cypress-on-rails 1.16.0 → 1.18.0

data/specs_e2e/rails_4_2/config/environments/production.rb

@@ -1,64 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like
-  # NGINX, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
-
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
-
-  # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-end

data/specs_e2e/rails_4_2/config/environments/test.rb

@@ -1,42 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = ENV['CI'].present?
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure static file server for tests with Cache-Control for performance.
-  config.serve_static_files   = true
-  config.static_cache_control = 'public, max-age=3600'
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Randomize the order test cases are executed.
-  config.active_support.test_order = :random
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/specs_e2e/rails_4_2/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/specs_e2e/rails_4_2/config/initializers/cookies_serializer.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.action_dispatch.cookies_serializer = :json

data/specs_e2e/rails_4_2/config/initializers/session_store.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.session_store :cookie_store, key: '_rails_4_2_session'

data/specs_e2e/rails_4_2/config/initializers/to_time_preserves_timezone.rb

@@ -1,10 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Preserve the timezone of the receiver when calling to `to_time`.
-# Ruby 2.4 will change the behavior of `to_time` to preserve the timezone
-# when converting to an instance of `Time` instead of the previous behavior
-# of converting to the local system timezone.
-#
-# Rails 5.0 introduced this config option so that apps made with earlier
-# versions of Rails are not affected when upgrading.
-ActiveSupport.to_time_preserves_timezone = true

data/specs_e2e/rails_4_2/config/initializers/wrap_parameters.rb

@@ -1,9 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# This file contains settings for ActionController::ParamsWrapper which
-# is enabled by default.
-
-# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
-ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
-end

data/specs_e2e/rails_4_2/config/locales/en.yml

@@ -1,23 +0,0 @@
-# Files in the config/locales directory are used for internationalization
-# and are automatically loaded by Rails. If you want to use locales other
-# than English, add the necessary files in this directory.
-#
-# To use the locales, use `I18n.t`:
-#
-#     I18n.t 'hello'
-#
-# In views, this is aliased to just `t`:
-#
-#     <%= t('hello') %>
-#
-# To use a different locale, set it with `I18n.locale`:
-#
-#     I18n.locale = :es
-#
-# This would use the information in config/locales/es.yml.
-#
-# To learn more, please read the Rails Internationalization guide
-# available at http://guides.rubyonrails.org/i18n.html.
-
-en:
-  hello: "Hello world"

data/specs_e2e/rails_4_2/config/routes.rb

@@ -1,61 +0,0 @@
-Rails.application.routes.draw do
-  get 'using_vcr/index'
-
-  # The priority is based upon order of creation: first created -> highest priority.
-  # See how all your routes lay out with "rake routes".
-
-  # You can have the root of your site routed with "root"
-  root 'welcome#index'
-
-  get 'using_vcr/:action', to: 'using_vcr#:action'
-
-
-  # Example of regular route:
-  #   get 'products/:id' => 'catalog#view'
-
-  # Example of named route that can be invoked with purchase_url(id: product.id)
-  #   get 'products/:id/purchase' => 'catalog#purchase', as: :purchase
-
-  # Example resource route (maps HTTP verbs to controller actions automatically):
-  #   resources :products
-
-  # Example resource route with options:
-  #   resources :products do
-  #     member do
-  #       get 'short'
-  #       post 'toggle'
-  #     end
-  #
-  #     collection do
-  #       get 'sold'
-  #     end
-  #   end
-
-  # Example resource route with sub-resources:
-  #   resources :products do
-  #     resources :comments, :sales
-  #     resource :seller
-  #   end
-
-  # Example resource route with more complex sub-resources:
-  #   resources :products do
-  #     resources :comments
-  #     resources :sales do
-  #       get 'recent', on: :collection
-  #     end
-  #   end
-
-  # Example resource route with concerns:
-  #   concern :toggleable do
-  #     post 'toggle'
-  #   end
-  #   resources :posts, concerns: :toggleable
-  #   resources :photos, concerns: :toggleable
-
-  # Example resource route within a namespace:
-  #   namespace :admin do
-  #     # Directs /admin/products/* to Admin::ProductsController
-  #     # (app/controllers/admin/products_controller.rb)
-  #     resources :products
-  #   end
-end

