cmtool 0.4.0 → 3.0.0

data/spec/controllers/newsletter_subscriptions_controller_spec.rb

@@ -1,6 +1,7 @@
 require 'spec_helper'
 
-describe Cmtool::NewsletterSubscriptionsController do
+describe Cmtool::NewsletterSubscriptionsController, type: :controller do
+  routes { Cmtool::Engine.routes }
   before :each do
     sign_in @user
   end
@@ -34,7 +35,7 @@ describe Cmtool::NewsletterSubscriptionsController do
   describe "GET show" do
     it "assigns the requested newsletter_subscription as @newsletter_subscription" do
       newsletter_subscription = create :newsletter_subscription
-      get :show, :id => newsletter_subscription.id
+      get :show, id: newsletter_subscription.id
       assigns(:newsletter_subscription).should eq(newsletter_subscription)
     end
   end
@@ -49,7 +50,7 @@ describe Cmtool::NewsletterSubscriptionsController do
   describe "GET edit" do
     it "assigns the requested newsletter_subscription as @newsletter_subscription" do
       newsletter_subscription = create :newsletter_subscription
-      get :edit, :id => newsletter_subscription.id
+      get :edit, id: newsletter_subscription.id
       assigns(:newsletter_subscription).should eq(newsletter_subscription)
     end
   end
@@ -58,18 +59,18 @@ describe Cmtool::NewsletterSubscriptionsController do
     describe "with valid params" do
       it "creates a new Cmtool::NewsletterSubscription" do
         expect {
-          post :create, :newsletter_subscription => build(:newsletter_subscription).attributes
+          post :create, newsletter_subscription: build(:newsletter_subscription).attributes
         }.to change(Cmtool::NewsletterSubscription, :count).by(1)
       end
 
       it "assigns a newly created newsletter_subscription as @newsletter_subscription" do
-        post :create, :newsletter_subscription => build(:newsletter_subscription).attributes
+        post :create, newsletter_subscription: build(:newsletter_subscription).attributes
         assigns(:newsletter_subscription).should be_a(Cmtool::NewsletterSubscription)
         assigns(:newsletter_subscription).should be_persisted
       end
 
       it "redirects to the newsletter_subscriptions newsletter_subscription" do
-        post :create, :newsletter_subscription => build(:newsletter_subscription).attributes
+        post :create, newsletter_subscription: build(:newsletter_subscription).attributes
         response.should redirect_to(Cmtool::NewsletterSubscription.last)
       end
     end
@@ -77,15 +78,15 @@ describe Cmtool::NewsletterSubscriptionsController do
     describe "with invalid params" do
       it "assigns a newly created but unsaved newsletter_subscription as @newsletter_subscription" do
         # Trigger the behavior that occurs when invalid params are submitted
-        Cmtool::NewsletterSubscription.any_instance.stub(:save).and_return(false)
-        post :create, :newsletter_subscription => {}
+        allow_any_instance_of( Cmtool::NewsletterSubscription ).to receive(:save).and_return(false)
+        post :create, newsletter_subscription: {email: ''}
         assigns(:newsletter_subscription).should be_a_new(Cmtool::NewsletterSubscription)
       end
 
       it "re-renders the 'new' template" do
         # Trigger the behavior that occurs when invalid params are submitted
-        Cmtool::NewsletterSubscription.any_instance.stub(:save).and_return(false)
-        post :create, :newsletter_subscription => {}
+        allow_any_instance_of( Cmtool::NewsletterSubscription ).to receive(:save).and_return(false)
+        post :create, newsletter_subscription: {email: ''}
         response.should render_template("new")
       end
     end
@@ -99,19 +100,19 @@ describe Cmtool::NewsletterSubscriptionsController do
         # specifies that the Cmtool::NewsletterSubscription created on the previous line
         # receives the :update_attributes message with whatever params are
         # submitted in the request.
-        Cmtool::NewsletterSubscription.any_instance.should_receive(:update_attributes).with({'these' => 'params'})
-        put :update, :id => newsletter_subscription.id, :newsletter_subscription => {'these' => 'params'}
+        Cmtool::NewsletterSubscription.any_instance.should_receive(:update_attributes).with('email' => 'test44@cmtool.nl')
+        put :update, id: newsletter_subscription.id, newsletter_subscription: {'email' => 'test44@cmtool.nl'}
       end
 
