cybersource_rest_client 0.0.11 → 0.0.13

data/lib/cybersource_rest_client/models/{tss_v2_transactions_post201_response__embedded_order_information_amount_details.rb → riskv1decisions_order_information_amount_details.rb}

@@ -1,7 +1,7 @@
 =begin
-#CyberSource Flex API
+#CyberSource Merged Spec
 
-#Simple PAN tokenization service
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
 
 OpenAPI spec version: 0.0.1
 
@@ -13,26 +13,27 @@ Swagger Codegen version: 2.2.3
 require 'date'
 
 module CyberSource
-  class TssV2TransactionsPost201ResponseEmbeddedOrderInformationAmountDetails
-    # Grand total for the order. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  * CTV, FDCCompass, Paymentech (<= 12)  For processor-specific information, see the grand_total_amount field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :total_amount
-
-    # Currency used for the order. Use the three-character ISO Standard Currency Codes.  For an authorization reversal or a capture, you must use the same currency that you used in your request for Payment API. 
+  # Contains `currency` and `totalAmount` for this order.
+  class Riskv1decisionsOrderInformationAmountDetails
+    # Currency used for the order. Use the three-character ISO Standard Currency Codes.  For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your request for Payment API.  **DCC for First Data**\\ Your local currency. For details, see \"Dynamic Currency Conversion for First Data,\" page 113. 
     attr_accessor :currency
 
+    # Grand total for the order. This value cannot be negative. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  **Note** For CTV, FDCCompass, Paymentech processors, the maximum length for this field is 12.  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. This information is covered in:  Table 15, \"Authorization Information for Specific Processors,\" on page 43  Table 19, \"Capture Information for Specific Processors,\" on page 58  Table 23, \"Credit Information for Specific Processors,\" on page 75 If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. See \"Zero Amount Authorizations,\" page 247.  **DCC with a Third-Party Provider**\\ Set this field to the converted amount that was returned by the DCC provider. You must include either this field or offer0 and the offerlevel field amount in your request. For details, see \"Dynamic Currency Conversion with a Third Party Provider,\" page 125.  **FDMS South**\\ If you accept IDR or CLP currencies, see the entry for FDMS South in Table 15, \"Authorization Information for Specific Processors,\" on page 43.  **DCC for First Data**\\ Not used. 
+    attr_accessor :total_amount
+
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
-        :'total_amount' => :'totalAmount',
-        :'currency' => :'currency'
+        :'currency' => :'currency',
+        :'total_amount' => :'totalAmount'
       }
     end
 
     # Attribute type mapping.
     def self.swagger_types
       {
-        :'total_amount' => :'String',
-        :'currency' => :'String'
+        :'currency' => :'String',
+        :'total_amount' => :'String'
       }
     end
 
@@ -44,56 +45,65 @@ module CyberSource
       # convert string to symbol for hash key
       attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
 
-      if attributes.has_key?(:'totalAmount')
-        self.total_amount = attributes[:'totalAmount']
-      end
-
       if attributes.has_key?(:'currency')
         self.currency = attributes[:'currency']
       end
+
+      if attributes.has_key?(:'totalAmount')
+        self.total_amount = attributes[:'totalAmount']
+      end
     end
 
     # Show invalid properties with the reasons. Usually used together with valid?
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@total_amount.nil? && @total_amount.to_s.length > 19
-        invalid_properties.push('invalid value for "total_amount", the character length must be smaller than or equal to 19.')
+      if @currency.nil?
+        invalid_properties.push('invalid value for "currency", currency cannot be nil.')
       end
 
-      if !@currency.nil? && @currency.to_s.length > 3
+      if @currency.to_s.length > 3
         invalid_properties.push('invalid value for "currency", the character length must be smaller than or equal to 3.')
       end
 
