQ_EXPORT char *
+    zsys_hostname (void);
+
+//  Move the current process into the background. The precise effect depends
+//  on the operating system. On POSIX boxes, moves to a specified working
+//  directory (if specified), closes all file handles, reopens stdin, stdout,
+//  and stderr to the null device, and sets the process to ignore SIGHUP. On
+//  Windows, does nothing. Returns 0 if OK, -1 if there was an error.
+CZMQ_EXPORT int
+    zsys_daemonize (const char *workdir);
+
+//  Drop the process ID into the lockfile, with exclusive lock, and switch
+//  the process to the specified group and/or user. Any of the arguments
+//  may be null, indicating a no-op. Returns 0 on success, -1 on failure.
+//  Note if you combine this with zsys_daemonize, run after, not before
+//  that method, or the lockfile will hold the wrong process ID.
+CZMQ_EXPORT int
+    zsys_run_as (const char *lockfile, const char *group, const char *user);
+
+//  Returns true if the underlying libzmq supports CURVE security.
+//  Uses a heuristic probe according to the version of libzmq being used.
+CZMQ_EXPORT bool
+    zsys_has_curve (void);
+
+//  Configure the number of I/O threads that ZeroMQ will use. A good
+//  rule of thumb is one thread per gigabit of traffic in or out. The
+//  default is 1, sufficient for most applications. If the environment
+//  variable ZSYS_IO_THREADS is defined, that provides the default.
+//  Note that this method is valid only before any socket is created.
+CZMQ_EXPORT void
+    zsys_set_io_threads (size_t io_threads);
+
+//  Configure the number of sockets that ZeroMQ will allow. The default
+//  is 1024. The actual limit depends on the system, and you can query it
+//  by using zsys_socket_limit (). A value of zero means "maximum".
+//  Note that this method is valid only before any socket is created.
+CZMQ_EXPORT void
+    zsys_set_max_sockets (size_t max_sockets);
+
+//  Return maximum number of ZeroMQ sockets that the system will support.
+CZMQ_EXPORT size_t
+    zsys_socket_limit (void);
+
+//  Configure the default linger timeout in msecs for new zsock instances.
+//  You can also set this separately on each zsock_t instance. The default
+//  linger time is zero, i.e. any pending messages will be dropped. If the
+//  environment variable ZSYS_LINGER is defined, that provides the default.
+//  Note that process exit will typically be delayed by the linger time.
+CZMQ_EXPORT void
+    zsys_set_linger (size_t linger);
+
+//  Configure the default outgoing pipe limit (HWM) for new zsock instances.
+//  You can also set this separately on each zsock_t instance. The default
+//  HWM is 1,000, on all versions of ZeroMQ. If the environment variable
+//  ZSYS_SNDHWM is defined, that provides the default. Note that a value of
+//  zero means no limit, i.e. infinite memory consumption.
+CZMQ_EXPORT void
+    zsys_set_sndhwm (size_t sndhwm);
+
+//  Configure the default incoming pipe limit (HWM) for new zsock instances.
+//  You can also set this separately on each zsock_t instance. The default
+//  HWM is 1,000, on all versions of ZeroMQ. If the environment variable
+//  ZSYS_RCVHWM is defined, that provides the default. Note that a value of
+//  zero means no limit, i.e. infinite memory consumption.
+CZMQ_EXPORT void
+    zsys_set_rcvhwm (size_t rcvhwm);
+
+//  Configure the default HWM for zactor internal pipes; this is set on both
+//  ends of the pipe, for outgoing messages only (sndhwm). The default HWM is
+//  1,000, on all versions of ZeroMQ. If the environment var ZSYS_ACTORHWM is
+//  defined, that provides the default. Note that a value of zero means no
+//  limit, i.e. infinite memory consumption.
+CZMQ_EXPORT void
+    zsys_set_pipehwm (size_t pipehwm);
+
+//  Return the HWM for zactor internal pipes.
+CZMQ_EXPORT size_t
+    zsys_pipehwm (void);
+
+//  Configure use of IPv6 for new zsock instances. By default sockets accept
+//  and make only IPv4 connections. When you enable IPv6, sockets will accept
+//  and connect to both IPv4 and IPv6 peers. You can override the setting on
+//  each zsock_t instance. The default is IPv4 only (ipv6 set to 0). If the
+//  environment variable ZSYS_IPV6 is defined (as 1 or 0), this provides the
+//  default. Note: has no effect on ZMQ v2.
+CZMQ_EXPORT void
+    zsys_set_ipv6 (int ipv6);
+
+//  Return use of IPv6 for zsock instances.
+CZMQ_EXPORT int
+    zsys_ipv6 (void);
+
+//  Set network interface name to use for broadcasts, particularly zbeacon.
+//  This lets the interface be configured for test environments where required.
+//  For example, on Mac OS X, zbeacon cannot bind to 255.255.255.255 which is
+//  the default when there is no specified interface. If the environment
+//  variable ZSYS_INTERFACE is set, use that as the default interface name.
+//  Setting the interface to "*" means "use all available interfaces".
+CZMQ_EXPORT void
+    zsys_set_interface (const char *value);
+
+//  Return network interface to use for broadcasts, or "" if none was set.
+CZMQ_EXPORT const char *
+    zsys_interface (void);
+
+//  Set IPv6 address to use zbeacon socket, particularly for receiving zbeacon.
+//  This needs to be set IPv6 is enabled as IPv6 can have multiple addresses
+//  on a given interface. If the environment variable ZSYS_IPV6_ADDRESS is set,
+//  use that as the default IPv6 address.
+CZMQ_EXPORT void
+    zsys_set_ipv6_address (const char *value);
+
+//  Return IPv6 address to use for zbeacon reception, or "" if none was set.
+CZMQ_EXPORT const char *
+    zsys_ipv6_address (void);
+
+//  Set IPv6 milticast address to use for sending zbeacon messages. This needs
+//  to be set if IPv6 is enabled. If the environment variable
+//  ZSYS_IPV6_MCAST_ADDRESS is set, use that as the default IPv6 multicast
+//  address.
+CZMQ_EXPORT void
+    zsys_set_ipv6_mcast_address (const char *value);
+
+//  Return IPv6 multicast address to use for sending zbeacon, or "" if none was
+//  set.
+CZMQ_EXPORT const char *
+    zsys_ipv6_mcast_address (void);
+
+//  Configure the automatic use of pre-allocated FDs when creating new sockets.
+//  If 0 (default), nothing will happen. Else, when a new socket is bound, the
+//  system API will be used to check if an existing pre-allocated FD with a
+//  matching port (if TCP) or path (if IPC) exists, and if it does it will be
+//  set via the ZMQ_USE_FD socket option so that the library will use it
+//  instead of creating a new socket.
+CZMQ_EXPORT void
+    zsys_set_auto_use_fd (int auto_use_fd);
+
+//  Return use of automatic pre-allocated FDs for zsock instances.
+CZMQ_EXPORT int
+    zsys_auto_use_fd (void);
+
+//  Set log identity, which is a string that prefixes all log messages sent
+//  by this process. The log identity defaults to the environment variable
+//  ZSYS_LOGIDENT, if that is set.
+CZMQ_EXPORT void
+    zsys_set_logident (const char *value);
+
+//  Set stream to receive log traffic. By default, log traffic is sent to
+//  stdout. If you set the stream to NULL, no stream will receive the log
+//  traffic (it may still be sent to the system facility).
+CZMQ_EXPORT void
+    zsys_set_logstream (FILE *stream);
+    
+//  Sends log output to a PUB socket bound to the specified endpoint. To
+//  collect such log output, create a SUB socket, subscribe to the traffic
+//  you care about, and connect to the endpoint. Log traffic is sent as a
+//  single string frame, in the same format as when sent to stdout. The
+//  log system supports a single sender; multiple calls to this method will
+//  bind the same sender to multiple endpoints. To disable the sender, call
+//  this method with a null argument.
+CZMQ_EXPORT void
+    zsys_set_logsender (const char *endpoint);
+
+//  Enable or disable logging to the system facility (syslog on POSIX boxes,
+//  event log on Windows). By default this is disabled.
+CZMQ_EXPORT void
+    zsys_set_logsystem (bool logsystem);
+    
+//  Log error condition - highest priority
+CZMQ_EXPORT void
+    zsys_error (const char *format, ...);
+
+//  Log warning condition - high priority
+CZMQ_EXPORT void
+    zsys_warning (const char *format, ...);
+    
+//  Log normal, but significant, condition - normal priority
+CZMQ_EXPORT void
+    zsys_notice (const char *format, ...);
+    
+//  Log informational message - low priority
+CZMQ_EXPORT void
+    zsys_info (const char *format, ...);
+    
+//  Log debug-level message - lowest priority
+CZMQ_EXPORT void
+    zsys_debug (const char *format, ...);
+
+//  Self test of this class
+CZMQ_EXPORT void
+    zsys_test (bool verbose);
+    
+//  Global signal indicator, TRUE when user presses Ctrl-C or the process
+//  gets a SIGTERM signal.
+CZMQ_EXPORT extern volatile int zsys_interrupted;
+//  Deprecated name for this variable
+CZMQ_EXPORT extern volatile int zctx_interrupted;
+//  @end
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

data/vendor/local/include/zthread.h

@@ -0,0 +1,50 @@
+/*  =========================================================================
+    zthread - working with system threads (deprecated)
+
+    Copyright (c) the Contributors as noted in the AUTHORS file.
+    This file is part of CZMQ, the high-level C binding for 0MQ:
+    http://czmq.zeromq.org.
+
+    This Source Code Form is subject to the terms of the Mozilla Public
+    License, v. 2.0. If a copy of the MPL was not distributed with this
+    file, You can obtain one at http://mozilla.org/MPL/2.0/.
