chef 18.10.17 → 19.1.164

data/lib/chef/resource/chef_client_trusted_certificate.rb

@@ -1,5 +1,5 @@
 #
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -26,35 +26,35 @@ class Chef
       description "Use the **chef_client_trusted_certificate** resource to add certificates to #{ChefUtils::Dist::Infra::PRODUCT}'s trusted certificate directory. This allows the #{ChefUtils::Dist::Infra::PRODUCT} to communicate with internal encrypted resources without errors."
       introduced "16.5"
       examples <<~DOC
-        **Trust a self signed certificate**:
+      **Trust a self signed certificate**:
 
-        ```ruby
-        chef_client_trusted_certificate 'self-signed.badssl.com' do
-          certificate <<~CERT
-          -----BEGIN CERTIFICATE-----
-          MIIDeTCCAmGgAwIBAgIJAPziuikCTox4MA0GCSqGSIb3DQEBCwUAMGIxCzAJBgNV
-          BAYTAlVTMRMwEQYDVQQIDApDYWxpZm9ybmlhMRYwFAYDVQQHDA1TYW4gRnJhbmNp
-          c2NvMQ8wDQYDVQQKDAZCYWRTU0wxFTATBgNVBAMMDCouYmFkc3NsLmNvbTAeFw0x
-          OTEwMDkyMzQxNTJaFw0yMTEwMDgyMzQxNTJaMGIxCzAJBgNVBAYTAlVTMRMwEQYD
-          VQQIDApDYWxpZm9ybmlhMRYwFAYDVQQHDA1TYW4gRnJhbmNpc2NvMQ8wDQYDVQQK
-          DAZCYWRTU0wxFTATBgNVBAMMDCouYmFkc3NsLmNvbTCCASIwDQYJKoZIhvcNAQEB
-          BQADggEPADCCAQoCggEBAMIE7PiM7gTCs9hQ1XBYzJMY61yoaEmwIrX5lZ6xKyx2
-          PmzAS2BMTOqytMAPgLaw+XLJhgL5XEFdEyt/ccRLvOmULlA3pmccYYz2QULFRtMW
-          hyefdOsKnRFSJiFzbIRMeVXk0WvoBj1IFVKtsyjbqv9u/2CVSndrOfEk0TG23U3A
-          xPxTuW1CrbV8/q71FdIzSOciccfCFHpsKOo3St/qbLVytH5aohbcabFXRNsKEqve
-          ww9HdFxBIuGa+RuT5q0iBikusbpJHAwnnqP7i/dAcgCskgjZjFeEU4EFy+b+a1SY
-          QCeFxxC7c3DvaRhBB0VVfPlkPz0sw6l865MaTIbRyoUCAwEAAaMyMDAwCQYDVR0T
-          BAIwADAjBgNVHREEHDAaggwqLmJhZHNzbC5jb22CCmJhZHNzbC5jb20wDQYJKoZI
-          hvcNAQELBQADggEBAGlwCdbPxflZfYOaukZGCaxYK6gpincX4Lla4Ui2WdeQxE95
-          w7fChXvP3YkE3UYUE7mupZ0eg4ZILr/A0e7JQDsgIu/SRTUE0domCKgPZ8v99k3A