+      if !@total_amount.nil? && @total_amount.to_s.length > 19
+        invalid_properties.push('invalid value for "total_amount", the character length must be smaller than or equal to 19.')
+      end
+
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
+      return false if @currency.nil?
+      return false if @currency.to_s.length > 3
       return false if !@total_amount.nil? && @total_amount.to_s.length > 19
-      return false if !@currency.nil? && @currency.to_s.length > 3
       true
     end
 
     # Custom attribute writer method with validation
-    # @param [Object] total_amount Value to be assigned
-    def total_amount=(total_amount)
-      if !total_amount.nil? && total_amount.to_s.length > 19
-        fail ArgumentError, 'invalid value for "total_amount", the character length must be smaller than or equal to 19.'
+    # @param [Object] currency Value to be assigned
+    def currency=(currency)
+      if currency.nil?
+        fail ArgumentError, 'currency cannot be nil'
       end
 
-      @total_amount = total_amount
+      if currency.to_s.length > 3
+        fail ArgumentError, 'invalid value for "currency", the character length must be smaller than or equal to 3.'
+      end
+
+      @currency = currency
     end
 
     # Custom attribute writer method with validation
-    # @param [Object] currency Value to be assigned
-    def currency=(currency)
-      if !currency.nil? && currency.to_s.length > 3
-        fail ArgumentError, 'invalid value for "currency", the character length must be smaller than or equal to 3.'
+    # @param [Object] total_amount Value to be assigned
+    def total_amount=(total_amount)
+      if !total_amount.nil? && total_amount.to_s.length > 19
+        fail ArgumentError, 'invalid value for "total_amount", the character length must be smaller than or equal to 19.'
       end
 
-      @currency = currency
+      @total_amount = total_amount
     end
 
     # Checks equality by comparing each attribute.
@@ -101,8 +111,8 @@ module CyberSource
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          total_amount == o.total_amount &&
-          currency == o.currency
+          currency == o.currency &&
+          total_amount == o.total_amount
     end
 
     # @see the `==` method
@@ -114,7 +124,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [total_amount, currency].hash
+      [currency, total_amount].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/riskv1decisions_order_information_bill_to.rb

@@ -0,0 +1,424 @@
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class Riskv1decisionsOrderInformationBillTo
+    # First line of the billing street address as it appears on the credit card issuer’s records.  **Atos** This field must not contain colons (:).  **CyberSource through VisaNet** **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **For Payouts**: This field may be sent only for FDC Compass.  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the bill_address1 field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :address1
+
+    # Additional address information.  For Payouts: This field may be sent only for FDC Compass.  **Atos** This field must not contain colons (:).  **Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions** This value is used for AVS.  **CyberSource through VisaNet** **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the bill_address2 field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :address2
+
+    # State or province of the billing address. Use the State, Province, and Territory Codes for the United States and Canada.  For Payouts: This field may be sent only for FDC Compass.  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the bill_state field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :administrative_area
+
+    # Country of the billing address. Use the two-character ISO Standard Country Codes.  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the bill_country field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :country
+
+    # City of the billing address.  **Atos** This field must not contain colons (:).  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **For Payouts**: This field may be sent only for FDC Compass.  For processor-specific information, see the bill_city field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :locality
+
+    # Customer’s first name. This name must be the same as the name on the card.  **CyberSource Latin American Processing**\\ **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  **CyberSource through VisaNet**\\ Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **For Payouts**:\\ This field may be sent only for FDC Compass.  ccAuthService\\ (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the customer_firstname field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :first_name
+
+    # Customer’s last name. This name must be the same as the name on the card.  **CyberSource Latin American Processing**\\ **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  **CyberSource through VisaNet**\\ Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  ccAuthService\\ (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  **For Payouts** : This field may be sent only for FDC Compass.  For processor-specific information, see the customer_lastname field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :last_name
+
+    # Customer’s phone number.  For Payouts: This field may be sent only for FDC Compass.  CyberSource recommends that you include the country code when the order is from outside the U.S.  For processor-specific information, see the customer_phone field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks. 
+    attr_accessor :phone_number
+
+    # Customer's email address, including the full domain name.  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. Important It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the customer_email field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :email
+
+    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  Example 12345-6789  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  Example A1B 2C3  ccAuthService (Required when the billing country is the U.S. or Canada; otherwise, optional.) This field is optional if your CyberSource account is configured for relaxed requirements for address data and expiration date. See \"Relaxed Requirements for Address Data and Expiration Date,\" page 75. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For Payouts: This field may be sent only for FDC Compass.  **American Express Direct** Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  **Atos** This field must not contain colons (:).  **CyberSource through VisaNet** Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the bill_zip field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :postal_code
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'address1' => :'address1',
+        :'address2' => :'address2',
+        :'administrative_area' => :'administrativeArea',
+        :'country' => :'country',
+        :'locality' => :'locality',
+        :'first_name' => :'firstName',
+        :'last_name' => :'lastName',
+        :'phone_number' => :'phoneNumber',
+        :'email' => :'email',
+        :'postal_code' => :'postalCode'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'address1' => :'String',
+        :'address2' => :'String',
+        :'administrative_area' => :'String',
+        :'country' => :'String',
+        :'locality' => :'String',
+        :'first_name' => :'String',
+        :'last_name' => :'String',
+        :'phone_number' => :'String',
+        :'email' => :'String',
+        :'postal_code' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'address1')
+        self.address1 = attributes[:'address1']
+      end
+
+      if attributes.has_key?(:'address2')
+        self.address2 = attributes[:'address2']
+      end
+
+      if attributes.has_key?(:'administrativeArea')
+        self.administrative_area = attributes[:'administrativeArea']
+      end
+
+      if attributes.has_key?(:'country')
+        self.country = attributes[:'country']
+      end
+
+      if attributes.has_key?(:'locality')
+        self.locality = attributes[:'locality']
+      end
+
+      if attributes.has_key?(:'firstName')
+        self.first_name = attributes[:'firstName']
+      end
+
+      if attributes.has_key?(:'lastName')
+        self.last_name = attributes[:'lastName']
+      end
+
+      if attributes.has_key?(:'phoneNumber')
+        self.phone_number = attributes[:'phoneNumber']
+      end
+
+      if attributes.has_key?(:'email')
+        self.email = attributes[:'email']
+      end
+
+      if attributes.has_key?(:'postalCode')
+        self.postal_code = attributes[:'postalCode']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if !@address1.nil? && @address1.to_s.length > 60
+        invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@address2.nil? && @address2.to_s.length > 60
+        invalid_properties.push('invalid value for "address2", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@administrative_area.nil? && @administrative_area.to_s.length > 2
+        invalid_properties.push('invalid value for "administrative_area", the character length must be smaller than or equal to 2.')
+      end
+
+      if !@country.nil? && @country.to_s.length > 2
+        invalid_properties.push('invalid value for "country", the character length must be smaller than or equal to 2.')
+      end
+
+      if !@locality.nil? && @locality.to_s.length > 50
+        invalid_properties.push('invalid value for "locality", the character length must be smaller than or equal to 50.')
+      end
+
+      if !@first_name.nil? && @first_name.to_s.length > 60
+        invalid_properties.push('invalid value for "first_name", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@last_name.nil? && @last_name.to_s.length > 60
+        invalid_properties.push('invalid value for "last_name", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@phone_number.nil? && @phone_number.to_s.length > 15
+        invalid_properties.push('invalid value for "phone_number", the character length must be smaller than or equal to 15.')
+      end
+
+      if !@email.nil? && @email.to_s.length > 255
+        invalid_properties.push('invalid value for "email", the character length must be smaller than or equal to 255.')
+      end
+
+      if !@postal_code.nil? && @postal_code.to_s.length > 10
+        invalid_properties.push('invalid value for "postal_code", the character length must be smaller than or equal to 10.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if !@address1.nil? && @address1.to_s.length > 60
+      return false if !@address2.nil? && @address2.to_s.length > 60
+      return false if !@administrative_area.nil? && @administrative_area.to_s.length > 2
+      return false if !@country.nil? && @country.to_s.length > 2
+      return false if !@locality.nil? && @locality.to_s.length > 50
+      return false if !@first_name.nil? && @first_name.to_s.length > 60
+      return false if !@last_name.nil? && @last_name.to_s.length > 60
+      return false if !@phone_number.nil? && @phone_number.to_s.length > 15
+      return false if !@email.nil? && @email.to_s.length > 255
+      return false if !@postal_code.nil? && @postal_code.to_s.length > 10
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address1 Value to be assigned
+    def address1=(address1)
+      if !address1.nil? && address1.to_s.length > 60
+        fail ArgumentError, 'invalid value for "address1", the character length must be smaller than or equal to 60.'
+      end
+
+      @address1 = address1
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address2 Value to be assigned
+    def address2=(address2)
+      if !address2.nil? && address2.to_s.length > 60
+        fail ArgumentError, 'invalid value for "address2", the character length must be smaller than or equal to 60.'
+      end
+
+      @address2 = address2
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] administrative_area Value to be assigned
+    def administrative_area=(administrative_area)
+      if !administrative_area.nil? && administrative_area.to_s.length > 2
+        fail ArgumentError, 'invalid value for "administrative_area", the character length must be smaller than or equal to 2.'
+      end
+
+      @administrative_area = administrative_area
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] country Value to be assigned
+    def country=(country)
+      if !country.nil? && country.to_s.length > 2
+        fail ArgumentError, 'invalid value for "country", the character length must be smaller than or equal to 2.'
+      end
+
+      @country = country
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] locality Value to be assigned
+    def locality=(locality)
+      if !locality.nil? && locality.to_s.length > 50
+        fail ArgumentError, 'invalid value for "locality", the character length must be smaller than or equal to 50.'
+      end
+
+      @locality = locality
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] first_name Value to be assigned
+    def first_name=(first_name)
+      if !first_name.nil? && first_name.to_s.length > 60
+        fail ArgumentError, 'invalid value for "first_name", the character length must be smaller than or equal to 60.'
+      end
+
+      @first_name = first_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] last_name Value to be assigned
+    def last_name=(last_name)
+      if !last_name.nil? && last_name.to_s.length > 60
+        fail ArgumentError, 'invalid value for "last_name", the character length must be smaller than or equal to 60.'
+      end
+
+      @last_name = last_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] phone_number Value to be assigned
+    def phone_number=(phone_number)
+      if !phone_number.nil? && phone_number.to_s.length > 15
+        fail ArgumentError, 'invalid value for "phone_number", the character length must be smaller than or equal to 15.'
+      end
+
+      @phone_number = phone_number
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] email Value to be assigned
+    def email=(email)
+      if !email.nil? && email.to_s.length > 255
+        fail ArgumentError, 'invalid value for "email", the character length must be smaller than or equal to 255.'
+      end
+
+      @email = email
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] postal_code Value to be assigned
+    def postal_code=(postal_code)
+      if !postal_code.nil? && postal_code.to_s.length > 10
+        fail ArgumentError, 'invalid value for "postal_code", the character length must be smaller than or equal to 10.'
+      end
+
+      @postal_code = postal_code
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          address1 == o.address1 &&
+          address2 == o.address2 &&
+          administrative_area == o.administrative_area &&
+          country == o.country &&
+          locality == o.locality &&
+          first_name == o.first_name &&
+          last_name == o.last_name &&
+          phone_number == o.phone_number &&
+          email == o.email &&
+          postal_code == o.postal_code
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [address1, address2, administrative_area, country, locality, first_name, last_name, phone_number, email, postal_code].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end