cloudsmith-api 0.21.4 → 0.30.7

data/vendor/bundle/ruby/2.3.0/gems/ffi-1.9.18/ext/ffi_c/libffi/man/ffi.3

@@ -1,31 +0,0 @@
-.Dd February 15, 2008
-.Dt FFI 3
-.Sh NAME
-.Nm FFI
-.Nd Foreign Function Interface
-.Sh LIBRARY
-libffi, -lffi
-.Sh SYNOPSIS
-.In ffi.h
-.Ft ffi_status
-.Fo ffi_prep_cif
-.Fa "ffi_cif *cif"
-.Fa "ffi_abi abi"
-.Fa "unsigned int nargs"
-.Fa "ffi_type *rtype"
-.Fa "ffi_type **atypes"
-.Fc
-.Ft void
-.Fo ffi_call
-.Fa "ffi_cif *cif"
-.Fa "void (*fn)(void)"
-.Fa "void *rvalue"
-.Fa "void **avalue"
-.Fc
-.Sh DESCRIPTION
-The foreign function interface provides a mechanism by which a function can
-generate a call to another function at runtime without requiring knowledge of
-the called function's interface at compile time.
-.Sh SEE ALSO
-.Xr ffi_prep_cif 3 ,
-.Xr ffi_call 3

data/vendor/bundle/ruby/2.3.0/gems/ffi-1.9.18/ext/ffi_c/libffi/man/ffi_prep_cif.3

@@ -1,66 +0,0 @@
-.Dd February 15, 2008
-.Dt ffi_prep_cif 3
-.Sh NAME
-.Nm ffi_prep_cif
-.Nd Prepare a
-.Nm ffi_cif
-structure for use with
-.Nm ffi_call 
-.
-.Sh SYNOPSIS
-.In ffi.h
-.Ft ffi_status
-.Fo ffi_prep_cif
-.Fa "ffi_cif *cif"
-.Fa "ffi_abi abi"
-.Fa "unsigned int nargs"
-.Fa "ffi_type *rtype"
-.Fa "ffi_type **atypes"
-.Fc
-.Sh DESCRIPTION
-The
-.Nm ffi_prep_cif
-function prepares a
-.Nm ffi_cif
-structure for use with 
-.Nm ffi_call
-.
-.Fa abi
-specifies a set of calling conventions to use.
-.Fa atypes
-is an array of
-.Fa nargs
-pointers to
-.Nm ffi_type
-structs that describe the data type, size and alignment of each argument.
-.Fa rtype
-points to an
-.Nm ffi_type
-that describes the data type, size and alignment of the
-return value.
-.Sh RETURN VALUES
-Upon successful completion,
-.Nm ffi_prep_cif
-returns
-.Nm FFI_OK .
-It will return
-.Nm FFI_BAD_TYPEDEF
-if
-.Fa cif
-is
-.Nm NULL
-or
-.Fa atypes
-or
-.Fa rtype
-is malformed. If
-.Fa abi
-does not refer to a valid ABI,
-.Nm FFI_BAD_ABI
-will be returned. Available ABIs are
-defined in
-.Nm <ffitarget.h>
-.
-.Sh SEE ALSO
-.Xr ffi 3 ,
-.Xr ffi_call 3 

data/vendor/bundle/ruby/2.3.0/gems/ffi-1.9.18/ext/ffi_c/libffi/mdate-sh

@@ -1,201 +0,0 @@
-#!/bin/sh
-# Get modification time of a file or directory and pretty-print it.
-
-scriptversion=2005-06-29.22
-
-# Copyright (C) 1995, 1996, 1997, 2003, 2004, 2005 Free Software
-# Foundation, Inc.
-# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-case $1 in
-  '')
-     echo "$0: No file.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: mdate-sh [--help] [--version] FILE
-
-Pretty-print the modification time of FILE.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "mdate-sh $scriptversion"
-    exit $?
-    ;;
-esac
-
-# Prevent date giving response in another language.
-LANG=C
-export LANG
-LC_ALL=C
-export LC_ALL
-LC_TIME=C
-export LC_TIME
-
-# GNU ls changes its time format in response to the TIME_STYLE
-# variable.  Since we cannot assume `unset' works, revert this
-# variable to its documented default.
-if test "${TIME_STYLE+set}" = set; then
-  TIME_STYLE=posix-long-iso
-  export TIME_STYLE
-fi
-
-save_arg1=$1
-
-# Find out how to get the extended ls output of a file or directory.
-if ls -L /dev/null 1>/dev/null 2>&1; then
-  ls_command='ls -L -l -d'
-else
-  ls_command='ls -l -d'
-fi
-
-# A `ls -l' line looks as follows on OS/2.
-#  drwxrwx---        0 Aug 11  2001 foo
-# This differs from Unix, which adds ownership information.
-#  drwxrwx---   2 root  root      4096 Aug 11  2001 foo
-#
-# To find the date, we split the line on spaces and iterate on words
-# until we find a month.  This cannot work with files whose owner is a
-# user named `Jan', or `Feb', etc.  However, it's unlikely that `/'
-# will be owned by a user whose name is a month.  So we first look at
-# the extended ls output of the root directory to decide how many
-# words should be skipped to get the date.
-
-# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
-set x`ls -l -d /`
-
-# Find which argument is the month.
-month=
-command=
-until test $month
-do
-  shift
-  # Add another shift to the command.
-  command="$command shift;"
-  case $1 in
-    Jan) month=January; nummonth=1;;
-    Feb) month=February; nummonth=2;;
-    Mar) month=March; nummonth=3;;
-    Apr) month=April; nummonth=4;;
-    May) month=May; nummonth=5;;
-    Jun) month=June; nummonth=6;;
-    Jul) month=July; nummonth=7;;
-    Aug) month=August; nummonth=8;;
-    Sep) month=September; nummonth=9;;
-    Oct) month=October; nummonth=10;;
-    Nov) month=November; nummonth=11;;
-    Dec) month=December; nummonth=12;;
-  esac
-done
-
-# Get the extended ls output of the file or directory.
-set dummy x`eval "$ls_command \"\$save_arg1\""`
-
-# Remove all preceding arguments
-eval $command
-
-# Because of the dummy argument above, month is in $2.
-#
-# On a POSIX system, we should have
-#
-# $# = 5
-# $1 = file size
-# $2 = month
-# $3 = day
-# $4 = year or time
-# $5 = filename
-#
-# On Darwin 7.7.0 and 7.6.0, we have
-#
-# $# = 4
-# $1 = day
-# $2 = month
-# $3 = year or time
-# $4 = filename
-
-# Get the month.
-case $2 in
-  Jan) month=January; nummonth=1;;
-  Feb) month=February; nummonth=2;;
-  Mar) month=March; nummonth=3;;
-  Apr) month=April; nummonth=4;;
-  May) month=May; nummonth=5;;
-  Jun) month=June; nummonth=6;;
-  Jul) month=July; nummonth=7;;
-  Aug) month=August; nummonth=8;;
-  Sep) month=September; nummonth=9;;
-  Oct) month=October; nummonth=10;;
-  Nov) month=November; nummonth=11;;
-  Dec) month=December; nummonth=12;;
-esac
-
-case $3 in
-  ???*) day=$1;;
-  *) day=$3; shift;;
-esac
-
-# Here we have to deal with the problem that the ls output gives either
-# the time of day or the year.
-case $3 in
-  *:*) set `date`; eval year=\$$#
-       case $2 in
-	 Jan) nummonthtod=1;;
-	 Feb) nummonthtod=2;;
-	 Mar) nummonthtod=3;;
-	 Apr) nummonthtod=4;;
-	 May) nummonthtod=5;;
-	 Jun) nummonthtod=6;;
-	 Jul) nummonthtod=7;;
-	 Aug) nummonthtod=8;;
-	 Sep) nummonthtod=9;;
-	 Oct) nummonthtod=10;;
-	 Nov) nummonthtod=11;;
-	 Dec) nummonthtod=12;;
-       esac
-       # For the first six month of the year the time notation can also
-       # be used for files modified in the last year.
-       if (expr $nummonth \> $nummonthtod) > /dev/null;
-       then
-	 year=`expr $year - 1`
-       fi;;
-  *) year=$3;;
-esac
-
-# The result.
-echo $day $month $year
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:

data/vendor/bundle/ruby/2.3.0/gems/ffi-1.9.18/ext/ffi_c/libffi/missing

@@ -1,376 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar*)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar*)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End: