cloudsmith-api 0.53.1 → 0.57.1

data/vendor/bundle/ruby/2.6.0/gems/ethon-0.12.0/lib/ethon/curls/settings.rb

@@ -1,9 +0,0 @@
-module Ethon
-  module Curl
-    callback :callback, [:pointer, :size_t, :size_t, :pointer], :size_t
-    callback :debug_callback, [:pointer, :debug_info_type, :pointer, :size_t, :pointer], :int
-    callback :progress_callback, [:pointer, :long_long, :long_long, :long_long, :long_long], :int
-    ffi_lib_flags :now, :global
-    ffi_lib ['libcurl', 'libcurl.so.4']
-  end
-end

data/vendor/bundle/ruby/2.6.0/gems/ethon-0.12.0/lib/ethon/easy.rb

@@ -1,315 +0,0 @@
-require 'ethon/easy/informations'
-require 'ethon/easy/features'
-require 'ethon/easy/callbacks'
-require 'ethon/easy/options'
-require 'ethon/easy/header'
-require 'ethon/easy/util'
-require 'ethon/easy/params'
-require 'ethon/easy/form'
-require 'ethon/easy/http'
-require 'ethon/easy/operations'
-require 'ethon/easy/response_callbacks'
-require 'ethon/easy/debug_info'
-require 'ethon/easy/mirror'
-
-module Ethon
-
-  # This is the class representing the libcurl easy interface
-  # See http://curl.haxx.se/libcurl/c/libcurl-easy.html for more informations.
-  #
-  # @example You can access the libcurl easy interface through this class, every request is based on it. The simplest setup looks like that:
-  #
-  #   e = Ethon::Easy.new(url: "www.example.com")
-  #   e.perform
-  #   #=> :ok
-  #
-  # @example You can the reuse this Easy for the next request:
-  #
-  #   e.reset # reset easy handle
-  #   e.url = "www.google.com"
-  #   e.followlocation = true
-  #   e.perform
-  #   #=> :ok
-  #
-  # @see initialize
-  class Easy
-    include Ethon::Easy::Informations
-    include Ethon::Easy::Callbacks
-    include Ethon::Easy::Options
-    include Ethon::Easy::Header
-    include Ethon::Easy::Http
-    include Ethon::Easy::Operations
-    include Ethon::Easy::ResponseCallbacks
-    extend Ethon::Easy::Features
-
-    # Returns the curl return code.
-    #
-    # @return [ Symbol ] The return code.
-    #   * :ok: All fine. Proceed as usual.
-    #   * :unsupported_protocol: The URL you passed to libcurl used a
-    #     protocol that this libcurl does not support. The support
-    #     might be a compile-time option that you didn't use, it can
-    #     be a misspelled protocol string or just a protocol
-    #     libcurl has no code for.
-    #   * :failed_init: Very early initialization code failed. This
-    #     is likely to be an internal error or problem, or a
-    #     resource problem where something fundamental couldn't
-    #     get done at init time.
-    #   * :url_malformat: The URL was not properly formatted.
-    #   * :not_built_in: A requested feature, protocol or option
-    #     was not found built-in in this libcurl due to a build-time
-    #     decision. This means that a feature or option was not enabled
-    #     or explicitly disabled when libcurl was built and in
-    #     order to get it to function you have to get a rebuilt libcurl.
-    #   * :couldnt_resolve_proxy: Couldn't resolve proxy. The given
-    #     proxy host could not be resolved.
-    #   * :couldnt_resolve_host: Couldn't resolve host. The given remote
-    #     host was not resolved.
-    #   * :couldnt_connect: Failed to connect() to host or proxy.
-    #   * :ftp_weird_server_reply: After connecting to a FTP server,
-    #     libcurl expects to get a certain reply back. This error
-    #     code implies that it got a strange or bad reply. The given
-    #     remote server is probably not an OK FTP server.
-    #   * :remote_access_denied: We were denied access to the resource
-    #     given in the URL. For FTP, this occurs while trying to
-    #     change to the remote directory.
-    #   * :ftp_accept_failed: While waiting for the server to connect
-    #     back when an active FTP session is used, an error code was
-    #     sent over the control connection or similar.
-    #   * :ftp_weird_pass_reply: After having sent the FTP password to
-    #     the server, libcurl expects a proper reply. This error code
-    #     indicates that an unexpected code was returned.
-    #   * :ftp_accept_timeout: During an active FTP session while
-    #     waiting for the server to connect, the CURLOPT_ACCEPTTIMOUT_MS
-    #     (or the internal default) timeout expired.
-    #   * :ftp_weird_pasv_reply: libcurl failed to get a sensible result
-    #     back from the server as a response to either a PASV or a
-    #     EPSV command. The server is flawed.
-    #   * :ftp_weird_227_format: FTP servers return a 227-line as a response
-    #     to a PASV command. If libcurl fails to parse that line,
-    #     this return code is passed back.
-    #   * :ftp_cant_get_host: An internal failure to lookup the host used
-    #     for the new connection.
-    #   * :ftp_couldnt_set_type: Received an error when trying to set
-    #     the transfer mode to binary or ASCII.
-    #   * :partial_file: A file transfer was shorter or larger than
-    #     expected. This happens when the server first reports an expected
-    #     transfer size, and then delivers data that doesn't match the
-    #     previously given size.
-    #   * :ftp_couldnt_retr_file: This was either a weird reply to a
-    #     'RETR' command or a zero byte transfer complete.
-    #   * :quote_error: When sending custom "QUOTE" commands to the
-    #     remote server, one of the commands returned an error code that
-    #     was 400 or higher (for FTP) or otherwise indicated unsuccessful
-    #     completion of the command.
-    #   * :http_returned_error: This is returned if CURLOPT_FAILONERROR is
-    #     set TRUE and the HTTP server returns an error code that is >= 400.
-    #   * :write_error: An error occurred when writing received data to a
-    #     local file, or an error was returned to libcurl from a write callback.
-    #   * :upload_failed: Failed starting the upload. For FTP, the server
-    #     typically denied the STOR command. The error buffer usually
-    #     contains the server's explanation for this.
-    #   * :read_error: There was a problem reading a local file or an error
-    #     returned by the read callback.
-    #   * :out_of_memory: A memory allocation request failed. This is serious
-    #     badness and things are severely screwed up if this ever occurs.
-    #   * :operation_timedout: Operation timeout. The specified time-out
-    #     period was reached according to the conditions.
-    #   * :ftp_port_failed: The FTP PORT command returned error. This mostly
-    #     happens when you haven't specified a good enough address for
-    #     libcurl to use. See CURLOPT_FTPPORT.
-    #   * :ftp_couldnt_use_rest: The FTP REST command returned error. This
-    #     should never happen if the server is sane.
-    #   * :range_error: The server does not support or accept range requests.
-    #   * :http_post_error: This is an odd error that mainly occurs due to
-    #     internal confusion.
-    #   * :ssl_connect_error: A problem occurred somewhere in the SSL/TLS
-    #     handshake. You really want the error buffer and read the message
-    #     there as it pinpoints the problem slightly more. Could be
-    #     certificates (file formats, paths, permissions), passwords, and others.
-    #   * :bad_download_resume: The download could not be resumed because
-    #     the specified offset was out of the file boundary.
-    #   * :file_couldnt_read_file: A file given with FILE:// couldn't be
-    #     opened. Most likely because the file path doesn't identify an
-    #     existing file. Did you check file permissions?
-    #   * :ldap_cannot_bind: LDAP cannot bind. LDAP bind operation failed.
-    #   * :ldap_search_failed: LDAP search failed.
-    #   * :function_not_found: Function not found. A required zlib function was not found.
-    #   * :aborted_by_callback: Aborted by callback. A callback returned
-    #     "abort" to libcurl.
