coffeecake 0.0.1

data/node_modules/jasmine-runner/node_modules/socket.io/support/expresso/deps/jscoverage/js/config/revdepth-nt.pl

@@ -0,0 +1,48 @@
+#! perl
+#
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 1998
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either of the GNU General Public License Version 2 or later (the "GPL"),
+# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+require "/ns/config/fastcwd.pl";
+
+$cur = &fastcwd;
+chdir($ARGV[0]);
+$newcur = &fastcwd;
+$newcurlen = length($newcur);
+
+# Skip common separating / unless $newcur is "/"
+$cur = substr($cur, $newcurlen + ($newcurlen > 1));
+print $cur;

data/node_modules/jasmine-runner/node_modules/socket.io/support/expresso/deps/jscoverage/js/config/revdepth.pl

@@ -0,0 +1,51 @@
+#! perl
+#
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 1998
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either of the GNU General Public License Version 2 or later (the "GPL"),
+# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+unshift(@INC, '/usr/lib/perl');
+unshift(@INC, '/usr/local/lib/perl');
+
+require "fastcwd.pl";
+
+$cur = &fastcwd;
+chdir($ARGV[0]);
+$newcur = &fastcwd;
+$newcurlen = length($newcur);
+
+# Skip common separating / unless $newcur is "/"
+$cur = substr($cur, $newcurlen + ($newcurlen > 1));
+print $cur;

data/node_modules/jasmine-runner/node_modules/socket.io/support/expresso/deps/jscoverage/js/config/rules.mk

@@ -0,0 +1,2269 @@
+# vim:set ts=8 sw=8 sts=8 noet:
+#
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 1998
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#  Chase Phillips <chase@mozilla.org>
+#  Benjamin Smedberg <benjamin@smedbergs.us>
+#  Jeff Walden <jwalden+code@mit.edu>
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either of the GNU General Public License Version 2 or later (the "GPL"),
+# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+NO_DIST_INSTALL = 1
+
+ifndef topsrcdir
+topsrcdir		= $(DEPTH)
+endif
+
+ifndef MOZILLA_DIR
+MOZILLA_DIR = $(topsrcdir)
+endif
+
+ifndef INCLUDED_CONFIG_MK
+include $(topsrcdir)/config/config.mk
+endif
+
+ifndef INCLUDED_VERSION_MK
+include $(topsrcdir)/config/version.mk
+endif
+
+REPORT_BUILD = @echo $(notdir $<)
+
+ifeq ($(OS_ARCH),OS2)
+EXEC			=
+else
+EXEC			= exec
+endif
+
+# ELOG prints out failed command when building silently (gmake -s).
+ifneq (,$(findstring -s,$(MAKEFLAGS)))
+  ELOG := $(EXEC) sh $(BUILD_TOOLS)/print-failed-commands.sh
+else
+  ELOG :=
+endif
+
+ifeq (,$(filter-out WINNT WINCE,$(OS_ARCH)))
+ifndef GNU_CC
+_LIBNAME_RELATIVE_PATHS=1
+endif
+endif
+
+ifeq (,$(filter-out WINNT WINCE,$(OS_ARCH)))
+PWD := $(shell pwd)
+_VPATH_SRCS = $(if $(filter /%,$<),$<,$(PWD)/$<)
+else
+_VPATH_SRCS = $<
+endif
+
+# Add $(DIST)/lib to VPATH so that -lfoo dependencies are followed
+VPATH += $(DIST)/lib
+ifdef LIBXUL_SDK
+VPATH += $(LIBXUL_SDK)/lib
+endif
+
+# EXPAND_LIBNAME - $(call EXPAND_LIBNAME,foo)
+# expands to foo.lib on platforms with import libs and -lfoo otherwise
+
+# EXPAND_LIBNAME_PATH - $(call EXPAND_LIBNAME_PATH,foo,dir)
+# expands to dir/foo.lib on platforms with import libs and
+# -Ldir -lfoo otherwise
+
+# EXPAND_MOZLIBNAME - $(call EXPAND_MOZLIBNAME,foo)
+# expands to $(DIST)/lib/foo.lib on platforms with import libs and
+# -lfoo otherwise
+
+ifdef _LIBNAME_RELATIVE_PATHS
+EXPAND_LIBNAME = $(foreach lib,$(1),$(LIB_PREFIX)$(lib).$(LIB_SUFFIX))
+EXPAND_LIBNAME_PATH = $(foreach lib,$(1),$(2)/$(LIB_PREFIX)$(lib).$(LIB_SUFFIX))
+EXPAND_MOZLIBNAME = $(foreach lib,$(1),$(DIST)/lib/$(LIB_PREFIX)$(lib).$(LIB_SUFFIX))
+else
+EXPAND_LIBNAME = $(addprefix -l,$(1))
+EXPAND_LIBNAME_PATH = -L$(2) $(addprefix -l,$(1))
+EXPAND_MOZLIBNAME = $(addprefix -l,$(1))
+endif
+
+ifdef EXTRA_DSO_LIBS
+EXTRA_DSO_LIBS	:= $(call EXPAND_MOZLIBNAME,$(EXTRA_DSO_LIBS))
+endif
+
+#
+# Library rules
+#
+# If BUILD_STATIC_LIBS or FORCE_STATIC_LIB is set, build a static library.
+# Otherwise, build a shared library.
+#
+
+ifndef LIBRARY
+ifdef LIBRARY_NAME
+ifneq (,$(filter OS2 WINNT WINCE,$(OS_ARCH)))
+ifdef SHORT_LIBNAME
+LIBRARY_NAME		:= $(SHORT_LIBNAME)
+endif
+endif
+LIBRARY			:= $(LIB_PREFIX)$(LIBRARY_NAME).$(LIB_SUFFIX)
+endif
+endif
+
+ifndef HOST_LIBRARY
+ifdef HOST_LIBRARY_NAME
+HOST_LIBRARY		:= $(LIB_PREFIX)$(HOST_LIBRARY_NAME).$(LIB_SUFFIX)
+endif
+endif
+
+ifdef LIBRARY
+ifneq (_1,$(FORCE_SHARED_LIB)_$(BUILD_STATIC_LIBS))
+ifdef MKSHLIB
+
+ifdef LIB_IS_C_ONLY
+MKSHLIB			= $(MKCSHLIB)
+endif
+
+ifdef MAKE_FRAMEWORK
+SHARED_LIBRARY		:= $(LIBRARY_NAME)
+else
+SHARED_LIBRARY		:= $(DLL_PREFIX)$(LIBRARY_NAME)$(DLL_SUFFIX)
+endif
+
+ifeq ($(OS_ARCH),OS2)
+DEF_FILE		:= $(SHARED_LIBRARY:.dll=.def)
+endif
+
+ifneq (,$(filter OS2 WINNT WINCE,$(OS_ARCH)))
+IMPORT_LIBRARY		:= $(LIB_PREFIX)$(LIBRARY_NAME).$(IMPORT_LIB_SUFFIX)
+endif
+
+ifdef MOZ_ENABLE_LIBXUL
+EMBED_MANIFEST_AT=2
+endif
+
+endif # MKSHLIB
+endif # FORCE_SHARED_LIB && !BUILD_STATIC_LIBS
+endif # LIBRARY
+
+ifeq (,$(BUILD_STATIC_LIBS)$(FORCE_STATIC_LIB))
+LIBRARY			:= $(NULL)
+endif
+
+ifeq (_1,$(FORCE_SHARED_LIB)_$(BUILD_STATIC_LIBS))
+SHARED_LIBRARY		:= $(NULL)
+DEF_FILE		:= $(NULL)
+IMPORT_LIBRARY		:= $(NULL)
+endif
+
+ifdef FORCE_STATIC_LIB
+ifndef FORCE_SHARED_LIB
+SHARED_LIBRARY		:= $(NULL)
+DEF_FILE		:= $(NULL)
+IMPORT_LIBRARY		:= $(NULL)
+endif
+endif
+
+ifdef FORCE_SHARED_LIB
+ifndef FORCE_STATIC_LIB
+LIBRARY			:= $(NULL)
+endif
+endif
+
+ifdef JAVA_LIBRARY_NAME
+JAVA_LIBRARY := $(JAVA_LIBRARY_NAME).jar
+endif
+
+ifeq (,$(filter-out WINNT WINCE,$(OS_ARCH)))
+ifndef GNU_CC
+
+#
+# All C++ files share a PDB file per directory. For parallel builds, this PDB
+# file is shared and locked by MSPDBSRV.EXE, starting with MSVC8 SP1. If
+# you're using MSVC 7.1 or MSVC8 without SP1, don't do parallel builds.
+#
+# The final PDB for libraries and programs is created by the linker and uses
+# a different name from the single PDB file created by the compiler. See
+# bug 462740.
+#
+COMPILE_PDBFILE = generated.pdb
+LINK_PDBFILE = $(basename $(@F)).pdb
+ifdef MOZ_DEBUG
+CODFILE=$(basename $(@F)).cod
+endif
+
+ifdef MOZ_MAPINFO
+ifdef LIBRARY_NAME
+MAPFILE=$(LIBRARY_NAME).map
+else
+MAPFILE=$(basename $(@F)).map
+endif # LIBRARY_NAME
+endif # MOZ_MAPINFO
+
+ifdef DEFFILE
+OS_LDFLAGS += -DEF:$(DEFFILE)
+EXTRA_DEPS += $(DEFFILE)
+endif
+
+ifdef MAPFILE
+OS_LDFLAGS += -MAP:$(MAPFILE)
+#CFLAGS += -Fm$(MAPFILE)
+#CXXFLAGS += -Fm$(MAPFILE)
+endif
+
+#ifdef CODFILE
+#CFLAGS += -Fa$(CODFILE) -FAsc
+#CFLAGS += -Fa$(CODFILE) -FAsc
+#endif
+
+endif # !GNU_CC
+
+ifdef ENABLE_CXX_EXCEPTIONS
+ifdef GNU_CC
+CXXFLAGS		+= -fexceptions
+else
+ifeq (,$(filter-out 1200 1300 1310,$(_MSC_VER)))
+CXXFLAGS		+= -GX
+else
+CXXFLAGS		+= -EHsc
+endif # _MSC_VER
+endif # GNU_CC
+endif # ENABLE_CXX_EXCEPTIONS
+endif # WINNT
+
+ifeq (,$(filter-out WINNT WINCE,$(HOST_OS_ARCH)))
+HOST_PDBFILE=$(basename $(@F)).pdb
+endif
+
+ifndef TARGETS
+TARGETS			= $(LIBRARY) $(SHARED_LIBRARY) $(PROGRAM) $(SIMPLE_PROGRAMS) $(HOST_LIBRARY) $(HOST_PROGRAM) $(HOST_SIMPLE_PROGRAMS) $(JAVA_LIBRARY)
+endif
+
+ifndef OBJS
+_OBJS			= \
+	$(JRI_STUB_CFILES) \
+	$(addsuffix .$(OBJ_SUFFIX), $(JMC_GEN)) \
+	$(CSRCS:.c=.$(OBJ_SUFFIX)) \
+	$(patsubst %.cc,%.$(OBJ_SUFFIX),$(CPPSRCS:.cpp=.$(OBJ_SUFFIX))) \
+	$(CMSRCS:.m=.$(OBJ_SUFFIX)) \
+	$(CMMSRCS:.mm=.$(OBJ_SUFFIX)) \
+	$(ASFILES:.$(ASM_SUFFIX)=.$(OBJ_SUFFIX))
+OBJS	= $(strip $(_OBJS))
+endif
+
+ifndef HOST_OBJS
+_HOST_OBJS		= \
+        $(addprefix host_,$(HOST_CSRCS:.c=.$(OBJ_SUFFIX))) \
+	$(addprefix host_,$(patsubst %.cc,%.$(OBJ_SUFFIX),$(HOST_CPPSRCS:.cpp=.$(OBJ_SUFFIX)))) \
+	$(addprefix host_,$(HOST_CMSRCS:.m=.$(OBJ_SUFFIX))) \
+	$(addprefix host_,$(HOST_CMMSRCS:.mm=.$(OBJ_SUFFIX)))
+HOST_OBJS = $(strip $(_HOST_OBJS))
+endif
+
+LIBOBJS			:= $(addprefix \", $(OBJS))
+LIBOBJS			:= $(addsuffix \", $(LIBOBJS))
+
+ifndef MOZ_AUTO_DEPS
+ifneq (,$(OBJS)$(XPIDLSRCS)$(SDK_XPIDLSRCS)$(SIMPLE_PROGRAMS))
+MDDEPFILES		= $(addprefix $(MDDEPDIR)/,$(OBJS:.$(OBJ_SUFFIX)=.pp))
+ifndef NO_GEN_XPT
+MDDEPFILES		+= $(addprefix $(MDDEPDIR)/,$(XPIDLSRCS:.idl=.xpt)) \
+			   $(addprefix $(MDDEPDIR)/,$(SDK_XPIDLSRCS:.idl=.xpt))
+endif
+endif
+endif
+
+ALL_TRASH = \
+	$(GARBAGE) $(TARGETS) $(OBJS) $(PROGOBJS) LOGS TAGS a.out \
+	$(filter-out $(ASFILES),$(OBJS:.$(OBJ_SUFFIX)=.s)) $(OBJS:.$(OBJ_SUFFIX)=.ii) \
+	$(OBJS:.$(OBJ_SUFFIX)=.i) \
+	$(HOST_PROGOBJS) $(HOST_OBJS) $(IMPORT_LIBRARY) $(DEF_FILE)\
+	$(EXE_DEF_FILE) so_locations _gen _stubs $(wildcard *.res) $(wildcard *.RES) \
+	$(wildcard *.pdb) $(CODFILE) $(MAPFILE) $(IMPORT_LIBRARY) \
+	$(SHARED_LIBRARY:$(DLL_SUFFIX)=.exp) $(wildcard *.ilk) \
+	$(PROGRAM:$(BIN_SUFFIX)=.exp) $(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.exp) \
+	$(PROGRAM:$(BIN_SUFFIX)=.lib) $(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.lib) \
+	$(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.$(OBJ_SUFFIX)) \
+	$(wildcard gts_tmp_*) $(LIBRARY:%.a=.%.timestamp)
+ALL_TRASH_DIRS = \
+	$(GARBAGE_DIRS) /no-such-file
+
+ifdef QTDIR
+GARBAGE                 += $(MOCSRCS)
+endif
+
+ifdef SIMPLE_PROGRAMS
+GARBAGE			+= $(SIMPLE_PROGRAMS:%=%.$(OBJ_SUFFIX))
+endif
+
+ifdef HOST_SIMPLE_PROGRAMS
+GARBAGE			+= $(HOST_SIMPLE_PROGRAMS:%=%.$(OBJ_SUFFIX))
+endif
+
+#
+# the Solaris WorkShop template repository cache.  it occasionally can get
+# out of sync, so targets like clobber should kill it.