data/specs_e2e/rails_4_2/config/secrets.yml

@@ -1,22 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Your secret key is used for verifying the integrity of signed cookies.
-# If you change this key, all old signed cookies will become invalid!
-
-# Make sure the secret is at least 30 characters and all random,
-# no regular words or you'll be exposed to dictionary attacks.
-# You can use `rake secret` to generate a secure secret key.
-
-# Make sure the secrets in this file are kept private
-# if you're sharing your code publicly.
-
-development:
-  secret_key_base: adfe5a1fe4a9da0cd84475395507664689b981c8059a1e3dabc7ad159a89a31d41e54811832c5a70bce77529ad3d601fd4f4051c7448349d52b2becd84d07d17
-
-test:
-  secret_key_base: 546b4b752cc98c06016597d26714a81e705e8c18de9a1f94166a042bc170da21a4a905205c67b82de423b6648b779980ee161a61f820e172b88dc2dafc0abbeb
-
-# Do not keep production secrets in the repository,
-# instead read values from the environment.
-production:
-  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/specs_e2e/rails_4_2/package.json

@@ -1,10 +0,0 @@
-{
-  "name": "rails_4_2",
-  "version": "1.0.0",
-  "main": "index.js",
-  "license": "MIT",
-  "devDependencies": {
-    "cypress": "^10.0.2",
-    "cypress-on-rails": "file:../../plugin"
-  }
-}

data/specs_e2e/rails_4_2/public/robots.txt

@@ -1,5 +0,0 @@
-# See http://www.robotstxt.org/robotstxt.html for documentation on how to use the robots.txt file
-#
-# To ban all spiders from the entire site uncomment the next two lines:
-# User-agent: *
-# Disallow: /

data/specs_e2e/rails_4_2/test.sh

@@ -1,44 +0,0 @@
-#!/usr/bin/env bash
-set -eo pipefail
-
-echo '--- testing rails 4.2'
-
-echo '-- setting environment'
-export DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-export RAILS_ENV=test
-export BUNDLE_GEMFILE="$DIR/Gemfile"
-cd $DIR
-
-echo '-- bundle install'
-gem install bundler -v "~> 1.0" --conservative
-bundle --version
-bundle install --quiet --gemfile="$DIR/Gemfile" --retry 2 --path vendor/bundle
-
-echo '-- cypress and playwright install'
-bundle exec ./bin/rails g cypress_on_rails:install --install_folder=spec/e2e --cypress_folder=spec/cypress --playwright_folder=spec/playwright --install_cypress --install_playwright --experimental --install_with=npm --skip
-rm -vf spec/cypress/e2e/rails_examples/advance_factory_bot.cy.js
-
-echo '-- start rails server'
-# make sure the server is not running
-(kill -9 `cat tmp/pids/server.pid` || true )
-
-bundle exec ./bin/rails server -p 5017 -e test &
-sleep 5 # give rails a chance to start up correctly
-
-echo '-- cypress run'
-cp -fv ../cypress.config.js spec/
-# if [ -z $CYPRESS_RECORD_KEY ]
-# then
-#     npx cypress run -P ./spec
-# else
-    npx cypress run -P ./spec --record
-# fi
-
-echo '-- playwright run'
-cp -fv ../playwright.config.js spec/
-cd spec
-npx playwright install-deps
-npx playwright test spec/playwright/e2e/
-
-echo '-- stop rails server'
-kill -9 `cat tmp/pids/server.pid` || true

data/specs_e2e/rails_5_2/Gemfile

@@ -1,15 +0,0 @@
-source 'https://rubygems.org'
-git_source(:github) { |repo| "https://github.com/#{repo}.git" }
-
-# Bundle edge Rails instead: gem 'rails', github: 'rails/rails'
-gem 'rails', '~> 5.2.0'
-gem 'sprockets', '~> 3.7.2'
-gem 'sqlite3', '~> 1.3.6'
-
-# Reduces boot times through caching; required in config/boot.rb
-gem 'bootsnap', '>= 1.1.0', require: false
-
-group :development, :test do
-  gem 'database_cleaner'
-  gem 'cypress-on-rails', path: '../../'
-end

data/specs_e2e/rails_5_2/app/assets/javascripts/posts.js

@@ -1,2 +0,0 @@
-// Place all the behaviors and hooks related to the matching controller here.
-// All this logic will automatically be available in application.js.