-          vka4LpLK51jHJJK7EFgo3ca2nldd97GM0MU41xHFk8qaK1tWJkfrrfcGwDJ4GQPI
-          iLlm6i0yHq1Qg1RypAXJy5dTlRXlCLd8ufWhhiwW0W75Va5AEnJuqpQrKwl3KQVe
-          wGj67WWRgLfSr+4QG1mNvCZb2CkjZWmxkGPuoP40/y7Yu5OFqxP5tAjj4YixCYTW
-          EVA0pmzIzgBg+JIe3PdRy27T0asgQW/F4TY61Yk=
-          -----END CERTIFICATE-----
-          CERT
-        end
-        ```
+      ```ruby
+      chef_client_trusted_certificate 'self-signed.badssl.com' do
+        certificate <<~CERT
+        -----BEGIN CERTIFICATE-----
+        MIIDeTCCAmGgAwIBAgIJAPziuikCTox4MA0GCSqGSIb3DQEBCwUAMGIxCzAJBgNV
+        BAYTAlVTMRMwEQYDVQQIDApDYWxpZm9ybmlhMRYwFAYDVQQHDA1TYW4gRnJhbmNp
+        c2NvMQ8wDQYDVQQKDAZCYWRTU0wxFTATBgNVBAMMDCouYmFkc3NsLmNvbTAeFw0x
+        OTEwMDkyMzQxNTJaFw0yMTEwMDgyMzQxNTJaMGIxCzAJBgNVBAYTAlVTMRMwEQYD
+        VQQIDApDYWxpZm9ybmlhMRYwFAYDVQQHDA1TYW4gRnJhbmNpc2NvMQ8wDQYDVQQK
+        DAZCYWRTU0wxFTATBgNVBAMMDCouYmFkc3NsLmNvbTCCASIwDQYJKoZIhvcNAQEB
+        BQADggEPADCCAQoCggEBAMIE7PiM7gTCs9hQ1XBYzJMY61yoaEmwIrX5lZ6xKyx2
+        PmzAS2BMTOqytMAPgLaw+XLJhgL5XEFdEyt/ccRLvOmULlA3pmccYYz2QULFRtMW
+        hyefdOsKnRFSJiFzbIRMeVXk0WvoBj1IFVKtsyjbqv9u/2CVSndrOfEk0TG23U3A
+        xPxTuW1CrbV8/q71FdIzSOciccfCFHpsKOo3St/qbLVytH5aohbcabFXRNsKEqve
+        ww9HdFxBIuGa+RuT5q0iBikusbpJHAwnnqP7i/dAcgCskgjZjFeEU4EFy+b+a1SY
+        QCeFxxC7c3DvaRhBB0VVfPlkPz0sw6l865MaTIbRyoUCAwEAAaMyMDAwCQYDVR0T
+        BAIwADAjBgNVHREEHDAaggwqLmJhZHNzbC5jb22CCmJhZHNzbC5jb20wDQYJKoZI
+        hvcNAQELBQADggEBAGlwCdbPxflZfYOaukZGCaxYK6gpincX4Lla4Ui2WdeQxE95
+        w7fChXvP3YkE3UYUE7mupZ0eg4ZILr/A0e7JQDsgIu/SRTUE0domCKgPZ8v99k3A
+        vka4LpLK51jHJJK7EFgo3ca2nldd97GM0MU41xHFk8qaK1tWJkfrrfcGwDJ4GQPI
+        iLlm6i0yHq1Qg1RypAXJy5dTlRXlCLd8ufWhhiwW0W75Va5AEnJuqpQrKwl3KQVe
+        wGj67WWRgLfSr+4QG1mNvCZb2CkjZWmxkGPuoP40/y7Yu5OFqxP5tAjj4YixCYTW
+        EVA0pmzIzgBg+JIe3PdRy27T0asgQW/F4TY61Yk=
+        -----END CERTIFICATE-----
+        CERT
+      end
+      ```
       DOC
 
