cppjieba_rb 0.3.3 → 0.4.0

data/ext/cppjieba/deps/gtest/src/gtest-all.cc

@@ -1,48 +0,0 @@
-// Copyright 2008, Google Inc.
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-// Author: mheule@google.com (Markus Heule)
-//
-// Google C++ Testing Framework (Google Test)
-//
-// Sometimes it's desirable to build Google Test by compiling a single file.
-// This file serves this purpose.
-
-// This line ensures that gtest.h can be compiled on its own, even
-// when it's fused.
-#include "gtest/gtest.h"
-
-// The following lines pull in the real gtest *.cc files.
-#include "src/gtest.cc"
-#include "src/gtest-death-test.cc"
-#include "src/gtest-filepath.cc"
-#include "src/gtest-port.cc"
-#include "src/gtest-printers.cc"
-#include "src/gtest-test-part.cc"
-#include "src/gtest-typed-test.cc"

data/ext/cppjieba/deps/gtest/src/gtest-death-test.cc

@@ -1,1234 +0,0 @@
-// Copyright 2005, Google Inc.
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-// Author: wan@google.com (Zhanyong Wan), vladl@google.com (Vlad Losev)
-//
-// This file implements death tests.
-
-#include "gtest/gtest-death-test.h"
-#include "gtest/internal/gtest-port.h"
-
-#if GTEST_HAS_DEATH_TEST
-
-# if GTEST_OS_MAC
-#  include <crt_externs.h>
-# endif  // GTEST_OS_MAC
-
-# include <errno.h>
-# include <fcntl.h>
-# include <limits.h>
-# include <stdarg.h>
-
-# if GTEST_OS_WINDOWS
-#  include <windows.h>
-# else
-#  include <sys/mman.h>
-#  include <sys/wait.h>
-# endif  // GTEST_OS_WINDOWS
-
-#endif  // GTEST_HAS_DEATH_TEST
-
-#include "gtest/gtest-message.h"
-#include "gtest/internal/gtest-string.h"
-
-// Indicates that this translation unit is part of Google Test's
-// implementation.  It must come before gtest-internal-inl.h is
-// included, or there will be a compiler error.  This trick is to
-// prevent a user from accidentally including gtest-internal-inl.h in
-// his code.
-#define GTEST_IMPLEMENTATION_ 1
-#include "src/gtest-internal-inl.h"
-#undef GTEST_IMPLEMENTATION_
-
-namespace testing {
-
-// Constants.
-
-// The default death test style.
-static const char kDefaultDeathTestStyle[] = "fast";
-
-GTEST_DEFINE_string_(
-    death_test_style,
-    internal::StringFromGTestEnv("death_test_style", kDefaultDeathTestStyle),
-    "Indicates how to run a death test in a forked child process: "
-    "\"threadsafe\" (child process re-executes the test binary "
-    "from the beginning, running only the specific death test) or "
-    "\"fast\" (child process runs the death test immediately "
-    "after forking).");
-
-GTEST_DEFINE_bool_(
-    death_test_use_fork,
-    internal::BoolFromGTestEnv("death_test_use_fork", false),
-    "Instructs to use fork()/_exit() instead of clone() in death tests. "
-    "Ignored and always uses fork() on POSIX systems where clone() is not "
-    "implemented. Useful when running under valgrind or similar tools if "
-    "those do not support clone(). Valgrind 3.3.1 will just fail if "
-    "it sees an unsupported combination of clone() flags. "
-    "It is not recommended to use this flag w/o valgrind though it will "
-    "work in 99% of the cases. Once valgrind is fixed, this flag will "
-    "most likely be removed.");
-
-namespace internal {
-GTEST_DEFINE_string_(
-    internal_run_death_test, "",
-    "Indicates the file, line number, temporal index of "
-    "the single death test to run, and a file descriptor to "
-    "which a success code may be sent, all separated by "
-    "colons.  This flag is specified if and only if the current "
-    "process is a sub-process launched for running a thread-safe "
-    "death test.  FOR INTERNAL USE ONLY.");
-}  // namespace internal
-
-#if GTEST_HAS_DEATH_TEST
-
-// ExitedWithCode constructor.
-ExitedWithCode::ExitedWithCode(int exit_code) : exit_code_(exit_code) {
-}
-
-// ExitedWithCode function-call operator.
-bool ExitedWithCode::operator()(int exit_status) const {
-# if GTEST_OS_WINDOWS
-
-  return exit_status == exit_code_;
-
-# else
-
-  return WIFEXITED(exit_status) && WEXITSTATUS(exit_status) == exit_code_;
-
-# endif  // GTEST_OS_WINDOWS
-}
-
-# if !GTEST_OS_WINDOWS
-// KilledBySignal constructor.
-KilledBySignal::KilledBySignal(int signum) : signum_(signum) {
-}
-
-// KilledBySignal function-call operator.
-bool KilledBySignal::operator()(int exit_status) const {
-  return WIFSIGNALED(exit_status) && WTERMSIG(exit_status) == signum_;
-}
-# endif  // !GTEST_OS_WINDOWS
-
-namespace internal {
-
-// Utilities needed for death tests.
-
-// Generates a textual description of a given exit code, in the format
-// specified by wait(2).
-static String ExitSummary(int exit_code) {
-  Message m;
-
-# if GTEST_OS_WINDOWS
-
-  m << "Exited with exit status " << exit_code;
-
-# else
-
-  if (WIFEXITED(exit_code)) {
-    m << "Exited with exit status " << WEXITSTATUS(exit_code);
-  } else if (WIFSIGNALED(exit_code)) {
-    m << "Terminated by signal " << WTERMSIG(exit_code);
-  }
-#  ifdef WCOREDUMP
-  if (WCOREDUMP(exit_code)) {
-    m << " (core dumped)";
-  }
-#  endif
-# endif  // GTEST_OS_WINDOWS
-
-  return m.GetString();
-}
-
-// Returns true if exit_status describes a process that was terminated
-// by a signal, or exited normally with a nonzero exit code.
-bool ExitedUnsuccessfully(int exit_status) {
-  return !ExitedWithCode(0)(exit_status);
-}
-
-# if !GTEST_OS_WINDOWS
-// Generates a textual failure message when a death test finds more than
-// one thread running, or cannot determine the number of threads, prior
-// to executing the given statement.  It is the responsibility of the
-// caller not to pass a thread_count of 1.
