cisco_node_utils 1.3.0 → 1.4.0

data/lib/cisco_node_utils/cmd_ref/aaa_authorization_service.yaml

@@ -19,6 +19,20 @@ method:
   set_value: "%s aaa authorization %s %s local"
   default_value: :local
 
+remove_local_auth:
+  # Used for determining if removal of authentication method
+  # 'local' is permitted.
+  # TBD: remove local should be allowed on all platforms.
+  #   Change once CSCva88188 is resolved
+  kind: boolean
+  N3k: &remove_local_allowed
+    default_only: true
+  N9k: *remove_local_allowed
+  N8k: *remove_local_allowed
+  N5k: *remove_local_allowed
+  N6k: *remove_local_allowed
+  N7k: *remove_local_allowed
+
 services:
   get_command: "show run aaa all"
   get_value: '/^aaa authorization (\S+) (\S+) .*(?:local)? ?$/'

data/lib/cisco_node_utils/cmd_ref/bfd_global.yaml

@@ -0,0 +1,117 @@
+# bfd_global
+---
+_exclude: [ios_xr]
+
+_template:
+  get_command: "show running-config bfd all"
+  context: ~
+
+echo_interface:
+  kind: string
+  get_value: '/^bfd echo-interface (.*)$/'
+  set_value: '<state> bfd echo-interface <intf>'
+  default_value: false
+
+echo_rx_interval:
+  _exclude: [N5k, N6k]
+  kind: int
+  get_value: '/^bfd echo-rx-interval (\d+)$/'
+  set_value: '<state> bfd echo-rx-interval <rxi>'
+  N3k:
+    default_value: 250
+  else:
+    default_value: 50
+
+fabricpath_interval:
+  _exclude: [N3k, N8k, N9k]
+  get_value: '/^bfd fabricpath interval (\d+) min_rx (\d+) multiplier (\d+)$/'
+  set_value: '<state> bfd fabricpath interval <interval> min_rx <min_rx> multiplier <multiplier>'
+  default_value: ['50', '50', '3']
+
+fabricpath_slow_timer:
+  _exclude: [N3k, N8k, N9k]
+  kind: int
+  get_value: '/^bfd fabricpath slow-timer (\d+)$/'
+  set_value: '<state> bfd fabricpath slow-timer <timer>'
+  default_value: 2000
+
+fabricpath_vlan:
+  _exclude: [N3k, N8k, N9k]
+  kind: int
+  get_value: '/^bfd fabricpath vlan (\d+)$/'
+  set_value: '<state> bfd fabricpath vlan <vlan>'
+  default_value: 1
+
+interval:
+  _exclude: [N8k, N9k] # TBD: bug on n8k, n9k this is not working now
+  get_value: '/^bfd interval (\d+) min_rx (\d+) multiplier (\d+)$/'
+  set_value: '<state> bfd interval <interval> min_rx <min_rx> multiplier <multiplier>'
+  N3k:
+    default_value: ['250', '250', '3']
+  else:
+    default_value: ['50', '50', '3']
+
+ipv4_echo_rx_interval:
+  _exclude: [N5k, N6k]
+  kind: int
+  get_value: '/^bfd ipv4 echo-rx-interval (\d+)$/'
+  set_value: '<state> bfd ipv4 echo-rx-interval <rxi>'
+  N3k:
+    default_value: 250
+  else:
+    default_value: 50
+
+ipv4_interval:
+  _exclude: [N5k, N6k]
+  get_value: '/^bfd ipv4 interval (\d+) min_rx (\d+) multiplier (\d+)$/'
+  set_value: '<state> bfd ipv4 interval <interval> min_rx <min_rx> multiplier <multiplier>'
+  N3k:
+    default_value: ['250', '250', '3']
+  else:
+    default_value: ['50', '50', '3']
+
+ipv4_slow_timer:
+  _exclude: [N5k, N6k]
+  kind: int
+  get_value: '/^bfd ipv4 slow-timer (\d+)$/'
+  set_value: '<state> bfd ipv4 slow-timer <timer>'
+  default_value: 2000
+
+ipv6_echo_rx_interval:
+  _exclude: [N5k, N6k]
+  kind: int
+  get_value: '/^bfd ipv6 echo-rx-interval (\d+)$/'
+  set_value: '<state> bfd ipv6 echo-rx-interval <rxi>'
+  N3k:
+    default_value: 250
+  else:
+    default_value: 50
+
+ipv6_interval:
+  _exclude: [N5k, N6k]
+  get_value: '/^bfd ipv6 interval (\d+) min_rx (\d+) multiplier (\d+)$/'
+  set_value: '<state> bfd ipv6 interval <interval> min_rx <min_rx> multiplier <multiplier>'
+  N3k:
+    default_value: ['250', '250', '3']
+  else:
+    default_value: ['50', '50', '3']
+
+ipv6_slow_timer:
+  _exclude: [N5k, N6k]
+  kind: int
+  get_value: '/^bfd ipv6 slow-timer (\d+)$/'
+  set_value: '<state> bfd ipv6 slow-timer <timer>'
+  default_value: 2000
+
+slow_timer:
+  kind: int
+  get_value: '/^bfd slow-timer (\d+)$/'
+  set_value: '<state> bfd slow-timer <timer>'
+  default_value: 2000
+
+startup_timer:
+  _exclude: [N5k, N6k, N7k]
+  kind: int
+  get_value: '/^bfd startup-timer (\d+)$/'
+  set_value: '<state> bfd startup-timer <timer>'
+  default_value: 5

data/lib/cisco_node_utils/cmd_ref/bgp.yaml

@@ -272,7 +272,7 @@ nsr:
   set_value: '<state> nsr'
 
 process_initialized:
-  _exclude: [ios_xr, N3k, N7k, N8k, N9k]
+  _exclude: [ios_xr, N3k, N7k, N9k]
   # bgp process initialization state
   kind: boolean
   context: ~
@@ -331,12 +331,12 @@ shutdown:
     default_value: false
 
 suppress_fib_pending:
-  # Note: Does not exist in IOS XR
-  nexus:
-    kind: boolean
-    get_value: 'suppress-fib-pending'
-    set_value: '<state> suppress-fib-pending'
-    default_value: false
+  _exclude: [ios_xr]
+  kind: boolean
+  get_value: '/^(?:no )?suppress-fib-pending$/'
+  set_value: '<state> suppress-fib-pending'
+  default_value: true
+  auto_default: false
 
 timer_bestpath_limit:
   # Note: Does not exist in IOS XR

data/lib/cisco_node_utils/cmd_ref/bgp_neighbor.yaml

@@ -20,6 +20,13 @@ all_neighbors:
     - "(?)vrf <vrf>"
   get_value: '/^neighbor (\S+)$/'
 
+bfd:
+  _exclude: [ios_xr]
+  kind: boolean
+  get_value: '/^bfd$/'
+  set_value: '<state> bfd'
+  default_value: false
+
 capability_negotiation:
   _exclude: [ios_xr]
   auto_default: false

data/lib/cisco_node_utils/cmd_ref/dhcp_relay_global.yaml

@@ -0,0 +1,125 @@
+# dhcp_relay_global
+---
+_exclude: [ios_xr]
+
+_template:
+  get_command: "show running-config dhcp | no-more"
+
+ipv4_information_option:
+  kind: boolean
+  get_value: '/^ip dhcp relay information option$/'
+  set_value: "<state> ip dhcp relay information option"
+  default_value: false
+
+ipv4_information_option_trust:
+  _exclude: [N5k, N6k]
+  kind: boolean
+  get_value: '/^ip dhcp relay information option trust$/'
+  set_value: "<state> ip dhcp relay information option trust"
+  default_value: false
+
+ipv4_information_option_vpn:
+  kind: boolean
+  get_value: '/^ip dhcp relay information option vpn$/'
+  set_value: "<state> ip dhcp relay information option vpn"
+  default_value: false
+
+ipv4_information_trust_all:
+  _exclude: [N5k, N6k]
+  kind: boolean
+  get_value: '/^ip dhcp relay information trust-all$/'
+  set_value: "<state> ip dhcp relay information trust-all"
+  default_value: false
+
+ipv4_relay:
+  kind: boolean
+  get_value: '/^ip dhcp relay$/'
+  set_value: "<state> ip dhcp relay"
+  N3k: &relay_default_true
+    # auto_default is set to false because when
+    # this property is set to false, we do not
+    # find the regex pattern and since the default_value
+    # is true, it should not return true as its real
+    # value is false.
+    auto_default: false
+    default_value: true
+  N5k: &relay_default_false
+    default_value: false
+  N6k: *relay_default_false
+  N7k: *relay_default_true
+  N8k: *relay_default_true
+  N9k: *relay_default_true
+
+ipv4_smart_relay:
+  kind: boolean
+  get_value: '/^ip dhcp smart-relay global$/'
+  set_value: "<state> ip dhcp smart-relay global"
+  default_value: false
+
+ipv4_src_addr_hsrp:
+  _exclude: [N3k, N8k, N9k]
+  kind: boolean
+  get_value: '/^ip dhcp relay source-address hsrp$/'
+  set_value: "<state> ip dhcp relay source-address hsrp"
+  default_value: false
+
+ipv4_src_intf:
+  get_value: '/^ip dhcp relay source-interface (.*)$/'
+  set_value: "<state> ip dhcp relay source-interface <intf>"
+  default_value: false
+
+ipv4_sub_option_circuit_id_custom:
+  _exclude: [N7k, N8k]
+  kind: boolean
+  get_value: '/^ip dhcp relay sub-option circuit-id customized$/'
+  set_value: "<state> ip dhcp relay sub-option circuit-id customized"
+  default_value: false
+
+ipv4_sub_option_circuit_id_string:
+  _exclude: [N5k, N6k, N7k, N8k, N9k]
+  get_value: '/^ip dhcp relay sub-option circuit-id format-type string format (.*)$/'
+  set_value: "<state> ip dhcp relay sub-option circuit-id format-type string <format> <word>"
+  default_value: false
+
+ipv4_sub_option_cisco:
+  kind: boolean
+  get_value: '/^ip dhcp relay sub-option type cisco$/'
+  set_value: "<state> ip dhcp relay sub-option type cisco"
+  default_value: false
+
+ipv6_option_cisco:
+  _exclude: [N5k, N6k]
+  kind: boolean
+  get_value: '/^ipv6 dhcp relay option type cisco$/'
+  set_value: "<state> ipv6 dhcp relay option type cisco"
+  default_value: false
+
+ipv6_option_vpn:
+  kind: boolean
+  get_value: '/^ipv6 dhcp relay option vpn$/'
+  set_value: "<state> ipv6 dhcp relay option vpn"
+  default_value: false
+
+ipv6_relay:
+  kind: boolean
+  get_value: '/^ipv6 dhcp relay$/'
+  set_value: "<state> ipv6 dhcp relay"
+  N3k: &v6_relay_default_true
+    # auto_default is set to false because when
+    # this property is set to false, we do not
+    # find the regex pattern and since the default_value
+    # is true, it should not return true as its real
+    # value is false.
+    auto_default: false
+    default_value: true
+  N5k: &v6_relay_default_false
+    default_value: false
+  N6k: *v6_relay_default_false
+  N7k: *v6_relay_default_true
+  N8k: *v6_relay_default_true
+  N9k: *v6_relay_default_true
+
+ipv6_src_intf:
+  get_value: '/^ipv6 dhcp relay source-interface (.*)$/'
+  set_value: "<state> ipv6 dhcp relay source-interface <intf>"
+  default_value: false

data/lib/cisco_node_utils/cmd_ref/feature.yaml

@@ -5,11 +5,21 @@ _exclude: [ios_xr]
 _template:
   get_command: "show running | i ^feature"
 
+bfd:
+  kind: boolean
+  get_value: '/^feature bfd$/'
+  set_value: "feature bfd"
+
 bgp:
   kind: boolean
   get_value: '/^feature bgp$/'
   set_value: "feature bgp"
 
+dhcp:
+  kind: boolean
+  get_value: '/^feature dhcp$/'
+  set_value: "feature dhcp"
+
 fabric:
   _exclude: [N3k, N8k, N9k]
   get_command: "show feature-set"

data/lib/cisco_node_utils/cmd_ref/interface.yaml

@@ -21,6 +21,13 @@ all_interfaces:
   get_context: ~
   get_value: '/^interface (.*)/'
 
+bfd_echo:
+  _exclude: [ios_xr]
+  kind: boolean
+  get_value: '/^(?:no )?bfd echo$/'
+  set_value: '<state> bfd echo'
+  default_value: true
+
 capabilities:
   _exclude: [ios_xr]
   multiple:
@@ -125,6 +132,47 @@ ipv4_arp_timeout:
 ipv4_arp_timeout_non_vlan_interfaces:
   default_only: ~
 
+ipv4_dhcp_relay_addr:
+  _exclude: [ios_xr]
+  multiple:
+  get_value: '/^ip dhcp relay address (.*) $/'
+  set_value: "<state> ip dhcp relay address <addr>"
+  default_value: []
+
+ipv4_dhcp_relay_info_trust:
+  _exclude: [ios_xr, N5k, N6k]
+  kind: boolean
+  get_value: '/^ip dhcp relay information trusted$/'
+  set_value: "<state> ip dhcp relay information trusted"
+  default_value: false
+
+ipv4_dhcp_relay_src_addr_hsrp:
+  _exclude: [ios_xr, N3k, N8k, N9k]
+  kind: boolean
+  get_value: '/^ip dhcp relay source-address hsrp$/'
+  set_value: "<state> ip dhcp relay source-address hsrp"
+  default_value: false
+
+ipv4_dhcp_relay_src_intf:
+  _exclude: [ios_xr]
+  get_value: '/^ip dhcp relay source-interface (.*)$/'
+  set_value: "<state> ip dhcp relay source-interface <intf>"
+  default_value: false
+
+ipv4_dhcp_relay_subnet_broadcast:
+  _exclude: [ios_xr]
+  kind: boolean
+  get_value: '/^ip dhcp relay subnet-broadcast$/'
+  set_value: "<state> ip dhcp relay subnet-broadcast"
+  default_value: false
+
+ipv4_dhcp_smart_relay:
+  _exclude: [ios_xr]
+  kind: boolean
+  get_value: '/^ip dhcp smart-relay$/'
+  set_value: "<state> ip dhcp smart-relay"
+  default_value: false
+
 ipv4_forwarding:
   _exclude: [ios_xr]
   kind: boolean
@@ -191,6 +239,19 @@ ipv6_acl_out:
     set_value: "<state> ipv6 traffic-filter <acl> out"
   default_value: ""
 
+ipv6_dhcp_relay_addr:
+  _exclude: [ios_xr]
+  multiple:
+  get_value: '/^ipv6 dhcp relay address (.*)$/'
+  set_value: "<state> ipv6 dhcp relay address <addr>"
+  default_value: []
+
+ipv6_dhcp_relay_src_intf:
+  _exclude: [ios_xr]
+  get_value: '/^ipv6 dhcp relay source-interface (.*)$/'
+  set_value: "<state> ipv6 dhcp relay source-interface <intf>"
+  default_value: false
+
 mtu_loopback:
   kind: boolean
   default_only: ~
@@ -223,15 +284,20 @@ negotiate_auto_portchannel:
   set_value: "<state> negotiate auto"
   default_value: true
 
-private_vlan_any:
+pvlan_any:
   multiple:
   get_value: '/switchport private-vlan/'
 
-private_vlan_mapping:
+# Be aware of similar vlan-mapping tags:
+# 'vlan_mapping' is the non-pvlan version of this command
+# 'pvlan_mapping' is the SVI private-vlan command
+# 'switchport_pvlan_mapping' is the switchport-pvlan-host command
+# 'switchport_pvlan_mapping_trunk' is the switchport-pvlan-trunk command
+pvlan_mapping:
+  # SVI-only property
   _exclude: [ios_xr, N8k]
-  multiple: true
-  get_value: '/^private-vlan mapping (.*)$/'
-  set_value: "<state> private-vlan mapping <vlans>"
+  get_value: '/^private-vlan mapping (.*)/'
+  set_value: "<state> private-vlan mapping <vlan>"
   default_value: []
 
 shutdown:
@@ -277,6 +343,27 @@ speed:
   else:
     default_value: 'auto'
 
+storm_control_broadcast:
+  _exclude: [ios_xr, N7k]
+  kind: string
+  get_value: '/^storm-control broadcast level (.*)$/'
+  set_value: "<state> storm-control broadcast level <level>"
+  default_value: '100.00'
+
+storm_control_multicast:
+  _exclude: [ios_xr, N7k]
+  kind: string
+  get_value: '/^storm-control multicast level (.*)$/'
+  set_value: "<state> storm-control multicast level <level>"
+  default_value: '100.00'
+
+storm_control_unicast:
+  _exclude: [ios_xr]
+  kind: string
+  get_value: '/^storm-control unicast level (.*)$/'
+  set_value: "<state> storm-control unicast level <level>"
+  default_value: '100.00'
+
 stp_bpdufilter:
   kind: string
   get_value: '/^spanning-tree bpdufilter (.*)$/'
@@ -405,75 +492,80 @@ switchport_mode_port_channel:
   set_value: "<state> switchport mode <mode>"
   default_value: ""
 
-switchport_mode_private_vlan_host:
+switchport_pvlan_host:
+  _exclude: [ios_xr, N8k]
+  kind: boolean
+  get_value: '/^switchport mode private-vlan host$/'
+  set_value: "<state> switchport mode private-vlan host"
+  default_value: false
+
+switchport_pvlan_host_association:
   _exclude: [ios_xr, N8k]
-  get_value: '/^switchport mode private-vlan (.*)$/'
-  set_value: "<state> switchport mode private-vlan <mode>"
-  default_value: :disabled
+  # Note this is NOT a multiple, unlike trunk association.
+  get_value: '/^switchport private-vlan host-association (\d+) (\d+)$/'
+  set_value: "<state> switchport private-vlan host-association <pri> <sec>"
+  default_value: []
 
-switchport_mode_private_vlan_host_association:
+switchport_pvlan_mapping:
   _exclude: [ios_xr, N8k]
-  multiple: true
-  get_value: '/^switchport private-vlan host-association (.*)$/'
-  set_value: "<state> switchport private-vlan host-association <vlan_pr> <vlan_sec>"
+  get_value: '/^switchport private-vlan mapping (\d+) (.*)$/'
+  set_value: "<state> switchport private-vlan mapping <primary> <vlan>"
+  default_value: []
+
+switchport_pvlan_mapping_trunk:
+  _exclude: [ios_xr, N3k, N8k]
+  multiple:
+  get_value: '/^switchport private-vlan mapping trunk (\d+) (.*)$/'
+  set_value: "<state> switchport private-vlan mapping trunk <primary> <range>"
   default_value: []
 
-switchport_mode_private_vlan_host_promiscous:
+switchport_pvlan_promiscuous:
+  _exclude: [ios_xr, N8k]
+  kind: boolean
+  get_value: '/^switchport mode private-vlan promiscuous$/'
+  set_value: "<state> switchport mode private-vlan promiscuous"
+  default_value: false
+
+switchport_pvlan_trunk_allowed_vlan:
   _exclude: [ios_xr, N8k]
   multiple: true
-  get_value: '/^switchport private-vlan mapping (\d+.*)$/'
-  set_value: "<state> switchport private-vlan mapping <vlan_pr> <vlans>"
+  get_value: '/^switchport private-vlan trunk allowed vlan (?:add )?(\S+)$/'
+  set_value: "switchport private-vlan trunk allowed vlan <range>"
+  default_value: 'none'
+
+switchport_pvlan_trunk_association:
+  _exclude: [ios_xr, N3k, N8k]
+  multiple:
+  get_value: '/^switchport private-vlan association trunk (\d+) (\d+)$/'
+  set_value: "<state> switchport private-vlan association trunk <pri> <sec>"
   default_value: []
 
+switchport_pvlan_trunk_native_vlan:
+  _exclude: [ios_xr, N8k]
+  get_value: '/^switchport private-vlan trunk native vlan (.*)$/'
+  set_value: "switchport private-vlan trunk native vlan <vlan>"
+  default_value: '1'
 
-switchport_mode_private_vlan_trunk_promiscuous:
+switchport_pvlan_trunk_promiscuous:
   _exclude: [ios_xr, N3k, N8k]
   kind: boolean
   get_value: '/^switchport mode private-vlan trunk promiscuous$/'
   set_value: "<state> switchport mode private-vlan trunk promiscuous"
   default_value: false
 
-switchport_mode_private_vlan_trunk_secondary:
+switchport_pvlan_trunk_secondary:
   _exclude: [ios_xr, N3k, N8k]
   kind: boolean
   get_value: '/^switchport mode private-vlan trunk secondary$/'
   set_value: "<state> switchport mode private-vlan trunk secondary"
   default_value: false
 
-switchport_private_vlan_association_trunk:
-  _exclude: [ios_xr, N3k, N8k]
-  multiple: true
-  #get_value: '/^switchport private-vlan association trunk (.*) (.*)$/'
-  get_value: '/^switchport private-vlan association trunk (.*)$/'
-  set_value: "<state> switchport private-vlan association trunk <vlan_pr> <vlan>"
-  default_value: []
-
-switchport_private_vlan_mapping_trunk:
-  _exclude: [ios_xr, N3k, N8k]
-  multiple: true
-  get_value: '/^switchport private-vlan mapping trunk (.*)$/'
-  set_value: "<state> switchport private-vlan mapping trunk <vlan_pr> <vlans>"
-  default_value: []
-
-switchport_private_vlan_trunk_allowed_vlan:
-  _exclude: [ios_xr, N8k]
-  multiple: true
-  get_value: '/^switchport private-vlan trunk allowed vlan (.*)$/'
-  set_value: "<state> switchport private-vlan trunk allowed vlan <oper> <vlans>"
-  default_value: []
-
-switchport_private_vlan_trunk_native_vlan:
-  _exclude: [ios_xr, N8k]
-  kind: int
-  get_value: '/^switchport private-vlan trunk native vlan (.*)$/'
-  set_value: "<state> switchport private-vlan trunk native vlan <vlan>"
-  default_value: 1
-
 switchport_trunk_allowed_vlan:
   _exclude: [ios_xr]
-  get_value: '/^switchport trunk allowed vlan (.*)$/'
+  multiple: true
+  get_value: '/^switchport trunk allowed vlan (?:add )?(\S+)$/'
   set_value: "<state> switchport trunk allowed vlan <vlan>"
-  default_value: "1-4094"
+  default_value: '1-4094'
 
 switchport_trunk_native_vlan:
   _exclude: [ios_xr]