       property :cert_name, String, name_property: true,

data/lib/chef/resource/chef_gem.rb

@@ -1,6 +1,6 @@
 #
 # Author:: Bryan McLellan <btm@loftninjas.org>
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 # License:: Apache License, Version 2.0
 #
 # Licensed under the Apache License, Version 2.0 (the "License");

data/lib/chef/resource/chef_handler.rb

@@ -1,6 +1,6 @@
 #
 # Author:: Seth Chisamore <schisamo@chef.io>
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -27,149 +27,149 @@ class Chef
       description "Use the **chef_handler** resource to enable handlers during a #{ChefUtils::Dist::Infra::PRODUCT} run. The resource allows arguments to be passed to #{ChefUtils::Dist::Infra::PRODUCT}, which then applies the conditions defined by the custom handler to the node attribute data collected during a #{ChefUtils::Dist::Infra::PRODUCT} run, and then processes the handler based on that data.\nThe **chef_handler** resource is typically defined early in a node's run-list (often being the first item). This ensures that all of the handlers will be available for the entire #{ChefUtils::Dist::Infra::PRODUCT} run."
       introduced "14.0"
       examples <<~'DOC'
-        **Enable the 'MyHandler' handler**
+      **Enable the 'MyHandler' handler**
 
-        The following example shows how to enable a fictional 'MyHandler' handler which is located on disk at `/etc/chef/my_handler.rb`. The handler will be configured to run with Chef Infra Client and will be passed values to the handler's initializer method:
+      The following example shows how to enable a fictional 'MyHandler' handler which is located on disk at `/etc/chef/my_handler.rb`. The handler will be configured to run with Chef Infra Client and will be passed values to the handler's initializer method:
 
-        ```ruby
-        chef_handler 'MyHandler' do
-          source '/etc/chef/my_handler.rb' # the file should already be at this path
-          arguments path: '/var/chef/reports'
-          action :enable
-        end
-        ```
+      ```ruby
+      chef_handler 'MyHandler' do
+        source '/etc/chef/my_handler.rb' # the file should already be at this path
+        arguments path: '/var/chef/reports'
+        action :enable
+      end
+      ```
 
-        **Enable handlers during the compile phase**
+      **Enable handlers during the compile phase**
 
-        ```ruby
-        chef_handler 'Chef::Handler::JsonFile' do
-          source 'chef/handler/json_file'
-          arguments path: '/var/chef/reports'
-          action :enable
-          compile_time true
-        end
-        ```
+      ```ruby
+      chef_handler 'Chef::Handler::JsonFile' do
+        source 'chef/handler/json_file'
+        arguments path: '/var/chef/reports'
+        action :enable
+        compile_time true
+      end
+      ```
 
-        **Handle only exceptions**
+      **Handle only exceptions**
 
-        ```ruby
-        chef_handler 'Chef::Handler::JsonFile' do
-          source 'chef/handler/json_file'
-          arguments path: '/var/chef/reports'
-          type exception: true
-          action :enable
-        end
-        ```
+      ```ruby
+      chef_handler 'Chef::Handler::JsonFile' do
+        source 'chef/handler/json_file'
+        arguments path: '/var/chef/reports'
+        type exception: true
+        action :enable
+      end
+      ```
 
-        **Cookbook Versions (a custom handler)**
+      **Cookbook Versions (a custom handler)**
 
-        [@juliandunn](https://github.com/juliandunn) created a custom report handler that logs all of the cookbooks and cookbook versions that were used during a Chef Infra Client run, and then reports after the run is complete.
+      [@juliandunn](https://github.com/juliandunn) created a custom report handler that logs all of the cookbooks and cookbook versions that were used during a Chef Infra Client run, and then reports after the run is complete.
 
-        cookbook_versions.rb:
+      cookbook_versions.rb:
 
-        The following custom handler defines how cookbooks and cookbook versions that are used during a Chef Infra Client run will be compiled into a report using the `Chef::Log` class in Chef Infra Client:
+      The following custom handler defines how cookbooks and cookbook versions that are used during a Chef Infra Client run will be compiled into a report using the `Chef::Log` class in Chef Infra Client:
 
-        ```ruby
-        require 'chef/log'
+      ```ruby
+      require 'chef/log'
 
-        module Chef
-          class CookbookVersionsHandler < Chef::Handler
-            def report
-              cookbooks = run_context.cookbook_collection
-              Chef::Log.info('Cookbooks and versions run: #{cookbooks.map {|x| x.name.to_s + ' ' + x.version }}')
-            end
+      module Chef
+        class CookbookVersionsHandler < Chef::Handler
+          def report
+            cookbooks = run_context.cookbook_collection
+            Chef::Log.info('Cookbooks and versions run: #{cookbooks.map {|x| x.name.to_s + ' ' + x.version }}')
           end
         end
-        ```
+      end
+      ```
 
-        default.rb:
+      default.rb:
 
-        The following recipe is added to the run-list for every node on which a list of cookbooks and versions will be generated as report output after every Chef Infra Client run.
+      The following recipe is added to the run-list for every node on which a list of cookbooks and versions will be generated as report output after every Chef Infra Client run.
 
-        ```ruby
-        cookbook_file '/etc/chef/cookbook_versions.rb' do
-          source 'cookbook_versions.rb'
-          action :create
-        end
+      ```ruby
+      cookbook_file '/etc/chef/cookbook_versions.rb' do
+        source 'cookbook_versions.rb'
+        action :create
+      end
 
-        chef_handler 'Chef::CookbookVersionsHandler' do
-          source '/etc/chef/cookbook_versions.rb'
-          type report: true
-          action :enable
-        end
-        ```
+      chef_handler 'Chef::CookbookVersionsHandler' do
+        source '/etc/chef/cookbook_versions.rb'
+        type report: true
+        action :enable
+      end
+      ```
 