-    #   * :bad_function_argument: Internal error. A function was called with
-    #     a bad parameter.
-    #   * :interface_failed: Interface error. A specified outgoing interface
-    #     could not be used. Set which interface to use for outgoing
-    #     connections' source IP address with CURLOPT_INTERFACE.
-    #   * :too_many_redirects: Too many redirects. When following redirects,
-    #     libcurl hit the maximum amount. Set your limit with CURLOPT_MAXREDIRS.
-    #   * :unknown_option: An option passed to libcurl is not recognized/known.
-    #     Refer to the appropriate documentation. This is most likely a
-    #     problem in the program that uses libcurl. The error buffer might
-    #     contain more specific information about which exact option it concerns.
-    #   * :telnet_option_syntax: A telnet option string was Illegally formatted.
-    #   * :peer_failed_verification: The remote server's SSL certificate or
-    #     SSH md5 fingerprint was deemed not OK.
-    #   * :got_nothing: Nothing was returned from the server, and under the
-    #     circumstances, getting nothing is considered an error.
-    #   * :ssl_engine_notfound: The specified crypto engine wasn't found.
-    #   * :ssl_engine_setfailed: Failed setting the selected SSL crypto engine as default!
-    #   * :send_error: Failed sending network data.
-    #   * :recv_error: Failure with receiving network data.
-    #   * :ssl_certproblem: problem with the local client certificate.
-    #   * :ssl_cipher: Couldn't use specified cipher.
-    #   * :ssl_cacert: Peer certificate cannot be authenticated with known CA certificates.
-    #   * :bad_content_encoding: Unrecognized transfer encoding.
-    #   * :ldap_invalid_url: Invalid LDAP URL.
-    #   * :filesize_exceeded: Maximum file size exceeded.
-    #   * :use_ssl_failed: Requested FTP SSL level failed.
-    #   * :send_fail_rewind: When doing a send operation curl had to rewind the data to
-    #     retransmit, but the rewinding operation failed.
-    #   * :ssl_engine_initfailed: Initiating the SSL Engine failed.
-    #   * :login_denied: The remote server denied curl to login
-    #   * :tftp_notfound: File not found on TFTP server.
-    #   * :tftp_perm: Permission problem on TFTP server.
-    #   * :remote_disk_full: Out of disk space on the server.
-    #   * :tftp_illegal: Illegal TFTP operation.
-    #   * :tftp_unknownid: Unknown TFTP transfer ID.
-    #   * :remote_file_exists: File already exists and will not be overwritten.
-    #   * :tftp_nosuchuser: This error should never be returned by a properly
-    #     functioning TFTP server.
-    #   * :conv_failed: Character conversion failed.
-    #   * :conv_reqd: Caller must register conversion callbacks.
-    #   * :ssl_cacert_badfile: Problem with reading the SSL CA cert (path? access rights?):
-    #   * :remote_file_not_found: The resource referenced in the URL does not exist.
-    #   * :ssh: An unspecified error occurred during the SSH session.
-    #   * :ssl_shutdown_failed: Failed to shut down the SSL connection.
-    #   * :again: Socket is not ready for send/recv wait till it's ready and try again.
-    #     This return code is only returned from curl_easy_recv(3) and curl_easy_send(3)
-    #   * :ssl_crl_badfile: Failed to load CRL file
-    #   * :ssl_issuer_error: Issuer check failed
-    #   * :ftp_pret_failed: The FTP server does not understand the PRET command at
-    #     all or does not support the given argument. Be careful when
-    #     using CURLOPT_CUSTOMREQUEST, a custom LIST command will be sent with PRET CMD
-    #     before PASV as well.
-    #   * :rtsp_cseq_error: Mismatch of RTSP CSeq numbers.
-    #   * :rtsp_session_error: Mismatch of RTSP Session Identifiers.
-    #   * :ftp_bad_file_list: Unable to parse FTP file list (during FTP wildcard downloading).
-    #   * :chunk_failed: Chunk callback reported error.
-    #   * :obsolete: These error codes will never be returned. They were used in an old
-    #     libcurl version and are currently unused.
-    #
-    # @see http://curl.haxx.se/libcurl/c/libcurl-errors.html
-    attr_accessor :return_code
-
-    # Initialize a new Easy.
-    # It initializes curl, if not already done and applies the provided options.
-    # Look into {Ethon::Easy::Options Options} to see what you can provide in the
-    # options hash.
-    #
-    # @example Create a new Easy.
-    #   Easy.new(url: "www.google.de")
-    #
-    # @param [ Hash ] options The options to set.
-    # @option options :headers [ Hash ] Request headers.
-    #
-    # @return [ Easy ] A new Easy.
-    #
-    # @see Ethon::Easy::Options
-    # @see http://curl.haxx.se/libcurl/c/curl_easy_setopt.html
-    def initialize(options = {})
-      Curl.init
-      set_attributes(options)
-      set_callbacks
-    end
-
-    # Set given options.
-    #
-    # @example Set options.
-    #   easy.set_attributes(options)
-    #
-    # @param [ Hash ] options The options.
-    #
-    # @raise InvalidOption
-    #
-    # @see initialize
-    def set_attributes(options)
-      options.each_pair do |key, value|
-        method = "#{key}="
-        unless respond_to?(method)
-          raise Errors::InvalidOption.new(key)
-        end
-        send(method, value)
-      end
-    end
-
-    # Reset easy. This means resetting all options and instance variables.
-    # Also the easy handle is resetted.
-    #
-    # @example Reset.
-    #   easy.reset
-    def reset
-      @url = nil
-      @escape = nil
-      @hash = nil
-      @on_complete = nil
-      @on_headers = nil
-      @on_body = nil
-      @on_progress = nil
-      @procs = nil
-      @mirror = nil
-      Curl.easy_reset(handle)
-      set_callbacks
-    end
-
-    # Clones libcurl session handle. This means that all options that is set in
-    #   the current handle will be set on duplicated handle.
-    def dup
-      e = super
-      e.handle = Curl.easy_duphandle(handle)
-      e.instance_variable_set(:@body_write_callback, nil)
-      e.instance_variable_set(:@header_write_callback, nil)
-      e.instance_variable_set(:@debug_callback, nil)
-      e.instance_variable_set(:@progress_callback, nil)
-      e.set_callbacks
-      e
-    end
-    # Url escapes the value.
-    #
-    # @example Url escape.
-    #   easy.escape(value)
-    #
-    # @param [ String ] value The value to escape.
-    #
-    # @return [ String ] The escaped value.
-    #
-    # @api private
-    def escape(value)
-      string_pointer = Curl.easy_escape(handle, value, value.bytesize)
-      returned_string = string_pointer.read_string
-      Curl.free(string_pointer)
-      returned_string
-    end
-
-    # Returns the informations available through libcurl as
-    # a hash.
-    #
-    # @return [ Hash ] The informations hash.
-    def to_hash
-      Kernel.warn("Ethon: Easy#to_hash is deprecated and will be removed, please use #mirror.")
-      mirror.to_hash
-    end
-
-    def mirror
-      @mirror ||= Mirror.from_easy(self)
-    end
-
-    # Return pretty log out.
-    #
-    # @example Return log out.
-    #   easy.log_inspect
-    #
-    # @return [ String ] The log out.
-    def log_inspect
-      "EASY #{mirror.log_informations.map{|k, v| "#{k}=#{v}"}.flatten.join(' ')}"
-    end
-  end
-end

data/vendor/bundle/ruby/2.6.0/gems/ethon-0.12.0/lib/ethon/easy/callbacks.rb

@@ -1,147 +0,0 @@
-module Ethon
-  class Easy
-
-    # This module contains all the logic around the callbacks,
-    # which are needed to interact with libcurl.
-    #
-    # @api private
-    module Callbacks
-
-      # :nodoc:
-      def self.included(base)
-        base.send(:attr_accessor, *[:response_body, :response_headers, :debug_info])
-      end
-
-      # Set writefunction and headerfunction callback.
-      # They are called by libcurl in order to provide the header and
-      # the body from the request.
-      #
-      # @example Set callbacks.
-      #   easy.set_callbacks
-      def set_callbacks
-        Curl.set_option(:writefunction, body_write_callback, handle)
-        Curl.set_option(:headerfunction, header_write_callback, handle)
-        Curl.set_option(:debugfunction, debug_callback, handle)
-        @response_body = ""
-        @response_headers = ""
-        @headers_called = false
-        @debug_info = Ethon::Easy::DebugInfo.new
-      end
-
-      # Returns the body write callback.
-      #
-      # @example Return the callback.
-      #   easy.body_write_callback
-      #
-      # @return [ Proc ] The callback.
-      def body_write_callback
-        @body_write_callback ||= proc do |stream, size, num, object|
-          headers
-          result = body(chunk = stream.read_string(size * num))
-          @response_body << chunk if result == :unyielded
-          result != :abort ? size * num : -1
-        end
-      end
-
-      # Returns the header write callback.
-      #
-      # @example Return the callback.
-      #   easy.header_write_callback
-      #
-      # @return [ Proc ] The callback.
-      def header_write_callback
-        @header_write_callback ||= proc {|stream, size, num, object|
-          @response_headers << stream.read_string(size * num)
-          size * num
-        }
-      end
-
-      # Returns the debug callback. This callback is currently used
-      # write the raw http request headers.
-      #
-      # @example Return the callback.
-      #   easy.body_write_callback
-      #
-      # @return [ Proc ] The callback.
-      def debug_callback
-        @debug_callback ||= proc {|handle, type, data, size, udata|
-          message = data.read_string(size)
-          @debug_info.add type, message
-          print message unless [:data_in, :data_out].include?(type)
-          0
-        }
-      end
-
-      def set_progress_callback
-        if Curl.version_info[:version] >= "7.32.0"
-          Curl.set_option(:xferinfofunction, progress_callback, handle)
-        else
-          Curl.set_option(:progressfunction, progress_callback, handle)
-        end
-      end
-
-      # Returns the progress callback.
-      #
-      # @example Return the callback.
-      #   easy.progress_callback
-      #
-      # @return [ Proc ] The callback.
-      def progress_callback
-        @progress_callback ||= proc { |_, dltotal, dlnow, ultotal, ulnow|
-          progress(dltotal, dlnow, ultotal, ulnow)
-          0
-        }
-      end
-
-      # Set the read callback. This callback is used by libcurl to
-      # read data when performing a PUT request.
-      #
-      # @example Set the callback.
-      #   easy.set_read_callback("a=1")
-      #
-      # @param [ String ] body The body.
-      def set_read_callback(body)
-        @request_body_read = 0
-        readfunction do |stream, size, num, object|
-          size = size * num
-          body_size = if body.respond_to?(:bytesize)
-            body.bytesize
-          elsif body.respond_to?(:size)
-            body.size
-          elsif body.is_a?(File)
-            File.size(body.path)
-          end
-
-          left = body_size - @request_body_read
-          size = left if size > left
-
-          if size > 0
-            chunk = if body.respond_to?(:byteslice)
-              body.byteslice(@request_body_read, size)
-            elsif body.respond_to?(:read)
-              body.read(size)
-            else
-              body[@request_body_read, size]
-            end
-
-            stream.write_string(
-              chunk, size
-            )
-            @request_body_read += size
-          end
-          size
-        end
-      end
-
-      # Returns the body read callback.
-      #
-      # @example Return the callback.
-      #   easy.read_callback
-      #
-      # @return [ Proc ] The callback.
-      def read_callback
-        @read_callback
-      end
-    end
-  end
-end