cybersource_rest_client 0.0.8 → 0.0.9

data/lib/cybersource_rest_client/models/ptsv2payments_order_information_amount_details_surcharge.rb

@@ -14,10 +14,10 @@ require 'date'
 
 module CyberSource
   class Ptsv2paymentsOrderInformationAmountDetailsSurcharge
-    # The surcharge amount is included in the total transaction amount but is passed in a separate field to the issuer and acquirer for tracking. The issuer can provide information about the surcharge amount to the customer.  - Applicable only for CTV for Payouts. - CTV (<= 08)  For processor-specific information, see the surcharge_amount field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # The surcharge amount is included in the total transaction amount but is passed in a separate field to the issuer and acquirer for tracking. The issuer can provide information about the surcharge amount to the customer.  If the amount is positive, then it is a debit for the customer.\\ If the amount is negative, then it is a credit for the customer.  **NOTE**: This field is supported only for CyberSource through VisaNet (CtV) for Payouts. For CtV, the maximum string length is 8.  For processor-specific information, see the surcharge_amount field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :amount
 
-    # Description of this field is not available.
+    # Merchant-defined field for describing the surcharge amount.
     attr_accessor :description
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/ptsv2payments_order_information_amount_details_tax_details.rb

@@ -14,16 +14,16 @@ require 'date'
 
 module CyberSource
   class Ptsv2paymentsOrderInformationAmountDetailsTaxDetails
-    # This is used to determine what type of tax related data should be inclued under _taxDetails_ object. 
+    # This is used to determine what type of tax related data should be inclued under _taxDetails_ object.  Possible values:  - alternate  - local  - national  - vat 
     attr_accessor :type
 
-    # Please see below table for related decription based on above _type_ field.  | type      | amount description | |-----------|--------------------| | alternate | Total amount of alternate tax for the order. | | local     | Sales tax for the order. | | national  | National tax for the order. | | vat       | Total amount of VAT or other tax included in the order. | 
+    # Please see below table for related decription based on above _type_ field.  | type      | type description | |-----------|--------------------| | alternate | Total amount of alternate tax for the order. | | local     | Sales tax for the order. | | national  | National tax for the order. | | vat       | Total amount of VAT or other tax included in the order. | | other     | Other tax. | 
     attr_accessor :amount
 
     # Rate of VAT or other tax for the order.  Example 0.040 (=4%)  Valid range: 0.01 to 0.99 (1% to 99%, with only whole percentage values accepted; values with additional decimal places will be truncated) 
     attr_accessor :rate
 
-    # Type of tax being applied to the item. Possible values:  Below values are used by **RBS WorldPay Atlanta**, **FDC Nashville Global**, **Litle**   - 0000: unknown tax type  - 0001: federal/national sales tax  - 0002: state sales tax  - 0003: city sales tax  - 0004: local sales tax  - 0005: municipal sales tax  - 0006: other tax  - 0010: value-added tax  - 0011: goods and services tax  - 0012: provincial sales tax  - 0013: harmonized sales tax  - 0014: Quebec sales tax (QST)  - 0020: room tax  - 0021: occupancy tax  - 0022: energy tax  - Blank: Tax not supported on line item. 
+    # Type of tax being applied to the item. Possible values:  Below values are used by **RBS WorldPay Atlanta**, **FDC Nashville Global**, **Litle**   - 0000: unknown tax type  - 0001: federal/national sales tax  - 0002: state sales tax  - 0003: city sales tax  - 0004: local sales tax  - 0005: municipal sales tax  - 0006: other tax  - 0010: value-added tax (VAT)  - 0011: goods and services tax (GST)  - 0012: provincial sales tax  - 0013: harmonized sales tax  - 0014: Quebec sales tax (QST)  - 0020: room tax  - 0021: occupancy tax  - 0022: energy tax  - 0023: city tax  - 0024: county or parish sales tax  - 0025: county tax  - 0026: environment tax  - 0027: state and local sales tax (combined)  - Blank: Tax not supported on line item. 
     attr_accessor :code
 
