RubyGems - cybrid_api_organization_ruby - Versions diffs - 0.94.31 → 0.94.33 - Mend

cybrid_api_organization_ruby 0.94.31 → 0.94.33

Files changed (900) hide show

data/vendor/bundle/ruby/3.2.0/gems/ffi-1.15.5/ext/ffi_c/libffi/include/ffi_common.h DELETED Viewed

@@ -1,153 +0,0 @@
-/* -----------------------------------------------------------------------
-   ffi_common.h - Copyright (C) 2011, 2012, 2013  Anthony Green
-                  Copyright (C) 2007  Free Software Foundation, Inc
-                  Copyright (c) 1996  Red Hat, Inc.
-   Common internal definitions and macros. Only necessary for building
-   libffi.
-   ----------------------------------------------------------------------- */
-#ifndef FFI_COMMON_H
-#define FFI_COMMON_H
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include <fficonfig.h>
-/* Do not move this. Some versions of AIX are very picky about where
-   this is positioned. */
-#ifdef __GNUC__
-# if HAVE_ALLOCA_H
-#  include <alloca.h>
-# else
-  /* mingw64 defines this already in malloc.h. */
-#  ifndef alloca
-#    define alloca __builtin_alloca
-#  endif
-# endif
-# define MAYBE_UNUSED __attribute__((__unused__))
-#else
-# define MAYBE_UNUSED
-# if HAVE_ALLOCA_H
-#  include <alloca.h>
-# else
-#  ifdef _AIX
-#   pragma alloca
-#  else
-#   ifndef alloca /* predefined by HP cc +Olibcalls */
-#    ifdef _MSC_VER
-#     define alloca _alloca
-#    else
-char *alloca ();
-#   endif
-#  endif
-# endif
-# endif
-#endif
-/* Check for the existence of memcpy. */
-#if STDC_HEADERS
-# include <string.h>
-#else
-# ifndef HAVE_MEMCPY
-#  define memcpy(d, s, n) bcopy ((s), (d), (n))
-# endif
-#endif
-#if defined(FFI_DEBUG)
-#include <stdio.h>
-#endif
-#ifdef FFI_DEBUG
-void ffi_assert(char *expr, char *file, int line);
-void ffi_stop_here(void);
-void ffi_type_test(ffi_type *a, char *file, int line);
-#define FFI_ASSERT(x) ((x) ? (void)0 : ffi_assert(#x, __FILE__,__LINE__))
-#define FFI_ASSERT_AT(x, f, l) ((x) ? 0 : ffi_assert(#x, (f), (l)))
-#define FFI_ASSERT_VALID_TYPE(x) ffi_type_test (x, __FILE__, __LINE__)
-#else
-#define FFI_ASSERT(x)
-#define FFI_ASSERT_AT(x, f, l)
-#define FFI_ASSERT_VALID_TYPE(x)
-#endif
-/* v cast to size_t and aligned up to a multiple of a */
-#define FFI_ALIGN(v, a)  (((((size_t) (v))-1) | ((a)-1))+1)
-/* v cast to size_t and aligned down to a multiple of a */
-#define FFI_ALIGN_DOWN(v, a) (((size_t) (v)) & -a)
-/* Perform machine dependent cif processing */
-ffi_status ffi_prep_cif_machdep(ffi_cif *cif);
-ffi_status ffi_prep_cif_machdep_var(ffi_cif *cif,
-	 unsigned int nfixedargs, unsigned int ntotalargs);
-#if HAVE_LONG_DOUBLE_VARIANT
-/* Used to adjust size/alignment of ffi types.  */
-void ffi_prep_types (ffi_abi abi);
-#endif
-/* Used internally, but overridden by some architectures */
-ffi_status ffi_prep_cif_core(ffi_cif *cif,
-			     ffi_abi abi,
-			     unsigned int isvariadic,
-			     unsigned int nfixedargs,
-			     unsigned int ntotalargs,
-			     ffi_type *rtype,
-			     ffi_type **atypes);
-/* Translate a data pointer to a code pointer.  Needed for closures on
-   some targets.  */
-void *ffi_data_to_code_pointer (void *data) FFI_HIDDEN;
-/* Extended cif, used in callback from assembly routine */
-typedef struct
-{
-  ffi_cif *cif;
-  void *rvalue;
-  void **avalue;
-} extended_cif;
-/* Terse sized type definitions.  */
-#if defined(_MSC_VER) || defined(__sgi) || defined(__SUNPRO_C)
-typedef unsigned char UINT8;
-typedef signed char   SINT8;
-typedef unsigned short UINT16;
-typedef signed short   SINT16;
-typedef unsigned int UINT32;
-typedef signed int   SINT32;
-# ifdef _MSC_VER
-typedef unsigned __int64 UINT64;
-typedef signed __int64   SINT64;
-# else
-# include <inttypes.h>
-typedef uint64_t UINT64;
-typedef int64_t  SINT64;
-# endif
-#else
-typedef unsigned int UINT8  __attribute__((__mode__(__QI__)));
-typedef signed int   SINT8  __attribute__((__mode__(__QI__)));
-typedef unsigned int UINT16 __attribute__((__mode__(__HI__)));
-typedef signed int   SINT16 __attribute__((__mode__(__HI__)));
-typedef unsigned int UINT32 __attribute__((__mode__(__SI__)));
-typedef signed int   SINT32 __attribute__((__mode__(__SI__)));
-typedef unsigned int UINT64 __attribute__((__mode__(__DI__)));
-typedef signed int   SINT64 __attribute__((__mode__(__DI__)));
-#endif
-typedef float FLOAT32;
-#ifndef __GNUC__
-#define __builtin_expect(x, expected_value) (x)
-#endif
-#define LIKELY(x)    __builtin_expect(!!(x),1)
-#define UNLIKELY(x)  __builtin_expect((x)!=0,0)
-#ifdef __cplusplus
-}
-#endif
-#endif