+#
+ifeq ($(OS_ARCH),SunOS)
+ifeq ($(GNU_CXX),)
+GARBAGE_DIRS += SunWS_cache
+endif
+endif
+
+ifeq ($(OS_ARCH),OpenVMS)
+GARBAGE			+= $(wildcard *.*_defines)
+ifdef SHARED_LIBRARY
+VMS_SYMVEC_FILE		= $(SHARED_LIBRARY:$(DLL_SUFFIX)=_symvec.opt)
+ifdef MOZ_DEBUG
+VMS_SYMVEC_FILE_MODULE	= $(topsrcdir)/build/unix/vms/$(notdir $(SHARED_LIBRARY:$(DLL_SUFFIX)=_dbg_symvec.opt))
+else
+VMS_SYMVEC_FILE_MODULE	= $(topsrcdir)/build/unix/vms/$(notdir $(SHARED_LIBRARY:$(DLL_SUFFIX)=_symvec.opt))
+endif
+VMS_SYMVEC_FILE_COMP	= $(topsrcdir)/build/unix/vms/component_symvec.opt
+GARBAGE			+= $(VMS_SYMVEC_FILE)
+ifdef IS_COMPONENT
+DSO_LDOPTS := $(filter-out -auto_symvec,$(DSO_LDOPTS)) $(VMS_SYMVEC_FILE)
+endif
+endif
+endif
+
+XPIDL_GEN_DIR		= _xpidlgen
+
+ifdef MOZ_UPDATE_XTERM
+# Its good not to have a newline at the end of the titlebar string because it
+# makes the make -s output easier to read.  Echo -n does not work on all
+# platforms, but we can trick sed into doing it.
+UPDATE_TITLE = sed -e "s!Y!$@ in $(shell $(BUILD_TOOLS)/print-depth-path.sh)/$(dir)!" $(MOZILLA_DIR)/config/xterm.str;
+UPDATE_TITLE_export = sed -e "s!Y!export in $(shell $(BUILD_TOOLS)/print-depth-path.sh)/$*!" $(MOZILLA_DIR)/config/xterm.str;
+UPDATE_TITLE_libs = sed -e "s!Y!libs in $(shell $(BUILD_TOOLS)/print-depth-path.sh)/$*!" $(MOZILLA_DIR)/config/xterm.str;
+UPDATE_TITLE_tools = sed -e "s!Y!tools in $(shell $(BUILD_TOOLS)/print-depth-path.sh)/$*!" $(MOZILLA_DIR)/config/xterm.str;
+endif
+
+LOOP_OVER_DIRS = \
+    @$(EXIT_ON_ERROR) \
+    $(foreach dir,$(DIRS),$(UPDATE_TITLE) $(MAKE) -C $(dir) $@; ) true
+
+# we only use this for the makefiles target and other stuff that doesn't matter
+LOOP_OVER_PARALLEL_DIRS = \
+    @$(EXIT_ON_ERROR) \
+    $(foreach dir,$(PARALLEL_DIRS),$(UPDATE_TITLE) $(MAKE) -C $(dir) $@; ) true
+
+LOOP_OVER_STATIC_DIRS = \
+    @$(EXIT_ON_ERROR) \
+    $(foreach dir,$(STATIC_DIRS),$(UPDATE_TITLE) $(MAKE) -C $(dir) $@; ) true
+
+LOOP_OVER_TOOL_DIRS = \
+    @$(EXIT_ON_ERROR) \
+    $(foreach dir,$(TOOL_DIRS),$(UPDATE_TITLE) $(MAKE) -C $(dir) $@; ) true
+
+ifdef PARALLEL_DIRS
+# create a bunch of fake targets for order-only processing
+PARALLEL_DIRS_export = $(addsuffix _export,$(PARALLEL_DIRS))
+PARALLEL_DIRS_libs = $(addsuffix _libs,$(PARALLEL_DIRS))
+PARALLEL_DIRS_tools = $(addsuffix _tools,$(PARALLEL_DIRS))
+
+.PHONY: $(PARALLEL_DIRS_export) $(PARALLEL_DIRS_libs) $(PARALLEL_DIRS_tools)
+endif
+
+#
+# Now we can differentiate between objects used to build a library, and
+# objects used to build an executable in the same directory.
+#
+ifndef PROGOBJS
+PROGOBJS		= $(OBJS)
+endif
+
+ifndef HOST_PROGOBJS
+HOST_PROGOBJS		= $(HOST_OBJS)
+endif
+
+# MAKE_DIRS: List of directories to build while looping over directories.
+# A Makefile that needs $(MDDEPDIR) created but doesn't set any of these
+# variables we know to check can just set NEED_MDDEPDIR explicitly.
+ifneq (,$(OBJS)$(XPIDLSRCS)$(SDK_XPIDLSRCS)$(SIMPLE_PROGRAMS)$(NEED_MDDEPDIR))
+MAKE_DIRS		+= $(CURDIR)/$(MDDEPDIR)
+GARBAGE_DIRS		+= $(MDDEPDIR)
+endif
+
+#
+# Tags: emacs (etags), vi (ctags)
+# TAG_PROGRAM := ctags -L -
+#
+TAG_PROGRAM		= xargs etags -a
+
+#
+# Turn on C++ linking if we have any .cpp or .mm files
+# (moved this from config.mk so that config.mk can be included 
+#  before the CPPSRCS are defined)
+#
+ifneq ($(CPPSRCS)$(CMMSRCS),)
+CPP_PROG_LINK		= 1
+endif
+
+#
+# Make sure to wrap static libs inside linker specific flags to turn on & off
+# inclusion of all symbols inside the static libs
+#
+ifndef NO_LD_ARCHIVE_FLAGS
+ifdef SHARED_LIBRARY_LIBS
+EXTRA_DSO_LDOPTS := $(MKSHLIB_FORCE_ALL) $(SHARED_LIBRARY_LIBS) $(MKSHLIB_UNFORCE_ALL) $(EXTRA_DSO_LDOPTS)
+endif
+endif
+
+#
+# This will strip out symbols that the component should not be 
+# exporting from the .dynsym section.
+#
+ifdef IS_COMPONENT
+EXTRA_DSO_LDOPTS += $(MOZ_COMPONENTS_VERSION_SCRIPT_LDFLAGS)
+endif # IS_COMPONENT
+
+#
+# Enforce the requirement that MODULE_NAME must be set 
+# for components in static builds
+#
+ifdef IS_COMPONENT
+ifdef EXPORT_LIBRARY
+ifndef FORCE_SHARED_LIB
+ifndef MODULE_NAME
+$(error MODULE_NAME is required for components which may be used in static builds)
+endif
+endif
+endif
+endif
+
+#
+# MacOS X specific stuff
+#
+
+ifeq ($(OS_ARCH),Darwin)
+ifdef SHARED_LIBRARY
+ifdef IS_COMPONENT
+EXTRA_DSO_LDOPTS	+= -bundle
+else
+EXTRA_DSO_LDOPTS	+= -dynamiclib -install_name @executable_path/$(SHARED_LIBRARY) -compatibility_version 1 -current_version 1 -single_module
+endif
+endif
+endif
+
+#
+# On NetBSD a.out systems, use -Bsymbolic.  This fixes what would otherwise be
+# fatal symbol name clashes between components.
+#
+ifeq ($(OS_ARCH),NetBSD)
+ifeq ($(DLL_SUFFIX),.so.1.0)
+ifdef IS_COMPONENT
+EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic
+endif
+endif
+endif
+
+ifeq ($(OS_ARCH),FreeBSD)
+ifdef IS_COMPONENT
+EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic
+endif
+endif
+
+ifeq ($(OS_ARCH),NetBSD)
+ifneq (,$(filter arc cobalt hpcmips mipsco newsmips pmax sgimips,$(OS_TEST)))
+ifeq ($(MODULE),layout)
+OS_CFLAGS += -Wa,-xgot
+OS_CXXFLAGS += -Wa,-xgot
+endif
+endif
+endif
+
+ifeq ($(OS_ARCH),Linux)
+ifneq (,$(filter mips mipsel,$(OS_TEST)))
+ifeq ($(MODULE),layout)
+OS_CFLAGS += -Wa,-xgot
+OS_CXXFLAGS += -Wa,-xgot
+endif
+endif
+endif
+
+#
+# HP-UXBeOS specific section: for COMPONENTS only, add -Bsymbolic flag
+# which uses internal symbols first
+#
+ifeq ($(OS_ARCH),HP-UX)
+ifdef IS_COMPONENT
+ifeq ($(GNU_CC)$(GNU_CXX),)
+EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic
+ifneq ($(HAS_EXTRAEXPORTS),1)
+MKSHLIB  += -Wl,+eNSGetModule -Wl,+eerrno
+MKCSHLIB += +eNSGetModule +eerrno
+ifneq ($(OS_TEST),ia64)
+MKSHLIB  += -Wl,+e_shlInit
+MKCSHLIB += +e_shlInit
+endif # !ia64
+endif # !HAS_EXTRAEXPORTS
+endif # non-gnu compilers
+endif # IS_COMPONENT
+endif # HP-UX
+
+ifeq ($(OS_ARCH),AIX)
+ifdef IS_COMPONENT
+ifneq ($(HAS_EXTRAEXPORTS),1)
+MKSHLIB += -bE:$(MOZILLA_DIR)/build/unix/aix.exp -bnoexpall
+MKCSHLIB += -bE:$(MOZILLA_DIR)/build/unix/aix.exp -bnoexpall
+endif # HAS_EXTRAEXPORTS
+endif # IS_COMPONENT
+endif # AIX
+
+#
+# OSF1: add -B symbolic flag for components
+#
+ifeq ($(OS_ARCH),OSF1)
+ifdef IS_COMPONENT
+ifeq ($(GNU_CC)$(GNU_CXX),)
+EXTRA_DSO_LDOPTS += -B symbolic
+endif  
+endif  
+endif
+
+#
+# Linux: add -Bsymbolic flag for components
+# 
+ifeq ($(OS_ARCH),Linux)
+ifdef IS_COMPONENT
+EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic
+endif
+endif 
+
+#
+# MINGW32
+#
+ifeq ($(OS_ARCH),WINNT)
+ifdef GNU_CC
+ifndef IS_COMPONENT
+DSO_LDOPTS += -Wl,--out-implib -Wl,$(IMPORT_LIBRARY)
+endif
+endif
+endif
+
+ifeq ($(USE_TVFS),1)
+IFLAGS1 = -rb
+IFLAGS2 = -rb
+else
+IFLAGS1 = -m 644
+IFLAGS2 = -m 755
+endif
+
+ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH))
+OUTOPTION = -Fo# eol
+else
+OUTOPTION = -o # eol
+endif # WINNT && !GNU_CC
+ifneq (,$(filter WINCE,$(OS_ARCH)))
+OUTOPTION = -Fo# eol
+endif
+
+ifeq ($(OS_TARGET), WINCE)
+OUTOPTION = -Fo# eol
+HOST_OUTOPTION = -Fo# eol
+else
+
+ifeq (,$(CROSS_COMPILE))
+HOST_OUTOPTION = $(OUTOPTION)
+else
+HOST_OUTOPTION = -o # eol
+endif
+
+endif
+################################################################################
+
+# SUBMAKEFILES: List of Makefiles for next level down.
+#   This is used to update or create the Makefiles before invoking them.
