cmor_files 0.0.50.pre → 0.0.55.pre

data/spec/models/cmor/files/file_detail_spec.rb

@@ -1,7 +0,0 @@
-require 'rails_helper'
-
-module Cmor::Files
-  RSpec.describe FileDetail, type: :model do
-    pending "add some examples to (or delete) #{__FILE__}"
-  end
-end

data/spec/models/cmor/files/folder_spec.rb

@@ -1,12 +0,0 @@
-require 'rails_helper'
-
-module Cmor::Files
-  RSpec.describe Folder, type: :model do
-    it { expect(subject).to respond_to(:assets=) }
-    it { expect(subject).to respond_to(:assets) }
-    it { expect(subject).to respond_to(:assets_count) }
-    
-    it { expect(subject).to validate_presence_of(:name) }
-    it { expect(subject).to validate_uniqueness_of(:name).scoped_to([:locale]) }
-  end
-end

data/spec/models/generic_spec.rb

@@ -1,50 +0,0 @@
-require 'rails_helper'
-
-RSpec.describe 'ActiveRecord::Base models', type: :model do
-  DEFAULT_SPECS_TO_RUN = [
-    :is_an_active_record,
-    :is_instanciable,
-    :valid_with_correct_attributes,
-    :not_valid_with_empty_attributes,
-    :saves_with_valid_attributes
-  ]
-
-  {
-    Cmor::Files::Folder     => {},
-    Cmor::Files::FileDetail => {},
-  }.each do |model, options|
-    options.reverse_merge!(specs_to_run: DEFAULT_SPECS_TO_RUN, specs_to_skip: [])
-    specs_to_run = options.delete(:specs_to_run)
-    specs_to_skip = options.delete(:specs_to_skip)
-    specs = specs_to_run - specs_to_skip
-    
-    describe model do
-      it 'is an ActiveRecord::Base' do
-        expect(ActiveRecord::Base.descendants).to include(model)
-      end if specs.include?(:is_an_active_record)
-
-      it 'is instanciable' do
-        instance = model.new
-        expect(instance).to be_a(model)
-      end if specs.include?(:is_instanciable)
-
-      it 'is valid with correct attribute values' do
-        instance = build(model.to_s.tableize.singularize.underscore.tr('/', '_'))
-        
-        instance.valid?
-        expect(instance.errors.full_messages).to eq([])
-      end if specs.include?(:valid_with_correct_attributes)
-
-      it 'is not valid with empty attributes' do
-        instance = model.new
-        expect(instance).not_to be_valid
-      end if specs.include?(:not_valid_with_empty_attributes)
-
-      it 'saves with valid attributes' do
-        instance = build(model.to_s.tableize.singularize.underscore.tr('/', '_'))
-        expect(instance.save).to be_truthy
-        expect(instance).to be_persisted
-      end if specs.include?(:saves_with_valid_attributes)
-    end
-  end
-end

data/spec/models/i18n_spec.rb

@@ -1,41 +0,0 @@
-require 'rails_helper'
-
-RSpec.describe 'Translations', type: :model do
-  {
-    Cmor::Files::Folder     => {},
-    Cmor::Files::FileDetail => {},
-  }.each do |model, options|
-    I18n.available_locales.each do |locale|
-      I18n.locale = locale
-
-      describe "for locale #{locale}:" do
-        describe "#{model} translations" do
-          it 'include one' do
-            I18n.locale = locale
-            i18n_key = ['activerecord', 'models', model.name.underscore].join('.')
-            i18n_options = {}
-            expect(I18n.translate!(i18n_key, options)[:one]).to be_a(String)
-          end
-
-          it 'include other' do
-            I18n.locale = locale
-            i18n_key = ['activerecord', 'models', model.name.underscore].join('.')
-            i18n_options = {}
-            expect(I18n.translate!(i18n_key, options)[:other]).to be_a(String)
-          end
-
-          describe 'for attributes' do
-
-            model.column_names.each do |column_name|
-              it "include #{column_name}" do
-                I18n.locale = locale
-                i18n_key = ['activerecord', 'attributes', model.name.underscore, column_name].join('.')
-                expect(I18n.translate!(i18n_key)).to be_a(String)
-              end
-            end
-          end
-        end
-      end
-    end
-  end
-end

data/spec/rails_helper.rb

@@ -1,62 +0,0 @@
-# This file is copied to spec/ when you run 'rails generate rspec:install'
-require 'spec_helper'
-ENV['RAILS_ENV'] ||= 'test'
-require File.expand_path('../dummy/config/environment', __FILE__)
-# Prevent database truncation if the environment is production
-abort("The Rails environment is running in production mode!") if Rails.env.production?
-require 'rspec/rails'
-# Add additional requires below this line. Rails is not loaded until this point!
-
-# Requires supporting ruby files with custom matchers and macros, etc, in
-# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
-# run as spec files by default. This means that files in spec/support that end
-# in _spec.rb will both be required and run as specs, causing the specs to be
-# run twice. It is recommended that you do not name files matching this glob to
-# end with _spec.rb. You can configure this pattern with the --pattern
-# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
-#
-# The following line is provided for convenience purposes. It has the downside
-# of increasing the boot-up time by auto-requiring all files in the support
-# directory. Alternatively, in the individual `*_spec.rb` files, manually
-# require only the support files necessary.
-#
-# Dir[Rails.root.join('spec', 'support', '**', '*.rb')].each { |f| require f }
-Dir[Cmor::Files::Engine.root.join('spec', 'support', '**', '*.rb')].each { |f| require f }
-
-# Checks for pending migrations and applies them before tests are run.
-# If you are not using ActiveRecord, you can remove these lines.
-# begin
-#   ActiveRecord::Migration.maintain_test_schema!
-# rescue ActiveRecord::PendingMigrationError => e
-#   puts e.to_s.strip
-#   exit 1
-# end
-RSpec.configure do |config|
-  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
-  config.fixture_path = "#{::Rails.root}/spec/fixtures"
-
-  # If you're not using ActiveRecord, or you'd prefer not to run each of your
-  # examples within a transaction, remove the following line or assign false
-  # instead of true.
-  config.use_transactional_fixtures = true
-
-  # RSpec Rails can automatically mix in different behaviours to your tests
-  # based on their file location, for example enabling you to call `get` and
-  # `post` in specs under `spec/controllers`.
-  #
-  # You can disable this behaviour by removing the line below, and instead
-  # explicitly tag your specs with their type, e.g.:
-  #
-  #     RSpec.describe UsersController, :type => :controller do
-  #       # ...
-  #     end
-  #
-  # The different available types are documented in the features, such as in
-  # https://relishapp.com/rspec/rspec-rails/docs
-  config.infer_spec_type_from_file_location!
-
-  # Filter lines from Rails gems in backtraces.
-  config.filter_rails_from_backtrace!
-  # arbitrary gems may also be filtered via:
-  # config.filter_gems_from_backtrace("gem name")
-end

data/spec/spec_helper.rb

@@ -1,96 +0,0 @@
-# This file was generated by the `rails generate rspec:install` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
-  config.shared_context_metadata_behavior = :apply_to_host_groups
-
-# The settings below are suggested to provide a good initial experience
-# with RSpec, but feel free to customize to your heart's content.
-=begin
-  # This allows you to limit a spec run to individual examples or groups
-  # you care about by tagging them with `:focus` metadata. When nothing
-  # is tagged with `:focus`, all examples get run. RSpec also provides
-  # aliases for `it`, `describe`, and `context` that include `:focus`
-  # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  config.filter_run_when_matching :focus
-
-  # Allows RSpec to persist some state between runs in order to support
-  # the `--only-failures` and `--next-failure` CLI options. We recommend
-  # you configure your source control system to ignore this file.
-  config.example_status_persistence_file_path = "spec/examples.txt"
-
-  # Limits the available syntax to the non-monkey patched syntax that is
-  # recommended. For more details, see:
-  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  config.disable_monkey_patching!
-
-  # Many RSpec users commonly either run the entire suite or an individual
-  # file, and it's useful to allow more verbose output when running an
-  # individual spec file.
-  if config.files_to_run.one?
-    # Use the documentation formatter for detailed output,
-    # unless a formatter has already been configured
-    # (e.g. via a command-line flag).
-    config.default_formatter = "doc"
-  end
-
-  # Print the 10 slowest examples and example groups at the
-  # end of the spec run, to help surface which specs are running
-  # particularly slow.
-  config.profile_examples = 10
-
-  # Run specs in random order to surface order dependencies. If you find an
-  # order dependency and want to debug it, you can fix the order by providing
-  # the seed, which is printed after each run.
-  #     --seed 1234
-  config.order = :random
-
-  # Seed global randomization in this process using the `--seed` CLI option.
-  # Setting this allows you to use `--seed` to deterministically reproduce
-  # test failures related to randomization by passing the same `--seed` value
-  # as the one that triggered the failure.
-  Kernel.srand config.seed
-=end
-end

data/spec/support/capybara.rb

@@ -1 +0,0 @@
-require 'capybara'

data/spec/support/factory_bot.rb

@@ -1,5 +0,0 @@
-require 'factory_bot_rails'
-
-RSpec.configure do |config|
-  config.include FactoryBot::Syntax::Methods
-end

data/spec/support/rao-shoulda_matchers.rb

@@ -1,5 +0,0 @@
-require 'rao/shoulda/matchers'
-
-RSpec.configure do |config|
-  config.include Rao::Shoulda::Matchers, type: :feature
-end

data/spec/support/shoulda_matchers.rb

@@ -1,8 +0,0 @@
-require 'shoulda-matchers'
-
-Shoulda::Matchers.configure do |config|
-  config.integrate do |with|
-    with.test_framework :rspec
-    with.library :rails
-  end
-end