     # Your tax ID number to use for the alternate tax amount. Required if you set alternate tax amount to any value, including zero. You may send this field without sending alternate tax amount. 
@@ -32,6 +32,9 @@ module CyberSource
     # The tax is applied. Valid value is `true` or `false`.
     attr_accessor :applied
 
+    # Code for exemption from sales and use tax. This field is a pass-through, which means that CyberSource does not verify the value or modify it in any way before sending it to the processor.  For possible values, see Exemption Status Values. See Numbered Elements.  Important For information about using this field, see Item-Level Tax Fields. 
+    attr_accessor :exemption_code
+
     class EnumAttributeValidator
       attr_reader :datatype
       attr_reader :allowable_values
@@ -62,7 +65,8 @@ module CyberSource
         :'rate' => :'rate',
         :'code' => :'code',
         :'tax_id' => :'taxId',
-        :'applied' => :'applied'
+        :'applied' => :'applied',
+        :'exemption_code' => :'exemptionCode'
       }
     end
 
@@ -74,7 +78,8 @@ module CyberSource
         :'rate' => :'String',
         :'code' => :'String',
         :'tax_id' => :'String',
-        :'applied' => :'BOOLEAN'
+        :'applied' => :'BOOLEAN',
+        :'exemption_code' => :'String'
       }
     end
 
@@ -109,6 +114,10 @@ module CyberSource
       if attributes.has_key?(:'applied')
         self.applied = attributes[:'applied']
       end
+
+      if attributes.has_key?(:'exemptionCode')
+        self.exemption_code = attributes[:'exemptionCode']
+      end
     end
 
     # Show invalid properties with the reasons. Usually used together with valid?
@@ -131,6 +140,10 @@ module CyberSource
         invalid_properties.push('invalid value for "tax_id", the character length must be smaller than or equal to 15.')
       end
 
+      if !@exemption_code.nil? && @exemption_code.to_s.length > 1
+        invalid_properties.push('invalid value for "exemption_code", the character length must be smaller than or equal to 1.')
+      end
+
       invalid_properties
     end
 
@@ -143,6 +156,7 @@ module CyberSource
       return false if !@rate.nil? && @rate.to_s.length > 6
       return false if !@code.nil? && @code.to_s.length > 4
       return false if !@tax_id.nil? && @tax_id.to_s.length > 15
+      return false if !@exemption_code.nil? && @exemption_code.to_s.length > 1
       true
     end
 
@@ -196,6 +210,16 @@ module CyberSource
       @tax_id = tax_id
     end
 
+    # Custom attribute writer method with validation
+    # @param [Object] exemption_code Value to be assigned
+    def exemption_code=(exemption_code)
+      if !exemption_code.nil? && exemption_code.to_s.length > 1
+        fail ArgumentError, 'invalid value for "exemption_code", the character length must be smaller than or equal to 1.'
+      end
+
+      @exemption_code = exemption_code
+    end
+
     # Checks equality by comparing each attribute.
     # @param [Object] Object to be compared
     def ==(o)
@@ -206,7 +230,8 @@ module CyberSource
           rate == o.rate &&
           code == o.code &&
           tax_id == o.tax_id &&
-          applied == o.applied
+          applied == o.applied &&
+          exemption_code == o.exemption_code
     end
 
     # @see the `==` method
@@ -218,7 +243,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [type, amount, rate, code, tax_id, applied].hash
+      [type, amount, rate, code, tax_id, applied, exemption_code].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/ptsv2payments_order_information_bill_to.rb

@@ -14,10 +14,10 @@ require 'date'
 
 module CyberSource
   class Ptsv2paymentsOrderInformationBillTo
-    # Customer’s first name. This name must be the same as the name on the card.  For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the customer_firstname field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Customer’s first name. This name must be the same as the name on the card.  **CyberSource Latin American Processing**\\ **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  **CyberSource through VisaNet**\\ Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **For Payouts**:\\ This field may be sent only for FDC Compass.  ccAuthService\\ (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the customer_firstname field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :first_name
 
