cybersource_rest_client 0.0.61 → 0.0.63

data/lib/cybersource_rest_client/models/riskv1authentications_order_information_bill_to.rb

@@ -40,7 +40,7 @@ module CyberSource
     # Customer's phone number.  It is recommended that you include the country code when the order is from outside the U.S.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Optional field.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :phone_number
 
-    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :email
 
     # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### SEPA Required for Create Mandate and Import Mandate  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville Required if `pointOfSaleInformation.entryMode=keyed` and the address is in the U.S. or Canada. Optional if `pointOfSaleInformation.entryMode=keyed` and the address is **not** in the U.S. or Canada. Not used if swiped.  #### RBS WorldPay Atlanta: For best card-present keyed rates, send the postal code if `pointOfSaleInformation.entryMode=keyed`.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional field. 
@@ -201,9 +201,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] address1 Value to be assigned
     def address1=(address1)
-      if address1.nil?
-        fail ArgumentError, 'address1 cannot be nil'
-      end
+      #if address1.nil?
+        #fail ArgumentError, 'address1 cannot be nil'
+      #end
 
       @address1 = address1
     end
@@ -223,9 +223,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] administrative_area Value to be assigned
     def administrative_area=(administrative_area)
-      if administrative_area.nil?
-        fail ArgumentError, 'administrative_area cannot be nil'
-      end
+      #if administrative_area.nil?
+        #fail ArgumentError, 'administrative_area cannot be nil'
+      #end
 
       @administrative_area = administrative_area
     end
@@ -233,9 +233,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] country Value to be assigned
     def country=(country)
-      if country.nil?
-        fail ArgumentError, 'country cannot be nil'
-      end
+      #if country.nil?
+        #fail ArgumentError, 'country cannot be nil'
+      #end
 
       @country = country
     end
@@ -249,9 +249,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] first_name Value to be assigned
     def first_name=(first_name)
-      if first_name.nil?
-        fail ArgumentError, 'first_name cannot be nil'
-      end
+      #if first_name.nil?
+        #fail ArgumentError, 'first_name cannot be nil'
+      #end
 
       @first_name = first_name
     end
@@ -259,9 +259,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] last_name Value to be assigned
     def last_name=(last_name)
-      if last_name.nil?
-        fail ArgumentError, 'last_name cannot be nil'
-      end
+      #if last_name.nil?
+        #fail ArgumentError, 'last_name cannot be nil'
+      #end
 
       @last_name = last_name
     end
@@ -275,9 +275,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] email Value to be assigned
     def email=(email)
-      if email.nil?
-        fail ArgumentError, 'email cannot be nil'
-      end
+      #if email.nil?
+        #fail ArgumentError, 'email cannot be nil'
+      #end
 
       @email = email
     end
@@ -285,9 +285,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] postal_code Value to be assigned
     def postal_code=(postal_code)
-      if postal_code.nil?
-        fail ArgumentError, 'postal_code cannot be nil'
-      end
+      #if postal_code.nil?
+        #fail ArgumentError, 'postal_code cannot be nil'
+      #end
 
       @postal_code = postal_code
     end

data/lib/cybersource_rest_client/models/riskv1authentications_order_information_line_items.rb

@@ -266,9 +266,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] unit_price Value to be assigned
     def unit_price=(unit_price)
-      if unit_price.nil?
-        fail ArgumentError, 'unit_price cannot be nil'
-      end
+      #if unit_price.nil?
+        #fail ArgumentError, 'unit_price cannot be nil'
+      #end
 
       @unit_price = unit_price
     end

data/lib/cybersource_rest_client/models/riskv1authentications_payment_information_card.rb

@@ -132,9 +132,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] expiration_month Value to be assigned
     def expiration_month=(expiration_month)
-      if expiration_month.nil?
-        fail ArgumentError, 'expiration_month cannot be nil'
-      end
+      #if expiration_month.nil?
+        #fail ArgumentError, 'expiration_month cannot be nil'
+      #end
 
