couchbase 3.0.0.alpha.2-universal-darwin-19 → 3.0.0-universal-darwin-19

data/ext/third_party/asio/asio/src/tools/handlerviz.pl

@@ -1,299 +0,0 @@
-#!/usr/bin/perl -w
-#
-# handlerviz.pl
-# ~~~~~~~~~~~~~
-#
-# A visualisation tool for post-processing the debug output generated by
-# Asio-based programs. Programs write this output to the standard error stream
-# when compiled with the define `ASIO_ENABLE_HANDLER_TRACKING'.
-#
-# This tool generates output intended for use with the GraphViz tool `dot'. For
-# example, to convert output to a PNG image, use:
-#
-#   perl handlerviz.pl < output.txt | dot -Tpng > output.png
-#
-# To convert to a PDF file, use:
-#
-#   perl handlerviz.pl < output.txt | dot -Tpdf > output.pdf
-#
-# Copyright (c) 2011 Christopher M. Kohlhoff (chris at kohlhoff dot com)
-#
-# Distributed under the Boost Software License, Version 1.0. (See accompanying
-# file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-#
-
-use strict;
-
-my %nodes = ();
-my @edges = ();
-my %anon_nodes = ();
-my $anon_id = 0;
-my %all_nodes = ();
-
-#-------------------------------------------------------------------------------
-# Parse the debugging output and populate the nodes and edges.
-
-sub parse_debug_output()
-{
-  while (my $line = <>)
-  {
-    chomp($line);
-
-    if ($line =~ /\@asio\|([^|]*)\|([^|]*)\|(.*)$/)
-    {
-      my $timestamp = $1;
-      my $action = $2;
-      my $description = $3;
-
-      # Handler creation.
-      if ($action =~ /^([0-9]+)\*([0-9]+)$/)
-      {
-        my $begin = $1;
-        my $end = $2;
-        my $label = $description;
-        $label =~ s/\./\\n/g;
-
-        if ($begin eq "0")
-        {
-          $begin = "a" . $anon_id++;
-          $anon_nodes{$begin} = $timestamp;
-          $all_nodes{"$timestamp-$begin"} = $begin;
-        }
-
-        my %edge = ( begin=>$begin, end=>$end, label=>$label );
-        push(@edges, \%edge);
-      }
-
-      # Begin handler invocation. 
-      elsif ($action =~ /^>([0-9]+)$/)
-      {
-        my %new_node = ( label=>$description, entry=>$timestamp );
-        $new_node{content} = ();
-        $nodes{$1} = \%new_node;
-        $all_nodes{"$timestamp-$1"} = $1;
-      }
-
-      # End handler invocation.
-      elsif ($action =~ /^<([0-9]+)$/)
-      {
-        $nodes{$1}->{exit} = $timestamp;
-      }
-
-      # Handler threw exception.
-      elsif ($action =~ /^!([0-9]+)$/)
-      {
-        push(@{$nodes{$1}->{content}}, "exception");
-      }
-
-      # Handler was destroyed without being invoked.
-      elsif ($action =~ /^~([0-9]+)$/)
-      {
-        my %new_node = ( label=>"$timestamp destroyed" );
-        $new_node{content} = ();
-        $nodes{$1} = \%new_node;
-        $all_nodes{"$timestamp-$1"} = $1;
-      }
-
-      # Handler performed some operation.
-      elsif ($action =~ /^([0-9]+)$/)
-      {
-        if ($1 eq "0")
-        {
-          my $id = "a" . $anon_id++;
-          $anon_nodes{$id} = "$timestamp\\l$description";
-          $all_nodes{"$timestamp-$id"} = $id;
-        }
-        else
-        {
-          push(@{$nodes{$1}->{content}}, "$description");
-        }
-      }
-    }
-  }
-}
-
-#-------------------------------------------------------------------------------
-# Helper function to convert a string to escaped HTML text.
-
-sub escape($)
-{
-  my $text = shift;
-  $text =~ s/&/\&amp\;/g;
-  $text =~ s/</\&lt\;/g;
-  $text =~ s/>/\&gt\;/g;
-  $text =~ s/\t/    /g;
-  return $text;
-}
-
-#-------------------------------------------------------------------------------
-# Templates for dot output.
-
-my $graph_header = <<"EOF";
-/* Generated by asioviz.pl */
-digraph G
-{
-graph [ nodesep="1" ];
-node [ shape="box", fontsize="9" ];
-edge [ arrowtail="dot", fontsize="9" ];
-EOF
-
-my $graph_footer = <<"EOF";
-}
-EOF
-
-my $node_header = <<"EOF";
-"%name%"
-[
-label=<<table border="0" cellspacing="0">
-<tr><td align="left" bgcolor="gray" border="0">%label%</td></tr>
-EOF
-
-my $node_footer = <<"EOF";
-</table>>
-]
-EOF
-
-my $node_content = <<"EOF";
-<tr><td align="left" bgcolor="white" border="0">
-<font face="mono" point-size="9">%content%</font>
-</td></tr>
-EOF
-
-my $anon_nodes_header = <<"EOF";
-{
-node [ shape="record" ];
-EOF
-
-my $anon_nodes_footer = <<"EOF";
-}
-EOF
-
-my $anon_node = <<"EOF";
-"%name%" [ label="%label%", color="gray" ];
-EOF
-
-my $edges_header = <<"EOF";
-{
-edge [ style="dashed", arrowhead="open", weight="100" ];
-EOF
-
-my $edges_footer = <<"EOF";
-}
-EOF
-
-my $edge = <<"EOF";
-"%begin%" -> "%end%" [ label="%label%" ]
-EOF
-
-my $node_order_header = <<"EOF";
-{
-edge [ style="invis", weight="1" ];
-EOF
-
-my $node_order_footer = <<"EOF";
-}
-EOF
-
-my $node_order = <<"EOF";
-"%begin%" -> "%end%"
-EOF
-
-#-------------------------------------------------------------------------------
-# Generate dot output from the nodes and edges.
-
-sub print_nodes()
-{
-  foreach my $name (sort keys %nodes)
-  {
-    my $node = $nodes{$name};
-    my $entry = $node->{entry};
-    my $exit = $node->{exit};
-    my $label = escape($node->{label});
-    my $header = $node_header;
-    $header =~ s/%name%/$name/g;
-    $header =~ s/%label%/$label/g;
-    print($header);
-
-    my $line = $node_content;
-    my $content = $entry . " + " . sprintf("%.6f", $exit - $entry) . "s";
-    $line =~ s/%content%/$content/g;
-    print($line);
-
-    foreach my $content (@{$node->{content}})
-    {
-      $content = escape($content);
-      $content = " " if length($content) == 0;
-      my $line = $node_content;
-      $line =~ s/%content%/$content/g;
-      print($line);
-    }
-
-    print($node_footer);
-  }
-}
-
-sub print_anon_nodes()
-{
-  print($anon_nodes_header);
-  foreach my $name (sort keys %anon_nodes)
-  {
-    my $label = $anon_nodes{$name};
-    my $line = $anon_node;
-    $line =~ s/%name%/$name/g;
-    $line =~ s/%label%/$label/g;
-    print($line);
-  }
-  print($edges_footer);
-}
-
-sub print_edges()
-{
-  print($edges_header);
-  foreach my $e (@edges)
-  {
-    my $begin = $e->{begin};
-    my $end = $e->{end};
-    my $label = $e->{label};
-    my $line = $edge;
-    $line =~ s/%begin%/$begin/g;
-    $line =~ s/%end%/$end/g;
-    $line =~ s/%label%/$label/g;
-    print($line);
-  }
-  print($edges_footer);
-}
-
-sub print_node_order()
-{
-  my $prev = "";
-  print($node_order_header);
-  foreach my $name (sort keys %all_nodes)
-  {
-    if ($prev ne "")
-    {
-      my $begin = $prev;
-      my $end = $all_nodes{$name};
-      my $line = $node_order;
-      $line =~ s/%begin%/$begin/g;
-      $line =~ s/%end%/$end/g;
-      print($line);
-    }
-    $prev = $all_nodes{$name};
-  }
-  print($node_order_footer);
-}
-
-sub generate_dot()
-{
-  print($graph_header);
-  print_nodes();
-  print_anon_nodes();
-  print_edges();
-  print_node_order();
-  print($graph_footer);
-}
-
-#-------------------------------------------------------------------------------
-
-parse_debug_output();
-generate_dot();

data/ext/third_party/gsl/tests/CMakeLists.txt

@@ -1,267 +0,0 @@
-cmake_minimum_required(VERSION 3.0.2)
-
-project(GSLTests CXX)
-
-# will make visual studio generated project group files
-set_property(GLOBAL PROPERTY USE_FOLDERS ON)
-
-configure_file(CMakeLists.txt.in googletest-download/CMakeLists.txt)
-execute_process(
-    COMMAND ${CMAKE_COMMAND} -G "${CMAKE_GENERATOR}" .