-    # Customer’s last name. This name must be the same as the name on the card.  For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the customer_lastname field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Customer’s last name. This name must be the same as the name on the card.  **CyberSource Latin American Processing**\\ **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  **CyberSource through VisaNet**\\ Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  ccAuthService\\ (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  **For Payouts** : This field may be sent only for FDC Compass.  For processor-specific information, see the customer_lastname field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :last_name
 
     # Customer’s middle name. 
@@ -29,37 +29,36 @@ module CyberSource
     # Title. 
     attr_accessor :title
 
-    # Name of the customer’s company.  For processor-specific information, see the company_name field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :company
 
-    # First line of the billing street address as it appears on the credit card issuer’s records.  For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the bill_address1 field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # First line of the billing street address as it appears on the credit card issuer’s records.  **Atos** This field must not contain colons (:).  **CyberSource through VisaNet** **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **For Payouts**: This field may be sent only for FDC Compass.  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the bill_address1 field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :address1
 
-    # Additional address information.  For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the bill_address2 field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Additional address information.  For Payouts: This field may be sent only for FDC Compass.  **Atos** This field must not contain colons (:).  **Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions** This value is used for AVS.  **CyberSource through VisaNet** **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the bill_address2 field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :address2
 
-    # City of the billing address.  For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the bill_city field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # City of the billing address.  **Atos** This field must not contain colons (:).  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **For Payouts**: This field may be sent only for FDC Compass.  For processor-specific information, see the bill_city field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :locality
 
-    # State or province of the billing address. Use the State, Province, and Territory Codes for the United States and Canada.  For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the bill_state field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # State or province of the billing address. Use the State, Province, and Territory Codes for the United States and Canada.  For Payouts: This field may be sent only for FDC Compass.  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the bill_state field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :administrative_area
 
-    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  Example 12345-6789  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  Example A1B 2C3  For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the bill_zip field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  Example 12345-6789  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  Example A1B 2C3  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For Payouts: This field may be sent only for FDC Compass.  **American Express Direct** Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  **Atos** This field must not contain colons (:).  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the bill_zip field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :postal_code
 
-    # Country of the billing address. Use the two-character ISO Standard Country Codes.  For processor-specific information, see the bill_country field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Country of the billing address. Use the two-character ISO Standard Country Codes.  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the bill_country field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :country
 
     # Customer’s neighborhood, community, or region (a barrio in Brazil) within the city or municipality. This field is available only on **Cielo**. 
     attr_accessor :district
 
-    # Building number in the street address.  This field is supported only for:  - Cielo transactions.  - Redecard customer validation with CyberSource Latin American Processing. 
+    # Building number in the street address.  For example, if the street address is: Rua da Quitanda 187 then the building number is 187.  This field is supported only for:  - Cielo transactions.  - Redecard customer validation with CyberSource Latin American Processing. 
     attr_accessor :building_number
 
-    # Customer's email address, including the full domain name.  For processor-specific information, see the customer_email field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Customer's email address, including the full domain name.  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the customer_email field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
     attr_accessor :email
 
-    # Customer’s phone number.  For Payouts: This field may be sent only for FDC Compass.  CyberSource recommends that you include the country code when the order is from outside the U.S.  For processor-specific information, see the customer_phone field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Customer’s phone number.  For Payouts: This field may be sent only for FDC Compass.  CyberSource recommends that you include the country code when the order is from outside the U.S.  For processor-specific information, see the customer_phone field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks. 
     attr_accessor :phone_number
 
     # Customer's phone number type.  For Payouts: This field may be sent only for FDC Compass.  Possible Values -  * day * home * night * work 
@@ -118,7 +117,7 @@ module CyberSource
         :'middle_name' => :'String',
         :'name_suffix' => :'String',
         :'title' => :'String',
-        :'company' => :'String',
+        :'company' => :'Ptsv2paymentsOrderInformationBillToCompany',
         :'address1' => :'String',
         :'address2' => :'String',
         :'locality' => :'String',
@@ -234,10 +233,6 @@ module CyberSource
         invalid_properties.push('invalid value for "title", the character length must be smaller than or equal to 60.')
       end
 
-      if !@company.nil? && @company.to_s.length > 60
-        invalid_properties.push('invalid value for "company", the character length must be smaller than or equal to 60.')
-      end
-
       if !@address1.nil? && @address1.to_s.length > 60
         invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 60.')
       end
@@ -289,7 +284,6 @@ module CyberSource
       return false if !@middle_name.nil? && @middle_name.to_s.length > 60
       return false if !@name_suffix.nil? && @name_suffix.to_s.length > 60
       return false if !@title.nil? && @title.to_s.length > 60
-      return false if !@company.nil? && @company.to_s.length > 60
       return false if !@address1.nil? && @address1.to_s.length > 60
       return false if !@address2.nil? && @address2.to_s.length > 60
       return false if !@locality.nil? && @locality.to_s.length > 50
@@ -355,16 +349,6 @@ module CyberSource
       @title = title
     end
 
-    # Custom attribute writer method with validation
-    # @param [Object] company Value to be assigned
-    def company=(company)
-      if !company.nil? && company.to_s.length > 60
-        fail ArgumentError, 'invalid value for "company", the character length must be smaller than or equal to 60.'
-      end
-
-      @company = company
-    end
-
     # Custom attribute writer method with validation
     # @param [Object] address1 Value to be assigned
     def address1=(address1)

data/lib/cybersource_rest_client/models/ptsv2payments_order_information_bill_to_company.rb

@@ -0,0 +1,349 @@
+=begin
+#CyberSource Flex API
+
+#Simple PAN tokenization service
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class Ptsv2paymentsOrderInformationBillToCompany
+    # Name of the customer’s company.  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the company_name field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :name
+
+    # First line in the street address of the company purchasing the product.
+    attr_accessor :address1
+
+    # Additional address information for the company purchasing the product.
+    attr_accessor :address2
+
+    # City in the address of the company purchasing the product.
+    attr_accessor :locality
+
+    # State or province in the address of the company purchasing the product. Use the State, Province, and Territory Codes for the United States and Canada. 
+    attr_accessor :administrative_area
+
+    # Postal code in the address of the company purchasing the product. The postal code must consist of 5 to 9 digits.  When the company country is the U.S., the 9-digit postal code must follow this format: **[5 digits][dash][4 digits]** Example 12345-6789  When the company country is Canada, the 6-digit postal code must follow this format: **[alpha][numeric][alpha][space][numeric][alpha][numeric]** Example A1B 2C3 
+    attr_accessor :postal_code
+
+    # Country in the address of the company purchasing the product. Use the two-character ISO Standard Country Codes. 
+    attr_accessor :country
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'name' => :'name',
+        :'address1' => :'address1',
+        :'address2' => :'address2',
+        :'locality' => :'locality',
+        :'administrative_area' => :'administrativeArea',
+        :'postal_code' => :'postalCode',
+        :'country' => :'country'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'name' => :'String',
+        :'address1' => :'String',
+        :'address2' => :'String',
+        :'locality' => :'String',
+        :'administrative_area' => :'String',
+        :'postal_code' => :'String',
+        :'country' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'name')
+        self.name = attributes[:'name']
+      end
+
+      if attributes.has_key?(:'address1')
+        self.address1 = attributes[:'address1']
+      end
+
+      if attributes.has_key?(:'address2')
+        self.address2 = attributes[:'address2']
+      end
+
+      if attributes.has_key?(:'locality')
+        self.locality = attributes[:'locality']
+      end
+
+      if attributes.has_key?(:'administrativeArea')
+        self.administrative_area = attributes[:'administrativeArea']
+      end
+
+      if attributes.has_key?(:'postalCode')
+        self.postal_code = attributes[:'postalCode']
+      end
+
+      if attributes.has_key?(:'country')
+        self.country = attributes[:'country']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if !@name.nil? && @name.to_s.length > 60
+        invalid_properties.push('invalid value for "name", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@address1.nil? && @address1.to_s.length > 40
+        invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 40.')
+      end
+
+      if !@address2.nil? && @address2.to_s.length > 40
+        invalid_properties.push('invalid value for "address2", the character length must be smaller than or equal to 40.')
+      end
+
+      if !@locality.nil? && @locality.to_s.length > 30
+        invalid_properties.push('invalid value for "locality", the character length must be smaller than or equal to 30.')
+      end
+
+      if !@administrative_area.nil? && @administrative_area.to_s.length > 2
+        invalid_properties.push('invalid value for "administrative_area", the character length must be smaller than or equal to 2.')
+      end
+
+      if !@postal_code.nil? && @postal_code.to_s.length > 10
+        invalid_properties.push('invalid value for "postal_code", the character length must be smaller than or equal to 10.')
+      end
+
+      if !@country.nil? && @country.to_s.length > 2
+        invalid_properties.push('invalid value for "country", the character length must be smaller than or equal to 2.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if !@name.nil? && @name.to_s.length > 60
+      return false if !@address1.nil? && @address1.to_s.length > 40
+      return false if !@address2.nil? && @address2.to_s.length > 40
+      return false if !@locality.nil? && @locality.to_s.length > 30
+      return false if !@administrative_area.nil? && @administrative_area.to_s.length > 2
+      return false if !@postal_code.nil? && @postal_code.to_s.length > 10
+      return false if !@country.nil? && @country.to_s.length > 2
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] name Value to be assigned
+    def name=(name)
+      if !name.nil? && name.to_s.length > 60
+        fail ArgumentError, 'invalid value for "name", the character length must be smaller than or equal to 60.'
+      end
+
+      @name = name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address1 Value to be assigned
+    def address1=(address1)
+      if !address1.nil? && address1.to_s.length > 40
+        fail ArgumentError, 'invalid value for "address1", the character length must be smaller than or equal to 40.'
+      end
+
+      @address1 = address1
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address2 Value to be assigned
+    def address2=(address2)
+      if !address2.nil? && address2.to_s.length > 40
+        fail ArgumentError, 'invalid value for "address2", the character length must be smaller than or equal to 40.'
+      end
+
+      @address2 = address2
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] locality Value to be assigned
+    def locality=(locality)
+      if !locality.nil? && locality.to_s.length > 30
+        fail ArgumentError, 'invalid value for "locality", the character length must be smaller than or equal to 30.'
+      end
+
+      @locality = locality
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] administrative_area Value to be assigned
+    def administrative_area=(administrative_area)
+      if !administrative_area.nil? && administrative_area.to_s.length > 2
+        fail ArgumentError, 'invalid value for "administrative_area", the character length must be smaller than or equal to 2.'
+      end
+
+      @administrative_area = administrative_area
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] postal_code Value to be assigned
+    def postal_code=(postal_code)
+      if !postal_code.nil? && postal_code.to_s.length > 10
+        fail ArgumentError, 'invalid value for "postal_code", the character length must be smaller than or equal to 10.'
+      end
+
+      @postal_code = postal_code
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] country Value to be assigned
+    def country=(country)
+      if !country.nil? && country.to_s.length > 2
+        fail ArgumentError, 'invalid value for "country", the character length must be smaller than or equal to 2.'
+      end
+
+      @country = country
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          name == o.name &&
+          address1 == o.address1 &&
+          address2 == o.address2 &&
+          locality == o.locality &&
+          administrative_area == o.administrative_area &&
+          postal_code == o.postal_code &&
+          country == o.country
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [name, address1, address2, locality, administrative_area, postal_code, country].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end