       @expiration_month = expiration_month
     end
@@ -142,9 +142,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] expiration_year Value to be assigned
     def expiration_year=(expiration_year)
-      if expiration_year.nil?
-        fail ArgumentError, 'expiration_year cannot be nil'
-      end
+      #if expiration_year.nil?
+        #fail ArgumentError, 'expiration_year cannot be nil'
+      #end
 
       @expiration_year = expiration_year
     end
@@ -152,9 +152,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] number Value to be assigned
     def number=(number)
-      if number.nil?
-        fail ArgumentError, 'number cannot be nil'
-      end
+      #if number.nil?
+        #fail ArgumentError, 'number cannot be nil'
+      #end
 
       @number = number
     end

data/lib/cybersource_rest_client/models/riskv1authentications_payment_information_tokenized_card.rb

@@ -161,9 +161,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] transaction_type Value to be assigned
     def transaction_type=(transaction_type)
-      if transaction_type.nil?
-        fail ArgumentError, 'transaction_type cannot be nil'
-      end
+      #if transaction_type.nil?
+        #fail ArgumentError, 'transaction_type cannot be nil'
+      #end
 
       @transaction_type = transaction_type
     end
@@ -171,9 +171,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] expiration_month Value to be assigned
     def expiration_month=(expiration_month)
-      if expiration_month.nil?
-        fail ArgumentError, 'expiration_month cannot be nil'
-      end
+      #if expiration_month.nil?
+        #fail ArgumentError, 'expiration_month cannot be nil'
+      #end
 
       @expiration_month = expiration_month
     end
@@ -181,9 +181,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] expiration_year Value to be assigned
     def expiration_year=(expiration_year)
-      if expiration_year.nil?
-        fail ArgumentError, 'expiration_year cannot be nil'
-      end
+      #if expiration_year.nil?
+        #fail ArgumentError, 'expiration_year cannot be nil'
+      #end
 
       @expiration_year = expiration_year
     end
@@ -191,9 +191,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] cryptogram Value to be assigned
     def cryptogram=(cryptogram)
-      if cryptogram.nil?
-        fail ArgumentError, 'cryptogram cannot be nil'
-      end
+      #if cryptogram.nil?
+        #fail ArgumentError, 'cryptogram cannot be nil'
+      #end
 
       @cryptogram = cryptogram
     end
@@ -201,9 +201,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] security_code Value to be assigned
     def security_code=(security_code)
-      if security_code.nil?
-        fail ArgumentError, 'security_code cannot be nil'
-      end
+      #if security_code.nil?
+        #fail ArgumentError, 'security_code cannot be nil'
+      #end
 
       @security_code = security_code
     end
@@ -211,9 +211,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] number Value to be assigned
     def number=(number)
-      if number.nil?
-        fail ArgumentError, 'number cannot be nil'
-      end
+      #if number.nil?
+        #fail ArgumentError, 'number cannot be nil'
+      #end
 
       @number = number
     end

data/lib/cybersource_rest_client/models/riskv1authenticationsetups_payment_information_card.rb

@@ -111,9 +111,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] expiration_month Value to be assigned
     def expiration_month=(expiration_month)
-      if expiration_month.nil?
-        fail ArgumentError, 'expiration_month cannot be nil'
-      end
+      #if expiration_month.nil?
+        #fail ArgumentError, 'expiration_month cannot be nil'
+      #end
 
       @expiration_month = expiration_month
     end
@@ -121,9 +121,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] expiration_year Value to be assigned
     def expiration_year=(expiration_year)
-      if expiration_year.nil?
-        fail ArgumentError, 'expiration_year cannot be nil'
-      end
+      #if expiration_year.nil?
+        #fail ArgumentError, 'expiration_year cannot be nil'
+      #end
 
       @expiration_year = expiration_year
     end
@@ -131,9 +131,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] number Value to be assigned
     def number=(number)
-      if number.nil?
-        fail ArgumentError, 'number cannot be nil'
-      end
+      #if number.nil?
+        #fail ArgumentError, 'number cannot be nil'
+      #end
 