-        This recipe will generate report output similar to the following:
+      This recipe will generate report output similar to the following:
 
-        ```
-        [2013-11-26T03:11:06+00:00] INFO: Chef Infra Client Run complete in 0.300029878 seconds
-        [2013-11-26T03:11:06+00:00] INFO: Running report handlers
-        [2013-11-26T03:11:06+00:00] INFO: Cookbooks and versions run: ["cookbook_versions_handler 1.0.0"]
-        [2013-11-26T03:11:06+00:00] INFO: Report handlers complete
-        ```
+      ```
+      [2013-11-26T03:11:06+00:00] INFO: Chef Infra Client Run complete in 0.300029878 seconds
+      [2013-11-26T03:11:06+00:00] INFO: Running report handlers
+      [2013-11-26T03:11:06+00:00] INFO: Cookbooks and versions run: ["cookbook_versions_handler 1.0.0"]
+      [2013-11-26T03:11:06+00:00] INFO: Report handlers complete
+      ```
 
-        **JsonFile Handler**
+      **JsonFile Handler**
 
-        The JsonFile handler is available from the `chef_handler` cookbook and can be used with exceptions and reports. It serializes run status data to a JSON file. This handler may be enabled in one of the following ways.
+      The JsonFile handler is available from the `chef_handler` cookbook and can be used with exceptions and reports. It serializes run status data to a JSON file. This handler may be enabled in one of the following ways.
 
-        By adding the following lines of Ruby code to either the client.rb file or the solo.rb file, depending on how Chef Infra Client is being run:
+      By adding the following lines of Ruby code to either the client.rb file or the solo.rb file, depending on how Chef Infra Client is being run:
 
-        ```ruby
-        require 'chef/handler/json_file'
-        report_handlers << Chef::Handler::JsonFile.new(path: '/var/chef/reports')
-        exception_handlers << Chef::Handler::JsonFile.new(path: '/var/chef/reports')
-        ```
+      ```ruby
+      require 'chef/handler/json_file'
+      report_handlers << Chef::Handler::JsonFile.new(path: '/var/chef/reports')
+      exception_handlers << Chef::Handler::JsonFile.new(path: '/var/chef/reports')
+      ```
 
-        By using the `chef_handler` resource in a recipe, similar to the following:
+      By using the `chef_handler` resource in a recipe, similar to the following:
 
-        ```ruby
-        chef_handler 'Chef::Handler::JsonFile' do
-          source 'chef/handler/json_file'
-          arguments path: '/var/chef/reports'
-          action :enable
-        end
-        ```
+      ```ruby
+      chef_handler 'Chef::Handler::JsonFile' do
+        source 'chef/handler/json_file'
+        arguments path: '/var/chef/reports'
+        action :enable
+      end
+      ```
 
-        After it has run, the run status data can be loaded and inspected via Interactive Ruby (IRb):
+      After it has run, the run status data can be loaded and inspected via Interactive Ruby (IRb):
 
-        ```
-        irb(main):002:0> require 'json' => true
-        irb(main):003:0> require 'chef' => true
-        irb(main):004:0> r = JSON.parse(IO.read('/var/chef/reports/chef-run-report-20110322060731.json')) => ... output truncated
-        irb(main):005:0> r.keys => ['end_time', 'node', 'updated_resources', 'exception', 'all_resources', 'success', 'elapsed_time', 'start_time', 'backtrace']
-        irb(main):006:0> r['elapsed_time'] => 0.00246
-        ```
+      ```
+      irb(main):002:0> require 'json' => true
+      irb(main):003:0> require 'chef' => true
+      irb(main):004:0> r = JSON.parse(IO.read('/var/chef/reports/chef-run-report-20110322060731.json')) => ... output truncated
+      irb(main):005:0> r.keys => ['end_time', 'node', 'updated_resources', 'exception', 'all_resources', 'success', 'elapsed_time', 'start_time', 'backtrace']
+      irb(main):006:0> r['elapsed_time'] => 0.00246
+      ```
 
