chef 16.11.7-universal-mingw32 → 17.2.29-universal-mingw32

data/bin/knife

@@ -1,24 +0,0 @@
-#!/usr/bin/env ruby
-#
-# ./knife - Chef CLI interface
-#
-# Author:: Adam Jacob (<adam@chef.io>)
-# Copyright:: Copyright 2009-2018, Chef Software Inc.
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-$:.unshift(File.expand_path(File.join(__dir__, "..", "lib")))
-require "chef/application/knife"
-
-Chef::Application::Knife.new.run

data/lib/chef/application/knife.rb

@@ -1,234 +0,0 @@
-#
-# Author:: Adam Jacob (<adam@chef.io)
-# Copyright:: Copyright (c) Chef Software Inc.
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-require_relative "../knife"
-require_relative "../application"
-require "mixlib/log"
-require "ohai/config"
-module Net
-  autoload :HTTP, "net/http"
-end
-require "chef-utils/dist" unless defined?(ChefUtils::Dist)
-
-class Chef::Application::Knife < Chef::Application
-
-  NO_COMMAND_GIVEN = "You need to pass a sub-command (e.g., knife SUB-COMMAND)\n".freeze
-
-  banner "Usage: knife sub-command (options)"
-
-  option :config_file,
-    short: "-c CONFIG",
-    long: "--config CONFIG",
-    description: "The configuration file to use.",
-    proc: lambda { |path| File.expand_path(path, Dir.pwd) }
-
-  option :config_option,
-    long: "--config-option OPTION=VALUE",
-    description: "Override a single configuration option.",
-    proc: lambda { |option, existing|
-      (existing ||= []) << option
-      existing
-    }
-
-  verbosity_level = 0
-  option :verbosity,
-    short: "-V",
-    long: "--verbose",
-    description: "More verbose output. Use twice (-VV) for additional verbosity and three times (-VVV) for maximum verbosity.",
-    proc: Proc.new { verbosity_level += 1 },
-    default: 0
-
-  option :color,
-    long: "--[no-]color",
-    boolean: true,
-    default: true,
-    description: "Use colored output, defaults to enabled."
-
-  option :environment,
-    short: "-E ENVIRONMENT",
-    long: "--environment ENVIRONMENT",
-    description: "Set the #{ChefUtils::Dist::Infra::PRODUCT} environment (except for in searches, where this will be flagrantly ignored)."
-
-  option :editor,
-    short: "-e EDITOR",
-    long: "--editor EDITOR",
-    description: "Set the editor to use for interactive commands.",
-    default: ENV["EDITOR"]
-
-  option :disable_editing,
-    short: "-d",
-    long: "--disable-editing",
-    description: "Do not open EDITOR, just accept the data as is.",
-    boolean: true,
-    default: false
-
-  option :help,
-    short: "-h",
-    long: "--help",
-    description: "Show this help message.",
-    on: :tail,
-    boolean: true
-
-  option :node_name,
-    short: "-u USER",
-    long: "--user USER",
-    description: "#{ChefUtils::Dist::Server::PRODUCT} API client username."
-
-  option :client_key,
-    short: "-k KEY",
-    long: "--key KEY",
-    description: "#{ChefUtils::Dist::Server::PRODUCT} API client key.",
-    proc: lambda { |path| File.expand_path(path, Dir.pwd) }
-
-  option :chef_server_url,
-    short: "-s URL",
-    long: "--server-url URL",
-    description: "#{ChefUtils::Dist::Server::PRODUCT} URL."
-
-  option :yes,
-    short: "-y",
-    long: "--yes",
-    description: "Say yes to all prompts for confirmation."
-
-  option :defaults,
-    long: "--defaults",
-    description: "Accept default values for all questions."
-
-  option :print_after,
-    long: "--print-after",
-    description: "Show the data after a destructive operation."