       @number = number
     end

data/lib/cybersource_rest_client/models/riskv1authenticationsetups_payment_information_fluid_data.rb

@@ -101,9 +101,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] value Value to be assigned
     def value=(value)
-      if value.nil?
-        fail ArgumentError, 'value cannot be nil'
-      end
+      #if value.nil?
+        #fail ArgumentError, 'value cannot be nil'
+      #end
 
       @value = value
     end

data/lib/cybersource_rest_client/models/riskv1authenticationsetups_payment_information_tokenized_card.rb

@@ -131,9 +131,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] transaction_type Value to be assigned
     def transaction_type=(transaction_type)
-      if transaction_type.nil?
-        fail ArgumentError, 'transaction_type cannot be nil'
-      end
+      #if transaction_type.nil?
+        #fail ArgumentError, 'transaction_type cannot be nil'
+      #end
 
       @transaction_type = transaction_type
     end
@@ -141,9 +141,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] expiration_month Value to be assigned
     def expiration_month=(expiration_month)
-      if expiration_month.nil?
-        fail ArgumentError, 'expiration_month cannot be nil'
-      end
+      #if expiration_month.nil?
+        #fail ArgumentError, 'expiration_month cannot be nil'
+      #end
 
       @expiration_month = expiration_month
     end
@@ -151,9 +151,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] expiration_year Value to be assigned
     def expiration_year=(expiration_year)
-      if expiration_year.nil?
-        fail ArgumentError, 'expiration_year cannot be nil'
-      end
+      #if expiration_year.nil?
+        #fail ArgumentError, 'expiration_year cannot be nil'
+      #end
 
       @expiration_year = expiration_year
     end
@@ -161,9 +161,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] number Value to be assigned
     def number=(number)
-      if number.nil?
-        fail ArgumentError, 'number cannot be nil'
-      end
+      #if number.nil?
+        #fail ArgumentError, 'number cannot be nil'
+      #end
 
       @number = number
     end

data/lib/cybersource_rest_client/models/riskv1decisions_buyer_information.rb

@@ -14,16 +14,16 @@ require 'date'
 module CyberSource
   # Contains information about the buyer.
   class Riskv1decisionsBuyerInformation
-    # Your identifier for the customer.  When a subscription or customer profile is being created, the maximum length for this field for most processors is 30. Otherwise, the maximum length is 100.  #### Comercio Latino For recurring payments in Mexico, the value is the customer's contract number. Note Before you request the authorization, you must inform the issuer of the customer contract numbers that will be used for recurring transactions.  #### Worldpay VAP For a follow-on credit with Worldpay VAP, CyberSource checks the following locations, in the order given, for a customer account ID value and uses the first value it finds: 1. `customer_account_id` value in the follow-on credit request 2. Customer account ID value that was used for the capture that is being credited 3. Customer account ID value that was used for the original authorization If a customer account ID value cannot be found in any of these locations, then no value is used.  For processor-specific information, see the `customer_account_id` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Your identifier for the customer.  When a subscription or customer profile is being created, the maximum length for this field for most processors is 30. Otherwise, the maximum length is 100.  #### Comercio Latino For recurring payments in Mexico, the value is the customer's contract number. Note Before you request the authorization, you must inform the issuer of the customer contract numbers that will be used for recurring transactions.  #### Worldpay VAP For a follow-on credit with Worldpay VAP, CyberSource checks the following locations, in the order given, for a customer account ID value and uses the first value it finds: 1. `customer_account_id` value in the follow-on credit request 2. Customer account ID value that was used for the capture that is being credited 3. Customer account ID value that was used for the original authorization If a customer account ID value cannot be found in any of these locations, then no value is used. 
     attr_accessor :merchant_customer_id
 
     # Specifies the customer account user name.
     attr_accessor :username
 
-    # The merchant's password that CyberSource hashes and stores as a hashed password.  For details about this field, see the `customer_password` field description in _Decision Manager Using the SCMP API Developer Guide_ on the [CyberSource Business Center.](https://ebc2.cybersource.com/ebc2/) Click **Decision Manager** > **Documentation** > **Guides** > _Decision Manager Using the SCMP API Developer Guide_ (PDF link). 
+    # The merchant's password that CyberSource hashes and stores as a hashed password. 
     attr_accessor :hashed_password
 