-        Register the JsonFile handler
+      Register the JsonFile handler
 
-        ```ruby
-        chef_handler 'Chef::Handler::JsonFile' do
-          source 'chef/handler/json_file'
-          arguments path: '/var/chef/reports'
-          action :enable
-        end
-        ```
+      ```ruby
+      chef_handler 'Chef::Handler::JsonFile' do
+        source 'chef/handler/json_file'
+        arguments path: '/var/chef/reports'
+        action :enable
+      end
+      ```
 
-        **ErrorReport Handler**
+      **ErrorReport Handler**
 
-        The ErrorReport handler is built into Chef Infra Client and can be used for both exceptions and reports. It serializes error report data to a JSON file. This handler may be enabled in one of the following ways.
+      The ErrorReport handler is built into Chef Infra Client and can be used for both exceptions and reports. It serializes error report data to a JSON file. This handler may be enabled in one of the following ways.
 
-        By adding the following lines of Ruby code to either the client.rb file or the solo.rb file, depending on how Chef Infra Client is being run:
+      By adding the following lines of Ruby code to either the client.rb file or the solo.rb file, depending on how Chef Infra Client is being run:
 
-        ```ruby
-        require 'chef/handler/error_report'
-        report_handlers << Chef::Handler::ErrorReport.new
-        exception_handlers << Chef::Handler::ErrorReport.new
-        ```
+      ```ruby
+      require 'chef/handler/error_report'
+      report_handlers << Chef::Handler::ErrorReport.new
+      exception_handlers << Chef::Handler::ErrorReport.new
+      ```
 
-        By using the `chef_handler` resource in a recipe, similar to the following:
+      By using the `chef_handler` resource in a recipe, similar to the following:
 
-        ```ruby
-        chef_handler 'Chef::Handler::ErrorReport' do
-          source 'chef/handler/error_report'
-          action :enable
-        end
-        ```
+      ```ruby
+      chef_handler 'Chef::Handler::ErrorReport' do
+        source 'chef/handler/error_report'
+        action :enable
+      end
+      ```
       DOC
 
       property :class_name, String,

data/lib/chef/resource/chef_sleep.rb

@@ -1,5 +1,5 @@
 #
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -20,7 +20,8 @@ require "chef-utils/dist" unless defined?(ChefUtils::Dist)
 class Chef
   class Resource
     class ChefSleep < Chef::Resource
-      provides :chef_sleep
+      provides :chef_sleep, target_mode: true
+      target_mode support: :full
 
       description "Use the **chef_sleep** resource to pause (sleep) for a number of seconds during a #{ChefUtils::Dist::Infra::PRODUCT} run. Only use this resource when a command or service exits successfully but is not ready for the next step in a recipe."
       introduced "15.5"

data/lib/chef/resource/chef_vault_secret.rb

@@ -1,6 +1,6 @@
 #
 # Author:: Joshua Timberman <joshua@chef.io>
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.

data/lib/chef/resource/chocolatey_config.rb

@@ -1,5 +1,5 @@
 #
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -23,26 +23,26 @@ class Chef
       description "Use the **chocolatey_config** resource to add or remove Chocolatey configuration keys. Note: The Chocolatey package manager is not installed on Windows by default. You will need to install it prior to using this resource by adding the [Chocolatey cookbook](https://supermarket.chef.io/cookbooks/chocolatey/) to your node's run list."
       introduced "14.3"
       examples <<~DOC
-        **Set the Chocolatey cacheLocation config**:
+      **Set the Chocolatey cacheLocation config**:
 
-        ```ruby
-        chocolatey_config 'Set cacheLocation config' do
-          config_key 'cacheLocation'
-          value 'C:\\temp\\choco'
-        end
-        ```
+      ```ruby
+      chocolatey_config 'Set cacheLocation config' do
+        config_key 'cacheLocation'
+        value 'C:\\temp\\choco'
+      end
+      ```
 
-        **Unset a Chocolatey config**:
+      **Unset a Chocolatey config**:
 
-        ```ruby
-        chocolatey_config 'BogusConfig' do
-          action :unset
-        end
-        ```
+      ```ruby
+      chocolatey_config 'BogusConfig' do
+        action :unset
+      end
+      ```
       DOC
 
       property :config_key, String, name_property: true,
-        description: "An optional property to set the config key name if it differs from the resource block's name."
+               description: "An optional property to set the config key name if it differs from the resource block's name."
 
       property :value, String,
         description: "The value to set."

