couchbase 1.3.15 → 3.3.0

data/ext/couchbase/third_party/asio/asio/include/asio/read_at.hpp

@@ -0,0 +1,738 @@
+//
+// read_at.hpp
+// ~~~~~~~~~~~
+//
+// Copyright (c) 2003-2021 Christopher M. Kohlhoff (chris at kohlhoff dot com)
+//
+// Distributed under the Boost Software License, Version 1.0. (See accompanying
+// file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+#ifndef ASIO_READ_AT_HPP
+#define ASIO_READ_AT_HPP
+
+#if defined(_MSC_VER) && (_MSC_VER >= 1200)
+# pragma once
+#endif // defined(_MSC_VER) && (_MSC_VER >= 1200)
+
+#include "asio/detail/config.hpp"
+#include <cstddef>
+#include "asio/async_result.hpp"
+#include "asio/detail/cstdint.hpp"
+#include "asio/error.hpp"
+
+#if !defined(ASIO_NO_EXTENSIONS)
+# include "asio/basic_streambuf_fwd.hpp"
+#endif // !defined(ASIO_NO_EXTENSIONS)
+
+#include "asio/detail/push_options.hpp"
+
+namespace asio {
+
+/**
+ * @defgroup read_at asio::read_at
+ *
+ * @brief The @c read_at function is a composed operation that reads a certain
+ * amount of data at the specified offset before returning.
+ */
+/*@{*/
+
+/// Attempt to read a certain amount of data at the specified offset before
+/// returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * random access device at the specified offset. The call will block until one
+ * of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the SyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * device.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code asio::read_at(d, 42, asio::buffer(data, size)); @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read_at(
+ *     d, 42, buffers,
+ *     asio::transfer_all()); @endcode
+ */
+template <typename SyncRandomAccessReadDevice, typename MutableBufferSequence>
+std::size_t read_at(SyncRandomAccessReadDevice& d,
+    uint64_t offset, const MutableBufferSequence& buffers);
+
+/// Attempt to read a certain amount of data at the specified offset before
+/// returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * random access device at the specified offset. The call will block until one
+ * of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the SyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * device.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code asio::read_at(d, 42,
+ *     asio::buffer(data, size), ec); @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read_at(
+ *     d, 42, buffers,
+ *     asio::transfer_all(), ec); @endcode
+ */
+template <typename SyncRandomAccessReadDevice, typename MutableBufferSequence>
+std::size_t read_at(SyncRandomAccessReadDevice& d,
+    uint64_t offset, const MutableBufferSequence& buffers,
+    asio::error_code& ec);
+
+/// Attempt to read a certain amount of data at the specified offset before
+/// returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * random access device at the specified offset. The call will block until one
+ * of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the SyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * device.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some_at operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the device's read_some_at function.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code asio::read_at(d, 42, asio::buffer(data, size),
+ *     asio::transfer_at_least(32)); @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ */
+template <typename SyncRandomAccessReadDevice, typename MutableBufferSequence,
+    typename CompletionCondition>
+std::size_t read_at(SyncRandomAccessReadDevice& d,
+    uint64_t offset, const MutableBufferSequence& buffers,
+    CompletionCondition completion_condition);
+
+/// Attempt to read a certain amount of data at the specified offset before
+/// returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * random access device at the specified offset. The call will block until one
+ * of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the SyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * device.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some_at operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the device's read_some_at function.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes read. If an error occurs, returns the total
+ * number of bytes successfully transferred prior to the error.