-    RESULT_VARIABLE result
-    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/googletest-download
-)
-if(result)
-    message(FATAL_ERROR "CMake step for googletest failed: ${result}")
-endif()
-
-execute_process(
-    COMMAND ${CMAKE_COMMAND} --build .
-    RESULT_VARIABLE result
-    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/googletest-download
-)
-if(result)
-    message(FATAL_ERROR "CMake step for googletest failed: ${result}")
-endif()
-
-set(gtest_force_shared_crt ON CACHE BOOL "" FORCE)
-
-add_subdirectory(
-    ${CMAKE_CURRENT_BINARY_DIR}/googletest-src
-    ${CMAKE_CURRENT_BINARY_DIR}/googletest-build
-    EXCLUDE_FROM_ALL
-)
-
-if (MSVC AND (GSL_CXX_STANDARD EQUAL 17))
-    set(GSL_CPLUSPLUS_OPT -Zc:__cplusplus -permissive-)
-endif()
-
-# this interface adds compile options to how the tests are run
-# please try to keep entries ordered =)
-add_library(gsl_tests_config INTERFACE)
-if(MSVC) # MSVC or simulating MSVC
-    target_compile_options(gsl_tests_config INTERFACE
-        ${GSL_CPLUSPLUS_OPT}
-        /EHsc
-        /W4
-        /WX
-        $<$<CXX_COMPILER_ID:MSVC>:
-          /wd4996  # Use of function or classes marked [[deprecated]]
-          /wd26409 # CppCoreCheck - GTest
-          /wd26426 # CppCoreCheck - GTest
-          /wd26440 # CppCoreCheck - GTest
-          /wd26446 # CppCoreCheck - prefer gsl::at()
-          /wd26472 # CppCoreCheck - use gsl::narrow(_cast)
-          /wd26481 # CppCoreCheck - use span instead of pointer arithmetic
-          $<$<VERSION_LESS:$<CXX_COMPILER_VERSION>,1920>: # VS2015
-            /wd4189 # variable is initialized but not referenced
-            $<$<NOT:$<CONFIG:Debug>>: # Release, RelWithDebInfo
-              /wd4702 # Unreachable code
-            >
-          >
-        >
-        $<$<CXX_COMPILER_ID:Clang>:
-          -Weverything
-          -Wno-c++98-compat
-          -Wno-c++98-compat-pedantic
-          -Wno-covered-switch-default # GTest
-          -Wno-deprecated-declarations # Allow tests for [[deprecated]] elements
-          -Wno-global-constructors # GTest
-          -Wno-language-extension-token # GTest gtest-port.h
-          -Wno-missing-braces
-          -Wno-missing-prototypes
-          -Wno-shift-sign-overflow # GTest gtest-port.h
-          -Wno-undef # GTest
-          -Wno-used-but-marked-unused # GTest EXPECT_DEATH
-          $<$<EQUAL:${GSL_CXX_STANDARD},14>: # no support for [[maybe_unused]]
-            -Wno-unused-member-function
-            -Wno-unused-variable
-          >
-        >
-    )
-else()
-    target_compile_options(gsl_tests_config INTERFACE
-        -fno-strict-aliasing
-        -Wall
-        -Wcast-align
-        -Wconversion
-        -Wctor-dtor-privacy
-        -Werror
-        -Wextra
-        -Wpedantic
-        -Wshadow
-        -Wsign-conversion
-        -Wno-deprecated-declarations # Allow tests for [[deprecated]] elements
-        $<$<OR:$<CXX_COMPILER_ID:Clang>,$<CXX_COMPILER_ID:AppleClang>>:
-          -Weverything
-          -Wno-c++98-compat
-          -Wno-c++98-compat-pedantic
-          -Wno-missing-braces
-          -Wno-covered-switch-default # GTest
-          -Wno-global-constructors # GTest
-          -Wno-missing-prototypes
-          -Wno-padded
-          -Wno-unknown-attributes
-          -Wno-used-but-marked-unused # GTest EXPECT_DEATH
-          -Wno-weak-vtables
-          $<$<EQUAL:${GSL_CXX_STANDARD},14>: # no support for [[maybe_unused]]
-            -Wno-unused-member-function
-            -Wno-unused-variable
-          >
-        >
-        $<$<CXX_COMPILER_ID:Clang>:
-          $<$<AND:$<VERSION_GREATER:$<CXX_COMPILER_VERSION>,4.99>,$<VERSION_LESS:$<CXX_COMPILER_VERSION>,6>>:
-            $<$<EQUAL:${GSL_CXX_STANDARD},17>:-Wno-undefined-func-template>
-          >
-        >
-        $<$<CXX_COMPILER_ID:AppleClang>:
-          $<$<AND:$<VERSION_GREATER:$<CXX_COMPILER_VERSION>,9.1>,$<VERSION_LESS:$<CXX_COMPILER_VERSION>,10>>:
-            $<$<EQUAL:${GSL_CXX_STANDARD},17>:-Wno-undefined-func-template>
-          >
-        >
-        $<$<CXX_COMPILER_ID:GNU>:
-          -Wdouble-promotion # float implicit to double
-          -Wlogical-op # suspicious uses of logical operators
-          $<$<NOT:$<VERSION_LESS:$<CXX_COMPILER_VERSION>,6>>:
-            -Wduplicated-cond # duplicated if-else conditions
-            -Wmisleading-indentation
-            -Wnull-dereference
-            $<$<EQUAL:${GSL_CXX_STANDARD},14>: # no support for [[maybe_unused]]
-              -Wno-unused-variable
-            >
-          >
-          $<$<NOT:$<VERSION_LESS:$<CXX_COMPILER_VERSION>,7>>:
-            -Wduplicated-branches # identical if-else branches
-          >
-        >
-    )
-endif(MSVC)
-
-# for tests to find the gtest header
-target_include_directories(gsl_tests_config SYSTEM INTERFACE
-    googletest/googletest/include
-)
-
-set_property(TARGET  PROPERTY FOLDER "GSL_tests")
-
-function(add_gsl_test name)
-    add_executable(${name} ${name}.cpp)
-    target_link_libraries(${name}
-        GSL
-        gsl_tests_config
-        gtest_main
-    )
-    add_test(
-        ${name}
-        ${name}
-    )
-    # group all tests under GSL_tests
-    set_property(TARGET ${name} PROPERTY FOLDER "GSL_tests")
-endfunction()
-
-add_gsl_test(span_tests)
-add_gsl_test(span_ext_tests)
-add_gsl_test(span_compatibility_tests)
-add_gsl_test(multi_span_tests)
-add_gsl_test(strided_span_tests)
-add_gsl_test(string_span_tests)
-add_gsl_test(at_tests)
-add_gsl_test(bounds_tests)
-add_gsl_test(notnull_tests)
-add_gsl_test(assertion_tests)
-add_gsl_test(utils_tests)
-add_gsl_test(owner_tests)
-add_gsl_test(byte_tests)
-add_gsl_test(algorithm_tests)
-add_gsl_test(strict_notnull_tests)
-
-
-# No exception tests
-
-foreach(flag_var
-        CMAKE_CXX_FLAGS CMAKE_CXX_FLAGS_DEBUG CMAKE_CXX_FLAGS_RELEASE
-        CMAKE_CXX_FLAGS_MINSIZEREL CMAKE_CXX_FLAGS_RELWITHDEBINFO)
-    STRING (REGEX REPLACE "/EHsc" "" ${flag_var} "${${flag_var}}")
-endforeach(flag_var)
-
-# this interface adds compile options to how the tests are run
-# please try to keep entries ordered =)
-add_library(gsl_tests_config_noexcept INTERFACE)
-if(MSVC) # MSVC or simulating MSVC
-    target_compile_definitions(gsl_tests_config_noexcept INTERFACE
-        _HAS_EXCEPTIONS=0 # disable exceptions in the Microsoft STL
-    )
-    target_compile_options(gsl_tests_config_noexcept INTERFACE
-        ${GSL_CPLUSPLUS_OPT}
-        /W4
-        /WX
-        $<$<CXX_COMPILER_ID:MSVC>:
-          /wd4577
-          /wd4702
-          /wd26440 # CppCoreCheck - GTest
-          /wd26446 # CppCoreCheck - prefer gsl::at()
-        >
-        $<$<CXX_COMPILER_ID:Clang>:
-          -Weverything
-          -Wno-c++98-compat
-          -Wno-c++98-compat-pedantic
-          -Wno-missing-prototypes
-          -Wno-unknown-attributes
-        >
-    )
-else()
-    target_compile_options(gsl_tests_config_noexcept INTERFACE
-        -fno-exceptions
-        -fno-strict-aliasing
-        -Wall
-        -Wcast-align
-        -Wconversion
-        -Wctor-dtor-privacy
-        -Werror
-        -Wextra
-        -Wpedantic
-        -Wshadow
-        -Wsign-conversion
-        $<$<OR:$<CXX_COMPILER_ID:Clang>,$<CXX_COMPILER_ID:AppleClang>>:
-          -Weverything
-          -Wno-c++98-compat
-          -Wno-c++98-compat-pedantic
-          -Wno-missing-prototypes
-          -Wno-unknown-attributes
-          -Wno-weak-vtables
-        >
-        $<$<CXX_COMPILER_ID:GNU>:
-          -Wdouble-promotion # float implicit to double
-          -Wlogical-op # suspicious uses of logical operators
-          -Wuseless-cast # casting to its own type
-          $<$<NOT:$<VERSION_LESS:$<CXX_COMPILER_VERSION>,6>>:
-            -Wduplicated-cond # duplicated if-else conditions
-            -Wmisleading-indentation
-            -Wnull-dereference
-          >
-          $<$<NOT:$<VERSION_LESS:$<CXX_COMPILER_VERSION>,7>>:
-            -Wduplicated-branches # identical if-else branches
-          >
-          $<$<NOT:$<VERSION_LESS:$<CXX_COMPILER_VERSION>,8>>:
-            -Wcast-align=strict # increase alignment (i.e. char* to int*)
-          >
-        >
-    )
-endif(MSVC)
-
-function(add_gsl_test_noexcept name)
-    add_executable(${name} ${name}.cpp)
-    target_link_libraries(${name}
-        GSL
-        gsl_tests_config_noexcept
-        gtest_main
-    )
-    add_test(
-      ${name}
-      ${name}
-    )
-    # group all tests under GSL_tests_noexcept
-    set_property(TARGET ${name} PROPERTY FOLDER "GSL_tests_noexcept")
-endfunction()
-
-add_gsl_test_noexcept(no_exception_ensure_tests)