data/lib/chef/resource/chocolatey_feature.rb

@@ -1,5 +1,5 @@
 #
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -40,7 +40,7 @@ class Chef
       DOC
 
       property :feature_name, String, name_property: true,
-        description: "The name of the Chocolatey feature to enable or disable."
+               description: "The name of the Chocolatey feature to enable or disable."
 
       property :feature_state, [TrueClass, FalseClass], default: false, skip_docs: true
 

data/lib/chef/resource/chocolatey_installer.rb

@@ -6,54 +6,54 @@ class Chef
       description "Use the chocolatey_installer resource to ensure that Chocolatey itself is installed to your specification. Use the Chocolatey Feature resource to customize your install. Then use the Chocolatey Package resource to install packages on Windows via Chocolatey."
       introduced "18.3"
       examples <<~DOC
-        **Install Chocolatey**
+          **Install Chocolatey**
 
-        ```ruby
-        chocolatey_installer 'latest' do
-          action :install
-        end
-        ```
+          ```ruby
+          chocolatey_installer 'latest' do
+            action :install
+          end
+          ```
 
-        **Uninstall Chocolatey**
+          **Uninstall Chocolatey**
 
-        ```ruby
-        chocolatey_installer 'Some random verbiage' do
-          action :uninstall
-        end
-        ```
+          ```ruby
+          chocolatey_installer 'Some random verbiage' do
+            action :uninstall
+          end
+          ```
 
-        **Install Chocolatey with Parameters**
+          **Install Chocolatey with Parameters**
 
-        ```ruby
-        chocolatey_installer 'latest' do
-          action :install
-          download_url "https://www.contoso.com/foo"
-          chocolatey_version '2.12.24'
-        end
-        ```
+          ```ruby
+          chocolatey_installer 'latest' do
+            action :install
+            download_url "https://www.contoso.com/foo"
+            chocolatey_version '2.12.24'
+          end
+          ```
 
           ```ruby
           chocolatey_installer 'latest' do
             action :install
-            download_url "c:\\foo\\foo.nupkg"
+            download_url "c:\\foo\foo.nupkg"
             chocolatey_version '2.12.24'
           end
           ```
 
-        **Upgrade Chocolatey with Parameters**
+          **Upgrade Chocolatey with Parameters**
 
-        ```ruby
-        chocolatey_installer 'latest' do
-          action :upgrade
-          chocolatey_version '2.12.24'
-        end
-        ```
+          ```ruby
+          chocolatey_installer 'latest' do
+            action :upgrade
+            chocolatey_version '2.12.24'
+          end
+          ```
       DOC
 
       allowed_actions :install, :uninstall, :upgrade
 
       property :download_url, String,
-        description: "The URL to download Chocolatey from. This sets the value of $env:ChocolateyDownloadUrl and causes the installer to choose an alternate download location. If this is not set, Chocolatey installs fall back to the official Chocolatey community repository to download Chocolatey from. It can also be used for offline installation by providing a path to a Chocolatey.nupkg. If the provided URL is a PowerShell script (ending in .ps1), that script will be downloaded and executed directly. If it is any other file type, it will be downloaded to the Chef client directory. ChefConfig::Config.etc_chef_dir(windows: true) is used to find that location."
+        description: "The URL to download Chocolatey from. This sets the value of $env:ChocolateyDownloadUrl and causes the installer to choose an alternate download location. If this is not set, Chocolatey installs fall back to the official Chocolatey community repository to download Chocolatey from. It can also be used for offline installation by providing a path to a Chocolatey.nupkg."
 
       property :chocolatey_version, String,
         description: "Specifies a target version of Chocolatey to install. By default, the latest stable version is installed. This will use the value in $env:ChocolateyVersion by default, if that environment variable is present. This parameter is ignored if download_url is set."
@@ -128,25 +128,10 @@ class Chef
           powershell_exec("Set-Item -path env:ChocolateyProxyUser -Value #{new_resource.proxy_user}; Set-Item -path env:ChocolateyProxyPassword -Value #{new_resource.proxy_password}")
         end
 