+ */
+template <typename SyncRandomAccessReadDevice, typename MutableBufferSequence,
+    typename CompletionCondition>
+std::size_t read_at(SyncRandomAccessReadDevice& d,
+    uint64_t offset, const MutableBufferSequence& buffers,
+    CompletionCondition completion_condition, asio::error_code& ec);
+
+#if !defined(ASIO_NO_EXTENSIONS)
+#if !defined(ASIO_NO_IOSTREAM)
+
+/// Attempt to read a certain amount of data at the specified offset before
+/// returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * random access device at the specified offset. The call will block until one
+ * of the following conditions is true:
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the SyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param b The basic_streambuf object into which the data will be read.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read_at(
+ *     d, 42, b,
+ *     asio::transfer_all()); @endcode
+ */
+template <typename SyncRandomAccessReadDevice, typename Allocator>
+std::size_t read_at(SyncRandomAccessReadDevice& d,
+    uint64_t offset, basic_streambuf<Allocator>& b);
+
+/// Attempt to read a certain amount of data at the specified offset before
+/// returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * random access device at the specified offset. The call will block until one
+ * of the following conditions is true:
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the SyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param b The basic_streambuf object into which the data will be read.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read_at(
+ *     d, 42, b,
+ *     asio::transfer_all(), ec); @endcode
+ */
+template <typename SyncRandomAccessReadDevice, typename Allocator>
+std::size_t read_at(SyncRandomAccessReadDevice& d,
+    uint64_t offset, basic_streambuf<Allocator>& b,
+    asio::error_code& ec);
+
+/// Attempt to read a certain amount of data at the specified offset before
+/// returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * random access device at the specified offset. The call will block until one
+ * of the following conditions is true:
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the SyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param b The basic_streambuf object into which the data will be read.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some_at operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the device's read_some_at function.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ */
+template <typename SyncRandomAccessReadDevice, typename Allocator,
+    typename CompletionCondition>
+std::size_t read_at(SyncRandomAccessReadDevice& d,
+    uint64_t offset, basic_streambuf<Allocator>& b,
+    CompletionCondition completion_condition);
+
+/// Attempt to read a certain amount of data at the specified offset before
+/// returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * random access device at the specified offset. The call will block until one
+ * of the following conditions is true:
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the SyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param b The basic_streambuf object into which the data will be read.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some_at operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the device's read_some_at function.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes read. If an error occurs, returns the total
+ * number of bytes successfully transferred prior to the error.
+ */
+template <typename SyncRandomAccessReadDevice, typename Allocator,
+    typename CompletionCondition>
+std::size_t read_at(SyncRandomAccessReadDevice& d,
+    uint64_t offset, basic_streambuf<Allocator>& b,
+    CompletionCondition completion_condition, asio::error_code& ec);
+
+#endif // !defined(ASIO_NO_IOSTREAM)
+#endif // !defined(ASIO_NO_EXTENSIONS)
+
+/*@}*/
+/**
+ * @defgroup async_read_at asio::async_read_at
+ *
+ * @brief The @c async_read_at function is a composed asynchronous operation
+ * that reads a certain amount of data at the specified offset.
+ */
+/*@{*/
+
+/// Start an asynchronous operation to read a certain amount of data at the
+/// specified offset.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a random access device at the specified offset. The function call
+ * always returns immediately. The asynchronous operation will continue until
+ * one of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * async_read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the AsyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * device. Although the buffers object may be copied as necessary, ownership of
+ * the underlying memory blocks is retained by the caller, which must guarantee
+ * that they remain valid until the handler is called.
+ *
+ * @param handler The handler to be called when the read operation completes.
+ * Copies will be made of the handler as required. The function signature of the
+ * handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the handler will not be invoked from within this function. On
+ * immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code
+ * asio::async_read_at(d, 42, asio::buffer(data, size), handler);
+ * @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::async_read_at(
+ *     d, 42, buffers,
+ *     asio::transfer_all(),
+ *     handler); @endcode
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncRandomAccessReadDevice type's
+ * async_read_some_at operation.
+ */
+template <typename AsyncRandomAccessReadDevice, typename MutableBufferSequence,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadHandler
+        ASIO_DEFAULT_COMPLETION_TOKEN_TYPE(
+          typename AsyncRandomAccessReadDevice::executor_type)>
+ASIO_INITFN_AUTO_RESULT_TYPE(ReadHandler,
+    void (asio::error_code, std::size_t))
+async_read_at(AsyncRandomAccessReadDevice& d, uint64_t offset,
+    const MutableBufferSequence& buffers,
+    ASIO_MOVE_ARG(ReadHandler) handler
+      ASIO_DEFAULT_COMPLETION_TOKEN(
+        typename AsyncRandomAccessReadDevice::executor_type));
+
+/// Start an asynchronous operation to read a certain amount of data at the
+/// specified offset.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a random access device at the specified offset. The function call
+ * always returns immediately. The asynchronous operation will continue until
+ * one of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the AsyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * device. Although the buffers object may be copied as necessary, ownership of
+ * the underlying memory blocks is retained by the caller, which must guarantee
+ * that they remain valid until the handler is called.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest async_read_some_at operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the device's async_read_some_at function.
+ *
+ * @param handler The handler to be called when the read operation completes.
+ * Copies will be made of the handler as required. The function signature of the
+ * handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the handler will not be invoked from within this function. On
+ * immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code asio::async_read_at(d, 42,
+ *     asio::buffer(data, size),
+ *     asio::transfer_at_least(32),
+ *     handler); @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncRandomAccessReadDevice type's
+ * async_read_some_at operation.