data/vendor/bundle/ruby/3.2.0/gems/ffi-1.15.5/ext/ffi_c/libffi/install-sh DELETED Viewed

@@ -1,518 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-scriptversion=2018-03-11.20; # UTC
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-tab='	'
-nl='
-'
-IFS=" $tab$nl"
-# Set DOITPROG to "echo" to test this script.
-doit=${DOITPROG-}
-doit_exec=${doit:-exec}
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-posix_mkdir=
-# Desired mode of installed file.
-mode=0755
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-src=
-dst=
-dir_arg=
-dst_arg=
-copy_on_change=false
-is_target_a_directory=possibly
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-    -C) copy_on_change=true;;
-    -d) dir_arg=true;;
-    -g) chgrpcmd="$chgrpprog $2"
-        shift;;
-    --help) echo "$usage"; exit $?;;
-    -m) mode=$2
-        case $mode in
-          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
-            echo "$0: invalid mode: $mode" >&2
-            exit 1;;
-        esac
-        shift;;
-    -o) chowncmd="$chownprog $2"
-        shift;;
-    -s) stripcmd=$stripprog;;
-    -t)
-        is_target_a_directory=always
-        dst_arg=$2
-        # Protect names problematic for 'test' and other utilities.
-        case $dst_arg in
-          -* | [=\(\)!]) dst_arg=./$dst_arg;;
-        esac
-        shift;;
-    -T) is_target_a_directory=never;;
-    --version) echo "$0 $scriptversion"; exit $?;;
-    --) shift
-        break;;
-    -*) echo "$0: invalid option: $1" >&2
-        exit 1;;
-    *)  break;;
-  esac
-  shift
-done
-# We allow the use of options -d and -T together, by making -d
-# take the precedence; this is for compatibility with GNU install.
-if test -n "$dir_arg"; then
-  if test -n "$dst_arg"; then
-    echo "$0: target directory not allowed when installing a directory." >&2
-    exit 1
-  fi
-fi
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-    # Protect names problematic for 'test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
-  done
-fi
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call 'install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-if test -z "$dir_arg"; then
-  if test $# -gt 1 || test "$is_target_a_directory" = always; then
-    if test ! -d "$dst_arg"; then
-      echo "$0: $dst_arg: Is not a directory." >&2
-      exit 1
-    fi
-  fi
-fi
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-    *[0-7])
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-for src
-do
-  # Protect names problematic for 'test' and other utilities.
-  case $src in
-    -* | [=\(\)!]) src=./$src;;
-  esac
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-    dst=$dst_arg
-    # If destination is a directory, append the input filename.
-    if test -d "$dst"; then
-      if test "$is_target_a_directory" = never; then
-        echo "$0: $dst_arg: Is a directory" >&2
-        exit 1
-      fi
-      dstdir=$dst
-      dstbase=`basename "$src"`
-      case $dst in
-	*/) dst=$dst$dstbase;;
-	*)  dst=$dst/$dstbase;;
-      esac
-      dstdir_status=0
-    else
-      dstdir=`dirname "$dst"`
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-  case $dstdir in
-    */) dstdirslash=$dstdir;;
-    *)  dstdirslash=$dstdir/;;
-  esac
-  obsolete_mkdir_used=false
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-        # Create intermediate dirs using mode 755 as modified by the umask.
-        # This is like FreeBSD 'install' as of 1997-10-28.
-        umask=`umask`
-        case $stripcmd.$umask in
-          # Optimize common cases.
-          *[2367][2367]) mkdir_umask=$umask;;
-          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-          *[0-7])
-            mkdir_umask=`expr $umask + 22 \
-              - $umask % 100 % 40 + $umask % 20 \
-              - $umask % 10 % 4 + $umask % 2
-            `;;
-          *) mkdir_umask=$umask,go-w;;
-        esac
-        # With -d, create the new directory with the user-specified mode.
-        # Otherwise, rely on $mkdir_umask.
-        if test -n "$dir_arg"; then
-          mkdir_mode=-m$mode
-        else
-          mkdir_mode=
-        fi
-        posix_mkdir=false
-        case $umask in
-          *[123567][0-7][0-7])
-            # POSIX mkdir -p sets u+wx bits regardless of umask, which
-            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-            ;;
-          *)
-            # Note that $RANDOM variable is not portable (e.g. dash);  Use it
-            # here however when possible just to lower collision chance.
-            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-            trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
-            # Because "mkdir -p" follows existing symlinks and we likely work
-            # directly in world-writeable /tmp, make sure that the '$tmpdir'
-            # directory is successfully created first before we actually test
-            # 'mkdir -p' feature.
-            if (umask $mkdir_umask &&
-                $mkdirprog $mkdir_mode "$tmpdir" &&