-        # Handle custom download URLs appropriately based on file type
+        # note that Invoke-Expression is being called on the downloaded script (outer parens),
+        # not triggering the script download (inner parens)
         converge_if_changed do
-          if new_resource.download_url
-            Chef::Log.info("Using custom download URL for Chocolatey installation: #{new_resource.download_url}")
-            # If it's a PowerShell script, execute it directly (original behavior)
-            if new_resource.download_url.downcase.end_with?(".ps1")
-              powershell_exec("Invoke-Expression ((New-Object System.Net.WebClient).DownloadString('#{new_resource.download_url}'))").error!
-            else
-              # Assume it's a direct link to a nupkg or other file and handle accordingly
-              chef_dir = ChefConfig::Config.etc_chef_dir(windows: true)
-
-              # Let PowerShell handle the filename - it will use the server's suggested filename
-              # from Content-Disposition header, or fall back to the URL path
-              powershell_exec("Invoke-WebRequest '#{new_resource.download_url}' -OutFile '#{chef_dir}'").error!
-              Chef::Log.info("Downloaded file from #{new_resource.download_url} to #{chef_dir}")
-            end
-          else
-            powershell_exec("Invoke-Expression ((New-Object System.Net.WebClient).DownloadString('https://chocolatey.org/install.ps1'))").error!
-          end
+          powershell_exec("Invoke-Expression ((New-Object System.Net.WebClient).DownloadString('https://chocolatey.org/install.ps1'))").error!
         end
       end
 

data/lib/chef/resource/chocolatey_package.rb

@@ -1,6 +1,6 @@
 #
 # Author:: Adam Jacob (<adam@chef.io>)
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 # License:: Apache License, Version 2.0
 #
 # Licensed under the Apache License, Version 2.0 (the "License");

data/lib/chef/resource/chocolatey_source.rb

@@ -1,5 +1,5 @@
 #
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -41,42 +41,42 @@ class Chef
       DOC
 
       property :source_name, String, name_property: true,
-        description: "An optional property to set the source name if it differs from the resource block's name."
+               description: "An optional property to set the source name if it differs from the resource block's name."
 
       property :source, String,
         description: "The source URL."
 
       property :bypass_proxy, [TrueClass, FalseClass], default: false,
-        description: "Whether or not to bypass the system's proxy settings to access the source."
+               description: "Whether or not to bypass the system's proxy settings to access the source."
 
       property :admin_only, [TrueClass, FalseClass], default: false,
-        description: "Whether or not to set the source to be accessible to only admins.",
-        introduced: "15.1"
+               description: "Whether or not to set the source to be accessible to only admins.",
+               introduced: "15.1"
 
       property :allow_self_service, [TrueClass, FalseClass], default: false,
-        description: "Whether or not to set the source to be used for self service.",
-        introduced: "15.1"
+               description: "Whether or not to set the source to be used for self service.",
+               introduced: "15.1"
 
       property :priority, Integer, default: 0,
-        description: "The priority level of the source."
+               description: "The priority level of the source."
 
       property :disabled, [TrueClass, FalseClass], default: false, desired_state: false, skip_docs: true
 
       property :username, String,
-        description: "The username to use when authenticating against the source",
-        introduced: "17.7"
+               description: "The username to use when authenticating against the source",
+               introduced: "17.7"
 
       property :password, String, sensitive: true, desired_state: false,
-        description: "The password to use when authenticating against the source",
-        introduced: "17.7"
+               description: "The password to use when authenticating against the source",
+               introduced: "17.7"
 
       property :cert, String,
-        description: "The certificate to use when authenticating against the source",
-        introduced: "17.7"
+               description: "The certificate to use when authenticating against the source",
+               introduced: "17.7"
 
       property :cert_password, String, sensitive: true, desired_state: false,
-        description: "The password for the certificate to use when authenticating against the source",
-        introduced: "17.7"
+               description: "The password for the certificate to use when authenticating against the source",
+               introduced: "17.7"
 
       load_current_value do
         element = fetch_source_element(source_name)

data/lib/chef/resource/conditional.rb

@@ -1,6 +1,6 @@
 #
 # Author:: Daniel DeLeo (<dan@chef.io>)
-# Copyright:: Copyright (c) Chef Software Inc.
+# Copyright:: Copyright (c) 2009-2026 Progress Software Corporation and/or its subsidiaries or affiliates. All Rights Reserved.
 # License:: Apache License, Version 2.0
 #
 # Licensed under the Apache License, Version 2.0 (the "License");