-    # Recipient's date of birth. **Format**: `YYYYMMDD`.  This field is a `pass-through`, which means that CyberSource ensures that the value is eight numeric characters but otherwise does not verify the value or modify it in any way before sending it to the processor. If the field is not required for the transaction, CyberSource does not forward it to the processor.  For more details, see `recipient_date_of_birth` field description in the [Credit Card Services Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/) 
+    # Recipient's date of birth. **Format**: `YYYYMMDD`.  This field is a `pass-through`, which means that CyberSource ensures that the value is eight numeric characters but otherwise does not verify the value or modify it in any way before sending it to the processor. If the field is not required for the transaction, CyberSource does not forward it to the processor. 
     attr_accessor :date_of_birth
 
     attr_accessor :personal_identification

data/lib/cybersource_rest_client/models/riskv1decisions_client_reference_information.rb

@@ -100,9 +100,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] code Value to be assigned
     def code=(code)
-      if code.nil?
-        fail ArgumentError, 'code cannot be nil'
-      end
+      #if code.nil?
+        #fail ArgumentError, 'code cannot be nil'
+      #end
 
       @code = code
     end

data/lib/cybersource_rest_client/models/riskv1decisions_consumer_authentication_information.rb

@@ -42,7 +42,7 @@ module CyberSource
     # An indicator as to why the transaction was canceled. Possible Values:  - `01`: Cardholder selected Cancel. - `02`: Reserved for future EMVCo use (values invalid until defined by EMVCo). - `03`: Transaction Timed Out—Decoupled Authentication - `04`: Transaction timed out at ACS—other timeouts - `05`: Transaction Timed out at ACS - First CReq not received by ACS - `06`: Transaction Error - `07`: Unknown - `08`: Transaction Timed Out at SDK 
     attr_accessor :challenge_cancel_code
 
-    # Possible values: - `01`: No preference - `02`: No challenge request - `03`: Challenge requested (3D Secure requestor preference) - `04`: Challenge requested (mandate) - `05`: No challenge requested (transactional risk analysis is already performed) - `06`: No challenge requested (Data share only) - `07`: No challenge requested (strong consumer authentication is already performed) - `08`: No challenge requested (utilize whitelist exemption if no challenge required) - `09`: Challenge requested (whitelist prompt requested if challenge required) **Note** This field will default to `01` on merchant configuration and can be overridden by the merchant. EMV 3D Secure version 2.1.0 supports values `01-04`. Version 2.2.0 supports values `01-09`.  For details, see `pa_challenge_code` field description in [CyberSource Payer Authentication Using the SCMP API.] (https://apps.cybersource.com/library/documentation/dev_guides/Payer_Authentication_SCMP_API/html) 
+    # Possible values: - `01`: No preference - `02`: No challenge request - `03`: Challenge requested (3D Secure requestor preference) - `04`: Challenge requested (mandate) - `05`: No challenge requested (transactional risk analysis is already performed) - `06`: No challenge requested (Data share only) - `07`: No challenge requested (strong consumer authentication is already performed) - `08`: No challenge requested (utilize whitelist exemption if no challenge required) - `09`: Challenge requested (whitelist prompt requested if challenge required) **Note** This field will default to `01` on merchant configuration and can be overridden by the merchant. EMV 3D Secure version 2.1.0 supports values `01-04`. Version 2.2.0 supports values `01-09`. 
     attr_accessor :challenge_code
 
     # The `consumerAuthenticationInformation.challengeCode` indicates the authentication type/level, or challenge, that was presented to the cardholder at checkout by the merchant when calling the Carte Bancaire 3DS servers via CYBS RISK services. It conveys to the issuer the alternative authentication methods that the consumer used. 

data/lib/cybersource_rest_client/models/riskv1decisions_order_information_amount_details.rb

