cybersource_rest_client 0.0.24 → 0.0.29

data/lib/cybersource_rest_client/models/ptsv2payments_buyer_information_personal_identification.rb

@@ -1,219 +1,210 @@
-=begin
-#CyberSource Merged Spec
-
-#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
-
-OpenAPI spec version: 0.0.1
-
-Generated by: https://github.com/swagger-api/swagger-codegen.git
-Swagger Codegen version: 2.2.3
-
-=end
-
-require 'date'
-
-module CyberSource
-  class Ptsv2paymentsBuyerInformationPersonalIdentification
-    # The type of the identification.  Possible values:   - `NATIONAL`   - `CPF`   - `CPNJ`   - `CURP`   - `SSN`   - `DRIVER_LICENSE`  This field is supported only on the following processors.  #### ComercioLatino Set this field to the Cadastro de Pessoas Fisicas (CPF).  #### CyberSource Latin American Processing Supported for Redecard in Brazil. Set this field to the Cadastro de Pessoas Fisicas (CPF), which is required for AVS for Redecard in Brazil. **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  For processor-specific information, see the `personal_id` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :type
-
-    # The value of the identification type. This field is supported only on the following processors.  #### ComercioLatino Set this field to the Cadastro de Pessoas Fisicas (CPF).  #### CyberSource Latin American Processing Supported for Redecard in Brazil. Set this field to the Cadastro de Pessoas Fisicas (CPF), which is required for AVS for Redecard in Brazil. **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  For processor-specific information, see the `personal_id` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)    If `type = PASSPORT`, this is the cardholder's passport number. Recommended for Discover ProtectBuy. 
-    attr_accessor :id
-
-    # The government agency that issued the driver's license or passport.  If **type**` = DRIVER_LICENSE`, this is the State or province where the customer’s driver’s license was issued.  If **type**` = PASSPORT`, this is the Issuing country for the cardholder’s passport. Recommended for Discover ProtectBuy.  Use the two-character [State, Province, and Territory Codes for the United States and Canada](https://developer.cybersource.com/library/documentation/sbc/quickref/states_and_provinces.pdf).  #### TeleCheck Contact your TeleCheck representative to find out whether this field is required or optional.  #### All Other Processors Not used.  For details about the country that issued the passport, see `customer_passport_country` field description in [CyberSource Payer Authentication Using the SCMP API] (https://apps.cybersource.com/library/documentation/dev_guides/Payer_Authentication_SCMP_API/html/)  For details about the state or province that issued the passport, see `driver_license_state` field description in [Electronic Check Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/EChecks_SCMP_API/html/) 
-    attr_accessor :issued_by
-
-    # Attribute mapping from ruby-style variable name to JSON key.
-    def self.attribute_map
-      {
-        :'type' => :'type',
-        :'id' => :'id',
-        :'issued_by' => :'issuedBy'
-      }
-    end
-
-    # Attribute type mapping.
-    def self.swagger_types
-      {
-        :'type' => :'String',
-        :'id' => :'String',
-        :'issued_by' => :'String'
-      }
-    end
-
-    # Initializes the object
-    # @param [Hash] attributes Model attributes in the form of hash
-    def initialize(attributes = {})
-      return unless attributes.is_a?(Hash)
-
-      # convert string to symbol for hash key
-      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
-
-      if attributes.has_key?(:'type')
-        self.type = attributes[:'type']
-      end
-
-      if attributes.has_key?(:'id')
-        self.id = attributes[:'id']
-      end
-
-      if attributes.has_key?(:'issuedBy')
-        self.issued_by = attributes[:'issuedBy']
-      end
-    end
-
-    # Show invalid properties with the reasons. Usually used together with valid?
-    # @return Array for valid properties with the reasons
-    def list_invalid_properties
-      invalid_properties = Array.new
-      if !@id.nil? && @id.to_s.length > 26
-        invalid_properties.push('invalid value for "id", the character length must be smaller than or equal to 26.')
-      end
-
-      invalid_properties
-    end
-
-    # Check to see if the all the properties in the model are valid
-    # @return true if the model is valid
-    def valid?
-      return false if !@id.nil? && @id.to_s.length > 26
-      true
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] id Value to be assigned
-    def id=(id)
-      if !id.nil? && id.to_s.length > 26
-        fail ArgumentError, 'invalid value for "id", the character length must be smaller than or equal to 26.'
-      end
-
-      @id = id
-    end
-
-    # Checks equality by comparing each attribute.
-    # @param [Object] Object to be compared
-    def ==(o)
-      return true if self.equal?(o)
-      self.class == o.class &&
-          type == o.type &&
-          id == o.id &&
-          issued_by == o.issued_by
-    end
-
-    # @see the `==` method
-    # @param [Object] Object to be compared
-    def eql?(o)
-      self == o
-    end
-
-    # Calculates hash code according to all attributes.
-    # @return [Fixnum] Hash code
-    def hash
-      [type, id, issued_by].hash
-    end
-
-    # Builds the object from hash
-    # @param [Hash] attributes Model attributes in the form of hash
-    # @return [Object] Returns the model itself
-    def build_from_hash(attributes)
-      return nil unless attributes.is_a?(Hash)
-      self.class.swagger_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
-          # check to ensure the input is an array given that the the attribute
-          # is documented as an array but the input is not
-          if attributes[self.class.attribute_map[key]].is_a?(Array)
-            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
-          end
-        elsif !attributes[self.class.attribute_map[key]].nil?
-          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
-      end
-
-      self
-    end
-
-    # Deserializes the data based on type
-    # @param string type Data type
-    # @param string value Value to be deserialized
-    # @return [Object] Deserialized data
-    def _deserialize(type, value)
-      case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
-      when :Date
-        Date.parse(value)
-      when :String
-        value.to_s
-      when :Integer
-        value.to_i
-      when :Float
-        value.to_f
-      when :BOOLEAN
-        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
-          true
-        else
-          false
-        end
-      when :Object
-        # generic object (usually a Hash), return directly
-        value
-      when /\AArray<(?<inner_type>.+)>\z/
-        inner_type = Regexp.last_match[:inner_type]
-        value.map { |v| _deserialize(inner_type, v) }
-      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
-        k_type = Regexp.last_match[:k_type]
-        v_type = Regexp.last_match[:v_type]
-        {}.tap do |hash|
-          value.each do |k, v|
-            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
-          end
-        end
-      else # model
-        temp_model = CyberSource.const_get(type).new
-        temp_model.build_from_hash(value)
-      end
-    end
-
-    # Returns the string representation of the object
-    # @return [String] String presentation of the object
-    def to_s
-      to_hash.to_s
-    end
-
-    # to_body is an alias to to_hash (backward compatibility)
-    # @return [Hash] Returns the object in the form of hash
-    def to_body
-      to_hash
-    end
-
-    # Returns the object in the form of hash
-    # @return [Hash] Returns the object in the form of hash
-    def to_hash
-      hash = {}
-      self.class.attribute_map.each_pair do |attr, param|
-        value = self.send(attr)
-        next if value.nil?
-        hash[param] = _to_hash(value)
-      end
-      hash
-    end
-
-    # Outputs non-array value in the form of hash
-    # For object, use to_hash. Otherwise, just return the value
-    # @param [Object] value Any valid value
-    # @return [Hash] Returns the value in the form of hash
-    def _to_hash(value)
-      if value.is_a?(Array)
-        value.compact.map { |v| _to_hash(v) }
-      elsif value.is_a?(Hash)
-        {}.tap do |hash|
-          value.each { |k, v| hash[k] = _to_hash(v) }
-        end
-      elsif value.respond_to? :to_hash
-        value.to_hash
-      else
-        value
-      end
-    end
-  end
-end
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class Ptsv2paymentsBuyerInformationPersonalIdentification
+    # The type of the identification.  Possible values:   - `NATIONAL`   - `CPF`   - `CPNJ`   - `CURP`   - `SSN`   - `DRIVER_LICENSE`  This field is supported only on the following processors.  #### ComercioLatino Set this field to the Cadastro de Pessoas Fisicas (CPF).  #### CyberSource Latin American Processing Supported for Redecard in Brazil. Set this field to the Cadastro de Pessoas Fisicas (CPF), which is required for AVS for Redecard in Brazil. **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  For processor-specific information, see the `personal_id` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :type
+
+    # The value of the identification type. This field is supported only on the following processors.  #### ComercioLatino Set this field to the Cadastro de Pessoas Fisicas (CPF).  #### CyberSource Latin American Processing Supported for Redecard in Brazil. Set this field to the Cadastro de Pessoas Fisicas (CPF), which is required for AVS for Redecard in Brazil. **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  For processor-specific information, see the `personal_id` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)    If `type = PASSPORT`, this is the cardholder's passport number. Recommended for Discover ProtectBuy. 
