cybersource_rest_client 0.0.68 → 0.0.69

data/lib/cybersource_rest_client/models/pts_v2_payments_captures_post201_response_processor_information.rb

@@ -1,263 +1,263 @@
-=begin
-#CyberSource Merged Spec
-
-#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
-
-OpenAPI spec version: 0.0.1
-
-Generated by: https://github.com/swagger-api/swagger-codegen.git
-Swagger Codegen version: 2.4.38
-=end
-
-require 'date'
-
-module CyberSource
-  class PtsV2PaymentsCapturesPost201ResponseProcessorInformation
-    # Processor transaction ID.  This value identifies the transaction on a host system. This value is supported only for Moneris. It contains this information:   - Terminal used to process the transaction  - Shift during which the transaction took place  - Batch number  - Transaction number within the batch  You must store this value. If you give the customer a receipt, display this value on the receipt.  Example For the value 66012345001069003:   - Terminal ID = 66012345  - Shift number = 001  - Batch number = 069  - Transaction number = 003 
-    attr_accessor :transaction_id
-
-    # Network Transaction Identifier Applicable for online capture transactions only. 
-    attr_accessor :network_transaction_id
-
-    # The processor code that describes why the transaction state is pending or reversed. 
-    attr_accessor :response_details
-
-    # For most processors, this is the error message sent directly from the bank. Returned only when the processor returns this value.  **Important** Do not use this field to evaluate the result of the authorization.  #### PIN debit Response value that is returned by the processor or bank. **Important** Do not use this field to evaluate the results of the transaction request.  Returned by PIN debit credit, PIN debit purchase, and PIN debit reversal.  #### AIBMS If this value is `08`, you can accept the transaction if the customer provides you with identification.  #### Atos This value is the response code sent from Atos and it might also include the response code from the bank. Format: `aa,bb` with the two values separated by a comma and where: - `aa` is the two-digit error message from Atos. - `bb` is the optional two-digit error message from the bank.  #### Comercio Latino This value is the status code and the error or response code received from the processor separated by a colon. Format: [status code]:E[error code] or [status code]:R[response code] Example `2:R06`  #### JCN Gateway Processor-defined detail error code. The associated response category code is in the `processorInformation.responseCategoryCode` field. String (3)  #### paypalgateway Processor generated ID for the itemized detail. 
-    attr_accessor :response_code
-
-    # Processor response to the API request. 
-    attr_accessor :provider_response
-
-    # The date and time when the transaction was last updated, in Internet date and time format. 
-    attr_accessor :update_time_utc
-
-    # Attribute mapping from ruby-style variable name to JSON key.
-    def self.attribute_map
-      {
-        :'transaction_id' => :'transactionId',
-        :'network_transaction_id' => :'networkTransactionId',
-        :'response_details' => :'responseDetails',
-        :'response_code' => :'responseCode',
-        :'provider_response' => :'providerResponse',
-        :'update_time_utc' => :'updateTimeUtc'
-      }
-    end
-
-    # Attribute mapping from JSON key to ruby-style variable name.
-    def self.json_map
-      {
-        :'transaction_id' => :'transaction_id',
-        :'network_transaction_id' => :'network_transaction_id',
-        :'response_details' => :'response_details',
-        :'response_code' => :'response_code',
-        :'provider_response' => :'provider_response',
-        :'update_time_utc' => :'update_time_utc'
-      }
-    end
-
-    # Attribute type mapping.
-    def self.swagger_types
-      {
-        :'transaction_id' => :'String',
-        :'network_transaction_id' => :'String',
-        :'response_details' => :'String',
-        :'response_code' => :'String',
-        :'provider_response' => :'String',
-        :'update_time_utc' => :'String'
-      }
-    end
-
-    # Initializes the object
-    # @param [Hash] attributes Model attributes in the form of hash
-    def initialize(attributes = {})
-      return unless attributes.is_a?(Hash)
-
-      # convert string to symbol for hash key
-      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
-
-      if attributes.has_key?(:'transactionId')
-        self.transaction_id = attributes[:'transactionId']
-      end
-
-      if attributes.has_key?(:'networkTransactionId')
-        self.network_transaction_id = attributes[:'networkTransactionId']
-      end
-
-      if attributes.has_key?(:'responseDetails')
-        self.response_details = attributes[:'responseDetails']
-      end
-
-      if attributes.has_key?(:'responseCode')
-        self.response_code = attributes[:'responseCode']
-      end
-
-      if attributes.has_key?(:'providerResponse')
-        self.provider_response = attributes[:'providerResponse']
-      end
-
-      if attributes.has_key?(:'updateTimeUtc')
-        self.update_time_utc = attributes[:'updateTimeUtc']
-      end
-    end
-
-    # Show invalid properties with the reasons. Usually used together with valid?