+SUBMAKEFILES += $(addsuffix /Makefile, $(DIRS) $(TOOL_DIRS) $(PARALLEL_DIRS))
+
+# The root makefile doesn't want to do a plain export/libs, because
+# of the tiers and because of libxul. Suppress the default rules in favor
+# of something else. Makefiles which use this var *must* provide a sensible
+# default rule before including rules.mk
+ifndef SUPPRESS_DEFAULT_RULES
+ifdef TIERS
+
+DIRS += $(foreach tier,$(TIERS),$(tier_$(tier)_dirs))
+STATIC_DIRS += $(foreach tier,$(TIERS),$(tier_$(tier)_staticdirs))
+
+default all alldep::
+	$(EXIT_ON_ERROR) \
+	$(foreach tier,$(TIERS),$(MAKE) tier_$(tier); ) true
+
+else
+
+default all::
+	@$(EXIT_ON_ERROR) \
+	$(foreach dir,$(STATIC_DIRS),$(MAKE) -C $(dir); ) true
+	$(MAKE) export
+	$(MAKE) libs
+	$(MAKE) tools
+
+# Do depend as well
+alldep:: 
+	$(MAKE) export
+	$(MAKE) depend
+	$(MAKE) libs
+	$(MAKE) tools
+
+endif # TIERS
+endif # SUPPRESS_DEFAULT_RULES
+
+ifeq ($(filter s,$(MAKEFLAGS)),)
+ECHO := echo
+QUIET :=
+else
+ECHO := true
+QUIET := -q
+endif
+
+MAKE_TIER_SUBMAKEFILES = +$(if $(tier_$*_dirs),$(MAKE) $(addsuffix /Makefile,$(tier_$*_dirs)))
+
+export_tier_%: 
+	@$(ECHO) "$@"
+	@$(MAKE_TIER_SUBMAKEFILES)
+	@$(EXIT_ON_ERROR) \
+	$(foreach dir,$(tier_$*_dirs),$(MAKE) -C $(dir) export; ) true
+
+libs_tier_%:
+	@$(ECHO) "$@"
+	@$(MAKE_TIER_SUBMAKEFILES)
+	@$(EXIT_ON_ERROR) \
+	$(foreach dir,$(tier_$*_dirs),$(MAKE) -C $(dir) libs; ) true
+
+tools_tier_%:
+	@$(ECHO) "$@"
+	@$(MAKE_TIER_SUBMAKEFILES)
+	@$(EXIT_ON_ERROR) \
+	$(foreach dir,$(tier_$*_dirs),$(MAKE) -C $(dir) tools; ) true
+
+$(foreach tier,$(TIERS),tier_$(tier))::
+	@$(ECHO) "$@: $($@_staticdirs) $($@_dirs)"
+	@$(EXIT_ON_ERROR) \
+	$(foreach dir,$($@_staticdirs),$(MAKE) -C $(dir); ) true
+	$(MAKE) export_$@
+	$(MAKE) libs_$@
+
+# Do everything from scratch
+everything::
+	$(MAKE) clean
+	$(MAKE) alldep
+
+# Add dummy depend target for tinderboxes
+depend::
+
+ifdef ALL_PLATFORMS
+all_platforms:: $(NFSPWD)
+	@d=`$(NFSPWD)`;							\
+	if test ! -d LOGS; then rm -rf LOGS; mkdir LOGS; else true; fi;	\
+	for h in $(PLATFORM_HOSTS); do					\
+		echo "On $$h: $(MAKE) $(ALL_PLATFORMS) >& LOGS/$$h.log";\
+		rsh $$h -n "(chdir $$d;					\
+			     $(MAKE) $(ALL_PLATFORMS) >& LOGS/$$h.log;	\
+			     echo DONE) &" 2>&1 > LOGS/$$h.pid &	\
+		sleep 1;						\
+	done
+
+$(NFSPWD):
+	cd $(@D); $(MAKE) $(@F)
+endif
+
+# Target to only regenerate makefiles
+makefiles: $(SUBMAKEFILES)
+ifneq (,$(DIRS)$(TOOL_DIRS)$(PARALLEL_DIRS))
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+	+$(LOOP_OVER_TOOL_DIRS)
+endif
+
+ifdef PARALLEL_DIRS
+export:: $(PARALLEL_DIRS_export)
+
+$(PARALLEL_DIRS_export): %_export: %/Makefile
+	+@$(UPDATE_TITLE_export) $(MAKE) -C $* export
+endif
+
+export:: $(SUBMAKEFILES) $(MAKE_DIRS) $(if $(EXPORTS)$(XPIDLSRCS)$(SDK_HEADERS)$(SDK_XPIDLSRCS),$(PUBLIC)) $(if $(SDK_HEADERS)$(SDK_XPIDLSRCS),$(SDK_PUBLIC)) $(if $(XPIDLSRCS),$(IDL_DIR)) $(if $(SDK_XPIDLSRCS),$(SDK_IDL_DIR))
+	+$(LOOP_OVER_DIRS)
+	+$(LOOP_OVER_TOOL_DIRS)
+
+ifdef PARALLEL_DIRS
+tools:: $(PARALLEL_DIRS_tools)
+
+$(PARALLEL_DIRS_tools): %_tools: %/Makefile
+	+@$(UPDATE_TITLE_tools) $(MAKE) -C $* tools
+endif
+
+tools:: $(SUBMAKEFILES) $(MAKE_DIRS)
+	+$(LOOP_OVER_DIRS)
+ifdef TOOL_DIRS
+	@$(EXIT_ON_ERROR) \
+	$(foreach dir,$(TOOL_DIRS),$(UPDATE_TITLE) $(MAKE) -C $(dir) libs; ) true
+endif
+
+#
+# Rule to create list of libraries for final link
+#
+export::
+ifdef LIBRARY_NAME
+ifdef EXPORT_LIBRARY
+ifdef IS_COMPONENT
+ifdef BUILD_STATIC_LIBS
+	@$(PERL) -I$(MOZILLA_DIR)/config $(MOZILLA_DIR)/config/build-list.pl $(FINAL_LINK_COMPS) $(LIBRARY_NAME)
+ifdef MODULE_NAME
+	@$(PERL) -I$(MOZILLA_DIR)/config $(MOZILLA_DIR)/config/build-list.pl $(FINAL_LINK_COMP_NAMES) $(MODULE_NAME)
+endif
+endif
+else
+	$(PERL) -I$(MOZILLA_DIR)/config $(MOZILLA_DIR)/config/build-list.pl $(FINAL_LINK_LIBS) $(LIBRARY_NAME)
+endif # IS_COMPONENT
+endif # EXPORT_LIBRARY
+endif # LIBRARY_NAME
+
+# Create dependencies on static (and shared EXTRA_DSO_LIBS) libraries
+LIBS_DEPS = $(filter %.$(LIB_SUFFIX), $(LIBS))
+HOST_LIBS_DEPS = $(filter %.$(LIB_SUFFIX), $(HOST_LIBS))
+DSO_LDOPTS_DEPS = $(EXTRA_DSO_LIBS) $(filter %.$(LIB_SUFFIX), $(EXTRA_DSO_LDOPTS))
+
+##############################################
+ifdef PARALLEL_DIRS
+libs:: $(PARALLEL_DIRS_libs)
+
+$(PARALLEL_DIRS_libs): %_libs: %/Makefile
+	+@$(UPDATE_TITLE_libs) $(MAKE) -C $* libs
+endif
+
+libs:: $(SUBMAKEFILES) $(MAKE_DIRS) $(HOST_LIBRARY) $(LIBRARY) $(SHARED_LIBRARY) $(IMPORT_LIBRARY) $(HOST_PROGRAM) $(PROGRAM) $(HOST_SIMPLE_PROGRAMS) $(SIMPLE_PROGRAMS) $(JAVA_LIBRARY)
+ifndef NO_DIST_INSTALL
+ifdef LIBRARY
+ifdef EXPORT_LIBRARY # Stage libs that will be linked into a static build
+ifdef IS_COMPONENT
+	$(INSTALL) $(IFLAGS1) $(LIBRARY) $(DEPTH)/staticlib/components
+else
+	$(INSTALL) $(IFLAGS1) $(LIBRARY) $(DEPTH)/staticlib
+endif
+endif # EXPORT_LIBRARY
+ifdef DIST_INSTALL
+ifdef IS_COMPONENT
+	$(error Shipping static component libs makes no sense.)
+else
+	$(INSTALL) $(IFLAGS1) $(LIBRARY) $(DIST)/lib
+endif
+endif # DIST_INSTALL
+endif # LIBRARY
+ifdef SHARED_LIBRARY
+ifdef IS_COMPONENT
+	$(INSTALL) $(IFLAGS2) $(SHARED_LIBRARY) $(FINAL_TARGET)/components
+	$(ELF_DYNSTR_GC) $(FINAL_TARGET)/components/$(SHARED_LIBRARY)
+ifdef BEOS_ADDON_WORKAROUND
+	( cd $(FINAL_TARGET)/components && $(CC) -nostart -o $(SHARED_LIBRARY).stub $(SHARED_LIBRARY) )
+endif
+else # ! IS_COMPONENT
+ifneq (,$(filter OS2 WINNT WINCE,$(OS_ARCH)))
+	$(INSTALL) $(IFLAGS2) $(IMPORT_LIBRARY) $(DIST)/lib
+else
+	$(INSTALL) $(IFLAGS2) $(SHARED_LIBRARY) $(DIST)/lib
+endif
+	$(INSTALL) $(IFLAGS2) $(SHARED_LIBRARY) $(FINAL_TARGET)
+ifdef BEOS_ADDON_WORKAROUND
+	( cd $(FINAL_TARGET) && $(CC) -nostart -o $(SHARED_LIBRARY).stub $(SHARED_LIBRARY) )
+endif
+endif # IS_COMPONENT
+endif # SHARED_LIBRARY
+ifdef PROGRAM
+	$(INSTALL) $(IFLAGS2) $(PROGRAM) $(FINAL_TARGET)
+endif
+ifdef SIMPLE_PROGRAMS
+	$(INSTALL) $(IFLAGS2) $(SIMPLE_PROGRAMS) $(FINAL_TARGET)
+endif
+ifdef HOST_PROGRAM
+	$(INSTALL) $(IFLAGS2) $(HOST_PROGRAM) $(DIST)/host/bin
+endif
+ifdef HOST_SIMPLE_PROGRAMS
+	$(INSTALL) $(IFLAGS2) $(HOST_SIMPLE_PROGRAMS) $(DIST)/host/bin
+endif
+ifdef HOST_LIBRARY
+	$(INSTALL) $(IFLAGS1) $(HOST_LIBRARY) $(DIST)/host/lib
+endif
+ifdef JAVA_LIBRARY
+ifdef IS_COMPONENT
+	$(INSTALL) $(IFLAGS1) $(JAVA_LIBRARY) $(FINAL_TARGET)/components
+else
+	$(INSTALL) $(IFLAGS1) $(JAVA_LIBRARY) $(FINAL_TARGET)
+endif
+endif # JAVA_LIBRARY
+endif # !NO_DIST_INSTALL
+	+$(LOOP_OVER_DIRS)
+
+##############################################
+
+ifndef NO_PROFILE_GUIDED_OPTIMIZE
+ifneq (,$(MOZ_PROFILE_GENERATE)$(MOZ_PROFILE_USE))
+ifeq ($(OS_ARCH)_$(GNU_CC)$(INTERNAL_TOOLS), WINNT_)
+# Force re-linking when building with PGO, since
+# the MSVC linker does all the work.  We force re-link
+# in both stages so you can do depend builds with PGO.
+ifdef SHARED_LIBRARY
+$(SHARED_LIBRARY): FORCE
+BINARY_BASENAME = $(SHARED_LIBRARY:$(DLL_SUFFIX)=)
+endif
+ifdef PROGRAM
+$(PROGRAM): FORCE
+BINARY_BASENAME = $(PROGRAM:$(BIN_SUFFIX)=)
+endif
+
+ifdef MOZ_PROFILE_USE
+# In the second pass, we need to merge the pgc files into the pgd file.
+# The compiler would do this for us automatically if they were in the right
+# place, but they're in dist/bin.