@@ -14,7 +14,7 @@ require 'date'
 module CyberSource
   # Contains `currency` and `totalAmount` for this order.
   class Riskv1decisionsOrderInformationAmountDetails
-    # Currency used for the order. Use the three-character [ISO Standard Currency Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/currencies.pdf)  #### Used by **Authorization** Required field.  **Authorization Reversal** For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your payment authorization request.  #### PIN Debit Currency for the amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf). Returned by PIN debit purchase.  For PIN debit reversal requests, you must use the same currency that was used for the PIN debit purchase or PIN debit credit that you are reversing. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf).  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit.  #### DCC for First Data Your local currency. For details, see the `currency` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### Tax Calculation Required for international tax and value added tax only. Optional for U.S. and Canadian taxes. Your local currency. 
+    # Currency used for the order. Use the three-character [ISO Standard Currency Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/currencies.pdf)  #### Used by **Authorization** Required field.  **Authorization Reversal** For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your payment authorization request.  #### PIN Debit Currency for the amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf). Returned by PIN debit purchase.  For PIN debit reversal requests, you must use the same currency that was used for the PIN debit purchase or PIN debit credit that you are reversing. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf).  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit.  #### DCC for First Data Your local currency.  #### Tax Calculation Required for international tax and value added tax only. Optional for U.S. and Canadian taxes. Your local currency. 
     attr_accessor :currency
 
     # Grand total for the order. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  **Note** For CTV, FDCCompass, Paymentech processors, the maximum length for this field is 12.  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. For details, see: - \"Authorization Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Capture Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Credit Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/).  If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. For details, see \"Zero Amount Authorizations,\" \"Credit Information for Specific Processors\" in [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### Card Present Required to include either this field or `orderInformation.lineItems[].unitPrice` for the order.  #### Invoicing Required for creating a new invoice.  #### PIN Debit Amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount.  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit; however, for all other processors, these fields are required.  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either this field or the 1st line item in the order and the specific line-order amount in your request. For details, see `grand_total_amount` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in \"Authorization Information for Specific Processors\" of the [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC for First Data Not used. 
@@ -82,9 +82,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] currency Value to be assigned
     def currency=(currency)
-      if currency.nil?
-        fail ArgumentError, 'currency cannot be nil'
-      end
+      #if currency.nil?
+        #fail ArgumentError, 'currency cannot be nil'
+      #end
 
       @currency = currency
     end

data/lib/cybersource_rest_client/models/riskv1decisions_order_information_bill_to.rb

@@ -37,7 +37,7 @@ module CyberSource
     # Customer's phone number.  It is recommended that you include the country code when the order is from outside the U.S.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Optional field.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :phone_number
 
-    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :email
 
     # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### SEPA Required for Create Mandate and Import Mandate  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville Required if `pointOfSaleInformation.entryMode=keyed` and the address is in the U.S. or Canada. Optional if `pointOfSaleInformation.entryMode=keyed` and the address is **not** in the U.S. or Canada. Not used if swiped.  #### RBS WorldPay Atlanta: For best card-present keyed rates, send the postal code if `pointOfSaleInformation.entryMode=keyed`.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional field. 

data/lib/cybersource_rest_client/models/riskv1decisions_processor_information_card_verification.rb

@@ -13,7 +13,7 @@ require 'date'
 
 module CyberSource
   class Riskv1decisionsProcessorInformationCardVerification
-    # CVN result code.  For details, see the `auth_cv_result` reply field description in the [Credit Card Services Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/) 
+    # CVN result code. 
     attr_accessor :result_code
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/riskv1exportcomplianceinquiries_order_information_bill_to.rb

@@ -45,7 +45,7 @@ module CyberSource
     # Customer's last name. This name must be the same as the name on the card.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### SEPA Required for Create Mandate and Import Mandate #### BACS Required for Import Mandate #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### OmniPay Direct Optional field.  #### RBS WorldPay Atlanta Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :last_name
 
