chef 12.4.0.rc.0-universal-mingw32

data/lib/chef/provider/package/yum-dump.py

@@ -0,0 +1,307 @@
+#
+# Author:: Matthew Kent (<mkent@magoazul.com>)
+# Copyright:: Copyright (c) 2009, 2011 Matthew Kent
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# yum-dump.py
+# Inspired by yumhelper.py by David Lutterkort
+#
+# Produce a list of installed, available and re-installable packages using yum
+# and dump the results to stdout.
+#
+# yum-dump invokes yum similarly to the command line interface which makes it
+# subject to most of the configuration parameters in yum.conf. yum-dump will
+# also load yum plugins in the same manor as yum - these can affect the output.
+#
+# Can be run as non root, but that won't update the cache.
+#
+# Intended to support yum 2.x and 3.x
+
+import os
+import sys
+import time
+import yum
+import re
+import errno
+
+from yum import Errors
+from optparse import OptionParser
+from distutils import version
+
+YUM_PID_FILE='/var/run/yum.pid'
+
+YUM_VER = version.StrictVersion(yum.__version__)
+YUM_MAJOR = YUM_VER.version[0]
+
+if YUM_MAJOR > 3 or YUM_MAJOR < 2:
+  print >> sys.stderr, "yum-dump Error: Can't match supported yum version" \
+    " (%s)" % yum.__version__
+  sys.exit(1)
+
+# Required for Provides output
+if YUM_MAJOR == 2:
+  import rpm
+  import rpmUtils.miscutils
+
+def setup(yb, options):
+  # Only want our output
+  #
+  if YUM_MAJOR == 3:
+    try:
+      if YUM_VER >= version.StrictVersion("3.2.22"):
+        yb.preconf.errorlevel=0
+        yb.preconf.debuglevel=0
+
+        # initialize the config
+        yb.conf
+      else:
+        yb.doConfigSetup(errorlevel=0, debuglevel=0)
+    except yum.Errors.ConfigError, e:
+      # suppresses an ignored exception at exit
+      yb.preconf = None
+      print >> sys.stderr, "yum-dump Config Error: %s" % e
+      return 1
+    except ValueError, e:
+      yb.preconf = None
+      print >> sys.stderr, "yum-dump Options Error: %s" % e
+      return 1
+  elif YUM_MAJOR == 2:
+    yb.doConfigSetup()
+
+    def __log(a,b): pass
+
+    yb.log = __log
+    yb.errorlog = __log
+
+  # Give Chef every possible package version, it can decide what to do with them
+  if YUM_MAJOR == 3:
+    yb.conf.showdupesfromrepos = True
+  elif YUM_MAJOR == 2:
+    yb.conf.setConfigOption('showdupesfromrepos', True)
+
+  # Optionally run only on cached repositories, but non root must use the cache
+  if os.geteuid() != 0:
+    if YUM_MAJOR == 3:
+      yb.conf.cache = True
+    elif YUM_MAJOR == 2:
+      yb.conf.setConfigOption('cache', True)
+  else:
+    if YUM_MAJOR == 3:
+      yb.conf.cache = options.cache
+    elif YUM_MAJOR == 2:
+      yb.conf.setConfigOption('cache', options.cache)
+
+  # Handle repo toggle via id or glob exactly like yum
+  for opt, repos in options.repo_control:
+      for repo in repos:
+        if opt == '--enablerepo':
+            yb.repos.enableRepo(repo)
+        elif opt == '--disablerepo':
+            yb.repos.disableRepo(repo)
+
+  return 0
+
+def dump_packages(yb, list, output_provides):
+  packages = {}
+
+  if YUM_MAJOR == 2:
+    yb.doTsSetup()
+    yb.doRepoSetup()
+    yb.doSackSetup()
+
+  db = yb.doPackageLists(list)
+
+  for pkg in db.installed:
+    pkg.type = 'i'
+    packages[str(pkg)] = pkg
+
+  if YUM_VER >= version.StrictVersion("3.2.21"):
+    for pkg in db.available:
+      pkg.type = 'a'
+      packages[str(pkg)] = pkg
+
+    # These are both installed and available
+    for pkg in db.reinstall_available:
+      pkg.type = 'r'
+      packages[str(pkg)] = pkg
+  else:
+    # Old style method - no reinstall list
+    for pkg in yb.pkgSack.returnPackages():
+
+      if str(pkg) in packages:
+        if packages[str(pkg)].type == "i":
+          packages[str(pkg)].type = 'r'
+          continue
+
+      pkg.type = 'a'
+      packages[str(pkg)] = pkg
+
+  unique_packages = packages.values()
+
+  unique_packages.sort(lambda x, y: cmp(x.name, y.name))
+
+  for pkg in unique_packages:
+    if output_provides == "all" or \
+        (output_provides == "installed" and (pkg.type == "i" or pkg.type == "r")):
+
+      # yum 2 doesn't have provides_print, implement it ourselves using methods
+      # based on requires gathering in packages.py
+      if YUM_MAJOR == 2:
+        provlist = []
+
+        # Installed and available are gathered in different ways
+        if pkg.type == 'i' or pkg.type == 'r':
+          names = pkg.hdr[rpm.RPMTAG_PROVIDENAME]
+          flags = pkg.hdr[rpm.RPMTAG_PROVIDEFLAGS]
+          ver = pkg.hdr[rpm.RPMTAG_PROVIDEVERSION]
+          if names is not None:
+            tmplst = zip(names, flags, ver)
+
+          for (n, f, v) in tmplst:
+            prov = rpmUtils.miscutils.formatRequire(n, v, f)
+            provlist.append(prov)
+        # This is slow :(
+        elif pkg.type == 'a':
+          for prcoTuple in pkg.returnPrco('provides'):
+              prcostr = pkg.prcoPrintable(prcoTuple)
+              provlist.append(prcostr)
+
+        provides = provlist
+      else:
+        provides = pkg.provides_print
+    else:
+      provides = "[]"
+
+    print '%s %s %s %s %s %s %s %s' % (
+      pkg.name,
+      pkg.epoch,
+      pkg.version,
+      pkg.release,
+      pkg.arch,
+      provides,
+      pkg.type,
+      pkg.repoid )
+
+  return 0
+
+def yum_dump(options):
+  lock_obtained = False
+
+  yb = yum.YumBase()
+
+  status = setup(yb, options)
+  if status != 0:
+    return status
+
+  if options.output_options:
+    print "[option installonlypkgs] %s" % " ".join(yb.conf.installonlypkgs)
+
+  # Non root can't handle locking on rhel/centos 4
+  if os.geteuid() != 0:
+    return dump_packages(yb, options.package_list, options.output_provides)
+
+  # Wrap the collection and output of packages in yum's global lock to prevent
+  # any inconsistencies.