+ifdef BINARY_BASENAME
+export::
+	$(PYTHON) $(topsrcdir)/build/win32/pgomerge.py \
+	  $(BINARY_BASENAME) $(DIST)/bin
+endif
+endif # MOZ_PROFILE_USE
+endif # WINNT_
+endif # MOZ_PROFILE_GENERATE || MOZ_PROFILE_USE
+endif # NO_PROFILE_GUIDED_OPTIMIZE
+
+##############################################
+
+checkout:
+	$(MAKE) -C $(topsrcdir) -f client.mk checkout
+
+run_viewer: $(FINAL_TARGET)/viewer
+	cd $(FINAL_TARGET); \
+	MOZILLA_FIVE_HOME=`pwd` \
+	LD_LIBRARY_PATH=".:$(LIBS_PATH):$$LD_LIBRARY_PATH" \
+	viewer
+
+clean clobber realclean clobber_all:: $(SUBMAKEFILES)
+	-rm -f $(ALL_TRASH)
+	-rm -rf $(ALL_TRASH_DIRS)
+	+-$(LOOP_OVER_PARALLEL_DIRS)
+	+-$(LOOP_OVER_DIRS)
+	+-$(LOOP_OVER_STATIC_DIRS)
+	+-$(LOOP_OVER_TOOL_DIRS)
+
+distclean:: $(SUBMAKEFILES)
+	+-$(LOOP_OVER_PARALLEL_DIRS)
+	+-$(LOOP_OVER_DIRS)
+	+-$(LOOP_OVER_STATIC_DIRS)
+	+-$(LOOP_OVER_TOOL_DIRS)
+	-rm -rf $(ALL_TRASH_DIRS) 
+	-rm -f $(ALL_TRASH)  \
+	Makefile .HSancillary \
+	$(wildcard *.$(OBJ_SUFFIX)) $(wildcard *.ho) $(wildcard host_*.o*) \
+	$(wildcard *.$(LIB_SUFFIX)) $(wildcard *$(DLL_SUFFIX)) \
+	$(wildcard *.$(IMPORT_LIB_SUFFIX))
+ifeq ($(OS_ARCH),OS2)
+	-rm -f $(PROGRAM:.exe=.map)
+endif
+
+alltags:
+	rm -f TAGS
+	find $(topsrcdir) -name dist -prune -o \( -name '*.[hc]' -o -name '*.cp' -o -name '*.cpp' -o -name '*.idl' \) -print | $(TAG_PROGRAM)
+
+#
+# PROGRAM = Foo
+# creates OBJS, links with LIBS to create Foo
+#
+$(PROGRAM): $(PROGOBJS) $(LIBS_DEPS) $(EXTRA_DEPS) $(EXE_DEF_FILE) $(RESFILE) Makefile Makefile.in
+ifeq (WINCE,$(OS_ARCH))
+	$(LD) -NOLOGO -OUT:$@ $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(PROGOBJS) $(RESFILE) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS)
+else
+ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH))
+	$(LD) -NOLOGO -OUT:$@ -PDB:$(LINK_PDBFILE) $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(PROGOBJS) $(RESFILE) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS)
+ifdef MSMANIFEST_TOOL
+	@if test -f $@.manifest; then \
+		if test -f "$(srcdir)/$@.manifest"; then \
+			mt.exe -NOLOGO -MANIFEST "$(win_srcdir)/$@.manifest" $@.manifest -OUTPUTRESOURCE:$@\;1; \
+		else \
+			mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \
+		fi; \
+		rm -f $@.manifest; \
+	fi
+endif	# MSVC with manifest tool
+else
+ifeq ($(CPP_PROG_LINK),1)
+	$(CCC) -o $@ $(CXXFLAGS) $(WRAP_MALLOC_CFLAGS) $(PROGOBJS) $(RESFILE) $(WIN32_EXE_LDFLAGS) $(SOLARIS_JEMALLOC_LDFLAGS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) $(BIN_FLAGS) $(WRAP_MALLOC_LIB) $(PROFILER_LIBS) $(EXE_DEF_FILE)
+else # ! CPP_PROG_LINK
+	$(CC) -o $@ $(CFLAGS) $(PROGOBJS) $(RESFILE) $(WIN32_EXE_LDFLAGS) $(SOLARIS_JEMALLOC_LDFLAGS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) $(BIN_FLAGS) $(EXE_DEF_FILE)
+endif # CPP_PROG_LINK
+endif # WINNT && !GNU_CC
+endif # WINCE
+
+ifdef ENABLE_STRIP
+	$(STRIP) $@
+endif
+ifdef MOZ_POST_PROGRAM_COMMAND
+	$(MOZ_POST_PROGRAM_COMMAND) $@
+endif
+ifeq ($(OS_ARCH),BeOS)
+ifdef BEOS_PROGRAM_RESOURCE
+	xres -o $@ $(BEOS_PROGRAM_RESOURCE)
+	mimeset $@
+endif
+endif # BeOS
+
+$(HOST_PROGRAM): $(HOST_PROGOBJS) $(HOST_LIBS_DEPS) $(HOST_EXTRA_DEPS) Makefile Makefile.in
+ifeq (WINCE,$(OS_ARCH))
+	$(HOST_LD) -NOLOGO -OUT:$@ $(HOST_OBJS) $(WIN32_EXE_LDFLAGS) $(HOST_LIBS) $(HOST_EXTRA_LIBS)
+else
+ifeq (_WINNT,$(GNU_CC)_$(HOST_OS_ARCH))
+	$(HOST_LD) -NOLOGO -OUT:$@ -PDB:$(HOST_PDBFILE) $(HOST_OBJS) $(WIN32_EXE_LDFLAGS) $(HOST_LIBS) $(HOST_EXTRA_LIBS)
+ifdef MSMANIFEST_TOOL
+	@if test -f $@.manifest; then \
+		mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \
+		rm -f $@.manifest; \
+	fi
+endif	# MSVC with manifest tool
+else
+ifeq ($(CPP_PROG_LINK),1)
+	$(HOST_CXX) -o $@ $(HOST_CXXFLAGS) $(HOST_LDFLAGS) $(HOST_PROGOBJS) $(HOST_LIBS) $(HOST_EXTRA_LIBS)
+else
+	$(HOST_CC) -o $@ $(HOST_CFLAGS) $(HOST_LDFLAGS) $(HOST_PROGOBJS) $(HOST_LIBS) $(HOST_EXTRA_LIBS)
+endif # CPP_PROG_LINK
+endif
+endif
+
+#
+# This is an attempt to support generation of multiple binaries
+# in one directory, it assumes everything to compile Foo is in
+# Foo.o (from either Foo.c or Foo.cpp).
+#
+# SIMPLE_PROGRAMS = Foo Bar
+# creates Foo.o Bar.o, links with LIBS to create Foo, Bar.
+#
+$(SIMPLE_PROGRAMS): %$(BIN_SUFFIX): %.$(OBJ_SUFFIX) $(LIBS_DEPS) $(EXTRA_DEPS) Makefile Makefile.in
+ifeq (WINCE,$(OS_ARCH))
+	$(LD) -nologo  -entry:main -out:$@ $< $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS)
+else
+ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH))
+	$(LD) -nologo -out:$@ -pdb:$(LINK_PDBFILE) $< $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS)
+ifdef MSMANIFEST_TOOL
+	@if test -f $@.manifest; then \
+		mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \
+		rm -f $@.manifest; \
+	fi
+endif	# MSVC with manifest tool
+else
+ifeq ($(CPP_PROG_LINK),1)
+	$(CCC) $(WRAP_MALLOC_CFLAGS) $(CXXFLAGS) -o $@ $< $(WIN32_EXE_LDFLAGS) $(SOLARIS_JEMALLOC_LDFLAGS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) $(WRAP_MALLOC_LIB) $(PROFILER_LIBS) $(BIN_FLAGS)
+else
+	$(CC) $(WRAP_MALLOC_CFLAGS) $(CFLAGS) $(OUTOPTION)$@ $< $(WIN32_EXE_LDFLAGS) $(SOLARIS_JEMALLOC_LDFLAGS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS) $(WRAP_MALLOC_LIB) $(PROFILER_LIBS) $(BIN_FLAGS)
+endif # CPP_PROG_LINK
+endif # WINNT && !GNU_CC
+endif # WINCE
+
+ifdef ENABLE_STRIP
+	$(STRIP) $@
+endif
+ifdef MOZ_POST_PROGRAM_COMMAND
+	$(MOZ_POST_PROGRAM_COMMAND) $@
+endif
+
+$(HOST_SIMPLE_PROGRAMS): host_%$(HOST_BIN_SUFFIX): host_%.$(OBJ_SUFFIX) $(HOST_LIBS_DEPS) $(HOST_EXTRA_DEPS) Makefile Makefile.in
+ifeq (WINCE,$(OS_ARCH))
+	$(HOST_LD) -NOLOGO -OUT:$@ $(WIN32_EXE_LDFLAGS) $< $(HOST_LIBS) $(HOST_EXTRA_LIBS)
+else
+ifeq (WINNT_,$(HOST_OS_ARCH)_$(GNU_CC))
+	$(HOST_LD) -NOLOGO -OUT:$@ -PDB:$(HOST_PDBFILE) $< $(WIN32_EXE_LDFLAGS) $(HOST_LIBS) $(HOST_EXTRA_LIBS)
+else
+ifneq (,$(HOST_CPPSRCS)$(USE_HOST_CXX))
+	$(HOST_CXX) $(HOST_OUTOPTION)$@ $(HOST_CXXFLAGS) $(INCLUDES) $< $(HOST_LIBS) $(HOST_EXTRA_LIBS)
+else
+	$(HOST_CC) $(HOST_OUTOPTION)$@ $(HOST_CFLAGS) $(INCLUDES) $< $(HOST_LIBS) $(HOST_EXTRA_LIBS)
+endif
+endif
+endif
+
+#
+# Purify target.  Solaris/sparc only to start.
+# Purify does not recognize "egcs" or "c++" so we go with 
+# "gcc" and "g++" for now.
+#
+pure:	$(PROGRAM)
+ifeq ($(CPP_PROG_LINK),1)
+	$(PURIFY) $(CCC) -o $^.pure $(CXXFLAGS) $(PROGOBJS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS)
+else
+	$(PURIFY) $(CC) -o $^.pure $(CFLAGS) $(PROGOBJS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS)
+endif
+ifndef NO_DIST_INSTALL
+	$(INSTALL) $(IFLAGS2) $^.pure $(FINAL_TARGET)
+endif
+
+quantify: $(PROGRAM)
+ifeq ($(CPP_PROG_LINK),1)
+	$(QUANTIFY) $(CCC) -o $^.quantify $(CXXFLAGS) $(PROGOBJS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS)
+else
+	$(QUANTIFY) $(CC) -o $^.quantify $(CFLAGS) $(PROGOBJS) $(LDFLAGS) $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(EXTRA_LIBS)
+endif
+ifndef NO_DIST_INSTALL
+	$(INSTALL) $(IFLAGS2) $^.quantify $(FINAL_TARGET)
+endif
+
+#
+# This allows us to create static versions of the shared libraries
+# that are built using other static libraries.  Confused...?
+#
+ifdef SHARED_LIBRARY_LIBS
+ifeq (,$(GNU_LD)$(filter-out OS2 WINNT WINCE, $(OS_ARCH)))
+ifneq (,$(BUILD_STATIC_LIBS)$(FORCE_STATIC_LIB))
+LOBJS	+= $(SHARED_LIBRARY_LIBS)
+endif
+else
+ifneq (,$(filter OSF1 BSD_OS FreeBSD NetBSD OpenBSD SunOS Darwin,$(OS_ARCH)))
+CLEANUP1	:= | egrep -v '(________64ELEL_|__.SYMDEF)'
+CLEANUP2	:= rm -f ________64ELEL_ __.SYMDEF
+else
+CLEANUP2	:= true
+endif
+SUB_LOBJS	= $(shell for lib in $(SHARED_LIBRARY_LIBS); do $(AR_LIST) $${lib} $(CLEANUP1); done;)
+endif
+endif
+ifdef MOZILLA_PROBE_LIBS
+PROBE_LOBJS	= $(shell for lib in $(MOZILLA_PROBE_LIBS); do $(AR_LIST) $${lib} $(CLEANUP1); done;)
+endif
+ifdef DTRACE_PROBE_OBJ
+EXTRA_DEPS += $(DTRACE_PROBE_OBJ)
+endif
+
+$(LIBRARY): $(OBJS) $(LOBJS) $(SHARED_LIBRARY_LIBS) $(EXTRA_DEPS) Makefile Makefile.in
+	rm -f $@
+ifneq (,$(GNU_LD)$(filter-out OS2 WINNT WINCE, $(OS_ARCH)))
+ifdef SHARED_LIBRARY_LIBS
+	@rm -f $(SUB_LOBJS)
+	@for lib in $(SHARED_LIBRARY_LIBS); do $(AR_EXTRACT) $${lib}; $(CLEANUP2); done
+endif
+endif
+	$(AR) $(AR_FLAGS) $(OBJS) $(LOBJS) $(SUB_LOBJS)
+	$(RANLIB) $@
+	@rm -f foodummyfilefoo $(SUB_LOBJS)
+
+ifeq (,$(filter-out WINNT WINCE, $(OS_ARCH)))
+$(IMPORT_LIBRARY): $(SHARED_LIBRARY)
+endif
+
+ifeq ($(OS_ARCH),OS2)
+$(DEF_FILE): $(OBJS) $(SHARED_LIBRARY_LIBS)
+	rm -f $@
+	echo LIBRARY $(LIBRARY_NAME) INITINSTANCE TERMINSTANCE > $@
+	echo PROTMODE >> $@
+	echo CODE    LOADONCALL MOVEABLE DISCARDABLE >> $@
+	echo DATA    PRELOAD MOVEABLE MULTIPLE NONSHARED >> $@
+	echo EXPORTS >> $@
+ifeq ($(IS_COMPONENT),1)
+ifeq ($(HAS_EXTRAEXPORTS),1)
+ifndef MOZ_OS2_USE_DECLSPEC
+	$(FILTER) $(OBJS) $(SHARED_LIBRARY_LIBS) >> $@
+endif	
+else
+	echo    _NSGetModule >> $@
+endif
+else
+ifndef MOZ_OS2_USE_DECLSPEC
+	$(FILTER) $(OBJS) $(SHARED_LIBRARY_LIBS) >> $@
+endif	
+endif
+	$(ADD_TO_DEF_FILE)
+
+ifdef MOZ_OS2_USE_DECLSPEC
+$(IMPORT_LIBRARY): $(SHARED_LIBRARY)
+else
+$(IMPORT_LIBRARY): $(DEF_FILE)
+endif
+	rm -f $@
+	$(IMPLIB) $@ $^
+	$(RANLIB) $@
+endif # OS/2
+
+$(HOST_LIBRARY): $(HOST_OBJS) Makefile
+	rm -f $@
+	$(HOST_AR) $(HOST_AR_FLAGS) $(HOST_OBJS)
+	$(HOST_RANLIB) $@
+
+ifdef NO_LD_ARCHIVE_FLAGS
+SUB_SHLOBJS = $(SUB_LOBJS)
+endif
+
+ifdef HAVE_DTRACE
+ifndef XP_MACOSX
+ifdef DTRACE_PROBE_OBJ
+ifndef DTRACE_LIB_DEPENDENT
+$(DTRACE_PROBE_OBJ): $(OBJS)
+	dtrace -G -C -32 -s $(MOZILLA_DTRACE_SRC) -o $(DTRACE_PROBE_OBJ) $(OBJS)
+endif
+endif
+endif
+endif
+
+# On Darwin (Mac OS X), dwarf2 debugging uses debug info left in .o files,
+# so instead of deleting .o files after repacking them into a dylib, we make
+# symlinks back to the originals. The symlinks are a no-op for stabs debugging,
+# so no need to conditionalize on OS version or debugging format.