+    attr_accessor :id
+
+    # The government agency that issued the driver's license or passport.  If **type**` = DRIVER_LICENSE`, this is the State or province where the customer’s driver’s license was issued.  If **type**` = PASSPORT`, this is the Issuing country for the cardholder’s passport. Recommended for Discover ProtectBuy.  Use the two-character [State, Province, and Territory Codes for the United States and Canada](https://developer.cybersource.com/library/documentation/sbc/quickref/states_and_provinces.pdf).  #### TeleCheck Contact your TeleCheck representative to find out whether this field is required or optional.  #### All Other Processors Not used.  For details about the country that issued the passport, see `customer_passport_country` field description in [CyberSource Payer Authentication Using the SCMP API] (https://apps.cybersource.com/library/documentation/dev_guides/Payer_Authentication_SCMP_API/html/)  For details about the state or province that issued the passport, see `driver_license_state` field description in [Electronic Check Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/EChecks_SCMP_API/html/) 
+    attr_accessor :issued_by
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'type' => :'type',
+        :'id' => :'id',
+        :'issued_by' => :'issuedBy'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'type' => :'String',
+        :'id' => :'String',
+        :'issued_by' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'type')
+        self.type = attributes[:'type']
+      end
+
+      if attributes.has_key?(:'id')
+        self.id = attributes[:'id']
+      end
+
+      if attributes.has_key?(:'issuedBy')
+        self.issued_by = attributes[:'issuedBy']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] id Value to be assigned
+    def id=(id)
+      @id = id
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          type == o.type &&
+          id == o.id &&
+          issued_by == o.issued_by
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [type, id, issued_by].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end

data/lib/cybersource_rest_client/models/ptsv2payments_client_reference_information.rb

@@ -1,273 +1,255 @@
-=begin
-#CyberSource Merged Spec
-
-#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
-
-OpenAPI spec version: 0.0.1
-
-Generated by: https://github.com/swagger-api/swagger-codegen.git
-Swagger Codegen version: 2.2.3
-
-=end
-
-require 'date'
-
-module CyberSource
-  class Ptsv2paymentsClientReferenceInformation
-    # Merchant-generated order reference or tracking number. It is recommended that you send a unique value for each transaction so that you can perform meaningful searches for the transaction.  #### Used by **Authorization** Required field.  #### PIN Debit Requests for PIN debit reversals need to use the same merchant reference number that was used in the transaction that is being reversed.  Required field for all PIN Debit requests (purchase, credit, and reversal).  #### FDC Nashville Global Certain circumstances can cause the processor to truncate this value to 15 or 17 characters for Level II and Level III processing, which can cause a discrepancy between the value you submit and the value included in some processor reports. 
-    attr_accessor :code
-
-    # Identifier that you assign to the transaction.  **Note** Use this field only if you want to support merchant-initiated reversal and void operations.  #### Used by **Authorization, Authorization Reversal, Capture, Credit, and Void** Optional field.  #### PIN Debit For a PIN debit reversal, your request must include a request ID or a merchant transaction identifier.  Optional field for PIN debit purchase or credit requests. 
-    attr_accessor :transaction_id
-
-    # Comments
-    attr_accessor :comments
-
-    attr_accessor :partner
-
-    # The name of the Connection Method client (such as Virtual Terminal or SOAP Toolkit API) that the merchant uses to send a transaction request to CyberSource. 
-    attr_accessor :application_name
-
-    # Version of the CyberSource application or integration used for a transaction. 
-    attr_accessor :application_version
-
-    # The entity that is responsible for running the transaction and submitting the processing request to CyberSource. This could be a person, a system, or a connection method. 
-    attr_accessor :application_user
-
-    # Attribute mapping from ruby-style variable name to JSON key.
-    def self.attribute_map
-      {
-        :'code' => :'code',
-        :'transaction_id' => :'transactionId',
-        :'comments' => :'comments',
-        :'partner' => :'partner',
-        :'application_name' => :'applicationName',
-        :'application_version' => :'applicationVersion',
-        :'application_user' => :'applicationUser'
-      }
-    end
-
-    # Attribute type mapping.
-    def self.swagger_types
-      {
-        :'code' => :'String',
-        :'transaction_id' => :'String',
-        :'comments' => :'String',
-        :'partner' => :'Ptsv2paymentsClientReferenceInformationPartner',
-        :'application_name' => :'String',
-        :'application_version' => :'String',
-        :'application_user' => :'String'
-      }
-    end
-
-    # Initializes the object
-    # @param [Hash] attributes Model attributes in the form of hash
-    def initialize(attributes = {})
-      return unless attributes.is_a?(Hash)
-
-      # convert string to symbol for hash key
-      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
-
-      if attributes.has_key?(:'code')
-        self.code = attributes[:'code']
-      end
-
-      if attributes.has_key?(:'transactionId')
-        self.transaction_id = attributes[:'transactionId']
-      end
-
-      if attributes.has_key?(:'comments')
-        self.comments = attributes[:'comments']
-      end
-
-      if attributes.has_key?(:'partner')
-        self.partner = attributes[:'partner']
-      end
-
-      if attributes.has_key?(:'applicationName')
-        self.application_name = attributes[:'applicationName']
-      end
-
-      if attributes.has_key?(:'applicationVersion')
-        self.application_version = attributes[:'applicationVersion']
-      end
-
-      if attributes.has_key?(:'applicationUser')
-        self.application_user = attributes[:'applicationUser']
-      end
-    end
-
-    # Show invalid properties with the reasons. Usually used together with valid?
-    # @return Array for valid properties with the reasons
-    def list_invalid_properties
-      invalid_properties = Array.new
-      if !@code.nil? && @code.to_s.length > 50
-        invalid_properties.push('invalid value for "code", the character length must be smaller than or equal to 50.')
-      end
-
-      if !@transaction_id.nil? && @transaction_id.to_s.length > 30
-        invalid_properties.push('invalid value for "transaction_id", the character length must be smaller than or equal to 30.')
-      end
-
-      invalid_properties
-    end
-
-    # Check to see if the all the properties in the model are valid
-    # @return true if the model is valid
-    def valid?
-      return false if !@code.nil? && @code.to_s.length > 50
-      return false if !@transaction_id.nil? && @transaction_id.to_s.length > 30
-      true
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] code Value to be assigned
-    def code=(code)
-      if !code.nil? && code.to_s.length > 50
-        fail ArgumentError, 'invalid value for "code", the character length must be smaller than or equal to 50.'
-      end
-
-      @code = code
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] transaction_id Value to be assigned
-    def transaction_id=(transaction_id)
-      if !transaction_id.nil? && transaction_id.to_s.length > 30
-        fail ArgumentError, 'invalid value for "transaction_id", the character length must be smaller than or equal to 30.'
-      end
-
-      @transaction_id = transaction_id
-    end
-
-    # Checks equality by comparing each attribute.
-    # @param [Object] Object to be compared
-    def ==(o)
-      return true if self.equal?(o)
-      self.class == o.class &&
-          code == o.code &&
-          transaction_id == o.transaction_id &&
-          comments == o.comments &&
-          partner == o.partner &&
-          application_name == o.application_name &&
-          application_version == o.application_version &&
-          application_user == o.application_user
-    end
-
-    # @see the `==` method
-    # @param [Object] Object to be compared
-    def eql?(o)
-      self == o
-    end
-
-    # Calculates hash code according to all attributes.
-    # @return [Fixnum] Hash code
-    def hash
-      [code, transaction_id, comments, partner, application_name, application_version, application_user].hash
-    end
-
-    # Builds the object from hash
-    # @param [Hash] attributes Model attributes in the form of hash
-    # @return [Object] Returns the model itself
-    def build_from_hash(attributes)
-      return nil unless attributes.is_a?(Hash)
-      self.class.swagger_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
-          # check to ensure the input is an array given that the the attribute
-          # is documented as an array but the input is not
-          if attributes[self.class.attribute_map[key]].is_a?(Array)
-            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
-          end
-        elsif !attributes[self.class.attribute_map[key]].nil?
-          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
-      end
-
-      self
-    end
-
-    # Deserializes the data based on type
-    # @param string type Data type
-    # @param string value Value to be deserialized
-    # @return [Object] Deserialized data
-    def _deserialize(type, value)
-      case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
-      when :Date
-        Date.parse(value)
-      when :String
-        value.to_s
-      when :Integer
-        value.to_i
-      when :Float
-        value.to_f
-      when :BOOLEAN
-        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
-          true
-        else
-          false
-        end
-      when :Object
-        # generic object (usually a Hash), return directly
-        value
-      when /\AArray<(?<inner_type>.+)>\z/
-        inner_type = Regexp.last_match[:inner_type]
-        value.map { |v| _deserialize(inner_type, v) }
-      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
-        k_type = Regexp.last_match[:k_type]
-        v_type = Regexp.last_match[:v_type]
-        {}.tap do |hash|
-          value.each do |k, v|
-            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
-          end
-        end
-      else # model
-        temp_model = CyberSource.const_get(type).new
-        temp_model.build_from_hash(value)
-      end
-    end
-
-    # Returns the string representation of the object
-    # @return [String] String presentation of the object
-    def to_s
-      to_hash.to_s
-    end
-
-    # to_body is an alias to to_hash (backward compatibility)
-    # @return [Hash] Returns the object in the form of hash
-    def to_body
-      to_hash
-    end
-
-    # Returns the object in the form of hash
-    # @return [Hash] Returns the object in the form of hash
-    def to_hash
-      hash = {}
-      self.class.attribute_map.each_pair do |attr, param|
-        value = self.send(attr)
-        next if value.nil?