-
-  option :format,
-    short: "-F FORMAT",
-    long: "--format FORMAT",
-    description: "Which format to use for output.",
-    in: %w{summary text json yaml pp},
-    default: "summary"
-
-  option :local_mode,
-    short: "-z",
-    long: "--local-mode",
-    description: "Point knife commands at local repository instead of #{ChefUtils::Dist::Server::PRODUCT}.",
-    boolean: true
-
-  option :chef_zero_host,
-    long: "--chef-zero-host HOST",
-    description: "Host to start #{ChefUtils::Dist::Zero::PRODUCT} on."
-
-  option :chef_zero_port,
-    long: "--chef-zero-port PORT",
-    description: "Port (or port range) to start #{ChefUtils::Dist::Zero::PRODUCT} on. Port ranges like 1000,1010 or 8889-9999 will try all given ports until one works."
-
-  option :listen,
-    long: "--[no-]listen",
-    description: "Whether a local mode (-z) server binds to a port.",
-    boolean: false
-
-  option :version,
-    short: "-v",
-    long: "--version",
-    description: "Show #{ChefUtils::Dist::Infra::PRODUCT} version.",
-    boolean: true,
-    proc: lambda { |v| puts "#{ChefUtils::Dist::Infra::PRODUCT}: #{::Chef::VERSION}" },
-    exit: 0
-
-  option :fips,
-    long: "--[no-]fips",
-    description: "Enable FIPS mode.",
-    boolean: true,
-    default: nil
-
-  option :profile,
-    long: "--profile PROFILE",
-    description: "The credentials profile to select."
-
-  # Run knife
-  def run
-    ChefConfig::PathHelper.per_tool_home_environment = "KNIFE_HOME"
-    Mixlib::Log::Formatter.show_time = false
-    validate_and_parse_options
-    quiet_traps
-    Chef::Knife.run(ARGV, options)
-    exit 0
-  end
-
-  private
-
-  def quiet_traps
-    trap("TERM") do
-      exit 1
-    end
-
-    trap("INT") do
-      exit 2
-    end
-  end
-
-  def validate_and_parse_options
-    # Checking ARGV validity *before* parse_options because parse_options
-    # mangles ARGV in some situations
-    if no_command_given?
-      print_help_and_exit(1, NO_COMMAND_GIVEN)
-    elsif no_subcommand_given?
-      if want_help? || want_version?
-        print_help_and_exit(0)
-      else
-        print_help_and_exit(2, NO_COMMAND_GIVEN)
-      end
-    end
-  end
-
-  def no_subcommand_given?
-    ARGV[0] =~ /^-/
-  end
-
-  def no_command_given?
-    ARGV.empty?
-  end
-
-  def want_help?
-    ARGV[0] =~ /^(--help|-h)$/
-  end
-
-  def want_version?
-    ARGV[0] =~ /^(--version|-v)$/
-  end
-
-  def print_help_and_exit(exitcode = 1, fatal_message = nil)
-    Chef::Log.error(fatal_message) if fatal_message
-
-    begin
-      parse_options
-    rescue OptionParser::InvalidOption => e
-      puts "#{e}\n"
-    end
-
-    if want_help?
-      puts "#{ChefUtils::Dist::Infra::PRODUCT}: #{Chef::VERSION}"
-      puts
-      puts "Docs: #{ChefUtils::Dist::Org::KNIFE_DOCS}"
-      puts "Patents: #{ChefUtils::Dist::Org::PATENTS}"
-      puts
-    end
-
-    puts opt_parser
-    puts
-    Chef::Knife.list_commands
-    exit exitcode
-  end
-
-end

data/lib/chef/application/windows_service.rb

@@ -1,338 +0,0 @@
-#
-# Author:: Christopher Maier (<maier@lambda.local>)
-# Copyright:: Copyright (c) Chef Software Inc.
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-require_relative "../../chef"
-require_relative "../monologger"
-require_relative "../application"
-require_relative "../client"
-require_relative "../config"
-require_relative "../handler/error_report"
-require_relative "../log"
-require_relative "../http"
-require "mixlib/cli" unless defined?(Mixlib::CLI)
-require "socket" unless defined?(Socket)
-require "uri" unless defined?(URI)
-require "win32/daemon"
-require_relative "../mixin/shell_out"
-require "chef-utils/dist" unless defined?(ChefUtils::Dist)
-
-class Chef
-  class Application
-    class WindowsService < ::Win32::Daemon
-      include Mixlib::CLI
-      include Chef::Mixin::ShellOut
-
-      option :config_file,
-        short: "-c CONFIG",
-        long: "--config CONFIG",
-        default: "#{Chef::Config.etc_chef_dir}/client.rb",
-        description: "The configuration file to use for #{ChefUtils::Dist::Infra::PRODUCT} runs."
-
-      option :log_location,
-        short: "-L LOGLOCATION",
-        long: "--logfile LOGLOCATION",
-        description: "Set the log file location."
-
-      option :splay,
-        short: "-s SECONDS",
-        long: "--splay SECONDS",
-        description: "The splay time for running at intervals, in seconds.",
-        proc: lambda { |s| s.to_i }
-
-      option :interval,
-        short: "-i SECONDS",
-        long: "--interval SECONDS",
-        description: "Set the number of seconds to wait between #{ChefUtils::Dist::Infra::PRODUCT} runs.",
-        proc: lambda { |s| s.to_i }
-
-      DEFAULT_LOG_LOCATION ||= "#{Chef::Config.c_chef_dir}/client.log".freeze
-
-      def service_init
-        @service_action_mutex = Mutex.new
-        @service_signal = ConditionVariable.new
-
-        reconfigure
-        Chef::Log.info("#{ChefUtils::Dist::Infra::CLIENT} Service initialized")
-      end
-
-      def service_main(*startup_parameters)
-        # Chef::Config is initialized during service_init
-        # Set the initial timeout to splay sleep time
-        timeout = rand Chef::Config[:splay]
-
-        while running?
-          # Grab the service_action_mutex to make a chef-client run
-          @service_action_mutex.synchronize do
-
-            Chef::Log.info("Next #{ChefUtils::Dist::Infra::CLIENT} run will happen in #{timeout} seconds")
-            @service_signal.wait(@service_action_mutex, timeout)
-
-            # Continue only if service is RUNNING
-            next if state != RUNNING
-
-            # Reconfigure each time through to pick up any changes in the client file
-            Chef::Log.info("Reconfiguring with startup parameters")
-            reconfigure(startup_parameters)
-            timeout = Chef::Config[:interval]
-
-            # Honor splay sleep config
-            timeout += rand Chef::Config[:splay]
-
-            # run chef-client only if service is in RUNNING state
-            next if state != RUNNING
-
-            Chef::Log.info("#{ChefUtils::Dist::Infra::CLIENT} service is starting a #{ChefUtils::Dist::Infra::CLIENT} run...")
-            run_chef_client
-          rescue SystemExit => e
-            # Do not raise any of the errors here in order to
-            # prevent service crash
-            Chef::Log.error("#{e.class}: #{e}")
-          rescue Exception => e
-            Chef::Log.error("#{e.class}: #{e}")
-
-          end
-        end
-
-        # Daemon class needs to have all the signal callbacks return
-        # before service_main returns.
-        Chef::Log.trace("Giving signal callbacks some time to exit...")
-        sleep 1
-        Chef::Log.trace("Exiting service...")
-      end
-
-      ################################################################################
-      # Control Signal Callback Methods
-      ################################################################################
-
-      def service_stop
-        run_warning_displayed = false
-        Chef::Log.info("STOP request from operating system.")
-        loop do
-          # See if a run is in flight
-          if @service_action_mutex.try_lock
-            # Run is not in flight. Wake up service_main to exit.
-            @service_signal.signal
-            @service_action_mutex.unlock
-            break
-          else
-            unless run_warning_displayed
-              Chef::Log.info("Currently a #{ChefUtils::Dist::Infra::PRODUCT} run is happening on this system.")
-              Chef::Log.info("Service will stop when run is completed.")
-              run_warning_displayed = true
-            end
-
-            Chef::Log.trace("Waiting for #{ChefUtils::Dist::Infra::PRODUCT} run...")
-            sleep 1
-          end
-        end
-        Chef::Log.info("Service is stopping....")
-      end
-
-      def service_pause
-        Chef::Log.info("PAUSE request from operating system.")
-
-        # We don't need to wake up the service_main if it's waiting
-        # since this is a PAUSE signal.
-
-        if @service_action_mutex.locked?
-          Chef::Log.info("Currently a #{ChefUtils::Dist::Infra::PRODUCT} run is happening.")
-          Chef::Log.info("Service will pause once it's completed.")
-        else
-          Chef::Log.info("Service is pausing....")
-        end
-      end
-
-      def service_resume
-        # We don't need to wake up the service_main if it's waiting
-        # since this is a RESUME signal.
-
-        Chef::Log.info("RESUME signal received from the OS.")
-        Chef::Log.info("Service is resuming....")
-      end
-
-      def service_shutdown
-        Chef::Log.info("SHUTDOWN signal received from the OS.")
-
-        # Treat shutdown similar to stop.
-
-        service_stop
-      end
-
-      ################################################################################
-      # Internal Methods
-      ################################################################################
-
-      private
-
-      # Initializes Chef::Client instance and runs it
-      def run_chef_client
-        # The chef client will be started in a new process. We have used shell_out to start the chef-client.
-        # The log_location and config_file of the parent process is passed to the new chef-client process.
-        # We need to add the --no-fork, as by default it is set to fork=true.
-
-        Chef::Log.info "Starting #{ChefUtils::Dist::Infra::CLIENT} in a new process"
-        # Pass config params to the new process
-        config_params = " --no-fork"
-        config_params += " -c #{Chef::Config[:config_file]}" unless Chef::Config[:config_file].nil?
-        # log_location might be an event logger and if so we cannot pass as a command argument
-        # but shed no tears! If the logger is an event logger, it must have been configured
-        # as such in the config file and chef-client will use that when no arg is passed here
-        config_params += " -L #{resolve_log_location}" if resolve_log_location.is_a?(String)
-
-        # Starts a new process and waits till the process exits
-
-        result = shell_out(
-          "#{ChefUtils::Dist::Infra::CLIENT}.bat #{config_params}",
-          timeout: Chef::Config[:windows_service][:watchdog_timeout],
-          logger: Chef::Log
-        )
-        Chef::Log.trace (result.stdout).to_s
-        Chef::Log.trace (result.stderr).to_s
-      rescue Mixlib::ShellOut::CommandTimeout => e
-        Chef::Log.error "#{ChefUtils::Dist::Infra::CLIENT} timed out\n(#{e})"
-        Chef::Log.error(<<-EOF)
-            Your #{ChefUtils::Dist::Infra::CLIENT} run timed out. You can increase the time #{ChefUtils::Dist::Infra::CLIENT} is given
-            to complete by configuring windows_service.watchdog_timeout in your client.rb.
-        EOF
-      rescue Mixlib::ShellOut::ShellCommandFailed => e
-        Chef::Log.warn "Not able to start #{ChefUtils::Dist::Infra::CLIENT} in new process (#{e})"
-      rescue => e
-        Chef::Log.error e
-      ensure
-        # Once process exits, we log the current process' pid
-        Chef::Log.info "Child process exited (pid: #{Process.pid})"
-      end
-
-      def apply_config(config_file_path)
-        Chef::Config.from_file(config_file_path)
-        Chef::Config.merge!(config)
-      end
-
-      # Lifted from Chef::Application, with addition of optional startup parameters
-      # for playing nicely with Windows Services
-      def reconfigure(startup_parameters = [])
-        configure_chef startup_parameters
-        configure_logging
-
-        Chef::Config[:chef_server_url] = config[:chef_server_url] if config.key? :chef_server_url
-        unless Chef::Config[:exception_handlers].any? { |h| Chef::Handler::ErrorReport === h }
-          Chef::Config[:exception_handlers] << Chef::Handler::ErrorReport.new
-        end
-
-        Chef::Config[:interval] ||= 1800
-      end
-
-      # Lifted from application.rb
-      # See application.rb for related comments.