-    # @return Array for valid properties with the reasons
-    def list_invalid_properties
-      invalid_properties = Array.new
-      invalid_properties
-    end
-
-    # Check to see if the all the properties in the model are valid
-    # @return true if the model is valid
-    def valid?
-      true
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] transaction_id Value to be assigned
-    def transaction_id=(transaction_id)
-      @transaction_id = transaction_id
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] response_details Value to be assigned
-    def response_details=(response_details)
-      @response_details = response_details
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] response_code Value to be assigned
-    def response_code=(response_code)
-      @response_code = response_code
-    end
-
-    # Checks equality by comparing each attribute.
-    # @param [Object] Object to be compared
-    def ==(o)
-      return true if self.equal?(o)
-      self.class == o.class &&
-          transaction_id == o.transaction_id &&
-          network_transaction_id == o.network_transaction_id &&
-          response_details == o.response_details &&
-          response_code == o.response_code &&
-          provider_response == o.provider_response &&
-          update_time_utc == o.update_time_utc
-    end
-
-    # @see the `==` method
-    # @param [Object] Object to be compared
-    def eql?(o)
-      self == o
-    end
-
-    # Calculates hash code according to all attributes.
-    # @return [Fixnum] Hash code
-    def hash
-      [transaction_id, network_transaction_id, response_details, response_code, provider_response, update_time_utc].hash
-    end
-
-    # Builds the object from hash
-    # @param [Hash] attributes Model attributes in the form of hash
-    # @return [Object] Returns the model itself
-    def build_from_hash(attributes)
-      return nil unless attributes.is_a?(Hash)
-      self.class.swagger_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
-          # check to ensure the input is an array given that the the attribute
-          # is documented as an array but the input is not
-          if attributes[self.class.attribute_map[key]].is_a?(Array)
-            self.send("#{self.class.json_map[key]}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
-          end
-        elsif !attributes[self.class.attribute_map[key]].nil?
-          self.send("#{self.class.json_map[key]}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
-      end
-
-      self
-    end
-
-    # Deserializes the data based on type
-    # @param string type Data type
-    # @param string value Value to be deserialized
-    # @return [Object] Deserialized data
-    def _deserialize(type, value)
-      case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
-      when :Date
-        Date.parse(value)
-      when :String
-        value.to_s
-      when :Integer
-        value.to_i
-      when :Float
-        value.to_f
-      when :BOOLEAN
-        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
-          true
-        else
-          false
-        end
-      when :Object
-        # generic object (usually a Hash), return directly
-        value
-      when /\AArray<(?<inner_type>.+)>\z/
-        inner_type = Regexp.last_match[:inner_type]
-        value.map { |v| _deserialize(inner_type, v) }
-      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
-        k_type = Regexp.last_match[:k_type]
-        v_type = Regexp.last_match[:v_type]
-        {}.tap do |hash|
-          value.each do |k, v|
-            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
-          end
-        end
-      else # model
-        temp_model = CyberSource.const_get(type).new
-        temp_model.build_from_hash(value)
-      end
-    end
-
-    # Returns the string representation of the object
-    # @return [String] String presentation of the object
-    def to_s
-      to_hash.to_s
-    end
-
-    # to_body is an alias to to_hash (backward compatibility)
-    # @return [Hash] Returns the object in the form of hash
-    def to_body
-      to_hash
-    end
-
-    # Returns the object in the form of hash
-    # @return [Hash] Returns the object in the form of hash
-    def to_hash
-      hash = {}
-      self.class.attribute_map.each_pair do |attr, param|
-        value = self.send(attr)
-        next if value.nil?
-        hash[param] = _to_hash(value)
-      end
-      hash
-    end
-
-    # Outputs non-array value in the form of hash
-    # For object, use to_hash. Otherwise, just return the value
-    # @param [Object] value Any valid value
-    # @return [Hash] Returns the value in the form of hash
-    def _to_hash(value)
-      if value.is_a?(Array)
-        value.compact.map { |v| _to_hash(v) }
-      elsif value.is_a?(Hash)
-        {}.tap do |hash|
-          value.each { |k, v| hash[k] = _to_hash(v) }
-        end
-      elsif value.respond_to? :to_hash
-        value.to_hash
-      else
-        value
-      end
-    end
-  end
-end
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.4.38
+=end
+
+require 'date'
+
+module CyberSource
+  class PtsV2PaymentsCapturesPost201ResponseProcessorInformation
+    # Processor transaction ID.  This value identifies the transaction on a host system. This value is supported only for Moneris. It contains this information:   - Terminal used to process the transaction  - Shift during which the transaction took place  - Batch number  - Transaction number within the batch  You must store this value. If you give the customer a receipt, display this value on the receipt.  Example For the value 66012345001069003:   - Terminal ID = 66012345  - Shift number = 001  - Batch number = 069  - Transaction number = 003 
+    attr_accessor :transaction_id
+
+    # Network Transaction Identifier Applicable for online capture transactions only. 
+    attr_accessor :network_transaction_id
+
+    # The processor code that describes why the transaction state is pending or reversed. 
+    attr_accessor :response_details
+
+    # For most processors, this is the error message sent directly from the bank. Returned only when the processor returns this value.  **Important** Do not use this field to evaluate the result of the authorization.  #### PIN debit Response value that is returned by the processor or bank. **Important** Do not use this field to evaluate the results of the transaction request.  Returned by PIN debit credit, PIN debit purchase, and PIN debit reversal.  #### AIBMS If this value is `08`, you can accept the transaction if the customer provides you with identification.  #### Atos This value is the response code sent from Atos and it might also include the response code from the bank. Format: `aa,bb` with the two values separated by a comma and where: - `aa` is the two-digit error message from Atos. - `bb` is the optional two-digit error message from the bank.  #### Comercio Latino This value is the status code and the error or response code received from the processor separated by a colon. Format: [status code]:E[error code] or [status code]:R[response code] Example `2:R06`  #### JCN Gateway Processor-defined detail error code. The associated response category code is in the `processorInformation.responseCategoryCode` field. String (3)  #### paypalgateway Processor generated ID for the itemized detail. 
+    attr_accessor :response_code
+
+    # Processor response to the API request. 
+    attr_accessor :provider_response
+
+    # The date and time when the transaction was last updated, in Internet date and time format. 
+    attr_accessor :update_time_utc
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'transaction_id' => :'transactionId',
+        :'network_transaction_id' => :'networkTransactionId',
+        :'response_details' => :'responseDetails',
+        :'response_code' => :'responseCode',
+        :'provider_response' => :'providerResponse',
+        :'update_time_utc' => :'updateTimeUtc'
+      }
+    end
+
+    # Attribute mapping from JSON key to ruby-style variable name.
+    def self.json_map
+      {
+        :'transaction_id' => :'transaction_id',
+        :'network_transaction_id' => :'network_transaction_id',
+        :'response_details' => :'response_details',
+        :'response_code' => :'response_code',
+        :'provider_response' => :'provider_response',
+        :'update_time_utc' => :'update_time_utc'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'transaction_id' => :'String',
+        :'network_transaction_id' => :'String',
+        :'response_details' => :'String',
+        :'response_code' => :'String',
+        :'provider_response' => :'String',
+        :'update_time_utc' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'transactionId')
+        self.transaction_id = attributes[:'transactionId']
+      end
+
+      if attributes.has_key?(:'networkTransactionId')
+        self.network_transaction_id = attributes[:'networkTransactionId']
+      end
+
+      if attributes.has_key?(:'responseDetails')
+        self.response_details = attributes[:'responseDetails']
+      end
+
+      if attributes.has_key?(:'responseCode')
+        self.response_code = attributes[:'responseCode']
+      end
+
+      if attributes.has_key?(:'providerResponse')
+        self.provider_response = attributes[:'providerResponse']
+      end
+
+      if attributes.has_key?(:'updateTimeUtc')
+        self.update_time_utc = attributes[:'updateTimeUtc']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] transaction_id Value to be assigned
+    def transaction_id=(transaction_id)
+      @transaction_id = transaction_id
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] response_details Value to be assigned
+    def response_details=(response_details)
+      @response_details = response_details
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] response_code Value to be assigned
+    def response_code=(response_code)
+      @response_code = response_code
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          transaction_id == o.transaction_id &&
+          network_transaction_id == o.network_transaction_id &&
+          response_details == o.response_details &&
+          response_code == o.response_code &&
+          provider_response == o.provider_response &&
+          update_time_utc == o.update_time_utc
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [transaction_id, network_transaction_id, response_details, response_code, provider_response, update_time_utc].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{self.class.json_map[key]}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{self.class.json_map[key]}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end