chef 16.17.18-universal-mingw32 → 17.0.242-universal-mingw32

data/lib/chef/knife/bootstrap.rb

@@ -1,1192 +0,0 @@
-#
-# Author:: Adam Jacob (<adam@chef.io>)
-# Copyright:: Copyright (c) Chef Software Inc.
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-require_relative "../knife"
-require_relative "data_bag_secret_options"
-require "chef-utils/dist" unless defined?(ChefUtils::Dist)
-require "license_acceptance/cli_flags/mixlib_cli"
-module LicenseAcceptance
-  autoload :Acceptor, "license_acceptance/acceptor"
-end
-
-class Chef
-  class Knife
-    class Bootstrap < Knife
-      include DataBagSecretOptions
-      include LicenseAcceptance::CLIFlags::MixlibCLI
-
-      SUPPORTED_CONNECTION_PROTOCOLS ||= %w{ssh winrm}.freeze
-      WINRM_AUTH_PROTOCOL_LIST ||= %w{plaintext kerberos ssl negotiate}.freeze
-
-      # Common connectivity options
-      option :connection_user,
-        short: "-U USERNAME",
-        long: "--connection-user USERNAME",
-        description: "Authenticate to the target host with this user account."
-
-      option :connection_password,
-        short: "-P PASSWORD",
-        long: "--connection-password PASSWORD",
-        description: "Authenticate to the target host with this password."
-
-      option :connection_port,
-        short: "-p PORT",
-        long: "--connection-port PORT",
-        description: "The port on the target node to connect to."
-
-      option :connection_protocol,
-        short: "-o PROTOCOL",
-        long: "--connection-protocol PROTOCOL",
-        description: "The protocol to use to connect to the target node.",
-        in: SUPPORTED_CONNECTION_PROTOCOLS
-
-      option :max_wait,
-        short: "-W SECONDS",
-        long: "--max-wait SECONDS",
-        description: "The maximum time to wait for the initial connection to be established."
-
-      option :session_timeout,
-        long: "--session-timeout SECONDS",
-        description: "The number of seconds to wait for each connection operation to be acknowledged while running bootstrap.",
-        default: 60
-
-      # WinRM Authentication
-      option :winrm_ssl_peer_fingerprint,
-        long: "--winrm-ssl-peer-fingerprint FINGERPRINT",
-        description: "SSL certificate fingerprint expected from the target."
-
-      option :ca_trust_file,
-        short: "-f CA_TRUST_PATH",
-        long: "--ca-trust-file CA_TRUST_PATH",
-        description: "The Certificate Authority (CA) trust file used for SSL transport."
-
-      option :winrm_no_verify_cert,
-        long: "--winrm-no-verify-cert",
-        description: "Do not verify the SSL certificate of the target node for WinRM.",
-        boolean: true
-
-      option :winrm_ssl,
-        long: "--winrm-ssl",
-        description: "Use SSL in the WinRM connection."
-
-      option :winrm_auth_method,
-        short: "-w AUTH-METHOD",
-        long: "--winrm-auth-method AUTH-METHOD",
-        description: "The WinRM authentication method to use.",
-        in: WINRM_AUTH_PROTOCOL_LIST
-
-      option :winrm_basic_auth_only,
-        long: "--winrm-basic-auth-only",
-        description: "For WinRM basic authentication when using the 'ssl' auth method.",
-        boolean: true
-
-      # This option was provided in knife bootstrap windows winrm,
-      # but it is ignored  in knife-windows/WinrmSession, and so remains unimplemented here.
-      # option :kerberos_keytab_file,
-      #   :short => "-T KEYTAB_FILE",
-      #   :long => "--keytab-file KEYTAB_FILE",
-      #   :description => "The Kerberos keytab file used for authentication"
-
-      option :kerberos_realm,
-        short: "-R KERBEROS_REALM",
-        long: "--kerberos-realm KERBEROS_REALM",
-        description: "The Kerberos realm used for authentication."
-
-      option :kerberos_service,
-        short: "-S KERBEROS_SERVICE",
-        long: "--kerberos-service KERBEROS_SERVICE",
-        description: "The Kerberos service used for authentication."
-
-      ## SSH Authentication
-      option :ssh_gateway,
-        short: "-G GATEWAY",
-        long: "--ssh-gateway GATEWAY",
-        description: "The SSH gateway."
-
-      option :ssh_gateway_identity,
-        long: "--ssh-gateway-identity SSH_GATEWAY_IDENTITY",
-        description: "The SSH identity file used for gateway authentication."
-
-      option :ssh_forward_agent,
-        short: "-A",
-        long: "--ssh-forward-agent",
-        description: "Enable SSH agent forwarding.",
-        boolean: true
-
-      option :ssh_identity_file,
-        short: "-i IDENTITY_FILE",
-        long: "--ssh-identity-file IDENTITY_FILE",
-        description: "The SSH identity file used for authentication."
-
-      option :ssh_verify_host_key,
-        long: "--ssh-verify-host-key VALUE",
-        description: "Verify host key. Default is 'always'.",
-        in: %w{always accept_new accept_new_or_local_tunnel never},
-        default: "always"
-
-      #
-      # bootstrap options
-      #
-
-      # client.rb content via chef-full/bootstrap_context
-      option :bootstrap_version,
-        long: "--bootstrap-version VERSION",
-        description: "The version of #{ChefUtils::Dist::Infra::PRODUCT} to install."
-
-      option :channel,
-        long: "--channel CHANNEL",
-        description: "Install from the given channel. Default is 'stable'.",
-        default: "stable",
-        in: %w{stable current unstable}
-
-      # client.rb content via chef-full/bootstrap_context
-      option :bootstrap_proxy,
-        long: "--bootstrap-proxy PROXY_URL",
-        description: "The proxy server for the node being bootstrapped."
-
-      # client.rb content via bootstrap_context
-      option :bootstrap_proxy_user,
-        long: "--bootstrap-proxy-user PROXY_USER",
-        description: "The proxy authentication username for the node being bootstrapped."
-
-      # client.rb content via bootstrap_context
-      option :bootstrap_proxy_pass,
-        long: "--bootstrap-proxy-pass PROXY_PASS",
-        description: "The proxy authentication password for the node being bootstrapped."
-
-      # client.rb content via bootstrap_context
-      option :bootstrap_no_proxy,
-        long: "--bootstrap-no-proxy [NO_PROXY_URL|NO_PROXY_IP]",
-        description: "Do not proxy locations for the node being bootstrapped"
-
-      # client.rb content via bootstrap_context
-      option :bootstrap_template,
-        short: "-t TEMPLATE",
-        long: "--bootstrap-template TEMPLATE",
-        description: "Bootstrap #{ChefUtils::Dist::Infra::PRODUCT} using a built-in or custom template. Set to the full path of an erb template or use one of the built-in templates."
-
-      # client.rb content via bootstrap_context
-      option :node_ssl_verify_mode,
-        long: "--node-ssl-verify-mode [peer|none]",
-        description: "Whether or not to verify the SSL cert for all HTTPS requests.",
-        proc: Proc.new { |v|
-          valid_values = %w{none peer}
-          unless valid_values.include?(v)
-            raise "Invalid value '#{v}' for --node-ssl-verify-mode. Valid values are: #{valid_values.join(", ")}"
-          end
-
-          v
-        }
-
-      # bootstrap_context - client.rb
-      option :node_verify_api_cert,
-        long: "--[no-]node-verify-api-cert",
-        description: "Verify the SSL cert for HTTPS requests to the #{ChefUtils::Dist::Server::PRODUCT} API.",
-        boolean: true
-
-      # runtime - sudo settings (train handles sudo)
-      option :use_sudo,
-        long: "--sudo",
-        description: "Execute the bootstrap via sudo.",
-        boolean: true
-
-      # runtime - sudo settings (train handles sudo)
-      option :preserve_home,
-        long: "--sudo-preserve-home",
-        description: "Preserve non-root user HOME environment variable with sudo.",
-        boolean: true
-
-      # runtime - sudo settings (train handles sudo)
-      option :use_sudo_password,
-        long: "--use-sudo-password",
-        description: "Execute the bootstrap via sudo with password.",
-        boolean: false
-
-      # runtime - su user
-      option :su_user,
-        long: "--su-user NAME",
-        description: "The su - USER name to perform bootstrap command using a non-root user."
-
-      # runtime - su user password
-      option :su_password,
-        long: "--su-password PASSWORD",
-        description: "The su USER password for authentication."
-
-      # runtime - client_builder
-      option :chef_node_name,
-        short: "-N NAME",
-        long: "--node-name NAME",
-        description: "The node name for your new node."
-
-      # runtime - client_builder - set runlist when creating node
-      option :run_list,
-        short: "-r RUN_LIST",
-        long: "--run-list RUN_LIST",
-        description: "Comma separated list of roles/recipes to apply.",
-        proc: lambda { |o| o.split(/[\s,]+/) },
-        default: []
-
-      # runtime - client_builder - set policy name when creating node
-      option :policy_name,
-        long: "--policy-name POLICY_NAME",
-        description: "Policyfile name to use (--policy-group must also be given).",
-        default: nil
-
-      # runtime - client_builder - set policy group when creating node
-      option :policy_group,
-        long: "--policy-group POLICY_GROUP",
-        description: "Policy group name to use (--policy-name must also be given).",
-        default: nil
-
-      # runtime - client_builder -  node tags
-      option :tags,
-        long: "--tags TAGS",
-        description: "Comma separated list of tags to apply to the node.",
-        proc: lambda { |o| o.split(/[\s,]+/) },
-        default: []
-
-      # bootstrap template
-      option :first_boot_attributes,
-        short: "-j JSON_ATTRIBS",
-        long: "--json-attributes",
-        description: "A JSON string to be added to the first run of #{ChefUtils::Dist::Infra::CLIENT}.",
-        proc: lambda { |o| Chef::JSONCompat.parse(o) },
-        default: nil
-
-      # bootstrap template
-      option :first_boot_attributes_from_file,
-        long: "--json-attribute-file FILE",
-        description: "A JSON file to be used to the first run of #{ChefUtils::Dist::Infra::CLIENT}.",
-        proc: lambda { |o| Chef::JSONCompat.parse(File.read(o)) },
-        default: nil
-
-      # bootstrap template
-      # Create ohai hints in /etc/chef/ohai/hints, fname=hintname, content=value
-      option :hints,
-        long: "--hint HINT_NAME[=HINT_FILE]",
-        description: "Specify an Ohai hint to be set on the bootstrap target. Use multiple --hint options to specify multiple hints.",
-        proc: Proc.new { |hint, accumulator|
-          accumulator ||= {}
-          name, path = hint.split("=", 2)
-          accumulator[name] = path ? Chef::JSONCompat.parse(::File.read(path)) : {}
-          accumulator
-        }
-
-      # bootstrap override: url of a an installer shell script to use in place of omnitruck
-      # Note that the bootstrap template _only_ references this out of Chef::Config, and not from
-      # the provided options to knife bootstrap, so we set the Chef::Config option here.
-      option :bootstrap_url,
-        long: "--bootstrap-url URL",
-        description: "URL to a custom installation script."
-
-      option :bootstrap_product,
-        long: "--bootstrap-product PRODUCT",
-        description: "Product to install.",
-        default: "chef"
-
-      option :msi_url, # Windows target only
-        short: "-m URL",
-        long: "--msi-url URL",
-        description: "Location of the #{ChefUtils::Dist::Infra::PRODUCT} MSI. The default templates will prefer to download from this location. The MSI will be downloaded from #{ChefUtils::Dist::Org::WEBSITE} if not provided (Windows).",
-        default: ""
-
-      # bootstrap override: Do this instead of our own setup.sh from omnitruck. Causes bootstrap_url to be ignored.
-      option :bootstrap_install_command,
-        long: "--bootstrap-install-command COMMANDS",
-        description: "Custom command to install #{ChefUtils::Dist::Infra::PRODUCT}."
-
-      # bootstrap template: Run this command first in the bootstrap script
-      option :bootstrap_preinstall_command,
-        long: "--bootstrap-preinstall-command COMMANDS",
-        description: "Custom commands to run before installing #{ChefUtils::Dist::Infra::PRODUCT}."
-
-      # bootstrap template
-      option :bootstrap_wget_options,
-        long: "--bootstrap-wget-options OPTIONS",
-        description: "Add options to wget when installing #{ChefUtils::Dist::Infra::PRODUCT}."
-
-      # bootstrap template
-      option :bootstrap_curl_options,
-        long: "--bootstrap-curl-options OPTIONS",
-        description: "Add options to curl when install #{ChefUtils::Dist::Infra::PRODUCT}."
-
-      # chef_vault_handler
-      option :bootstrap_vault_file,
-        long: "--bootstrap-vault-file VAULT_FILE",
-        description: "A JSON file with a list of vault(s) and item(s) to be updated."
-
-      # chef_vault_handler
-      option :bootstrap_vault_json,
-        long: "--bootstrap-vault-json VAULT_JSON",
-        description: "A JSON string with the vault(s) and item(s) to be updated."
-
-      # chef_vault_handler
-      option :bootstrap_vault_item,
-        long: "--bootstrap-vault-item VAULT_ITEM",
-        description: 'A single vault and item to update as "vault:item".',
-        proc: Proc.new { |i, accumulator|
-          (vault, item) = i.split(":")
-          accumulator ||= {}
-          accumulator[vault] ||= []
-          accumulator[vault].push(item)
-          accumulator
-        }
-
-      # Deprecated options. These must be declared after
-      # regular options because they refer to the replacement
-      # option definitions implicitly.
-      deprecated_option :auth_timeout,
-        replacement: :max_wait,
-        long: "--max-wait SECONDS"
-
-      deprecated_option :forward_agent,
-        replacement: :ssh_forward_agent,
-        boolean: true, long: "--forward-agent"
-
-      deprecated_option :host_key_verify,
-        replacement: :ssh_verify_host_key,
-        boolean: true, long: "--[no-]host-key-verify",
-        value_mapper: Proc.new { |verify| verify ? "always" : "never" }
-
-      deprecated_option :prerelease,
-        replacement: :channel,
-        long: "--prerelease",
-        boolean: true, value_mapper: Proc.new { "current" }
-
-      deprecated_option :ssh_user,
-        replacement: :connection_user,
-        long: "--ssh-user USERNAME"
-
-      deprecated_option :ssh_password,
-        replacement: :connection_password,
-        long: "--ssh-password PASSWORD"
-
-      deprecated_option :ssh_port,
-        replacement: :connection_port,
-        long: "--ssh-port PASSWORD"
-
-      deprecated_option :ssl_peer_fingerprint,
-        replacement: :winrm_ssl_peer_fingerprint,
-        long: "--ssl-peer-fingerprint FINGERPRINT"
-
-      deprecated_option :winrm_user,
-        replacement: :connection_user,
-        long: "--winrm-user USERNAME", short: "-x USERNAME"
-
-      deprecated_option :winrm_password,
-        replacement: :connection_password,
-        long: "--winrm-password PASSWORD"
-
-      deprecated_option :winrm_port,
-        replacement: :connection_port,
-        long: "--winrm-port PORT"
-
-      deprecated_option :winrm_authentication_protocol,
-        replacement: :winrm_auth_method,
-        long: "--winrm-authentication-protocol PROTOCOL"
-
-      deprecated_option :winrm_session_timeout,
-        replacement: :session_timeout,
-        long: "--winrm-session-timeout MINUTES"
-
-      deprecated_option :winrm_ssl_verify_mode,
-        replacement: :winrm_no_verify_cert,
-        long: "--winrm-ssl-verify-mode MODE"
-
-      deprecated_option :winrm_transport, replacement: :winrm_ssl,
-        long: "--winrm-transport TRANSPORT",
-        value_mapper: Proc.new { |value| value == "ssl" }
-
-      attr_reader :connection
-
-      deps do
-        require "erubis" unless defined?(Erubis)
-
-        require "net/ssh" unless defined?(Net::SSH)
-        require_relative "../json_compat"
-        require_relative "../util/path_helper"
-        require_relative "bootstrap/chef_vault_handler"
-        require_relative "bootstrap/client_builder"
-        require_relative "bootstrap/train_connector"
-      end
-
-      banner "knife bootstrap [PROTOCOL://][USER@]FQDN (options)"
-
-      def client_builder
-        @client_builder ||= Chef::Knife::Bootstrap::ClientBuilder.new(
-          chef_config: Chef::Config,
-          config: config,
-          ui: ui
-        )
-      end
-
-      def chef_vault_handler
-        @chef_vault_handler ||= Chef::Knife::Bootstrap::ChefVaultHandler.new(
-          config: config,
-          ui: ui
-        )
-      end
-
-      # Determine if we need to accept the Chef Infra license locally in order to successfully bootstrap
-      # the remote node. Remote 'chef-client' run will fail if it is >= 15 and the license is not accepted locally.
-      def check_license
-        Chef::Log.debug("Checking if we need to accept Chef license to bootstrap node")
-        version = config[:bootstrap_version] || Chef::VERSION.split(".").first
-        acceptor = LicenseAcceptance::Acceptor.new(logger: Chef::Log, provided: Chef::Config[:chef_license])
-        if acceptor.license_required?("chef", version)
-          Chef::Log.debug("License acceptance required for chef version: #{version}")
-          license_id = acceptor.id_from_mixlib("chef")
-          acceptor.check_and_persist(license_id, version)
-          Chef::Config[:chef_license] ||= acceptor.acceptance_value
-        end
-      end
-
-      # The default bootstrap template to use to bootstrap a server.
-      # This is a public API hook which knife plugins use or inherit and override.
-      #
-      # @return [String] Default bootstrap template
-      def default_bootstrap_template
-        if connection.windows?
-          "windows-chef-client-msi"
-        else
-          "chef-full"
-        end
-      end
-
-      def host_descriptor
-        Array(@name_args).first
-      end
-
-      # The server_name is the DNS or IP we are going to connect to, it is not necessarily
-      # the node name, the fqdn, or the hostname of the server. This is a public API hook
-      # which knife plugins use or inherit and override.
-      #
-      # @return [String] The DNS or IP that bootstrap will connect to
-      def server_name
-        if host_descriptor
-          @server_name ||= host_descriptor.split("@").reverse[0]
-        end
-      end
-
-      # @return [String] The CLI specific bootstrap template or the default
-      def bootstrap_template
-        # Allow passing a bootstrap template or use the default
-        config[:bootstrap_template] || default_bootstrap_template
-      end
-
-      def find_template
-        template = bootstrap_template
-
-        # Use the template directly if it's a path to an actual file
-        if File.exist?(template)
-          Chef::Log.trace("Using the specified bootstrap template: #{File.dirname(template)}")
-          return template
-        end
-
-        # Otherwise search the template directories until we find the right one
-        bootstrap_files = []
-        bootstrap_files << File.join(__dir__, "bootstrap/templates", "#{template}.erb")
-        bootstrap_files << File.join(Knife.chef_config_dir, "bootstrap", "#{template}.erb") if Chef::Knife.chef_config_dir
-        Chef::Util::PathHelper.home(".chef", "bootstrap", "#{template}.erb") { |p| bootstrap_files << p }
-        bootstrap_files << Gem.find_files(File.join("chef", "knife", "bootstrap", "#{template}.erb"))
-        bootstrap_files.flatten!
-
-        template_file = Array(bootstrap_files).find do |bootstrap_template|
-          Chef::Log.trace("Looking for bootstrap template in #{File.dirname(bootstrap_template)}")
-          File.exist?(bootstrap_template)
-        end
-
-        unless template_file
-          ui.info("Can not find bootstrap definition for #{template}")
-          raise Errno::ENOENT
-        end
-
-        Chef::Log.trace("Found bootstrap template: #{template_file}")
-
-        template_file
-      end
-
-      def secret
-        @secret ||= encryption_secret_provided_ignore_encrypt_flag? ? read_secret : nil
-      end
-
-      # Establish bootstrap context for template rendering.
-      # Requires connection to be a live connection in order to determine
-      # the correct platform.
-      def bootstrap_context
-        @bootstrap_context ||=
-          if connection.windows?
-            require_relative "core/windows_bootstrap_context"
-            Knife::Core::WindowsBootstrapContext.new(config, config[:run_list], Chef::Config, secret)
-          else
-            require_relative "core/bootstrap_context"
-            Knife::Core::BootstrapContext.new(config, config[:run_list], Chef::Config, secret)
-          end
-      end
-
-      def first_boot_attributes
-        @config[:first_boot_attributes] || @config[:first_boot_attributes_from_file] || {}
-      end
-
-      def render_template
-        @config[:first_boot_attributes] = first_boot_attributes
-        template_file = find_template
-        template = IO.read(template_file).chomp
-        Erubis::Eruby.new(template).evaluate(bootstrap_context)
-      end
-
-      def run
-        check_license if ChefUtils::Dist::Org::ENFORCE_LICENSE
-
-        plugin_setup!
-        validate_name_args!
-        validate_protocol!
-        validate_first_boot_attributes!
-        validate_winrm_transport_opts!
-        validate_policy_options!
-        plugin_validate_options!
-
-        winrm_warn_no_ssl_verification
-        warn_on_short_session_timeout
-
-        plugin_create_instance!
-        $stdout.sync = true
-        connect!
-        register_client
-
-        content = render_template
-        bootstrap_path = upload_bootstrap(content)
-        perform_bootstrap(bootstrap_path)
-        plugin_finalize
-      ensure
-        connection.del_file!(bootstrap_path) if connection && bootstrap_path
-      end
-
-      def register_client
-        # chef-vault integration must use the new client-side hawtness, otherwise to use the
-        # new client-side hawtness, just delete your validation key.
-        if chef_vault_handler.doing_chef_vault? ||
-            (Chef::Config[:validation_key] &&
-             !File.exist?(File.expand_path(Chef::Config[:validation_key])))
-
-          unless config[:chef_node_name]
-            ui.error("You must pass a node name with -N when bootstrapping with user credentials")
-            exit 1
-          end
-          client_builder.run
-          chef_vault_handler.run(client_builder.client)
-
-          bootstrap_context.client_pem = client_builder.client_path
-        else
-          ui.warn "Performing legacy client registration with the validation key at #{Chef::Config[:validation_key]}..."
-          ui.warn "Remove the key file or remove the 'validation_key' configuration option from your config.rb (knife.rb) to use more secure user credentials for client registration."
-        end
-      end
-
-      def perform_bootstrap(remote_bootstrap_script_path)
-        ui.info("Bootstrapping #{ui.color(server_name, :bold)}")
-        cmd = bootstrap_command(remote_bootstrap_script_path)
-        bootstrap_run_command(cmd)
-      end
-
-      # Actual bootstrap command to be run on the node.
-      # Handles recursive calls if su USER failed to authenticate.
-      def bootstrap_run_command(cmd)
-        r = connection.run_command(cmd) do |data, channel|
-          ui.msg("#{ui.color(" [#{connection.hostname}]", :cyan)} #{data}")
-          channel.send_data("#{config[:su_password] || config[:connection_password]}\n") if data.match?("Password:")
-        end
-
-        if r.exit_status != 0
-          ui.error("The following error occurred on #{server_name}:")
-          ui.error("#{r.stdout} #{r.stderr}".strip)
-          exit(r.exit_status)
-        end
-      rescue Train::UserError => e
-        limit ||= 0
-        if e.reason == :bad_su_user_password && limit < 3
-          limit += 1
-          ui.warn("Failed to authenticate su - #{config[:su_user]} to #{server_name}")
-          config[:su_password] = ui.ask("Enter password for su - #{config[:su_user]}@#{server_name}:", echo: false)
-          retry
-        else
-          raise
-        end
-      end
-
-      def connect!
-        ui.info("Connecting to #{ui.color(server_name, :bold)} using #{connection_protocol}")
-        opts ||= connection_opts.dup
-        do_connect(opts)
-      rescue Train::Error => e
-        # We handle these by message text only because train only loads the
-        # transports and protocols that it needs - so the exceptions may not be defined,
-        # and we don't want to require files internal to train.
-        if e.message =~ /fingerprint (\S+) is unknown for "(.+)"/ # Train::Transports::SSHFailed
-          fingerprint = $1
-          hostname, ip = $2.split(",")
-          # TODO: convert the SHA256 base64 value to hex with colons
-          # 'ssh' example output:
-          # RSA key fingerprint is e5:cb:c0:e2:21:3b:12:52:f8:ce:cb:00:24:e2:0c:92.
-          # ECDSA key fingerprint is 5d:67:61:08:a9:d7:01:fd:5e:ae:7e:09:40:ef:c0:3c.
-          # will exit 3 on N
-          ui.confirm <<~EOM
-            The authenticity of host '#{hostname} (#{ip})' can't be established.
-            fingerprint is #{fingerprint}.
-
-            Are you sure you want to continue connecting
-          EOM
-          # FIXME: this should save the key to known_hosts but doesn't appear to be
-          config[:ssh_verify_host_key] = :accept_new
-          conn_opts = connection_opts(reset: true)
-          opts.merge! conn_opts
-          retry
-        elsif (ssh? && e.cause && e.cause.class == Net::SSH::AuthenticationFailed) || (ssh? && e.class == Train::ClientError && e.reason == :no_ssh_password_or_key_available)
-          if connection.password_auth?
-            raise
-          else
-            ui.warn("Failed to authenticate #{opts[:user]} to #{server_name} - trying password auth")
-            password = ui.ask("Enter password for #{opts[:user]}@#{server_name}:", echo: false)
-          end
-
-          opts.merge! force_ssh_password_opts(password)
-          retry
-        else
-          raise
-        end
-      rescue RuntimeError => e
-        if winrm? && e.message == "password is a required option"
-          if connection.password_auth?
-            raise
-          else
-            ui.warn("Failed to authenticate #{opts[:user]} to #{server_name} - trying password auth")
-            password = ui.ask("Enter password for #{opts[:user]}@#{server_name}:", echo: false)
-          end
-
-          opts.merge! force_winrm_password_opts(password)
-          retry
-        else
-          raise
-        end
-      end
-
-      def handle_ssh_error(e); end
-
-      # url values override CLI flags, if you provide both
-      # we'll use the one that you gave in the URL.
-      def connection_protocol
-        return @connection_protocol if @connection_protocol
-
-        from_url = host_descriptor =~ %r{^(.*)://} ? $1 : nil
-        from_knife = config[:connection_protocol]
-        @connection_protocol = from_url || from_knife || "ssh"
-      end
-
-      def do_connect(conn_options)
-        @connection = TrainConnector.new(host_descriptor, connection_protocol, conn_options)
-        connection.connect!
-      rescue Train::UserError => e
-        limit ||= 1
-        if !conn_options.key?(:pty) && e.reason == :sudo_no_tty
-          ui.warn("#{e.message} - trying with pty request")
-          conn_options[:pty] = true # ensure we can talk to systems with requiretty set true in sshd config
-          retry
-        elsif config[:use_sudo_password] && (e.reason == :sudo_password_required || e.reason == :bad_sudo_password) && limit < 3
-          ui.warn("Failed to authenticate #{conn_options[:user]} to #{server_name} - #{e.message} \n sudo: #{limit} incorrect password attempt")
-          sudo_password = ui.ask("Enter sudo password for #{conn_options[:user]}@#{server_name}:", echo: false)
-          limit += 1
-          conn_options[:sudo_password] = sudo_password
-
-          retry
-        else
-          raise
-        end
-      end
-
-      # Fail if both first_boot_attributes and first_boot_attributes_from_file
-      # are set.
-      def validate_first_boot_attributes!
-        if @config[:first_boot_attributes] && @config[:first_boot_attributes_from_file]
-          raise Chef::Exceptions::BootstrapCommandInputError
-        end
-
-        true
-      end
-
-      # FIXME: someone needs to clean this up properly:  https://github.com/chef/chef/issues/9645
-      # This code is deliberately left without an abstraction around deprecating the config options to avoid knife plugins from
-      # using those methods (which will need to be deprecated and break them) via inheritance (ruby does not have a true `private`
-      # so the lack of any inheritable implementation is because of that).
-      #
-      def winrm_auth_method
-        config.key?(:winrm_auth_method) ? config[:winrm_auth_method] : config.key?(:winrm_authentications_protocol) ? config[:winrm_authentication_protocol] : "negotiate" # rubocop:disable Style/NestedTernaryOperator
-      end
-
-      def ssh_verify_host_key
-        config.key?(:ssh_verify_host_key) ? config[:ssh_verify_host_key] : config.key?(:host_key_verify) ? config[:host_key_verify] : "always" # rubocop:disable Style/NestedTernaryOperator
-      end
-
-      # Fail if using plaintext auth without ssl because
-      # this can expose keys in plaintext on the wire.
-      # TODO test for this method
-      # TODO check that the protocol is valid.
-      def validate_winrm_transport_opts!
-        return true unless winrm?
-
-        if Chef::Config[:validation_key] && !File.exist?(File.expand_path(Chef::Config[:validation_key]))
-          if winrm_auth_method == "plaintext" &&
-              config[:winrm_ssl] != true
-            ui.error <<~EOM
-              Validatorless bootstrap over unsecure winrm channels could expose your
-              key to network sniffing.
-               Please use a 'winrm_auth_method' other than 'plaintext',
-              or enable ssl on #{server_name} then use the ---winrm-ssl flag
-              to connect.
-            EOM
-
-            exit 1
-          end
-        end
-        true
-      end
-
-      # fail if the server_name is nil
-      def validate_name_args!
-        if server_name.nil?
-          ui.error("Must pass an FQDN or ip to bootstrap")
-          exit 1
-        end
-      end
-
-      # Ensure options are valid by checking policyfile values.
-      #
-      # The method call will cause the program to exit(1) if:
-      #   * Only one of --policy-name and --policy-group is specified
-      #   * Policyfile options are set and --run-list is set as well
-      #
-      # @return [TrueClass] If options are valid.
-      def validate_policy_options!
-        if incomplete_policyfile_options?
-          ui.error("--policy-name and --policy-group must be specified together")
-          exit 1
-        elsif policyfile_and_run_list_given?
-          ui.error("Policyfile options and --run-list are exclusive")
-          exit 1
-        end
-      end
-
-      # Ensure a valid protocol is provided for target host connection
-      #
-      # The method call will cause the program to exit(1) if:
-      #   * Conflicting protocols are given via the target URI and the --protocol option
-      #   * The protocol is not a supported protocol
-      #
-      # @return [TrueClass] If options are valid.
-      def validate_protocol!
-        from_cli = config[:connection_protocol]
-        if from_cli && connection_protocol != from_cli
-          # Hanging indent to align with the ERROR: prefix
-          ui.error <<~EOM
-            The URL '#{host_descriptor}' indicates protocol is '#{connection_protocol}'
-            while the --protocol flag specifies '#{from_cli}'.  Please include
-            only one or the other.
-          EOM
-          exit 1
-        end
-
-        unless SUPPORTED_CONNECTION_PROTOCOLS.include?(connection_protocol)
-          ui.error <<~EOM
-            Unsupported protocol '#{connection_protocol}'.
-
-            Supported protocols are: #{SUPPORTED_CONNECTION_PROTOCOLS.join(" ")}
-          EOM
-          exit 1
-        end
-        true
-      end
-
-      # Validate any additional options
-      #
-      # Plugins that subclass bootstrap, e.g. knife-ec2, can use this method to validate any additional options before any other actions are executed
-      #
-      # @return [TrueClass] If options are valid or exits
-      def plugin_validate_options!
-        true
-      end
-
-      # Create the server that we will bootstrap, if necessary
-      #
-      # Plugins that subclass bootstrap, e.g. knife-ec2, can use this method to call out to an API to build an instance of the server we wish to bootstrap
-      #
-      # @return [TrueClass] If instance successfully created, or exits
-      def plugin_create_instance!
-        true
-      end
-
-      # Perform any setup necessary by the plugin
-      #
-      # Plugins that subclass bootstrap, e.g. knife-ec2, can use this method to create connection objects
-      #
-      # @return [TrueClass] If instance successfully created, or exits
-      def plugin_setup!; end
-
-      # Perform any teardown or cleanup necessary by the plugin
-      #
-      # Plugins that subclass bootstrap, e.g. knife-ec2, can use this method to display a message or perform any cleanup
-      #
-      # @return [void]
-      def plugin_finalize; end
-
-      # If session_timeout is too short, it is likely
-      # a holdover from "--winrm-session-timeout" which used
-      # minutes as its unit, instead of seconds.
-      # Warn the human so that they are not surprised.
-      #
-      def warn_on_short_session_timeout
-        if session_timeout && session_timeout <= 15
-          ui.warn <<~EOM
-            You provided '--session-timeout #{session_timeout}' second(s).
-            Did you mean '--session-timeout #{session_timeout * 60}' seconds?
-          EOM
-        end
-      end
-
-      def winrm_warn_no_ssl_verification
-        return unless winrm?
-
-        # REVIEWER NOTE
-        # The original check from knife plugin did not include winrm_ssl_peer_fingerprint
-        # Reference:
-        # https://github.com/chef/knife-windows/blob/92d151298142be4a4750c5b54bb264f8d5b81b8a/lib/chef/knife/winrm_knife_base.rb#L271-L273
-        # TODO Seems like we should also do a similar warning if ssh_verify_host == false
-        if config[:ca_trust_file].nil? &&
-            config[:winrm_no_verify_cert] &&
-            config[:winrm_ssl_peer_fingerprint].nil?
-          ui.warn <<~WARN
-            * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-            SSL validation of HTTPS requests for the WinRM transport is disabled.
-            HTTPS WinRM connections are still encrypted, but knife is not able
-            to detect forged replies or spoofing attacks.
-
-            To work around this issue you can use the flag `--winrm-no-verify-cert`
-            or add an entry like this to your knife configuration file:
-
-               # Verify all WinRM HTTPS connections
-               knife[:winrm_no_verify_cert] = true
-
-            You can also specify a ca_trust_file via --ca-trust-file,
-            or the expected fingerprint of the target host's certificate
-            via --winrm-ssl-peer-fingerprint.
-          WARN
-        end
-      end
-
-      # @return a configuration hash suitable for connecting to the remote
-      # host via train
-      def connection_opts(reset: false)
-        return @connection_opts unless @connection_opts.nil? || reset == true
-
-        @connection_opts = {}
-        @connection_opts.merge! base_opts
-        @connection_opts.merge! host_verify_opts
-        @connection_opts.merge! gateway_opts
-        @connection_opts.merge! sudo_opts
-        @connection_opts.merge! winrm_opts
-        @connection_opts.merge! ssh_opts
-        @connection_opts.merge! ssh_identity_opts
-        @connection_opts
-      end
-
-      def winrm?
-        connection_protocol == "winrm"
-      end
-
-      def ssh?
-        connection_protocol == "ssh"
-      end
-
-      # Common configuration for all protocols
-      def base_opts
-        port = config_for_protocol(:port)
-        user = config_for_protocol(:user)
-        {}.tap do |opts|
-          opts[:logger] = Chef::Log
-          opts[:password] = config[:connection_password] if config.key?(:connection_password)
-          opts[:user] = user if user
-          opts[:max_wait_until_ready] = config[:max_wait].to_f unless config[:max_wait].nil?
-          # TODO - when would we need to provide rdp_port vs port?  Or are they not mutually exclusive?
-          opts[:port] = port if port
-        end
-      end
-
-      def host_verify_opts
-        if winrm?
-          { self_signed: config[:winrm_no_verify_cert] === true }
-        elsif ssh?
-          # Fall back to the old knife config key name for back compat.
-          { verify_host_key: ssh_verify_host_key }
-        else
-          {}
-        end
-      end
-
-      def ssh_opts
-        opts = {}
-        return opts if winrm?
-
-        opts[:non_interactive] = true # Prevent password prompts from underlying net/ssh
-        opts[:forward_agent] = (config[:ssh_forward_agent] === true)
-        opts[:connection_timeout] = session_timeout
-        opts
-      end
-
-      def ssh_identity_opts
-        opts = {}
-        return opts if winrm?
-
-        identity_file = config[:ssh_identity_file]
-        if identity_file
-          opts[:key_files] = [identity_file]
-          # We only set keys_only based on the explicit ssh_identity_file;
-          # someone may use a gateway key and still expect password auth
-          # on the target.  Similarly, someone may have a default key specified
-          # in knife config, but have provided a password on the CLI.
-
-          # REVIEW NOTE: this is a new behavior. Originally, ssh_identity_file
-          # could only be populated from CLI options, so there was no need to check
-          # for this. We will also set keys_only to false only if there are keys
-          # and no password.
-          # If both are present, train(via net/ssh)  will prefer keys, falling back to password.
-          # Reference: https://github.com/chef/chef/blob/master/lib/chef/knife/ssh.rb#L272
-          opts[:keys_only] = config.key?(:connection_password) == false
-        else
-          opts[:key_files] = []
-          opts[:keys_only] = false
-        end
-
-        gateway_identity_file = config[:ssh_gateway] ? config[:ssh_gateway_identity] : nil
-        unless gateway_identity_file.nil?
-          opts[:key_files] << gateway_identity_file
-        end
-
-        opts
-      end
-
-      def gateway_opts
-        opts = {}
-        if config[:ssh_gateway]
-          split = config[:ssh_gateway].split("@", 2)
-          if split.length == 1
-            gw_host = split[0]
-          else
-            gw_user = split[0]
-            gw_host = split[1]
-          end
-          gw_host, gw_port = gw_host.split(":", 2)
-          # TODO - validate convertible port in config validation?
-          gw_port = Integer(gw_port) rescue nil
-          opts[:bastion_host] = gw_host
-          opts[:bastion_user] = gw_user
-          opts[:bastion_port] = gw_port
-        end
-        opts
-      end
-
-      # use_sudo - tells bootstrap to use the sudo command to run bootstrap
-      # use_sudo_password - tells bootstrap to use the sudo command to run bootstrap
-      #                     and to use the password specified with --password
-      # TODO: I'd like to make our sudo options sane:
-      # --sudo (bool) - use sudo
-      # --sudo-password PASSWORD (default:  :password) - use this password for sudo
-      # --sudo-options "opt,opt,opt" to pass into sudo
-      # --sudo-command COMMAND sudo command other than sudo
-      # REVIEW NOTE: knife bootstrap did not pull sudo values from Chef::Config,
-      #              should we change that for consistency?
-      def sudo_opts
-        return {} if winrm?
-
-        opts = { sudo: false }
-        if config[:use_sudo]
-          opts[:sudo] = true
-          if config[:use_sudo_password]
-            opts[:sudo_password] = config[:connection_password]
-          end
-          if config[:preserve_home]
-            opts[:sudo_options] = "-H"
-          end
-        end
-        opts
-      end
-
-      def winrm_opts
-        return {} unless winrm?
-
-        opts = {
-          winrm_transport: winrm_auth_method, # winrm gem and train calls auth method 'transport'
-          winrm_basic_auth_only: config[:winrm_basic_auth_only] || false,
-          ssl: config[:winrm_ssl] === true,
-          ssl_peer_fingerprint: config[:winrm_ssl_peer_fingerprint],
-        }
-
-        if winrm_auth_method == "kerberos"
-          opts[:kerberos_service] = config[:kerberos_service] if config[:kerberos_service]
-          opts[:kerberos_realm] = config[:kerberos_realm] if config[:kerberos_service]
-        end
-
-        if config[:ca_trust_file]
-          opts[:ca_trust_path] = config[:ca_trust_file]
-        end
-
-        opts[:operation_timeout] = session_timeout
-
-        opts
-      end
-
-      # Config overrides to force password auth.
-      def force_ssh_password_opts(password)
-        {
-          password: password,
-          non_interactive: false,
-          keys_only: false,
-          key_files: [],
-          auth_methods: %i{password keyboard_interactive},
-        }
-      end
-
-      def force_winrm_password_opts(password)
-        {
-          password: password,
-        }
-      end
-
-      # This is for deprecating config options. The fallback_key can be used
-      # to pull an old knife config option out of the config file when the
-      # cli value has been renamed.  This is different from the deprecated
-      # cli values, since these are for config options that have no corresponding
-      # cli value.
-      #
-      # DO NOT USE - this whole API is considered deprecated
-      #
-      # @api deprecated
-      #
-      def config_value(key, fallback_key = nil, default = nil)
-        Chef.deprecated(:knife_bootstrap_apis, "Use of config_value is deprecated.  Knife plugin authors should access the config hash directly, which does correct merging of cli and config options.")
-        if config.key?(key)
-          # the first key is the primary key so we check the merged hash first
-          config[key]
-        elsif config.key?(fallback_key)
-          # we get the old config option here (the deprecated cli option shouldn't exist)
-          config[fallback_key]
-        else
-          default
-        end
-      end
-
-      def upload_bootstrap(content)
-        script_name = connection.windows? ? "bootstrap.bat" : "bootstrap.sh"
-        remote_path = connection.normalize_path(File.join(connection.temp_dir, script_name))
-        connection.upload_file_content!(content, remote_path)
-        remote_path
-      end
-
-      # build the command string for bootstrapping
-      # @return String
-      def bootstrap_command(remote_path)
-        if connection.windows?
-          "cmd.exe /C #{remote_path}"
-        else
-          cmd = "sh #{remote_path}"
-
-          if config[:su_user]
-            # su - USER is subject to required an interactive console
-            # Otherwise, it will raise: su: must be run from a terminal
-            set_transport_options(pty: true)
-            cmd = "su - #{config[:su_user]} -c '#{cmd}'"
-            cmd = "sudo " << cmd if config[:use_sudo]
-          end
-
-          cmd
-        end
-      end
-
-      private
-
-      # To avoid cluttering the CLI options, some flags (such as port and user)
-      # are shared between protocols.  However, there is still a need to allow the operator
-      # to specify defaults separately, since they may not be the same values for different
-      # protocols.
-
-      # These keys are available in Chef::Config, and are prefixed with the protocol name.
-      # For example, :user CLI option will map to :winrm_user and :ssh_user Chef::Config keys,
-      # based on the connection protocol in use.
-
-      # @api private
-      def config_for_protocol(option)
-        if option == :port
-          config[:connection_port] || config[knife_key_for_protocol(option)]
-        else
-          config[:connection_user] || config[knife_key_for_protocol(option)]
-        end
-      end
-
-      # @api private
-      def knife_key_for_protocol(option)
-        "#{connection_protocol}_#{option}".to_sym
-      end
-
-      # True if policy_name and run_list are both given
-      def policyfile_and_run_list_given?
-        run_list_given? && policyfile_options_given?
-      end
-
-      def run_list_given?
-        !config[:run_list].nil? && !config[:run_list].empty?
-      end
-
-      def policyfile_options_given?
-        !!config[:policy_name]
-      end
-
-      # True if one of policy_name or policy_group was given, but not both
-      def incomplete_policyfile_options?
-        (!!config[:policy_name] ^ config[:policy_group])
-      end
-
-      # session_timeout option has a default that may not arrive, particularly if
-      # we're being invoked from a plugin that doesn't merge_config.
-      def session_timeout
-        timeout = config[:session_timeout]
-        return options[:session_timeout][:default] if timeout.nil?
-
-        timeout.to_i
-      end
-
-      # Train::Transports::SSH::Connection#transport_options
-      # Append the options to connection transport_options
-      #
-      # @param opts [Hash] the opts to be added to connection transport_options.
-      # @return [Hash] transport_options if the opts contains any option to be set.
-      #
-      def set_transport_options(opts)
-        return unless opts.is_a?(Hash) || !opts.empty?
-
-        connection&.connection&.transport_options&.merge! opts
-      end
-    end
-  end
-end