       it "assigns the requested newsletter_subscription as @newsletter_subscription" do
         newsletter_subscription = create(:newsletter_subscription)
-        put :update, :id => newsletter_subscription.id, :newsletter_subscription => newsletter_subscription.attributes
-        assigns(:newsletter_subscription).should eq(newsletter_subscription)
+        put :update, id: newsletter_subscription.id, newsletter_subscription: newsletter_subscription.attributes
+        assigns(:newsletter_subscription).id.should eq newsletter_subscription.id
       end
 
       it "redirects to the newsletter_subscription" do
         newsletter_subscription = create(:newsletter_subscription)
-        put :update, :id => newsletter_subscription.id, :newsletter_subscription => newsletter_subscription.attributes
+        put :update, id: newsletter_subscription.id, newsletter_subscription: newsletter_subscription.attributes
         response.should redirect_to(newsletter_subscription)
       end
     end
@@ -121,7 +122,7 @@ describe Cmtool::NewsletterSubscriptionsController do
         newsletter_subscription = create(:newsletter_subscription)
         # Trigger the behavior that occurs when invalid params are submitted
         Cmtool::NewsletterSubscription.any_instance.stub(:save).and_return(false)
-        put :update, :id => newsletter_subscription.id, :newsletter_subscription => {}
+        put :update, id: newsletter_subscription.id, newsletter_subscription: {email: ''}
         assigns(:newsletter_subscription).should eq(newsletter_subscription)
       end
 
@@ -129,7 +130,7 @@ describe Cmtool::NewsletterSubscriptionsController do
         newsletter_subscription = create(:newsletter_subscription)
         # Trigger the behavior that occurs when invalid params are submitted
         Cmtool::NewsletterSubscription.any_instance.stub(:save).and_return(false)
-        put :update, :id => newsletter_subscription.id, :newsletter_subscription => {}
+        put :update, id: newsletter_subscription.id, newsletter_subscription: {email: ''}
         response.should render_template("edit")
       end
     end
@@ -140,20 +141,20 @@ describe Cmtool::NewsletterSubscriptionsController do
       @request.env['HTTP_REFERER'] = newsletter_subscriptions_path
       newsletter_subscription = create(:newsletter_subscription)
       expect {
-        delete :destroy, :id => newsletter_subscription.id
+        delete :destroy, id: newsletter_subscription.id
       }.to change(Cmtool::NewsletterSubscription, :count).by(-1)
     end
 
     it "redirects to the newsletter_subscriptions list" do
       @request.env['HTTP_REFERER'] = newsletter_subscriptions_path
       newsletter_subscription = create(:newsletter_subscription)
-      delete :destroy, :id => newsletter_subscription.id
+      delete :destroy, id: newsletter_subscription.id
       response.should redirect_to(newsletter_subscriptions_path)
     end
     it "redirects to the newsletter_subscriptions list when called from edit page" do
       newsletter_subscription = create(:newsletter_subscription)
       @request.env['HTTP_REFERER'] = edit_newsletter_subscription_path(newsletter_subscription)
-      delete :destroy, :id => newsletter_subscription.id
+      delete :destroy, id: newsletter_subscription.id
       response.should redirect_to(newsletter_subscriptions_path)
     end
   end

data/spec/controllers/pages_controller_spec.rb

@@ -1,13 +1,13 @@
 require 'spec_helper'
 
-describe Cmtool::PagesController do
+describe Cmtool::PagesController, type: :controller do
+  routes { Cmtool::Engine.routes }
+
   describe 'GET index' do
     it "should render standard view when tree is available" do
-      #binding.pry
       create_pages_tree
-      ->{ get :index }.should_not raise_error
+      expect{ get :index }.not_to raise_error
     end
   end
 