+    =========================================================================
+*/
+
+#ifndef __ZTHREAD_H_INCLUDED__
+#define __ZTHREAD_H_INCLUDED__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//  @interface
+//  Detached threads follow POSIX pthreads API
+typedef void *(zthread_detached_fn) (void *args);
+
+//  Attached threads get context and pipe from parent
+typedef void (zthread_attached_fn) (void *args, zctx_t *ctx, void *pipe);
+
+//  Create a detached thread. A detached thread operates autonomously
+//  and is used to simulate a separate process. It gets no ctx, and no
+//  pipe.
+CZMQ_EXPORT int
+    zthread_new (zthread_detached_fn *thread_fn, void *args);
+
+//  Create an attached thread. An attached thread gets a ctx and a PAIR
+//  pipe back to its parent. It must monitor its pipe, and exit if the
+//  pipe becomes unreadable. Do not destroy the ctx, the thread does this
+//  automatically when it ends.
+CZMQ_EXPORT void *
+    zthread_fork (zctx_t *ctx, zthread_attached_fn *thread_fn, void *args);
+
+//  Self test of this class
+CZMQ_EXPORT void
+    zthread_test (bool verbose);
+//  @end
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

data/vendor/local/include/ztimerset.h

@@ -0,0 +1,90 @@
+/*  =========================================================================
+    ztimerset - timer set
+
+    Copyright (c) the Contributors as noted in the AUTHORS file.
+    This file is part of CZMQ, the high-level C binding for 0MQ:
+    http://czmq.zeromq.org.
+
+    This Source Code Form is subject to the terms of the Mozilla Public
+    License, v. 2.0. If a copy of the MPL was not distributed with this
+    file, You can obtain one at http://mozilla.org/MPL/2.0/.
+    =========================================================================
+*/
+
+#ifndef ZTIMERSET_H_INCLUDED
+#define ZTIMERSET_H_INCLUDED
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//  @warning THE FOLLOWING @INTERFACE BLOCK IS AUTO-GENERATED BY ZPROJECT
+//  @warning Please edit the model at "api/ztimerset.api" to make changes.
+//  @interface
+//  This is a draft class, and may change without notice. It is disabled in
+//  stable builds by default. If you use this in applications, please ask
+//  for it to be pushed to stable state. Use --enable-drafts to enable.
+#ifdef CZMQ_BUILD_DRAFT_API
+// Callback function for timer event.
+typedef void (ztimerset_fn) (
+    int timer_id, void *arg);
+
+//  *** Draft method, for development use, may change without warning ***
+//  Create new timer set.
+CZMQ_EXPORT ztimerset_t *
+    ztimerset_new (void);
+
+//  *** Draft method, for development use, may change without warning ***
+//  Destroy a timer set
+CZMQ_EXPORT void
+    ztimerset_destroy (ztimerset_t **self_p);
+
+//  *** Draft method, for development use, may change without warning ***
+//  Add a timer to the set. Returns timer id if OK, -1 on failure.
+CZMQ_EXPORT int
+    ztimerset_add (ztimerset_t *self, size_t interval, ztimerset_fn handler, void *arg);
+
+//  *** Draft method, for development use, may change without warning ***
+//  Cancel a timer. Returns 0 if OK, -1 on failure.
+CZMQ_EXPORT int
+    ztimerset_cancel (ztimerset_t *self, int timer_id);
+
+//  *** Draft method, for development use, may change without warning ***
+//  Set timer interval. Returns 0 if OK, -1 on failure.                                    
+//  This method is slow, canceling the timer and adding a new one yield better performance.
+CZMQ_EXPORT int
+    ztimerset_set_interval (ztimerset_t *self, int timer_id, size_t interval);
+
+//  *** Draft method, for development use, may change without warning ***
+//  Reset timer to start interval counting from current time. Returns 0 if OK, -1 on failure.
+//  This method is slow, canceling the timer and adding a new one yield better performance.  
+CZMQ_EXPORT int
+    ztimerset_reset (ztimerset_t *self, int timer_id);
+
+//  *** Draft method, for development use, may change without warning ***
+//  Return the time until the next interval.                        
+//  Should be used as timeout parameter for the zpoller wait method.
+//  The timeout is in msec.                                         
+CZMQ_EXPORT int
+    ztimerset_timeout (ztimerset_t *self);
+
+//  *** Draft method, for development use, may change without warning ***
+//  Invoke callback function of all timers which their interval has elapsed.
+//  Should be call after zpoller wait method.                               
+//  Returns 0 if OK, -1 on failure.                                         
+CZMQ_EXPORT int
+    ztimerset_execute (ztimerset_t *self);
+
+//  *** Draft method, for development use, may change without warning ***
+//  Self test of this class.
+CZMQ_EXPORT void
+    ztimerset_test (bool verbose);
+
+#endif // CZMQ_BUILD_DRAFT_API
+//  @end
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif