cybersource_rest_client 0.0.39 → 0.0.40

data/lib/cybersource_rest_client/models/riskv1authenticationresults_payment_information_tokenized_card.rb

@@ -1,248 +1,248 @@
-=begin
-#CyberSource Merged Spec
-
-#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
-
-OpenAPI spec version: 0.0.1
-
-Generated by: https://github.com/swagger-api/swagger-codegen.git
-Swagger Codegen version: 2.2.3
-
-=end
-
-require 'date'
-
-module CyberSource
-  class Riskv1authenticationresultsPaymentInformationTokenizedCard
-    # Type of transaction that provided the token data. This value does not specify the token service provider; it specifies the entity that provided you with information about the token.  Possible value: - `2`: Near-field communication (NFC) transaction. The customer’s mobile device provided the token data for a contactless EMV transaction. For recurring transactions, use this value if the original transaction was a contactless EMV transaction.  **NOTE** No CyberSource through VisaNet acquirers support EMV at this time.  Required field for PIN debit credit or PIN debit purchase transactions that use payment network tokens; otherwise, not used. 
-    attr_accessor :transaction_type
-
-    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1,4] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. [^4]: For this card type, you must include the `paymentInformation.card.type` in your request for any payer authentication services.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### Google Pay transactions For PAN-based Google Pay transactions, this field is returned in the API response.  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
-    attr_accessor :type
-
-    # One of two possible meanings: - The two-digit month in which a token expires. - The two-digit month in which a card expires. Format: `MM` Possible values: `01` through `12`  **NOTE** The meaning of this field is dependent on the payment processor that is returning the value in an authorization reply. Please see the processor-specific details below.  #### Barclays and Streamline For Maestro (UK Domestic) and Maestro (International) cards on Barclays and Streamline, this must be a valid value (`01` through `12`) but is not required to be a valid expiration date. In other words, an expiration date that is in the past does not cause CyberSource to reject your request. However, an invalid expiration date might cause the issuer to reject your request.  #### Encoded Account Numbers For encoded account numbers (`card_type=039`), if there is no expiration date on the card, use `12`.\\ **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Samsung Pay and Apple Pay Month in which the token expires. CyberSource includes this field in the reply message when it decrypts the payment blob for the tokenized transaction.  For processor-specific information, see the `customer_cc_expmo` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :expiration_month
-
-    # One of two possible meanings: - The four-digit year in which a token expires. - The four-digit year in which a card expires. Format: `YYYY` Possible values: `1900` through `3000` Data type: Non-negative integer  **NOTE** The meaning of this field is dependent on the payment processor that is returning the value in an authorization reply. Please see the processor-specific details below.  #### Barclays and Streamline For Maestro (UK Domestic) and Maestro (International) cards on Barclays and Streamline, this must be a valid value (1900 through 3000) but is not required to be a valid expiration date. In other words, an expiration date that is in the past does not cause CyberSource to reject your request. However, an invalid expiration date might cause the issuer to reject your request.  #### Encoded Account Numbers For encoded account numbers (`card_ type=039`), if there is no expiration date on the card, use `2021`.  #### FDC Nashville Global and FDMS South You can send in 2 digits or 4 digits. When you send in 2 digits, they must be the last 2 digits of the year.  #### Samsung Pay and Apple Pay Year in which the token expires. CyberSource includes this field in the reply message when it decrypts the payment blob for the tokenized transaction.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_cc_expyr` or `token_expiration_year` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :expiration_year
-
-    # Customer’s payment network token value. 
-    attr_accessor :number
-
-    # Attribute mapping from ruby-style variable name to JSON key.
-    def self.attribute_map
-      {
-        :'transaction_type' => :'transactionType',
-        :'type' => :'type',
-        :'expiration_month' => :'expirationMonth',
-        :'expiration_year' => :'expirationYear',
-        :'number' => :'number'
-      }
-    end
-
-    # Attribute type mapping.
-    def self.swagger_types
-      {
-        :'transaction_type' => :'String',
-        :'type' => :'String',
-        :'expiration_month' => :'String',
-        :'expiration_year' => :'String',
-        :'number' => :'String'
-      }
-    end
-
-    # Initializes the object
-    # @param [Hash] attributes Model attributes in the form of hash
-    def initialize(attributes = {})
-      return unless attributes.is_a?(Hash)
-
-      # convert string to symbol for hash key
-      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
-
-      if attributes.has_key?(:'transactionType')
-        self.transaction_type = attributes[:'transactionType']
-      end
-
-      if attributes.has_key?(:'type')
-        self.type = attributes[:'type']
-      end
-
-      if attributes.has_key?(:'expirationMonth')
-        self.expiration_month = attributes[:'expirationMonth']
-      end
-
-      if attributes.has_key?(:'expirationYear')
-        self.expiration_year = attributes[:'expirationYear']
-      end
-
-      if attributes.has_key?(:'number')
-        self.number = attributes[:'number']
-      end
-    end
-
-    # Show invalid properties with the reasons. Usually used together with valid?
-    # @return Array for valid properties with the reasons
-    def list_invalid_properties
-      invalid_properties = Array.new
-      invalid_properties
-    end
-
-    # Check to see if the all the properties in the model are valid
-    # @return true if the model is valid
-    def valid?
-      true
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] transaction_type Value to be assigned
-    def transaction_type=(transaction_type)
-      @transaction_type = transaction_type
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] expiration_month Value to be assigned
-    def expiration_month=(expiration_month)
-      @expiration_month = expiration_month
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] expiration_year Value to be assigned
-    def expiration_year=(expiration_year)
-      @expiration_year = expiration_year
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] number Value to be assigned
-    def number=(number)
-      @number = number
-    end
-
-    # Checks equality by comparing each attribute.
-    # @param [Object] Object to be compared
-    def ==(o)
-      return true if self.equal?(o)
-      self.class == o.class &&
-          transaction_type == o.transaction_type &&
-          type == o.type &&
-          expiration_month == o.expiration_month &&
-          expiration_year == o.expiration_year &&
-          number == o.number
-    end
-
-    # @see the `==` method
-    # @param [Object] Object to be compared
-    def eql?(o)
-      self == o
-    end
-
-    # Calculates hash code according to all attributes.
-    # @return [Fixnum] Hash code
-    def hash
-      [transaction_type, type, expiration_month, expiration_year, number].hash
-    end
-
-    # Builds the object from hash
-    # @param [Hash] attributes Model attributes in the form of hash
-    # @return [Object] Returns the model itself
-    def build_from_hash(attributes)
-      return nil unless attributes.is_a?(Hash)
-      self.class.swagger_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
-          # check to ensure the input is an array given that the the attribute
-          # is documented as an array but the input is not
-          if attributes[self.class.attribute_map[key]].is_a?(Array)
-            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
-          end
-        elsif !attributes[self.class.attribute_map[key]].nil?
-          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
-      end
-
-      self
-    end
-
-    # Deserializes the data based on type
-    # @param string type Data type
-    # @param string value Value to be deserialized
-    # @return [Object] Deserialized data
-    def _deserialize(type, value)
-      case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
-      when :Date
-        Date.parse(value)
-      when :String
-        value.to_s
-      when :Integer
-        value.to_i
-      when :Float
-        value.to_f
-      when :BOOLEAN
-        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
-          true
-        else
-          false
-        end
-      when :Object
-        # generic object (usually a Hash), return directly
-        value
-      when /\AArray<(?<inner_type>.+)>\z/
-        inner_type = Regexp.last_match[:inner_type]
-        value.map { |v| _deserialize(inner_type, v) }
-      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
-        k_type = Regexp.last_match[:k_type]
-        v_type = Regexp.last_match[:v_type]
-        {}.tap do |hash|
-          value.each do |k, v|
-            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
-          end
-        end
-      else # model
-        temp_model = CyberSource.const_get(type).new
-        temp_model.build_from_hash(value)
-      end
-    end
-
-    # Returns the string representation of the object
-    # @return [String] String presentation of the object
-    def to_s
-      to_hash.to_s
-    end
-
-    # to_body is an alias to to_hash (backward compatibility)
-    # @return [Hash] Returns the object in the form of hash
-    def to_body
-      to_hash
-    end
-
-    # Returns the object in the form of hash
-    # @return [Hash] Returns the object in the form of hash
-    def to_hash
-      hash = {}
-      self.class.attribute_map.each_pair do |attr, param|
-        value = self.send(attr)
-        next if value.nil?
-        hash[param] = _to_hash(value)
-      end
-      hash
-    end
-
-    # Outputs non-array value in the form of hash
-    # For object, use to_hash. Otherwise, just return the value
-    # @param [Object] value Any valid value
-    # @return [Hash] Returns the value in the form of hash
-    def _to_hash(value)
-      if value.is_a?(Array)
-        value.compact.map { |v| _to_hash(v) }
-      elsif value.is_a?(Hash)
-        {}.tap do |hash|
-          value.each { |k, v| hash[k] = _to_hash(v) }
-        end
-      elsif value.respond_to? :to_hash
-        value.to_hash
-      else
-        value
-      end
-    end
-  end
-end
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class Riskv1authenticationresultsPaymentInformationTokenizedCard
+    # Type of transaction that provided the token data. This value does not specify the token service provider; it specifies the entity that provided you with information about the token.  Possible value: - `2`: Near-field communication (NFC) transaction. The customer’s mobile device provided the token data for a contactless EMV transaction. For recurring transactions, use this value if the original transaction was a contactless EMV transaction.  **NOTE** No CyberSource through VisaNet acquirers support EMV at this time.  Required field for PIN debit credit or PIN debit purchase transactions that use payment network tokens; otherwise, not used. 
+    attr_accessor :transaction_type
+
+    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1,4] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. [^4]: For this card type, you must include the `paymentInformation.card.type` in your request for any payer authentication services.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### Google Pay transactions For PAN-based Google Pay transactions, this field is returned in the API response.  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
+    attr_accessor :type
+
+    # One of two possible meanings: - The two-digit month in which a token expires. - The two-digit month in which a card expires. Format: `MM` Possible values: `01` through `12`  **NOTE** The meaning of this field is dependent on the payment processor that is returning the value in an authorization reply. Please see the processor-specific details below.  #### Barclays and Streamline For Maestro (UK Domestic) and Maestro (International) cards on Barclays and Streamline, this must be a valid value (`01` through `12`) but is not required to be a valid expiration date. In other words, an expiration date that is in the past does not cause CyberSource to reject your request. However, an invalid expiration date might cause the issuer to reject your request.  #### Encoded Account Numbers For encoded account numbers (`card_type=039`), if there is no expiration date on the card, use `12`.\\ **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Samsung Pay and Apple Pay Month in which the token expires. CyberSource includes this field in the reply message when it decrypts the payment blob for the tokenized transaction.  For processor-specific information, see the `customer_cc_expmo` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :expiration_month
+
+    # One of two possible meanings: - The four-digit year in which a token expires. - The four-digit year in which a card expires. Format: `YYYY` Possible values: `1900` through `3000` Data type: Non-negative integer  **NOTE** The meaning of this field is dependent on the payment processor that is returning the value in an authorization reply. Please see the processor-specific details below.  #### Barclays and Streamline For Maestro (UK Domestic) and Maestro (International) cards on Barclays and Streamline, this must be a valid value (1900 through 3000) but is not required to be a valid expiration date. In other words, an expiration date that is in the past does not cause CyberSource to reject your request. However, an invalid expiration date might cause the issuer to reject your request.  #### Encoded Account Numbers For encoded account numbers (`card_ type=039`), if there is no expiration date on the card, use `2021`.  #### FDC Nashville Global and FDMS South You can send in 2 digits or 4 digits. When you send in 2 digits, they must be the last 2 digits of the year.  #### Samsung Pay and Apple Pay Year in which the token expires. CyberSource includes this field in the reply message when it decrypts the payment blob for the tokenized transaction.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_cc_expyr` or `token_expiration_year` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :expiration_year
+
+    # Customer’s payment network token value. 
+    attr_accessor :number
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'transaction_type' => :'transactionType',
+        :'type' => :'type',
+        :'expiration_month' => :'expirationMonth',
+        :'expiration_year' => :'expirationYear',
+        :'number' => :'number'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'transaction_type' => :'String',
+        :'type' => :'String',
+        :'expiration_month' => :'String',
+        :'expiration_year' => :'String',
+        :'number' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'transactionType')
+        self.transaction_type = attributes[:'transactionType']
+      end
+
+      if attributes.has_key?(:'type')
+        self.type = attributes[:'type']
+      end
+
+      if attributes.has_key?(:'expirationMonth')
+        self.expiration_month = attributes[:'expirationMonth']
+      end
+
+      if attributes.has_key?(:'expirationYear')
+        self.expiration_year = attributes[:'expirationYear']
+      end
+
+      if attributes.has_key?(:'number')
+        self.number = attributes[:'number']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] transaction_type Value to be assigned
+    def transaction_type=(transaction_type)
+      @transaction_type = transaction_type
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] expiration_month Value to be assigned
+    def expiration_month=(expiration_month)
+      @expiration_month = expiration_month
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] expiration_year Value to be assigned
+    def expiration_year=(expiration_year)
+      @expiration_year = expiration_year
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] number Value to be assigned
+    def number=(number)
+      @number = number
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          transaction_type == o.transaction_type &&
+          type == o.type &&
+          expiration_month == o.expiration_month &&
+          expiration_year == o.expiration_year &&
+          number == o.number
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [transaction_type, type, expiration_month, expiration_year, number].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end