+  try:
+    # Spin up to --yum-lock-timeout option
+    countdown = options.yum_lock_timeout
+    while True:
+      try:
+        yb.doLock(YUM_PID_FILE)
+        lock_obtained = True
+      except Errors.LockError, e:
+        time.sleep(1)
+        countdown -= 1
+        if countdown == 0:
+           print >> sys.stderr, "yum-dump Locking Error! Couldn't obtain an " \
+             "exclusive yum lock in %d seconds. Giving up." % options.yum_lock_timeout
+           return 200
+      else:
+        break
+
+    return dump_packages(yb, options.package_list, options.output_provides)
+
+  # Ensure we clear the lock and cleanup any resources
+  finally:
+    try:
+      yb.closeRpmDB()
+      if lock_obtained == True:
+        yb.doUnlock(YUM_PID_FILE)
+    except Errors.LockError, e:
+      print >> sys.stderr, "yum-dump Unlock Error: %s" % e
+      return 200
+
+# Preserve order of enable/disable repo args like yum does
+def gather_repo_opts(option, opt, value, parser):
+  if getattr(parser.values, option.dest, None) is None:
+    setattr(parser.values, option.dest, [])
+  getattr(parser.values, option.dest).append((opt, value.split(',')))
+
+def main():
+  usage = "Usage: %prog [options]\n" + \
+          "Output a list of installed, available and re-installable packages via yum"
+  parser = OptionParser(usage=usage)
+  parser.add_option("-C", "--cache",
+                    action="store_true", dest="cache", default=False,
+                    help="run entirely from cache, don't update cache")
+  parser.add_option("-o", "--options",
+                    action="store_true", dest="output_options", default=False,
+                    help="output select yum options useful to Chef")
+  parser.add_option("-p", "--installed-provides",
+                    action="store_const", const="installed", dest="output_provides", default="none",
+                    help="output Provides for installed packages, big/wide output")
+  parser.add_option("-P", "--all-provides",
+                    action="store_const", const="all", dest="output_provides", default="none",
+                    help="output Provides for all package, slow, big/wide output")
+  parser.add_option("-i", "--installed",
+                    action="store_const", const="installed", dest="package_list", default="all",
+                    help="output only installed packages")
+  parser.add_option("-a", "--available",
+                    action="store_const", const="available", dest="package_list", default="all",
+                    help="output only available and re-installable packages")
+  parser.add_option("--enablerepo",
+                    action="callback",  callback=gather_repo_opts, type="string", dest="repo_control", default=[],
+                    help="enable disabled repositories by id or glob")
+  parser.add_option("--disablerepo",
+                    action="callback",  callback=gather_repo_opts, type="string", dest="repo_control", default=[],
+                    help="disable repositories by id or glob")
+  parser.add_option("--yum-lock-timeout",
+                    action="store",  type="int", dest="yum_lock_timeout", default=30,
+                    help="Time in seconds to wait for yum process lock")
+
+  (options, args) = parser.parse_args()
+
+  try:
+    return yum_dump(options)
+
+  except yum.Errors.RepoError, e:
+    print >> sys.stderr, "yum-dump Repository Error: %s" % e
+    return 1
+
+  except yum.Errors.YumBaseError, e:
+    print >> sys.stderr, "yum-dump General Error: %s" % e
+    return 1
+
+try:
+  status = main()
+# Suppress a nasty broken pipe error when output is piped to utilities like 'head'
+except IOError, e:
+  if e.errno == errno.EPIPE:
+    sys.exit(1)
+  else:
+    raise
+
+sys.exit(status)

data/lib/chef/provider/package/yum.rb

@@ -0,0 +1,1401 @@
+#
+# Author:: Adam Jacob (<adam@opscode.com>)
+# Copyright:: Copyright (c) 2008 Opscode, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/config'
+require 'chef/provider/package'
+require 'chef/mixin/shell_out'
+require 'chef/mixin/which'
+require 'chef/resource/package'
+require 'singleton'
+require 'chef/mixin/get_source_from_package'
+
+class Chef
+  class Provider
+    class Package
+      class Yum < Chef::Provider::Package
+
+        provides :yum_package, os: "linux"
+
+        class RPMUtils
+          class << self
+
+            # RPM::Version version_parse equivalent
+            def version_parse(evr)
+              return if evr.nil?
+
+              epoch = nil
+              # assume this is a version
+              version = evr
+              release = nil
+
+              lead = 0
+              tail = evr.size
+
+              if evr =~ %r{^([\d]+):}
+                epoch = $1.to_i
+                lead = $1.length + 1
+              elsif evr[0].ord == ":".ord
+                epoch = 0
+                lead = 1
+              end
+
+              if evr =~ %r{:?.*-(.*)$}
+                release = $1
+                tail = evr.length - release.length - lead - 1
+
+                if release.empty?
+                  release = nil
+                end
+              end
+
+              version = evr[lead,tail]
+              if version.empty?
+                version = nil
+              end
+
+              [ epoch, version, release ]
+            end
+
+            # verify
+            def isalnum(x)
+              isalpha(x) or isdigit(x)
+            end
+
+            def isalpha(x)
+              v = x.ord
+              (v >= 65 and v <= 90) or (v >= 97 and v <= 122)
+            end
+
+            def isdigit(x)
+              v = x.ord
+              v >= 48 and v <= 57
+            end
+
+            # based on the reference spec in lib/rpmvercmp.c in rpm 4.9.0
+            def rpmvercmp(x, y)
+              # easy! :)
+              return 0 if x == y
+
+              if x.nil?
+                x = ""
+              end
+
+              if y.nil?