+ */
+template <typename AsyncRandomAccessReadDevice,
+    typename MutableBufferSequence, typename CompletionCondition,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadHandler
+        ASIO_DEFAULT_COMPLETION_TOKEN_TYPE(
+          typename AsyncRandomAccessReadDevice::executor_type)>
+ASIO_INITFN_AUTO_RESULT_TYPE(ReadHandler,
+    void (asio::error_code, std::size_t))
+async_read_at(AsyncRandomAccessReadDevice& d,
+    uint64_t offset, const MutableBufferSequence& buffers,
+    CompletionCondition completion_condition,
+    ASIO_MOVE_ARG(ReadHandler) handler
+      ASIO_DEFAULT_COMPLETION_TOKEN(
+        typename AsyncRandomAccessReadDevice::executor_type));
+
+#if !defined(ASIO_NO_EXTENSIONS)
+#if !defined(ASIO_NO_IOSTREAM)
+
+/// Start an asynchronous operation to read a certain amount of data at the
+/// specified offset.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a random access device at the specified offset. The function call
+ * always returns immediately. The asynchronous operation will continue until
+ * one of the following conditions is true:
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * async_read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the AsyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param b A basic_streambuf object into which the data will be read. Ownership
+ * of the streambuf is retained by the caller, which must guarantee that it
+ * remains valid until the handler is called.
+ *
+ * @param handler The handler to be called when the read operation completes.
+ * Copies will be made of the handler as required. The function signature of the
+ * handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the handler will not be invoked from within this function. On
+ * immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::async_read_at(
+ *     d, 42, b,
+ *     asio::transfer_all(),
+ *     handler); @endcode
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncRandomAccessReadDevice type's
+ * async_read_some_at operation.
+ */
+template <typename AsyncRandomAccessReadDevice, typename Allocator,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadHandler
+        ASIO_DEFAULT_COMPLETION_TOKEN_TYPE(
+          typename AsyncRandomAccessReadDevice::executor_type)>
+ASIO_INITFN_AUTO_RESULT_TYPE(ReadHandler,
+    void (asio::error_code, std::size_t))
+async_read_at(AsyncRandomAccessReadDevice& d,
+    uint64_t offset, basic_streambuf<Allocator>& b,
+    ASIO_MOVE_ARG(ReadHandler) handler
+      ASIO_DEFAULT_COMPLETION_TOKEN(
+        typename AsyncRandomAccessReadDevice::executor_type));
+
+/// Start an asynchronous operation to read a certain amount of data at the
+/// specified offset.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a random access device at the specified offset. The function call
+ * always returns immediately. The asynchronous operation will continue until
+ * one of the following conditions is true:
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the device's
+ * async_read_some_at function.
+ *
+ * @param d The device from which the data is to be read. The type must support
+ * the AsyncRandomAccessReadDevice concept.
+ *
+ * @param offset The offset at which the data will be read.
+ *
+ * @param b A basic_streambuf object into which the data will be read. Ownership
+ * of the streambuf is retained by the caller, which must guarantee that it
+ * remains valid until the handler is called.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest async_read_some_at operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the device's async_read_some_at function.
+ *
+ * @param handler The handler to be called when the read operation completes.
+ * Copies will be made of the handler as required. The function signature of the
+ * handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the handler will not be invoked from within this function. On
+ * immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncRandomAccessReadDevice type's
+ * async_read_some_at operation.
+ */
+template <typename AsyncRandomAccessReadDevice,
+    typename Allocator, typename CompletionCondition,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadHandler
+        ASIO_DEFAULT_COMPLETION_TOKEN_TYPE(
+          typename AsyncRandomAccessReadDevice::executor_type)>
+ASIO_INITFN_AUTO_RESULT_TYPE(ReadHandler,
+    void (asio::error_code, std::size_t))
+async_read_at(AsyncRandomAccessReadDevice& d,
+    uint64_t offset, basic_streambuf<Allocator>& b,
+    CompletionCondition completion_condition,
+    ASIO_MOVE_ARG(ReadHandler) handler
+      ASIO_DEFAULT_COMPLETION_TOKEN(
+        typename AsyncRandomAccessReadDevice::executor_type));
+
+#endif // !defined(ASIO_NO_IOSTREAM)
+#endif // !defined(ASIO_NO_EXTENSIONS)
+
+/*@}*/
+
+} // namespace asio
+
+#include "asio/detail/pop_options.hpp"
+
+#include "asio/impl/read_at.hpp"
+
+#endif // ASIO_READ_AT_HPP