-    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :email
 
     # Attribute mapping from ruby-style variable name to JSON key.
@@ -200,9 +200,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] address1 Value to be assigned
     def address1=(address1)
-      if address1.nil?
-        fail ArgumentError, 'address1 cannot be nil'
-      end
+      #if address1.nil?
+        #fail ArgumentError, 'address1 cannot be nil'
+      #end
 
       @address1 = address1
     end
@@ -234,9 +234,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] country Value to be assigned
     def country=(country)
-      if country.nil?
-        fail ArgumentError, 'country cannot be nil'
-      end
+      #if country.nil?
+        #fail ArgumentError, 'country cannot be nil'
+      #end
 
       @country = country
     end
@@ -244,9 +244,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] locality Value to be assigned
     def locality=(locality)
-      if locality.nil?
-        fail ArgumentError, 'locality cannot be nil'
-      end
+      #if locality.nil?
+        #fail ArgumentError, 'locality cannot be nil'
+      #end
 
       @locality = locality
     end
@@ -254,9 +254,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] postal_code Value to be assigned
     def postal_code=(postal_code)
-      if postal_code.nil?
-        fail ArgumentError, 'postal_code cannot be nil'
-      end
+      #if postal_code.nil?
+        #fail ArgumentError, 'postal_code cannot be nil'
+      #end
 
       @postal_code = postal_code
     end
@@ -276,9 +276,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] email Value to be assigned
     def email=(email)
-      if email.nil?
-        fail ArgumentError, 'email cannot be nil'
-      end
+      #if email.nil?
+        #fail ArgumentError, 'email cannot be nil'
+      #end
 
       @email = email
     end

data/lib/cybersource_rest_client/models/riskv1exportcomplianceinquiries_order_information_line_items.rb

@@ -143,9 +143,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] unit_price Value to be assigned
     def unit_price=(unit_price)
-      if unit_price.nil?
-        fail ArgumentError, 'unit_price cannot be nil'
-      end
+      #if unit_price.nil?
+        #fail ArgumentError, 'unit_price cannot be nil'
+      #end
 
       @unit_price = unit_price
     end

data/lib/cybersource_rest_client/models/riskv1liststypeentries_client_reference_information.rb

@@ -90,9 +90,9 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] code Value to be assigned
     def code=(code)
-      if code.nil?
-        fail ArgumentError, 'code cannot be nil'
-      end
+      #if code.nil?
+        #fail ArgumentError, 'code cannot be nil'
+      #end
 
       @code = code
     end

data/lib/cybersource_rest_client/models/riskv1liststypeentries_order_information_bill_to.rb

@@ -40,7 +40,7 @@ module CyberSource
     # Customer's phone number.  It is recommended that you include the country code when the order is from outside the U.S.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Optional field.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :phone_number
 
-    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :email
 
     # Email domain of the customer. The domain of the email address comprises all characters that follow the @ symbol, such as mail.example.com. For the Risk Update service, if the email address and the domain are sent in the request, the domain supersedes the email address. 

data/lib/cybersource_rest_client/models/tms_embedded_instrument_identifier.rb

@@ -24,7 +24,7 @@ module CyberSource
     # Issuers state for the card number. Possible Values: - ACTIVE - CLOSED : The account has been closed. 
     attr_accessor :state
 
-    # The type of Instrument Identifier. Possible Values: - enrollable card 
+    # The type of Instrument Identifier. Possible Values: - enrollable card - enrollable token 
     attr_accessor :type
 
     attr_accessor :token_provisioning_information
@@ -89,7 +89,7 @@ module CyberSource
         :'object' => :'String',
         :'state' => :'String',
         :'type' => :'String',
-        :'token_provisioning_information' => :'TmsEmbeddedInstrumentIdentifierTokenProvisioningInformation',
+        :'token_provisioning_information' => :'Ptsv2paymentsTokenInformationTokenProvisioningInformation',
         :'card' => :'TmsEmbeddedInstrumentIdentifierCard',
         :'bank_account' => :'TmsEmbeddedInstrumentIdentifierBankAccount',
         :'tokenized_card' => :'TmsEmbeddedInstrumentIdentifierTokenizedCard',