-        hash[param] = _to_hash(value)
-      end
-      hash
-    end
-
-    # Outputs non-array value in the form of hash
-    # For object, use to_hash. Otherwise, just return the value
-    # @param [Object] value Any valid value
-    # @return [Hash] Returns the value in the form of hash
-    def _to_hash(value)
-      if value.is_a?(Array)
-        value.compact.map { |v| _to_hash(v) }
-      elsif value.is_a?(Hash)
-        {}.tap do |hash|
-          value.each { |k, v| hash[k] = _to_hash(v) }
-        end
-      elsif value.respond_to? :to_hash
-        value.to_hash
-      else
-        value
-      end
-    end
-  end
-end
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class Ptsv2paymentsClientReferenceInformation
+    # Merchant-generated order reference or tracking number. It is recommended that you send a unique value for each transaction so that you can perform meaningful searches for the transaction.  #### Used by **Authorization** Required field.  #### PIN Debit Requests for PIN debit reversals need to use the same merchant reference number that was used in the transaction that is being reversed.  Required field for all PIN Debit requests (purchase, credit, and reversal).  #### FDC Nashville Global Certain circumstances can cause the processor to truncate this value to 15 or 17 characters for Level II and Level III processing, which can cause a discrepancy between the value you submit and the value included in some processor reports. 
+    attr_accessor :code
+
+    # Identifier that you assign to the transaction.  **Note** Use this field only if you want to support merchant-initiated reversal and void operations.  #### Used by **Authorization, Authorization Reversal, Capture, Credit, and Void** Optional field.  #### PIN Debit For a PIN debit reversal, your request must include a request ID or a merchant transaction identifier.  Optional field for PIN debit purchase or credit requests. 
+    attr_accessor :transaction_id
+
+    # Comments
+    attr_accessor :comments
+
+    attr_accessor :partner
+
+    # The name of the Connection Method client (such as Virtual Terminal or SOAP Toolkit API) that the merchant uses to send a transaction request to CyberSource. 
+    attr_accessor :application_name
+
+    # Version of the CyberSource application or integration used for a transaction. 
+    attr_accessor :application_version
+
+    # The entity that is responsible for running the transaction and submitting the processing request to CyberSource. This could be a person, a system, or a connection method. 
+    attr_accessor :application_user
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'code' => :'code',
+        :'transaction_id' => :'transactionId',
+        :'comments' => :'comments',
+        :'partner' => :'partner',
+        :'application_name' => :'applicationName',
+        :'application_version' => :'applicationVersion',
+        :'application_user' => :'applicationUser'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'code' => :'String',
+        :'transaction_id' => :'String',
+        :'comments' => :'String',
+        :'partner' => :'Ptsv2paymentsClientReferenceInformationPartner',
+        :'application_name' => :'String',
+        :'application_version' => :'String',
+        :'application_user' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'code')
+        self.code = attributes[:'code']
+      end
+
+      if attributes.has_key?(:'transactionId')
+        self.transaction_id = attributes[:'transactionId']
+      end
+
+      if attributes.has_key?(:'comments')
+        self.comments = attributes[:'comments']
+      end
+
+      if attributes.has_key?(:'partner')
+        self.partner = attributes[:'partner']
+      end
+
+      if attributes.has_key?(:'applicationName')
+        self.application_name = attributes[:'applicationName']
+      end
+
+      if attributes.has_key?(:'applicationVersion')
+        self.application_version = attributes[:'applicationVersion']
+      end
+
+      if attributes.has_key?(:'applicationUser')
+        self.application_user = attributes[:'applicationUser']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] code Value to be assigned
+    def code=(code)
+      @code = code
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] transaction_id Value to be assigned
+    def transaction_id=(transaction_id)
+      @transaction_id = transaction_id
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          code == o.code &&
+          transaction_id == o.transaction_id &&
+          comments == o.comments &&
+          partner == o.partner &&
+          application_name == o.application_name &&
+          application_version == o.application_version &&
+          application_user == o.application_user
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [code, transaction_id, comments, partner, application_name, application_version, application_user].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end