+                y = ""
+              end
+
+              # not so easy :(
+              #
+              # takes 2 strings like
+              #
+              # x = "1.20.b18.el5"
+              # y = "1.20.b17.el5"
+              #
+              # breaks into purely alpha and numeric segments and compares them using
+              # some rules
+              #
+              # * 10 > 1
+              # * 1 > a
+              # * z > a
+              # * Z > A
+              # * z > Z
+              # * leading zeros are ignored
+              # * separators (periods, commas) are ignored
+              # * "1.20.b18.el5.extrastuff" > "1.20.b18.el5"
+
+              x_pos = 0                # overall string element reference position
+              x_pos_max = x.length - 1 # number of elements in string, starting from 0
+              x_seg_pos = 0            # segment string element reference position
+              x_comp = nil             # segment to compare
+
+              y_pos = 0
+              y_seg_pos = 0
+              y_pos_max = y.length - 1
+              y_comp = nil
+
+              while (x_pos <= x_pos_max and y_pos <= y_pos_max)
+                # first we skip over anything non alphanumeric
+                while (x_pos <= x_pos_max) and (isalnum(x[x_pos]) == false)
+                  x_pos += 1 # +1 over pos_max if end of string
+                end
+                while (y_pos <= y_pos_max) and (isalnum(y[y_pos]) == false)
+                  y_pos += 1
+                end
+
+                # if we hit the end of either we are done matching segments
+                if (x_pos == x_pos_max + 1) or (y_pos == y_pos_max + 1)
+                  break
+                end
+
+                # we are now at the start of a alpha or numeric segment
+                x_seg_pos = x_pos
+                y_seg_pos = y_pos
+
+                # grab segment so we can compare them
+                if isdigit(x[x_seg_pos].ord)
+                  x_seg_is_num = true
+
+                  # already know it's a digit
+                  x_seg_pos += 1
+
+                  # gather up our digits
+                  while (x_seg_pos <= x_pos_max) and isdigit(x[x_seg_pos])
+                    x_seg_pos += 1
+                  end
+                  # copy the segment but not the unmatched character that x_seg_pos will
+                  # refer to
+                  x_comp = x[x_pos,x_seg_pos - x_pos]
+
+                  while (y_seg_pos <= y_pos_max) and isdigit(y[y_seg_pos])
+                    y_seg_pos += 1
+                  end
+                  y_comp = y[y_pos,y_seg_pos - y_pos]
+                else
+                  # we are comparing strings
+                  x_seg_is_num = false
+
+                  while (x_seg_pos <= x_pos_max) and isalpha(x[x_seg_pos])
+                    x_seg_pos += 1
+                  end
+                  x_comp = x[x_pos,x_seg_pos - x_pos]
+
+                  while (y_seg_pos <= y_pos_max) and isalpha(y[y_seg_pos])
+                    y_seg_pos += 1
+                  end
+                  y_comp = y[y_pos,y_seg_pos - y_pos]
+                end
+
+                # if y_seg_pos didn't advance in the above loop it means the segments are
+                # different types
+                if y_pos == y_seg_pos
+                  # numbers always win over letters
+                  return x_seg_is_num ? 1 : -1
+                end
+
+                # move the ball forward before we mess with the segments
+                x_pos += x_comp.length # +1 over pos_max if end of string
+                y_pos += y_comp.length
+
+                # we are comparing numbers - simply convert them
+                if x_seg_is_num
+                  x_comp = x_comp.to_i
+                  y_comp = y_comp.to_i
+                end
+
+                # compares ints or strings
+                # don't return if equal - try the next segment
+                if x_comp > y_comp
+                  return 1
+                elsif x_comp < y_comp
+                  return -1
+                end
+
+                # if we've reached here than the segments are the same - try again
+              end
+
+              # we must have reached the end of one or both of the strings and they
+              # matched up until this point
+
+              # segments matched completely but the segment separators were different -
+              # rpm reference code treats these as equal.
+              if (x_pos == x_pos_max + 1) and (y_pos == y_pos_max + 1)
+                return 0
+              end
+
+              # the most unprocessed characters left wins
+              if (x_pos_max - x_pos) > (y_pos_max - y_pos)
+                return 1
+              else
+                return -1
+              end
+            end
+
+          end # self
+        end # RPMUtils
+
+        class RPMVersion
+          include Comparable
+
+          def initialize(*args)
+            if args.size == 1
+              @e, @v, @r = RPMUtils.version_parse(args[0])
+            elsif args.size == 3
+              @e = args[0].to_i
+              @v = args[1]
+              @r = args[2]
+            else
+              raise ArgumentError, "Expecting either 'epoch-version-release' or 'epoch, " +
+                                   "version, release'"
+            end
+          end
+          attr_reader :e, :v, :r
+          alias :epoch :e
+          alias :version :v
+          alias :release :r
+
+          def self.parse(*args)
+            self.new(*args)
+          end
+
+          def <=>(y)
+            compare_versions(y)
+          end
+
+          def compare(y)
+            compare_versions(y, false)
+          end
+
+          def partial_compare(y)
+            compare_versions(y, true)
+          end
+
+          # RPM::Version rpm_version_to_s equivalent
+          def to_s
+            if @r.nil?
+              @v
+            else
+              "#{@v}-#{@r}"
+            end
+          end
+
+          def evr
+            "#{@e}:#{@v}-#{@r}"
+          end
+
+          private
+
+          # Rough RPM::Version rpm_version_cmp equivalent - except much slower :)
+          #
+          # partial lets epoch and version segment equality be good enough to return equal, eg:
+          #
+          # 2:1.2-1 == 2:1.2
+          # 2:1.2-1 == 2:
+          #
+          def compare_versions(y, partial=false)
+            x = self
+
+            # compare epoch
+            if (x.e.nil? == false and x.e > 0) and y.e.nil?
+              return 1
+            elsif x.e.nil? and (y.e.nil? == false and y.e > 0)
+              return -1
+            elsif x.e.nil? == false and y.e.nil? == false
+              if x.e < y.e
+                return -1
+              elsif x.e > y.e
+                return 1
+              end
+            end
+
+            # compare version
+            if partial and (x.v.nil? or y.v.nil?)
+              return 0
+            elsif x.v.nil? == false and y.v.nil?
+              return 1
+            elsif x.v.nil? and y.v.nil? == false
+              return -1
+            elsif x.v.nil? == false and y.v.nil? == false
+              cmp = RPMUtils.rpmvercmp(x.v, y.v)
+              return cmp if cmp != 0
+            end
+
+            # compare release
+            if partial and (x.r.nil? or y.r.nil?)
+              return 0
+            elsif x.r.nil? == false and y.r.nil?
+              return 1
+            elsif x.r.nil? and y.r.nil? == false
+              return -1
+            elsif x.r.nil? == false and y.r.nil? == false
+              cmp = RPMUtils.rpmvercmp(x.r, y.r)
+              return cmp
+            end
+
+            return 0
+          end
+        end
+
+        class RPMPackage
+          include Comparable
+
+          def initialize(*args)
+            if args.size == 4
+              @n = args[0]
+              @version = RPMVersion.new(args[1])
+              @a = args[2]
+              @provides = args[3]
+            elsif args.size == 6
+              @n = args[0]
+              e = args[1].to_i
+              v = args[2]
+              r = args[3]
+              @version = RPMVersion.new(e,v,r)
+              @a = args[4]
+              @provides = args[5]
+            else
+              raise ArgumentError, "Expecting either 'name, epoch-version-release, arch, provides' " +
+                                   "or 'name, epoch, version, release, arch, provides'"
+            end
+
+            # We always have one, ourselves!
+            if @provides.empty?
+              @provides = [ RPMProvide.new(@n, @version.evr, :==) ]
+            end
+          end
+          attr_reader :n, :a, :version, :provides
+          alias :name :n
+          alias :arch :a
+
+          def <=>(y)
+            compare(y)
+          end
+
+          def compare(y)
+            x = self
+
+            # easy! :)
+            return 0 if x.nevra == y.nevra
+
+            # compare name
+            if x.n.nil? == false and y.n.nil?
+              return 1
+            elsif x.n.nil? and y.n.nil? == false
+              return -1
+            elsif x.n.nil? == false and y.n.nil? == false
+              if x.n < y.n
+                return -1
+              elsif x.n > y.n
+                return 1
+              end
+            end
+
+            # compare version
+            if x.version > y.version
+              return 1
+            elsif x.version < y.version
+              return -1
+            end
+
+            # compare arch
+            if x.a.nil? == false and y.a.nil?
+              return 1
+            elsif x.a.nil? and y.a.nil? == false
+              return -1
+            elsif x.a.nil? == false and y.a.nil? == false
+              if x.a < y.a
+                return -1
+              elsif x.a > y.a
+                return 1
+              end
+            end
+
+            return 0
+          end
+
+          def to_s
+            nevra
+          end
+
+          def nevra
+            "#{@n}-#{@version.evr}.#{@a}"
+          end
+        end
+
+        # Simple implementation from rpm and ruby-rpm reference code
+        class RPMDependency
+          def initialize(*args)
+            if args.size == 3
+              @name = args[0]
+              @version = RPMVersion.new(args[1])
+              # Our requirement to other dependencies
+              @flag = args[2] || :==
+            elsif args.size == 5
+              @name = args[0]
+              e = args[1].to_i
+              v = args[2]
+              r = args[3]
+              @version = RPMVersion.new(e,v,r)
+              @flag = args[4] || :==
+            else
+              raise ArgumentError, "Expecting either 'name, epoch-version-release, flag' or " +
+                                   "'name, epoch, version, release, flag'"
+            end
+          end
+          attr_reader :name, :version, :flag
+
+          # Parses 2 forms:
+          #
+          # "mtr >= 2:0.71-3.0"
+          # "mta"
+          def self.parse(string)
+            if string =~ %r{^(\S+)\s+(>|>=|=|==|<=|<)\s+(\S+)$}
+              name = $1
+              if $2 == "="
+                flag = :==
+              else
+                flag = :"#{$2}"
+              end
+              version = $3
+
+              return self.new(name, version, flag)
+            else
+              name = string
+              return self.new(name, nil, nil)
+            end
+          end
+
+          # Test if another RPMDependency satisfies our requirements
+          def satisfy?(y)
+            unless y.kind_of?(RPMDependency)
+              raise ArgumentError, "Expecting an RPMDependency object"
+            end
+
+            x = self
+
+            # Easy!
+            if x.name != y.name
+              return false
+            end
+
+            # Partial compare
+            #
+            # eg: x.version 2.3 == y.version 2.3-1
+            sense = x.version.partial_compare(y.version)
+
+            # Thanks to rpmdsCompare() rpmds.c
+            if sense < 0 and (x.flag == :> || x.flag == :>=) || (y.flag == :<= || y.flag == :<)
+              return true
+            elsif sense > 0 and (x.flag == :< || x.flag == :<=) || (y.flag == :>= || y.flag == :>)
+              return true
+            elsif sense == 0 and (
+              ((x.flag == :== or x.flag == :<= or x.flag == :>=) and (y.flag == :== or y.flag == :<= or y.flag == :>=)) or
+              (x.flag == :< and y.flag == :<) or
+              (x.flag == :> and y.flag == :>)
+            )
+              return true
+            end
+
+            return false
+          end
+        end
+
+        class RPMProvide < RPMDependency; end
+        class RPMRequire < RPMDependency; end
+
+        class RPMDbPackage < RPMPackage
+          # <rpm parts>, installed, available
+          def initialize(*args)
+            @repoid = args.pop
+            # state
+            @available = args.pop
+            @installed = args.pop
+            super(*args)
+          end
+          attr_reader :repoid, :available, :installed
+        end
+
+        # Simple storage for RPMPackage objects - keeps them unique and sorted
+        class RPMDb
+          def initialize
+            # package name => [ RPMPackage, RPMPackage ] of different versions
+            @rpms = Hash.new
+            # package nevra => RPMPackage for lookups
+            @index = Hash.new
+            # provide name (aka feature) => [RPMPackage, RPMPackage] each providing this feature
+            @provides = Hash.new
+            # RPMPackages listed as available
+            @available = Set.new
+            # RPMPackages listed as installed
+            @installed = Set.new
+          end
+
+          def [](package_name)
+            self.lookup(package_name)
+          end
+
+          # Lookup package_name and return a descending array of package objects
+          def lookup(package_name)
+            pkgs = @rpms[package_name]
+            if pkgs
+              return pkgs.sort.reverse
+            else
+              return nil
+            end
+          end
+
+          def lookup_provides(provide_name)
+            @provides[provide_name]
+          end
+
+          # Using the package name as a key, and nevra for an index, keep a unique list of packages.
+          # The available/installed state can be overwritten for existing packages.
+          def push(*args)
+            args.flatten.each do |new_rpm|
+              unless new_rpm.kind_of?(RPMDbPackage)
+                raise ArgumentError, "Expecting an RPMDbPackage object"
+              end
+
+              @rpms[new_rpm.n] ||= Array.new
+
+              # we may already have this one, like when the installed list is refreshed
+              idx = @index[new_rpm.nevra]
+              if idx
+                # grab the existing package if it's not
+                curr_rpm = idx
+              else
+                @rpms[new_rpm.n] << new_rpm
+
+                new_rpm.provides.each do |provide|
+                  @provides[provide.name] ||= Array.new
+                  @provides[provide.name] << new_rpm
+                end
+
+                curr_rpm = new_rpm
+              end
+
+              # Track the nevra -> RPMPackage association to avoid having to compare versions
+              # with @rpms[new_rpm.n] on the next round
+              @index[new_rpm.nevra] = curr_rpm
+
+              # these are overwritten for existing packages
+              if new_rpm.available
+                @available << curr_rpm
+              end
+              if new_rpm.installed
+                @installed << curr_rpm
+              end
+            end
+          end
+
+          def <<(*args)
+            self.push(args)
+          end
+
+          def clear
+            @rpms.clear
+            @index.clear
+            @provides.clear
+            clear_available
+            clear_installed
+          end
+
+          def clear_available
+            @available.clear
+          end
+
+          def clear_installed
+            @installed.clear
+          end
+
+          def size
+            @rpms.size
+          end
+          alias :length :size
+
+          def available_size
+            @available.size
+          end
+
+          def installed_size
+            @installed.size
+          end
+
+          def available?(package)
+            @available.include?(package)
+          end
+
+          def installed?(package)
+            @installed.include?(package)
+          end
+
+          def whatprovides(rpmdep)
+            unless rpmdep.kind_of?(RPMDependency)
+              raise ArgumentError, "Expecting an RPMDependency object"
+            end
+
+            what = []
+
+            packages = lookup_provides(rpmdep.name)
+            if packages
+              packages.each do |pkg|
+                pkg.provides.each do |provide|
+                  if provide.satisfy?(rpmdep)
+                    what << pkg
+                  end
+                end
+              end
+            end
+
+            return what
+          end
+        end
+
+        # Cache for our installed and available packages, pulled in from yum-dump.py
+        class YumCache
+          include Chef::Mixin::Command
+          include Chef::Mixin::Which
+          include Chef::Mixin::ShellOut
+          include Singleton
+
+          def initialize
+            @rpmdb = RPMDb.new
+
+            # Next time @rpmdb is accessed:
+            #  :all       - Trigger a run of "yum-dump.py --options --installed-provides", updates
+            #               yum's cache and parses options from /etc/yum.conf. Pulls in Provides
+            #               dependency data for installed packages only - this data is slow to
+            #               gather.
+            #  :provides  - Same as :all but pulls in Provides data for available packages as well.
+            #               Used as a last resort when we can't find a Provides match.
+            #  :installed - Trigger a run of "yum-dump.py --installed", only reads the local rpm
+            #               db. Used between client runs for a quick refresh.
+            #  :none      - Do nothing, a call to one of the reload methods is required.
+            @next_refresh = :all
+
+            @allow_multi_install = []
+
+            @extra_repo_control = nil
+
+            # these are for subsequent runs if we are on an interval
+            Chef::Client.when_run_starts do
+              YumCache.instance.reload
+            end
+          end
+
+          attr_reader :extra_repo_control
+
+          # Cache management
+          #
+
+          def refresh
+            case @next_refresh
+            when :none
+              return nil
+            when :installed
+              reset_installed
+              # fast
+              opts=" --installed"
+            when :all
+              reset
+              # medium
+              opts=" --options --installed-provides"
+            when :provides
+              reset
+              # slow!
+              opts=" --options --all-provides"
+            else
+              raise ArgumentError, "Unexpected value in next_refresh: #{@next_refresh}"
+            end
+
+            if @extra_repo_control
+              opts << " #{@extra_repo_control}"
+            end
+
+            opts << " --yum-lock-timeout #{Chef::Config[:yum_lock_timeout]}"
+
+            one_line = false
+            error = nil
+
+            helper = ::File.join(::File.dirname(__FILE__), 'yum-dump.py')
+            status = nil
+
+            begin
+              status = shell_out!("#{python_bin} #{helper}#{opts}", :timeout => Chef::Config[:yum_timeout])
+              status.stdout.each_line do |line|
+                one_line = true
+
+                line.chomp!
+                if line =~ %r{\[option (.*)\] (.*)}
+                  if $1 == "installonlypkgs"
+                    @allow_multi_install = $2.split
+                  else
+                    raise Chef::Exceptions::Package, "Strange, unknown option line '#{line}' from yum-dump.py"
+                  end
+                  next
+                end
+
+                if line =~ %r{^(\S+) ([0-9]+) (\S+) (\S+) (\S+) \[(.*)\] ([i,a,r]) (\S+)$}
+                  name     = $1
+                  epoch    = $2
+                  version  = $3
+                  release  = $4
+                  arch     = $5
+                  provides = parse_provides($6)
+                  type     = $7
+                  repoid   = $8
+                else
+                  Chef::Log.warn("Problem parsing line '#{line}' from yum-dump.py! " +
+                                 "Please check your yum configuration.")
+                  next
+                end
+
+                case type
+                when "i"
+                  # if yum-dump was called with --installed this may not be true, but it's okay
+                  # since we don't touch the @available Set in reload_installed
+                  available = false
+                  installed = true
+                when "a"
+                  available = true
+                  installed = false
+                when "r"
+                  available = true
+                  installed = true
+                end
+
+                pkg = RPMDbPackage.new(name, epoch, version, release, arch, provides, installed, available, repoid)
+                @rpmdb << pkg
+              end
+
+              error = status.stderr
+            rescue Mixlib::ShellOut::CommandTimeout => e
+              Chef::Log.error("#{helper} exceeded timeout #{Chef::Config[:yum_timeout]}")
+              raise(e)
+            end
+
+            if status.exitstatus != 0
+              raise Chef::Exceptions::Package, "Yum failed - #{status.inspect} - returns: #{error}"
+            else
+              unless one_line
+                Chef::Log.warn("Odd, no output from yum-dump.py. Please check " +
+                               "your yum configuration.")
+              end
+            end
+
+            # A reload method must be called before the cache is altered
+            @next_refresh = :none
+          end
+
+          def python_bin
+            yum_executable = which("yum")
+            if yum_executable && shabang?(yum_executable)
+              extract_interpreter(yum_executable)
+            else
+              Chef::Log.warn("Yum executable not found or doesn't start with #!. Using default python.")
+              "/usr/bin/python"
+            end
+          rescue StandardError => e
+            Chef::Log.warn("An error occured attempting to determine correct python executable. Using default.")
+            Chef::Log.debug(e)
+            "/usr/bin/python"
+          end
+
+          def extract_interpreter(file)
+            ::File.open(file, 'r', &:readline)[2..-1].chomp
+          end
+
+          def shabang?(file)
+            ::File.open(file, 'r') do |f|
+              f.read(2) == '#!'
+            end
+          rescue Errno::ENOENT
+            false
+          end
+
+          def reload
+            @next_refresh = :all
+          end
+
+          def reload_installed
+            @next_refresh = :installed
+          end
+
+          def reload_provides
+            @next_refresh = :provides
+          end
+
+          def reset
+            @rpmdb.clear
+          end
+
+          def reset_installed
+            @rpmdb.clear_installed
+          end
+
+          # Querying the cache
+          #
+
+          # Check for package by name or name+arch
+          def package_available?(package_name)
+            refresh
+
+            if @rpmdb.lookup(package_name)
+              return true
+            else
+              if package_name =~ %r{^(.*)\.(.*)$}
+                pkg_name = $1
+                pkg_arch = $2
+
+                if matches = @rpmdb.lookup(pkg_name)
+                  matches.each do |m|
+                    return true if m.arch == pkg_arch
+                  end
+                end
+              end
+            end
+
+            return false
+          end
+
+          # Returns a array of packages satisfying an RPMDependency
+          def packages_from_require(rpmdep)
+            refresh
+            @rpmdb.whatprovides(rpmdep)
+          end
+
+          # Check if a package-version.arch is available to install
+          def version_available?(package_name, desired_version, arch=nil)
+            version(package_name, arch, true, false) do |v|
+              return true if desired_version == v
+            end
+
+            return false
+          end
+
+          # Return the source repository for a package-version.arch
+          def package_repository(package_name, desired_version, arch=nil)
+            package(package_name, arch, true, false) do |pkg|
+              return pkg.repoid if desired_version == pkg.version.to_s
+            end
+
+            return nil
+          end
+
+          # Return the latest available version for a package.arch
+          def available_version(package_name, arch=nil)
+            version(package_name, arch, true, false)
+          end
+          alias :candidate_version :available_version
+
+          # Return the currently installed version for a package.arch
+          def installed_version(package_name, arch=nil)
+            version(package_name, arch, false, true)
+          end
+
+          # Return an array of packages allowed to be installed multiple times, such as the kernel
+          def allow_multi_install
+            refresh
+            @allow_multi_install
+          end
+
+          def enable_extra_repo_control(arg)
+            # Don't touch cache if it's the same repos as the last load
+            unless @extra_repo_control == arg
+              @extra_repo_control = arg
+              reload
+            end
+          end
+
+          def disable_extra_repo_control
+            # Only force reload when set
+            if @extra_repo_control
+              @extra_repo_control = nil
+              reload
+            end
+          end
+
+          private
+
+          def version(package_name, arch=nil, is_available=false, is_installed=false)
+            package(package_name, arch, is_available, is_installed) do |pkg|
+              if block_given?
+                yield pkg.version.to_s
+              else
+                # first match is latest version
+                return pkg.version.to_s
+              end
+            end
+
+            if block_given?
+              return self
+            else
+              return nil
+            end
+          end
+
+          def package(package_name, arch=nil, is_available=false, is_installed=false)
+            refresh
+            packages = @rpmdb[package_name]
+            if packages
+              packages.each do |pkg|
+                if is_available
+                  next unless @rpmdb.available?(pkg)
+                end
+                if is_installed
+                  next unless @rpmdb.installed?(pkg)
+                end
+                if arch
+                  next unless pkg.arch == arch
+                end
+
+                if block_given?
+                  yield pkg
+                else
+                  # first match is latest version
+                  return pkg
+                end
+              end
+            end
+
+            if block_given?
+              return self
+            else
+              return nil
+            end
+          end
+
+          # Parse provides from yum-dump.py output
+          def parse_provides(string)
+            ret = []
+            # ['atk = 1.12.2-1.fc6', 'libatk-1.0.so.0']
+            string.split(", ").each do |seg|
+              # 'atk = 1.12.2-1.fc6'
+              if seg =~ %r{^'(.*)'$}
+                ret << RPMProvide.parse($1)
+              end
+            end
+
+            return ret
+          end
+
+        end # YumCache
+
+        include Chef::Mixin::GetSourceFromPackage
+
+        def initialize(new_resource, run_context)
+          super
+
+          @yum = YumCache.instance
+        end
+
+        # Extra attributes
+        #
+
+        def arch_for_name(n)
+          if @new_resource.respond_to?("arch")
+            @new_resource.arch
+          elsif @arch
+            idx = package_name_array.index(n)
+            as_array(@arch)[idx]
+          else
+            nil
+          end
+        end
+
+        def arch
+          if @new_resource.respond_to?("arch")
+            @new_resource.arch
+          else
+            nil
+          end
+        end
+
+        def set_arch(arch)
+          if @new_resource.respond_to?("arch")
+            @new_resource.arch(arch)
+          end
+        end
+
+        def flush_cache
+          if @new_resource.respond_to?("flush_cache")
+            @new_resource.flush_cache
+          else
+            { :before => false, :after => false }
+          end
+        end
+
+        # Helpers
+        #
+
+        def yum_arch(arch)
+          arch ? ".#{arch}" : nil
+        end
+
+        def yum_command(command)
+          Chef::Log.debug("#{@new_resource}: yum command: \"#{command}\"")
+          status = shell_out(command, {:timeout => Chef::Config[:yum_timeout]})
+
+          # This is fun: rpm can encounter errors in the %post/%postun scripts which aren't
+          # considered fatal - meaning the rpm is still successfully installed. These issue
+          # cause yum to emit a non fatal warning but still exit(1). As there's currently no
+          # way to suppress this behavior and an exit(1) will break a Chef run we make an
+          # effort to trap these and re-run the same install command - it will either fail a
+          # second time or succeed.
+          #
+          # A cleaner solution would have to be done in python and better hook into
+          # yum/rpm to handle exceptions as we see fit.
+          if status.exitstatus == 1
+            status.stdout.each_line do |l|
+              # rpm-4.4.2.3 lib/psm.c line 2182
+              if l =~ %r{^error: %(post|postun)\(.*\) scriptlet failed, exit status \d+$}
+                Chef::Log.warn("#{@new_resource} caught non-fatal scriptlet issue: \"#{l}\". Can't trust yum exit status " +
+                               "so running install again to verify.")
+                status = shell_out(command, {:timeout => Chef::Config[:yum_timeout]})
+                break
+              end
+            end
+          end
+
+          if status.exitstatus > 0
+            command_output = "STDOUT: #{status.stdout}\nSTDERR: #{status.stderr}"
+            raise Chef::Exceptions::Exec, "#{command} returned #{status.exitstatus}:\n#{command_output}"
+          end
+        end
+
+        # Standard Provider methods for Parent
+        #
+
+        def load_current_resource
+          if flush_cache[:before]
+            @yum.reload
+          end
+
+          if @new_resource.options
+            repo_control = []
+            @new_resource.options.split.each do |opt|
+              if opt =~ %r{--(enable|disable)repo=.+}
+                repo_control << opt
+              end
+            end
+
+            if repo_control.size > 0
+              @yum.enable_extra_repo_control(repo_control.join(" "))
+            else
+              @yum.disable_extra_repo_control
+            end
+          else
+            @yum.disable_extra_repo_control
+          end
+
+          # At this point package_name could be:
+          #
+          # 1) a package name, eg: "foo"
+          # 2) a package name.arch, eg: "foo.i386"
+          # 3) or a dependency, eg: "foo >= 1.1"
+
+          # Check if we have name or name+arch which has a priority over a dependency
+          package_name_array.each_with_index do |n, index|
+            unless @yum.package_available?(n)
+              # If they aren't in the installed packages they could be a dependency
+              dep = parse_dependency(n, new_version_array[index])
+              if dep
+                if @new_resource.package_name.is_a?(Array)
+                  @new_resource.package_name(package_name_array - [n] + [dep.first])
+                  @new_resource.version(new_version_array - [new_version_array[index]] + [dep.last]) if dep.last
+                else
+                  @new_resource.package_name(dep.first)
+                  @new_resource.version(dep.last) if dep.last
+                end
+              end
+            end
+          end
+
+
+          @current_resource = Chef::Resource::Package.new(@new_resource.name)
+          @current_resource.package_name(@new_resource.package_name)
+
+          installed_version = []
+          @candidate_version = []
+          @arch = []
+          if @new_resource.source
+            unless ::File.exists?(@new_resource.source)
+              raise Chef::Exceptions::Package, "Package #{@new_resource.name} not found: #{@new_resource.source}"
+            end
+
+            Chef::Log.debug("#{@new_resource} checking rpm status")
+            shell_out!("rpm -qp --queryformat '%{NAME} %{VERSION}-%{RELEASE}\n' #{@new_resource.source}", :timeout => Chef::Config[:yum_timeout]).stdout.each_line do |line|
+              case line
+              when /([\w\d_.-]+)\s([\w\d_.-]+)/
+                @current_resource.package_name($1)
+                @new_resource.version($2)
+              end
+            end
+            @candidate_version << @new_resource.version
+            installed_version << @yum.installed_version(@current_resource.package_name, arch)
+          else
+
+            package_name_array.each_with_index do |pkg, idx|
+              # Don't overwrite an existing arch
+              if arch
+                name, parch = pkg, arch
+              else
+                name, parch = parse_arch(pkg)
+                # if we parsed an arch from the name, update the name
+                # to be just the package name.
+                if parch
+                  if @new_resource.package_name.is_a?(Array)
+                    @new_resource.package_name[idx] = name
+                  else
+                    @new_resource.package_name(name)
+                    # only set the arch if it's a single package
+                    set_arch(parch)
+                  end
+                end
+              end
+
+              if @new_resource.version
+                new_resource =
+                  "#{@new_resource.package_name}-#{@new_resource.version}#{yum_arch(parch)}"
+              else
+                new_resource = "#{@new_resource.package_name}#{yum_arch(parch)}"
+              end
+              Chef::Log.debug("#{@new_resource} checking yum info for #{new_resource}")
+              installed_version << @yum.installed_version(name, parch)
+              @candidate_version << @yum.candidate_version(name, parch)
+              @arch << parch
+            end
+          end
+
+          if installed_version.size == 1
+            @current_resource.version(installed_version[0])
+            @candidate_version = @candidate_version[0]
+            @arch = @arch[0]
+          else
+            @current_resource.version(installed_version)
+          end
+
+          Chef::Log.debug("#{@new_resource} installed version: #{installed_version || "(none)"} candidate version: " +
+                          "#{@candidate_version || "(none)"}")
+
+          @current_resource
+        end
+
+        def install_remote_package(name, version)
+          # Work around yum not exiting with an error if a package doesn't exist
+          # for CHEF-2062
+          all_avail = as_array(name).zip(as_array(version)).any? do |n, v|
+            @yum.version_available?(n, v, arch_for_name(n))
+          end
+          method = log_method = nil
+          methods = []
+          if all_avail
+            # More Yum fun:
+            #
+            # yum install of an old name+version will exit(1)
+            # yum install of an old name+version+arch will exit(0) for some reason
+            #
+            # Some packages can be installed multiple times like the kernel
+            as_array(name).zip(as_array(version)).each do |n, v|
+              method = "install"
+              log_method = "installing"
+              idx = package_name_array.index(n)
+              unless @yum.allow_multi_install.include?(n)
+                if RPMVersion.parse(current_version_array[idx]) > RPMVersion.parse(v)
+                  # We allow downgrading only in the evenit of single-package
+                  # rules where the user explicitly allowed it
+                  if allow_downgrade
+                    method = "downgrade"
+                    log_method = "downgrading"
+                  else
+                    # we bail like yum when the package is older
+                    raise Chef::Exceptions::Package, "Installed package #{n}-#{current_version_array[idx]} is newer " +
+                                                     "than candidate package #{n}-#{v}"
+                  end
+                end
+              end
+              # methods don't count for packages we won't be touching
+              next if RPMVersion.parse(current_version_array[idx]) == RPMVersion.parse(v)
+              methods << method
+            end
+
+            # We could split this up into two commands if we wanted to, but
+            # for now, just don't support this.
+            if methods.uniq.length > 1
+              raise Chef::Exceptions::Package, "Multipackage rule #{name} has a mix of upgrade and downgrade packages. Cannot proceed."
+            end
+
+            repos = []
+            pkg_string_bits = []
+            as_array(name).zip(as_array(version)).each do |n, v|
+              idx = package_name_array.index(n)
+              a = arch_for_name(n)
+              s = ''
+              unless v == current_version_array[idx]
+                s = "#{n}-#{v}#{yum_arch(a)}"
+                repo = @yum.package_repository(n, v, a)
+                repos << "#{s} from #{repo} repository"
+                pkg_string_bits << s
+              end
+            end
+            pkg_string = pkg_string_bits.join(' ')
+            Chef::Log.info("#{@new_resource} #{log_method} #{repos.join(' ')}")
+            yum_command("yum -d0 -e0 -y#{expand_options(@new_resource.options)} #{method} #{pkg_string}")
+          else
+            raise Chef::Exceptions::Package, "Version #{version} of #{name} not found. Did you specify both version " +
+                                             "and release? (version-release, e.g. 1.84-10.fc6)"
+          end
+        end
+
+        def install_package(name, version)
+          if @new_resource.source
+            yum_command("yum -d0 -e0 -y#{expand_options(@new_resource.options)} localinstall #{@new_resource.source}")
+          else
+            install_remote_package(name, version)
+          end
+
+          if flush_cache[:after]
+            @yum.reload
+          else
+            @yum.reload_installed
+          end
+        end
+
+        # Keep upgrades from trying to install an older candidate version. Can happen when a new
+        # version is installed then removed from a repository, now the older available version
+        # shows up as a viable install candidate.
+        #
+        # Can be done in upgrade_package but an upgraded from->to log message slips out
+        #
+        # Hacky - better overall solution? Custom compare in Package provider?
+        def action_upgrade
+          # Could be uninstalled or have no candidate
+          if @current_resource.version.nil? || !candidate_version_array.any?
+            super
+          elsif candidate_version_array.zip(current_version_array).any? do |c, i|
+                  RPMVersion.parse(c) > RPMVersion.parse(i)
+                end
+            super
+          else
+            Chef::Log.debug("#{@new_resource} is at the latest version - nothing to do")
+          end
+        end
+
+        def upgrade_package(name, version)
+          install_package(name, version)
+        end
+
+        def remove_package(name, version)
+          if version
+            remove_str = as_array(name).zip(as_array(version)).map do |n, v|
+              a = arch_for_name(n)
+              "#{[n, v].join('-')}#{yum_arch(a)}"
+            end.join(' ')
+          else
+            remove_str = as_array(name).map do |n|
+              a = arch_for_name(n)
+              "#{n}#{yum_arch(a)}"
+            end.join(' ')
+          end
+          yum_command("yum -d0 -e0 -y#{expand_options(@new_resource.options)} remove #{remove_str}")
+
+          if flush_cache[:after]
+            @yum.reload
+          else
+            @yum.reload_installed
+          end
+        end
+
+        def purge_package(name, version)
+          remove_package(name, version)
+        end
+
+        private
+
+        def parse_arch(package_name)
+          # Allow for foo.x86_64 style package_name like yum uses in it's output
+          #
+          if package_name =~ %r{^(.*)\.(.*)$}
+            new_package_name = $1
+            new_arch = $2
+            # foo.i386 and foo.beta1 are both valid package names or expressions of an arch.
+            # Ensure we don't have an existing package matching package_name, then ensure we at
+            # least have a match for the new_package+new_arch before we overwrite. If neither
+            # then fall through to standard package handling.
+            old_installed = @yum.installed_version(package_name)
+            old_candidate = @yum.candidate_version(package_name)
+            new_installed = @yum.installed_version(new_package_name, new_arch)
+            new_candidate = @yum.candidate_version(new_package_name, new_arch)
+            if (old_installed.nil? and old_candidate.nil?) and (new_installed or new_candidate)
+              Chef::Log.debug("Parsed out arch #{new_arch}, new package name is #{new_package_name}")
+              return new_package_name, new_arch
+            end
+          end
+          return package_name, nil
+        end
+
+        # If we don't have the package we could have been passed a 'whatprovides' feature
+        #
+        # eg: yum install "perl(Config)"
+        #     yum install "mtr = 2:0.71-3.1"
+        #     yum install "mtr > 2:0.71"
+        #
+        # We support resolving these out of the Provides data imported from yum-dump.py and
+        # matching them up with an actual package so the standard resource handling can apply.
+        #
+        # There is currently no support for filename matching.
+        def parse_dependency(name,version)
+          # Transform the package_name into a requirement
+
+          # If we are passed a version or a version constraint we have to assume it's a requirement first. If it can't be
+          # parsed only yum_require.name will be set and @new_resource.version will be left intact
+          if version
+            require_string = "#{name} #{version}"
+          else
+            # Transform the package_name into a requirement, might contain a version, could just be
+            # a match for virtual provides
+            require_string = name
+          end
+          yum_require = RPMRequire.parse(require_string)
+          # and gather all the packages that have a Provides feature satisfying the requirement.
+          # It could be multiple be we can only manage one
+          packages = @yum.packages_from_require(yum_require)
+
+          if packages.empty?
+            # Don't bother if we are just ensuring a package is removed - we don't need Provides data
+            actions = Array(@new_resource.action)
+            unless actions.size == 1 and (actions[0] == :remove || actions[0] == :purge)
+              Chef::Log.debug("#{@new_resource} couldn't match #{@new_resource.package_name} in " +
+                            "installed Provides, loading available Provides - this may take a moment")
+              @yum.reload_provides
+              packages = @yum.packages_from_require(yum_require)
+            end
+          end
+
+          unless packages.empty?
+            new_package_name = packages.first.name
+            new_package_version = packages.first.version.to_s
+            debug_msg = "#{name}: Unable to match package '#{name}' but matched #{packages.size} "
+            debug_msg << (packages.size == 1 ? "package" : "packages")
+            debug_msg << ", selected '#{new_package_name}' version '#{new_package_version}'"
+            Chef::Log.debug(debug_msg)
+
+            # Ensure it's not the same package under a different architecture
+            unique_names = []
+            packages.each do |pkg|
+              unique_names << "#{pkg.name}-#{pkg.version.evr}"
+            end
+            unique_names.uniq!
+
+            if unique_names.size > 1
+              Chef::Log.warn("#{@new_resource} matched multiple Provides for #{@new_resource.package_name} " +
+                             "but we can only use the first match: #{new_package_name}. Please use a more " +
+                             "specific version.")
+            end
+
+            if yum_require.version.to_s.nil?
+              new_package_version = nil
+            end
+
+            [new_package_name,new_package_version]
+          end
+        end
+
+      end
+    end
+  end
+end