-                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
-            then
-              if test -z "$dir_arg" || {
-                   # Check for POSIX incompatibilities with -m.
-                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-                   # other-writable bit of parent directory when it shouldn't.
-                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-                   test_tmpdir="$tmpdir/a"
-                   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
-                   case $ls_ld_tmpdir in
-                     d????-?r-*) different_mode=700;;
-                     d????-?--*) different_mode=755;;
-                     *) false;;
-                   esac &&
-                   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
-                     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
-                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-                   }
-                 }
-              then posix_mkdir=:
-              fi
-              rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
-            else
-              # Remove any dirs left behind by ancient mkdir implementations.
-              rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
-            fi
-            trap '' 0;;
-        esac;;
-    esac
-    if
-      $posix_mkdir && (
-        umask $mkdir_umask &&
-        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-      case $dstdir in
-        /*) prefix='/';;
-        [-=\(\)!]*) prefix='./';;
-        *)  prefix='';;
-      esac
-      oIFS=$IFS
-      IFS=/
-      set -f
-      set fnord $dstdir
-      shift
-      set +f
-      IFS=$oIFS
-      prefixes=
-      for d
-      do
-        test X"$d" = X && continue
-        prefix=$prefix$d
-        if test -d "$prefix"; then
-          prefixes=
-        else
-          if $posix_mkdir; then
-            (umask=$mkdir_umask &&
-             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-            # Don't fail if two instances are running concurrently.
-            test -d "$prefix" || exit 1
-          else
-            case $prefix in
-              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-              *) qprefix=$prefix;;
-            esac
-            prefixes="$prefixes '$qprefix'"
-          fi
-        fi
-        prefix=$prefix/
-      done
-      if test -n "$prefixes"; then
-        # Don't fail if two instances are running concurrently.
-        (umask $mkdir_umask &&
-         eval "\$doit_exec \$mkdirprog $prefixes") ||
-          test -d "$dstdir" || exit 1
-        obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=${dstdirslash}_inst.$$_
-    rmtmp=${dstdirslash}_rm.$$_
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
-       set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       set +f &&
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-        # Now remove or move aside any old file at destination location.
-        # We try this two ways since rm can't unlink itself on some
-        # systems and the destination file might be busy for other
-        # reasons.  In this case, the final cleanup might fail but the new
-        # file should still install successfully.
-        {
-          test ! -f "$dst" ||
-          $doit $rmcmd -f "$dst" 2>/dev/null ||
-          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-          } ||
-          { echo "$0: cannot unlink or rename $dst" >&2
-            (exit 1); exit 1
-          }
-        } &&
-        # Now rename the file to the real destination.
-        $doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-    trap '' 0
-  fi
-done
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

data/vendor/bundle/ruby/3.2.0/gems/ffi-1.15.5/ext/ffi_c/libffi/libtool-version DELETED Viewed

@@ -1,29 +0,0 @@
-# This file is used to maintain libtool version info for libffi.  See
-# the libtool manual to understand the meaning of the fields.  This is
-# a separate file so that version updates don't involve re-running
-# automake.
-#
-# Here are a set of rules to help you update your library version
-# information:
-#
-# 1. Start with version information of `0:0:0' for each libtool library.
-#
-# 2. Update the version information only immediately before a public
-#    release of your software. More frequent updates are unnecessary,
-#    and only guarantee that the current interface number gets larger
-#    faster.
-#
-# 3. If the library source code has changed at all since the last
-#    update, then increment revision (`c:r:a' becomes `c:r+1:a').
-#
-# 4. If any interfaces have been added, removed, or changed since the
-#    last update, increment current, and set revision to 0.
-#
-# 5. If any interfaces have been added since the last public release,
-#    then increment age.
-#
-# 6. If any interfaces have been removed since the last public
-#    release, then set age to 0.
-#
-# CURRENT:REVISION:AGE
-9:0:1