-
 end

data/spec/dummy/app/assets/stylesheets/application.css

@@ -11,3 +11,6 @@
  *= require_self
  *= require_tree .
 */
+body{
+  background-color: #aaf;
+}

data/spec/dummy/app/controllers/application_controller.rb

@@ -1,3 +1,13 @@
 class ApplicationController < ActionController::Base
   protect_from_forgery
+
+private
+
+  def authorize_cmtool
+    redirect_to main_app.new_user_session_path unless current_user.present?
+  end
+
+  def cmtool_user
+    current_user
+  end
 end

data/spec/dummy/app/models/user.rb

@@ -1,3 +1,4 @@
 class User
   include Cmtool::Includes::User
+  devise :database_authenticatable, :recoverable, :rememberable, :trackable
 end

data/spec/dummy/config/application.rb

@@ -1,16 +1,13 @@
 require File.expand_path('../boot', __FILE__)
 
+require 'rails'
 require "action_controller/railtie"
 require "action_mailer/railtie"
-require "active_resource/railtie"
+#require "active_resource/railtie"
+require 'rails/test_unit/railtie'
 require "sprockets/railtie"
 
-if defined?(Bundler)
-  # If you precompile assets before deploying to production, use this line
-  Bundler.require(*Rails.groups(:assets => %w(development test)))
-  # If you want your assets lazily compiled in production, use this line
-  # Bundler.require(:default, :assets, Rails.env)
-end
+Bundler.require(*Rails.groups(assets: %w(development test)))
 require "cmtool"
 
 module Dummy
@@ -36,6 +33,7 @@ module Dummy
     # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
     # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
     # config.i18n.default_locale = :de
+    config.i18n.available_locales = [:en, :nl, :de, :es]
 
     # Configure the default encoding used in templates for Ruby 1.9.
     config.encoding = "utf-8"

data/spec/dummy/config/environments/development.rb

@@ -4,7 +4,7 @@ Dummy::Application.configure do
   # In the development environment your application's code is reloaded on
   # every request. This slows down response time but is perfect for development
   # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
+  config.eager_load = false
 
   # Log error messages when you accidentally call methods on nil.
   config.whiny_nils = true

data/spec/dummy/config/environments/production.rb

@@ -9,7 +9,7 @@ Dummy::Application.configure do
   config.action_controller.perform_caching = true
 
   # Disable Rails's static asset server (Apache or nginx will already do this)
-  config.serve_static_assets = false
+  config.serve_static_files = false
 
   # Compress JavaScripts and CSS
   config.assets.compress = true

data/spec/dummy/config/environments/test.rb

@@ -8,7 +8,7 @@ Dummy::Application.configure do
   config.cache_classes = true
 
   # Configure static asset server for tests with Cache-Control for performance
-  config.serve_static_assets = true
+  config.serve_static_files = true
   config.static_cache_control = "public, max-age=3600"
 
   # Log error messages when you accidentally call methods on nil

data/spec/dummy/config/initializers/devise.rb

@@ -0,0 +1,257 @@
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # The secret key used by Devise. Devise uses this key to generate
+  # random tokens. Changing this key will render invalid all existing
+  # confirmation, reset password and unlock tokens in the database.
+  config.secret_key = '0182bf2df57625f0948c148caf0a8c0fdd5dfdf1c611665c1063f5de3e046939bca0f0c213e77da2fe835cdf238d83a38cb6494de9e4b5bf793be32fc711a844'
+
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class
+  # with default "from" parameter.
+  config.mailer_sender = 'please-change-me-at-config-initializers-devise@example.com'
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = 'Devise::Mailer'
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  #require 'devise/orm/simply_stored'
+  require 'orm_adapter/adapters/simply_stored'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [ :email ]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [ :email ]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:database]` will
+  # enable it only for database authentication. The supported strategies are:
+  # :database      = Support basic authentication with authentication key + password
+  # config.http_authenticatable = false
+
+  # If http headers should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. 'Application' by default.
+  # config.http_authentication_realm = 'Application'
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # particular strategies by setting this option.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing skip: :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # By default, Devise cleans up the CSRF token on authentication to
+  # avoid CSRF token fixation attacks. This means that, when using AJAX
+  # requests for sign in and sign up, you need to get a new CSRF token
+  # from the server. You can disable this option at your own risk.
+  # config.clean_up_csrf_token_on_authentication = true
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments. Note that, for bcrypt (the default
+  # encryptor), the cost increases exponentially with the number of stretches (e.g.
+  # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation).
+  config.stretches = Rails.env.test? ? 1 : 10
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = 'dd02671a3d4beaecd81fa577583d0f3d0218432444e110bb35ee2f8c79ca53a2c4f9ed12aeb345549610439c367ce99dd5a4da13f949d4498ed9f9e4ec38546d'
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming their account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming their account,
+  # access will be blocked just in the third day. Default is 0.days, meaning
+  # the user cannot access the website without confirming their account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # A period that the user is allowed to confirm their account before their
+  # token becomes invalid. For example, if set to 3.days, the user can confirm
+  # their account within 3 days after the mail was sent, but on the fourth day
+  # their account can't be confirmed with the token any more.
+  # Default is nil, meaning there is no restriction on how long a user can take
+  # before confirming their account.
+  # config.confirm_within = 3.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed, new email is stored in
+  # unconfirmed_email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [ :email ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # secure: true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length.
+  config.password_length = 8..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  # config.email_regexp = /\A[^@]+@[^@]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # If true, expires auth token on session timeout.
+  # config.expire_auth_token_on_timeout = false
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [ :email ]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # Warn on the last attempt before the account is locked.
+  # config.last_attempt_warning = false
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper).
+  #
+  # Require the `devise-encryptable` gem when using anything other than bcrypt
+  # config.encryptor = :sha512
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Set this configuration to false if you want /users/sign_out to sign out
+  # only the current scope. By default, Devise signs out all scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ['*/*', :html]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = [:get, :delete]
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(scope: :user).unshift :some_external_strategy
+  # end
+
+  # ==> Mountable engine configurations
+  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
+  # is mountable, there are some extra configurations to be taken into account.
+  # The following options are available, assuming the engine is mounted as:
+  #
+  #     mount MyEngine, at: '/my_engine'
+  #
+  # The router that invoked `devise_for`, in the example above, would be:
+  # config.router_name = :my_engine
+  #
+  # When using omniauth, Devise cannot automatically set Omniauth path,
+  # so you need to do it manually. For the users scope, it would be:
+  # config.omniauth_path_prefix = '/my_engine/users/auth'
+end

data/spec/dummy/config/routes.rb

@@ -2,7 +2,11 @@ Rails.application.routes.draw do
 
   devise_for :users, :controllers => {:sessions => 'cmtool/sessions', :passwords => 'cmtool/passwords'}
   mount Cmtool::Engine => "/cmtool"
-  match "/:name" => "pages#show"
-  match "/*url" => "pages#not_found"
+  get '/sitemap(.:format)' => 'pages#sitemap'
+  get "/:name" => "pages#show"
+  scope '(/:locale)', constraints: {locale: /nl|be|de|fr|en/}, defaults: { locale: :nl } do
+    get "/:name" => "pages#show", constraints: {name: /.*/},  as: :page
+  end
+  get "/*url" => "pages#not_found"
   root :to => 'pages#home'
 end

data/spec/dummy/config/secrets.yml

@@ -0,0 +1,4 @@
+development:
+  secret_key_base: 4fbf2962d6b16e71caeb8cb5c7c97e8a951ae8fd284ce9e89bfd6a6b5a6796f4bcc4b45dbe1fd82e1fc5316dfbaff4b70b3d91f8102b30b41fac71b2824345dc
+test:
+  secret_key_base: 4fbf2962d6b16e71caeb8cb5c7c97e8a951ae8fd284ce9e89bfd6a6b5a6796f4bcc4b45dbe1fd82e1fc5316dfbaff4b70b3d91f8102b30b41fac71b2824345dc

