couchbase 3.0.0.alpha.5-x86_64-linux → 3.5.1-x86_64-linux

data/ext/third_party/snappy/snappy-test.h

@@ -1,526 +0,0 @@
-// Copyright 2011 Google Inc. All Rights Reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-// Various stubs for the unit tests for the open-source version of Snappy.
-
-#ifndef THIRD_PARTY_SNAPPY_OPENSOURCE_SNAPPY_TEST_H_
-#define THIRD_PARTY_SNAPPY_OPENSOURCE_SNAPPY_TEST_H_
-
-#include <cstdarg>
-#include <cstdio>
-#include <iostream>
-#include <string>
-
-#include "snappy-stubs-internal.h"
-
-#ifdef HAVE_SYS_MMAN_H
-#include <sys/mman.h>
-#endif
-
-#ifdef HAVE_SYS_RESOURCE_H
-#include <sys/resource.h>
-#endif
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_WINDOWS_H
-#include <windows.h>
-#endif
-
-#ifdef HAVE_GTEST
-
-#include <gtest/gtest.h>
-#undef TYPED_TEST
-#define TYPED_TEST TEST
-#define INIT_GTEST(argc, argv) ::testing::InitGoogleTest(argc, *argv)
-
-#else
-
-// Stubs for if the user doesn't have Google Test installed.
-
-#define TEST(test_case, test_subcase) \
-  void Test_ ## test_case ## _ ## test_subcase()
-#define INIT_GTEST(argc, argv)
-
-#define TYPED_TEST TEST
-#define EXPECT_EQ CHECK_EQ
-#define EXPECT_NE CHECK_NE
-#define EXPECT_FALSE(cond) CHECK(!(cond))
-
-#endif
-
-#ifdef HAVE_GFLAGS
-
-#include <gflags/gflags.h>
-
-// This is tricky; both gflags and Google Test want to look at the command line
-// arguments. Google Test seems to be the most happy with unknown arguments,
-// though, so we call it first and hope for the best.
-#define InitGoogle(argv0, argc, argv, remove_flags) \
-  INIT_GTEST(argc, argv); \
-  google::ParseCommandLineFlags(argc, argv, remove_flags);
-
-#else
-
-// If we don't have the gflags package installed, these can only be
-// changed at compile time.
-#define DEFINE_int32(flag_name, default_value, description) \
-  static int FLAGS_ ## flag_name = default_value;
-
-#define InitGoogle(argv0, argc, argv, remove_flags) \
-  INIT_GTEST(argc, argv)
-
-#endif
-
-#ifdef HAVE_LIBZ
-#include "zlib.h"
-#endif
-
-#ifdef HAVE_LIBLZO2
-#include "lzo/lzo1x.h"
-#endif
-
-namespace {
-
-namespace file {
-  int Defaults() { return 0; }
-
-  class DummyStatus {
-   public:
-    void CheckSuccess() { }
-  };
-
-  DummyStatus GetContents(
-      const std::string& filename, std::string* data, int /*unused*/) {
-    FILE* fp = std::fopen(filename.c_str(), "rb");
-    if (fp == NULL) {
-      std::perror(filename.c_str());
-      std::exit(1);
-    }
-
-    data->clear();
-    while (!feof(fp)) {
-      char buf[4096];
-      size_t ret = fread(buf, 1, 4096, fp);
-      if (ret == 0 && ferror(fp)) {
-        std::perror("fread");
-        std::exit(1);
-      }
-      data->append(std::string(buf, ret));
-    }
-
-    std::fclose(fp);
-
-    return DummyStatus();
-  }
-
-  inline DummyStatus SetContents(
-      const std::string& filename, const std::string& str, int /*unused*/) {
-    FILE* fp = std::fopen(filename.c_str(), "wb");
-    if (fp == NULL) {
-      std::perror(filename.c_str());
-      std::exit(1);
-    }
-
-    int ret = std::fwrite(str.data(), str.size(), 1, fp);
-    if (ret != 1) {
-      std::perror("fwrite");
-      std::exit(1);
-    }
-
-    std::fclose(fp);
-
-    return DummyStatus();
-  }
-}  // namespace file
-
-}  // namespace
-
-namespace snappy {
-
-#define FLAGS_test_random_seed 301
-using TypeParam = std::string;
-
-void Test_CorruptedTest_VerifyCorrupted();
-void Test_Snappy_SimpleTests();
-void Test_Snappy_MaxBlowup();
-void Test_Snappy_RandomData();
-void Test_Snappy_FourByteOffset();
-void Test_SnappyCorruption_TruncatedVarint();
-void Test_SnappyCorruption_UnterminatedVarint();
-void Test_SnappyCorruption_OverflowingVarint();
-void Test_Snappy_ReadPastEndOfBuffer();
-void Test_Snappy_FindMatchLength();
-void Test_Snappy_FindMatchLengthRandom();
-
-std::string ReadTestDataFile(const std::string& base, size_t size_limit);
-
-std::string ReadTestDataFile(const std::string& base);
-
-// A std::sprintf() variant that returns a std::string.
-// Not safe for general use due to truncation issues.
-std::string StrFormat(const char* format, ...);
-
-// A wall-time clock. This stub is not super-accurate, nor resistant to the
-// system time changing.
-class CycleTimer {
- public:
-  CycleTimer() : real_time_us_(0) {}
-
-  void Start() {
-#ifdef WIN32
-    QueryPerformanceCounter(&start_);
-#else
-    gettimeofday(&start_, NULL);
-#endif
-  }
-
-  void Stop() {
-#ifdef WIN32
-    LARGE_INTEGER stop;
-    LARGE_INTEGER frequency;
-    QueryPerformanceCounter(&stop);
-    QueryPerformanceFrequency(&frequency);
-
-    double elapsed = static_cast<double>(stop.QuadPart - start_.QuadPart) /
-        frequency.QuadPart;
-    real_time_us_ += elapsed * 1e6 + 0.5;
-#else
-    struct timeval stop;
-    gettimeofday(&stop, NULL);
-
-    real_time_us_ += 1000000 * (stop.tv_sec - start_.tv_sec);
-    real_time_us_ += (stop.tv_usec - start_.tv_usec);
-#endif
-  }
-
-  double Get() {
-    return real_time_us_ * 1e-6;
-  }
-
- private:
-  int64_t real_time_us_;
-#ifdef WIN32
-  LARGE_INTEGER start_;
-#else
-  struct timeval start_;
-#endif
-};
-
-// Minimalistic microbenchmark framework.
-
-typedef void (*BenchmarkFunction)(int, int);
-
-class Benchmark {
- public:
-  Benchmark(const std::string& name, BenchmarkFunction function)
-      : name_(name), function_(function) {}
-
-  Benchmark* DenseRange(int start, int stop) {
-    start_ = start;
-    stop_ = stop;
-    return this;
-  }
-
-  void Run();
-
- private:
-  const std::string name_;
-  const BenchmarkFunction function_;
-  int start_, stop_;
-};
-#define BENCHMARK(benchmark_name) \
-  Benchmark* Benchmark_ ## benchmark_name = \
-          (new Benchmark(#benchmark_name, benchmark_name))
-
-extern Benchmark* Benchmark_BM_UFlat;
-extern Benchmark* Benchmark_BM_UIOVec;
-extern Benchmark* Benchmark_BM_UValidate;
-extern Benchmark* Benchmark_BM_ZFlat;
-extern Benchmark* Benchmark_BM_ZFlatAll;
-extern Benchmark* Benchmark_BM_ZFlatIncreasingTableSize;
-
-void ResetBenchmarkTiming();
-void StartBenchmarkTiming();
-void StopBenchmarkTiming();
-void SetBenchmarkLabel(const std::string& str);
-void SetBenchmarkBytesProcessed(int64_t bytes);
-
-#ifdef HAVE_LIBZ
-
-// Object-oriented wrapper around zlib.
-class ZLib {
- public:
-  ZLib();
-  ~ZLib();
-
-  // Wipe a ZLib object to a virgin state.  This differs from Reset()
-  // in that it also breaks any state.
-  void Reinit();
-
-  // Call this to make a zlib buffer as good as new.  Here's the only
-  // case where they differ:
-  //    CompressChunk(a); CompressChunk(b); CompressChunkDone();   vs
-  //    CompressChunk(a); Reset(); CompressChunk(b); CompressChunkDone();
-  // You'll want to use Reset(), then, when you interrupt a compress
-  // (or uncompress) in the middle of a chunk and want to start over.
-  void Reset();
-
-  // According to the zlib manual, when you Compress, the destination
-  // buffer must have size at least src + .1%*src + 12.  This function
-  // helps you calculate that.  Augment this to account for a potential
-  // gzip header and footer, plus a few bytes of slack.
-  static int MinCompressbufSize(int uncompress_size) {
-    return uncompress_size + uncompress_size/1000 + 40;
-  }
-
-  // Compresses the source buffer into the destination buffer.
-  // sourceLen is the byte length of the source buffer.
-  // Upon entry, destLen is the total size of the destination buffer,
-  // which must be of size at least MinCompressbufSize(sourceLen).
-  // Upon exit, destLen is the actual size of the compressed buffer.
-  //
-  // This function can be used to compress a whole file at once if the
-  // input file is mmap'ed.
-  //
-  // Returns Z_OK if success, Z_MEM_ERROR if there was not
-  // enough memory, Z_BUF_ERROR if there was not enough room in the
-  // output buffer. Note that if the output buffer is exactly the same
-  // size as the compressed result, we still return Z_BUF_ERROR.
-  // (check CL#1936076)
-  int Compress(Bytef *dest, uLongf *destLen,
-               const Bytef *source, uLong sourceLen);
-
-  // Uncompresses the source buffer into the destination buffer.
-  // The destination buffer must be long enough to hold the entire
-  // decompressed contents.
-  //
-  // Returns Z_OK on success, otherwise, it returns a zlib error code.
-  int Uncompress(Bytef *dest, uLongf *destLen,
-                 const Bytef *source, uLong sourceLen);
-
-  // Uncompress data one chunk at a time -- ie you can call this
-  // more than once.  To get this to work you need to call per-chunk
-  // and "done" routines.
-  //
-  // Returns Z_OK if success, Z_MEM_ERROR if there was not
-  // enough memory, Z_BUF_ERROR if there was not enough room in the
-  // output buffer.
-
-  int UncompressAtMost(Bytef *dest, uLongf *destLen,
-                       const Bytef *source, uLong *sourceLen);
-
-  // Checks gzip footer information, as needed.  Mostly this just
-  // makes sure the checksums match.  Whenever you call this, it
-  // will assume the last 8 bytes from the previous UncompressChunk
-  // call are the footer.  Returns true iff everything looks ok.
-  bool UncompressChunkDone();
-
- private:
-  int InflateInit();       // sets up the zlib inflate structure
-  int DeflateInit();       // sets up the zlib deflate structure
-
-  // These init the zlib data structures for compressing/uncompressing
-  int CompressInit(Bytef *dest, uLongf *destLen,
-                   const Bytef *source, uLong *sourceLen);
-  int UncompressInit(Bytef *dest, uLongf *destLen,
-                     const Bytef *source, uLong *sourceLen);
-  // Initialization method to be called if we hit an error while
-  // uncompressing. On hitting an error, call this method before
-  // returning the error.
-  void UncompressErrorInit();
-
-  // Helper function for Compress
-  int CompressChunkOrAll(Bytef *dest, uLongf *destLen,
-                         const Bytef *source, uLong sourceLen,
-                         int flush_mode);
-  int CompressAtMostOrAll(Bytef *dest, uLongf *destLen,
-                          const Bytef *source, uLong *sourceLen,
-                          int flush_mode);
-
-  // Likewise for UncompressAndUncompressChunk
-  int UncompressChunkOrAll(Bytef *dest, uLongf *destLen,
-                           const Bytef *source, uLong sourceLen,
-                           int flush_mode);
-
-  int UncompressAtMostOrAll(Bytef *dest, uLongf *destLen,
-                            const Bytef *source, uLong *sourceLen,
-                            int flush_mode);
-
-  // Initialization method to be called if we hit an error while
-  // compressing. On hitting an error, call this method before
-  // returning the error.
-  void CompressErrorInit();
-
-  int compression_level_;   // compression level
-  int window_bits_;         // log base 2 of the window size used in compression
-  int mem_level_;           // specifies the amount of memory to be used by
-                            // compressor (1-9)
-  z_stream comp_stream_;    // Zlib stream data structure
-  bool comp_init_;          // True if we have initialized comp_stream_
-  z_stream uncomp_stream_;  // Zlib stream data structure
-  bool uncomp_init_;        // True if we have initialized uncomp_stream_
-
-  // These are used only with chunked compression.
-  bool first_chunk_;       // true if we need to emit headers with this chunk
-};
-
-#endif  // HAVE_LIBZ
-
-}  // namespace snappy
-
-DECLARE_bool(run_microbenchmarks);
-
-static inline void RunSpecifiedBenchmarks() {
-  if (!FLAGS_run_microbenchmarks) {
-    return;
-  }
-
-  std::fprintf(stderr, "Running microbenchmarks.\n");
-#ifndef NDEBUG
-  std::fprintf(stderr,
-               "WARNING: Compiled with assertions enabled, will be slow.\n");
-#endif
-#ifndef __OPTIMIZE__
-  std::fprintf(stderr,
-               "WARNING: Compiled without optimization, will be slow.\n");
-#endif
-  std::fprintf(stderr, "Benchmark            Time(ns)    CPU(ns) Iterations\n");
-  std::fprintf(stderr, "---------------------------------------------------\n");
-
-  snappy::Benchmark_BM_UFlat->Run();
-  snappy::Benchmark_BM_UIOVec->Run();
-  snappy::Benchmark_BM_UValidate->Run();
-  snappy::Benchmark_BM_ZFlat->Run();
-  snappy::Benchmark_BM_ZFlatAll->Run();
-  snappy::Benchmark_BM_ZFlatIncreasingTableSize->Run();
-
-  std::fprintf(stderr, "\n");
-}
-
-#ifndef HAVE_GTEST
-
-static inline int RUN_ALL_TESTS() {
-  std::fprintf(stderr, "Running correctness tests.\n");
-  snappy::Test_CorruptedTest_VerifyCorrupted();
-  snappy::Test_Snappy_SimpleTests();
-  snappy::Test_Snappy_MaxBlowup();
-  snappy::Test_Snappy_RandomData();
-  snappy::Test_Snappy_FourByteOffset();
-  snappy::Test_SnappyCorruption_TruncatedVarint();
-  snappy::Test_SnappyCorruption_UnterminatedVarint();
-  snappy::Test_SnappyCorruption_OverflowingVarint();
-  snappy::Test_Snappy_ReadPastEndOfBuffer();
-  snappy::Test_Snappy_FindMatchLength();
-  snappy::Test_Snappy_FindMatchLengthRandom();
-  std::fprintf(stderr, "All tests passed.\n");
-
-  return 0;
-}
-
-#endif  // HAVE_GTEST
-
-// For main().
-namespace snappy {
-
-// Logging.
-
-#define LOG(level) LogMessage()
-#define VLOG(level) true ? (void)0 : \
-    snappy::LogMessageVoidify() & snappy::LogMessage()
-
-class LogMessage {
- public:
-  LogMessage() { }
-  ~LogMessage() {
-    std::cerr << std::endl;
-  }
-
-  LogMessage& operator<<(const std::string& msg) {
-    std::cerr << msg;
-    return *this;
-  }
-  LogMessage& operator<<(int x) {
-    std::cerr << x;
-    return *this;
-  }
-};
-
-// Asserts, both versions activated in debug mode only,
-// and ones that are always active.
-
-#define CRASH_UNLESS(condition) \
-    SNAPPY_PREDICT_TRUE(condition) ? (void)0 : \
-    snappy::LogMessageVoidify() & snappy::LogMessageCrash()
-
-#ifdef _MSC_VER
-// ~LogMessageCrash calls std::abort() and therefore never exits. This is by
-// design, so temporarily disable warning C4722.
-#pragma warning(push)
-#pragma warning(disable:4722)
-#endif
-
-class LogMessageCrash : public LogMessage {
- public:
-  LogMessageCrash() { }
-  ~LogMessageCrash() {
-    std::cerr << std::endl;
-    std::abort();
-  }
-};
-
-#ifdef _MSC_VER
-#pragma warning(pop)
-#endif
-
-// This class is used to explicitly ignore values in the conditional
-// logging macros.  This avoids compiler warnings like "value computed
-// is not used" and "statement has no effect".
-
-class LogMessageVoidify {
- public:
-  LogMessageVoidify() { }
-  // This has to be an operator with a precedence lower than << but
-  // higher than ?:
-  void operator&(const LogMessage&) { }
-};
-
-#define CHECK(cond) CRASH_UNLESS(cond)
-#define CHECK_LE(a, b) CRASH_UNLESS((a) <= (b))
-#define CHECK_GE(a, b) CRASH_UNLESS((a) >= (b))
-#define CHECK_EQ(a, b) CRASH_UNLESS((a) == (b))
-#define CHECK_NE(a, b) CRASH_UNLESS((a) != (b))
-#define CHECK_LT(a, b) CRASH_UNLESS((a) < (b))
-#define CHECK_GT(a, b) CRASH_UNLESS((a) > (b))
-#define CHECK_OK(cond) (cond).CheckSuccess()
-
-}  // namespace snappy
-
-#endif  // THIRD_PARTY_SNAPPY_OPENSOURCE_SNAPPY_TEST_H_