+
+$(SHARED_LIBRARY): $(OBJS) $(LOBJS) $(DEF_FILE) $(RESFILE) $(SHARED_LIBRARY_LIBS) $(EXTRA_DEPS) $(DSO_LDOPTS_DEPS) Makefile Makefile.in
+ifndef INCREMENTAL_LINKER
+	rm -f $@
+endif
+ifeq ($(OS_ARCH),OpenVMS)
+	@if test ! -f $(VMS_SYMVEC_FILE); then \
+	  if test -f $(VMS_SYMVEC_FILE_MODULE); then \
+	    echo Creating specific component options file $(VMS_SYMVEC_FILE); \
+	    cp $(VMS_SYMVEC_FILE_MODULE) $(VMS_SYMVEC_FILE); \
+	  fi; \
+	fi
+ifdef IS_COMPONENT
+	@if test ! -f $(VMS_SYMVEC_FILE); then \
+	  echo Creating generic component options file $(VMS_SYMVEC_FILE); \
+	  cp $(VMS_SYMVEC_FILE_COMP) $(VMS_SYMVEC_FILE); \
+	fi
+endif
+endif # OpenVMS
+ifdef NO_LD_ARCHIVE_FLAGS
+ifdef SHARED_LIBRARY_LIBS
+	@rm -f $(SUB_SHLOBJS)
+	@for lib in $(SHARED_LIBRARY_LIBS); do $(AR_EXTRACT) $${lib}; $(CLEANUP2); done
+ifeq ($(OS_ARCH),Darwin)
+	@echo Making symlinks to the original object files in the archive libraries $(SHARED_LIBRARY_LIBS)
+	@for lib in $(SHARED_LIBRARY_LIBS); do \
+		libdir=`echo $$lib|sed -e 's,/[^/]*\.a,,'`; \
+		ofiles=`$(AR_LIST) $${lib}`; \
+		for ofile in $$ofiles; do \
+			if [ -f $$libdir/$$ofile ]; then \
+				rm -f $$ofile; \
+				ln -s $$libdir/$$ofile $$ofile; \
+			fi; \
+		done; \
+	done
+endif
+endif # SHARED_LIBRARY_LIBS
+endif # NO_LD_ARCHIVE_FLAGS
+ifdef DTRACE_LIB_DEPENDENT
+	@rm -f $(PROBE_LOBJS)
+	@for lib in $(MOZILLA_PROBE_LIBS); do $(AR_EXTRACT) $${lib}; $(CLEANUP2); done
+ifndef XP_MACOSX
+	dtrace -G -C -32 -s $(MOZILLA_DTRACE_SRC) -o  $(DTRACE_PROBE_OBJ) $(PROBE_LOBJS)
+endif
+	@for lib in $(MOZILLA_PROBE_LIBS); do \
+		ofiles=`$(AR_LIST) $${lib}`; \
+		$(AR_DELETE) $${lib} $$ofiles; \
+	done
+	$(MKSHLIB) $(SHLIB_LDSTARTFILE) $(OBJS) $(LOBJS) $(SUB_SHLOBJS) $(DTRACE_PROBE_OBJ) $(PROBE_LOBJS) $(RESFILE) $(LDFLAGS) $(EXTRA_DSO_LDOPTS) $(OS_LIBS) $(EXTRA_LIBS) $(DEF_FILE) $(SHLIB_LDENDFILE)
+	@rm -f $(PROBE_LOBJS)
+	@rm -f $(DTRACE_PROBE_OBJ)
+	@for lib in $(MOZILLA_PROBE_LIBS); do \
+		if [ -L $${lib} ]; then rm -f `readlink $${lib}`; fi; \
+	done
+	@rm -f $(MOZILLA_PROBE_LIBS)
+
+else # ! DTRACE_LIB_DEPENDENT
+	$(MKSHLIB) $(SHLIB_LDSTARTFILE) $(OBJS) $(DTRACE_PROBE_OBJ) $(LOBJS) $(SUB_SHLOBJS) $(RESFILE) $(LDFLAGS) $(EXTRA_DSO_LDOPTS) $(OS_LIBS) $(EXTRA_LIBS) $(DEF_FILE) $(SHLIB_LDENDFILE)
+endif # DTRACE_LIB_DEPENDENT
+
+ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH))
+ifdef MSMANIFEST_TOOL
+ifdef EMBED_MANIFEST_AT
+	@if test -f $@.manifest; then \
+		mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;$(EMBED_MANIFEST_AT); \
+		rm -f $@.manifest; \
+	fi
+endif   # EMBED_MANIFEST_AT
+endif	# MSVC with manifest tool
+endif	# WINNT && !GCC
+ifeq ($(OS_ARCH),Darwin)
+else # non-Darwin
+	@rm -f $(SUB_SHLOBJS)
+endif # Darwin
+	@rm -f foodummyfilefoo $(DELETE_AFTER_LINK)
+	chmod +x $@
+ifdef ENABLE_STRIP
+	$(STRIP) $@
+endif
+ifdef MOZ_POST_DSO_LIB_COMMAND
+	$(MOZ_POST_DSO_LIB_COMMAND) $@
+endif
+
+ifdef MOZ_AUTO_DEPS
+ifdef COMPILER_DEPEND
+ifeq (__SunOS,$(GNU_CC)_$(GNU_CXX)_$(OS_ARCH))
+_MDDEPFILE = $(MDDEPDIR)/$(@F).pp
+
+define MAKE_DEPS_AUTO_CC
+if test -d $(@D); then \
+	echo "Building deps for $< using Sun Studio cc"; \
+	$(CC) $(COMPILE_CFLAGS) -xM  $< >$(_MDDEPFILE) ; \
+fi
+endef
+define MAKE_DEPS_AUTO_CXX
+if test -d $(@D); then \
+	echo "Building deps for $< using Sun Studio CC"; \
+	$(CXX) $(COMPILE_CXXFLAGS) -xM $< >$(_MDDEPFILE) ; \
+fi
+endef
+endif # Sun Studio on Solaris
+else # COMPILER_DEPEND
+#
+# Generate dependencies on the fly
+#
+_MDDEPFILE = $(MDDEPDIR)/$(@F).pp
+
+define MAKE_DEPS_AUTO
+if test -d $(@D); then \
+	echo "Building deps for $<"; \
+	$(MKDEPEND) -o'.$(OBJ_SUFFIX)' -f- $(DEFINES) $(ACDEFINES) $(INCLUDES) $< 2>/dev/null | sed -e "s|^[^ ]*/||" > $(_MDDEPFILE) ; \
+fi
+endef
+
+MAKE_DEPS_AUTO_CC = $(MAKE_DEPS_AUTO)
+MAKE_DEPS_AUTO_CXX = $(MAKE_DEPS_AUTO)
+
+endif # COMPILER_DEPEND
+
+endif # MOZ_AUTO_DEPS
+
+ifdef MOZ_MEMORY
+ifeq ($(OS_ARCH),SunOS)
+SOLARIS_JEMALLOC_LDFLAGS = $(call EXPAND_LIBNAME_PATH,jemalloc,$(DIST)/lib)
+endif
+endif
+
+# Rules for building native targets must come first because of the host_ prefix
+host_%.$(OBJ_SUFFIX): %.c Makefile Makefile.in
+	$(REPORT_BUILD)
+	$(ELOG) $(HOST_CC) $(HOST_OUTOPTION)$@ -c $(HOST_CFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS)
+
+host_%.$(OBJ_SUFFIX): %.cpp Makefile Makefile.in
+	$(REPORT_BUILD)
+	$(ELOG) $(HOST_CXX) $(HOST_OUTOPTION)$@ -c $(HOST_CXXFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS)
+
+host_%.$(OBJ_SUFFIX): %.cc Makefile Makefile.in
+	$(REPORT_BUILD)
+	$(ELOG) $(HOST_CXX) $(HOST_OUTOPTION)$@ -c $(HOST_CXXFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS)
+
+host_%.$(OBJ_SUFFIX): %.m Makefile Makefile.in
+	$(REPORT_BUILD)
+	$(ELOG) $(HOST_CC) $(HOST_OUTOPTION)$@ -c $(HOST_CFLAGS) $(HOST_CMFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS)
+
+host_%.$(OBJ_SUFFIX): %.mm Makefile Makefile.in
+	$(REPORT_BUILD)
+	$(ELOG) $(HOST_CXX) $(HOST_OUTOPTION)$@ -c $(HOST_CXXFLAGS) $(HOST_CMMFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS)
+
+%: %.c Makefile Makefile.in
+	$(REPORT_BUILD)
+	@$(MAKE_DEPS_AUTO_CC)
+	$(ELOG) $(CC) $(CFLAGS) $(LDFLAGS) $(OUTOPTION)$@ $(_VPATH_SRCS)
+
+%.$(OBJ_SUFFIX): %.c Makefile Makefile.in
+	$(REPORT_BUILD)
+	@$(MAKE_DEPS_AUTO_CC)
+	$(ELOG) $(CC) $(OUTOPTION)$@ -c $(COMPILE_CFLAGS) $(_VPATH_SRCS)
+
+moc_%.cpp: %.h Makefile Makefile.in
+	$(MOC) $< $(OUTOPTION)$@ 
+
+ifdef ASFILES
+# The AS_DASH_C_FLAG is needed cause not all assemblers (Solaris) accept
+# a '-c' flag.
+%.$(OBJ_SUFFIX): %.$(ASM_SUFFIX) Makefile Makefile.in
+	$(AS) -o $@ $(ASFLAGS) $(AS_DASH_C_FLAG) $(_VPATH_SRCS)
+endif
+
+%.$(OBJ_SUFFIX): %.S Makefile Makefile.in
+	$(AS) -o $@ $(ASFLAGS) -c $<
+
+%: %.cpp Makefile Makefile.in
+	@$(MAKE_DEPS_AUTO_CXX)
+	$(CCC) $(OUTOPTION)$@ $(CXXFLAGS) $(_VPATH_SRCS) $(LDFLAGS)
+
+#
+# Please keep the next two rules in sync.
+#
+%.$(OBJ_SUFFIX): %.cc Makefile Makefile.in
+	$(REPORT_BUILD)
+	@$(MAKE_DEPS_AUTO_CXX)
+	$(ELOG) $(CCC) $(OUTOPTION)$@ -c $(COMPILE_CXXFLAGS) $(_VPATH_SRCS)
+
+%.$(OBJ_SUFFIX): %.cpp Makefile Makefile.in
+	$(REPORT_BUILD)
+	@$(MAKE_DEPS_AUTO_CXX)
+ifdef STRICT_CPLUSPLUS_SUFFIX
+	echo "#line 1 \"$*.cpp\"" | cat - $*.cpp > t_$*.cc
+	$(ELOG) $(CCC) -o $@ -c $(COMPILE_CXXFLAGS) t_$*.cc
+	rm -f t_$*.cc
+else
+	$(ELOG) $(CCC) $(OUTOPTION)$@ -c $(COMPILE_CXXFLAGS) $(_VPATH_SRCS)
+endif #STRICT_CPLUSPLUS_SUFFIX
+
+$(OBJ_PREFIX)%.$(OBJ_SUFFIX): %.mm Makefile Makefile.in
+	$(REPORT_BUILD)
+	@$(MAKE_DEPS_AUTO_CXX)
+	$(ELOG) $(CCC) -o $@ -c $(COMPILE_CXXFLAGS) $(COMPILE_CMMFLAGS) $(_VPATH_SRCS)
+
+$(OBJ_PREFIX)%.$(OBJ_SUFFIX): %.m Makefile Makefile.in
+	$(REPORT_BUILD)
+	@$(MAKE_DEPS_AUTO_CC)
+	$(ELOG) $(CC) -o $@ -c $(COMPILE_CFLAGS) $(COMPILE_CMFLAGS) $(_VPATH_SRCS)
+
+%.s: %.cpp
+	$(CCC) -S $(COMPILE_CXXFLAGS) $(_VPATH_SRCS)
+
+%.s: %.cc
+	$(CCC) -S $(COMPILE_CXXFLAGS) $(_VPATH_SRCS)
+
+%.s: %.c
+	$(CC) -S $(COMPILE_CFLAGS) $(_VPATH_SRCS)
+
+%.i: %.cpp
+	$(CCC) -C -E $(COMPILE_CXXFLAGS) $(_VPATH_SRCS) > $*.i
+
+%.i: %.cc
+	$(CCC) -C -E $(COMPILE_CXXFLAGS) $(_VPATH_SRCS) > $*.i
+
+%.i: %.c
+	$(CC) -C -E $(COMPILE_CFLAGS) $(_VPATH_SRCS) > $*.i
+
+%.i: %.mm
+	$(CCC) -C -E $(COMPILE_CXXFLAGS) $(COMPILE_CMMFLAGS) $(_VPATH_SRCS) > $*.i
+
+%.res: %.rc
+	@echo Creating Resource file: $@
+ifeq ($(OS_ARCH),OS2)
+	$(RC) $(RCFLAGS:-D%=-d %) -i $(subst /,\,$(srcdir)) -r $< $@
+else
+ifdef GNU_CC
+	$(RC) $(RCFLAGS) $(filter-out -U%,$(DEFINES)) $(INCLUDES:-I%=--include-dir %) $(OUTOPTION)$@ $(_VPATH_SRCS)
+else
+	$(RC) $(RCFLAGS) -r $(DEFINES) $(INCLUDES) $(OUTOPTION)$@ $(_VPATH_SRCS)
+endif
+endif
+
+# need 3 separate lines for OS/2
+%: %.pl
+	rm -f $@
+	cp $< $@
+	chmod +x $@
+
+%: %.sh
+	rm -f $@; cp $< $@; chmod +x $@
+
+# Cancel these implicit rules
+#
+%: %,v
+
+%: RCS/%,v
+
+%: s.%
+
+%: SCCS/s.%
+
+###############################################################################
+# Java rules
+###############################################################################
+ifneq (,$(filter OS2 WINNT WINCE,$(OS_ARCH)))
+SEP := ;
+else
+SEP := :
+endif
+
+EMPTY :=
+SPACE := $(EMPTY) $(EMPTY)
+
+# Cygwin and MSYS have their own special path form, but javac expects the source
+# and class paths to be in the DOS form (i.e. e:/builds/...).  This function
+# does the appropriate conversion on Windows, but is a noop on other systems.