data/spec/factories/page_factory.rb

@@ -0,0 +1,6 @@
+FactoryGirl.define do
+  factory :page, class: Page do
+    sequence(:name){|i| "page#{i}"}
+    locale 'en'
+  end
+end

data/spec/features/cmtool/pages/listing_spec.rb

@@ -0,0 +1,40 @@
+require 'spec_helper'
+
+feature 'Pages index' do
+  scenario 'visit root' do
+    visit '/cmtool'
+    page.current_path.should == '/users/sign_in'
+  end
+  context 'with logged in user' do
+    background do
+      create_user 'test@example.com'
+      login_as 'test@example.com'
+    end
+    context 'without pages' do
+      scenario 'list pages as root' do
+        visit '/cmtool'
+        page.should have_link 'New Page'
+      end
+    end
+
+    context 'with pages' do
+      background do
+        @nl1 = create :page, name: 'nl1', locale: 'nl'
+        @nl11 = create :page, name: 'nl11', locale: 'nl', parent_id: @nl1.id
+        @nl111 = create :page, name: 'nl111', locale: 'nl', parent_id: @nl11.id
+        @nl12 = create :page, name: 'nl12', locale: 'nl', parent_id: @nl1.id
+
+        @en1 = create :page, name: 'en1', locale: 'en'
+      end
+
+      scenario 'see both languages' do
+        visit '/cmtool'
+        page.should have_link 'nl1'
+        page.should have_link '- nl11'
+        page.should have_link '- - nl111'
+        page.should have_link '- nl12'
+        page.should have_link 'en1'
+      end
+    end
+  end
+end

data/spec/features/cmtool/pages/preview_spec.rb

@@ -0,0 +1,21 @@
+require 'spec_helper'
+
+feature 'Page preview' do
+  context 'with logged in user' do
+    background do
+      create_user 'test@example.com'
+      login_as 'test@example.com'
+    end
+
+    context 'with pages' do
+      background do
+        @page = create :page, name: 'nl1', locale: 'nl'
+      end
+
+      scenario 'see both languages', js: true do
+        visit "/cmtool/pages/#{@page.id}"
+
+      end
+    end
+  end
+end

data/spec/features/cmtool/sitemap_spec.rb

@@ -0,0 +1,12 @@
+require 'spec_helper'
+
+feature 'sitemap.xml' do
+  scenario 'proper sitemap' do
+    p1 = Page.create name: 'nl-1', title: 'NL 1', locale: 'nl'
+    p1 = Page.create name: 'en-1', title: 'EN 1', locale: 'en'
+    visit "/sitemap.xml"
+    page.body.should include "<lastmod>#{Date.today.strftime('%Y-%m-%d')}</lastmod>"
+    page.body.should include "<loc>http://www.example.com/en/en-1</loc>"
+    page.body.should include "<loc>http://www.example.com/nl-1</loc>"
+  end
+end

data/spec/includes/pages_controller_include_spec.rb

@@ -0,0 +1,11 @@
+require 'spec_helper'
+
+describe PagesController, type: :controller do
+  describe 'sitemap' do
+    it 'returns a proper sitemap' do
+      create_pages_tree
+      get :sitemap, format: 'xml'
+      response.body.should include "<loc>http://test.host/en/child2.2</loc>"
+    end
+  end
+end

data/spec/models/cmtool/contact_form_spec.rb

@@ -0,0 +1,10 @@
+require 'spec_helper'
+
+describe Cmtool::ContactForm do
+
+  it "is invalid with Funded.com in email or body" do
+    build(:contact_form).should be_valid
+    build(:contact_form, email: "fundingteam+url.com@getbusinessfunded.com").should_not be_valid
+    build(:contact_form, body: "fundingteam+url.com@getbusinessFunded.com").should_not be_valid
+  end
+end