-
-      def configure_logging
-        Chef::Log.init(MonoLogger.new(resolve_log_location))
-        if want_additional_logger?
-          configure_stdout_logger
-        end
-        Chef::Log.level = resolve_log_level
-      end
-
-      def configure_stdout_logger
-        stdout_logger = MonoLogger.new(STDOUT)
-        stdout_logger.formatter = Chef::Log.logger.formatter
-        Chef::Log.loggers << stdout_logger
-      end
-
-      # Based on config and whether or not STDOUT is a tty, should we setup a
-      # secondary logger for stdout?
-      def want_additional_logger?
-        ( Chef::Config[:log_location] != STDOUT ) && STDOUT.tty? && !Chef::Config[:daemonize]
-      end
-
-      # Use of output formatters is assumed if `force_formatter` is set or if
-      # `force_logger` is not set
-      def using_output_formatter?
-        Chef::Config[:force_formatter] || !Chef::Config[:force_logger]
-      end
-
-      def auto_log_level?
-        Chef::Config[:log_level] == :auto
-      end
-
-      def resolve_log_location
-        # STDOUT is the default log location, but makes no sense for a windows service
-        Chef::Config[:log_location] == STDOUT ? DEFAULT_LOG_LOCATION : Chef::Config[:log_location]
-      end
-
-      # if log_level is `:auto`, convert it to :warn (when using output formatter)
-      # or :info (no output formatter). See also +using_output_formatter?+
-      def resolve_log_level
-        if auto_log_level?
-          if using_output_formatter?
-            :warn
-          else
-            :info
-          end
-        else
-          Chef::Config[:log_level]
-        end
-      end
-
-      def configure_chef(startup_parameters)
-        # Bit of a hack ahead:
-        # It is possible to specify a service's binary_path_name with arguments, like "foo.exe -x argX".
-        # It is also possible to specify startup parameters separately, either via the Services manager
-        # or by using the registry (I think).
-
-        # In order to accommodate all possible sources of parameterization, we first parse any command line
-        # arguments.  We then parse any startup parameters.  This works, because Mixlib::CLI reuses its internal
-        # 'config' hash; thus, anything in startup parameters will override any command line parameters that
-        # might be set via the service's binary_path_name
-        #
-        # All these parameters then get layered on top of those from Chef::Config
-
-        parse_options # Operates on ARGV by default
-        parse_options startup_parameters
-
-        begin
-          case config[:config_file]
-          when %r{^(http|https)://}
-            Chef::HTTP.new("").streaming_request(config[:config_file]) { |f| apply_config(f.path) }
-          else
-            ::File.open(config[:config_file]) { |f| apply_config(f.path) }
-          end
-        rescue Errno::ENOENT
-          Chef::Log.warn("*****************************************")
-          Chef::Log.warn("Did not find config file: #{config[:config_file]}. Using command line options instead.")
-          Chef::Log.warn("*****************************************")
-
-          Chef::Config.merge!(config)
-        rescue SocketError
-          Chef::Application.fatal!("Error getting config file #{Chef::Config[:config_file]}")
-        rescue Chef::Exceptions::ConfigurationError => error
-          Chef::Application.fatal!("Error processing config file #{Chef::Config[:config_file]} with error #{error.message}")
-        rescue Exception => error
-          Chef::Application.fatal!("Unknown error processing config file #{Chef::Config[:config_file]} with error #{error.message}")
-        end
-      end
-
-    end
-  end
-end
-
-# To run this file as a service, it must be called as a script from within
-# the Windows Service framework.  In that case, kick off the main loop!
-if __FILE__ == $0
-  Chef::Application::WindowsService.mainloop
-end