+ifeq (,$(filter-out WINNT WINCE, $(HOST_OS_ARCH)))
+ifdef CYGWIN_WRAPPER
+normalizepath = $(foreach p,$(1),$(shell cygpath -m $(p)))
+else
+# assume MSYS
+#  We use 'pwd -W' to get DOS form of the path.  However, since the given path
+#  could be a file or a non-existent path, we cannot call 'pwd -W' directly
+#  on the path.  Instead, we extract the root path (i.e. "c:/"), call 'pwd -W'
+#  on it, then merge with the rest of the path.
+root-path = $(shell echo $(1) | sed -e "s|\(/[^/]*\)/\?\(.*\)|\1|")
+non-root-path = $(shell echo $(1) | sed -e "s|\(/[^/]*\)/\?\(.*\)|\2|")
+normalizepath = $(foreach p,$(1),$(if $(filter /%,$(1)),$(shell cd $(call root-path,$(1)) && pwd -W)$(call non-root-path,$(1)),$(1)))
+endif
+else
+normalizepath = $(1)
+endif
+
+_srcdir = $(call normalizepath,$(srcdir))
+ifdef JAVA_SOURCEPATH
+SP = $(subst $(SPACE),$(SEP),$(call normalizepath,$(strip $(JAVA_SOURCEPATH))))
+_JAVA_SOURCEPATH = ".$(SEP)$(_srcdir)$(SEP)$(SP)"
+else
+_JAVA_SOURCEPATH = ".$(SEP)$(_srcdir)"
+endif
+
+ifdef JAVA_CLASSPATH
+CP = $(subst $(SPACE),$(SEP),$(call normalizepath,$(strip $(JAVA_CLASSPATH))))
+_JAVA_CLASSPATH = ".$(SEP)$(CP)"
+else
+_JAVA_CLASSPATH = .
+endif
+
+_JAVA_DIR = _java
+$(_JAVA_DIR)::
+	$(NSINSTALL) -D $@
+
+$(_JAVA_DIR)/%.class: %.java Makefile Makefile.in $(_JAVA_DIR)
+	$(CYGWIN_WRAPPER) $(JAVAC) $(JAVAC_FLAGS) -classpath $(_JAVA_CLASSPATH) \
+			-sourcepath $(_JAVA_SOURCEPATH) -d $(_JAVA_DIR) $(_VPATH_SRCS)
+
+$(JAVA_LIBRARY): $(addprefix $(_JAVA_DIR)/,$(JAVA_SRCS:.java=.class)) Makefile Makefile.in
+	$(JAR) cf $@ -C $(_JAVA_DIR) .
+
+GARBAGE_DIRS += $(_JAVA_DIR)
+
+###############################################################################
+# Update Makefiles
+###############################################################################
+
+# In GNU make 3.80, makefiles must use the /cygdrive syntax, even if we're
+# processing them with AS perl. See bug 232003
+ifdef AS_PERL
+CYGWIN_TOPSRCDIR = -nowrap -p $(topsrcdir) -wrap
+endif
+
+# Note: Passing depth to make-makefile is optional.
+#       It saves the script some work, though.
+Makefile: Makefile.in
+	@$(PERL) $(AUTOCONF_TOOLS)/make-makefile -t $(topsrcdir) -d $(DEPTH) $(CYGWIN_TOPSRCDIR)
+
+ifdef SUBMAKEFILES
+# VPATH does not work on some machines in this case, so add $(srcdir)
+$(SUBMAKEFILES): % : $(srcdir)/%.in
+	$(PERL) $(AUTOCONF_TOOLS)/make-makefile -t $(topsrcdir) -d $(DEPTH) $(CYGWIN_TOPSRCDIR) $@
+endif
+
+ifdef AUTOUPDATE_CONFIGURE
+$(topsrcdir)/configure: $(topsrcdir)/configure.in
+	(cd $(topsrcdir) && $(AUTOCONF)) && (cd $(DEPTH) && ./config.status --recheck)
+endif
+
+###############################################################################
+# Bunch of things that extend the 'export' rule (in order):
+###############################################################################
+
+################################################################################
+# Copy each element of EXPORTS to $(PUBLIC)
+
+ifneq ($(EXPORTS)$(XPIDLSRCS)$(SDK_HEADERS)$(SDK_XPIDLSRCS),)
+$(SDK_PUBLIC) $(PUBLIC)::
+	$(NSINSTALL) -D $@
+endif
+
+ifdef MOZ_JAVAXPCOM
+ifneq ($(XPIDLSRCS)$(SDK_XPIDLSRCS),)
+$(JAVA_DIST_DIR)::
+	$(NSINSTALL) -D $@
+endif
+endif
+
+ifneq ($(XPI_NAME),)
+$(FINAL_TARGET):
+	$(NSINSTALL) -D $@
+
+export:: $(FINAL_TARGET)
+endif
+
+ifndef NO_DIST_INSTALL
+ifneq ($(EXPORTS),)
+export:: $(EXPORTS) $(PUBLIC)
+	$(INSTALL) $(IFLAGS1) $^
+endif 
+
+ifneq ($(SDK_HEADERS),)
+export:: $(SDK_HEADERS) $(SDK_PUBLIC)
+	$(INSTALL) $(IFLAGS1) $^
+
+export:: $(SDK_HEADERS) $(PUBLIC)
+	$(INSTALL) $(IFLAGS1) $^
+endif 
+endif # NO_DIST_INSTALL
+
+################################################################################
+# Copy each element of PREF_JS_EXPORTS
+
+ifdef GRE_MODULE
+PREF_DIR = greprefs
+else
+ifneq (,$(XPI_NAME)$(LIBXUL_SDK))
+PREF_DIR = defaults/preferences
+else
+PREF_DIR = defaults/pref
+endif
+endif
+
+ifneq ($(PREF_JS_EXPORTS),)
+# on win32, pref files need CRLF line endings... see bug 206029
+ifeq (WINNT,$(OS_ARCH))
+PREF_PPFLAGS = --line-endings=crlf
+endif
+
+ifndef NO_DIST_INSTALL
+$(FINAL_TARGET)/$(PREF_DIR):
+	$(NSINSTALL) -D $@
+
+libs:: $(FINAL_TARGET)/$(PREF_DIR) $(PREF_JS_EXPORTS)
+	$(EXIT_ON_ERROR)  \
+	for i in $(PREF_JS_EXPORTS); do \
+	  dest=$(FINAL_TARGET)/$(PREF_DIR)/`basename $$i`; \
+	  $(RM) -f $$dest; \
+	  $(PYTHON) $(topsrcdir)/config/Preprocessor.py $(PREF_PPFLAGS) $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) $$i > $$dest; \
+	done
+endif
+endif
+
+################################################################################
+# Copy each element of AUTOCFG_JS_EXPORTS to $(FINAL_TARGET)/defaults/autoconfig
+
+ifneq ($(AUTOCFG_JS_EXPORTS),)
+$(FINAL_TARGET)/defaults/autoconfig::
+	$(NSINSTALL) -D $@
+
+ifndef NO_DIST_INSTALL
+export:: $(AUTOCFG_JS_EXPORTS) $(FINAL_TARGET)/defaults/autoconfig
+	$(INSTALL) $(IFLAGS1) $^
+endif
+
+endif 
+################################################################################
+# Export the elements of $(XPIDLSRCS) & $(SDK_XPIDLSRCS), 
+# generating .h and .xpt files and moving them to the appropriate places.
+
+ifneq ($(XPIDLSRCS)$(SDK_XPIDLSRCS),)
+
+export:: $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.h, $(XPIDLSRCS))
+
+ifndef XPIDL_MODULE
+XPIDL_MODULE		= $(MODULE)
+endif
+
+ifeq ($(XPIDL_MODULE),) # we need $(XPIDL_MODULE) to make $(XPIDL_MODULE).xpt
+export:: FORCE
+	@echo
+	@echo "*** Error processing XPIDLSRCS:"
+	@echo "Please define MODULE or XPIDL_MODULE when defining XPIDLSRCS,"
+	@echo "so we have a module name to use when creating MODULE.xpt."
+	@echo; sleep 2; false
+endif
+
+$(SDK_IDL_DIR) $(IDL_DIR)::
+	$(NSINSTALL) -D $@
+
+# generate .h files from into $(XPIDL_GEN_DIR), then export to $(PUBLIC);
+# warn against overriding existing .h file. 
+$(XPIDL_GEN_DIR)/.done:
+	@if test ! -d $(XPIDL_GEN_DIR); then echo Creating $(XPIDL_GEN_DIR)/.done; rm -rf $(XPIDL_GEN_DIR); mkdir $(XPIDL_GEN_DIR); fi
+	@touch $@
+
+# don't depend on $(XPIDL_GEN_DIR), because the modification date changes
+# with any addition to the directory, regenerating all .h files -> everything.
+
+$(XPIDL_GEN_DIR)/%.h: %.idl $(XPIDL_COMPILE) $(XPIDL_GEN_DIR)/.done
+	$(REPORT_BUILD)
+	$(ELOG) $(XPIDL_COMPILE) -m header -w $(XPIDL_FLAGS) -o $(XPIDL_GEN_DIR)/$* $(_VPATH_SRCS)
+	@if test -n "$(findstring $*.h, $(EXPORTS) $(SDK_HEADERS))"; \
+	  then echo "*** WARNING: file $*.h generated from $*.idl overrides $(srcdir)/$*.h"; else true; fi
+
+ifndef NO_GEN_XPT
+# generate intermediate .xpt files into $(XPIDL_GEN_DIR), then link
+# into $(XPIDL_MODULE).xpt and export it to $(FINAL_TARGET)/components.
+$(XPIDL_GEN_DIR)/%.xpt: %.idl $(XPIDL_COMPILE) $(XPIDL_GEN_DIR)/.done
+	$(REPORT_BUILD)
+	$(ELOG) $(XPIDL_COMPILE) -m typelib -w $(XPIDL_FLAGS) -e $@ -d $(MDDEPDIR)/$*.pp $(_VPATH_SRCS)
+
+# no need to link together if XPIDLSRCS contains only XPIDL_MODULE
+ifneq ($(XPIDL_MODULE).idl,$(strip $(XPIDLSRCS)))
+$(XPIDL_GEN_DIR)/$(XPIDL_MODULE).xpt: $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.xpt,$(XPIDLSRCS) $(SDK_XPIDLSRCS)) Makefile.in Makefile $(XPIDL_LINK)
+	$(XPIDL_LINK) $(XPIDL_GEN_DIR)/$(XPIDL_MODULE).xpt $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.xpt,$(XPIDLSRCS) $(SDK_XPIDLSRCS)) 
+endif # XPIDL_MODULE.xpt != XPIDLSRCS
+
+libs:: $(XPIDL_GEN_DIR)/$(XPIDL_MODULE).xpt
+ifndef NO_DIST_INSTALL
+	$(INSTALL) $(IFLAGS1) $(XPIDL_GEN_DIR)/$(XPIDL_MODULE).xpt $(FINAL_TARGET)/components
+endif
+
+endif # NO_GEN_XPT
+
+GARBAGE_DIRS		+= $(XPIDL_GEN_DIR)
+
+endif # XPIDLSRCS || SDK_XPIDLSRCS
+
+ifneq ($(XPIDLSRCS),)
+# export .idl files to $(IDL_DIR)
+ifndef NO_DIST_INSTALL
+export:: $(XPIDLSRCS) $(IDL_DIR)
+	$(INSTALL) $(IFLAGS1) $^
+
+export:: $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.h, $(XPIDLSRCS)) $(PUBLIC)
+	$(INSTALL) $(IFLAGS1) $^ 
+endif # NO_DIST_INSTALL
+
+endif # XPIDLSRCS
+
+
+
+#
+# General rules for exporting idl files.
+#
+# WORK-AROUND ONLY, for mozilla/tools/module-deps/bootstrap.pl build.
+# Bug to fix idl dependency problems w/o this extra build pass is
+#   http://bugzilla.mozilla.org/show_bug.cgi?id=145777
+#
+$(IDL_DIR)::
+	$(NSINSTALL) -D $@
+
+export-idl:: $(SUBMAKEFILES) $(MAKE_DIRS)
+
+ifneq ($(XPIDLSRCS)$(SDK_XPIDLSRCS),)
+ifndef NO_DIST_INSTALL
+export-idl:: $(XPIDLSRCS) $(SDK_XPIDLSRCS) $(IDL_DIR)
+	$(INSTALL) $(IFLAGS1) $^
+endif
+endif
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+	+$(LOOP_OVER_TOOL_DIRS)
+
+
+
+
+ifneq ($(SDK_XPIDLSRCS),)
+# export .idl files to $(IDL_DIR) & $(SDK_IDL_DIR)
+ifndef NO_DIST_INSTALL
+export:: $(SDK_XPIDLSRCS) $(IDL_DIR)
+	$(INSTALL) $(IFLAGS1) $^
+
+export:: $(SDK_XPIDLSRCS) $(SDK_IDL_DIR)
+	$(INSTALL) $(IFLAGS1) $^
+
+export:: $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.h, $(SDK_XPIDLSRCS)) $(PUBLIC)
+	$(INSTALL) $(IFLAGS1) $^
+
+export:: $(patsubst %.idl,$(XPIDL_GEN_DIR)/%.h, $(SDK_XPIDLSRCS)) $(SDK_PUBLIC)
+	$(INSTALL) $(IFLAGS1) $^
+endif
+
+endif # SDK_XPIDLSRCS
+
+
+
+ifdef MOZ_JAVAXPCOM
+ifneq ($(XPIDLSRCS)$(SDK_XPIDLSRCS),)
+
+JAVA_XPIDLSRCS = $(XPIDLSRCS) $(SDK_XPIDLSRCS)
+
+# A single IDL file can contain multiple interfaces, which result in multiple
+# Java interface files.  So use hidden dependency files.
+JAVADEPFILES = $(addprefix $(JAVA_GEN_DIR)/.,$(JAVA_XPIDLSRCS:.idl=.java.pp))
+
+$(JAVA_GEN_DIR):
+	$(NSINSTALL) -D $@
+GARBAGE_DIRS += $(JAVA_GEN_DIR)
+
+# generate .java files into _javagen/[package name dirs]
+_JAVA_GEN_DIR = $(JAVA_GEN_DIR)/$(JAVA_IFACES_PKG_NAME)
+$(_JAVA_GEN_DIR):
+	$(NSINSTALL) -D $@
+
+$(JAVA_GEN_DIR)/.%.java.pp: %.idl $(XPIDL_COMPILE) $(_JAVA_GEN_DIR)
+	$(REPORT_BUILD)
+	$(ELOG) $(XPIDL_COMPILE) -m java -w -I$(srcdir) -I$(IDL_DIR) -o $(_JAVA_GEN_DIR)/$* $(_VPATH_SRCS)
+	@touch $@
+
+# "Install" generated Java interfaces.  We segregate them based on the XPI_NAME.
+# If XPI_NAME is not set, install into the "default" directory.
+ifneq ($(XPI_NAME),)
+JAVA_INSTALL_DIR = $(JAVA_DIST_DIR)/$(XPI_NAME)
+else
+JAVA_INSTALL_DIR = $(JAVA_DIST_DIR)/default
+endif
+
+$(JAVA_INSTALL_DIR):
+	$(NSINSTALL) -D $@
+
+export:: $(JAVA_DIST_DIR) $(JAVADEPFILES) $(JAVA_INSTALL_DIR)
+	(cd $(JAVA_GEN_DIR) && tar $(TAR_CREATE_FLAGS) - .) | (cd $(JAVA_INSTALL_DIR) && tar -xf -)
+
+endif # XPIDLSRCS || SDK_XPIDLSRCS
+endif # MOZ_JAVAXPCOM
+
+################################################################################
+# Copy each element of EXTRA_COMPONENTS to $(FINAL_TARGET)/components
+ifdef EXTRA_COMPONENTS
+libs:: $(EXTRA_COMPONENTS)
+ifndef NO_DIST_INSTALL
+	$(INSTALL) $(IFLAGS1) $^ $(FINAL_TARGET)/components
+endif
+
+endif
+
+ifdef EXTRA_PP_COMPONENTS
+libs:: $(EXTRA_PP_COMPONENTS)
+ifndef NO_DIST_INSTALL
+	$(EXIT_ON_ERROR) \
+	$(NSINSTALL) -D $(FINAL_TARGET)/components; \
+	for i in $^; do \
+	  dest=$(FINAL_TARGET)/components/`basename $$i`; \
+	  $(RM) -f $$dest; \
+	  $(PYTHON) $(topsrcdir)/config/Preprocessor.py $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) $$i > $$dest; \
+	done
+endif
+
+endif
+
+################################################################################
+# Copy each element of EXTRA_JS_MODULES to $(FINAL_TARGET)/modules
+ifdef EXTRA_JS_MODULES
+libs:: $(EXTRA_JS_MODULES)
+ifndef NO_DIST_INSTALL
+	$(INSTALL) $(IFLAGS1) $^ $(FINAL_TARGET)/modules
+endif
+
+endif
+
+ifdef EXTRA_PP_JS_MODULES
+libs:: $(EXTRA_PP_JS_MODULES)
+ifndef NO_DIST_INSTALL
+	$(EXIT_ON_ERROR) \
+	$(NSINSTALL) -D $(FINAL_TARGET)/modules; \
+	for i in $^; do \
+	  dest=$(FINAL_TARGET)/modules/`basename $$i`; \
+	  $(RM) -f $$dest; \
+	  $(PYTHON) $(topsrcdir)/config/Preprocessor.py $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) $$i > $$dest; \
+	done
+endif
+
+endif
+
+################################################################################
+# SDK
+
+ifneq (,$(SDK_LIBRARY))
+$(SDK_LIB_DIR)::
+	$(NSINSTALL) -D $@
+
+ifndef NO_DIST_INSTALL
+libs:: $(SDK_LIBRARY) $(SDK_LIB_DIR)
+	$(INSTALL) $(IFLAGS2) $^
+endif
+
+endif # SDK_LIBRARY
+
+ifneq (,$(SDK_BINARY))
+$(SDK_BIN_DIR)::
+	$(NSINSTALL) -D $@
+
+ifndef NO_DIST_INSTALL
+libs:: $(SDK_BINARY) $(SDK_BIN_DIR)
+	$(INSTALL) $(IFLAGS2) $^
+endif
+
+endif # SDK_BINARY
+
+################################################################################
+# CHROME PACKAGING
+
+JAR_MANIFEST := $(srcdir)/jar.mn
+
+chrome::
+	$(MAKE) realchrome
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+	+$(LOOP_OVER_TOOL_DIRS)
+
+$(FINAL_TARGET)/chrome:
+	$(NSINSTALL) -D $@
+
+# libs realchrome:: $(CHROME_DEPS) $(FINAL_TARGET)/chrome
+# ifndef NO_DIST_INSTALL
+# 	@$(EXIT_ON_ERROR) \
+# 	if test -f $(JAR_MANIFEST); then \
+# 	  $(PYTHON) $(MOZILLA_DIR)/config/JarMaker.py \
+# 	    $(QUIET) -j $(FINAL_TARGET)/chrome \
+# 	    $(MAKE_JARS_FLAGS) $(XULPPFLAGS) $(DEFINES) $(ACDEFINES) \
+# 	    $(JAR_MANIFEST); \
+# 	fi
+# endif
+
+ifneq ($(DIST_FILES),)
+libs:: $(DIST_FILES)
+	@$(EXIT_ON_ERROR) \
+	for f in $(DIST_FILES); do \
+	  dest=$(FINAL_TARGET)/`basename $$f`; \
+	  $(RM) -f $$dest; \
+	  $(PYTHON) $(MOZILLA_DIR)/config/Preprocessor.py \
+	    $(XULAPP_DEFINES) $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) \
+	    $(srcdir)/$$f > $$dest; \
+	done
+endif
+
+ifneq ($(DIST_CHROME_FILES),)
+libs:: $(DIST_CHROME_FILES)
+	@$(EXIT_ON_ERROR) \
+	for f in $(DIST_CHROME_FILES); do \
+	  dest=$(FINAL_TARGET)/chrome/`basename $$f`; \
+	  $(RM) -f $$dest; \
+	  $(PYTHON) $(MOZILLA_DIR)/config/Preprocessor.py \
+	    $(XULAPP_DEFINES) $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) \
+	    $(srcdir)/$$f > $$dest; \
+	done
+endif
+
+ifneq ($(XPI_PKGNAME),)
+libs realchrome::
+ifdef STRIP_XPI
+ifndef MOZ_DEBUG
+	@echo "Stripping $(XPI_PKGNAME) package directory..."
+	@echo $(FINAL_TARGET)
+	@cd $(FINAL_TARGET) && find . ! -type d \
+			! -name "*.js" \
+			! -name "*.xpt" \
+			! -name "*.gif" \
+			! -name "*.jpg" \
+			! -name "*.png" \
+			! -name "*.xpm" \
+			! -name "*.txt" \
+			! -name "*.rdf" \
+			! -name "*.sh" \
+			! -name "*.properties" \
+			! -name "*.dtd" \
+			! -name "*.html" \
+			! -name "*.xul" \
+			! -name "*.css" \
+			! -name "*.xml" \
+			! -name "*.jar" \
+			! -name "*.dat" \
+			! -name "*.tbl" \
+			! -name "*.src" \
+			! -name "*.reg" \
+			$(PLATFORM_EXCLUDE_LIST) \
+			-exec $(STRIP) $(STRIP_FLAGS) {} >/dev/null 2>&1 \;
+endif
+endif
+	@echo "Packaging $(XPI_PKGNAME).xpi..."
+	cd $(FINAL_TARGET) && $(ZIP) -qr ../$(XPI_PKGNAME).xpi *
+endif
+
+ifdef INSTALL_EXTENSION_ID
+ifndef XPI_NAME
+$(error XPI_NAME must be set for INSTALL_EXTENSION_ID)
+endif
+
+libs::
+	$(RM) -rf "$(DIST)/bin/extensions/$(INSTALL_EXTENSION_ID)"
+	$(NSINSTALL) -D "$(DIST)/bin/extensions/$(INSTALL_EXTENSION_ID)"
+	cd $(FINAL_TARGET) && tar $(TAR_CREATE_FLAGS) - . | (cd "../../bin/extensions/$(INSTALL_EXTENSION_ID)" && tar -xf -)
+
+endif
+
+ifneq (,$(filter flat symlink,$(MOZ_CHROME_FILE_FORMAT)))
+_JAR_REGCHROME_DISABLE_JAR=1
+else
+_JAR_REGCHROME_DISABLE_JAR=0
+endif
+
+REGCHROME = $(PERL) -I$(MOZILLA_DIR)/config $(MOZILLA_DIR)/config/add-chrome.pl \
+	$(if $(filter gtk2,$(MOZ_WIDGET_TOOLKIT)),-x) \
+	$(if $(CROSS_COMPILE),-o $(OS_ARCH)) $(FINAL_TARGET)/chrome/installed-chrome.txt \
+	$(_JAR_REGCHROME_DISABLE_JAR)
+
+REGCHROME_INSTALL = $(PERL) -I$(MOZILLA_DIR)/config $(MOZILLA_DIR)/config/add-chrome.pl \
+	$(if $(filter gtk2,$(MOZ_WIDGET_TOOLKIT)),-x) \
+	$(if $(CROSS_COMPILE),-o $(OS_ARCH)) $(DESTDIR)$(mozappdir)/chrome/installed-chrome.txt \
+	$(_JAR_REGCHROME_DISABLE_JAR)
+
+
+################################################################################
+# Testing frameworks support
+################################################################################
+
+ifdef ENABLE_TESTS
+
+ifdef XPCSHELL_TESTS
+ifndef MODULE
+$(error Must define MODULE when defining XPCSHELL_TESTS.)
+endif
+
+# Test file installation
+libs::
+	@$(EXIT_ON_ERROR) \
+	for testdir in $(XPCSHELL_TESTS); do \
+	  $(INSTALL) \
+	    $(srcdir)/$$testdir/*.js \
+	    $(DEPTH)/_tests/xpcshell-simple/$(MODULE)/$$testdir; \
+	done
+
+# Path formats on Windows are hard.  We require a topsrcdir formatted so that
+# it may be passed to nsILocalFile.initWithPath (in other words, an absolute
+# path of the form X:\path\to\topsrcdir), which we store in NATIVE_TOPSRCDIR.
+# We require a forward-slashed path to topsrcdir so that it may be combined
+# with a relative forward-slashed path for loading scripts, both dynamically
+# and statically for head/test/tail JS files.  Of course, on non-Windows none
+# of this matters, and things will work correctly because everything's
+# forward-slashed, everywhere, always.
+ifdef CYGWIN_WRAPPER
+NATIVE_TOPSRCDIR   := `cygpath -wa $(topsrcdir)`
+FWDSLASH_TOPSRCDIR := `cygpath -ma $(topsrcdir)`
+else
+FWDSLASH_TOPSRCDIR := $(topsrcdir)
+ifeq ($(HOST_OS_ARCH),WINNT)
+NATIVE_TOPSRCDIR   := $(subst /,\\,$(WIN_TOP_SRC))
+else 
+NATIVE_TOPSRCDIR   := $(topsrcdir)
+endif
+endif # CYGWIN_WRAPPER
+
+# Test execution
+check::
+	@$(EXIT_ON_ERROR) \
+	for testdir in $(XPCSHELL_TESTS); do \
+	  $(RUN_TEST_PROGRAM) \
+	    $(topsrcdir)/tools/test-harness/xpcshell-simple/test_all.sh \
+	      $(DIST)/bin/xpcshell \
+	      $(FWDSLASH_TOPSRCDIR) \
+	      $(NATIVE_TOPSRCDIR) \
+	      $(DEPTH)/_tests/xpcshell-simple/$(MODULE)/$$testdir; \
+	done
+
+# Test execution
+check-interactive::
+	@$(EXIT_ON_ERROR) \
+	$(RUN_TEST_PROGRAM) \
+	  $(topsrcdir)/tools/test-harness/xpcshell-simple/test_one.sh \
+	    $(DIST)/bin/xpcshell \
+	    $(FWDSLASH_TOPSRCDIR) \
+	    $(NATIVE_TOPSRCDIR) \
+	    $(DEPTH)/_tests/xpcshell-simple/$(MODULE)/$$testdir \
+	    $(SOLO_FILE) 1;
+
+# Test execution
+check-one::
+	@$(EXIT_ON_ERROR) \
+	$(RUN_TEST_PROGRAM) \
+	  $(topsrcdir)/tools/test-harness/xpcshell-simple/test_one.sh \
+	    $(DIST)/bin/xpcshell \
+	    $(FWDSLASH_TOPSRCDIR) \
+	    $(NATIVE_TOPSRCDIR) \
+	    $(DEPTH)/_tests/xpcshell-simple/$(MODULE)/$$testdir \
+	    $(SOLO_FILE) 0;
+
+endif # XPCSHELL_TESTS
+
+endif # ENABLE_TESTS
+
+
+#############################################################################
+# Dependency system
+#############################################################################
+ifdef COMPILER_DEPEND
+depend::
+	@echo "$(MAKE): No need to run depend target.\
+			Using compiler-based depend." 1>&2
+ifeq ($(GNU_CC)$(GNU_CXX),)
+# Non-GNU compilers
+	@echo "`echo '$(MAKE):'|sed 's/./ /g'`"\
+	'(Compiler-based depend was turned on by "--enable-md".)' 1>&2
+else
+# GNU compilers
+	@space="`echo '$(MAKE): '|sed 's/./ /g'`";\
+	echo "$$space"'Since you are using a GNU compiler,\
+		it is on by default.' 1>&2; \
+	echo "$$space"'To turn it off, pass --disable-md to configure.' 1>&2
+endif
+
+else # ! COMPILER_DEPEND
+
+ifndef MOZ_AUTO_DEPS
+
+define MAKE_DEPS_NOAUTO
+	$(MKDEPEND) -w1024 -o'.$(OBJ_SUFFIX)' -f- $(DEFINES) $(ACDEFINES) $(INCLUDES) $< 2>/dev/null | sed -e "s|^[^ ]*/||" > $@
+endef
+
+$(MDDEPDIR)/%.pp: %.c
+	$(REPORT_BUILD)
+	@$(MAKE_DEPS_NOAUTO)
+
+$(MDDEPDIR)/%.pp: %.cpp
+	$(REPORT_BUILD)
+	@$(MAKE_DEPS_NOAUTO)
+
+$(MDDEPDIR)/%.pp: %.s
+	$(REPORT_BUILD)
+	@$(MAKE_DEPS_NOAUTO)
+
+ifneq (,$(OBJS)$(XPIDLSRCS)$(SDK_XPIDLSRCS)$(SIMPLE_PROGRAMS))
+depend:: $(SUBMAKEFILES) $(MAKE_DIRS) $(MDDEPFILES)
+else
+depend:: $(SUBMAKEFILES)
+endif
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+	+$(LOOP_OVER_TOOL_DIRS)
+
+dependclean:: $(SUBMAKEFILES)
+	rm -f $(MDDEPFILES)
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+	+$(LOOP_OVER_TOOL_DIRS)
+
+endif # MOZ_AUTO_DEPS
+
+endif # COMPILER_DEPEND
+
+
+#############################################################################
+# MDDEPDIR is the subdirectory where all the dependency files are placed.
+#   This uses a make rule (instead of a macro) to support parallel
+#   builds (-jN). If this were done in the LOOP_OVER_DIRS macro, two
+#   processes could simultaneously try to create the same directory.
+#
+#   We use $(CURDIR) in the rule's target to ensure that we don't find
+#   a dependency directory in the source tree via VPATH (perhaps from
+#   a previous build in the source tree) and thus neglect to create a
+#   dependency directory in the object directory, where we really need
+#   it.
+
+$(CURDIR)/$(MDDEPDIR):
+	@if test ! -d $@; then echo Creating $@; rm -rf $@; mkdir $@; else true; fi
+
+ifneq (,$(filter-out all chrome default export realchrome tools clean clobber clobber_all distclean realclean,$(MAKECMDGOALS)))
+ifneq (,$(OBJS)$(XPIDLSRCS)$(SDK_XPIDLSRCS)$(SIMPLE_PROGRAMS))
+MDDEPEND_FILES		:= $(strip $(wildcard $(MDDEPDIR)/*.pp))
+
+ifneq (,$(MDDEPEND_FILES))
+ifdef PERL
+# The script mddepend.pl checks the dependencies and writes to stdout
+# one rule to force out-of-date objects. For example,
+#   foo.o boo.o: FORCE
+# The script has an advantage over including the *.pp files directly
+# because it handles the case when header files are removed from the build.
+# 'make' would complain that there is no way to build missing headers.
+ifeq (,$(MAKE_RESTARTS))
+$(MDDEPDIR)/.all.pp: FORCE
+	@$(PERL) $(BUILD_TOOLS)/mddepend.pl $@ $(MDDEPEND_FILES)
+endif
+-include $(MDDEPDIR)/.all.pp
+else
+include $(MDDEPEND_FILES)
+endif
+endif
+
+endif
+endif
+#############################################################################
+
+-include $(topsrcdir)/$(MOZ_BUILD_APP)/app-rules.mk
+-include $(MY_RULES)
+
+#
+# This speeds up gmake's processing if these files don't exist.
+#
+$(MY_CONFIG) $(MY_RULES):
+	@touch $@
+
+#
+# Generate Emacs tags in a file named TAGS if ETAGS was set in $(MY_CONFIG)
+# or in $(MY_RULES)
+#
+ifdef ETAGS
+ifneq ($(CSRCS)$(CPPSRCS)$(HEADERS),)
+all:: TAGS
+TAGS:: $(CSRCS) $(CPPSRCS) $(HEADERS)
+	$(ETAGS) $(CSRCS) $(CPPSRCS) $(HEADERS)
+endif
+endif
+
+################################################################################
+# Special gmake rules.
+################################################################################
+
+
+#
+# Disallow parallel builds with MSVC < 8
+#
+ifneq (,$(filter 1200 1300 1310,$(_MSC_VER)))
+.NOTPARALLEL:
+endif
+
+#
+# Re-define the list of default suffixes, so gmake won't have to churn through
+# hundreds of built-in suffix rules for stuff we don't need.
+#
+.SUFFIXES:
+
+#
+# Fake targets.  Always run these rules, even if a file/directory with that
+# name already exists.
+#
+.PHONY: all all_platforms alltags boot checkout chrome realchrome clean clobber clobber_all export install libs makefiles realclean run_viewer run_apprunner tools $(DIRS) $(TOOL_DIRS) FORCE check check-interactive check-one
+
+# Used as a dependency to force targets to rebuild
+FORCE:
+
+# Delete target if error occurs when building target
+.DELETE_ON_ERROR:
+
+# Properly set LIBPATTERNS for the platform
+.LIBPATTERNS = $(if $(IMPORT_LIB_SUFFIX),$(LIB_PREFIX)%.$(IMPORT_LIB_SUFFIX)) $(LIB_PREFIX)%.$(LIB_SUFFIX) $(DLL_PREFIX)%$(DLL_SUFFIX) 
+
+tags: TAGS
+
+TAGS: $(SUBMAKEFILES) $(CSRCS) $(CPPSRCS) $(wildcard *.h)
+	-etags $(CSRCS) $(CPPSRCS) $(wildcard *.h)
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+
+echo-variable-%:
+	@echo $($*)
+
+echo-tiers:
+	@echo $(TIERS)
+
+echo-dirs:
+	@echo $(DIRS)
+
+echo-module:
+	@echo $(MODULE)
+
+echo-requires:
+	@echo $(REQUIRES)
+
+echo-requires-recursive::
+ifdef _REPORT_ALL_DIRS
+	@echo $(subst $(topsrcdir)/,,$(srcdir)): $(MODULE): $(REQUIRES)
+else
+	@$(if $(REQUIRES),echo $(subst $(topsrcdir)/,,$(srcdir)): $(MODULE): $(REQUIRES))
+endif
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+
+echo-depth-path:
+	@$(topsrcdir)/build/unix/print-depth-path.sh
+
+echo-module-name:
+	@$(topsrcdir)/build/package/rpm/print-module-name.sh
+
+echo-module-filelist:
+	@$(topsrcdir)/build/package/rpm/print-module-filelist.sh
+
+showtargs:
+ifneq (,$(filter $(PROGRAM) $(HOST_PROGRAM) $(SIMPLE_PROGRAMS) $(HOST_LIBRARY) $(LIBRARY) $(SHARED_LIBRARY),$(TARGETS)))
+	@echo --------------------------------------------------------------------------------
+	@echo "PROGRAM             = $(PROGRAM)"
+	@echo "SIMPLE_PROGRAMS     = $(SIMPLE_PROGRAMS)"
+	@echo "LIBRARY             = $(LIBRARY)"
+	@echo "SHARED_LIBRARY      = $(SHARED_LIBRARY)"
+	@echo "SHARED_LIBRARY_LIBS = $(SHARED_LIBRARY_LIBS)"
+	@echo "LIBS                = $(LIBS)"
+	@echo "DEF_FILE            = $(DEF_FILE)"
+	@echo "IMPORT_LIBRARY      = $(IMPORT_LIBRARY)"
+	@echo "STATIC_LIBS         = $(STATIC_LIBS)"
+	@echo "SHARED_LIBS         = $(SHARED_LIBS)"
+	@echo "EXTRA_DSO_LIBS      = $(EXTRA_DSO_LIBS)"
+	@echo "EXTRA_DSO_LDOPTS    = $(EXTRA_DSO_LDOPTS)"
+	@echo "DEPENDENT_LIBS      = $(DEPENDENT_LIBS)"
+	@echo --------------------------------------------------------------------------------
+endif
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+
+showbuild:
+	@echo "MOZ_BUILD_ROOT     = $(MOZ_BUILD_ROOT)"
+	@echo "MOZ_WIDGET_TOOLKIT = $(MOZ_WIDGET_TOOLKIT)"
+	@echo "CC                 = $(CC)"
+	@echo "CXX                = $(CXX)"
+	@echo "CCC                = $(CCC)"
+	@echo "CPP                = $(CPP)"
+	@echo "LD                 = $(LD)"
+	@echo "AR                 = $(AR)"
+	@echo "IMPLIB             = $(IMPLIB)"
+	@echo "FILTER             = $(FILTER)"
+	@echo "MKSHLIB            = $(MKSHLIB)"
+	@echo "MKCSHLIB           = $(MKCSHLIB)"
+	@echo "RC                 = $(RC)"
+	@echo "CFLAGS             = $(CFLAGS)"
+	@echo "OS_CFLAGS          = $(OS_CFLAGS)"
+	@echo "COMPILE_CFLAGS     = $(COMPILE_CFLAGS)"
+	@echo "CXXFLAGS           = $(CXXFLAGS)"
+	@echo "OS_CXXFLAGS        = $(OS_CXXFLAGS)"
+	@echo "COMPILE_CXXFLAGS   = $(COMPILE_CXXFLAGS)"
+	@echo "COMPILE_CMFLAGS    = $(COMPILE_CMFLAGS)"
+	@echo "COMPILE_CMMFLAGS   = $(COMPILE_CMMFLAGS)"
+	@echo "LDFLAGS            = $(LDFLAGS)"
+	@echo "OS_LDFLAGS         = $(OS_LDFLAGS)"
+	@echo "DSO_LDOPTS         = $(DSO_LDOPTS)"
+	@echo "OS_INCLUDES        = $(OS_INCLUDES)"
+	@echo "OS_LIBS            = $(OS_LIBS)"
+	@echo "EXTRA_LIBS         = $(EXTRA_LIBS)"
+	@echo "BIN_FLAGS          = $(BIN_FLAGS)"
+	@echo "INCLUDES           = $(INCLUDES)"
+	@echo "DEFINES            = $(DEFINES)"
+	@echo "ACDEFINES          = $(ACDEFINES)"
+	@echo "BIN_SUFFIX         = $(BIN_SUFFIX)"
+	@echo "LIB_SUFFIX         = $(LIB_SUFFIX)"
+	@echo "DLL_SUFFIX         = $(DLL_SUFFIX)"
+	@echo "IMPORT_LIB_SUFFIX  = $(IMPORT_LIB_SUFFIX)"
+	@echo "INSTALL            = $(INSTALL)"
+
+showhost:
+	@echo "HOST_CC            = $(HOST_CC)"
+	@echo "HOST_CXX           = $(HOST_CXX)"
+	@echo "HOST_CFLAGS        = $(HOST_CFLAGS)"
+	@echo "HOST_LDFLAGS       = $(HOST_LDFLAGS)"
+	@echo "HOST_LIBS          = $(HOST_LIBS)"
+	@echo "HOST_EXTRA_LIBS    = $(HOST_EXTRA_LIBS)"
+	@echo "HOST_EXTRA_DEPS    = $(HOST_EXTRA_DEPS)"
+	@echo "HOST_PROGRAM       = $(HOST_PROGRAM)"
+	@echo "HOST_OBJS          = $(HOST_OBJS)"
+	@echo "HOST_PROGOBJS      = $(HOST_PROGOBJS)"
+	@echo "HOST_LIBRARY       = $(HOST_LIBRARY)"
+
+showbuildmods::
+	@echo "Build Modules	= $(BUILD_MODULES)"
+	@echo "Module dirs	= $(BUILD_MODULE_DIRS)"
+
+zipmakes:
+ifneq (,$(filter $(PROGRAM) $(SIMPLE_PROGRAMS) $(LIBRARY) $(SHARED_LIBRARY),$(TARGETS)))
+	zip $(DEPTH)/makefiles $(subst $(topsrcdir),$(MOZ_SRC)/mozilla,$(srcdir)/Makefile.in)
+endif
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+
+documentation:
+	@cd $(DEPTH)
+	$(DOXYGEN) $(DEPTH)/config/doxygen.cfg
+
+check:: $(SUBMAKEFILES) $(MAKE_DIRS)
+	+$(LOOP_OVER_PARALLEL_DIRS)
+	+$(LOOP_OVER_DIRS)
+	+$(LOOP_OVER_TOOL_DIRS)