-static String DeathTestThreadWarning(size_t thread_count) {
-  Message msg;
-  msg << "Death tests use fork(), which is unsafe particularly"
-      << " in a threaded context. For this test, " << GTEST_NAME_ << " ";
-  if (thread_count == 0)
-    msg << "couldn't detect the number of threads.";
-  else
-    msg << "detected " << thread_count << " threads.";
-  return msg.GetString();
-}
-# endif  // !GTEST_OS_WINDOWS
-
-// Flag characters for reporting a death test that did not die.
-static const char kDeathTestLived = 'L';
-static const char kDeathTestReturned = 'R';
-static const char kDeathTestThrew = 'T';
-static const char kDeathTestInternalError = 'I';
-
-// An enumeration describing all of the possible ways that a death test can
-// conclude.  DIED means that the process died while executing the test
-// code; LIVED means that process lived beyond the end of the test code;
-// RETURNED means that the test statement attempted to execute a return
-// statement, which is not allowed; THREW means that the test statement
-// returned control by throwing an exception.  IN_PROGRESS means the test
-// has not yet concluded.
-// TODO(vladl@google.com): Unify names and possibly values for
-// AbortReason, DeathTestOutcome, and flag characters above.
-enum DeathTestOutcome { IN_PROGRESS, DIED, LIVED, RETURNED, THREW };
-
-// Routine for aborting the program which is safe to call from an
-// exec-style death test child process, in which case the error
-// message is propagated back to the parent process.  Otherwise, the
-// message is simply printed to stderr.  In either case, the program
-// then exits with status 1.
-void DeathTestAbort(const String& message) {
-  // On a POSIX system, this function may be called from a threadsafe-style
-  // death test child process, which operates on a very small stack.  Use
-  // the heap for any additional non-minuscule memory requirements.
-  const InternalRunDeathTestFlag* const flag =
-      GetUnitTestImpl()->internal_run_death_test_flag();
-  if (flag != NULL) {
-    FILE* parent = posix::FDOpen(flag->write_fd(), "w");
-    fputc(kDeathTestInternalError, parent);
-    fprintf(parent, "%s", message.c_str());
-    fflush(parent);
-    _exit(1);
-  } else {
-    fprintf(stderr, "%s", message.c_str());
-    fflush(stderr);
-    posix::Abort();
-  }
-}
-
-// A replacement for CHECK that calls DeathTestAbort if the assertion
-// fails.
-# define GTEST_DEATH_TEST_CHECK_(expression) \
-  do { \
-    if (!::testing::internal::IsTrue(expression)) { \
-      DeathTestAbort(::testing::internal::String::Format( \
-          "CHECK failed: File %s, line %d: %s", \
-          __FILE__, __LINE__, #expression)); \
-    } \
-  } while (::testing::internal::AlwaysFalse())
-
-// This macro is similar to GTEST_DEATH_TEST_CHECK_, but it is meant for
-// evaluating any system call that fulfills two conditions: it must return
-// -1 on failure, and set errno to EINTR when it is interrupted and
-// should be tried again.  The macro expands to a loop that repeatedly
-// evaluates the expression as long as it evaluates to -1 and sets
-// errno to EINTR.  If the expression evaluates to -1 but errno is
-// something other than EINTR, DeathTestAbort is called.
-# define GTEST_DEATH_TEST_CHECK_SYSCALL_(expression) \
-  do { \
-    int gtest_retval; \
-    do { \
-      gtest_retval = (expression); \
-    } while (gtest_retval == -1 && errno == EINTR); \
-    if (gtest_retval == -1) { \
-      DeathTestAbort(::testing::internal::String::Format( \
-          "CHECK failed: File %s, line %d: %s != -1", \
-          __FILE__, __LINE__, #expression)); \
-    } \
-  } while (::testing::internal::AlwaysFalse())
-
-// Returns the message describing the last system error in errno.
-String GetLastErrnoDescription() {
-    return String(errno == 0 ? "" : posix::StrError(errno));
-}
-
-// This is called from a death test parent process to read a failure
-// message from the death test child process and log it with the FATAL
-// severity. On Windows, the message is read from a pipe handle. On other
-// platforms, it is read from a file descriptor.
-static void FailFromInternalError(int fd) {
-  Message error;
-  char buffer[256];
-  int num_read;
-
-  do {
-    while ((num_read = posix::Read(fd, buffer, 255)) > 0) {
-      buffer[num_read] = '\0';
-      error << buffer;
-    }
-  } while (num_read == -1 && errno == EINTR);
-
-  if (num_read == 0) {
-    GTEST_LOG_(FATAL) << error.GetString();
-  } else {
-    const int last_error = errno;
-    GTEST_LOG_(FATAL) << "Error while reading death test internal: "
-                      << GetLastErrnoDescription() << " [" << last_error << "]";
-  }
-}
-
-// Death test constructor.  Increments the running death test count
-// for the current test.
-DeathTest::DeathTest() {
-  TestInfo* const info = GetUnitTestImpl()->current_test_info();
-  if (info == NULL) {
-    DeathTestAbort("Cannot run a death test outside of a TEST or "
-                   "TEST_F construct");
-  }
-}
-
-// Creates and returns a death test by dispatching to the current
-// death test factory.
-bool DeathTest::Create(const char* statement, const RE* regex,
-                       const char* file, int line, DeathTest** test) {
-  return GetUnitTestImpl()->death_test_factory()->Create(
-      statement, regex, file, line, test);
-}
-
-const char* DeathTest::LastMessage() {
-  return last_death_test_message_.c_str();
-}
-
-void DeathTest::set_last_death_test_message(const String& message) {
-  last_death_test_message_ = message;
-}
-
-String DeathTest::last_death_test_message_;
-
-// Provides cross platform implementation for some death functionality.
-class DeathTestImpl : public DeathTest {
- protected:
-  DeathTestImpl(const char* a_statement, const RE* a_regex)
-      : statement_(a_statement),
-        regex_(a_regex),
-        spawned_(false),
-        status_(-1),
-        outcome_(IN_PROGRESS),
-        read_fd_(-1),
-        write_fd_(-1) {}
-
-  // read_fd_ is expected to be closed and cleared by a derived class.
-  ~DeathTestImpl() { GTEST_DEATH_TEST_CHECK_(read_fd_ == -1); }
-
-  void Abort(AbortReason reason);
-  virtual bool Passed(bool status_ok);
-
-  const char* statement() const { return statement_; }
-  const RE* regex() const { return regex_; }
-  bool spawned() const { return spawned_; }
-  void set_spawned(bool is_spawned) { spawned_ = is_spawned; }
-  int status() const { return status_; }
-  void set_status(int a_status) { status_ = a_status; }
-  DeathTestOutcome outcome() const { return outcome_; }
-  void set_outcome(DeathTestOutcome an_outcome) { outcome_ = an_outcome; }
-  int read_fd() const { return read_fd_; }
-  void set_read_fd(int fd) { read_fd_ = fd; }
-  int write_fd() const { return write_fd_; }
-  void set_write_fd(int fd) { write_fd_ = fd; }
-
-  // Called in the parent process only. Reads the result code of the death
-  // test child process via a pipe, interprets it to set the outcome_
-  // member, and closes read_fd_.  Outputs diagnostics and terminates in
-  // case of unexpected codes.
-  void ReadAndInterpretStatusByte();
-
- private:
-  // The textual content of the code this object is testing.  This class
-  // doesn't own this string and should not attempt to delete it.
-  const char* const statement_;
-  // The regular expression which test output must match.  DeathTestImpl
-  // doesn't own this object and should not attempt to delete it.
-  const RE* const regex_;
-  // True if the death test child process has been successfully spawned.
-  bool spawned_;
-  // The exit status of the child process.
-  int status_;
-  // How the death test concluded.
-  DeathTestOutcome outcome_;
-  // Descriptor to the read end of the pipe to the child process.  It is
-  // always -1 in the child process.  The child keeps its write end of the
-  // pipe in write_fd_.
-  int read_fd_;
-  // Descriptor to the child's write end of the pipe to the parent process.
-  // It is always -1 in the parent process.  The parent keeps its end of the
-  // pipe in read_fd_.
-  int write_fd_;
-};
-
-// Called in the parent process only. Reads the result code of the death
-// test child process via a pipe, interprets it to set the outcome_
-// member, and closes read_fd_.  Outputs diagnostics and terminates in
-// case of unexpected codes.
-void DeathTestImpl::ReadAndInterpretStatusByte() {
-  char flag;
-  int bytes_read;
-
-  // The read() here blocks until data is available (signifying the
-  // failure of the death test) or until the pipe is closed (signifying
-  // its success), so it's okay to call this in the parent before
-  // the child process has exited.
-  do {
-    bytes_read = posix::Read(read_fd(), &flag, 1);
-  } while (bytes_read == -1 && errno == EINTR);
-
-  if (bytes_read == 0) {
-    set_outcome(DIED);
-  } else if (bytes_read == 1) {
-    switch (flag) {
-      case kDeathTestReturned:
-        set_outcome(RETURNED);
-        break;
-      case kDeathTestThrew:
-        set_outcome(THREW);
-        break;
-      case kDeathTestLived:
-        set_outcome(LIVED);
-        break;
-      case kDeathTestInternalError:
-        FailFromInternalError(read_fd());  // Does not return.
-        break;
-      default:
-        GTEST_LOG_(FATAL) << "Death test child process reported "
-                          << "unexpected status byte ("
-                          << static_cast<unsigned int>(flag) << ")";
-    }
-  } else {
-    GTEST_LOG_(FATAL) << "Read from death test child process failed: "
-                      << GetLastErrnoDescription();
-  }
-  GTEST_DEATH_TEST_CHECK_SYSCALL_(posix::Close(read_fd()));
-  set_read_fd(-1);
-}
-
-// Signals that the death test code which should have exited, didn't.
-// Should be called only in a death test child process.
-// Writes a status byte to the child's status file descriptor, then
-// calls _exit(1).
-void DeathTestImpl::Abort(AbortReason reason) {
-  // The parent process considers the death test to be a failure if
-  // it finds any data in our pipe.  So, here we write a single flag byte
-  // to the pipe, then exit.
-  const char status_ch =
-      reason == TEST_DID_NOT_DIE ? kDeathTestLived :
-      reason == TEST_THREW_EXCEPTION ? kDeathTestThrew : kDeathTestReturned;
-
-  GTEST_DEATH_TEST_CHECK_SYSCALL_(posix::Write(write_fd(), &status_ch, 1));
-  // We are leaking the descriptor here because on some platforms (i.e.,
-  // when built as Windows DLL), destructors of global objects will still
-  // run after calling _exit(). On such systems, write_fd_ will be
-  // indirectly closed from the destructor of UnitTestImpl, causing double
-  // close if it is also closed here. On debug configurations, double close
-  // may assert. As there are no in-process buffers to flush here, we are
-  // relying on the OS to close the descriptor after the process terminates
-  // when the destructors are not run.
-  _exit(1);  // Exits w/o any normal exit hooks (we were supposed to crash)
-}
-
-// Returns an indented copy of stderr output for a death test.
-// This makes distinguishing death test output lines from regular log lines
-// much easier.
-static ::std::string FormatDeathTestOutput(const ::std::string& output) {
-  ::std::string ret;
-  for (size_t at = 0; ; ) {
-    const size_t line_end = output.find('\n', at);
-    ret += "[  DEATH   ] ";
-    if (line_end == ::std::string::npos) {
-      ret += output.substr(at);
-      break;
-    }
-    ret += output.substr(at, line_end + 1 - at);
-    at = line_end + 1;
-  }
-  return ret;
-}
-
-// Assesses the success or failure of a death test, using both private
-// members which have previously been set, and one argument:
-//
-// Private data members:
-//   outcome:  An enumeration describing how the death test
-//             concluded: DIED, LIVED, THREW, or RETURNED.  The death test
-//             fails in the latter three cases.
-//   status:   The exit status of the child process. On *nix, it is in the
-//             in the format specified by wait(2). On Windows, this is the
-//             value supplied to the ExitProcess() API or a numeric code
-//             of the exception that terminated the program.
-//   regex:    A regular expression object to be applied to
-//             the test's captured standard error output; the death test
-//             fails if it does not match.
-//
-// Argument:
-//   status_ok: true if exit_status is acceptable in the context of
-//              this particular death test, which fails if it is false
-//
-// Returns true iff all of the above conditions are met.  Otherwise, the
-// first failing condition, in the order given above, is the one that is
-// reported. Also sets the last death test message string.
-bool DeathTestImpl::Passed(bool status_ok) {
-  if (!spawned())
-    return false;
-
-  const String error_message = GetCapturedStderr();
-
-  bool success = false;
-  Message buffer;
-
-  buffer << "Death test: " << statement() << "\n";
-  switch (outcome()) {
-    case LIVED:
-      buffer << "    Result: failed to die.\n"
-             << " Error msg:\n" << FormatDeathTestOutput(error_message);
-      break;
-    case THREW:
-      buffer << "    Result: threw an exception.\n"
-             << " Error msg:\n" << FormatDeathTestOutput(error_message);
-      break;
-    case RETURNED:
-      buffer << "    Result: illegal return in test statement.\n"
-             << " Error msg:\n" << FormatDeathTestOutput(error_message);
-      break;
-    case DIED:
-      if (status_ok) {
-        const bool matched = RE::PartialMatch(error_message.c_str(), *regex());
-        if (matched) {
-          success = true;
-        } else {
-          buffer << "    Result: died but not with expected error.\n"
-                 << "  Expected: " << regex()->pattern() << "\n"
-                 << "Actual msg:\n" << FormatDeathTestOutput(error_message);
-        }
-      } else {
-        buffer << "    Result: died but not with expected exit code:\n"
-               << "            " << ExitSummary(status()) << "\n"
-               << "Actual msg:\n" << FormatDeathTestOutput(error_message);
-      }
-      break;
-    case IN_PROGRESS:
-    default:
-      GTEST_LOG_(FATAL)
-          << "DeathTest::Passed somehow called before conclusion of test";
-  }
-
-  DeathTest::set_last_death_test_message(buffer.GetString());
-  return success;
-}
-
-# if GTEST_OS_WINDOWS
-// WindowsDeathTest implements death tests on Windows. Due to the
-// specifics of starting new processes on Windows, death tests there are
-// always threadsafe, and Google Test considers the
-// --gtest_death_test_style=fast setting to be equivalent to
-// --gtest_death_test_style=threadsafe there.
-//
-// A few implementation notes:  Like the Linux version, the Windows
-// implementation uses pipes for child-to-parent communication. But due to
-// the specifics of pipes on Windows, some extra steps are required:
-//
-// 1. The parent creates a communication pipe and stores handles to both
-//    ends of it.
-// 2. The parent starts the child and provides it with the information
-//    necessary to acquire the handle to the write end of the pipe.
-// 3. The child acquires the write end of the pipe and signals the parent
-//    using a Windows event.
-// 4. Now the parent can release the write end of the pipe on its side. If
-//    this is done before step 3, the object's reference count goes down to
-//    0 and it is destroyed, preventing the child from acquiring it. The
-//    parent now has to release it, or read operations on the read end of
-//    the pipe will not return when the child terminates.
-// 5. The parent reads child's output through the pipe (outcome code and
-//    any possible error messages) from the pipe, and its stderr and then
-//    determines whether to fail the test.
-//
-// Note: to distinguish Win32 API calls from the local method and function
-// calls, the former are explicitly resolved in the global namespace.
-//
-class WindowsDeathTest : public DeathTestImpl {
- public:
-  WindowsDeathTest(const char* a_statement,
-                   const RE* a_regex,
-                   const char* file,
-                   int line)
-      : DeathTestImpl(a_statement, a_regex), file_(file), line_(line) {}
-
-  // All of these virtual functions are inherited from DeathTest.
-  virtual int Wait();
-  virtual TestRole AssumeRole();
-
- private:
-  // The name of the file in which the death test is located.
-  const char* const file_;
-  // The line number on which the death test is located.
-  const int line_;
-  // Handle to the write end of the pipe to the child process.
-  AutoHandle write_handle_;
-  // Child process handle.
-  AutoHandle child_handle_;
-  // Event the child process uses to signal the parent that it has
-  // acquired the handle to the write end of the pipe. After seeing this
-  // event the parent can release its own handles to make sure its
-  // ReadFile() calls return when the child terminates.
-  AutoHandle event_handle_;
-};
-
-// Waits for the child in a death test to exit, returning its exit
-// status, or 0 if no child process exists.  As a side effect, sets the
-// outcome data member.
-int WindowsDeathTest::Wait() {
-  if (!spawned())
-    return 0;
-
-  // Wait until the child either signals that it has acquired the write end
-  // of the pipe or it dies.
-  const HANDLE wait_handles[2] = { child_handle_.Get(), event_handle_.Get() };
-  switch (::WaitForMultipleObjects(2,
-                                   wait_handles,
-                                   FALSE,  // Waits for any of the handles.
-                                   INFINITE)) {
-    case WAIT_OBJECT_0:
-    case WAIT_OBJECT_0 + 1:
-      break;
-    default:
-      GTEST_DEATH_TEST_CHECK_(false);  // Should not get here.
-  }
-
-  // The child has acquired the write end of the pipe or exited.
-  // We release the handle on our side and continue.
-  write_handle_.Reset();
-  event_handle_.Reset();
-
-  ReadAndInterpretStatusByte();
-
-  // Waits for the child process to exit if it haven't already. This
-  // returns immediately if the child has already exited, regardless of
-  // whether previous calls to WaitForMultipleObjects synchronized on this
-  // handle or not.
-  GTEST_DEATH_TEST_CHECK_(
-      WAIT_OBJECT_0 == ::WaitForSingleObject(child_handle_.Get(),
-                                             INFINITE));
-  DWORD status_code;
-  GTEST_DEATH_TEST_CHECK_(
-      ::GetExitCodeProcess(child_handle_.Get(), &status_code) != FALSE);
-  child_handle_.Reset();
-  set_status(static_cast<int>(status_code));
-  return status();
-}
-
-// The AssumeRole process for a Windows death test.  It creates a child
-// process with the same executable as the current process to run the
-// death test.  The child process is given the --gtest_filter and
-// --gtest_internal_run_death_test flags such that it knows to run the
-// current death test only.
-DeathTest::TestRole WindowsDeathTest::AssumeRole() {
-  const UnitTestImpl* const impl = GetUnitTestImpl();
-  const InternalRunDeathTestFlag* const flag =
-      impl->internal_run_death_test_flag();
-  const TestInfo* const info = impl->current_test_info();
-  const int death_test_index = info->result()->death_test_count();
-
-  if (flag != NULL) {
-    // ParseInternalRunDeathTestFlag() has performed all the necessary
-    // processing.
-    set_write_fd(flag->write_fd());
-    return EXECUTE_TEST;
-  }
-
-  // WindowsDeathTest uses an anonymous pipe to communicate results of
-  // a death test.
-  SECURITY_ATTRIBUTES handles_are_inheritable = {
-    sizeof(SECURITY_ATTRIBUTES), NULL, TRUE };
-  HANDLE read_handle, write_handle;
-  GTEST_DEATH_TEST_CHECK_(
-      ::CreatePipe(&read_handle, &write_handle, &handles_are_inheritable,
-                   0)  // Default buffer size.
-      != FALSE);
-  set_read_fd(::_open_osfhandle(reinterpret_cast<intptr_t>(read_handle),
-                                O_RDONLY));
-  write_handle_.Reset(write_handle);
-  event_handle_.Reset(::CreateEvent(
-      &handles_are_inheritable,
-      TRUE,    // The event will automatically reset to non-signaled state.
-      FALSE,   // The initial state is non-signalled.
-      NULL));  // The even is unnamed.
-  GTEST_DEATH_TEST_CHECK_(event_handle_.Get() != NULL);
-  const String filter_flag = String::Format("--%s%s=%s.%s",
-                                            GTEST_FLAG_PREFIX_, kFilterFlag,
-                                            info->test_case_name(),
-                                            info->name());
-  const String internal_flag = String::Format(
-    "--%s%s=%s|%d|%d|%u|%Iu|%Iu",
-      GTEST_FLAG_PREFIX_,
-      kInternalRunDeathTestFlag,
-      file_, line_,
-      death_test_index,
-      static_cast<unsigned int>(::GetCurrentProcessId()),
-      // size_t has the same with as pointers on both 32-bit and 64-bit
-      // Windows platforms.
-      // See http://msdn.microsoft.com/en-us/library/tcxf1dw6.aspx.
-      reinterpret_cast<size_t>(write_handle),
-      reinterpret_cast<size_t>(event_handle_.Get()));
-
-  char executable_path[_MAX_PATH + 1];  // NOLINT
-  GTEST_DEATH_TEST_CHECK_(
-      _MAX_PATH + 1 != ::GetModuleFileNameA(NULL,
-                                            executable_path,
-                                            _MAX_PATH));
-
-  String command_line = String::Format("%s %s \"%s\"",
-                                       ::GetCommandLineA(),
-                                       filter_flag.c_str(),
-                                       internal_flag.c_str());
-
-  DeathTest::set_last_death_test_message("");
-
-  CaptureStderr();
-  // Flush the log buffers since the log streams are shared with the child.
-  FlushInfoLog();
-
-  // The child process will share the standard handles with the parent.
-  STARTUPINFOA startup_info;
-  memset(&startup_info, 0, sizeof(STARTUPINFO));
-  startup_info.dwFlags = STARTF_USESTDHANDLES;
-  startup_info.hStdInput = ::GetStdHandle(STD_INPUT_HANDLE);
-  startup_info.hStdOutput = ::GetStdHandle(STD_OUTPUT_HANDLE);
-  startup_info.hStdError = ::GetStdHandle(STD_ERROR_HANDLE);
-
-  PROCESS_INFORMATION process_info;
-  GTEST_DEATH_TEST_CHECK_(::CreateProcessA(
-      executable_path,
-      const_cast<char*>(command_line.c_str()),
-      NULL,   // Retuned process handle is not inheritable.
-      NULL,   // Retuned thread handle is not inheritable.
-      TRUE,   // Child inherits all inheritable handles (for write_handle_).
-      0x0,    // Default creation flags.
-      NULL,   // Inherit the parent's environment.
-      UnitTest::GetInstance()->original_working_dir(),
-      &startup_info,
-      &process_info) != FALSE);
-  child_handle_.Reset(process_info.hProcess);
-  ::CloseHandle(process_info.hThread);
-  set_spawned(true);
-  return OVERSEE_TEST;
-}
-# else  // We are not on Windows.
-
-// ForkingDeathTest provides implementations for most of the abstract
-// methods of the DeathTest interface.  Only the AssumeRole method is
-// left undefined.
-class ForkingDeathTest : public DeathTestImpl {
- public:
-  ForkingDeathTest(const char* statement, const RE* regex);
-
-  // All of these virtual functions are inherited from DeathTest.
-  virtual int Wait();
-
- protected:
-  void set_child_pid(pid_t child_pid) { child_pid_ = child_pid; }
-
- private:
-  // PID of child process during death test; 0 in the child process itself.
-  pid_t child_pid_;
-};
-
-// Constructs a ForkingDeathTest.
-ForkingDeathTest::ForkingDeathTest(const char* a_statement, const RE* a_regex)
-    : DeathTestImpl(a_statement, a_regex),
-      child_pid_(-1) {}
-
-// Waits for the child in a death test to exit, returning its exit
-// status, or 0 if no child process exists.  As a side effect, sets the
-// outcome data member.
-int ForkingDeathTest::Wait() {
-  if (!spawned())
-    return 0;
-
-  ReadAndInterpretStatusByte();
-
-  int status_value;
-  GTEST_DEATH_TEST_CHECK_SYSCALL_(waitpid(child_pid_, &status_value, 0));
-  set_status(status_value);
-  return status_value;
-}
-
-// A concrete death test class that forks, then immediately runs the test
-// in the child process.
-class NoExecDeathTest : public ForkingDeathTest {
- public:
-  NoExecDeathTest(const char* a_statement, const RE* a_regex) :
-      ForkingDeathTest(a_statement, a_regex) { }
-  virtual TestRole AssumeRole();
-};
-
-// The AssumeRole process for a fork-and-run death test.  It implements a
-// straightforward fork, with a simple pipe to transmit the status byte.
-DeathTest::TestRole NoExecDeathTest::AssumeRole() {
-  const size_t thread_count = GetThreadCount();
-  if (thread_count != 1) {
-    GTEST_LOG_(WARNING) << DeathTestThreadWarning(thread_count);
-  }
-
-  int pipe_fd[2];
-  GTEST_DEATH_TEST_CHECK_(pipe(pipe_fd) != -1);
-
-  DeathTest::set_last_death_test_message("");
-  CaptureStderr();
-  // When we fork the process below, the log file buffers are copied, but the
-  // file descriptors are shared.  We flush all log files here so that closing
-  // the file descriptors in the child process doesn't throw off the
-  // synchronization between descriptors and buffers in the parent process.
-  // This is as close to the fork as possible to avoid a race condition in case
-  // there are multiple threads running before the death test, and another
-  // thread writes to the log file.
-  FlushInfoLog();
-
-  const pid_t child_pid = fork();
-  GTEST_DEATH_TEST_CHECK_(child_pid != -1);
-  set_child_pid(child_pid);
-  if (child_pid == 0) {
-    GTEST_DEATH_TEST_CHECK_SYSCALL_(close(pipe_fd[0]));
-    set_write_fd(pipe_fd[1]);
-    // Redirects all logging to stderr in the child process to prevent
-    // concurrent writes to the log files.  We capture stderr in the parent
-    // process and append the child process' output to a log.
-    LogToStderr();
-    // Event forwarding to the listeners of event listener API mush be shut
-    // down in death test subprocesses.
-    GetUnitTestImpl()->listeners()->SuppressEventForwarding();
-    return EXECUTE_TEST;
-  } else {
-    GTEST_DEATH_TEST_CHECK_SYSCALL_(close(pipe_fd[1]));
-    set_read_fd(pipe_fd[0]);
-    set_spawned(true);
-    return OVERSEE_TEST;
-  }
-}
-
-// A concrete death test class that forks and re-executes the main
-// program from the beginning, with command-line flags set that cause
-// only this specific death test to be run.
-class ExecDeathTest : public ForkingDeathTest {
- public:
-  ExecDeathTest(const char* a_statement, const RE* a_regex,
-                const char* file, int line) :
-      ForkingDeathTest(a_statement, a_regex), file_(file), line_(line) { }
-  virtual TestRole AssumeRole();
- private:
-  // The name of the file in which the death test is located.
-  const char* const file_;
-  // The line number on which the death test is located.
-  const int line_;
-};
-
-// Utility class for accumulating command-line arguments.
-class Arguments {
- public:
-  Arguments() {
-    args_.push_back(NULL);
-  }
-
-  ~Arguments() {
-    for (std::vector<char*>::iterator i = args_.begin(); i != args_.end();
-         ++i) {
-      free(*i);
-    }
-  }
-  void AddArgument(const char* argument) {
-    args_.insert(args_.end() - 1, posix::StrDup(argument));
-  }
-
-  template <typename Str>
-  void AddArguments(const ::std::vector<Str>& arguments) {
-    for (typename ::std::vector<Str>::const_iterator i = arguments.begin();
-         i != arguments.end();
-         ++i) {
-      args_.insert(args_.end() - 1, posix::StrDup(i->c_str()));
-    }
-  }
-  char* const* Argv() {
-    return &args_[0];
-  }
- private:
-  std::vector<char*> args_;
-};
-
-// A struct that encompasses the arguments to the child process of a
-// threadsafe-style death test process.
-struct ExecDeathTestArgs {
-  char* const* argv;  // Command-line arguments for the child's call to exec
-  int close_fd;       // File descriptor to close; the read end of a pipe
-};
-
-#  if GTEST_OS_MAC
-inline char** GetEnviron() {
-  // When Google Test is built as a framework on MacOS X, the environ variable
-  // is unavailable. Apple's documentation (man environ) recommends using
-  // _NSGetEnviron() instead.
-  return *_NSGetEnviron();
-}
-#  else
-// Some POSIX platforms expect you to declare environ. extern "C" makes
-// it reside in the global namespace.
-extern "C" char** environ;
-inline char** GetEnviron() { return environ; }
-#  endif  // GTEST_OS_MAC
-
-// The main function for a threadsafe-style death test child process.
-// This function is called in a clone()-ed process and thus must avoid
-// any potentially unsafe operations like malloc or libc functions.
-static int ExecDeathTestChildMain(void* child_arg) {
-  ExecDeathTestArgs* const args = static_cast<ExecDeathTestArgs*>(child_arg);
-  GTEST_DEATH_TEST_CHECK_SYSCALL_(close(args->close_fd));
-
-  // We need to execute the test program in the same environment where
-  // it was originally invoked.  Therefore we change to the original
-  // working directory first.
-  const char* const original_dir =
-      UnitTest::GetInstance()->original_working_dir();
-  // We can safely call chdir() as it's a direct system call.
-  if (chdir(original_dir) != 0) {
-    DeathTestAbort(String::Format("chdir(\"%s\") failed: %s",
-                                  original_dir,
-                                  GetLastErrnoDescription().c_str()));
-    return EXIT_FAILURE;
-  }
-
-  // We can safely call execve() as it's a direct system call.  We
-  // cannot use execvp() as it's a libc function and thus potentially
-  // unsafe.  Since execve() doesn't search the PATH, the user must
-  // invoke the test program via a valid path that contains at least
-  // one path separator.
-  execve(args->argv[0], args->argv, GetEnviron());
-  DeathTestAbort(String::Format("execve(%s, ...) in %s failed: %s",
-                                args->argv[0],
-                                original_dir,
-                                GetLastErrnoDescription().c_str()));
-  return EXIT_FAILURE;
-}
-
-// Two utility routines that together determine the direction the stack
-// grows.
-// This could be accomplished more elegantly by a single recursive
-// function, but we want to guard against the unlikely possibility of
-// a smart compiler optimizing the recursion away.
-//
-// GTEST_NO_INLINE_ is required to prevent GCC 4.6 from inlining
-// StackLowerThanAddress into StackGrowsDown, which then doesn't give
-// correct answer.
-bool StackLowerThanAddress(const void* ptr) GTEST_NO_INLINE_;
-bool StackLowerThanAddress(const void* ptr) {
-  int dummy;
-  return &dummy < ptr;
-}
-
-bool StackGrowsDown() {
-  int dummy;
-  return StackLowerThanAddress(&dummy);
-}
-
-// A threadsafe implementation of fork(2) for threadsafe-style death tests
-// that uses clone(2).  It dies with an error message if anything goes
-// wrong.
-static pid_t ExecDeathTestFork(char* const* argv, int close_fd) {
-  ExecDeathTestArgs args = { argv, close_fd };
-  pid_t child_pid = -1;
-
-#  if GTEST_HAS_CLONE
-  const bool use_fork = GTEST_FLAG(death_test_use_fork);
-
-  if (!use_fork) {
-    static const bool stack_grows_down = StackGrowsDown();
-    const size_t stack_size = getpagesize();
-    // MMAP_ANONYMOUS is not defined on Mac, so we use MAP_ANON instead.
-    void* const stack = mmap(NULL, stack_size, PROT_READ | PROT_WRITE,
-                             MAP_ANON | MAP_PRIVATE, -1, 0);
-    GTEST_DEATH_TEST_CHECK_(stack != MAP_FAILED);
-    void* const stack_top =
-        static_cast<char*>(stack) + (stack_grows_down ? stack_size : 0);
-
-    child_pid = clone(&ExecDeathTestChildMain, stack_top, SIGCHLD, &args);
-
-    GTEST_DEATH_TEST_CHECK_(munmap(stack, stack_size) != -1);
-  }
-#  else
-  const bool use_fork = true;
-#  endif  // GTEST_HAS_CLONE
-
-  if (use_fork && (child_pid = fork()) == 0) {
-      ExecDeathTestChildMain(&args);
-      _exit(0);
-  }
-
-  GTEST_DEATH_TEST_CHECK_(child_pid != -1);
-  return child_pid;
-}
-
-// The AssumeRole process for a fork-and-exec death test.  It re-executes the
-// main program from the beginning, setting the --gtest_filter
-// and --gtest_internal_run_death_test flags to cause only the current
-// death test to be re-run.
-DeathTest::TestRole ExecDeathTest::AssumeRole() {
-  const UnitTestImpl* const impl = GetUnitTestImpl();
-  const InternalRunDeathTestFlag* const flag =
-      impl->internal_run_death_test_flag();
-  const TestInfo* const info = impl->current_test_info();
-  const int death_test_index = info->result()->death_test_count();
-
-  if (flag != NULL) {
-    set_write_fd(flag->write_fd());
-    return EXECUTE_TEST;
-  }
-
-  int pipe_fd[2];
-  GTEST_DEATH_TEST_CHECK_(pipe(pipe_fd) != -1);
-  // Clear the close-on-exec flag on the write end of the pipe, lest
-  // it be closed when the child process does an exec:
-  GTEST_DEATH_TEST_CHECK_(fcntl(pipe_fd[1], F_SETFD, 0) != -1);
-
-  const String filter_flag =
-      String::Format("--%s%s=%s.%s",
-                     GTEST_FLAG_PREFIX_, kFilterFlag,
-                     info->test_case_name(), info->name());
-  const String internal_flag =
-      String::Format("--%s%s=%s|%d|%d|%d",
-                     GTEST_FLAG_PREFIX_, kInternalRunDeathTestFlag,
-                     file_, line_, death_test_index, pipe_fd[1]);
-  Arguments args;
-  args.AddArguments(GetArgvs());
-  args.AddArgument(filter_flag.c_str());
-  args.AddArgument(internal_flag.c_str());
-
-  DeathTest::set_last_death_test_message("");
-
-  CaptureStderr();
-  // See the comment in NoExecDeathTest::AssumeRole for why the next line
-  // is necessary.
-  FlushInfoLog();
-
-  const pid_t child_pid = ExecDeathTestFork(args.Argv(), pipe_fd[0]);
-  GTEST_DEATH_TEST_CHECK_SYSCALL_(close(pipe_fd[1]));
-  set_child_pid(child_pid);
-  set_read_fd(pipe_fd[0]);
-  set_spawned(true);
-  return OVERSEE_TEST;
-}
-
-# endif  // !GTEST_OS_WINDOWS
-
-// Creates a concrete DeathTest-derived class that depends on the
-// --gtest_death_test_style flag, and sets the pointer pointed to
-// by the "test" argument to its address.  If the test should be
-// skipped, sets that pointer to NULL.  Returns true, unless the
-// flag is set to an invalid value.
-bool DefaultDeathTestFactory::Create(const char* statement, const RE* regex,
-                                     const char* file, int line,
-                                     DeathTest** test) {
-  UnitTestImpl* const impl = GetUnitTestImpl();
-  const InternalRunDeathTestFlag* const flag =
-      impl->internal_run_death_test_flag();
-  const int death_test_index = impl->current_test_info()
-      ->increment_death_test_count();
-
-  if (flag != NULL) {
-    if (death_test_index > flag->index()) {
-      DeathTest::set_last_death_test_message(String::Format(
-          "Death test count (%d) somehow exceeded expected maximum (%d)",
-          death_test_index, flag->index()));
-      return false;
-    }
-
-    if (!(flag->file() == file && flag->line() == line &&
-          flag->index() == death_test_index)) {
-      *test = NULL;
-      return true;
-    }
-  }
-
-# if GTEST_OS_WINDOWS
-
-  if (GTEST_FLAG(death_test_style) == "threadsafe" ||
-      GTEST_FLAG(death_test_style) == "fast") {
-    *test = new WindowsDeathTest(statement, regex, file, line);
-  }
-
-# else
-
-  if (GTEST_FLAG(death_test_style) == "threadsafe") {
-    *test = new ExecDeathTest(statement, regex, file, line);
-  } else if (GTEST_FLAG(death_test_style) == "fast") {
-    *test = new NoExecDeathTest(statement, regex);
-  }
-
-# endif  // GTEST_OS_WINDOWS
-
-  else {  // NOLINT - this is more readable than unbalanced brackets inside #if.
-    DeathTest::set_last_death_test_message(String::Format(
-        "Unknown death test style \"%s\" encountered",
-        GTEST_FLAG(death_test_style).c_str()));
-    return false;
-  }
-
-  return true;
-}
-
-// Splits a given string on a given delimiter, populating a given
-// vector with the fields.  GTEST_HAS_DEATH_TEST implies that we have
-// ::std::string, so we can use it here.
-static void SplitString(const ::std::string& str, char delimiter,
-                        ::std::vector< ::std::string>* dest) {
-  ::std::vector< ::std::string> parsed;
-  ::std::string::size_type pos = 0;
-  while (::testing::internal::AlwaysTrue()) {
-    const ::std::string::size_type colon = str.find(delimiter, pos);
-    if (colon == ::std::string::npos) {
-      parsed.push_back(str.substr(pos));
-      break;
-    } else {
-      parsed.push_back(str.substr(pos, colon - pos));
-      pos = colon + 1;
-    }
-  }
-  dest->swap(parsed);
-}
-
-# if GTEST_OS_WINDOWS
-// Recreates the pipe and event handles from the provided parameters,
-// signals the event, and returns a file descriptor wrapped around the pipe
-// handle. This function is called in the child process only.
-int GetStatusFileDescriptor(unsigned int parent_process_id,
-                            size_t write_handle_as_size_t,
-                            size_t event_handle_as_size_t) {
-  AutoHandle parent_process_handle(::OpenProcess(PROCESS_DUP_HANDLE,
-                                                   FALSE,  // Non-inheritable.
-                                                   parent_process_id));
-  if (parent_process_handle.Get() == INVALID_HANDLE_VALUE) {
-    DeathTestAbort(String::Format("Unable to open parent process %u",
-                                  parent_process_id));
-  }
-
-  // TODO(vladl@google.com): Replace the following check with a
-  // compile-time assertion when available.
-  GTEST_CHECK_(sizeof(HANDLE) <= sizeof(size_t));
-
-  const HANDLE write_handle =
-      reinterpret_cast<HANDLE>(write_handle_as_size_t);
-  HANDLE dup_write_handle;
-
-  // The newly initialized handle is accessible only in in the parent
-  // process. To obtain one accessible within the child, we need to use
-  // DuplicateHandle.
-  if (!::DuplicateHandle(parent_process_handle.Get(), write_handle,
-                         ::GetCurrentProcess(), &dup_write_handle,
-                         0x0,    // Requested privileges ignored since
-                                 // DUPLICATE_SAME_ACCESS is used.
-                         FALSE,  // Request non-inheritable handler.
-                         DUPLICATE_SAME_ACCESS)) {
-    DeathTestAbort(String::Format(
-        "Unable to duplicate the pipe handle %Iu from the parent process %u",
-        write_handle_as_size_t, parent_process_id));
-  }
-
-  const HANDLE event_handle = reinterpret_cast<HANDLE>(event_handle_as_size_t);
-  HANDLE dup_event_handle;
-
-  if (!::DuplicateHandle(parent_process_handle.Get(), event_handle,
-                         ::GetCurrentProcess(), &dup_event_handle,
-                         0x0,
-                         FALSE,
-                         DUPLICATE_SAME_ACCESS)) {
-    DeathTestAbort(String::Format(
-        "Unable to duplicate the event handle %Iu from the parent process %u",
-        event_handle_as_size_t, parent_process_id));
-  }
-
-  const int write_fd =
-      ::_open_osfhandle(reinterpret_cast<intptr_t>(dup_write_handle), O_APPEND);
-  if (write_fd == -1) {
-    DeathTestAbort(String::Format(
-        "Unable to convert pipe handle %Iu to a file descriptor",
-        write_handle_as_size_t));
-  }
-
-  // Signals the parent that the write end of the pipe has been acquired
-  // so the parent can release its own write end.
-  ::SetEvent(dup_event_handle);
-
-  return write_fd;
-}
-# endif  // GTEST_OS_WINDOWS
-
-// Returns a newly created InternalRunDeathTestFlag object with fields
-// initialized from the GTEST_FLAG(internal_run_death_test) flag if
-// the flag is specified; otherwise returns NULL.
-InternalRunDeathTestFlag* ParseInternalRunDeathTestFlag() {
-  if (GTEST_FLAG(internal_run_death_test) == "") return NULL;
-
-  // GTEST_HAS_DEATH_TEST implies that we have ::std::string, so we
-  // can use it here.
-  int line = -1;
-  int index = -1;
-  ::std::vector< ::std::string> fields;
-  SplitString(GTEST_FLAG(internal_run_death_test).c_str(), '|', &fields);
-  int write_fd = -1;
-
-# if GTEST_OS_WINDOWS
-
-  unsigned int parent_process_id = 0;
-  size_t write_handle_as_size_t = 0;
-  size_t event_handle_as_size_t = 0;
-
-  if (fields.size() != 6
-      || !ParseNaturalNumber(fields[1], &line)
-      || !ParseNaturalNumber(fields[2], &index)
-      || !ParseNaturalNumber(fields[3], &parent_process_id)
-      || !ParseNaturalNumber(fields[4], &write_handle_as_size_t)
-      || !ParseNaturalNumber(fields[5], &event_handle_as_size_t)) {
-    DeathTestAbort(String::Format(
-        "Bad --gtest_internal_run_death_test flag: %s",
-        GTEST_FLAG(internal_run_death_test).c_str()));
-  }
-  write_fd = GetStatusFileDescriptor(parent_process_id,
-                                     write_handle_as_size_t,
-                                     event_handle_as_size_t);
-# else
-
-  if (fields.size() != 4
-      || !ParseNaturalNumber(fields[1], &line)
-      || !ParseNaturalNumber(fields[2], &index)
-      || !ParseNaturalNumber(fields[3], &write_fd)) {
-    DeathTestAbort(String::Format(
-        "Bad --gtest_internal_run_death_test flag: %s",
-        GTEST_FLAG(internal_run_death_test).c_str()));
-  }
-
-# endif  // GTEST_OS_WINDOWS
-
-  return new InternalRunDeathTestFlag(fields[0], line, index, write_fd);
-}
-
-}  // namespace internal
-
-#endif  // GTEST_HAS_DEATH_TEST
-
-}  // namespace testing