data/specs_e2e/rails_5_2/app/assets/stylesheets/posts.css

@@ -1,4 +0,0 @@
-/*
-  Place all the styles related to the matching controller here.
-  They will automatically be included in application.css.
-*/

data/specs_e2e/rails_5_2/app/assets/stylesheets/scaffold.css

@@ -1,80 +0,0 @@
-body {
-  background-color: #fff;
-  color: #333;
-  margin: 33px;
-}
-
-body, p, ol, ul, td {
-  font-family: verdana, arial, helvetica, sans-serif;
-  font-size: 13px;
-  line-height: 18px;
-}
-
-pre {
-  background-color: #eee;
-  padding: 10px;
-  font-size: 11px;
-}
-
-a {
-  color: #000;
-}
-
-a:visited {
-  color: #666;
-}
-
-a:hover {
-  color: #fff;
-  background-color: #000;
-}
-
-th {
-  padding-bottom: 5px;
-}
-
-td {
-  padding: 0 5px 7px;
-}
-
-div.field,
-div.actions {
-  margin-bottom: 10px;
-}
-
-#notice {
-  color: green;
-}
-
-.field_with_errors {
-  padding: 2px;
-  background-color: red;
-  display: table;
-}
-
-#error_explanation {
-  width: 450px;
-  border: 2px solid red;
-  padding: 7px 7px 0;
-  margin-bottom: 20px;
-  background-color: #f0f0f0;
-}
-
-#error_explanation h2 {
-  text-align: left;
-  font-weight: bold;
-  padding: 5px 5px 5px 15px;
-  font-size: 12px;
-  margin: -7px -7px 0;
-  background-color: #c00;
-  color: #fff;
-}
-
-#error_explanation ul li {
-  font-size: 12px;
-  list-style: square;
-}
-
-label {
-  display: block;
-}

data/specs_e2e/rails_5_2/app/jobs/application_job.rb

@@ -1,2 +0,0 @@
-class ApplicationJob < ActiveJob::Base
-end

data/specs_e2e/rails_5_2/app/views/welcome/index.html.erb

@@ -1,5 +0,0 @@
-<h1>Welcome</h1>
-<p>Posts:</p>
-<% Post.all.each do |post| %>
-  <p><%= post.inspect %></p>
-<% end %>

data/specs_e2e/rails_5_2/bin/bundle

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../Gemfile', __dir__)
-load Gem.bin_path('bundler', 'bundle')

data/specs_e2e/rails_5_2/bin/rails

@@ -1,4 +0,0 @@
-#!/usr/bin/env ruby
-APP_PATH = File.expand_path('../config/application', __dir__)
-require_relative '../config/boot'
-require 'rails/commands'

data/specs_e2e/rails_5_2/bin/rake

@@ -1,4 +0,0 @@
-#!/usr/bin/env ruby
-require_relative '../config/boot'
-require 'rake'
-Rake.application.run

data/specs_e2e/rails_5_2/bin/update

@@ -1,25 +0,0 @@
-#!/usr/bin/env ruby
-require 'fileutils'
-include FileUtils
-
-# path to your application root.
-APP_ROOT = File.expand_path('..', __dir__)
-
-def system!(*args)
-  system(*args) || abort("\n== Command #{args} failed ==")
-end
-
-chdir APP_ROOT do
-  # This script is a way to update your development environment automatically.
-  # Add necessary update steps to this file.
-
-  puts '== Installing dependencies =='
-  system! 'gem install bundler --conservative'
-  system('bundle check') || system!('bundle install')
-
-  puts "\n== Removing old logs and tempfiles =="
-  system! 'bin/rails log:clear tmp:clear'
-
-  puts "\n== Restarting application server =="
-  system! 'bin/rails restart'
-end

data/specs_e2e/rails_5_2/config/application.rb

@@ -1,33 +0,0 @@
-require_relative 'boot'
-
-require "rails"
-# Pick the frameworks you want:
-require "active_model/railtie"
-require "active_job/railtie"
-require "active_record/railtie"
-# require "active_storage/engine"
-require "action_controller/railtie"
-# require "action_mailer/railtie"
-require "action_view/railtie"
-# require "action_cable/engine"
-# require "sprockets/railtie"
-require "rails/test_unit/railtie"
-
-# Require the gems listed in Gemfile, including any gems
-# you've limited to :test, :development, or :production.
-Bundler.require(*Rails.groups)
-
-module Rails52
-  class Application < Rails::Application
-    # Initialize configuration defaults for originally generated Rails version.
-    config.load_defaults 5.2
-
-    # Settings in config/environments/* take precedence over those specified here.
-    # Application configuration can go into files in config/initializers
-    # -- all .rb files in that directory are automatically loaded after loading
-    # the framework and any gems in your application.
-
-    # Don't generate system test files.
-    config.generators.system_tests = nil
-  end
-end

data/specs_e2e/rails_5_2/config/boot.rb

@@ -1,4 +0,0 @@
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../Gemfile', __dir__)
-
-require 'bundler/setup' # Set up gems listed in the Gemfile.
-require 'bootsnap/setup' # Speed up boot time by caching expensive operations.

data/specs_e2e/rails_5_2/config/credentials.yml.enc

@@ -1 +0,0 @@
-PU4fysLVBMDfEaSi455771OWoJSW6cjWLRUnm6QdvQbF5MY212853Tu6bbtj+GbCs9xIv8qWO2Krx2FNXKVYHvdwVECp59AM/DIV47VSxtkeG9492CsuXZoiUM4SGQETwJ4zTpTParXX6HhAuOdE9rrVGXUBE1LBODGGA/qobk3wfSJCvOQHidEkKk6NvTPs/Hym4OxTJJiyM1zbE/uYuM0g3xBm96fKPVBJ99yJdGlysWqRs7c36IatC+8SQSJi1dq3KiHdEBSlFwj8HheoF3mpo/HNmJQpfjTDmujgiHVO6zWpyHJsp4TzRqyvb6ebQo67gXe3HN6NlB9GGki/cPHIimVWcunn/3h3B666V1NHgfq+cCys0Lcs+fN7RBc0uLh7Lbk08n/ijVBQkgu1kiU0eobtUykb3az7--V52ELknEN7jluVO5--YW2QRZx+/1IH9Sf9iLHGsA==

data/specs_e2e/rails_5_2/config/environments/production.rb

@@ -1,68 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
-  # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
-  # config.require_master_key = true
-
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
-
-  # Prepend all log lines with the following tags.
-  config.log_tags = [ :request_id ]
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Use a real queuing backend for Active Job (and separate queues per environment)
-  # config.active_job.queue_adapter     = :resque
-  # config.active_job.queue_name_prefix = "rails_5_2_#{Rails.env}"
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Use a different logger for distributed setups.
-  # require 'syslog/logger'
-  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
-
-  if ENV["RAILS_LOG_TO_STDOUT"].present?
-    logger           = ActiveSupport::Logger.new(STDOUT)
-    logger.formatter = config.log_formatter
-    config.logger    = ActiveSupport::TaggedLogging.new(logger)
-  end
-end

data/specs_e2e/rails_5_2/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/specs_e2e/rails_5_2/config/initializers/filter_parameter_logging.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]

data/specs_e2e/rails_5_2/config/initializers/mime_types.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf

data/specs_e2e/rails_5_2/config/initializers/wrap_parameters.rb

@@ -1,9 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# This file contains settings for ActionController::ParamsWrapper which
-# is enabled by default.
-
-# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
-ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json]
-end

data/specs_e2e/rails_5_2/config/master.key

@@ -1 +0,0 @@
-42b8a9ee98524d2ae0edc4afaaee9d07

data/specs_e2e/rails_5_2/public/robots.txt

@@ -1 +0,0 @@
-# See http://www.robotstxt.org/robotstxt.html for documentation on how to use the robots.txt file